MARINE RADAR/ARPA FCR-2107(-BB)/2807 Series Operator's Guide The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For detailed information see the Operator’s Manual. Table of contents How to select an operating mode...................................................................................................................2 Radar mode indications..................................................................................................................................2 Chart radar mode indications..........................................................................................................................3 ECDIS mode indications.................................................................................................................................4 Radar functions...............................................................................................................................................5 TT functions....................................................................................................................................................6 AIS functions...................................................................................................................................................7 Loading S57 chart from CD-ROM...................................................................................................................8 Display until and approve until dates..............................................................................................................9 Manual chart updates.....................................................................................................................................9 Creating a user chart....................................................................................................................................10 Notes.............................................................................................................................................................11 Route planning..............................................................................................................................................12 Route monitoring...........................................................................................................................................13 Chart alerts...................................................................................................................................................14 Navigation sensors.......................................................................................................................................15 www.furuno.co.jp All brand and product names are trademarks, registered trademarks or service marks of their respective holders. How to select an operating mode Put arrow on the operating mode indication and left-click. The choices are Chart Radar, Radar and ECDIS. (cid:2) Chart Radar Mode : Radar display w/chart overlay (cid:2) Range 0.125 - 24 nm (cid:2) Orientation other than Head-up (cid:2) Radar Mode : Conventional radar display (cid:2) ECDIS Mode : Electronic chart display Radar mode indications TRIAL MANEUVER Box REF point Cursor Position, TTG and R/B to Cursor Picture Box GAIN setting PULSELENGTH Box A/C SEA setting System Status ANTENNA Box A/C RAIN setting (Sector rotates if PRESENTATION Mode TUNING setting Set Box, system is normal.) RANGE Box MODE Box DRIFT Box Heading Head U3p /R N0M.M5 Radar RCECFR Ppoint 350 000 010 DSERTIFT0000.. 00°kTn GSeaain MAN 800 HSSPBDD G (( CP OA LS CN )) 1 070..4836 kk.0nn°° STrpaenesdversal speed CPPUIHCLATSRUETR MRE1A 1 X-BA(cid:3)ND(cid:3) 320 330 3HM4ea0arkdeinrg 020 030 04TR0unaein AMUATNO+13345°°410800.. 