MARINE RADAR/ARPA FCR-2107(-BB)/2807 Series

16 Pages·2009·1.39 MB·English

MARINE RADAR/ARPA FCR-2107(-BB)/2807 Series
Operator's Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this equipment. For detailed
information see the Operator’s Manual.
Table of contents
How to select an operating mode...................................................................................................................2
Radar mode indications..................................................................................................................................2
Chart radar mode indications..........................................................................................................................3
ECDIS mode indications.................................................................................................................................4
Radar functions...............................................................................................................................................5
TT functions....................................................................................................................................................6
AIS functions...................................................................................................................................................7
Loading S57 chart from CD-ROM...................................................................................................................8
Display until and approve until dates..............................................................................................................9
Manual chart updates.....................................................................................................................................9
Creating a user chart....................................................................................................................................10
Notes.............................................................................................................................................................11
Route planning..............................................................................................................................................12
Route monitoring...........................................................................................................................................13
Chart alerts...................................................................................................................................................14
Navigation sensors.......................................................................................................................................15
www.furuno.co.jp
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
How to select an operating mode
Put arrow on the operating mode indication and left-click. The choices are Chart Radar, Radar and ECDIS.
(cid:2) Chart Radar Mode : Radar display w/chart overlay
(cid:2) Range 0.125 - 24 nm
(cid:2) Orientation other than Head-up
(cid:2) Radar Mode : Conventional radar display
(cid:2) ECDIS Mode : Electronic chart display
Radar mode indications
TRIAL MANEUVER Box
REF point Cursor Position, TTG and R/B to Cursor
Picture Box GAIN setting
PULSELENGTH Box A/C SEA setting System Status
ANTENNA Box A/C RAIN setting (Sector rotates if
PRESENTATION Mode TUNING setting Set Box, system is normal.)
RANGE Box MODE Box DRIFT Box
Heading
Head U3p /R N0M.M5 Radar RCECFR Ppoint 350 000 010 DSERTIFT0000.. 00°kTn GSeaain MAN 800 HSSPBDD G (( CP OA LS CN )) 1 070..4836 kk.0nn°° STrpaenesdversal speed
CPPUIHCLATSRUETR MRE1A 1 X-BA(cid:3)ND(cid:3) 320 330 3HM4ea0arkdeinrg 020 030 04TR0unaein AMUATNO+13345°°410800.. 634093 NE CS0OO52GG94 ((°PP°5OO5SS49NN..))05 19807472.84'. '7kNEn° CSpoeuersde o ovve err g grroouunndd
*1 IEEARUSA 2V T2O OFF 310 Heading Line 050 T00T:G1T1 R3 1I1A.28L.6 3O4°FR NFM WDRGoGuPSteS8: 4 HELSINKI PDoastuitmion
RAIN 3 MENU Box Plan Speed 30.0 kn Source of Position*
300 060 MENU Plan 202.9°
Symb DISP Box Symb RCoHu LteIM 211975. 9m° Route Data Box
290 070 DISP Off track < 0.9 NM
Outside channel
280 Acquistion 080 TDois Wt WPOTP NM WPT Data Box
Zone Cursor + TNNieemxxett WP °
270 No. 1 090 Turn rad NM
EBL Drop TUusrenr Crahtea r t N o°t/emsin User Chart, Notes Box
260 Mark 100 L 1O0C AAPL R(U 2T0C0 9+ 1 003:2:080) Date, Time Box
No. 2 EBL WBoAxTCH + 15395°°5425..033615''NE Cursor Data
250 No. 2 VRM 110 5.476 NM 91.5° Box
No.1 VRM TT A U T O > AISDISP
240 120 Watch TP rVeEdMiCAcNtTo(rG ) 350 m sAiLneL
Stern Mark North Mark 11:28 PASTPOSN T 12min
PI 1 (cid:3) ON 230 130 TLIGSTT(cid:3) CCPPAA 1A0U.T0ONM a c t 3F0ILmTin Target List Box
000.0 °T AZ1 Lost TGT alarm FILT
0.00 NM 220 140 AZ2 SINGLE xx.xx xx.xx Acquisition zone setting
BRILL 1 (cid:3) 12/16 210 150 True Trail 01:00(cid:3) Target Trail setting
200 160
HOLFF EBL1> 280.5° T< 190 180 170 V0R0:M001 >3.682NM< TRMes True motion reset
TSXTB EBL2 241.0° T 2D2R9O.8P°T1 4.532NM D°TR O NPM2VRM2 5.221NM AACLMK Range - Info Range + Alert Box
No. 2 EBL Drop Mark data No. 2 VRM Alarm
Guidance area
acknowledge
TX/STBY Box No. 1 EBL No. 1 VRM (Current button,
HL OFF Box w/TTG data scrollwheel function)
BRILL, COLOR Box
PI (Index Line) Box *1
-PI orientation To adjust, put arrow
on setting and left-click.
