Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 1991: Vol 205 Index

53 Pages·1991·18 MB·English

Proceedings of the Institution of Mechanical Engineers
Volume 205, 1991
Index compiled by Geoffrey C Jones
The 1991 published Proceedings of the Institution of Mechanical Engineers include
nine journals (thirty-two issues), fourteen conference volumes and eight seminar
volumes. Each entry in the index comprises a code which refers to the relevant
journal or volume followed by the page number. The titles with their respective codes
are as follows:
A Journal of Power and Energy (issues Al to A4)
B Journal of Engineering Manufacture (issues B1 to B4)
ts Journal of Mechanical Engineering Science (issues C1 to C6)
D Journal of Automobile Engineering (issues D1 to D4)
E Journal of Process Mechanical Engineering (issues El and E2)
F Journal of Rail and Rapid Transit (issues Fl and F2)
G Journal of Aerospace Engineering (issues G1 and G2)
H Journal of Engineering in Medicine (issues H1 to H4)
I Journal of Systems and Control Engineering (issues I1 to I4)
Bulk 2000: Bulk Materials Handling Towards the Year 2000
Effective CADCAM ’91
Eurotech Direct: Computers in Engineering Industry
Computers in Engine Technology
Centrifugal Pump Low-flow Protection
Experimental Methods in Engine Research and Development '91
European Engineering Research and Technology Transfer Congress
Computational Fluid Dynamics—Tool or Toy?
Flow Induced Vibrations
Internal Combustion Engine Research
Eurotech Direct: Materials and Processes
Eurotech Direct: Machine Systems
Process Pumps—the State of the Art
Management of In-Service Inspection of Pressure Systems
Engineering for Profit from Waste
Engineering Solutions to the Management of Solid Radioactive Waste
Safety Developments in the Offshore Oil and Gas Industry
Solids Pumping
Eurotech Direct: Thermofluids Engineering
Turbomachinery: Latest Developments in a Changing Scene
Opportunities for Consumer Waste Recycling
Wave Energy
Author Index
Aartsen, A Mechanical seals for liquids containing Allen, CR
solids SPU23 State-of-the-art brushless drive techniques for robot
Abbass, MK Comparison of methods for the determination of the applications MS93
SOF of diesel particulates and development of a rapid TGA The development of advanced sensory systems for the control of
method for the estimation of the unburnt fuel and lubricating robotic systems and quality inspection MS49
oil fractions M109 Allen,G Flow induced vibrations in the tube banks of fossil fired
Abd Al-Masseeh, W A_ The rotating matrix swirling gas burner: boilers FIV487
performance and computational design TFE43 Allen, JC Development of science parks in the United
Abdel-Gayed,R G_ A fibre optic laser Doppler anemometer, data Kingdom ER145
acquisition system, and analysis procedure for evaluating the Allen, P HG_ Electro-hydrodynamic enhancement of two-phase
pre- ignition flow field of a motored spark ignition heat transfer TFE165
engine EM163 Alliston-Greiner, AF Testing extreme pressure and anti-wear
Abdelhaleem, S M Comparison of methods for the determination performance of gear lubricants G89
of the SOF of diesel particulates and development of a rapid Allonby, N The design of low noise cams and cam pairs for a
TGA method for the estimation of the unburnt fuel and wide range of operating conditions MS203
lubricating oil fractions M109 Allwood, RJ Vibration analysis of gas turbines by an intelligent
Abdul-Ghani, AM _ Controlling two-phase flow using a fluidic knowledge-based system G115
vortex amplifier E45 Almas, T
Adcock, P L_ Solid polymer fuel cells for electric vehicle Spark ignition engine cyclic variability measurement using
propulsion ICE67 optical probes EM7
Adewoye, AA _ A laminar flamelet model of turbulent combustion Study of ignition in spark ignition engines with a specially
in spark ignition engines ICE103 designed Schlieren system and digital image
Adjerian, N The concept of computer.integrated design CC141 processing EM29
Agarwal,BD_ Analysis and performance of fibre composites Al-Qurainy, I A Quantitative mechanical assessment of the
(book review) G139 extraocular muscles H101
Agnew, B_ A note on the design of air springs D207 Al-Rubaie, MAR
Ahmed, N A Data aquisition system of ignition delay measurements in diesel
Flow separation in a high-speed impeller passage ICE] engines EM87
Laser anemometry in turbomachines Gl Fundamental studies related to combustion in diesel
Aitken, MB_ Elastohydrodynamic lubrication of big-end bearings engines ICE151
Part 1: theory C99 Al-Shareef, K JH On the applicability of modal and response
Part 2: ratification C107 representations in the dynamic analysis of machine tool
Akahane,H Valve gear movement simulation CET259 spindle bearing systems B139
Akay, M_ Significance of flow-aberrations and weld-lines in glass- Al-Shukri, S Assessment of pressure drop flowrate relationship of
fibre reinforced thermoplastic injection mouldings MP113 axillobifemoral bypass grafts H243
Aksu, S A comparison of two-dimensional and three-dimensional Alty, JL Multi-media interfaces and process control CEIS9
hydroelasticity theories including the effect of slamming C3 Amato, U_ The joint use of multi-dimensional modelling and field
Al-Abbas,R K The thermal performance of the bonded carbide experiments in order to design diesel combustion
tipped tool as compared with commercially available systems CET57
tools B35 Amyot,JR Hovercraft technology, economics and applications
Alamdari, F (book review) G67
Microclimate performance of an open atrium office building: a Andersen,EB The development of a double-layered cylinder
case liner MP203
study in thermo-fluid modelling FD81 Anderson, A
Thermo-fluid analysis in the built environment: expectations and An undergraduate introductory course on computational fluid
limitations FDS dynamics A3
Al-Baldawi,R AH _ Performance optimization of an Modelling the interaction of compressor surging with ductwork
electrohydraulic position control system with load-dependent fluid compressibility and inertia FIV293
supply pressure 1175 Anderson, AJ A transputer based adaptive control system 1275
Aldis,C A Local void fraction measurement in flow channels of Anderson, DD _ Stress wave effects in a finite element analysis of
irregular shape TFE147 an impulsively loaded articular joint H27
Alexander, J Y Advances in automatic machining of complex Anderson, JD A Knowledge-based engineering systems in
2.5D components CC59 practice CC121
Alford, NMcN _ Properties and applications of bulk and thick film Anderson, RT Commercial low level waste disposal sites in the
high temperature superconductors MP33 United States: the past and the future RW1
Alfredson,R J Active control of flow-excited acoustic resonance: Andrews, G E
