Structural Cross Sections. Analysis and Design

598 Pages·2016·54.94 MB·English

by  Naveed Anwar and Fawad Ahmed Najam (Auth.)

STRUCTURAL
CROSS-SECTIONS
STRUCTURAL
CROSS-SECTIONS
Analysis and Design
NAVEED ANWAR
Asian Institute of Technology
Thailand
FAWAD AHMED NAJAM
Asian Institute of Technology
Thailand
AMSTERDAM(cid:129)BOSTON(cid:129)HEIDELBERG(cid:129)LONDON
NEWYORK(cid:129)OXFORD(cid:129)PARIS(cid:129)SANDIEGO
SANFRANCISCO(cid:129)SINGAPORE(cid:129)SYDNEY(cid:129)TOKYO
Butterworth-HeinemannisanimprintofElsevier
Butterworth-HeinemannisanimprintofElsevier
TheBoulevard,LangfordLane,Kidlington,OxfordOX51GB,UnitedKingdom
50HampshireStreet,5thFloor,Cambridge,MA02139,UnitedStates
Copyrightr2017ElsevierInc.Allrightsreserved.
Nopartofthispublicationmaybereproducedortransmittedinanyformorbyanymeans,electronic
ormechanical,includingphotocopying,recording,oranyinformationstorageandretrievalsystem,without
permissioninwritingfromthepublisher.Detailsonhowtoseekpermission,furtherinformationaboutthe
Publisher’spermissionspoliciesandourarrangementswithorganizationssuchastheCopyrightClearance
CenterandtheCopyrightLicensingAgency,canbefoundatourwebsite:www.elsevier.com/permissions.
ThisbookandtheindividualcontributionscontainedinitareprotectedundercopyrightbythePublisher
(otherthanasmaybenotedherein).
Notices
Knowledgeandbestpracticeinthisfieldareconstantlychanging.Asnewresearchandexperiencebroaden
ourunderstanding,changesinresearchmethods,professionalpractices,ormedicaltreatmentmaybecome
necessary.
Practitionersandresearchersmustalwaysrelyontheirownexperienceandknowledgeinevaluatingand
usinganyinformation,methods,compounds,orexperimentsdescribedherein.Inusingsuchinformation
ormethodstheyshouldbemindfuloftheirownsafetyandthesafetyofothers,includingpartiesforwhom
theyhaveaprofessionalresponsibility.
Tothefullestextentofthelaw,neitherthePublishernortheauthors,contributors,oreditors,assume
anyliabilityforanyinjuryand/ordamagetopersonsorpropertyasamatterofproductsliability,negligence
orotherwise,orfromanyuseoroperationofanymethods,products,instructions,orideascontainedin
thematerialherein.
BritishLibraryCataloguing-in-PublicationData
AcataloguerecordforthisbookisavailablefromtheBritishLibrary
LibraryofCongressCataloging-in-PublicationData
AcatalogrecordforthisbookisavailablefromtheLibraryofCongress
ISBN:978-0-12-804443-8
ForInformationonallButterworth-Heinemannpublications
visitourwebsiteathttps://www.elsevier.com
Publisher:JoeHayton
AcquisitionEditor:KenMcCombs
EditorialProjectManager:PeterJardim
ProductionProjectManager:MohanaNatarajan
Designer:VictoriaPearson
TypesetbyMPSLimited,Chennai,India
DEDICATION
This book is dedicated to our desire for understanding the physical world
around us.
ABOUT THE AUTHORS
Naveed Anwar is Executive Director/CEO of AIT Solutions (AITS),
Director of Asian Center for Engineering Computations and Software
(ACECOMS), and an affiliated member of the Structural Engineering
Faculty at the Asian Institute of Technology (AIT), Thailand. Dr. Anwar
received his BSc degree in Civil Engineering from the University of
Engineering & Technology, Lahore, Pakistan, and both masters and PhD
degrees in Structural Engineering from Asian Institute of Technology,
Bangkok, Thailand. He teaches academic courses and supervises research
for masters and PhD students at AIT related to reinforced concrete
mechanics, design of tall buildings, and bridge structures.
