ebook img

Principles of Field Ionization and Field Desorption Mass Spectrometry PDF

344 Pages·1977·4.907 MB·English
Save to my drive
Quick download
Download
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Principles of Field Ionization and Field Desorption Mass Spectrometry

Other titles of interest BAKER & BETTERIDGE: Photoelectron Spectroscopy: Chemical and Analytical Aspects EMSLEY & LINDON: NMR Spectroscopy Using Liquid Crystal Solvents JACKMAN & STERNHELL: Applications of Nuclear Magnetic Resonance Spectroscopy in Organic Chemistry, 2nd edition PRICE & WILLIAMS: Time-of-Flight Mass Spectrometry SCHEINMANN: An Introduction to Spectroscopic Methods for the Identification of Organic Compounds Principles of Field Ionization and Field Desorption Mass Spectrometry by H. D. BECKEY PERGAMON PRESS OXFORD • NEW YORK • TORONTO • SYDNEY • PARIS • FRANKFURT U.K. Pergamon Press Ltd., Headington Hill Hall, Oxford 0C3 OBW, England U.S.A. Pergamon Press Inc., Maxwell House, Fairview Park, Elmsford, New York 10523, U.S.A. CANADA Pergamon of Canada Ltd., 75 The East Mall, Toronto, Ontario, Canada AUSTRALIA Pergamon Press (Rust.) Pty. Ltd., 19a Boundary Street, Rushcutters Bay, N.S.W. 2011, Australia FRANCE Pergamon Press SARL, 24 rue des Ecoles, 75240 Paris, Cedex 05, France FEDERAL REPUBLIC Pergamon Press GmbH, 6242 Kronberg/Taunus, OF GERMANY Pferdstrasse 1, Federal Republic of Germany Copyright © 1977 H. D. Becket' All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means: electronic, electrostatic, magnetic tape, mechanical, photocopying, recording or otherwise, without permission in writing from the author. First edition 1977 British Library Cataloguing in Publication Data Becket', Hans-Dieter Principles of field ionization and field desorption mass spectrometry. 1. Mass spectrometry I. Title 545'.33 QD96.13 77-30314 ISBN 0-08-020612-3 In order to make this volume available as economically and as rapidly as possible the author's typescript has been reproduced in its original form. This method unfortu- nately has its typographical limitations but it is hoped that they in no way distract the reader. Printed in Great Britain by William Clowes & Sons, Limited London, Beccles and Colchester PREFACE This book was originally planned as a second edition of the previous book "FIELD IONIZATION MASS SPECTROMETRY" (Pergamon Press) which was written mainly in 1969, but which did not appear before 1971. When the author of this book looked at the situation about six years later, he realized that the development of this area of research had increased so rapidly that he decided to write an essentially new book and to take over only some passages of the old one. The concept was to rearrange the contents according to the five main subareas which proved to be of growing importance: Theory of Field Ionization and Field Desorption, Experimental Techniques, High Field Surface Chemistry, Kinetics and Mechanisms of Decomposition of Field Ions in the Gas Phase, Qualitative and Quantitative Analysis with Field Ionization and Field Desorption Mass Spectrometry. Further, it was no longer possible to refer to virtually all publications which had appeared ( as in the first book), but rather to select the essential studies published by the end of 1976. Consequently, the title of the book was changed to "PRINCIPLES OF FIELD IONIZATION AND FIELD DESORPTION MASS SPECTROMETRY". The book could not have been finished without the invaluable aid of many people. First, I would like to thank Douglas ßarofsky who very carefully translated chapter one and two from German to English. Moreover, he made numerous critical comments and proposals to improve the quality of those chapters. A few pages were added after his translation which he could not check. Therefore, I don't blame him for errors in style or contents. Chapters three to five were written in English from the beginning. Andrew Thorne, a former student from Oxford, improved the English of chapter three.It was looked at from a scientific aspect by Franz Wilhelm Röllgen and Hans Josef Heinen to whom I am much indebted. Chapter four was read first by Peter Derrick, who gave some critical and useful comments, and who removed the worst errors of my English. Many new suggestions have since then been made on chapter four by Karsten Levsen who corrected errors and, even more important, proposed a new "red line" for making xi xii Preface this chapter much clearer. The English of chapter five was improved again by Andrew Thorne and it was looked through scientifically by Wolf Dieter Lehmann and to some extent by Hans-Rolf Schulten. Last, but not least, my most sincere thanks go to Mrs. Hanne Kret- schmer and Mrs. Dagmar Aston who typed the text on the Pergamon Press camera-ready laysheets. They untiringly carried out all changes in the text which seemed to be mandatory. INTRODUCTION Field ionizationt and field desorption mass spectrometry is a rather new branch of mass spectrometry which originated historically from FI microscopy as founded by Erwin Muller in 1953. The first quantitative and comprehensive investigation on Fl mass spectrometry was published in 1954 by Inghram and Gomer (1,2). The ion source for the mass spectrometer constructed by these authors could be used as an FE microscope as well. In another paper, Muller and Bahadur (3) reported on visual observation of ions which had been separated according to their mass by a magnetic field, on the luminescent screen of an Fl microscope. The close relation between FI or FE microscopy and FI mass spectrometry still remained obvious in these two papers. The author of this book started with a systematic investigation of the new discipline Field Ionization Mass Spectrometry in 1957, in a manner which did not make use of simultaneous or alternative microscopic observations. It was entirely concentrated on FT in connection with mass spectrometric problems in order to lead the new method to numerous applications in the area of physico-chemical investigations and quantitative or structural chemical analyses (4-6). At the beginning the number of authors working in this new field was very small. Nearly simultaneously with Inghram and Gomer, Drechsler (7) had pointed out the principle of an Fl source for mass spectrometric analyses which was realized experimentally