higher order acoustic modes FIV531 Comparison of methods for the determination of the SOF of
Al-Hinnawi, MF Quantitative mechanical assessment of the diesel particulates and development of a rapid TGA method
extraocular muscles H101 for the estimation of the unburnt fuel and lubricating oil
Al Kabie, HS The aerodynamics of radial swirlers in lean gas fractions EM109
turbine primary zones CET81 Determination of diesel engine lubricating oil consumption
Al-Khattat,I M A continuum and finite element model for through analysis of the calcium in diesel
compactable particulate solids CEI7 particulates EM171
Al-Kindi,G A An example of automatic two-dimensional The aerodynamics of radial swirlers in lean gas turbine primary
component inspection using computer vision B71 zones CET81
Allanson,D R_ Intelligent CNC for grinding B233 Antonakis,C J Safety is good engineering SD1
Antunes, J The numerical prediction of vibrations in tube bundles
induced by cross-flow turbulence FIV253
Proc Instn Mech Engrs Vol 205 ©lIMechE i992
AUTHOR INDEX
Anwer,M_ Calculations of a curved-pipe flow using Reynolds Baker, RC
stress closure C231 Editorial C364
Appleby,JC The design of low noise cams and cam pairs for a Flow visualization (book review) C364
wide range of operating conditions MS203 Response of bulk flowmeters to multiphase flows C217
Appleton, AD Power engineering applications of Bakhtar, F An experimental facility for studies of nucleating and
superconductors—a challenge to industry MP39 wet steam flows in turbine blading TM191
Arcoumanis, C Balachandar,R Blockage effects on cavitation inception
Frequency analysis of tumble and swirl in motored characteristics of bluff bodies C415
engines D177 Balasubramanian, B_ Numerical simulation in passenger car
In-cylinder flow measurements in motored internal combustion engine design and development CET235
engines ICE123 Baldwin, J Recycling of plastics containers in the UK—a 1991
Measurements of the flow in a Hydra direct-injection diesel update WC81
engine ICE113 Banisoleiman, K The interaction of diesel engine turbocharging
Armstrong,S D Combustion rate in a high-speed spark ignition and tuned inlet manifold systems under steady state and
engine ICE95 transient operation A269
Armstrong-Helouvry, B Control of machines with friction Banks, W M_ High pressure composite piping—the potential and
(book review) 1233 the problems MP91
Arnold, P C Barata Marques, MJ M_ A general three-dimensional finite
Conveyor transfer chute performance and design BM157 element approach for porous and dense metal-forming
Handling plant for bulk solids—improved productivity through a processes B257
systems approach to design BM293 Barbato,G Theory and practice of force measurement
Pneumatic conveying technology improving Australian bulk (book review) C437
handling operations BM117 Barbenel, J Quantitative mechanical assessment of the extraocular
Amone, A_ Navier-Stokes analysis of transonic cascade muscles H101
flow TM253 Barclay Nett energy flow analysis—constraints on the growth rate
Arques, P_ Predictive diagnosis applied to gas turbines CET189 of power station construction programmes (book review)
Arteaga, P Microstructural effects on stress and flow fields of A293
equal density granules in hopper BM265 Barkley, D Significance of flow-aberrations and weld-lines in
Arthurton, RIM The developing Tube FI glass-fibre reinforced thermoplastic injection
Ashley,C Testing and technology D3 mouldings MP113
Ask,T@_ Study of ignition in spark ignition engines with a Barlow,S V_ The interaction between the design of containers for
specially designed Schlieren system and digital image low level radioactive waste and the design of a deep
processing EM29 repository RW85
Aspinwall,D K Machining of hardened AISI H13 hot work die Barnard,P C The way forward PP63
steel using advanced ceramic tool materials MP221 Barnes,R H_ Safety is good engineering SD1
Astley, J A A review of human factors guidance applicable to the Barnes,R N- The automated measurement of the volumetric
design of offshore platforms SD79 contents of stockpiles contained in large A frame
Aston, J GL Computational fluid dynamics without complex facilities BMI151
mathematics: the advantages for thermofluids education A11 Barrand,JP Spilog non-circular gears for power
Attwood, R Blending and train loading of bulk iron ore: a case transmissions MS225
study BM211 Barratt,J DDB Submarine depth control during a high-speed
Auger,D D_ Design considerations for cushion form bearings in turn MSS55
artificial hip joints HS9 Barton,JR The Byker refuse derived fuel plant PW71
Awbi, H B Barton, P Quality assurance of waste packages to be disposed of
Computational fluid dynamics in ventilation FD67 at the Nirex deep repository RW43
The use of CFD techniques for the assessment and improvement Barton,R T Solid polymer fuel cells for electric vehicle
of a workshop ventilation system FD39 propulsion ICE67
Awolesi,S T The use of CFD techniques for the assessment and Basri,S B_ An experimental and numerical investigation into the
improvement of a workshop ventilation system FD39 thermal behaviour of a three-lobe profile bore bearing C251
Axisa, F Orifice plates as a source of vibrations in piping Bates,L Towards improved design for bulk solids handling
systems FIV313 plant BM281
Baudemont,C Geometric modelling and manufacturing of
Badowski, D F Feedpump leak-off control systems CPP59 centrifugal pumps blade surfaces CEI75
Bahrani, A S Bauer, W Numerical simulation in passenger car engine design
An evaluation of hip prostheses by endurance tests (abstract) and development CET235
H52 Bauert, F Product modelling—the key for industrial integration of
An investigation into the fixation of hip replacements H145 function, geometry, technology and knowledge
processing CEI65
Bai,G_ The application of titanium nitride plasma vapour Baul,R M_ Anexample of automatic two-dimensional component
deposition techniques in a high-speed ball bearing MP227 inspection using computer vision B71
Baines, N C Bayliss, R S Overpressure protection on an oil-producing
Flow in a radial turbine under equal and partial admission platform: an evolving situation SD27
conditions TM103 Beal, P A boilermaker’s response to the environmental
Power plant and systems an incremental approach to a final- challenge ER27
year course A53 Beards,C F System dynamics: a unified approach
Baines, TS The impact of a computer-based tape proving system (book review) C289
in enhancing the CADCAM manufacturing process in the Bearman, P W_ Non-linear vibration characteristics of a cylinder in
aircraft industry CC47 an oscillating water flow FIV21
©IMechE 1992 Proc Instn Mech Engrs Vol 205
AUTHOR INDEX