634093 NE CS0OO52GG94 ((°PP°5OO5SS49NN..))05 19807472.84'. '7kNEn° CSpoeuersde o ovve err g grroouunndd *1 IEEARUSA 2V T2O OFF 310 Heading Line 050 T00T:G1T1 R3 1I1A.28L.6 3O4°FR NFM WDRGoGuPSteS8: 4 HELSINKI PDoastuitmion RAIN 3 MENU Box Plan Speed 30.0 kn Source of Position* 300 060 MENU Plan 202.9° Symb DISP Box Symb RCoHu LteIM 211975. 9m° Route Data Box 290 070 DISP Off track < 0.9 NM Outside channel 280 Acquistion 080 TDois Wt WPOTP NM WPT Data Box Zone Cursor + TNNieemxxett WP ° 270 No. 1 090 Turn rad NM EBL Drop TUusrenr Crahtea r t N o°t/emsin User Chart, Notes Box 260 Mark 100 L 1O0C AAPL R(U 2T0C0 9+ 1 003:2:080) Date, Time Box No. 2 EBL WBoAxTCH + 15395°°5425..033615''NE Cursor Data 250 No. 2 VRM 110 5.476 NM 91.5° Box No.1 VRM TT A U T O > AISDISP 240 120 Watch TP rVeEdMiCAcNtTo(rG ) 350 m sAiLneL Stern Mark North Mark 11:28 PASTPOSN T 12min PI 1 (cid:3) ON 230 130 TLIGSTT(cid:3) CCPPAA 1A0U.T0ONM a c t 3F0ILmTin Target List Box 000.0 °T AZ1 Lost TGT alarm FILT 0.00 NM 220 140 AZ2 SINGLE xx.xx xx.xx Acquisition zone setting BRILL 1 (cid:3) 12/16 210 150 True Trail 01:00(cid:3) Target Trail setting 200 160 HOLFF EBL1> 280.5° T< 190 180 170 V0R0:M001 >3.682NM< TRMes True motion reset TSXTB EBL2 241.0° T 2D2R9O.8P°T1 4.532NM D°TR O NPM2VRM2 5.221NM AACLMK Range - Info Range + Alert Box No. 2 EBL Drop Mark data No. 2 VRM Alarm Guidance area acknowledge TX/STBY Box No. 1 EBL No. 1 VRM (Current button, HL OFF Box w/TTG data scrollwheel function) BRILL, COLOR Box PI (Index Line) Box *1 -PI orientation To adjust, put arrow on setting and left-click. -PI interval IR: Interference Rejector ES: Echo Stretch EAV: Echo Averaging AUTO RAIN: Auto rain clutter reduction 2 Chart radar mode indications MODE Box Chart database information 3 NM Chart REF point DspBaseSET 000. 0°T Gain 80 HDG 046.0°° Course U/p 0 .R5M Radar CCRP 350 000 010 DRIFT 0. 0kn Sea MAN 0 SSPBD ((CPOALSCN)) 1 07..83 kknn 340 020 Rain MAN 0 COG (POSN) 048.7° CHART RA X-BAND(cid:3) 330 030 Tune AUTO 0 SOG (POSN) 17.4 kn PULSE M1 + 34°40. 649 N 59°54.097'N PICTURE 1 (cid:3) 320 040 135°18. 303 E 024°59.582'E IR 2 TTG 312.3°R ES 2 00:11 1.864 NM WGS84 EAV OFF 310 050 DGPS TRIAL OFF AUTO Route: HELSINKI RAIN 3 Plan Speed 30.0 kn 300 060 MENU Plan 202.9° Route 217.9° Symb CH LIM 195 m 290 070 DISP Off track < 0.9 NM Outside channel To WPT Symb DISP 280 080 Dist WOP NM Time Box + NNeexxtt WP ° 270 090 Turn rad NM Turn rate °/min Chart Status UserChart Notes 260 100 L 1O0C AAPL R(U 2T0C0 9+ 1 003:2:080) Box CSthaaturts + 15395°°5425..033615''NE 250 110 5.476 NM 91.5° CPrhioarritty CDhISaPrt TT AM UA TN O > AISDALISLP Chart DISP CLionaes Otnly 240 120 W11a:2tc8h TP rVeEdiCctTo(rG ) 350msinec Box PASTPOSN T 12min PI 1 (cid:3) ON 230 130 TLIGSTT(cid:3) CCPPAA 1A0U.T0ONM a c t 3F0ILmTin 000.0 °T AZ1 Lost TGT alarm FILT 0.00 NM 220 140 AZ2 SINGLE xx.xx xx.xx BRILL 1 (cid:3) 12/16 210 150 True Trail 01:00(cid:3) 200 160 HL > 280.5° T< 190 180 170 00:00 >3.682NM< TM OFF EBL1 VRM1 Res TX 241.0° T DROP1 DROP2 5.221NM ALM Range - Info Range + STB EBL2 229.8°T 4.532NM °T NMVRM2 ACK Coast Line Only box Chart Priority box 3 ECDIS mode indications HDG : Heading SPD : Longitudinal speed SB : Transversal speed COG : Course over ground (1) Presentation mode (4) Chart only switch SOG : Speed over ground (2) Operating mode (5) Name of display settings Position : Latitude and longitude (3) Display scale Geodetic datum : WGS-84, etc. EPFS : DGPS, GPS, etc. (1) (2) (3) (4) (5) System Status (Sector rotates if system is normal.) Right click to select display [Sidebar] Route Conning Docking Chart Legend Close Mouse function Electronic chart area area. (Current function of left button, scrollwheel, right button) 4 Radar functions Adjusting tuning Radar picture adjustments Measuring range 1. Roll the trackball to put the arrow on the 1. Left-click the PICTURE box. This box 1. Use the trackball to put the arrow in the TUNE level indicator at the top of the has 12 preset picture settings for sea VRM1 or VRM2 box, whichever VRM you screen. state, navigation position, etc. want to use. put arrow here. 2. To adjust, right-click the box, and the display shown below appears. VRM1 Tune MAN VRM2 The guidance box reads "VRM ON." 2. Left-click to show AUTO TUNE to get 2. Push the left button to turn on the VRM. automatic tune. Reject interference. 