a number of years later; Schmidt (8) reported on t FT is used throughout this book for"field ionization", FD for "field desorption", FE for "field emission" and EI for "electron impact". xiii xiv Introduction the design, and on experiments, with an improved version of this source. Block (9) started relatively early with applications of the FI mass spectrometric method to problems of adsorption and catalysis. Robertson (10) contributed on SI mass spectra taken with sharp metal edges. The names and the work of most authors having published on FI and FD mass spectrometry after the authors named so far will be discussed in the course of this book. The main reason for the initially rather slow development of the new field were among others: The number of spectra available was still too small to obtain an insight into the general properties of FI mass spectra; the theory was not yet sufficiently worked out for a good understanding of regularities observed in the FI spectra of homologous series of organic substances; the instrumental techniques were much less developed than today; there were only some rough ideas on what the main application of the new method would be in the future; and last but not least, there were no commercial FI/FD sources for mass spectrometry available. The number of users of FI mass spectrometers has been increasing, however, very quickly during the last few years, and a further quick extension of the area occurred after the recent introduction of commercial FI/FD sources, especially sources which are combined with electron impact facilities. During the last years various groups are found to be working in five main areas of FI/FD mass spectrometry: 1. Theory of field ionization and field desorption. 2. Instrumental development (mainly field anodes for FI and FD ion sources, adaption of ion sources to the different types of mass spectrometers, sample loading techniques, temperature programming, etc.). 3. "High field chemistry", heterogeneous catalysis. 4. Kinetics and mechanisms of decomposition of organic ions in the gas phase within the time range of 10 11 to 10-5 sec. Introduction xv 5. Qualitative and quantitative analyses with the FI and FD mass spectrometers. A brief comment will now, in the remaining space of this introduction, be given on the overall design of FI/FD mass spectrometers. The most specific part of these instruments is the FI/FD source which strongly differs in design and function from EI sources. On the other hand, the mass spectrometers connected with these FI/FD sources are of conventional design. Principles and design of the mass spectrometers themselves will therefore not be described in this book. There exists a number of excellent monographs on mass spectrometry which the reader may use as a general introduction to the principles and the design of mass spectrometers. All mass spectrometers could be used, in principle, in connection with FI/FD sources which are used in combination with EI sources, i.e. magnetic mass spectrometers or time-of-flight, high frequency, quadrupole, monopole or other mass spectrometers. 1. THEORY OF FIELD IONIZATION (FI) AND FIELD DESORPTION (FD) 1.1 Fl PROBABILITY Atoms or molecules are field ionized when they are subjected to high electric fields of the order of 107 to several times 108 V/cm. The first experimental evidence for FI was Rausch von Traubenberg's (11) observation that certain Stark effect lines in the optical spectrum of highly excited hydrogen atoms disappear if the gas is acted upon by an electric field of several times 1O5 V/cm. It was concluded from this experimental result that the lifetimes of highly excited electronic states are strongly reduced in the presence of high electric fields. Field strengths of the order of 108 V/cm are required for Fl to take place from the ground state of an atom or molecule instead of from a highly excited state. The mechanism of FI can be explained theoretically on the basis of the wave properties of matter. The probability for FI to occur from the ground state of a hydrogen atom was first calculated by Oppenheimer (12). More general, theoretical treatments have since been given by Kirchner (13), Inghram and Gomer (2), and Müller and Bahadur (3). The theory of FI developed by these authors (2,3,13) may be discussed with the aid of a potential energy diagram. The potential energy of the valence electron of an atom is drawn in Fig. 1.1 as a function of distance from an ideally smooth metal surface. The metal extends through the region r < O. The region r > O is vacuum. The surface of the metal is assumed to be perfectly clean, i.e. without adsorbed layers. The conduction band of the metal is filled with electrons up to the Fermi level ii . An amount of energy equal to the work function must 4 be transferred to an electron at the Fermi level in order to remove it from the metal to infinity. 1 2 Theory of FI and FD Given an atom, such as a hydrogen atom, at a distance d from the metal surface, the electronic ground state of the valence electron would, in general, be as indicated in Fig. 1.1. The ionization energy I of the atom must be supplied to the electron in order to remove it to an infinitely large, positive value of r. The electron energy diagram for a free atom is drawn in Fig. 1.la with a solid line. n 5f m /~~///////// t T -O Electronic Metal ground level a) b) Fig. 1.1. Potential energy V(r) of the valence electron of an atom in the vicinity of a metal surface: (a) without field, (b) with field. I = ionization energy; f = work function of the metal; V. = image potential (dashed line); VF = eFr2= potential energy due to external electric field (F = field strength); m = Fermi level. As will be described below, an image potential V must be i taken into account at small distances from the metal surface. In the case of FI, Fig. 1.1b, the potential energy due to the electric field eFr must be superimposed on that of the atom. The resulting potential energy for an electron, located a distance r from the surface along a line perpendicular to the surface and passing through the ion, was approximated by Muller and Bahadur (3) for a hydrogen atom by the expression _ 2 2 2 e V(r) = 4r + +r k

See more

The list of books you might like

Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.