-PI interval
IR: Interference Rejector
ES: Echo Stretch
EAV: Echo Averaging
AUTO RAIN: Auto rain clutter reduction
2
Chart radar mode indications
MODE Box Chart database information
3 NM Chart REF point DspBaseSET 000. 0°T Gain 80 HDG 046.0°°
Course U/p 0 .R5M Radar CCRP 350 000 010 DRIFT 0. 0kn Sea MAN 0 SSPBD ((CPOALSCN)) 1 07..83 kknn
340 020 Rain MAN 0 COG (POSN) 048.7°
CHART RA X-BAND(cid:3) 330 030 Tune AUTO 0 SOG (POSN) 17.4 kn
PULSE M1 + 34°40. 649 N 59°54.097'N
PICTURE 1 (cid:3) 320 040 135°18. 303 E 024°59.582'E
IR 2 TTG 312.3°R
ES 2 00:11 1.864 NM WGS84
EAV OFF 310 050 DGPS
TRIAL OFF
AUTO Route: HELSINKI
RAIN 3 Plan Speed 30.0 kn
300 060 MENU Plan 202.9°
Route 217.9°
Symb CH LIM 195 m
290 070 DISP Off track < 0.9 NM
Outside channel
To WPT Symb DISP
280 080 Dist WOP NM
Time Box
+ NNeexxtt WP °
270 090 Turn rad NM
Turn rate °/min Chart Status
UserChart Notes
260 100 L 1O0C AAPL R(U 2T0C0 9+ 1 003:2:080) Box
CSthaaturts + 15395°°5425..033615''NE
250 110 5.476 NM 91.5°
CPrhioarritty CDhISaPrt TT AM UA TN O > AISDALISLP Chart DISP
CLionaes Otnly 240 120 W11a:2tc8h TP rVeEdiCctTo(rG ) 350msinec Box
PASTPOSN T 12min
PI 1 (cid:3) ON 230 130 TLIGSTT(cid:3) CCPPAA 1A0U.T0ONM a c t 3F0ILmTin
000.0 °T AZ1 Lost TGT alarm FILT
0.00 NM 220 140 AZ2 SINGLE xx.xx xx.xx
BRILL 1 (cid:3) 12/16 210 150 True Trail 01:00(cid:3)
200 160
HL > 280.5° T< 190 180 170 00:00 >3.682NM< TM
OFF EBL1 VRM1 Res
TX 241.0° T DROP1 DROP2 5.221NM ALM Range - Info Range +
STB EBL2 229.8°T 4.532NM °T NMVRM2 ACK
Coast Line Only box
Chart Priority box
3
ECDIS mode indications
<Data from position-fixing sensor>
HDG : Heading
SPD : Longitudinal speed
SB : Transversal speed
COG : Course over ground
(1) Presentation mode (4) Chart only switch SOG : Speed over ground
(2) Operating mode (5) Name of display settings Position : Latitude and longitude
(3) Display scale Geodetic datum : WGS-84, etc.
EPFS : DGPS, GPS, etc.
(1) (2) (3) (4) (5)
System Status
(Sector rotates if
system is normal.)
Right click to
select display
[Sidebar]
Route
Conning
Docking
Chart Legend
Close
Mouse function
Electronic chart area
area.
