Table Of Content

Journal of Materials Processing alle act Technology ELS IER Journal of Materials Processing Technology 95 (1999) 275 www.elsevier.cony tocate/|matprote Author Index of Volume 95 Ainsley, C., 201 Hwa Yan, B., 222 Altan, T., 17 Qichang, I Arauco, E.S., 139 im, C:5;,. 153 Im, Y.T., 262 Swiatoniowsl Bay, N., 40 Sato. T.. 133 Besshi, T., 133 Jang, J.L., 78 Shimizu. K Bhattacharyya, B., 145 Jehng, W.-K., 169 Skov-Hansen Brondsted, P., 40 José Montecinos, R., | Sobkow Joun, M.S., 155 Sorkhel. S.K.. 1 Cartwright, D., 49 Srinivasan. K.. 1$ Cerett,.E., 17 Kim, H.S., 262 Chang, C.C., 128 Kim, J.H., 155 Chi-hang Lui, O. Ko, B.-C., 210 Chou, S.-S., 65 Kolmogorov, V.L., 55 Choudhury, I.A., Chung Wang, C Cortes; C., 122 Cur, Pi. 232 Liu, J.- Lu, P.C Doloi, B.N., 145 Lucchi, M., 17 Drake, P.R., 49 Mahdi, M., 238 El-Baradie, M.A., Matsuoka, S.-i Elgueta, M., 122 Mischke, J., 97 Mori, K., 116 Fedotov, V.P., 55 Mot, A.C.K., 1° Murugan, N., Gilormini, P., 2 Godwin, M.J., Nefussi, G., 2 Gong, H., 201 Nian, C.Y., 90 Gorshkov, A.V., 55 Gronbek, J., 40 Oh, H.-K., 8, 10 Guangchun, W., 112 Oki, Y., 83 Gunaraj, V., 246 Guogqun, Z., 112 Park, G.-S., 210 Persson, U., 10% Hatta, N., 116 Pietrzykowski Hou, J.J., 232 Proslier, | Elsevier Science S.A. PII: S0924-0136(99)00388-X Journal of Materials Processing Technology we. R Journal of Materials Processing Technology 95 (1999) 277-280 www.elsevier.cony locate/jmatprot Subject Index of Volume 95 Adiabatic heating Carbon concentration Hardness-stress—strain correlation in titanium open die extrusion: The influence of atmospheric humidity on the friction and wear of an alternative to visioplasticity, 185 carbon steels, 10 Advanced ceramics Chemical composition Experimental investigations into electrochemical discharge The control of the chemical composition, microstructure and machining (ECDM) of non-conductive ceramic materials, mechanical properties of beinite ductile iron for liner plates, 145 pH Air relative humidity Chip formation The influence of atmospheric humidity on the friction and wear of FEM simulation of orthogonal cutting: serrated chip formation, carbon steels, 10 17 Aluminum alloy Chip-volume High-speed end milling of an articulated robot and its character- Analysis of grinding quantities through chip sizes, | istics, 83 Cold forging Analysis of variance an expert system for cold forging process design based on a depth- Optimization of turning operations with multiple performance first search, 262 characteristics, 90 Fatigue in cold-forging dies: tool life analysis, 40 Annealing effect Cold-former forging The effect of annealing on improving the quality of lead zirconate Computer aided process design in cold-former forging using a titanate thin films on Pt/SiO,/Si substrates, 128 forging simulator and a commercial CAD software, 155 Applied voltage Cold-roll forming Experimental investigations into electrochemical discharge Simulation of the cold-roil forming of circular tubes, 216 machining (ECDM) of non-conductive ceramic materials, 145 Commercially pure titanium Arc current Study on the microstructure and formability of commercially pure Prediction and comparison of the area of the heat-affected zone for titanium in two-temperature deep drawing, 65 the bead-on-plate and bead-on-joint in submerged arc welding Container of pipes, 246 Development of a new pressure sensor and its application to the Arc voltage measurement of contacting stress in extrusion, 71] Prediction and comparison of the area of the heat-affected zone for Coons patch the bead-on-plate and bead-on-joint in submerged arc welding Simulation of the cold-roll forming of circular tubes, 216 of pipes, 246 Copper tubes Articulated robot An investigation into the rolling process of copper tubes, 139 High-speed end milling of an articulated robot and its character- Corrosion—abrasion wear resistance istics, 83 An investigation of the corrosion—abrasion wear behavior of 6% Automatic computer simulation chromium martensitic cast steel, 180 Computer aided process design in cold-former forging using Coupling effect forging simulator and a commercial CAD software, 155 residual stresses in ground components caused by coupled thermal Automotive and mechanical plastic deformation, 238 A method for comparing the performance of low-cost press tools for Critical strain sheet forming, 49 The effects of SiC particle volume fraction on