Proceedings of the 9th IFToMM International Conference on Rotor Dynamics

2214 Pages·2015·102.201 MB·English

by  Paolo Pennacchi (eds.)

Mechanisms and Machine Science 21
Paolo Pennacchi Editor
Proceedings of
the 9th IFToMM
International
Conference on Rotor
Dynamics
Mechanisms and Machine Science
Volume 21
Series editor
Marco Ceccarelli, Cassino, Italy
More information about this series at http://www.springer.com/series/8779
Paolo Pennacchi
Editor
Proceedings of the 9th
IFToMM International
Conference on Rotor
Dynamics
123
Editor
PaoloPennacchi
Department of Mechanical Engineering
Politecnico diMilano
Milan
Italy
ISSN 2211-0984 ISSN 2211-0992 (electronic)
Mechanisms and Machine Science
ISBN 978-3-319-06589-2 ISBN 978-3-319-06590-8 (eBook)
DOI 10.1007/978-3-319-06590-8
LibraryofCongressControlNumber:2015936366
SpringerChamHeidelbergNewYorkDordrechtLondon
©SpringerInternationalPublishingSwitzerland2015
Thisworkissubjecttocopyright.AllrightsarereservedbythePublisher,whetherthewholeorpart
of the material is concerned, specifically the rights of translation, reprinting, reuse of illustrations,
recitation, broadcasting, reproduction on microfilms or in any other physical way, and transmission
or information storage and retrieval, electronic adaptation, computer software, or by similar or
dissimilarmethodologynowknownorhereafterdeveloped.
The use of general descriptive names, registered names, trademarks, service marks, etc. in this
publicationdoesnotimply,evenintheabsenceofaspecificstatement,thatsuchnamesareexempt
fromtherelevantprotectivelawsandregulationsandthereforefreeforgeneraluse.
Thepublisher,theauthorsandtheeditorsaresafetoassumethattheadviceandinformationinthis
book are believed to be true and accurate at the date of publication. Neither the publisher nor the
authors or the editors give a warranty, express or implied, with respect to the material contained
hereinorforanyerrorsoromissionsthatmayhavebeenmade.
Printedonacid-freepaper
SpringerInternationalPublishingAGSwitzerlandispartofSpringerScience+BusinessMedia
(www.springer.com)
Preface
TheInternationalFederationforthePromotionofMechanismandMachineScience
(IFToMM) aims at promoting research and development in the field of machines
andmechanismsbytheoreticalandexperimentalmethods,alongwiththeirpractical
application.
IFToMM’svisionevolvedsince itsfoundationin1969: atthetime, it consisted
of initiating and facilitating international collaboration between Eastern and
Western countries. Today, it has evolved in assisting and enhancing international
collaboration and in disseminating modern results on mechanism and machine
science. Tomorrow, IFToMM will provide leadership for cooperation and devel-
opment in mechanism and machine science.
IFToMM has 12 technical committees, among which that on rotordynamics is
one of the most active. Since 1982, every 4 years, the rotordynamics technical
committee has been organizing a world conference, which over the years has
become an irreplaceable point of reference for the academic world and industry.
The first eight editions were held in Rome, Tokyo, Lyon, Chicago, Darmstadt,
Sydney, Vienna, and Seoul.
After 32 years, for the ninth edition, the IFToMM International Conference on
RotorDynamicsisreturningtoItaly,thecountrywhereitmadeitsdebut.Sincethat
first meeting in Rome, much has changed in the rotor dynamics field. Great pro-
gress hasbeen made inmodeling rotor machines:theresultswe canachievetoday
from calculation models are very close to those obtained through experimental
practice. Rotordynamics is more and more connected with our day-to-day living,
with the new needs and challenges characterizing modern living: from energy
production to the transportation sector and industry, to the reliability of the tech-
nological devices we use everyday. Due to the importance of the application of
rotordynamics in industry, and in order to promote the comparison and discussion
ofideas,needs,andexperiencescomingfromindustryandtheacademicworld,the
conference proceedings introduced in this book will feature the presence of two
organizing committees: a scientific committee and an industrial committee.
The papers collected in these proceedings cover a wide range of topics, that is:
balancing, blade dynamics, case histories, cracks in rotating shafts, diagnostics,
v
vi Preface
electromechanical interaction, fault identification, gas foil bearings, geared
machines,magneticbearings,modelingandcontrol,rollingelementbearings,rub—
rotor to stator contact, seals, stability, supporting structure effects, and thermal
effects.
Agrandtotalof198papershavebeenselectedafterpeerreviewingand187are
includedintheseproceedings.Actually,thisfigurerepresentsarecordwithrespect
