Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2007: Vol 221 Index & Table of Contents

2007·2.2 MB·English

Author Index 2007
Abhari, RS In-engine turbine heat transfer measurement
Abhari, RS Stator-clocking effects on the unsteady interaction of secondary flows in a 1.5-stage
unshrouded turbine
Adami, P Analysis of the shroud leakage flow and mainflow interactions in high-pressure turbines
using an unsteady computational fluid dynamics approach
Aggidis, GA Time series analysis-based adaptive tuning techniques for a heaving wave energy
converter in irregular seas
Agrawal, V P Real-time commercial availability index of a steam power plant: graph theory and
matrix method
Ahn,J M Scroll expander for power generation from a low-grade steam source
Albuquerque, R B F Conceptual optimization of axial-flow hydraulic turbines with non-free vortex design
Allan, G Impact of alternative electricity generation technologies on the Scottish economy: an
illustrative input-output analysis
Almatar, O Prediction of the long-term electric power demand under the influence of A/C systems
Al-Mulla Ali, A Prediction of the long-term electric power demand under the influence of A/C systems
Al-Nimr, MA Evaporative system for water and beverage refrigeration in hot countries
Al-Qahtani, M Entropy generation in a rotating channel
Alsalihi, Z A comparison of conjugate heat transfer methods applied to an axial helium turbine
Alsayegh, O Prediction of the long-term electric power demand under the influence of A/C systems
Al-Shibl, K Modelling windage power loss from an enclosed spur gear
Arai, N A novel high-performance low-NO, fuel-rich/fuel-lean two-stage combustion gas and
steam turbine system for power and heat generation
Arikoglu, A Entropy generation in laminar natural convection from a constant temperature vertical
plate in an infinite fluid
Atlar, M An experimental investigation on cavitation, noise, and slipstream characteristics of
ocean stream turbines
Bahaj, AS Tidal energy resource assessment for tidal stream generators
Bakir, F Numerical and experimental study of unsteady flow in a centrifugal fan
Balcz6, M Aerodynamic effects of forward blade skew in axial flow rotors of controlled vortex
design
Bansal, P K Thermodynamic analysis of an in-situ cogeneration plant
Barltrop, N Investigation into wave—current interactions in marine current turbines
Basha, M Entropy generation in a rotating channel
Behr, T Stator-clocking effects on the unsteady interaction of secondary flows in a 1.5-stage
unshrouded turbine
Belosevic, SV Computational fluid dynamics technique as a tool for description of the phenomena
occurring in pulverized coal combustion systems
Benini, E Innovative procedure to minimize multi-row compressor blade dynamic loading using
rotor-stator interaction optimization
Bertini, F Velocity and turbulence measurements in a separating boundary layer with and without
passive flow control
Bhatti, TS A new load frequency control technique for an isolated small hydropower plant
Bickerdyke, A Self-starting capability of a Darrieus turbine
Blunden, LS Tidal energy resource assessment for tidal stream generators
Bois, G Influence of external geometrical modifications on the flow behaviour of a rotor—stator
system: numerical and experimental investigation
Boroomand, M Recirculation casing treatment by using a vaned passage for a transonic axial-flow
compressor
Bothien, MR Time domain modelling and stability analysis of complex thermoacoustic systems
Brouckaert, J F Fast response aerodynamic probes for measurements in turbomachines
Brunner, M H In-engine turbine heat transfer measurement
Bryden, 1G Tidal current resource assessment
Bu, G Research on oil-free hermetic refrigeration scroll compressor
Bussolin, A Performance analysis of a transonic high-pressure turbine
© IMechE 2007 Proc. IMechE Vol. 221 Part A: J. Power and Energy
Author Index 2007
Byrne, AA NO, formation pathways in lean-premixed-prevapourized combustion of fuels with
carbon-to-hydrogen ratio between 0.25 and 0.88