3. Spin the scrollwheel to put the VRM on Magnify radar echoes. the inner edge of the target. Adjusting sensitivity Supress unstable echoes. Reject noise. 1. Roll the trackball to put the arrow on the Auto sea clutter suppression. 340 350 000 010 020 gain level indicator at the top of the screen. Auto rain clutter suppression. No. 1 320330 030 040 Target VRM 310 050 blip put arrow inside window to adjust gain. Adjust video contrast. 300 060 290 070 Gain 30 280 080 2. Spin the scroll wheel downward to in- 270 090 Select pulselength crease the gain or upward to decrease it. by range. 260 100 No. 2 250 110 VRM Suppressing sea clutter 240 120 Set current sea condition. 230 130 1. Use the trackball to put the arrow in the Set height of radar 220210 150140 SEA AUTO box. antenna above waterline. 200 190 180 170 160 VRM1 > 0 .66NM< Set low level echo. 1.18NM put arrow here. VRM2 To erase a VRM, select the appropriate VRM Sea AUTO 61 box and push the left button until the VRM 3. Select item's setting. disappears from the screen. 2. Push the left button to show SEA MAN. 4. Spin the scrollwheel to select desired 3. Put the arrow on the A/C SEA level setting. indicator. Measuring bearing 5. Push the scrollwheel. 4. While observing the radar image, spin the 1. Use the trackball to put the arrow in the scrollwheel to suppress sea clutter. EBL1 or EBL2 box, whichever EBL you want to use. Suppressing rain clutter EBL1 1. Put the arrow on the level indicator. EBL2 2. While observing the radar image, spin the . The guidance box reads "EBL ON." scrollwheel to suppress rain clutter. 2. Push the left button to turn on the EBL. Put arrow here. 3. Spin the scrollwheel to bisect the target with the EBL. Rain MAN 63 No. 2 330340350 000 010020030 Target EBL 320 040 blip 310 050 300 060 290 070 280 080 270 090 260 100 No. 1 Range markers 250 on EBLs 110 EBL 240 120 230 130 220 140 210 150 200 190 180 170160 >033.2°T< EBL1 299.4°T EBL2 To erase an EBL, select the appropriate EBL box and push the left button until the EBL disappears from the screen. 5 TT functions Activating/deactivating TT TT symbol color, size Setting CPA and TCPA ranges Put the cursor on the TT setting in the infor- 1. Left-click Symb DISP at the right side 1. Use the trackball to select the CPA setting. mation area then push the left mouse button of the screen. to select an option Predictor OFF 2. Click the Targets tab. PASTPOSN T 12 min (AUTO or MAN). CPA 1.0 nm 6 min 2. Spin the scrollwheel to select the CPA AUTO setting desired and push the scrollwheel. MAN Color box 3. Use the trackball to select the TCPA setting. Size box 4. Spin the scrollwheel to select TCPA value desired and push the scrollwheel. Setting vector length Selecting automatic or manual acquisition 1. Spin the scrollwheel to select RelVect. 1. Select the TT setting and push the right T VECT(G) or T VECT(S) (whichever is button. displayed) at the right side of the screen. Manual 100 T VECT(G) 12 min Auto 25 Predictor OFF Auto 50 PASTPOSN T 12 min Auto 75 CPA 1.0 nm 6 min Auto 100 Ref target vector Cancel All SINGLE 06.xx 06.xx 2. Choose a Manual or Auto option as 3. Set the arrow in the Color box. 2. Spin the scrollwheel to display R VECT, applicable. 4. Spin the scrollwheel to select color and T VECT(G) or T VECT(S) as appro- 3. Push the left button. push it to confirm selection. priate. 5. Set the arrow in the Size box. 3. Select the vector time setting. 6. Spin the scrollwheel to select size and 4. Spin the scrollwheel to display time Manually acquiring a target push it to confirm selection. desired and push the scrollwheel. 7. Click the Close button. 