the microstructure and hot workability of SiCp/AA 2024 composites, 210 Bead-on-plate Cutting force Prediction and comparison of the area of the heat-affected zone for High-speed end milling of an articulated robot and its character- the bead-on-plate and bead-on-joint in submerged arc welding istics, 83 of pipes, 246 Optimization of turning operations with multiple performance Beinite characteristics, 90 The control of the chemical composition, microstructure and Cutting speed mechanical properties of beinite ductile iron for liner plates, Optimization of turning operations with multiple performance 27 characteristics, 90 BP network Cutting tool research on prediction of the processing parameters of liquid A study of the active vibration control of a cutting tool, 78 extrusion by bp network, 232 Cutting Brown gas FEM simulation of orthogonal cutting: serrated chip formation, Some comments on implosion and Brown gas, 8 17 Elsevier Science S.A. PII: S0924-0136(99)00387-8 Subject Index of Volume 95 Damage Flow strain Application of continuum damage theory in metalforming pro- The effects of SiC particle volume fraction on the microstructure cesses, 122 and hot workability of SiCp/AA 2024 composites, 210 FEM simulation of orthogonal cutting: serrated chip formation, 17 Flow stress Damping force The effects of SiC particle volume fraction on the microstructure \ study of the active vibration control of a cutting tool, 78 and hot workability of SiCp/AA 2024 composites, 210 Deformation analysis Forces on the tool material contact surface \ three-dimensional rigid—plastic FEM analysis of rotary forging Contributory study on error estimation in measurements of stress deformation of a ring workpiece, 112 distributions on the contact surface for plastically deformed Depth of cut metal, 97 Optimization of turning operations with multiple performance Formability characteristics, 90 A method for comparing the performance of low-cost press tools for Depth-first search sheet forming, 49 an expert system for cold forging process design based on a depth- Forming limit first search, 262 The application of some criteria for ductile fracture to the prediction Detail process design of the forming limit of sheet metals, 116 Computer aided process design in cold-former forging using a Free-form surface forging simulator and a commercial CAD software, 155 robotic polishing of free-form surfaces using scanning paths, Ductile fracture criteria 19] he application of some criteria for ductile fracture to the prediction Friction of the forming limit of sheet metals, 116 Development of a new pressure sensor and its application to the Dynamic recrystallization measurement of contacting stress in extrusion, 71 The effects of SiC particle volume fraction on the microstructure FWHM and hot workability of SiCp/AA 2024 composites, 210 The effect of annealing on improving the quality of lead zirconate titanate thin films on Pt/Si0,/Si substrates, 128 EDM The machining characteristics of Al,O;/6061Al composite using Gear set with skew axes rotary electro-discharge machining with a tube electrode, 222 Rapid prototyping and manufacturing technology applied to the EDM-drilling forming of spherical gear sets with skew axes, 169 The machining characteristics of Al,O;/6061Al composite using Green machining rotary electro-discharge machining with a tube electrode, 222 Machining of alumina green bodies and their dewaxing, 133 Electrochemical discharge machining (ECDM) Grinding chips Experimental investigations into’ electrochemical discharge Analysis of grinding quantities through chip sizes, machining (ECDM) of non-conductive ceramic materials, 145 Grinding Electrode wear rate residual stresses in ground components caused by coupled thermal The machining characteristics of Al,O;/6061Al composite using and mechanical plastic deformation, 238 rotary electro-discharge machining with a tube electrode, 222 Groove-cutting test Electrolyte concentration Machining of alumina green bodies and their dewaxing, 133 Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials, 145 HAZ Expert system Prediction and comparison of the area of the heat-affected zone fot an expert system for cold forging process design based on a depth- the bead-on-plate and bead-on-joint in submerged arc welding first search, 262 of pipes, 246 Extrusion Heat input Development of a new pressure sensor and its