Beaufils, B The numerical prediction of vibrations in tube bundles Bloor, MS_ The role of product models in effective
induced by cross-flow turbulence FIV253 CADCAM CC113
Behennah, FE Editorial G69 Blount,GN__ Prediction of blank shape and strains in heavy gauge
Belanger, F Experimental investigations of the unsteady annular metal forming CEI13
flow between concentric and eccentric oscillating Blunsdon,C A Charge coupled device camera/computer analysis
cylinders FIV473 of flame propagation in a spark ignition engine, and some
Belardini, P The joint use of multi-dimensional modelling and comparisons with a computational fluid dynamic
field experiments in order to design diesel combustion model CET69
systems CET57 Boddy, C L_ Introducing autonomy to robotic manipulators in the
Bellamy, L J nuclear industry RW137
A review of human factors guidance applicable to the design of Bolton, HR High-speed motors with disc configuration MS107
offshore platforms SD79 Bone,S_ Technology strategy and how to develop an optimum
Pipework failure, failure causes and the management technology portfolio ER85
factor PS79 Boroomand, T Experimental tests on a new hydrodynamic bearing
Belmont, MR for low machine vibration MS173
A multiprocessor system for data acquisition and control of an Bott, TR Biofilm formation and control in flowing aqueous
engine test bed EM83 systems TFE213
A new technique which can measure changes in flame Boucher, R F A computational modelling approach to the design
temperature in I C engines prior to significant heat of stable ventilation systems E39
release EM41 Bouchet, J M_ Spilog non-circular gears for power
Combustion inhomogeneity and percolation D109 transmissions MS225
Beltagui,S A Modelling gas-fired furnace flow and combustion Bourne,R B_ Deformation of the cement mantle of tibial
using the PCOC code TFES1 components following total knee arthroplasty: a laboratory
Benedicto,L Offshore platform safety shut-down system study H211
effectiveness SD45 Bowker, P_ A quantitative assessment of orthoses for stabilization
Berg, HP Transfer systems in an underground of the anterior cruciate ligament deficient knee H81
repository RW163 Bowring, N A_ High resolution photographic inspection of a
Bergwerk, W_ Problems in developing process machinery E97 magnox reactor pressure vessel PS113
Berry,I1JG Corrugation of unmetalled roads (discussion) D73 Boysan, HF Internal flow modelling of vortex throttles C405
Bertodo, RG Bradley, D The rotating matrix swirling gas burner: performance
Interlinking—a post-team-working automotive deployment and computational design TFE43
strategy? D211 Bradley, MSA
On the implementation of severely compressed automobile Latest techniques for the design of reliable and energy efficient
product cycles D251 pneumatic conveyors BM125
Bertoli,C The joint use of multi-dimensional modelling and field Stepped pipelines—a new lease of life for lean phase pneumatic
experiments in order to design diesel combustion conveyors BM275
systems CETS7 Bradshaw,MN_ The impact of a computer-based tape proving
Besant, C B system in enhancing the CADCAM manufacturing process in
Distributed planning and control for flexible the aircraft industry CC47
manufacture CEI43 Brandon, JA On the applicability of modal and response
High-speed motors with disc configuration MS107 representations in the dynamic analysis of machine tool
Bevan, DI Output and efficiency of the closed-cycle gas turbine spindle bearing systems B139
AS9 Bray, A Theory and practice of force measurement
Bevan, PJ Output and efficiency of the closed-cycle gas turbine (book review) C437
AS9 Bray,D Recent research into the aerodynamics of ASTOVL
Bill, F Holistic safety engineering from an authority point of aircraft in ground environment G123
view SD9 Bray, K NC_ A laminar flamelet model of turbulent combustion in
Bisbjerg, P Best available technology for air pollution spark ignition engines ICE103
control ER105 Brear,F Development of radiotracer techniques for diesel fuel and
Bishop,J M_ Real time invariant grey level image processing using exhaust emission research ICE159
digital neural networks CEI187 Brebbia,C A Computers in biomedicine (book review) H261
Biwa,T The development of a double-layered cylinder Brett, P N
liner MP203 Analysis of bi-arm robots for applications in manufacturing
Blachut, J industry B43
Buckling design of imperfect welded hemispherical shells Multi-thermocouple probes for temperature prediction in the
subjected to external pressure C175 process industries E75
Towards optimum carbon-fibre-reinforced plastic end Brevick, J R Towards improving the properties of plaster moulds
closures C329 and castings B265
Black, ND Towards electronic message relay services for the Britton, AJ Design of advanced blading for a high-speed HP
hearing impaired (abstract) HS2 compressor using an S1—S2 flow calculation system TM59
Blair, G P Broglio,S Dynamic response of an undersea cable under current
A study of gas temperature effects on the prediction of unsteady and waves FIV101
flow ICE47 Broman, H_ Intervertebral motion during vibration H39
The two-stroke cycle engine, proscribe or prosper? D75 Broszeit,E Standardization of test procedures in surface
Blair, F Netherlands Railways new generation multiple units, engineering MP213
SM’90; concept definition for minimum life-cycle Broutman,L J Analysis and performance of fibre composites
costs F123 (book review) G139
Bland,R J Modelling of two-phase mixture flow and vaporization
in spark ignition engine intake systems ICE85
Proc Instn Mech Engrs Vol 205 ©IMechE 1992
AUTHOR INDEX
Brown, C N Cameron,D C_ Vapour deposited boron nitride thin films: a
A numerical study of fuel evaporation and transportation in the review MPI181
intake manifold of a port-injected spark-ignition Campbell, DJ An experimental investigation into the potential of
engine D161 small two-stroke diesel engines ICE171
The effects of mixture preparation and trapped residuals on the Campbell, DJ V_ Environmental control and energy recovery of
performance of a spark-ignition engine with air-shrouded port landfill gas: a conflict of interests? PW141
injectors, at low load and low speed D17 Campbell, NAF _ An investigation of thermal insulation of IDI
Brown, PG __ Instrumentation for determining the time-history of diesel engine swirl chambers D263
hydrocarbons in spark ignition engines EM19 Campbell, T Sequential turbocharging of marine diesel
Brown,R W_ Boiler feed pump leak-off systems C PPI engines ICE31
Brown, TD _ Stress wave effects in a finite element analysis of an Campistron,R An experimental analysis of the mechanisms
impulsively loaded articular joint H27 underlying fluid-elastic coupling in a square-in-line tube