Dr. Anwar has an experience of over 35 years while completing hun-
dreds of projects related to structural modeling, analysis and design of
buildings and bridges, construction project management, structural health
assessment, and other related areas. His main area of expertise is the per-
formance-based design and evaluation of new and existing structures,
especially high-rise buildings. He has also conducted hundreds of profes-
sional trainings, workshops, and seminars, attended by thousands of pro-
fessionals in more than 15 countries. He is also proficient in the
development of computer software for structural engineering applications,
including general structural analysis, earthquake resistant design, structural
detailing, and is the author of several software and computing tools.
Fawad A. Najam received his BS degree in Civil Engineering from the
University of Engineering and Technology (UET, Taxila), Pakistan, and
MS degree in Structural Engineering from the National University of
Sciences and Technology (NUST), Islamabad, Pakistan. Currently, he is
associated with Department of Structural Engineering at the Asian
Institute of Technology (AIT) and AIT Solutions (AITS) in Thailand,
and has received PhD in Structural Engineering. He is also a member of
the Structural Engineering Faculty at the National University of Sciences
and Technology (NUST), Islamabad, Pakistan.
His areas of interest include structural dynamics, seismic performance
evaluation of high-rise buildings, and structural engineering software
development. His research encompasses various practical issues related to
seismic design and analysis procedures used in current structural
xi
xii AbouttheAuthors
engineering practice. He has also participated actively in various research
and academic projects, while working at various appointments including
faculty positions, civil/structural engineering consultant, and research
associate at various organizations in Pakistan and Thailand.
PREFACE
The cross-sections and their properties are a basic component in almost
all aspects of analysis and design of structures. In fact, the primary objec-
tive of an efficient design process is to proportion the cross-sections of
structural elements to resist the applied load effects and actions. Also, the
preliminary dimensions and properties of cross-sections are required to
start the modeling and analysis process for the structural system, to pre-
pare initial cost estimates and even to refine the basic space planning and
utilization schemes. It is the key role cross-sections play in overall struc-
tural behavior, analysis, and design, which motivated authors to write a
book focusing on their basic understanding and behavior, with an empha-
sis on computer applications.
The main objective of this book is to provide a consolidated and con-
sistent information, insight and explanation of various aspects of cross-
section behavior and design, irrespective of, but with due consideration
to different materials. It discusses theoretical formulations, practical analy-
sis, design computations, and computer applications for determination of
cross-sectional response. The main areas of focus and distribution of chap-
ters is as follows:
1. The overall view of cross-section behavior with respect to various
aspect of structural mechanics and computing is covered in the
Chapter 1, Structures and Structural Design. It discusses the basic con-
cepts and procedures for structural analysis and design, including a dis-
cussion of the development of structural design philosophy and
progression of design approaches, terminating with a discussion of
performance-based design. The chapter also discusses the basic con-
cepts of stiffness, nonlinearity of relationships between deformations
and corresponding actions, etc., and lays the foundation for the
remaining chapters in the book.
2. The meaning and computation of cross-section properties, from A(cid:1)Z
(areatoplasticsectionmodulus)arecoveredinChapter2,Understanding
Cross-Sections. It provides the basis for the study and understanding
of the structural cross-sections. The anatomy and hierarchy of the cross-
section shapes, types, and the materials they are made up, is extensively
covered. Several methods for defining the cross-sections, including
parametric and general procedures are discussed. The main focus is on
computing the geometric properties of various section shapes, using
xiii
xiv Preface
closed-form solutions as well as more general polygon and mesh-based
procedures are discussed. In addition to the formulae to compute the
properties, a discussion on the significance of various properties helps to
improve the cross-section behavior computer-based methods and several
solved examples are included followed by problem for readers to try and
explore.Thechapter makesuseofextensiveillustrationsanddiagrams.
3. The meaning and calculation of stress-resultants using a unified and
integratedapproacharecoveredinChapter3,Axial-FlexuralResponse
of Cross-Sections. This treatment of cross-sectional behavior is unique
and not covered in most of the books on this subject. A set of general
equation as well as computation procedure is presented to determine
the capacity interaction surface of generalized cross-section made up of
anynumberandconfigurationofmaterials.Severalsolvedexamplesare
presented, together with flow charts to demonstrate the code-based
proceduresfordesignofbeam-columnsections.