Calvert, WJ Predicted and measured performance and stability of two variants of a military fan
Casey, MV Accounting for losses and definitions of efficiency in turbomachinery stages
Casey, MV Predictions of non-equilibrium phase transition in a model low-pressure steam turbine
Casey, M Experimental studies of the jet of a Pelton turbine
Cecchi, S Analysis of the shroud leakage flow and mainflow interactions in high-pressure turbines
using an unsteady computational fluid dynamics approach
Celik, AN An investigation into micro wind energy systems for their utilization in urban areas and
their life cycle assessment
Chamra, LM Methodology to performa non-conventional evaluation of cooling, heating, and power
systems
Chamra, LM Performance analysis of different working fluids for use in organic Rankine cycles
Chen, C-K Exergy destruction minimization of an irreversible Carnot refrigeration cycle
Chen, H Numerical simulations of stall inside a centrifugal compressor
Chen, L Model of real absorption heat pump cycle with a generalized heat transfer law and its
performance
Chi, P-H Effect of channel step-depth on the performance of proton exchange membrane fuel
cells
Chick, J P Efficiency and dynamic performance of Digital Displacement™ hydraulic transmission
in tidal current energy converters
Chick, J P Energy and carbon audit of an offshore wave energy converter
Chu, W Behaviour of tip-leakage flow in an axial flow compressor rotor
Chu, W Numerical investigations of the flow mechanisms in a subsonic compressor rotor with
axial-skewed slot
Clarke, JA Design and testing of a contra-rotating tidal current turbine
Clarke, P An investigation into micro wind energy systems for their utilization in urban areas and
their life cycle assessment
Clelland, D Investigation into wave-current interactions in marine current turbines
Cocco, D Comparative study on energy sustainability of biofuel production chains
Connor, G Design and testing of a contra-rotating tidal current turbine
Corsini, A Development of improved blade tip endplate concepts for low-noise operation in
industrial fans
Costall, A Effect of volute geometry on the steady and unsteady performance of mixed-flow
turbines
Couch, SJ Tidal current resource assessment
Crisford, M Thermodynamic analysis of an in-situ cogeneration plant
Cui, MM Investigation on the oil supply system of a scroll compressor
D’Haudt, E Influence of external geometrical modifications on the flow behaviour of a rotor-stator
system: numerical and experimental investigation
Dagaut, P NO, formation pathways in lean-premixed-prevapourized combustion of fuels with
carbon-to-hydrogen ratio between 0.25 and 0.88
Datta, A Contributions of self-absorption and soot on radiation heat transfer in a laminar
methane-air diffusion flame
Dear, I D Optical strain monitoring techniques for life assessment of components in power
generation plant
Dear, J P Optical strain monitoring techniques for life assessment of components in power
generation plant
Debuchy, R Influence of external geometrical modifications on the flow behaviour of a rotor—stator
system: numerical and experimental investigation
Della Gatta, S Influence of external geometrical modifications on the flow behaviour of a rotor—stator
system: numerical and experimental investigation
Domercg, O Tip clearance effect on high-pressure compressor stage matching
Dominy, J Self-starting capability of a Darrieus turbine
Dominy, R Self-starting capability of a Darrieus turbine
Doolla, S A new load frequency control technique for an isolated small hydropower plant
Du, Z-H Numerical simulations of stall inside a centrifugal compressor
Eastwick, C N Modelling windage power loss from an enclosed spur gear
Edwards, M J Reciprocating thermocompressor performance with non-ideal component characteris-
tics
Ehsan, M Efficiency and dynamic performance of Digital Displacement™ hydraulic transmission
in tidal current energy converters
Emmerson, PR Predicted and measured performance and stability of two variants of a military fan
Engin, T Prediction of relative efficiency reduction of centrifugal slurry pumps: empirical- and
