Materials Science & Engineering A, Structural Materials: Properties, Microstructure and Processing 1994: Vol A183 Index PDF
Preview Materials Science & Engineering A, Structural Materials: Properties, Microstructure and Processing 1994: Vol A183 Index
Materials Science and Engineering, A183 (1994) 279 Author Index of Volume 183 Ardell, A. J., 169 Kameda,J. , 121 Sachdev, A. K., 69 Karmazin, L., 103 Saigal, A., 39 Beddoes, J., 211 Kattamis, T. Z., 195 Siegel, Jr., G. H., 257 King, J. E., 91 Skolianos, S., 195 Cadek,J. , 11 Kool, W. H., 247 Soboyejo, W. O., 49 Caruana, G., L5 Krejci,J. , 103 Subrahmanyam, J., 205 Chaki,T . K., 131 Suéry, M., 157 Chambers, B. V., 195 Lai, C., 257 Sustek, V., 11 Chaturvedi, M. C., 81 Lai, T. H., 239 Chen, M., 195 Laoui, T., L19 Tan, Z., 31 Chen, W., 81 Lee, J. T., 239 Chen, Y. L., L9 Legoux, J.-G., 139 Toropova, L. S., L1 Tsai, W. T., 239 Lewandowski, J. J., 59 Li, C., 23 Dallaire, S., 139 Dlouhy, A., 11 Li, G. H., 145 Van der Biest, O., L19 Li, H., 131 Varin, R. A., 145 Li, J., 233 Ellis, L. Y., 59 Vleugels, J., L19 Lieblich, M., L5 Eskin, Dm. G., L1 Lu, P., 257 Wachtman, Jr., J. B., 257 Favier, D., 157 MacEwen, S. R., 111 Wallace, W., 211 Fu, H., 233 Magnusson, C., 31 Wang, J. N., 267 Mao, X., 233 Wang, Y. C., 257 Garci-Cano, F., L5 Marrow, T. J., 91 Wang, Z.,L13 Gonzalez-Carrasco, J. L., L5 Mohan Rao, R., 205 Wimmel,J ., 169 Grujicic, M., 223 Wu, K. H., L9 Guillard, S., 181 Nguyen, T. G., 157 Wau, L., 111 Nguyen, T. H. B., 1 Hall, J. N., 69 Ho, S., 39 Pahutova, M., 11 Yang, D. Z., L9 Horsten, M. G., 247 Persson, B., 31 Yang, J.-M., 1 Immarigeon, J.-P., 211 Qi, M., L9 Quaak, C. J., 247 Zeman,J. , 103 Jeng, S. M., 1 Zhang, P., 23 Jian, M., 111 Rack, H. J., 181 Zhang, T., 23 Jones, J. W., 69 Ranjan, R., 121 Zhao, L., 211 Elsevier Sequoia Materials Science and Engineering, A183 (1994) 281-284 Subject Index of Volume 183 Aging Boron fatigue crack propagation mechanisms in a thermally aged phase transformations in XDTM TiB, reinforced near-y duplex stainless steel, 91 Ti-48AI-2Nb-2Mn, 181 microstructure and coarsening kinetics of Ni,Ge precipitates synthesis of TiB, in liquid copper, 139 in aged Ni-Ge alloys, 169 Alloys Carbon characterization of deformation and fracture behavior in cast microstructure and tribological properties of particulate amorphous and/or ceramic coatings and aluminum alloy TiC-reinforced Ni-base or stainless steel matrix com- substrate by small punch testing and acoustic emission posites, 195 techniques, 121 effects of layer thickness on impact toughness of Al/AI-SiC, combustion synthesis of MoSi,-—WSi, alloys, 205 laminates, 59 effect of Ni content on the microstructure, microhardness and influence of SiC particle volume fraction on the compressive fracture toughness of magnesium silicide ternary alloy, 145 behaviour of partially remelted Al-Si-based composites, laser surface alloying of stainless steel with silicon nitride, 239 157 mechanical alloying of ceramics in zirconia-ceria system, L9 particle size, volume fraction and matrix strength effects on microstructure and coarsening kinetics of Ni,Ge precipitates fatigue behavior and particle fracture in 2124 aluminum- in aged Ni-Ge alloys, 169 SiC, composites, 69 tensile and elastic properties of deformed heterogeneous alu- thermal residual stresses and mechanical behavior of cast minum alloys at room and elevated temperatures, L 1 SiC/Al composites, 39 y Phase and Ni,Cr-type long-range order in Ni-rich Casting Ni-Cr-Mo alloys, 103 effect of liquation on welding of a continuous cast sheet of an Aluminium Ni,AlI alloy containing Zr, 131 aluminium/Ni,Al composites processed by powder metal- Ceramics lurgy, L5 characterization of deformation and fracture behavior in characterization of deformation and fracture behavior in amorphous and/or ceramic coatings and aluminum alloy amorphous and/or ceramic coatings and aluminum alloy substrate by small punch testing and acoustic emission substrate by small punch testing and acoustic emission techniques, 121 techniques, 121 mechanical alloying of ceramics in zirconia-ceria system, L9 effect of liquation on welding of a continuous cast sheet of an Chromium Ni,;Al alloy containing Zr, 131 high temperature creep behaviour of a 15M,B-Fe-18Cr- effect of secondary