Table Of Content

Journal of Materials Processing Technology Journal of Materials Processing Technology 78 (1998) 211 Author Index of Volume 78 Absi-Alfaro, S.C., 24 Hernas, A., 90 Rieiro, I., 177 Alush, H., 3 Robert, M.H., 198 Anton, N., 12 JonSta, Z., 90 Ruano, O.A., 177 Arrieux, R., 190 Ruiz-Prieto, J.M., 12 Katz, Y., 3 Bahor, M., 163 Knosala, R., 150 Salomoni, V., 128 Barbacki, A., 18 Kopaé, J., 95 Samper, S., 156 Bochniak, W., 104 Korbel, A., 104 Schrefler, B.A., 128 Bussiba, A., 3 Koutsky, J., 112 Sieniawski, J., 117 Kubiak, K., 117 Siqueira, M.L., 24 Calzavarini, R., 53 Kupiec, M., 3 Sitek, W., 59 Carsi, M., 177 Sokovic, M., 67, 163 Carvalho, G.C., 24 Lombardi, F., 29 Stanley, P., 75 Suchy, J.S., 122 Chiabert, P., 29 Majehrzak, E., 122 Szewieczek, D., 171 Ciura, F., 104 Majorana, C.E., 128 Marciniak, J., 143 Dadvandipour, S., 184 Tabourot, L., 190 Martinkovic, M., 204 Dembovsky, V., 36 Torralba, J.M., 12 Mazanec, K., 90 D’Errico, G.E., 43, 48, 53 Toth, L., 184 Mikolajski, E., 18 Tyrlik-Held, J., 171 Dobrzanski, L.A., 59 Mochnacki, B., 122 DolinSek, S., 67 Dulieu-Smith, J.M., 75 Novy, Z., 112 Vacher, P., 190 Dybiec, H., 104 Nowacki, J., 138 Velasco, F., 12 Vicenzi, B., 53 Eddahbi, M., 177 Orlando, M., 29 Zak, W., 138 Giordano, M., 156 Paszenda, Z., 143, 171 Zitnansky, M., 204 Gronostajski, Z.J., 84 Piela, K., 104 Zoqui, E.J., 198 Guglielmi, E., 48 Pilot, T., 150 Zrnik, J., 204 Elsevier Science S.A. PII $0924-0136(98)00160-5 Journal of Materials Processing Technology Journal of Materials Processing Technology 78 (1998) 213-216 Subject Index of Volume 78 Activating energy Ceramic whiskers steel refining by chemically active plasma, 36 developing processes of property improvement of nickel base Ageing superalloys, 204 structural modifications in rheocast Al—Cu alloys by heat treat- Cermet ment and implications on mechanical properties, 198 on the inter-relationships of some machinability parameters in Aluminium bronze finish machining with cermet TiN (PVD) coated tools, 163 model describing the characteristic values of flow stress and Cermet inserts strain of brass M63 and aluminium bronze BA93, 84 influences of PVD coatings on cermet tool life in continuous and Amorphous structure interrupted turning, 53 corrosion investigations of nanocrystalline iron based alloy, 171 Cermets Anisotropy construction and exploitation of the high dimension cermet slide analysis of a criterion of deep drawing operation capability for bearings in a polyethylene reactor, 138 thin orthotropic sheets, 190 Cermet substrate Annealing of the amorphous alloy a comparative study of PVD coated cermet inserts for milling corrosion investigations of nanocrystalline iron based alloy, 171 applications, 48 Atomic force microscopy Characteristic length fundamental aspects as related to damage initiation of time some observations about strain localisation and shear band dependent processes, 3 formation in concrete samples, 128 Austempering CIM optimization of heat treatment conditions for maximum tough- benefits of geometric dimensioning and tolerancing, 29 ness of high strength silicon steel, 18 Clinker portland Austenitic CrMn steel mechanical properties and wear behaviour of ceramic matrix structure analysis of austenitic CrMn steel alloyed by nitrogen, composites based on clinker portland doped with magnesia, 112 12 Closed ring structure Bainite benefits of geometric dimensioning and tolerancing, 29 optimization of heat treatment conditions for maximum tough- Clustering ness of high strength silicon steel, 18 the application of neural networks in group technology, 150 Biomaterials Composite-like structure the influence of base structure and carbon coating on the corro- the ‘natural’ metal—matrix composite formation by thermo-me- sion resistance of Co—Cr—Mo alloy, 143 chanical treatments, 104 Boundary element method Computer assistance numerical model of macro-segregation during directional crystal- application of a neural network in modelling of hardenability of lization process, 122 constructional steels, 59 Brass Constructional steel model describing the characteristic values of flow stress and application of a neural network in modelling of hardenability of strain of brass M63 and aluminium bronze BA93, 84 constructional steels, 59 Brittle—ductile behaviour Continuous fiber-reinforced metal matrix composites grain size effect on brittle—ductile transition behavior of mild developing processes of property improvement of nickel base steel, 184 superalloys, 204 Brittle temperature range Corrosion resistance contribution to mechanical metallurgy behaviour of steel during corrosion investigations of nanocrystalline iron based alloy, 171 the influence of base structure and carbon coating on the corro- continuous casting, 90 sion resistance of Co—Cr—Mo alloy, 143 CAPE Crack initiation benefits of geometric dimensioning and tolerancing, 29 fundamental aspects as related to damage initiation of time CAQ dependent processes, 3 benefits of geometric dimensioning and tolerancing, 29 Creep Carbon coatings integral method from initial values to obtain the best fit of the the influence of base structure and carbon coating on the corro- Garofalo’s creep equation, 177 sion resistance of Co—Cr—Mo alloy, 143 Critical concentration Ceramic matrix composites steel refining by chemically active plasma, 36 mechanical properties and wear behaviour of ceramic matrix Critical strain | composites based on clinker portland doped