(Current function of left button,
scrollwheel, right button)
4
Radar functions
Adjusting tuning Radar picture adjustments Measuring range
1. Roll the trackball to put the arrow on the 1. Left-click the PICTURE box. This box 1. Use the trackball to put the arrow in the
TUNE level indicator at the top of the has 12 preset picture settings for sea VRM1 or VRM2 box, whichever VRM you
screen. state, navigation position, etc. want to use.
put arrow here. 2. To adjust, right-click the box, and the
display shown below appears. VRM1
Tune MAN VRM2
The guidance box reads "VRM ON."
2. Left-click to show AUTO TUNE to get 2. Push the left button to turn on the VRM.
automatic tune. Reject interference. 3. Spin the scrollwheel to put the VRM on
Magnify radar echoes. the inner edge of the target.
Adjusting sensitivity Supress unstable echoes.
Reject noise.
1. Roll the trackball to put the arrow on the Auto sea clutter suppression. 340 350 000 010 020
gain level indicator at the top of the screen. Auto rain clutter suppression. No. 1 320330 030 040 Target
VRM 310 050 blip
put arrow inside
window to adjust gain. Adjust video contrast. 300 060
290 070
Gain 30 280 080
2. Spin the scroll wheel downward to in- 270 090
Select pulselength
crease the gain or upward to decrease it. by range. 260 100 No. 2
250 110
VRM
Suppressing sea clutter 240 120
Set current sea condition. 230 130
1. Use the trackball to put the arrow in the Set height of radar 220210 150140
SEA AUTO box. antenna above waterline. 200 190 180 170 160 VRM1 > 0 .66NM<
Set low level echo. 1.18NM
put arrow here. VRM2
To erase a VRM, select the appropriate VRM
Sea AUTO 61 box and push the left button until the VRM
3. Select item's setting. disappears from the screen.
2. Push the left button to show SEA MAN.
4. Spin the scrollwheel to select desired
3. Put the arrow on the A/C SEA level
setting.
indicator. Measuring bearing
5. Push the scrollwheel.
4. While observing the radar image, spin the
1. Use the trackball to put the arrow in the
scrollwheel to suppress sea clutter.
EBL1 or EBL2 box, whichever EBL you
want to use.
Suppressing rain clutter
EBL1
1. Put the arrow on the level indicator. EBL2
2. While observing the radar image, spin the .
The guidance box reads "EBL ON."
scrollwheel to suppress rain clutter.
2. Push the left button to turn on the EBL.
Put arrow here. 3. Spin the scrollwheel to bisect the target
with the EBL.
Rain MAN 63
No. 2 330340350 000 010020030 Target
EBL 320 040 blip
310 050
300 060
290 070
280 080
270 090
260 100 No. 1
Range markers
250 on EBLs 110 EBL
240 120
230 130
220 140
210 150
200 190 180 170160
>033.2°T<
EBL1
299.4°T
EBL2
To erase an EBL, select the appropriate EBL
box and push the left button until the EBL
disappears from the screen.
5
TT functions
Activating/deactivating TT TT symbol color, size Setting CPA and TCPA ranges
Put the cursor on the TT setting in the infor-
1. Left-click Symb DISP at the right side 1. Use the trackball to select the CPA setting.
mation area then push the left mouse button
of the screen.
to select an option Predictor OFF
2. Click the Targets tab. PASTPOSN T 12 min
(AUTO or MAN).
CPA 1.0 nm 6 min
2. Spin the scrollwheel to select the CPA
AUTO setting desired and push the scrollwheel.
MAN
Color box 3. Use the trackball to select the TCPA
setting.
Size box 4. Spin the scrollwheel to select TCPA value
desired and push the scrollwheel.
Setting vector length
Selecting automatic or manual acquisition
1. Spin the scrollwheel to select RelVect.
1. Select the TT setting and push the right T VECT(G) or T VECT(S) (whichever is
button. displayed) at the right side of the screen.