phase on sialon-steel chemical interaction, 12Ni composite, 1 1 L19 investigation of the effects of matrix microstructure and inter- effects of layer thickness on impact toughness of Al/AI-SiC,, facial properties on the fatigue and fracture behavior of a laminates, 59 Ti-15V-3Cr-3Al-3Sn/SCS9 composite, 49 influence of SiC particle volume fraction on the compressive the core structure of (a/2)(110) screw dislocations in Fe- behaviour of partially remelted Al-Si-based composites, Ni-Cr-N austenite, 223 157 y phase and Ni,Cr-type long-range order in Ni-rich on crystallographic crack transfer across interfaces in four Ni-Cr-Mo alloys, 103 types of aluminum bicrystal, 23 Coarsening particle size, volume fraction and matrix strength effects on microstructure and coarsening kinetics of Ni,Ge precipitates fatigue behavior and particle fracture in 2124 aluminum- in aged Ni-Ge alloys, 169 SiC,, composites, 69 Coatings phase transformations in XDTM TiB, reinforced near-y characterization of deformation and fracture behavior in Ti-48Ai-2Nb-2Mn, 181 amorphous and/or ceramic coatings and aluminum alloy rheological behaviour of partially solidified aluminium matrix substrate by small punch testing and acoustic emission composites, 247 techniques, 121 tensile and elastic properties of deformed heterogeneous alu- Combustion minum alloys at room and elevated temperatures, L 1 combustion synthesis of MoSi,-WSi, alloys, 205 the isothermal compression response of a near y-TiAl+W Composites intermetallic, 211 aluminium/Ni,Al composites processed by powder metal- thermal residual stresses and mechanical behavior of cast lurgy, L5 SiC/Al composites, 39 finite element modelling of residual stresses and strength dif- Austenite ferential effect in discontinuously reinforced metal matrix the core structure of (a/2)(110) screw dislocations in Fe- composites, 111 Ni-Cr-N austenite, 223 high temperature creep behaviour of a 15M,B-Fe-18Cr- 12Ni composite, 11 Bauschinger effect influence of SiC particle volume fraction on the compressive the Bauschinger effect in compression-tension of sheet behaviour of partially remelted Al-Si-baed composites, metals, 31 157 282 particle size, volume fraction and matrix strength effects on investigation of the effects of matrix microstructure and inter- fatigue behavior and particle fracture in 2124 aluminum- facial properties on the fatigue and fracture behavior of a SiC, composites, 69 Ti-15V-3Cr-3AI-3Sn/SCS9 composite, 49 rheological behaviour of partially solidified aluminium matrix particle size, volume fraction and matrix strength effects on composites, 247 fatigue behavior and particle fracture in 2124 aluminum- the effect of fiber orientation on fatigue crack propagation in SiC, composites, 69 SCS-6/Ti-15-3 composites, | the effect of fiber orientation on fatigue crack propagation in thermal residual stresses and mechanical behavior of cast SCS-6/Ti-15-3 composites, 1 SiC/Al composites, 39 Fibres Composites the effect of fiber orientation on fatigue crack propagation in cast microstructure and tribological properties of particulate SCS-6/Ti-15-3 composites, | TiC-reinforced Ni-base or stainless steel matrix com- Finite element modelling posites, 195 finite element modelling of residual stresses and strength Compression differential effect in discontinuously reinforced metal influence of SiC particle volume fraction on the compressive matrix composites, 11 1 behaviour of partially remelted Al-Si-based composites, Fracture 157 characterization of deformation and fracture behavior in the Bauschinger effect in compression-tension of sheet metals, amorphous and/or ceramic coatings and aluminum alloy 31 substrate by small punch testing and acoustic emission Copper techniques, 121 synthesis of TiB, in liquid copper, 139 effect of Ni content on the microstructure, microhardness and Cracking fracture toughness of magnesium silicide ternary alloy, 145 fatigue crack propagation mechanisms in a thermally aged investigation of the effects of matrix microstructure and inter- duplex stainless steel, 91 facial properties on the fatigue and fracture behavior of a on crystallographic crack transfer across interfaces in four Ti-15V-3Cr-3AI-3Sn/SCS9 composite, 49 types of aluminum bicrystal, 23 particle size, volume