Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 2004: Vol 218 Index

2004·1.6 MB·English

Author Index
Abas, F. Prediction of the thermal performance of solar air heaters by Internet-based mathematical
simulation
Adam, N. M. Prediction of the thermal performance of solar air heaters by Internet-based mathematical
simulation
Agnew, B. Examination of the performance envelope of combine Rankine, Brayton and two parallel inverse
Brayton cycles
Agrawal, V. P. Maintenance strategy for a coal-based steam power plant equipment: a graph theoretic approach
Akpinar, E. K. Statistical analysis of wind energy potential on the basis of the Weibull and Rayleigh distributions
for Agin-Elazig, Turkey
Akpinar, S. Statistical analysis of wind energy potential on the basis of the Weibull and Rayleigh distributions
for Agin-Elazig, Turkey
Alabdoadaim, M. A. Examination of the performance envelope of combine Rankine, Brayton and two parallel inverse
Brayton cycles
Alaktiwi, A. Examination of the performance envelope of combine Rankine, Brayton and two parallel inverse
Brayton cycles
Alam, M. Performance of NOx reduction catalysts with simulated dimethyl ether diesel engine exhaust gas 89-95
Al-Hamdan, Q. Z. Optimization techniques for designing an inward flow radial turbine rotor 655—668
Angelino, G. Ejector-assisted liquid metal topping cycles 111-121
Audus, H. Gas turbine engine configurations for power generation cycles having CO, sequestration I-13
Barbosa, J. R. Methodology for gas turbine performance improvement using variable-geometry compressors 541-549
and turbines
Barnes, D. An investigation into the flow within inclined rotating orifices and the influence of incidence
angle on the discharge coefficient
Bashria, A. A. Prediction of the thermal performance of solar air heaters by Internet-based mathematical
simulation
Bassily, A. M. Modelling and numerical optimization of dual- and triple-pressure combined cycles
Benito, D. Recent developments in gas turbine component temperature prediction methods, using
computational fluid dynamics and optimization tools, in conjunction with more conventional
finite element analysis techniques
Blanco, E. Performance ofa centrifugal pump running in inverse mode
Bringhenti, C. Methodology for gas turbine performance improvement using variable-geometry compressors
and turbines
Bruno, J. C. Stand-alone and grid-connected performance analysis of a regenerative micro gas turbine
cogeneration plant
Bryden, I. Choosing and evaluating sites for tidal current development
Carapellucci, R. Carbon dioxide removal via a membrane system in a natural gas combined-cycle plant 219 229
Carelli, M. D. Modular integral water reactors: the ultimate in safety and simplicity 293-307
Chittajallu, K. M Model-based control strategies in the dynamic interaction of air supply and fuel cell 487-499
Cho, S.-Y. Experimental study of the incidence effect on rotating turbine blades 669-676
Choi, S. Unsteady one-dimensional model for a bed combustion of solid fuels 589-598
Choi, S.-K. Experimental study of the incidence effect on rotating turbine blades 669-676
Cooke, A. Detection of shaft-seal rubbing in large-scale power generation turbines with acoustic emissions 8]
Case Study
Coronas, A. Stand-alone and grid-connected performance analysis of a regenerative micro gas turbine
cogeneration plant
Corsini, A. Using sweep to extend the stall-free operational range in axial fan rotors
Crane, R. I. Scope for reductions in the cost of CO, capture using flue gas scrubbing with amine solvents
Crane, R. I. Preliminary assessment of electricity costs for existing pulverized fuel plant retrofitted with an
advanced supercritical boiler and turbine and solvent CO, capture
Crump, M. W. Modular integral water reactors: the ultimate in safety and simplicity
Darkwa, K. Heat transfer in neuron composite laminated phase-change drywall
Daud, M. Prediction of the thermal performance of solar air heaters by Internet-based mathematical
simulation
De, S. First and second law performance variations of a coal gasification fuel-cell-based combined
cogeneration plant with varying load
Dewan, A. Review of passive heat transfer augmentation techniques
© IMechE 2004 Proc. Instn Mech. Engrs Vol. 218 Part A: J Power and Energy
690 AUTHOR INDEX
Dincer, I. Exergetic analysis of cogeneration-based district energy systems
Dixon, J. A. Recent developments in gas turbine component temperature prediction methods, using
computational fluid dynamics and optimization tools, in conjunction with more conventional
finite element analysis techniques
do Nascimento, M. A. R. Performance evaluation and case studies of microturbines fuelled with natural gas and diesel 599-607