artificial-neural network-based methods
Escuret, J-F Tip clearance effect on high-pressure compressor stage matching
Fairouz, F Prediction of the long-term electric power demand under the influence of A/C systems
Proc. IMechE Vol. 221 Part A: J. Power and Energy © IMechE 2007
Author Index 2007
Farthing, S P Optimal, robust, and benign horizontal and vertical axis wind turbines
Feng, Z Effects of shape factors on flow and heat transfer in corrugated—undulated channels
with sinusoidal waves
Ferng, Y-M Effect of channel step-depth on the performance of proton exchange membrane
fuel cells
Ferrari, M L Early start-up of solid oxide fuel cell hybrid systems with ejector cathodic
recirculation: experimental results and model verification
Filkoski, RV Computational fluid dynamics technique as a tool for description of the phenom-
ena occurring in pulverized coal combustion systems
Foreman, M Tidal current energy assessment for Johnstone Strait, Vancouver Island
Fraenkel, P L Marine current turbines: pioneering the development of marine kinetic energy
converters
Fu, J Experimental and numerical investigation of interaction between turbine stage and
exhaust hood
Fumo, N Methodology to performa non-conventional evaluation of cooling, heating, and
power systems
Furuhata, T A novel high-performance low-NO, fuel-rich/fuel-lean two-stage combustion gas
and steam turbine system for power and heat generation
Gandhi, O P Real-time commercial availability index of a steam power plant: graph theory and
matrix method
Gandjalikhan Nassab, S A Transient theoretical analysis of a multi-layered type of heat exchanger using porous
media
Gandjalikhan Nassab, S A Thermal analysis of a self-insulated type of radiant porous air heater using the 421
spherical harmonics method
Garrett, C Tidal current energy assessment for Johnstone Strait, Vancouver Island 147
Gazzar, M El Numerical and experimental study of the influence of drag reduction agent (carboxy 1067
methyl cellulose) on the central jet pump performance
Gerber, AG Predictions of non-equilibrium phase transition in a model low-pressure steam
turbine
Giannakoglou, K C Total pressure loss minimization in turbomachinery cascades using a new contin-
uous adjoint formulation
Gill, A Fundamentals of four-quadrant axial flow compressor maps
Ginder, RB Predicted and measured performance and stability of two variants of a military fan
Govardhan, M Computational study of the effect of sweep on the performance and flow field in an
axial flow compressor rotor
Grant, AD Design and testing of a contra-rotating tidal current turbine
Grant, A Investigation into wave—current interactions in marine current turbines
Guo, Q Numerical simulations of stall inside a centrifugal compressor
Gupta, AVSSKS Parametric simulation of steam injected gas turbine combined cycle
Hakeem, I Effect of volute geometry on the steady and unsteady performance of mixed-flow
turbines
Han, CW Numerical study of the use of photovoltaic-Trombe wall in residential buildings in
Tibet
Harms, TM Fundamentals of four-quadrant axial flow compressor maps
Harrison, G P Energy and carbon audit of an offshore wave energy converter
Hassan, AS Influence of the volute design parameters on the performance of a centrifugal
compressor of an aircraft turbocharger
He, HF Numerical study of the use of photovoltaic-Trombe wall in residential buildings in
Tibet
He, L Model of real absorption heat pump cycle with a generalized heat transfer law and
its performance
Horvath, Cs Aerodynamic effects of forward blade skew in axial flow rotors of controlled vortex
design
Howe, D Characteristics of linear compressors under current source excitation
Huang, GH Reaction thrust of submerged water jets
Iacovides, H Internal blade cooling: the Cinderella of computational and experimental fluid
dynamics research in gas turbines
Imtiaz, H Effect of partial substitution of diesel fuel by natural gas on performance parameters
of a four-cylinder diesel engine
Jahirul, MI Effect of partial substitution of diesel fuel by natural gas on performance parameters