with magnesia, model describing the characteristic values of flow stress and 12 strain of brass M63 and aluminium bronze BA93, 84 Elsevier Science S.A. PIT $0924-0136(98)00161-7 214 Subject Index of Volume 78 Crystal growth Hill criterion numerical model of macro-segregation during directional crystal- analysis of a criterion of deep drawing operation capability for lization process, 122 thin orthotropic sheets, 190 Cutting materials influence of cutting material and coating on tool quality and tool Identification parameters life, 95 influence of TiN (PVD) coating on the tool on the identification Cutting temperature parameters in turning, 67 an adaptive system for turning process control based on tool Implants temperature feedback, 43 the influence of base structure and carbon coating on the corrosion resistance of Co—Cr—Mo alloy, 143 Damage Integrated software some observations about strain localisation and shear band benefits of geometric dimensioning and tolerancing, 29 formation in concrete samples, 128 Jominy curve Deep drawing operation application of a neural network in modelling of hardenability of analysis of a criterion of deep drawing operation capability for constructional steels, 59 thin orthotropic sheets, 190 Design for assembly Kinetics benefits of geometric dimensioning and tolerancing, 29 steel refining by chemically active plasma, 36 DFA Kohonen net benefits of geometric dimensioning and tolerancing, 29 the application of neural networks in group technology, 150 Die forging development of the microstructure and fatigue strength of two Ladle phase titanium alloys in the processes of forging and heat steel refining by chemically active plasma, 36 treatment, 117 Liquid impenetrable temperature contribution to mechanical metallurgy behaviour of steel during Fatigue continuous casting, 90 fundamental aspects as related to damage initiation of time Localisation dependent processes, 3 some observations about strain localisation and shear band Fatigue strength formation in concrete samples, 128 development of the microstructure and fatigue strength of two Local parameters phase titanium alloys in the processes of forging and heat grain size effect on brittle—ductile transition behavior of mild treatment, 117 steel, 184 Finish machining on the inter-relationships of some machinability parameters in Machinability finish machining with cermet TiN (PVD) coated tools, 163 influence of TiN (PVD) coating on the tool on the identification Flexible manufacturing cell off-line programming of flexible welding manufacturing cells, 24 parameters in turning, 67 on the inter-relationships of some machinability parameters in Forming limit diagram finish machining with cermet TiN (PVD) coated tools, 163 analysis of a criterion of deep drawing operation capability for Macro-segregation thin orthotropic sheets, 190 numerical model of macro-segregation during directional crystal- Forming simulation lization process, 122 integral method from initial values to obtain the best fit of the Maximum flow stress Garofalo’s creep equation, 177 model describing the characteristic values of flow stress and Garofalo’s equation strain of brass M63 and aluminium bronze BA93, 84 integral method from initial values to obtain the best fit of the Mechanical properties Garofalo’s creep equation, 177 mechanical properties and wear behaviour of ceramic matrix GD&T composites based on clinker portland doped with magnesia, 12 benefits of geometric dimensioning and tolerancing, 29 Grain size optimization of heat treatment conditions for maximum tough- grain size effect on brittle—ductile transition behavior of mild ness of high strength silicon steel, 18 steel, 184 Mechanism analysis Group technology taking into account elastic displacements in 3D tolerancing: the application of neural networks in group technology, 150 Models and application, 156 Griineisen parameter Microstructure on the interpretation and significance of the Griineisen parame- development of the microstructure and fatigue strength of two ter in thermoelastic stress analysis, 75 phase titanium alloys in the processes of forging and heat treatment, 117 Hardenability Mild steel application of a neural network in modelling of hardenability of grain size effect on brittle—ductile transition behavior of mild constructional steels, 59 steel, 184 Hardness Milling application of a neural network in modelling of hardenability of a comparative study of PVD coated cermet inserts for milling constructional steels, 59 applications, 48 High speed cutting Model influence of cutting material and coating on tool quality and tool model describing the characteristic values of flow stress and life, 95 strain of brass M63 and aluminium bronze BA93, 84 Subject Index of Volume 78 Modelling Rheocasting application of a neural network in modelling of hardenability of structural modifications in rheocast Al—Cu alloys by heat treat- constructional steels, 59 ment and implications on mechanical properties, 198 Mushy zone Robotized welding contribution to mechanical metallurgy behaviour of steel during off-line programming of flexible welding manufacturing cells, 24 continuous casting, 90 Self-tuning regulator Nanocrystaline structure an adaptive system for turning process control based on tool corrosion investigations of nanocrystalline iron based alloy, 171 temperature feedback, 43 Natural metal— matrix Semi-solid alloys the ‘natural’ metal—matrix composite formation