Brownridge, JR Prediction and measurement of vortex induced bundle subject to water cross-flow FIV171
vibration in marine drilling operations FIV69 Cant,R S_ A laminar flamelet model of turbulent combustion in
Brunt, MF J Combustion rate in a high-speed spark ignition spark ignition engines ICE103
engine ICE95 Carson, J W
Bryce,JD The design and test of a turbine rotor blade for reduced Fine powder flow phenomena in bins, hoppers and processing
overtip loss TM293 vessels BM95
Buckingham, D J Techniques of in-bin blending BM247
A multiprocessor system for data acquisition and control of an Carson,R M_ Corrugation of unmetalled roads discussion D73
engine test bed EM83 Carvalho, FL The influence of control system design on the
A new technique which can measure changes in flame dynamic response characteristics of thermal power
temperature in I C engines prior to significant heat plants 1237
release EM41 Case, K The logical and geometric modelling of a universal
Combustion inhomogeneity and percolation D109 machine control reference architecture CEI189
Buckingham, RO _ Analysis of bi-arm robots for applications in Cavanagh, J Deviation in a mixed flow fan A241
manufacturing industry B43 Cawley, P Random vibration and statistical linearization
Bihlmann, E T (book review) C144
Flow induced vibrations in long corrugated pipes FIV417 Cebon,D_ Assessing the road-damaging potential of heavy
Multiple side-branches as tone generators FIV435 vehicles D223
Bullock, K J Use of classical control techniques to stabilize the Champ, P Distributed planning and control for flexible
electrical dynamics of a highly unstable road load manufacture CEI43
simulator 1253 Channon, PH Maintaining balance of a bipedal walking
Bullough, W A The electro-rheological catch/latch/clutch robot MS63
concept: implementation and prospects MS129 Chao,B T An improved correlation for two-phase frictional
Burdekin, M Evaluation of the effective parametric errors in pressure drop in boiling and adiabatic downflow in the
coordinate measuring machines using the locus of stylus on annular flow regime C317
the horizontal plane B123 Chapman,J Meeting vehicle pollution regulations by combustion
Burdess,JS_ Belt tensioning procedures on IC engines D121 technology TFE83
Burgess, S C Charlton, S J
A new one-way clutch made from thermoplastic An investigation of air motion and gas temperature in a motored
materials MS121 indirect-injection diesel engine ICE143
Analysis of failure modes of a thermoplastic one-way An investigation of thermal insulation of IDI diesel engine swirl
clutch C209 chambers D263
Burns,D J A structured approach to hazard assessment SD115 Flowmeter for measuring the unsteady bi-directional flow in the
Burns, ND ___J oint roles in manufacturing and the process of inlet port of a turbocharged diesel engine EM59
change B147 In-cylinder measurement of mixture strength in a turbocharged
Burrows,C R_ Editorial [1 natural gas engine EMI
Bush,GP_ An investigation into piston ring blowby and a Transient simulation of a highly turbocharged diesel engine with
discussion of its impact on biogas engines ICE177 variable valve timing CET149
Butcher, N A_ The role of predictive analysis in offshore Cheli, F Dynamic response of an undersea cable under current and
safety SD109 waves FIVIO1
Butler, MD_ The application of advanced surface modelling Chemoul, J. Control valve problems and solutions CPP47
techniques to the manufacture of tooling for ceramic Chen, B-S__ Robust observer-based control of a vibrating beam C77
artefacts CC85 Chen,C H On the natural frequencies of high-speed spindles with
Butscher, F Advanced diesel engines with integrated electronic angular contact bearings C147
systems CET161 Chen,SS_ A review of dynamic tube—support interaction in heat
Button, T W_ Properties and applications of bulk and thick film exchanger tubes FIV111
high temperature superconductors MP33 Chenot,J LA three-dimensional rigid-plastic finite element
Byrne,C B_ Anexpert system for the identification of assembly analysis of spur gear forging using the modular remeshing
tasks CEI135 technique Bl111
Cherry, NJ Hanger cable oscillations on the Humber
Caignaert,G Geometric modelling and manufacturing of Bridge FIV385
centrifugal pumps blade surfaces CEI75 Cheshire,D G_ The application of advanced surface modelling
Calvert,JR Pressure drop in foam flow TFE153 techniques to the manufacture of tooling for ceramic
Calvert, WJ Design of advanced blading for a high-speed HP artefacts CC85
compressor using an S1—S2 flow calculation system TM59 Chew, PE Liquid crystal mapping of local heat transfer in crossed
corrugated geometrical elements for air heat
exchangers TFE223
©IMechE 1992 Proc Instn Mech Engrs Vol 205
AUTHOR INDEX
Cho,HS_ An iterative learning controller for hydraulic servo- Conrad, F Mechanical design and control of the TUD-ESA
systems subjected to unknown disturbances [151 spherical near-field antenna test facility at Lyngby,
Choules,P R_ Design of large underground ore bins BM103 Denmark 1113
Chow, CH Inclusion of hydraulic lash adjuster behaviour and gas Conradie,F HD The influence of control system design on the
dynamic forces in camshaft design CET251 dynamic response characteristics of thermal power
Chris, AD Deformation of the cement mantle of tibial plants 1237
components following total knee arthroplasty: a laboratory Cook,G_ An investigation of thermal insulation of IDI diesel
study H211 engine swirl chambers D263
Christie, PI Vibration analysis of gas turbines by an intelligent Cooper, J Tyres—is reclamation the best possible economic
knowledge-based system G115 option for disposal? WC9
Christmann, A Future-orientated firing concept for refuse Corderoy, M P
incineration plants as executed at the Ludwigshafen The concept of computer integrated design CC141
plant PW13 The development of a user interface in an integrated gear design
Chung, T Y A response prediction model for flow induced analysis package CEI81
vibration of marine risers in sheared flow FIV87 Cormey,JR Advances in automatic machining of complex 2.5D
Churcher, P R FACES (forming attachments for components components CCS59
expert system) as expert system and hypertext system (quasi- Cory,W TW _ Overview of condition monitoring methods with
expert system) CEI145 emphasis on industrial fans A225
Ciofalo,M Turbulent flow and heat transfer predictions for cross- Coulthard, J M
corrugated rotary regenerators —TFE27 Friction and adhesion at bulk solids/wall interfaces BM49
Ciskowski, R D Computers in biomedicine (book review) H261 The transmission of vibration through wet particulate
Clark,DH _ A rationale for industrial-academic solids BM35
collaboration ER113 Coulthart,D R Mechanical handling systems in the Sellafield