application to the Prediction and comparison of the area of the heat-affected zone for measurement of contacting Stress in extrusion, l the bead-on-plate and bead-on-joint in submerged are welding of pipes, 246 -Far infrared rays Heterogeneous deformation Some comments on implosion and Brown gas, 8 Hardness-—stress—strain correlation in titanium open die extrusion: Fatigue an alternative to visioplasticity, 185 Fatigue in cold-forging dies: tool life analysis, 40 High-speed end milling Feed rate High-speed end milling of an articulated robot and its character- Optimization of turning operations with multiple performance istics, 83 characteristics, 90 Hot restoration FEM The effects of SiC particle volume fraction on the microstructure \ three-dimensional rigid—plastic FEM analysis of rotary forging and hot workability of SiCp/AA 2024 composites, 210 deformation of a ring workpiece, 112 lhe application of some criteria for ductile fracture to the prediction Implosion of the forming limit of sheet metals, 116 Some comments on implosion and Brown gas, 8 Fibre Inconel 718 \ fibre-optic surface-roughness sensor, 107 Machinability assessment of inconel 718 by factorial design of Finite element simulation experiment coupled with response surface methodology, 30 Application of continuum damage theory in metalforming pro- Injection moulding cesses, 122 Precision sintering of slip cast components, 201 An investigation into the rolling process of copper tubes, 139 Instantaneous skew axis (ISA) Finite-element method Rapid prototyping and manufacturing technology applied to the FEM simulation of orthogonal cutting: serrated chip formation, forming of spherical gear sets with skew axes, 169 Subject Index of Volume 95 Laser cutting Parallelepiped CO, laser cutting of metallic coated sheet steels, 164 rhree-dimensional analysis of the stress Life analysis of plastic deformation of metals, 55 Fatigue in cold-forging dies: tool life analysis, 40 Penetration Light scattering Prediction and comparison of the are A fibre-optic surface-roughness sensor, 107 the bead-on-plate and bead-on-joint in submerged : Linear plates of pipes, 246 The control of the chemical composition, microstructure Perovskite phase mechanical properties of beinite ductile iron for liner plates, 27 The effect of annealing on improving the quality Liquid extrusion titanate thin films on Pt/SiO,/Si substrates, research on prediction of the processing parameters of liquid pH value extrusion by bp network, 232 An investigation of the corrosion Loose abrasive chromium martensitic cast robotic polishing of free-form surfaces using scanning paths, 191 Piezoelectric actuator A study of the active vibration control of Machined surface Pin gauges A fibre-optic surface-roughness sensor, 107 Contributory study on error estimat Martensitic cast steel distributions on the contact surfa An investigation of the corrosion—abrasion wear behavior of 6% metal, 97 chromium martensitic cast steel, 180 Plastic deformation Material removal rate residual stresses in ground components caused by The machining characteristics of Al,O;/6061Al composite using and mechanical plastic deformation, 238 rotary electro-discharge machining with a tube electrode, 222 Precision Materials Precision sintering of Fatigue in cold-forging dies: tool life analysis, 40 Press-forming Measurement A method for comparing the | Development of a new pressure sensor and its application to the sheet forming, 49 measurement of contacting stress in extrusion, 71 Pressure sensor Mechanical loading Development of residual stresses in ground components caused by coupled thermal measurement of contact and mechanical plastic deformation, 238 Pireosc ess parametesirs se >] > Mechanical properties CO, , ]l asero rec utting+ of Prediction and comparison of the area of the heat-affected zone for Process parameters the bead-on-plate and bead-on-joint in submerged arc welding rreesceeaarrcchh ownm nprreeddiicc tion of pipes, 246 extrusion by bp net Metal removal rate (MRR) ProOcCee SS sesqauneennccee gdeesciigon Experimental investigations into electrochemical process machining (ECDM) of non-conductive ceramic materials, Metalforming Application of continuum damage theory in metalforming cesses, 122 Metallic coated sheet steels CO, laser cutting of metallic coated sheet steels, 164 Micro-structure Prediction and comparison of the area of the heat-affected