by thermo-me- structural modifications in rheocast Al—Cu alloys by heat treat- chanical treatments, 104 ment and implications on mechanical properties, 198 Necking Shear band analysis of a criterion of deep drawing operation capability for some observations about strain localisation and shear band thin orthotropic sheets, 190 formation in concrete samples, 128 Neural net Silicon steel application of a neural network in modelling of hardenability of optimization of heat treatment conditions for maximum tough- constructional steels, 59 ness of high strength silicon steel, 18 Non-linear regression Slide bearings integral method from initial values to obtain the best fit of the construction and exploitation of the high dimension cermet slide Garofalo’s creep equation, 177 bearings in a polyethylene reactor, 138 Notch sensitivity Softening grain size effect on brittle—ductile transition behavior of mild some observations about strain localisation and shear band steel, 184 formation in concrete samples, 128 Notch strain intensity factor Solution heat treatment grain size effect on brittle—ductile transition behavior of mild structural modifications in rheocast Al—Cu alloys by heat treat- steel, 184 ment and implications on mechanical properties, 198 Notch stress intensity factor Steady state flow stress grain size effect on brittle—ductile transition behavior of mild model describing the characteristic values of flow stress and steel, 184 strain of brass M63 and aluminium bronze BA93, 84, Numerical simulation of physical processes Steel refining , numerical model of macro-segregation during directional crystal- steel refining by chemically active plasma, 36 lization process, 122 Stress corrosion cracking fundamental aspects as related to damage initiation of time Off-line programming dependent processes, 3 off-line programming of flexible welding manufacturing cells, 24 Structural analysis structure analysis of austenitic CrMn steel alloyed by nitrogen, Particles recombination 112 steel refining by chemically active plasma, 36 taking into account elastic displacements in 3D tolerancing: Pattern recognition Models and application, 156 the application of neural networks in group technology, 150 Superalloys Polyethylene reactor mixer developing processes of property improvement of nickel base construction and exploitation of the high dimension cermet slide superalloys, 204 bearings in a polyethylene reactor, 138 PVD coatings Tempering influences of PVD coatings on cermet tool life in continuous and optimization of heat treatment conditions for maximum tough- interrupted turning, 53 ness of high strength silicon steel, 18 PVD coating techniques Thermoelastic constant a comparative study of PVD coated cermet inserts for milling on the interpretation and significance of the Griineisen parame- applications, 48 ter in thermoelastic stress analysis, 75 Thermoelastic stress analysis Quenching on the interpretation and significance of the Griineisen parame- optimization of heat treatment conditions for maximum tough- ter in thermoelastic stress analysis, 75 ness of high strength silicon steel, 18 Thermo-mechanical treatments Reliability ; the ‘natural’ metal—matrix composite formation by thermo-me- mechanical properties and wear behaviour of ceramic matrix chanical treatments, 104 composites based on clinker portland doped with magnesia, TiN coating 12 influence of cutting material and coating on tool quality and tool Residual stresses life, 95 fundamental aspects as related to damage initiation of time TiN (PVD) coating dependent processes, 3 influence of TiN (PVD) coating on the tool on the identification Response surface parameters in turning, 67 on the inter-relationships of some machinability parameters in on the inter-relationships of some machinability parameters in finish machining with cermet TiN (PVD) coated tools, 163 finish machining with cermet TiN (PVD) coated tools, 163 Retained austenite Tolerancing for function optimization of heat treatment conditions for maximum tough- taking into account elastic displacements in 3D tolerancing: ness of high strength silicon steel, 18 Models and application, 156 216 Subject Index of Volume 78 Tolerancing models temperature feedback, 43 taking into account elastic displacements in 3D tolerancing: Twinning crystallography Models and application, 156 structure analysis of austenitic CrMn steel alloyed by nitrogen, Tool life 112 a comparative study of PVD coated cermet inserts for milling Two phase titanium alloys applications, 48 development of the microstructure and fatigue strength of two influences of PVD coatings on cermet tool life in continuous and phase titanium alloys in the processes of forging and heat interrupted turning, 53 treatment, 117 Tool wear influence of cutting material and coating on tool quality and tool Viscoelasticity life, 95 some observations about strain localisation and shear band Transfer functions formation in concrete samples, 128 influence of TiN (PVD) coating on the tool on the identification Viscous modeling parameters in turning, 67 analysis of a criterion of deep drawing operation capability for Turning thin orthotropic sheets, 190 influences of PVD coatings on cermet tool life in continuous and interrupted turning, 53 Zero ductility temperature Turning process contribution to mechanical metallurgy behaviour of steel during an adaptive system for turning process control based on tool continuous casting, 90