Clark,I W Prediction of smoke movement using CFD TFE73 vitrification plant RW125
Clark, NN Computer based general shape description with Coutellier,D Reanalysis by modal synthesis of railway vehicle
polygonal harmonics and a roughness index E103 structures F101
Clarke, DG Cowell, T A transient technique for determining average heat
Simultaneous measurement of piston/piston ring friction and oil transfer coefficients in finned surfaces TFE189
film thickness in an] C engine EM51 Cowie,D W_ Bioengineering activities in the Department of
The measurement of piston assembly friction in a motored Orthopaedic Surgery and Trauma, Royal Adelaide Hospital,
engine ICE185 Adelaide, South Australia H257
Clarkson, BL Estimation of the coupling loss factor of structural Cox,JC Use of CFD in the design of a modern multistage aero
joints C17 engine LP turbine design TM1
Claypole, TC A feasibility study using a tin dioxide sensor in Crandall,S H The hysteretic damping model in vibration
engine exhaust gases ICE165 theory C23
Cleare,IM _ Certification of explosion protected electrical Crane,C D_ An overview of applied robotic technology developed
equipment SD53 in Florida MS1
Cole, AC Meeting vehicle pollution regulations by combustion Crane,R I Power plant and systems—an incremental approach to
technology TFE83 a final-year course A53
Cole, DJ Assessing the road-damaging potential of heavy Crawford, HV The CADCAM contribution to customized
vehicles D223 orthopaedic implants CC53
Cole,HC Microfoam innovative dust control BM207 Crayston, J An application of three-dimensional CAD to the
Collier,J G Power generation into the 21st century ER3 analysis of internal combustion engine cycles CC35
Collins, J J Muscle—ligament interactions at the knee during Croft,B C Environmental control and energy recovery of landfill
walking Hil gas: a conflict of interests? PW141
Collins, M W Croft,D G The influence of control system design on the dynamic
Experimental and theoretical study of the radiation of gases response characteristics of thermal power plants 1237
containing dust particles TFE95 Crone,M_ Effect of calf muscle stimulation and the venous foot
Liquid crystal mapping of local heat transfer in crossed pump on venous blood flow in the lower leg (abstract) H5S3
corrugated geometrical elements for air heat Crook, AW ASME publications on energy technology (book
exchangers TFE223 review) A144
Turbulent flow and heat transfer predictions for cross-corrugated Crooks, E Legislation and management of in-service
rotary regenerators TFE27 inspection PS13
Collinson, AE Cross-flow Strouhal numbers in square and Crossland, A W_ Pump leak-off valve and pressure reducing vessel
triangular pitch tube arrays at Reynolds numbers from development C PP17
0.8-3.5x 10° FIV217 Crutzen, S
Connolly,C F Use of CFD in the design of a modern multistage Inspection techniques assessment of non-nuclear structural
aero engine LP turbine design TM1 components along the PISC methodology PS69
Connon, P The Firth solids pump system: a new machine for PISC III astatus report PS105
feeding and metering solids SPU5S7 Culley, S J
Connors, H J A strategy for selecting engineering components B11
Calculation of tube-AVB wear from U-bend shaker test The concept of computer integrated design CC141
data FIV45 The development of a user interface in an integrated gear design
Simulation of flow induced vibration characteristics of a steam analysis package CEI81
generator U-tube FIV33 Cullyer,WJ High-integrity software for automotive
U-bend shaker test investigation of tube-AVB wear applications D185
potential FIV57 Cumpsty, NA Compressor aerodynamics (book review) G139
Proc Instn Mech Engrs Vol 205 ©IMechE 1992
AUTHOR INDEX
Dadone, A Applications of a high resolution shock-capturing Dent,JC Charge coupled device camera/computer analysis of
scheme to the unsteady flow computation in engine flame propagation in a spark ignition engine, and some
ducts CET119 comparisons with a computational fluid dynamic
Dagnall, S P model CET69
Industrial and commercial wastes as fuel—a review of UK Denton, AA Quality management offshore SD73
experience PW111 de O Falcao, AF Optimal phase control of wave power
Scrap tyres as an energy resource—a review WCl devices WE41
Dai,J S Geometric analysis and optimization of a symmetrical Dermendjian-Ivanova,D S_ On the hydroelasticity of one-span
Watt six-bar mechanism C275 pipelines with initial imperfections FIV277
Dailey,GM_ Use of CFD in the design of a modern multistage Devlukia, J A knowledge-based approach for fatigue analysis and
aero engine LP turbine design TM1 design of automotive components CEI107
Dale, B G De Waal, TW T_ Effective and flexible communication between
Japanese total quality control: a study of best practice B221 dissimilar CADCAM systems CC93
Quality costing at British Aerospace Dynamics: a case study Dickenson,S W_ The history and development of a national
G53 scheme for the assessment and certification of in-service
Dallas, J T Design and testing of a prototype slurry pump for FGD inspection bodies PS29
plants SPU9 Dietrich,M A biomechanical model of the human spinal
Daniel,D W Life cycle costing and the facts of life G133 system H19
Dargie,G Interactive robotics to aid physically disabled people in DiLin,P Active control of flow-excited acoustic resonance:
manufacturing tasks B241 higher order acoustic modes FIV531
Darling, J The use of acoustic emission for condition monitoring Dimentberg, MF A stochastic model of parametric excitation of a
in high-pressure hydraulic pumps MS137 straight pipe due to slug flow of a two-phase fluid FIV207
Dastane, A Vibration analysis of a blood processor centrifuge Dincher,C Towards improving the properties of plaster moulds
with anti-twister mechanism H95 and castings B265
Davies, AR Quality assurance of waste packages to be disposed Diomataris, C Some developments in the application of
of at the Nirex deep repository RW43 computational fluid dynamics to flows in internal combustion
Davies, B L engine cylinders TFE129
Knowledge-based design system for light engineering Djahansouzi,B A computational model of wave induced response
components CC135 of acompliant cylinder FIV333
The development of a surgeon robot for prostatectomies H35 Dobell, MH _ Central Line rolling stock—from concept to contract
Davies, D K Electrostatic problems in powder handling BM55 F55
Davies, D L Flowmeter for measuring the unsteady bi-directional Dodson,J Application and design of magnetic drive
flow in the inlet port of a turbocharged diesel engine M59 pumps PP39
Davies, P T Knowledge-based engineering systems in Dominy,RG_ A technique for the investigation of transient
practice CC121 aerodynamic forces on road vehicles in cross winds D245