Manual 100 T VECT(G) 12 min
Auto 25 Predictor OFF
Auto 50 PASTPOSN T 12 min
Auto 75 CPA 1.0 nm 6 min
Auto 100
Ref target vector
Cancel All SINGLE 06.xx 06.xx
2. Choose a Manual or Auto option as 3. Set the arrow in the Color box. 2. Spin the scrollwheel to display R VECT,
applicable. 4. Spin the scrollwheel to select color and T VECT(G) or T VECT(S) as appro-
3. Push the left button. push it to confirm selection. priate.
5. Set the arrow in the Size box. 3. Select the vector time setting.
6. Spin the scrollwheel to select size and 4. Spin the scrollwheel to display time
Manually acquiring a target
push it to confirm selection. desired and push the scrollwheel.
7. Click the Close button.
1. With the arrow inside the effective display
Setting an acquisition zone
area, spin the scrollwheel to show Tgt
Acquire in the guidance box. An acquisition zone can be used to enable
2. Use the trackball to put the arrow on the automatic target acquisition in a specific area.
target you want to acquire.
3. Push the left button to acquire the target. 1. Left-click AZ at the bottom right corner.
2. Set the arrow at the upper left corner of
Terminating tracking a target the acquisition zone and left-click.
3. Drag the arrow to the lower right corner
1. Spin the scrollwheel to show Tgt and left-click.
Cancel/L=All in the guidance area. To erase an acquisition zone, put arrow
2. Put arrow on target. on applicable AZ indication and push the
3. Push the right button. left button until the guard zone disappears.
If two acquisition zones are in use, the No.1
acquisition zone cannot be erased unless
Displaying target data
the No.2 acquisition zone is erased.
1. Put arrow on TT target. Acquisition zone
2. Push scrollwheel. 330340350000 010020030
320 040
310 050
To delete the target data, put the arrow on
300 060
the target and push the scrollwheel. 290 A B 070
280 080
270 090
260 100
250 110
240 120
230 130
220 140
210 150
200190 180170160
6
AIS functions
Turning AIS function on/off Displaying target data Creating a safety message
You may display an AIS target's data by
Targets which are being tracked by an AIS 1. Display Menu/Info/Chart Menu in the
selecting it on the display.
transponder can also be displayed on the guidance box and push the left button
display. Put the cursor on the AIS setting in Basic data to open the Main menu.
Use the trackball to put the arrow on an
the information area then push the left 2. Select Safety Message from the menu and
AIS target symbol and push the scrollwheel.
mouse button to select an option push the scrollwheel.
(DISP OFF, DISP FILT, DISP ALL). 3. Put the arrow on the triangle in the
menu to show the sub menu.
4. Select Create Message from the menu
AUTO
MAN and push the scrollwheel.
SINGLE xx.xx xx.xx Detailed target data
1. Use the trackball to put the arrow on
Activating targets the desired AIS target in the data box at
the right side of the screen.
Activating specific target
2. Push the left button to show detailed data.
1. Put the arrow on the AIS target and push
the scrollwheel.
2. On the target data display, left-click the
Address box
AIS check mark. Check mark present Message type box
means activated target; no check mark Channel box
indicates sleeping target.
Vector
Heading
line
Activated target Sleeping target
Activating all targets
5. Check Enable changes.
1. Put the arrow in the AIS DISP box at the To erase detailed target data, put arrow
6. Put the arrow in the Address box. Spin
right side of the screen. in detailed target data and left-click.
the scrollwheel to select "Addressed to
2. Right-click to show the AIS DISP menu.
MMSI" or "Broadcast to All" as appropriate
Filtering AIS targets
Sleep All Target and push the scrollwheel. For Addressed
Activate All 1. Right-click the AIS setting indication to to MMSI, enter MMSI of ship in the MMSI
Auto Disp Msgs show the AIS filter dialog box. input box, in the Vessel window.
Received msgs
7 Select message type at Message type box.
Transmit msg
8. Enter the text of your message in the box
below the Channel box.
3. Select Activate All and left-click.
9. To send the message, put the arrow on
Sleeping all activated AIS targets triangle to show the sub menu, select
1 . Use the trackball to select the AIS box at Send Message and push the scrollwheel.
the right side of the screen.