to previous editions of the conference and it is a further confirmation of the up-to-
datenessandvivacityofrotordynamics.Moreover,theseproceedingsrepresentnot
onlythestateoftheartbutalsoaforesightonthevarioustopicsofrotordynamics,
which allows forecasting technical future developments in this technical field.
As the chairman of the conference, I am proud of the results obtained and I
would like to share them with the friends and colleagues of Politecnico di Milano,
whohelpedme(StevenChatterton,AndreaVania,NicolòBachschmid,andPhouc
Vinh Dang). Last but not least, I gratefully acknowledge the sponsors of the con-
ference (SKF, Danieli, Eurobearings, IfTA, Boldrocchi, Turboden and Siemens)
and those who cooperated with us (IFToMM, MUSP, GE—Measurement and
Control, EDF, National Instruments and Fondazione Politecnico di Milano).
Paolo Pennacchi
Committee
Scientific Committee
Jan-Olov Aidanpää, Luleå University of Technology (SWE)
Nicolò Bachschmid, Politecnico di Milano (ITA)
Alberto Berizzi, Politecnico di Milano (ITA)
Miha Boltežar, Univerza v Ljubljani (SVN)
Sanjin Braut, Sveučilište u Rijeci Tehnički Fakultet (HRV)
Izhak Bucher, Technion-Israel Institute of Technology (ISR)
Katia Cavalca Lucchesi, UNICAMP—Universidade Estadual de Campinas (BRA)
Merab Chelidze, Georgian Technical University (GEO)
Mnaouar Chouchane, Ecole Nationale d’Ingénieurs de Monastir (TUN)
Fulei Chu, Tsinghua University (CHN)
Giorgio Dalpiaz, Università degli Studi di Ferrara (ITA)
Sergio E. Diaz, Universidad Simón Bolívar (VEN)
Régis Dufour, INSA de Lyon (FRA)
Horst Ecker, Technische Universität Wien (AUT)
Eduard Egusquiza, UPC—Universitat Politècnica de Catalunya (ESP)
Aly El-Shafei, Cairo University (EGY)
David J. Ewins, University of Bristol (GBR)
Alfonso Fernández del Rincón, Universidad de Cantabria (ESP)
Ilmar Ferreira Santos, DTU—Danmarks Tekniske Universitet (DNK)
Laszlo Forrai, Miskolci Egyetem (HUN)
Paola Forte, Università degli Studi di Pisa (ITA)
Hiroyuki Fujiwara, National Defence Academy (JPN)
Paolo Gaetani, Politecnico di Milano (ITA)
Seamus Garvey, University of Nottingham (GBR)
Alain Gelin, Total S.A. (FRA)
Giancarlo Genta, Politecnico di Torino (ITA)
Julio Cesar Gómez Mancilla, SEPI-ESIME-IPN (MEX)
K. Gupta, Indian Institute of Technology (IND)
vii
viii Committee
Eric Hahn, The University of New South Wales (AUS)
Timo P. Holopainen, ABB Ltd (FIN)
Tsuyoshi Inoue, Nagoya University (JPN)
Ashok Kaushal, Rolls-Royce Canada (CDN)
Jan Kiciński, Politechnika Gdańska (POL)
Chang-Ho Kim, KIST-Europe (KOR)
R. Gordon Kirk, Virginia Tech (USA)
Chong-Won Lee, KAIST (KOR)
Chee W. Lim, City University of Hong Kong (HKG)
Eduard Malenovsky, Vysoké Učení Technické v Brně (CZE)
Richard Markert, Technische Universität Darmstadt (DEU)
Jeffrey J. Moore, Southwest Research Institute (USA)
Claus Myllerup, Lloyd’s Register OD (DKN)
C. Nataraj, Villanova University (USA)
Rainer Nordmann, Fraunhofer Institute for Structural Durability
and System Reliability LBF (DEU)
Christos A. Papadopoulos, University of Patras (GRC)
Paolo Pennacchi, Politecnico di Milano (ITA)
Eduardo Preciado Delgado, Instituto de Investigaciones Eléctricas (MEX)
Robert B. Randall, The University of New South Wales (AUS)
J.S. Rao, Kumaraguru College of Technology (IND)
Riccardo Rubini, Università degli Studi di Modena e Reggio Emilia (ITA)
Romuald Rzadkowsky, Politechnika Gdańska (POL)
Luis San Andrés, Texas A&M University (USA)
Jerzy T. Sawicki, Cleveland State University (USA)
T.N. Shiau, Bao Chief Green Ecoenergy Technology Co., Ltd (TWN)
Jyoti K. Sinha, The University of Manchester (GBR)
Andrea Vania, Politecnico di Milano (ITA)
IuriiVorobiov,A.N.PodgornyInstituteforMechanicalEngineeringProblems(UKR)
Hans I. Weber, PUC—Pontifícia Universidade Católica do Rio de Janeiro (BRA)
Bangchun Wen, Northeastern University (CHN)
Hakan L. Wettergren, Wolfram MathCore AB (SWE)
Maurice F. White, Norges Teknisk-Naturvitenskapelige Universitet (NOR)
Jaroslav Zapomel, Vysoká škola báňská—Technická univerzita Ostrava (CZE)
Wen Zhang, Fudan University (CHN)
Industrial Committee
Karl-Helmut Becker, MTU Aero Engines
Piero Bodini, ABB
Athanasios Chasalevris, BorgWarner Inc.
Andrea De Luca, Danieli & C. Officine Meccaniche SpA
Fadi Dohnal, Alstom
Committee ix
Lothar Eckert, Alstom
Florian Hiss, Siemens
Bartolomeus Irwanto, Alstom
Eric Knopf, Alstom
Thomas Krüger, Alstom
Paolo Lombardi, Eurobearings Srl
Edmund A. Memmott, Dresser-Rand Group Inc.
Lorenzo Naldi, General Electric
Ionel Nistor, EDF—Electricité de France
Emanuel Giuseppe Pesatori, Franco Tosi Meccanica SpA
Thorsten Prothmann, Alstom
Nicolas Peton, General Electric
Paolo Saccenti, Boldrocchi Srl
Joachim Schmied, DELTA JS AG
Kurt Steigleder, Alstom
Giuseppe Vannini, General Electric
Robin Williams, Rolls-Royce Group PLC
Vittorio Zanella, SKF