of a four-cylinder diesel engine
Jain, S Thermodynamic analysis of an in-situ cogeneration plant
Janiga, G Reducing the CO emissions in a laminar burner using different numerical optimiza-
tion methods
ji,J Numerical study of the use of photovoltaic-Trombe wall in residential buildings in
Tibet
Johnstone, C M Design and testing of a contra-rotating tidal current turbine
© IMechE 2007 Proc. IMechE Vol. 221 Part A: J. Power and Energy
Author Index 2007
Jung, G-B Effect of channel step-depth on the performance of proton exchange membrane fuel
cells
Kalfas, AI Stator-clocking effects on the unsteady interaction of secondary flows in a 1.5-stage
unshrouded turbine
Kamal, MM Investigation of liquid fuel combustion in a cross-flow burner
Kamal, MM NO, emission performance of triple flames
Kamal, MM Soot formation and oxidation in normal and inverse diffusion flames
Khaleghi, H Recirculation casing treatment by using a vaned passage for a transonic axial-flow
compressor
Kim, HJ Scroll expander for power generation from a low-grade steam source
Kiprakis, A E Efficiency and dynamic performance of Digital Displacement™ hydraulic transmis-
sion in tidal current energy converters
Komurgoz, G Entropy generation in laminar natural convection from a constant temperature
vertical plate in an infinite fluid
Kouidri, S Numerical and experimental study of unsteady flow in a centrifugal fan
Kourmpetis, M Optical strain monitoring techniques for life assessment of components in power
generation plant
Krishna Kumar, O G Computational study of the effect of sweep on the performance and flow field in an
axial flow compressor rotor
Kwedikha, ARA Aerodynamic effects of forward blade skew in axial flow rotors of controlled vortex
design
Lacarelle, A Time domain modelling and stability analysis of complex thermoacoustic systems
Launder, BE Internal blade cooling: the Cinderella of computational and experimental fluid
dynamics research in gas turbines
Leboeuf, F Numerical simulation of the flow in a Pelton turbine using the meshless method
smoothed particle hydrodynamics: a new simple solid boundary treatment
Lee, J CY NO, formation pathways in lean-premixed-prevapourized combustion of fuels with
carbon-to-hydrogen ratio between 0.25 and 0.88
Leijon, M Direct electric energy conversion system for energy conversion from marine currents
Li,G Effects of shape factors on flow and heat transfer in corrugated—undulated channels
with sinusoidal waves
Li, L Research on oil-free hermetic refrigeration scroll compressor
Li, Y P Reaction thrust of submerged water jets
Liao, AH Finite element method-based three-dimensional frictional contact analysis of tur-
bocharger compressor
Lin, Q Structure of reaction zone of normal temperature air flameless combustion in a 2
ton/h coal-fired boiler furnace
Lin, Z Characteristics of linear compressors under current source excitation
Lior, N A novel high-performance low-NO, fuel-rich/fuel-lean two-stage combustion gas
and steam turbine system for power and heat generation
Liu, J Experimental and numerical investigation of interaction between turbine stage and
exhaust hood
Lohasz, MM Aerodynamic effects of forward blade skew in axial flow rotors of controlled vortex
design
Lu, S-M Effect of channel step-depth on the performance of proton exchange membrane fuel
cells
Lu, X Numerical investigations of the flow mechanisms in a subsonic compressor rotor with
axial-skewed slot
Lunt, P Self-starting capability of a Darrieus turbine
Luo, C L Numerical study of the use of photovoltaic-Trombe wall in residential buildings in
Tibet
Lutum, E Advanced evaluation of transient heat transfer experiments using thermochromic
liquid crystals
Madhwani, S Use of fuchsine basic: ethylenediaminetetraacetic acid system in photogalvanic cell
for solar energy conversion
Mago, PJ Methodology to performa non-conventional evaluation of cooling, heating, and
power systems
Mago, PJ Performance analysis of different working fluids for use in organic Rankine cycles
Malte, P C NO, formation pathways in lean-premixed-prevapourized combustion of fuels with