4. The shear and torsion stress distribution and design calculations for rein-
forced concrete sections are covered in Chapter 4, Response and Design
for Shear and Torsion. Several detailed flow charts are included to dem-
onstrate the procedures used in ACI, BS, and Euro codes for design of
cross-sectionsubjectedtoshearandtorsion,followedbysolvedexamples.
5. Thedesignofcolumncross-sections,slendernesseffects,buckling,andrel-
evant behavioral aspects of columns are covered in Chapter 5, Response
andDesignofColumnCross-Sections.Italsodiscussestheroleofbound-
ary conditions on slenderness and provides guidelines about when and
howsecond-ordereffectscanbeconsideredindesignprocessforcolumns.
ItprovidesanoverviewofcolumndesignapproachesasprescribedinACI
and BS codes and various practical design considerations and guidelines
forproportioninganddetailingofRCcolumnsarealsoincluded.
6. The ductility considerations, confinement of reinforced concrete
sections, and related issues for cross-section analysis and design
are covered in Chapter 6, Ductility of Cross-Sections. The definition
and development of action-deformation curves especially
moment(cid:1)curvature ðM2φÞ curve is discussed extensively. The pro-
cedure to generate the moment(cid:1)curvature curve, using the general
formulation of axial(cid:1)flexural response developed in Chapter 3, is
demonstrated. Various factors such as confinement, rebar distribution
and axial load effect on the ductility are also shown through examples.
7. Thereviewofvarioustechniquesandtechnologiestoretrofitthecross-
sections are covered in Chapter 7, Retrofitting of Cross-Sections. The
Preface xv
methods to calculate the capacity of retrofitted cross-sections using the
formulations presented in Chapter 2, Chapter 3, and Chapter 4, are
presented. Evaluation of sections subjected to high temperatures is also
discussedindetail.
8. The discussion about various latest software and applications for
computer-aided analysis of cross-sections are covered in Chapter 8,
Software Development and Application for the Analysis of Cross-
Sections. A brief introduction of CSiCOL (a comprehensive software
package for the analysis and design of reinforced and composite col-
umn sections) is also included. This chapter also introduces various
new ideas and scopes related to development of mobile applications
for structural analysis on both Android and iOS platforms. Various
applications of cloud computing and component-based software
engineering in analysis and design of structures, are also introduced.
Over last two decades, the senior author has had the opportunity to
work with and contribute entirelyor partially to the development of soft-
ware tools dealing with the behavior and design of cross-sections and can
be used in conjunction with the material presented in this book for prac-
tical applications. Some of these include:
1. Structural Design Library, SDL-1, by Technosoft Computer
Applications, Lahore, Pakistan, (1993).
2. Structural Designers Library, SDL-2, by Asian Center for Engineering
Computations and Software ACECOMS, Asian Institute of
Technology, Thailand, (1996).
3. General Engineering Assistant and Reference, GEAR, by Asian
Center for Engineering Computations and Software, ACECOMS,
Asian Institute of Technology, Thailand, (1997).
4. RISA Section, by RISATechnologies, California, USA (2000).
5. CSI Section Builder, by Computers and Structures, Inc. (CSi),
Berkeley, California, USA, (2001).
6. CSiCOL, by Computers and Structures, Inc. (CSi), California, USA,
(2008).
The information presented in this book is derived and based on the
development of these software, and the senior author gratefully acknowl-
edges the contribution of the organizations who released these software
for their support, encouragement, and permission to use some of the
material. The readers of this book can be the senior undergraduate stu-
dents in civil engineering, graduate students in structural engineering,
and practicing structural engineers, interested in developing the basic
xvi Preface
understanding of the behavior of cross-sections. It can also be a reference
for those desiring to develop or understand the software tools for cross-
section analysis. This book is not intended to cover the conventional lit-
erature review, or duplication of information readilyavailable in textbooks
or reference books. It will also not cover the derivation and proofs of
equations and formulae, instead, adequate references have been included
for readers interested in these aspects.
The readers of this book are encouraged to visit the web site www.
structuralengineering.info to get additional and updated information
related to the material presented in this book. The readers are also wel-
come to contact the authors directly for their comments and queries
regarding the behavior of cross-sections, their modeling, analysis, and
design.
Naveed Anwar
[email protected]
[email protected]
Fawad A. Najam
[email protected]
[email protected]
November 2016