Max. count
2. Push the right button to open the
AIS DISP menu. Max. range
Priority
Sleep All Target
Speed min.
Activate All
Auto Disp Msgs Length max.
Received msgs
Transmit msg
2. At the top of the window, check the types
3. Spin the scrollwheel to select Sleep All of AIS targets to show.
Target and push the left button or the 3. Select max. count and max. range of AIS
scrollwheel. symbols to display.
4. Set filtering method (CPA, TCPA or
RANGE) with Priority.
5. Set min. speed and max. length for
displayed target.
7
Loading S57 chart from CD-ROM
1. Set CD-ROM to drive, spin the scrollwheel to show 4. Click the Load button to start loading.
Menu/Info/Chart Menu in the guidance box and then
1) Before loading starts the message below appears.
right-click.
2) Click the Yes button to load chart. SENC conversion
is done automatically and the SENC Convert window
appears.
2. Select "Load and Update Charts" from the menu and
"from CDROM" from the sub menu.
[ Load and Update Charts ]
Go back
from CDROM
Manual
The system loads publisher notes and product list from
the CDROM and the "Load or Update Charts from
CDROM dialog box appears.
3. Select the chart to load from the "Load or Update Charts
from CDROM" dialog box.
3) After the conversion is completed, the window shown
ECDIS
below appears.
4) Click the Close button to finish.
+ N°M
SINGLE
8
Display until and approve until dates
1. Open the Chart menu.
7. Click the Accept New
2. Choose Set Chart viewing dates from the menu.
3. Set the arrow in the Display Until field (Approve Until Object button.
field), use the scrollwheel to set desired date, and
push the scrollwheel.
8. Click the Edit
Properties button.
9. Click the Edit Position
button.
Manual chart update
Do the procedures below to manually add objects (points,
lines, areas, etc.) to electronic charts, to keep them up to
date.
Inscribing new symbol
1. Spin the scrollwheel to show Menu/Info/Chart menu in the
guidance box.
2. Push the right button.
3. Select Manual Updates and push the scrollwheel. Select
Planning and push the scrollwheel.
4. Click the New button.
10. Use the arrow and left
button to place and
input symbol. Click the
Accept button.
5. Select Drawing type
11. Click the Accept
and Category.
button.
12. Click the "Accept
Manual Updates as
Permanent" button.
6. Select symbol from
symbol list box.
9
Creating a user chart
User charts are created and edited in the Planning mode. To display a user chart on ECDIS, set Points, Symbols & Tidals
and Areas on the Mariner page in the Symbol Display menu.
1. Put the arrow on User User Chart X 5. Click the Area tab and then check
Chart in the information Monitor DISP "Enable changes." To make a new
area then click the Plan area, click the Add button in the Area
button. (cid:2) field.
Define Name for area. Use the arrow
Plan DISP
to select position for points and then
2. Put the arrow on the (cid:2) push the left button.
triangle in the dialog box,
choose Create from the
menu and then push the
scroll wheel. Enter a name
for the user chart. Click the
OK button to finish. OK
3. Click the Line tab and then check
"Enable changes." Click the Add
button. Spin the scrollwheel
6. Click the Tidal tab and then check
in the Element type box to choose
"Enable changes." To mark a tidal on the
line type and then push the
screen, use the mouse to locate the
scrollwheel. To start a new line from
arrow and then push the left button.
a new position, check "New start
Define Name, Type, Orientation,
position".
Strength and Time for Tidal. The Tidal
symbol is displayed on the chart
<Line type> radar and ECDIS displays.
Coast line
Depth line <Types>
Route line Predicted: Predicted current flow
Actual: Actual current flow kn
Navigation line
4. Click the Symbol tab and then check
"Enable changes." Click the Add
button. For symbol, set style (symbol or
label). Use the arrow to select location
for symbol or line and then left-click.
7. Click the Point tab and then check
"Enable changes." Use arrow and left
<Symbol style>
button to define location of point.
Symbol: Alphabet, numeric
Label: Entered name
Danger Symbol
10