carbon-to-hydrogen ratio between 0.25 and 0.88
Manzanares-Filho, N Conceptual optimization of axial-flow hydraulic turbines with non-free vortex design
Marongiu, J C Numerical simulation of the flow in a Pelton turbine using the meshless method
smoothed particle hydrodynamics: a new simple solid boundary treatment
Martelli, F Analysis of the shroud leakage flow and mainflow interactions in high-pressure
turbines using an unsteady computational fluid dynamics approach
Maramisaran, M Transient theoretical analysis of a multi-layered type of heat exchanger using porous
media
Proc. IMechE Vol. 221 Part A: J. Power and Ex:ergy © IMechE 2007
Author Index 2007
Martelli, F Influence of external geometrical modifications on the flow behaviour of a rotor-stator
system: numerical and experimental investigation
Martinez-Botas, R F Effect of volute geometry on the steady and unsteady performance of mixed-flow
turbines
Masjuki, H H Effect of partial substitution of diesel fuel by natural gas on performance parameters
of a four-cylinder diesel engine
Massardo, A F Early start-up of solid oxide fuel cell hybrid systems with ejector cathodic recirculation:
experimental results and model verification
McCabe, A P Time series analysis-based adaptive tuning techniques for a heaving wave energy
converter in irregular seas
McGregor, P G Impact of alternative electricity generation technologies on the Scottish economy: an
illustrative input-output analysis
Meakhail, T Numerical and experimental study of the influence of drag reduction agent (carboxy
methyl cellulose) on the central jet pump performance
Melville, G Tidal current resource assessment
Mikhail, S Numerical and experimental study of the influence of drag reduction agent (carboxy
methyl cellulose) on the central jet pump performance
Misa, T Thermodynamic analysis of an in-situ cogeneration plant
Moeck, J P Time domain modelling and stability analysis of complex thermoacoustic systems
Mohamad, AA Investigation of liquid fuel combustion in a cross-flow burner
Mohan, M Real-time commercial availability index of a steam power plant: graph theory and
matrix method
Morris, A Optical strain monitoring techniques for life assessment of components in power
generation plant
Moutusni, T Z Effect of partial substitution of diesel fuel by natural gas on performance parameters
of a four-cylinder diesel engine
Miihlbauer, K In-engine turbine heat transfer measurement
Muneer, T An investigation into micro wind energy systems for their utilization in urban areas and
their life cycle assessment
Nie, S L Reaction thrust of submerged water jets
Nilsson, K Direct electric energy conversion system for energy conversion from marine currents
Oh, HW Application of computational fluid dynamics to performance analysis of a Francis
hydraulic turbine
Oka, SN Computational fluid dynamics technique as a tool for description of the phenomena
occurring in pulverized coal combustion systems
Oliveira, W Conceptual optimization of axial-flow hydraulic turbines with non-free vortex design
Owen, A Tidal current resource assessment
Ozgener, L Exergoeconomic analysis of small industrial pasta drying systems
Ozkaymak, M Theoretical and experimental investigation of a hot box-type solar cooker performance
Ozkol, I Entropy generation in laminar natural convection from a constant temperature vertical
plate in an infinite fluid
Paniagua, G Performance analysis of a transonic high-pressure turbine
Papadimitriou, DI Total pressure loss minimization in turbomachinery cascades using a new continuous
adjoint formulation
Park, I Scroll expander for power generation from a low-grade steam source
Parker, RP M Energy and carbon audit of an offshore wave energy converter
Parkinson, E Numerical simulation of the flow in a Pelton turbine using the meshless method
smoothed particle hydrodynamics: a new simple solid boundary treatment
Pascenti, M Early start-up of solid oxide fuel cell hybrid systems with ejector cathodic recirculation:
experimental results and model verification
Paschereit, C O Time domain modelling and stability analysis of complex thermoacoustic systems