Davis, AG_ The regulatory implications of the use of glass Donelan, P_ The interaction between the design of containers for
reinforced plastics as a structural material in platform low level radioactive waste and the design of a deep
topsides SD61 repository RW85
Davis,J W Towards improving the properties of plaster moulds Donn,SG _ The management of radioactive wastes at BNFL,
and castings B265 Sellafield RW15
Davis, R K A systems approach to machinery design and Douglas,R A study of gas temperature effects on the prediction of
implementation MS19 unsteady flow ICE47
Day, AJ Douthwaite,C An application of three-dimensional CAD to the
Disc brake interface pressure distributions D137 analysis of internal combustion engine cycles CC35
Drum brake interface pressure distributions D127 Downing,S W_ Dust controlled loading and stockpiling of dry
Thermal effects and pressure distributions in brakes D199 bulk materials .BM239
Dean, T A_ Analysis of dimensional accuracy of precision forged Dowsett, DJ Digital techniques used for automatic image
axisymmetric components B171 registration (abstract) H51
Dear, JP A linked experimental study and modelling analysis of Dowson, D
crack propagation in high grade polymeric Design considerations for cushion form bearings in artificial hip
materials MP173 joints H59
Dechant, K-E_ The stress test—a procedure for the rehabilitation Elastohydrodynamic lubrication of elliptical contacts with spin
of pipelines PS91 and rolling C165
Defretin, A L Medical engineering—the multi-disciplinary challenge H1
Geometric modelling and manufacturing of centrifugal pumps Stress analysis of cushion form bearings for total hip
blade surfaces CEI75 replacements H219
Spilog non-circular gears for power transmissions MS225 Tribology of total artificial joints MP7, H73
De Langre,E The numerical prediction of vibrations in tube Doyle, D M_ Developing the truck engine for ultra low
bundles induced by cross-flow turbulence FIV253 emissions D149
Del Giacomo, N_ The joint use of multi-dimensional modelling Doyle,R The logical and geometric modelling of a universal
and field experiments in order to design diesel combustion machine control reference architecture CEI189
systems CETS7 Druce,G Systematic design of machinery cams MS193
Deniz,S A comparison of experimentally and theoretical Duan,S Y Modelling, parameter selection and simulation of a
determined lift coefficients for a transversely oscillating single-cylinder four-cycle engine 149
cylinder with rectangular cross-section FIV7 Dubourg, MFP Low level waste management and dose reduction
programmes in PWRs RWI19
©IMechE 1992 Proc Instn Mech Engrs Vol 205
AUTHOR INDEX
Duckers, LJ Wave energy research and development around the Etemad,MR_ High-speed motors with disc
world WE7 configuration MS107
Duffy, J An overview of applied robotic technology developed in Evans,D_ The history and development of a national scheme for
Florida MSI1 the assessment and certification of in-service inspection
Duggins,R K A proposal for improving the modelling of bodies PS29
turbulence TFE15 Evans,G V_ The transfer of energy efficient practices to
Dutton,G N Quantitative mechanical assessment of the industry ER35
extraocular muscles H101 Evans,R A_ Hanger cable oscillations on the Humber
Dutton, TP The interaction between the design of containers for Bridge FIV385
low level radioactive waste and the design of a deep Ewins, D J
repository RW85 Non-linear sensitivity analysis of mechanical structures using
Duxbury,J M Some experiences of advanced manufacturing cells modal data C67
at British Aerospace Warton Unit G59 On how receptances enable dynamic behaviour prediction in
structures C29
Eastwood,PG_ A feasibility study using a tin dioxide sensor in
engine exhaust gases ICE165 Fahlenkamp,H Flue gas cleaning—a must for ensuring public
Ebadat, V_ Electrostatic problems in powder handling BM55 acceptance of refuse incineration plants PW127
Eckford, ND_ Integral leak-off/non return valve design CPP29 Falcéo, M Dynamic actions due to wave motion on horizontal
Edge, K A submerged cylinders oscillating in vertical direction FIV93
Experimental investigation of flow and force characteristics of Fan, C-N Combined boundary integral equation and null-field
hydraulic poppet and disc valves A161 equation method for hydrodynamic effects of two-
In-situ measurement of the wavespeed and bulk modulus in dimensional exterior wave problem FIV263
hydraulic lines 1191 Fang, JIE Vortex induced vibrations of tensioned and catenary
Numerical simulation of fluid flow in poppet valves TFE119 marine risers FIV75
The impedance characteristics of fluid power components: relief Farge, T Z_ The effect of hub total pressure deficient radial inlet
valves and accumulators I11 distortion on centrifugal impeller flow TM113
The impedance characteristics of fluid power components: Faulkner,S A Developing the truck engine for ultra low
restrictor and flow control valves [3 emissions D149
Edrees, HJ Sintering of silicon nitride based ceramic matrix Fawcett, JN Belt tensioning procedures on IC engines D121
composites MP191 Fawcett, NS J Getting started withCFD FD1
Edwards,S C Microclimate performance of an open atrium office Fenocchi, A High-speed motors with disc configuration _MS107
building: a case study in thermo-fluid modelling FD81 Fermer,M_ Transient brake temperatures found by use of
Ehrlich,D Transfer systems in an underground analytical solutions for finite hollow cylinders C189
repository RW163 Ferraresi,C Experimental analysis and dynamic simulation of an
Eickhoff, B M electro-pneumatic proportional valve for pressure
The application of independently rotating wheels to railway control MS219
vehicles F43 Ffowcs-Williams, JE The dynamics of ships
Three dimensional elastic bodies in rolling contact (book (book review) C439
review) F150 Fielder,H The role of innovation centres ER163
Eilts, P Similarity considerations on wall heat losses in internal Finlay, J B Deformation of the cement mantle of tibial
combustion engines A139 components following total knee arthroplasty: a laboratory
Eisinger, F L Combustion air flow induced furnace vibration in an study H211
oil-fired utility boiler—a case study FIV427 Firoozian, R
Ekebuisi,GO Industrialization of expert systems CEI115 A hybrid method for the vibration analysis of rotor—bearing
Elamir,IE Determination of diesel engine lubricating oil systems C131
consumption through analysis of the calcium in diesel The electro-rheological catch/latch/clutch concept:
particulates EM171 implementation and prospects MS129
El Baradie, M A Statistical theory of machine tool Firth,D The Firth solids pump system: a new machine for feeding
stability B195 and metering solids SPU57
Elder, R L Fisher, J