1. With the arrow inside the effective display Setting an acquisition zone area, spin the scrollwheel to show Tgt Acquire in the guidance box. An acquisition zone can be used to enable 2. Use the trackball to put the arrow on the automatic target acquisition in a specific area. target you want to acquire. 3. Push the left button to acquire the target. 1. Left-click AZ at the bottom right corner. 2. Set the arrow at the upper left corner of Terminating tracking a target the acquisition zone and left-click. 3. Drag the arrow to the lower right corner 1. Spin the scrollwheel to show Tgt and left-click. Cancel/L=All in the guidance area. To erase an acquisition zone, put arrow 2. Put arrow on target. on applicable AZ indication and push the 3. Push the right button. left button until the guard zone disappears. If two acquisition zones are in use, the No.1 acquisition zone cannot be erased unless Displaying target data the No.2 acquisition zone is erased. 1. Put arrow on TT target. Acquisition zone 2. Push scrollwheel. 330340350000 010020030 320 040 310 050 To delete the target data, put the arrow on 300 060 the target and push the scrollwheel. 290 A B 070 280 080 270 090 260 100 250 110 240 120 230 130 220 140 210 150 200190 180170160 6 AIS functions Turning AIS function on/off Displaying target data Creating a safety message You may display an AIS target's data by Targets which are being tracked by an AIS 1. Display Menu/Info/Chart Menu in the selecting it on the display. transponder can also be displayed on the guidance box and push the left button display. Put the cursor on the AIS setting in Basic data to open the Main menu. Use the trackball to put the arrow on an the information area then push the left 2. Select Safety Message from the menu and AIS target symbol and push the scrollwheel. mouse button to select an option push the scrollwheel. (DISP OFF, DISP FILT, DISP ALL). 3. Put the arrow on the triangle in the menu to show the sub menu. 4. Select Create Message from the menu AUTO MAN and push the scrollwheel. SINGLE xx.xx xx.xx Detailed target data 1. Use the trackball to put the arrow on Activating targets the desired AIS target in the data box at the right side of the screen. Activating specific target 2. Push the left button to show detailed data. 1. Put the arrow on the AIS target and push the scrollwheel. 2. On the target data display, left-click the Address box AIS check mark. Check mark present Message type box means activated target; no check mark Channel box indicates sleeping target. Vector Heading line Activated target Sleeping target Activating all targets 5. Check Enable changes. 1. Put the arrow in the AIS DISP box at the To erase detailed target data, put arrow 6. Put the arrow in the Address box. Spin right side of the screen. in detailed target data and left-click. the scrollwheel to select "Addressed to 2. Right-click to show the AIS DISP menu. MMSI" or "Broadcast to All" as appropriate Filtering AIS targets Sleep All Target and push the scrollwheel. For Addressed Activate All 1. Right-click the AIS setting indication to to MMSI, enter MMSI of ship in the MMSI Auto Disp Msgs show the AIS filter dialog box. input box, in the Vessel window. Received msgs 7 Select message type at Message type box. Transmit msg 8. Enter the text of your message in the box below the Channel box. 3. Select Activate All and left-click. 9. To send the message, put the arrow on Sleeping all activated AIS targets triangle to show the sub menu, select 1 . Use the trackball to select the AIS box at Send Message and push the scrollwheel. the right side of the screen. Max. count 2. Push the right button to open the AIS DISP menu. Max. range Priority Sleep All Target Speed min. Activate All Auto Disp Msgs Length max. Received msgs Transmit msg 2. At the top of the window, check the types 3. Spin the scrollwheel to select Sleep All of AIS targets to show. Target and push the left button or the 3. Select max. count and max. range of AIS scrollwheel. symbols to display. 