zone for the bead-on-plate and bead-on-joint in submerged arc welding of pipes, 246 Mild wear The influence of atmospheric humidity on the fr Rapid prototyping carbon steels, 10 Rapid Natural frequency Rapid tooling High-speed end milling of an articulated robot and its character- Irree cisiOonn si<nci nt istics, 83 Regression analysis Nomogram Prediction and compar! Hardness-stress—strain correlation in titanium open die extrusion the bead-on-plate an alternative to visioplasticity, 185 of pipes, 246 Residual stresses Open die extrusion residual stresses in ground components caused Hardness-stress-strain correlation in titanium open die extrusion and mechanical plastic deformation, 238 an alternative to visioplasticity, 185 Response surface methodology Orthogonal array Machinability assessment of inconel 718 by factorial design Optimization of turning operations with multiple performance of experiment coupled with response surface methodology characteristics, 90 30 Oxidation wear Ring workpiece The influence of atmospheric humidity on the friction and wear of A three-dimensional rigid—plastic FEM analysis of rotary forging carbon steels, 10 deformation of a ring workpiece, 112 280 Subject Index of Volume 95 Robotic polishing The machining characteristics of Al,O3/6061Al composite using robotic polishing of free-form surfaces using scanning paths, rotary electro-discharge machining with a tube electrode, 222 19] Surface waviness Rotary forging robotic polishing of free-form surfaces using scanning paths, 191 A three-dimensional rigid—plastic FEM analysis of rotary forging deformation of a ring workpiece, 112 Thermal loading residual stresses in ground components caused by coupled thermal SAW and mechanical plastic deformation, 238 Prediction and comparison of the area of the heat-affected zone for Thin film the bead-on-plate and bead-on-joint in submerged arc welding The effect of annealing on improving the quality of lead zirconate of pipes, 246 titanate thin films on Pt/SiO,/Si substrates, 128 Severe wear Three-dimensional printing (3DP) The influence of atmospheric humidity on the friction and wear of Rapid prototyping and manufacturing technology applied to the carbon steels, 10 forming of spherical gear sets with skew axes, 169 Shearing test Tool life Machining of alumina green bodies and their dewaxing, 133 Optimization of turning operations with multiple performance Sheet metal forming characteristics, 90 The application of some criteria for ductile fracture to the prediction Tool path of the forming limit of sheet metals, 116 robotic polishing of free-form surfaces using scanning paths, 191 Sheet metal processing Tooling CO, laser cutting of metallic coated sheet steels, 164 A method for comparing the performance of low-cost press tools for Sintering sheet forming, 49 Precision sintering of slip cast components, 201 Tools Slip casting Fatigue in cold-forging dies: tool life analysis, 40 Precision sintering of slip cast components, 201 Tube rolling Solid-model An investigation into the rolling process of copper tubes, 139 Rapid prototyping and manufacturing technology applied to the Two-temperature deep drawing forming of spherical gear sets with skew axes, 169 Study on the microstructure and formability of commercially pure Speed-feed planes titanium in two-temperature deep drawing, 65 Machinability assessment of inconel 718 by factorial design of experiment coupled with response surface methodology, 30 Vibration Control Steel A study of the active vibration control of a cutting tool, 78 A method for comparing the performance of low-cost press tools for Virtual velocity sheet forming, 49 Three-dimensional analysis of the stress-strain state in the process Stress—strain state of plastic deformation of metals, 55 Three-dimensional analysis of the stress—strain state in the process of plastic deformation of metals, 55 Weld metal Surface finish Prediction and comparison of the area of the heat-affected zone for Optimization of turning operations with multiple performance the bead-on-plate and bead-on-joint in submerged arc welding characteristics, 90 of pipes, 246 Surface roughness Work-hardening rate A fibre-optic surface-roughness sensor, 107 The effects of SiC particle volume fraction on the microstructure robotic polishing of free-form surfaces using scanning paths, 191 and hot workability of SiCp/AA 2024 composites, 210