fraction and matrix strength effects on the effect of fiber orientation on fatigue crack propagation in fatigue behavior and particle fracture in 2124 aluminum- SCS-6/Ti-15-3 composites, 1 SiC, composites, 69 Creep Friction Harper-Dorn creep in olivine, 267 relation of friction and wear to processing parameters of high temperature creep behaviour of a 15M,B-Fe-18Cr- polycrystalline diamond films grown on silicon and silica 12Ni composite, 11 substrates by the hot filament method, 257 the effect of grain boundary precipitates on the creep behav- iour of Inconel 718, 81 Germanium Crystals microstructure and coarsening kinetics of Ni,Ge precipitates cyclic stress-strain response of alpha brass single crystals in aged Ni-Ge alloys, 169 oriented for easy glide, L13 Grain boundaries on crystallographic crack transfer across interfaces in four the effect of grain boundary precipitates on the creep behavior types of aluminum bicrystal, 23 of Inconel 718, 81 relation of friction and wear to processing parameters of Growth rates polycrystalline diamond films grown on silicon and silica effect of local solidification time on the dendrite-to-cell substrates by the hot filament method, 257 transition at growth rates, 233 Deformation Hot filament method characterization of deformation and fracture behavior in relation of friction and wear to processing parameters of amorphous and/or ceramic coatings and aluminum alloy polycrystalline diamond films grown on silicon and silica substrate by small punch testing and acoustic emission substrates by the hot filament method, 257 techniques, 121 tensile and elastic properties of deformed heterogeneous Impact aluminum alloys at room and elevated temperatures, L 1 Diamond films effects of layer thickness on impact toughness of Al/AI-SiC,, laminates, 59 relation of friction and wear to processing parameters of Interfaces polycrystalline diamond films grown on silicon and silica substrates by the hot filament method, 257 investigation of the effects of matrix microstructure and inter- facial properties on the fatigue and fracture behavior of a Dislocation Ti-15V-3Cr-3AI-3Sn/SCS9 composite, 49 the core structure of (a/2)(110) screw dislocations in Fe-Ni-Cr-N austenite, 223 on crystallographic crack transfer across interfaces in four types of aluminum bicrystal, 23 Intermetallics Elastic properties the isothermal compression response of a near y-TiAl+W tensile and elastic properties of deformed heterogeneous intermetallic, 211 aluminum alloys at room and elevated temperatures, L 1 Iron high temperature creep behaviour of a 15 M,B-Fe-18Cr- Fatigue 12Ni composite, 1 1 fatigue crack propagation mechanisms in a thermally aged the core structure of (a/2)(110) screw dislocations in duplex stainless steel, 91 Fe-Ni-Cr-N austenite, 223 Laminates Powders effects of layer thickness on impact toughness of Al/AI-SiC,, aluminium/Ni,Al composites processed by powder metal- laminates, 59 lurgy, L5 Lasers Precipitates laser surface alloying of stainless steel with silicon nitride, 239 microstructure and coarsening kinetics of Ni,Ge precipitates Liquation in aged Ni-Ge alloys, 169 effect of liquation on welding of a continuous cast sheet of an the effect of grain boundary precipitates on the creep behavior Ni,Al alloy containing Zr, 131 of Inconel 718, 81 Magnesium Silicon effect of Ni content on the microstructure, microhardness and combustion synthesis of MoSi,—WSi, alloys, 205 fracture toughness of magnesium silicide ternary alloy, 145 effect of Ni content on the microstructure, microhardness and Manganese fracture toughness of magnesium silicide ternary alloy, 145 phase transformations in XD™ TiB, reinforced near-y effect of secondary phase on sialon-steel chemical interaction, Ti-48Al-2Nb-2Mnh, 181 L19 Metallurgy effects of layer thickness on impact toughness of Al/Al-SiC aluminium/Ni,Al composites processed by powder metal- P laminates, 59 lurgy,L 5 influence of SiC particle volume fraction on the compressive Metals behaviour of partially remelted Al-Si-based composites, finite element modelling of residual stresses and strength 157 differential effect in discontinuously reinforced metal laser surface alloying of stainless steel with silicon nitride, 239 matrix composites, 111 particle