4. Set filtering method (CPA, TCPA or RANGE) with Priority. 5. Set min. speed and max. length for displayed target. 7 Loading S57 chart from CD-ROM 1. Set CD-ROM to drive, spin the scrollwheel to show 4. Click the Load button to start loading. Menu/Info/Chart Menu in the guidance box and then 1) Before loading starts the message below appears. right-click. 2) Click the Yes button to load chart. SENC conversion is done automatically and the SENC Convert window appears. 2. Select "Load and Update Charts" from the menu and "from CDROM" from the sub menu. [ Load and Update Charts ] Go back from CDROM Manual The system loads publisher notes and product list from the CDROM and the "Load or Update Charts from CDROM dialog box appears. 3. Select the chart to load from the "Load or Update Charts from CDROM" dialog box. 3) After the conversion is completed, the window shown ECDIS below appears. 4) Click the Close button to finish. + N°M SINGLE 8 Display until and approve until dates 1. Open the Chart menu. 7. Click the Accept New 2. Choose Set Chart viewing dates from the menu. 3. Set the arrow in the Display Until field (Approve Until Object button. field), use the scrollwheel to set desired date, and push the scrollwheel. 8. Click the Edit Properties button. 9. Click the Edit Position button. Manual chart update Do the procedures below to manually add objects (points, lines, areas, etc.) to electronic charts, to keep them up to date. Inscribing new symbol 1. Spin the scrollwheel to show Menu/Info/Chart menu in the guidance box. 2. Push the right button. 3. Select Manual Updates and push the scrollwheel. Select Planning and push the scrollwheel. 4. Click the New button. 10. Use the arrow and left button to place and input symbol. Click the Accept button. 5. Select Drawing type 11. Click the Accept and Category. button. 12. Click the "Accept Manual Updates as Permanent" button. 6. Select symbol from symbol list box. 9 Creating a user chart User charts are created and edited in the Planning mode. To display a user chart on ECDIS, set Points, Symbols & Tidals and Areas on the Mariner page in the Symbol Display menu. 1. Put the arrow on User User Chart X 5. Click the Area tab and then check Chart in the information Monitor DISP "Enable changes." To make a new area then click the Plan area, click the Add button in the Area button. (cid:2) field. Define Name for area. Use the arrow Plan DISP to select position for points and then 2. Put the arrow on the (cid:2) push the left button. triangle in the dialog box, choose Create from the menu and then push the scroll wheel. Enter a name for the user chart. Click the OK button to finish. OK 3. Click the Line tab and then check "Enable changes." Click the Add button. Spin the scrollwheel 6. Click the Tidal tab and then check in the Element type box to choose "Enable changes." To mark a tidal on the line type and then push the screen, use the mouse to locate the scrollwheel. To start a new line from arrow and then push the left button. a new position, check "New start Define Name, Type, Orientation, position". Strength and Time for Tidal. The Tidal symbol is displayed on the chart radar and ECDIS displays. Coast line Depth line Route line Predicted: Predicted current flow Actual: Actual current flow kn Navigation line 4. Click the Symbol tab and then check "Enable changes." Click the Add button. For symbol, set style (symbol or label). Use the arrow to select location for symbol or line and then left-click. 7. Click the Point tab and then check "Enable changes." Use arrow and left button to define location of point. Symbol: Alphabet, numeric Label: Entered name Danger Symbol 10

MARINE RADAR/ARPA FCR-2107(-BB)/2807 Series

Similar MARINE RADAR/ARPA FCR-2107(-BB)/2807 Series