Compressor aerodynamics (book review) G139 Design considerations for cushion form bearings in artificial hip
Computations of three-dimensional viscous turbulent flows in joints H59
centrifugal compressors with tip leakage TM123 Stress analysis of cushion form bearings for total hip
Flow separation in a high-speed impeller passage ICE1 replacements H219
Laser anemometry in turbomachines Gl Tribology of total artificial joints MP7, H73
Elliott,C Transient simulation of a highly turbocharged diesel Fisher, NJ Fretting wear damage prediction in the inlet region of
engine with variable valve timing CET149 nuclear steam generators FIV149
El-Mahdy, TO Morpho-tribo-mechanical characteristics of the Fitzgerald, BP A structured approach to hazard
articular cartilage in animals under conditions of assessment SD115
hypokinesis H251 Fleck,R An experimental investigation into the potential of small
Else, K Prediction of smoke movement using CFD TFE73 two-stroke diesel engines ICE171
Emsile,S V_ The role of CFD modelling in design for safety and Fleming, PJ Parallel implementations of gas turbine simulations
environmental management FD99 using transputers 1199
Ennis, J T Digital techniques used for automatic image Fogarasy, A A An example of vibration isolation in high-speed
registration (abstract) H51 indexing machinery MS165
Enotiadis, AC Frequency analysis of tumble and swirl in motored Fogarty, TC Putting energy efficiency into the control
engines D177 loop ER39
Epstein, M A Farrell Respiratory biomechanics—engineering Foley, AG _ Liquid phase bonding technology for joining ceramics
analysis of structure and function (book review) H203 to metals MP155
Proc Instn Mech Engrs Vol 205 ©lIMechE 1992
AUTHOR INDEX
Fone,C J The increasing pressures on process plant operators and Galletly,G D
how mechanical seal technology is keeping pace PP1 Buckling design of imperfect welded hemispherical shells
Forster,C P Laser anemometry in turbomachines G1 subjected to external pressure C175
Fortescue, P Spacecraft systems engineering Towards optimum carbon-fibre-reinforced plastic end
(book review) G140 closures C329
Foss, P Exhaust hydrocarbon emissions during the running-in Gan,G Computational fluid dynamics in ventilation FD67
period of a spark ignited engine EM121 Gardner, F W Commercial low level waste disposal sites in the
Foster, J T Best available technology for air pollution United States: the past and the future RW1
control ER105 Gardner, N The development of radiometric waste monitoring
Foster, K Design and development of a flexible high-speed systems at the Sellafield reprocessing complex RW35
machine system for confectionery cartoning MS25 Gardner, NDR_ Landfill gas extraction from buried refuse: design
Foulston, J Technical evaluation of a CAD system for orthopaedic considerations PW85
shoe-upper design H109 Garner,C P Charge coupled device camera/computer analysis of
Fowler,J R The use of structural adhesives in the construction of flame propagation in a spark ignition engine, and some
rail vehicles F131 comparisons with a computational fluid dynamic
Fox,GH_ The development of radiometric waste monitoring model CET69
systems at the Sellafield reprocessing complex RW35 Gasiorek, JM _ Deviation in a mixed flow fan A241
Fox, MF Gaskell, P H The rotating matrix swirling gas burner:
An investigation into piston ring blowby and a discussion of its performance and computational design TFE43
impact on biogas engines ICE177 Gatiss, J Interactive robotics to aid physically disabled people in
Lubricating oil extraction and chemical analysis EM115 manufacturing tasks B241
France,ER Simulation of flow induced vibration characteristics Gautier,R Techniques for assessing the flowability of sodium
of a steam generator U-tube FIV33 carbonate (soda ash) BM41
Fraser,C J Thermofluid mechanics: a computer integrated Gavrjushenko, NS_ Morpho-tribo-mechanical characteristics of
teaching approach A43 the articular cartilage in animals under conditions of
Fredsge, J Correlation measurements along a vibrating cylinder hypokinesis H251
near a wall in oscillatory flows FIV15 Geldart,D Techniques for assessing the flowability of sodium
French, B A_ The interaction of diesel engine turbocharging and carbonate (soda ash) BM41
tuned inlet manifold systems under steady state and transient Gethin, D T An experimental and numerical investigation into the
operation A269 thermal behaviour of a three-lobe profile bore bearing C251
French,M J_ Latest developments in wave energy at Geyer, TA W
Lancaster WE13 A review of human factors guidance applicable to the design of
Freund,L B Dynamic fracture mechanics (book review) C144 offshore platforms SD79
Fricker, AJ Vibro-impacting behaviour of fluid-elastically Pipework failure, failure causes and the management
unstable heat exchanger tubes with support factor PS79
clearances FIV129 Gichaga, FJ Corrugation of unmetalled roads (discussion) D73
Fried,O J Central Line rolling stock—from concept to contract Ghadiri, M__ Evaluation of a flow control system for granular
F55 materials using the electromechanical valve for
Frost, AP The role of vibration health monitoring in ensuring solids BM131
maximum utilization of rotating machinery MS145 Giannattasio, P Applications of a high resolution shock-capturing
Frost, H A contribution to the understanding of turbocharger scheme to the unsteady flow computation in engine
turbine performance in pulsating flow ICE19 ducts CET119
Frost, TH Shut-off head of centrifugal pumps and fans A217 Gibbins, J R Power plant and systems—an incremental approach
Fuchs, HP Diesel fuel spray visualization by laser induced to a final-year course AS5S3
fluorescence EM135 Gibson, J Interactive robotics to aid physically disabled people in
Fuggle,R N Modelling gas-fired furnace flow and combustion manufacturing tasks B241
using the PCOC code TFES1 Gibson, P R_ Experiences in co-operative education BS
Fujii, T Dynamic flow characteristics of reactor internal Gibson,S Dynamic test cells versus chassis dynos: a correlation
components—a scale model experiment FIV159 exercise EM75
Fujitani, K Computational study on three-dimensional flow Gill, D W_ A general purpose simulation model for high-pressure
around a heavy-duty truck body TFE21 fuel injection and other mechanical-hydraulic
Fukuda, T The development of a double-layered cylinder systems CET269
liner MP203 Gill, K F An example of automatic two-dimensional component
Fung, YC Biomechanics motion, flow, stress and growth (book inspection using computer vision B71
review) H55 Ginder,R B_ Design of advanced blading for a high-speed HP
Furniss, D K Incineration of liquid and gaseous waste as part of compressor using an S1—S2 flow calculation system TM59