Dyer, J. R. Progress in permanent geologic disposal of spent nuclear fuel and high-level radioactive waste in 319-334
the United States
EbaiM.d S,. Y . Optimization techniques for designing an inward fiow radial turbine rotor
Elder, R.. L. Experimental investigation of axial fan erosion and performance degradation
Fernandez, J. Performance of a centrifugal pump running in inverse mode
Franklin, K. C. ‘Fit for purpose’ nuclear energy
Fujita, O. Performance of NOx reduction catalysts with simulated dimethyl ether diesel engine exhaust gas
Gandhi, O. P. Maintenance strategy for a coal-based steam power plant equipment: a graph theoretic approach 619-636
Gandjalikhan Nassab, S. A. Effective gas-to-gas heat exchanger by means of energy conversion between gas enthalpy and 451-457
thermal radiation
Ghenaiet, A. Experimental investigation of axial fan erosion and performance degradation 450
Ghosh, S. First and second law performance variations of a coal gasification fuel-cell-based combined 485
cogeneration plant with varying load
Gibbins, J. R. Scope for reductions in the cost of CO, capture using flue gas scrubbing with amine solvents
Gibbins, J. R. Preliminary assessment of electricity costs for existing pulverized fuel plant retrofitted with an
advanced supercritical boiler and turbine and solvent CO, capture
Gomes, F. E. B. Performance evaluation and case studies of microturbines fuelled with natural gas and diesel 599-607
Govardhan, M. Effect of diffuser vane height and position on the performance of centrifugal compressor 647-654
Grujicic, M. Model-based control strategies in the dynamic interaction of air supply and fuel cell 487-499
Habeebullah, B. A. Exergy analysis of carryover leakage irreversibilities of a power plant regenerative air heater 23-32
Habeebullah. A. S. Exergy analysis of carryover leakage irreversibilities of a power plant regenerative air heater 23-32
Haslam, A. Performance evaluation and case studies of microturbines fuelled with natural gas and diesel 599-607
Hewitt, G. Detection of shaft-seal rubbing in large-scale power generation turbines with acoustic emissions. 71-81
Case Study
Huang, Rotordynamic characteristics of a rotor with labyrinth gas seals. Part 1: comparison with Child’s Ws Soi
experiments
Huang, Rotordynamic characteristics of a rotor with labyrinth gas seals. Part 2: a non-linear model 179-185
Huang, Rotordynamic characteristics of a rotor with labyrinth gas seals. Part 3: coupled fluid-solid 187-197
vibration
Idris, A. An investigation into the flow within inclined rotating orifices and the influence of incidence
angle on the discharge coefficient
Invernizzi, C. Ejector-assisted liquid metal topping cycles 111-121
lon, S. E. ‘Fit for purpose’ nuclear energy 283-291
Ishizuka, M. Numerical and experimental study of the effect of inclination on the thermal behaviour of natural 501-508
convection inside a thin electronic equipment casing
IssaJc., M . Effect of diffuser vane height and position on the performance of centrifugal compressor 647-654
Ito, K. Performance of NOx reduction catalysts with simulated dimethyl ether diesel engine exhaust gas 89-95
Iwamura, T. RAPID-L and RAPID operator-free fast reactors combined with a thermoelectric power 335-343
conversion system
Jackson, Au. B. Gas turbine engine configurations for power generation cycles having CO, sequestration 3
Jassim, R. K. Exergy analysis of carryover leakage irreversibilities of a power plant regenerative air heater 2
43
Kambe, M. RAPID-L and RAPID operator-free fast reactors combined with a thermoelectric power 3
conversion system
Kamboukos, Ph. Gas turbine component fault detection from a limited number of measurements 618
Karl, A. Recent developments in gas turbine component temperature prediction methods, using 255
computational fluid dynamics and optimization tools, in conjunction with more conventional
finite element analysis techniques
Kim, J. S. Heat transfer in neuron composite laminated phase-change drywall 83-88
Kim, H.-J. Large eddy simulation of unsteady flows in turbomachinery 463-475
Kitamura, Y. Numerical and experimental study of the effect of inclination on the thermal behaviour of natural 501-508
convection inside a thin electronic equipment casing
Koster, A. Pebble-bed modular reactor: a generation IV high-temperature gas-cooled reactor 309-318
Kumar, P. S. Review of passive heat transfer augmentation techniques 509-527
Kyle, C. R. Aerodynamics of human-powered vehicles 141-154
Lahey, R. T. Evidence for nuclear emissions during acoustic cavitation revisited 345-364
