Top 1200 bureau of indian standards bis PDF Book Page 6
IS 15777: Selection of hacksaw tooth for metal cutting - Recommendations
Bureau of Indian Standards
·2008
·2.3 MB
IS 12082-2: Control of Asbestos Emission - Recommendations, Part 2: Milling of Asbestos Ore
Bureau of Indian Standards
·2006
·1.3 MB
IS 6683: Diameters of wires for platinum group metals and their alloys
Bureau of Indian Standards
·7 Pages
·1998
·0.93 MB
IS 7512: Method for the determination of average particle size of metal powders by fisher sub-sieve sizer
Bureau of Indian Standards
·2006
·1.2 MB
IS 13696: Interconnection of Radio and TV Receivers
Bureau of Indian Standards
·10 Pages
·1993
·1 MB
IS 6489-2: Textiles – Tear Properties of Fabrics, Part 2: Determination of Tear Force of Trouser Shaped Test Specimens (Single Tear Method)
Bureau of Indian Standards
·2011
·1 MB
IS 14529: Chemical Analysis of Ferrosilicon-Magnesium Alloy
Bureau of Indian Standards
·2004
·1.1 MB
IS 13659: Polyglycerol Esters of Interesterified Ricinoleic Acid, Food Grade
Bureau of Indian Standards
·10 Pages
·1993
·1.2 MB
IS 15177: Surface Covered Cultivation - Plastics Mulching - Code of Practice
Bureau of Indian Standards
·8 Pages
·2002
·1.1 MB
IS 15529: Citrus fruits and derived products - Determination of essential oils content (reference method)
Bureau of Indian Standards
·2004
·0.98 MB
IS 12308-7: Methods for Chemical Analysis of Cast Iron and Pig Iron, Part 7: Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent)
Bureau of Indian Standards
·9 Pages
·1991
·1.1 MB
IS 14610: Automotive vehicles - Fuel consumption on chassis dynamometer - Method of measurement
Bureau of Indian Standards
·9 Pages
·1999
·1.1 MB
IS 3708-1: Methods of Test for Natural Rubber Latex, Part 1: Determination of Dry Rubber Content
Bureau of Indian Standards
·2013
·0.16 MB
IS 9457: Safety colours and safety signs - Code of Practice
Bureau of Indian Standards
·2005
·1.6 MB
IS 13617: Evaluation of pressure drop versus flow characteristics of pneumatic filters - Method of test
Bureau of Indian Standards
·9 Pages
·1992
·1 MB
IS 12432-3: Application of Spray Applied Insulation - Code of Practice, Part 3: Polyurethane/Polyisocyanurate
Bureau of Indian Standards
·11 Pages
·2002
·1.1 MB
IS 5421: Glossary of terms relating to test sieves and test sieving
Bureau of Indian Standards
·2013
·0.1 MB
IS 14508: Oil of Jamrosa
Bureau of Indian Standards
·10 Pages
·1998
·1.1 MB
IS 14644-7: Nickel Alloys - Flame Atomic Absorption Spectrometric Analysis - Method, Part 7: Determination of Aluminium Content
Bureau of Indian Standards
·10 Pages
·2000
·1.1 MB
IS 11999: Method for determination of plastic strain ratio 'r' for steel metals
Bureau of Indian Standards
·2007
·1.1 MB
IS 12375-9: Implants for surgery - Partial and total hip joint prostheses, Part 9: Determination of resistance to torque of head fixation of stemmed femoral components
Bureau of Indian Standards
·9 Pages
·1998
·1.1 MB
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