production PW21 Girgis, NS
Furuhama,S The power system of a computer controlled A fibre optic laser Doppler anemometer, data acquisition system,
hydrogen car—GH, injection and spark ignition engine with and analysis procedure for evaluating the pre-ignition flow
LH, tank and pump CET179 field of a motored spark ignition engine EM163
Fussey, DE Development of radiotracer techniques for diesel fuel Analysis of the combustion of methane in a spark ignition
and exhaust emission research ICE159 internal combustion engine ICES55
Gladwell,G ML _ On the scattering of waves in a non-uniform
Gaddis, F The application of data bases for the classification and Euler—Bernoulli beam C31
standardization of industrial and consumer products CEI97 Godfrey,P R The regulatory implications of the use of glass
Galbraith, J Sequential turbocharging of marine diesel reinforced plastics as a structural material in platform
engines ICE31 topsides SD61
Gallacher, A Dynamic test cells versus chassis dynos: a Goff, DJ Financing of new technology products ER49
correlation exercise M75
©lIMechE 1992 Proc Instn Mech Engrs Vol 205
10 AUTHOR INDEX
Golding, P Meeting the solid waste challenge—the contribution of Giil, MZ
aluminium can recycling WC41 Development of advanced turbulence models for the calculation
Gonzalez-Alvarez,E In-service inspection management: of flows in internal combustion engine cylinders CET7
inspection manual and programs PS101 Some developments in the application of computational fluid
Goodwin, J W_ A submersible slurry pump for difficult dynamics to flows in internal combustion engine
duties SPU45 cylinders TFE129
Goodwin, M J Gyarmathy,G On the change of impeller flow non-uniformities
Analysis of the combustion of methane in a spark ignition with flow rate in a centrifugal compressor TM143
internal combustion engine ICE55 Gyr, A Structure of turbulence and drag reduction
Experimental tests on a new hydrodynamic bearing for low (book review) C143
machine vibration MS173
Gosine,R G_ Interactive robotics to aid physically disabled people Haagensen, S_ Spark ignition engine cyclic variability
in manufacturing tasks B241 measurement using optical probes EM7
Gosman, A D Interactive computational fluid dynamics tools for Habibi,S R Computed-torque and variable-structure multi-
engine design CET1 variable control of a hydraulic industrial robot 1123
Goss, WRET Designing for adhesives MP139 Hackwell,G B Manufacturing simulation: a crystal ball for the
Gou,J The surface behaviour and wear properties of factory floor CEI125
agate MP197 Hacohen, J
Gover,MP_ The effect of variations in local air/fuel ratio on cyclic A multiprocessor system for data acquisition and control of an
variability in a firing production engine EM143 engine test bed EM83
Goyal, K C_ Elastohydrodynamic studies of three-lobe journal A new technique which can measure changes in flame
bearings with non-Newtonian lubricants C379 temperature in I C engines prior to significant heat
Goyder, HG D release EM41
Cleaning fabric filters—a useful application of flow induced Hadjiapostolou, A Measurements of the flow in a Hydra direct-
vibration FIV191 injection diesel engine ICE113
Impact analysis of loosely supported heat exchanger Hagiwara, T Self-induced oscillation of free surface in a tank with
tubes FIV139 circulating flow FIV539
Wall pressure distribution on an in-line tube bundle in cross- Hailey,JSM_ The need to design for maintenance WE47
flow FIV517 Hall, D M Computational methods for the aerodynamic
Graham, J MR A computational model of wave induced response development of large steam turbines TM11
of a compliant cylinder FIV333 Hall, N Transportation of solids using vibratory troughs BM81
Graham, M A_ Development of radiotracer techniques for diesel Hammond,SP _ Microclimate performance of an open atrium
fuel and exhaust emission research ICE159 office building: a case study in thermo-fluid
Granger,S An experimental analysis of the mechanisms modelling FD81
underlying fluid-elastic coupling in a square-in-line tube Hanby, VI Simulation: a tool for improving the design
bundle subject to water cross-flow FIV171 process TFE229
Grant, J Exploitation of modern flow computation techniques in Hance,C Effective engineering support for British Rail’s vehicle
the design of turbine blading TFES9 fleet CC67
Grant, MM_ A structured approach to hazard assessment SD115 Hancke, T A Distributed planning and control for flexible
Green,G A_ Transportation of solids using vibratory manufacture CEI43
troughs BM81 Hancock, P Advantages of academic-industrial
Greenbank,S J Landing gear—the aircraft requirement G27 collaboration ER125
Gregory-Smith,DG_ A simple method for the calculation of Hands, B A OXTOPS: a computer program for teaching
secondary flows in annular cascades —TM227 thermodynamic cycles A31
Griffiths, J F Haneda, H The construction of 700 MW units with advanced
Fundamental studies related to combustion in diesel steam conditions A249
engines ICE151 Hannis,J M_ The design and development of a high work
Tests for monitoring the degradation of antioxidants in transonic turbine stage TM33
lubricating oils EM97 Hansen, T Study of ignition in spark ignition engines with a
Groome, R D specially designed Schlieren system and digital image
A process industry view of the requirements for an in-house processing EM29
inspection organization PS23 Hansford,S M_ Mechanical handling systems in the Sellafield
The new pressure systems and transportable gas containers vitrification plant RW125
regulations, Part 1: Inspection procedures to meet the Hansson, T Intervertebral motion during vibration H39
regulations E83 Hara, F
Grootenhuis, P_ A link between structural resonance and room A theory of vibrational instability of a rotating cylinder filled
acoustics C35 with two liquids of different density FIV199
Grotstollen, H Acquisition, transfer and processing of signals in Two-phase flow unsteady dynamic forces acting on a single row
an electromagnetically disturbed environment MS31 of vibrating circular cylinders FIV369
Guha, A Time-marching prediction of unsteady condensation Harari, R A simple and realistic model for the scavenging process
phenomena due to supercritical heat addition TM167 in a crankcase-scavenged two-stroke cycle engine A129
Guha,S K Shear properties of articular cartilage of a bovine knee Hardie, WR _ Deformation of the cement mantle of tibial
joint subjected to moderate and high loads: an experimental components following total knee arthroplasty: a laboratory
study H89 study H211
Hardy,S J A parametric study using a single cam-follower system
dynamic model D273
Harris,B A perspective view of composite materials
development MP57
Proc Instn Mech Engrs Vol 205 ©IMechE 1992