Law, E. H. Model-based control strategies in the dynamic interaction of air supply and fuel cell 487-499
Lazzaretto, A. Cross-flow fan design guidelines for multi-objective performance optimization 33-42
Le, M. N. Exergetic analysis of cogeneration-based district energy systems 369-375
Proc. Instn Mech. Engrs Vol. 218 Part A: J Power and Energy ‘ IMechE 2004
AUTHOR INDEX
Lee, S. Large eddy simulation of unsteady flows in turbomachinery
Bex. Rotordynamic characteristics of a rotor with labyrinth gas seals. Part 1: comparison with Child’s
experiments
Li, X. Rotordynamic characteristics of a rotor with labryrinth bas seals. Part 2: a non-linear model
Li; .X. Rotordynamic characteristics of a rotor with labyrinth gas seals. Part 3: coupled fluid-solid
vibration
Li; L. Research on the reliability of a scroll compressor in a heat pump system
Lipej, A. Optimization method for the design of axial hydraulic turbines
Liu, R. Numerical investigation of a high-speed centrifugal compressor with hub vane diffusers l
Lora, E. E. S. Performance evaluation and case studies of microturbines fuelled with natural gas and diesel 599-607
Mahanta, P. Review of passive heat transfer augmentation techniques
Martegani, A. D. Cross-flow fan design guidelines for multi-objective performance optimization
Massagues, L. I. Stand-alone and grid-connected performance analysis of a regenerative micro gas turbine
cogeneration plant
Mathioudakis, K. Gas turbine component fault detection from a limited number of measurements 609.
Matzie, R. A. Modular integral water reactors: the ultimate in safety and simplicity
Matzie, R. Pebble-bed modular reactor: a generation IV high-temperature gas-cooled reactor
Matzner, D. Pebble-bed modular reactor: a generation IV high-temperature gas-cooled reactor
Mba, D. Detection of shaft-seal rubbing in large-scale power generation turbines with acoustic emissions.
Case Study
Megat, H. M. Prediction of the thermal performance of solar air heaters by Internet-based mathematical
simulation
Melville, G. T. Choosing and evaluating sites for tidal current development 567
Milazzo, A. Carbon dioxide removal via a membrane system in a natural gas combined-cycle plant 219
Mohan, M. Maintenance strategy for a coal-based steam power plant equipment: a graph theoretic approach 619
Mukkavilli, P. Effect of the setting angle of a low-solidity vaned diffuser on the performance of a centrifugal o£S2 79
compressor stage
Mukunda, H. S. Simulation of fluid flow in a high compression ratio reciprocating internal combustion engine 403
Nakagawa, S. Numerical and experimental study of the effect of inclination on the thermal behaviour of natural
convection inside a thin electronic equipment casing
Nakajima, K. RAPID-L and RAPID operator-free fast reactors combined with a thermoelectric power
conversion system
Nathan, G. J. Implications on flame stabilization in a precessing jet flame from near field velocity
measurements
Newborough, M. Assessing the benefits of impiementing micro-CHP systems in the UK
Nigmatulin, R. I. Evidence for nuclear emissions during acoustic cavitation revisited
O’ Doherty, T. Implications on flame stabilization in a precessing jet flame from near field velocity
measurements
Omar H, Prediction of the thermal performance of solar air heaters by Internet-based mathematical
simulation
Parrondo, J. Performance of a centrifugal pump running in inverse mode
Paul, P. J. Simulation of fluid flow in a high compression ratio reciprocating internal combustion engine
Peng, X. Simulation of discharge pressure pulsation within twin screw compressors
Peters, M. T. Progress in permanent geologic disposal of spent nuclear fuel and high-level radioactive waste in
the United States
Pilidis, P. Performance evaluation and case studies of microturbines fuelled with natural gas and diesel
Pukrushpan, J. T. Model-based control strategies in the dynamic interaction of air supply and fuel cell
Pullen, K. An investigation into the flow within inclined rotating orifices and the influence of incidence
angle on the discharge coefficient
Raju, K. S. Review of passive heat transfer augmentation techniques 509-127
Ramana Murty, G. V. Effect of the setting angle of a low-solidity vaned diffuser on the performance of a centrifugal 637-146
compressor stage
Reddy, D. N. Effect of the setting angle of a low-solidity vaned diffuser on the performance of a centrifugal 637-146
compressor stage
Rippon, S. E. Where next for nuclear power? 277-191
Rispoli, F. Using sweep to extend the stall-free operational range in axial fan rotors 129-139
Roby, D. Detection of shaft-seal rubbing in large-scale power generation turbines with acoustic emissions.