Payne, GS Efficiency and dynamic performance of Digital Displacement™ hydraulic transmission
in tidal current energy converters
Pei, G Numerical study of the use of photovoltaic-Trombe wall in residential buildings in Tibet
Peterson, RB Reciprocating thermocompressor performance with non-ideal component character-
istics
Petrovski, I J Computational fluid dynamics technique as a tool for description of the phenomena
occurring in pulverized coal combustion systems
Pham, X P Investigation into wave—current interactions in marine current turbines
Poser, R Advanced evaluation of transient heat transfer experiments using thermochromic
liquid crystals
Prasad, MVSSSM Experimental studies on the effect of impeller width on centrifugal compressor stage
performance with low solidity vaned diffusers
Punjabi, P B Use of fuchsine basic: ethylenediaminetetraacetic acid system in photogalvanic cell for
solar energy conversion
Qin, X Model of real absorption heat pump cycle with a generalized heat transfer law and its
performance
© IMechE 2007 Proc. IMechE Vol. 221 Part A: J. Power and Energy
Author Index 2007
Régert, T Aerodynamic effects of forward blade skew in axial flow rotors of controlled vortex
design
Rahim, A Liner dome shape effect on the annulus flow characteristics with and without
swirl for a can-combustor model
RamanaMurty, GV Experimental studies on the effect of impeller width on centrifugal compressor
stage performance with low solidity vaned diffusers
Rampen,WHS Efficiency and dynamic performance of Digital Displacement™ hydraulic trans-
mission in tidal current energy converters
Reddy, BV Parametric simulation of steam injected gas turbine combined cycle
Reddy, DN Experimental studies on the effect of impeller width on centrifugal compressor
stage performance with low solidity vaned diffusers
Rey, R Numerical and experimental study of unsteady flow in a centrifugal fan
Rha, P C Scroll expander for power generation from a low-grade steam source
Rispoli, F Development of improved blade tip endplate concepts for low-noise operation
in industrial fans
Rose, MG In-engine turbine heat transfer measurement
Rutar, T NO, formation pathways in lean-premixed-prevapourized combustion of fuels
with carbon-to-hydrogen ratio between 0.25 and 0.88
Sadiq Al-Baghdadi, MAR Numerical analysis of a proton exchange membrane fuel cell. Part 1: model
development
Sadiq Al-Baghdadi, MAR Numerical analysis of a proton exchange membrane fuel cell. Part 2: parametric
study
Sadiq Al-Baghdadi, MAR Prediction of hygro-thermal stress distribution in proton exchange mem-
branes using a three-dimensional multi-phase computational fluid dynamics
model
Saha, A Contributions of self-absorption and soot on radiation heat transfer in a laminar
methane-air diffusion flame
Sahin, B Optimization of a regenerative gas-turbine cogeneration system based on a new
exergetic performance criterion: exergetic performance coefficient
Saidur, R Effect of partial substitution of diesel fuel by natural gas on performance
parameters of a four-cylinder diesel engine
Saleh, A Evaporative system for water and beverage refrigeration in hot countries
Salter, SH Vertical-axis tidal-current generators and the Pentland Firth
Sampson, R An experimental investigation on cavitation, noise, and slipstream characteristics
of ocean stream turbines
Samsher Comparison between loss coefficients of smooth, smooth-thickened, and rough-
thickened axial turbine blades
Samsher Effects of localized roughness over reaction and impulse blades on loss coefficient
Sarkar, S Effects of passing wakes on a separating boundary layer along a low-pressure
turbine blade through large-eddy simulation
Satta, F Velocity and turbulence measurements in a separating boundary layer with and
without passive flow control
Sauls, J Investigation on the oil supply system of a scroll compressor
Shahad Al-Janabi, HA K Numerical analysis of a proton exchange membrane fuel cell. Part 1: model
development
Shahad Al-Janabi, H AK Numerical analysis of a proton exchange membrane fuel cell. Part 2: parametric