size, volume fraction and matrix strength effects on the Bauschinger effect in compression-tension of sheet fatigue behavior and particle fracture in 2124 aluminum- metals,3 1 SiC, composites, 69 Molybdenum relation of friction and wear to processing parameters of combustion synthesis of MoSi,-—WSi, alloys, 205 polycrystalline diamond films grown on silicon and silica y phase and Ni,Cr-type long-range order in Ni-rich substrates by the hot filament method, 257 Ni-Cr-Mo alloys, 103 thermal residual stresses and mechanical behavior of cast SiC/Al composites, 39 Nickel Solidification aluminium/Ni,Al composites processed by powder metal- effect of local solidification time on the dendrite-to-cell lurgy, LS transition at growth rates, 233 cast microstructure and tribological properties of particulate rheological behaviour of partially solidified aluminium matrix TiC-reinforced Ni-base or stainless steel matrix com- composites, 247 posites, 195 Steels effect of liquation on welding of a continuous cast sheet of an cast microstructure and tribological properties of particulate Ni,Al alloy containing Zr, 131 TiC-reinforced Ni-base or stainless steel matrix com- effect of Ni content on the microstructure, microhardness and posites, 195 fracture toughness of magnesium silicide ternary alloy, 145 fatigue crack propagation mechanisms in a thermally aged high temperature creep behaviour of a 15M,B-Fe-18Cr- duplex stainless steel, 91 12Ni composite, 11 Strain laser surface alloying of stainless steel with silicon nitride, 239 cyclic stress-strain response of alpha brass single crystals microstructure and coarsening kinetics of Ni,Ge precipitates oriented for easy glide, L13 in aged Ni-Ge alloys, 169 Stress the core structure of (a/2)(110) screw dislocations in cyclic stress-strain response of alpha brass single crystals Fe-Ni-Cr-N austenite, 223 oriented for easy glide, L13 y phase and Ni,Cr-type long-range order in Ni-rich finite element modelling of residual stresses and strength Ni-Cr-Mo alloys, 103 differential effect in discontinuously reinforced metal Niobium matrix composites, 111 phase transformations in XD™ TiB, reinforced near-y thermal residual stresses and mechanical behavior of cast Ti-48AIl-2Nb-2Mnh, 181 SiC/Al composites, 39 Nitrogen effect of secondary phase on sialon-steel chemical interaction, L19 Tensile properties the core structure of (a/2)(110) screw dislocations in Fe- tensile and elastic properties of deformed heterogeneous Ni-Cr-N austenite, 223 aluminum alloys at room and elevated temperatures, L1 Tension Olivine the Bauschinger effect in compression-tension of sheet Harper-Dorn creep in olivine, 267 metals, 31 Oxygen Titanium effect of secondary phase on sialon-steel chemical interaction, cast microstructure and tribological properties of particulate L19 TiC-reinforced Ni-base or stainless steel matrix com- posites, 195 Phase transformations investigation of the effects of matrix microstructure and inter- phase transformations in XD™ TiB, reinforced near-y facial properties on the fatigue and fracture behavior of a Ti-48Al-2Nb-2Mnh, 181 Ti-15V-3Cr-3A]-3Sn/SCS9 composite, 49 284 phase transformations in XD™ TiB, reinforced near-y Vanadium Ti-48AI-2Nb-2Mn, 181 investigation of the effects of matrix microstructure and inter- synthesis of TiB, in liquid copper, 139 facial properties on the fatigue and fracture behavior of a the effect of fiber orientation on fatigue crack propagation in Ti-15V-3Cr-3AI-3Sn/SCS9 composite, 49 SCS-6/Ti-15-3 composites, | the isothermal compression response of a near y-TiAl +W Wear intermetallic, 211 relation of friction and wear to processing parameters of Toughness polycrystalline diamond films grown on silicon and silica effects of layer thickness on impact toughness of Al/AI-SiC,, substrates by the hot filament method, 257 laminates, 59 Welding Tungsten effect of liquation on welding of a continuous cast sheet of an combustion synthesis of MoSi,-WSi, alloys, 205 Ni;Al alloy containing Zr, 131 the isothermal compression response of a near y-TiA+l W Zirconium intermetallic, 211 effect of liquation on welding of a continuous cast sheet of an Ni,Al alloy containing Zr, 131 mechanical alloying of ceramics in zirconia—ceria system, L9
The list of books you might like