Case Study
Rose, M. G. Low flowrate effects in a centrifugal pump impeller
Rosen, M. A. Exergetic analysis of cogeneration-based district energy systems
Runchal, A. Large eddy simulation of unsteady flows in turbomachinery
Ryu, C. Unsteady one-dimensional model for a bed combustion of solid fuels
© IMechE 2002 Proc. Instn Mech. Engrs Vol. 218 Part A: J Power and Energy
692 AUTHOR INDEX
Sapuan, S. M. Prediction of the thermal performance of solar air heaters by Internet-based mathematical 579 187
simulation
Sarabchi. K. Performance evaluation of reheat gas turbine cycles 529 139
Scanlon, T. J. Performance of a centrifugal pump running in inverse mode 265 171
Schneider, G. M. Implications on flame stabilization in a precessirg jet flame from near field velocity 677 187
measurements
Shen, J. Research on the reliability of a scroll compressor in a heat pump system 429 135
Shu, P. Simulation of discharge pressure pulsation within twin screw compressors 257 164
429-
Shu, P. Research on the reliability of a scroll compressor in a heat pump system 135
1-13
Singh, R. Gas turbine engine configurations for power generation cycles having CO, sequestration
Sitaram, N. Effect of diffuser vane height and position on the performance of centrifugal compressor 647 154
Siva Reddy, T. C. Effect of the setting angle of a low-solidity vaned diffuser on the performance of a centrifugal 637 146
compressor stage
Sridhar, G. Simulation of fluid flow in a high compression ratio reciprocating internal combustion engine 405 116
Stamatis, A. Gas turbine component fault detection from a limited number of measurements 609 118
Stickland, M. T. Performance of a centrifugal pump running in inverse mode 265 171
Taleyarkhan, R. P. Evidence for nuclear emissions during acoustic cavitation revisited 345 164
dan, 8: 'C. Experimental investigation of axial fan erosion and performance degradation 437 150
Tham, K. M. Recent developments in gas turbine component temperature prediction methods, using 241 155
computational fluid dynamics and optimization tools, in conjunction with more conventional
finite element analysis techniques
Toffolo, A. Cross-flow fan design guidelines for multi-objective performance optimization
Tsunoda, H. RAPID-L and RAPID operator-free fast reactors combined with a thermoelectric power
conversion system
Verdicchio, J. A. Recent developments in gas turbine component temperature prediction methods, using
computational fluid dynamics and optimization tools, in conjunction with more conventional
finite element analysis techniques
Warner, N. A. Liquid metal systems for gasification-based power generation 387 101
Wattananusorn, S. Interference of laminar flow on displacement thickness in a streamwise corner 51 13
Weaver, M. D. Aerodynamics of human-powered vehicles 141 154
Wu, H. Simulation of discharge pressure pulsation within twin screw compressors 257 164
Wu, H. Research on the reliability of a scroll compressor in a heat pump system 429 135
Xing, Z. Simulation of discharge pressure pulsation within twin screw compressors 257 164
AU, Z. Numerical investigation of a high-speed centrifugal compressor with hub vane diffusers ESS 169
Yang, W. Unsteady one-dimensional model for a bed combustion of solid fuels 589- 198
Zhao, Y. Research on the reliability of a scroll compressor in a heat pump system 429 135
Proc. Instn Mech. Engrs Vol. 218 Part A: J Power and Energy ( IMechE 2004