study
Shahad Al-Janabi, H AK Prediction of hygro-thermal stress distribution in proton exchange membranes
using a three-dimensional multi-phase computational fluid dynamics model
Sharma, V K Use of fuchsine basic: ethylenediaminetetraacetic acid system in photogalvanic
cell for solar energy conversion
Sheard, AG Development of improved blade tip endplate concepts for low-noise operation
in industrial fans
Short, T D The performance of a new positive displacement pump targeted to improve rural
water supplies
Shu, P Research on oil-free hermetic refrigeration scroll compressor
Sigg, R
Predictions of non-equilibrium phase transition in a model low-pressure steam
turbine
Sijercic, MA Computational fluid dynamics technique as a tool for description of the
phenomena occurring in pulverized coal combustion systems
Simmons, K Modelling windage power loss from an enclosed spur gear
Simoni, D Velocity and turbulence measurements in a separating boundary layer with and
without passive flow control
Singh, S N Liner dome shape effect on the annulus flow characteristics with and without
swirl for a can-combustor model
Sirousazar, M Performance analysis of the ejector-vapour compression refrigeration cycle 1089
Sitaram, N Computational study of the effect of sweep on the performance and flow field in 315
an axial flow compressor rotor
Proc. IMechE Vol. 221 Part A: J. Power and Energy © IMechE 2007
Author Index 2007
Siva Reddy, T Ch Experimental studies on the effect of impeller width on centrifugal compressor
stage performance with low solidity vaned diffusers
Sjédahl, M Optical strain monitoring techniques for life assessment of components in
power generation plant
Somayaji, C Performance analysis of different working fluids for use in organic Rankine
cycles
Spano, E Velocity and turbulence measurements in a separating boundary layer with
and without passive flow control
Srinivas, T Parametric simulation of steam injected gas turbine combined cycle
Stallard, T J Time series analysis-based adaptive tuning techniques for a heaving wave
energy converter in irregular seas
Su, A Effect of channel step-depth on the performance of proton exchange mem-
brane fuel cells
Su, C-C Effect of volute geometry on the steady and unsteady performance of mixed-
flow turbines
Su, Y-F Exergy destruction minimization of an irreversible Carnot refrigeration cycle
Sun, F Model of real absorption heat pump cycle with a generalized heat transfer law
and its performance
Sutherland, G Tidal current energy assessment for Johnstone Strait, Vancouver Island
Siirken, N Predictions of non-equilibrium phase transition in a model low-pressure
steam turbine
Swales, J K Impact of alternative electricity generation technologies on the Scottish
economy: an illustrative input-output analysis
Taylor, J RM Vertical-axis tidal-current generators and the Pentland Firth
Teixeira, JA Recirculation casing treatment by using a vaned passage for a transonic axial-
flow compressor
Thévenin, D Reducing the CO emissions in a laminar burner using different numerical
optimization methods
Toffolo, A Innovative procedure to minimize multi-row compressor blade dynamic
loading using rotor-stator interaction optimization
Tousi, AM Recirculation casing treatment by using a vaned passage for a transonic axial-
flow compressor
Traverso, A Early start-up of solid oxide fuel cell hybrid systems with ejector cathodic
recirculation: experimental results and model verification
Tu, CH Effect of channel step-depth on the performance of proton exchange mem-
brane fuel cells
Turner, K Impact of alternative electricity generation technologies on the Scottish
economy: an illustrative input-output analysis
Ubaldi, M Velocity and turbulence measurements in a separating boundary layer with
and without passive flow control
Ust, Y Optimization of a regenerative gas-turbine cogeneration system based on a
new exergetic performance criterion: exergetic performance coefficient
Vad, J Aerodynamic effects of forward blade skew in axial flow rotors of controlled
vortex design
Van den Braembussche, RA A comparison of conjugate heat transfer methods applied to an axial helium
turbine
Vardia, J Use of fuchsine basic: ethylenediaminetetraacetic acid system in photogal-
vanic cell for solar energy conversion
Varyani, KS Investigation into wave-current interactions in marine current turbines
Veeravalli, SV Liner dome shape effect on the annulus flow characteristics with and without
swirl for a can-combustor model
Verstraete, T A comparison of conjugate heat transfer methods applied to an axial helium
turbine
Volker, L Predictions of non-equilibrium phase transition in a model low-pressure
steam turbine
von Backstrém, TW Fundamentals of four-quadrant axial flow compressor maps
von Wolfersdorf, J Advanced evaluation of transient heat transfer experiments using ther-
mochromic liquid crystals
Wade, NS The performance of a new positive displacement pump targeted to improve
rural water supplies
Wallace, AR Efficiency and dynamic performance of Digital Displacement™ hydraulic
transmission in tidal current energy converters
Wang, B Structure of reaction zone of normal temperature air flameless combustion in
a 2 ton/h coal-fired boiler furnace
Wang, D An experimental investigation on cavitation, noise, and slipstream character-
istics of ocean stream turbines
Wang, J Characteristics of linear compressors under current source excitation 1057
Wang, L Research on oil-free hermetic refrigeration scroll compressor 1049
© IMechE 2007 Proc. IMechE Vol. 221 Part A: J. Power and Energy
Author Index 2007
Weng, F-B Effect of channel step-depth on the performance of proton exchange membrane fuel cells
Wu, CH Finite element method-based three-dimensional frictional contact analysis of tur-
bocharger compressor
Wu, Y Behaviour of tip-leakage flow in an axial flow compressor rotor
Xing, X Structure of reaction zone of normal temperature air flameless combustion in a 2 ton/h
coal-fired boiler furnace
Yamamoto, T A novel high-performance low-NO, fuel-rich/fuel-lean two-stage combustion gas and
steam turbine system for power and heat generation
Yang, YS Reaction thrust of submerged water jets
Yari, M Performance analysis of the ejector-vapour compression refrigeration cycle
Yasa, T Performance analysis of a transonic high-pressure turbine
Yavuz, H Time series analysis-based adaptive tuning techniques for a heaving wave energy
converter in irregular seas
Yi, H Numerical study of the use of photovoltaic-Trombe wall in residential buildings in Tibet
Yilbas, BS Entropy generation in a rotating channel
Yilmaz, T Optimization of a regenerative gas-turbine cogeneration system based on a new exergetic
performance criterion: exergetic performance coefficient
Yilmaz, T Performance optimization ofa Joule-Brayton engine based on the efficient power criterion
Yin, J Effects of shape factors on flow and heat transfer in corrugated—undulated channels with
sinusoidal waves
Yoon, ES Application of computational fluid dynamics to performance analysis of a Francis
hydraulic turbine
Younsi, M Numerical and experimental study of unsteady flow in a centrifugal fan
Zhang, H W Finite element method-based three-dimensional frictional contact analysis of tur-
bocharger compressor
Zhang, Zh Experimental studies of the jet of a Pelton turbine
Zhang, Zh Flow friction theorem of Pelton turbine hydraulics
Zhang, Zh Flow interactions in Pelton turbines and the hydraulic efficiency of the turbine system
Zhao, Y Numerical simulations of stall inside a centrifugal compressor
Zhao, Y Research on oil-free hermetic refrigeration scroll compressor
Zhou, S Experimental and numerical investigation of interaction between turbine stage and
exhaust hood
Zhu, J Numerical investigations of the flow mechanisms in a subsonic compressor rotor with
axial-skewed slot
Zhu, X-C Numerical simulations of stall inside a centrifugal compressor
Zhu, YQ Reaction thrust of submerged water jets
Zunino, P Velocity and turbulence measurements in a separating boundary layer with and without
passive flow control
Proc. IMechE Vol. 221 Part A: J. Power and Energy © IMechE 2007
4