Table Of ContentMaterials Science and Engineering, A171 (1993) 285
Author Index of Volume 171
Akhmadeev, N. A., 143 Hong, S.1., 181 Ocansey, P., 231
Alyoshin, G., 163 Hwang, J.R., 213 Orekhov, N., 163
Andrieu, E., 191
Pelletier, J. M., 263
Jeng, S. M., 65
Perng, C. C., 213
Bartels, A., 127 Jo, H. H., 151
Poirier, D. R., 231
Beckerman, C., 199
Bhadeshia, H. K. D., 223
Kassam, Z. H. A., 55 Razumovskii, I., 163
Kaysser, W. A., 271 Rios, P. R., 175
Castillo-Gomez, J. R., 35
Chawla, K. K., 249 Sallamand, P., 263
Lai, M. O., 13, 21, 257
Choi, S. R., 77 Sastry, S. M. L., 95
Lee, J.-L., 223
Chokshi, A. H., 47 Sharma, S. C., 169
Lewis, C. A., 1
Soboyejo, W. O., 95
Li, B., 105
Doong, J. L., 213 Li, X., 249 Stobbs, W. M., 1
Lim, L. C., 13, 21
Tikare, V., 77
Ebrahimi, F., 35 Little, E. A., 241
Ellyin, F., 105 Lu, L., 257
Valiev, R. Z., 143
Es-Souni, M., 127
Vecchio, K.S., 181
Faulkner, R. G., 241
Ma, J., 13 Volkmann, T., 169
Fujikawa, S.1., 151
Madsen, A., 191
Miao, B., 13, 21 Wagner, R., 127
Ghonem, H., 191 Mikhailov, S. B., 143 Waite, N. C., 241
Gibeling, J.C., 115 Mishin, Y., 163 Wang, C. Y., 199
Gotman, I., 271 Mogilevsky, P., 271 Wang, Z., 55, 85
Gray, III, G. T., 181 Morgan, T. S., 241 Withers, P. J., 1
Groza, J.R., 115 Mukherjee, A. K., 47
Xu, Z. R., 249
Gutmanas, E. Y., 271 Mulyukov, R. R., 143
Yang, J. M., 65
Herlach, D. M., 169 Noat, P., 163
Zhang, J., 85, 257
Hoelzer, D. T., 35 Northwood, D. O., 13, 21
Elsevier Sequoia
Materials Science and Engineering, A171 (1993) 287-289
Subject Index of Volume 171
Aging Austenite
microstructural changes during aging of a near-a titanium quasi-stoichiometric coarsening of f.c.c. carbides in micro-
alloy, 191 alloyed austenite containing niobium and vanadium, 175
Air
crack initiation and fatigue lives in air and vacuum environ-
Bauschinger effect
ments, 105
Bauschinger effect in a modified Zr-2.5wt.%Nb pressure tube
Alloys
material, 55
a unified solute diffusion model for columnar and equiaxed
Boron
dendritic alloy solidification, 199
microstructure. and thermal stability of coatings obtained by
creep deformation and creep microstructures of a near y-TiAl
interaction of SiC and B,C with Cr and Ti powders, 271
alloy Ti-48AI-2Cr, 127
Cu-based shape memory powder preparation using the
mechanical alloying technique, 257 Carbides
internal stress induced debonding in a zirconia-reinforced quasi-stoichiometric coarsening of f.c.c. carbides in micro-
6061 aluminium alloy composite, 1 alloyed austenite containing niobium and vanadium, 175
kinetics of precipitation in Al-Sc alloys and low temperature Carbon
solid solubility of scandium in aluminium studied by elec- creep behavior and damage mechanisms of SiC-fiber-
trical resistivity measurements, 151 reinforced titanium matrix composite, 65
laser cladding on aluminium-based alloys: microstructural microstructure and thermal stability of coatings obtained by
features, 263 interaction of SiC and B,C with Cr and Ti powders, 271
microstructural changes during aging of a near-a titanium Cavitation
alloy, 191 the influence of hydrostatic pressure on grain boundary
model of diffusion coarsening of the raft structure in single sliding in superplasticity: implications for cavitation, 47
crystals of nickel-base superalloys, 163 Chromium
quasi-stoichiometric coarsening of f.c.c. carbides in micro- creep deformation and creep microstructures of a near y-TiAl
alloyed austenite containing niobium and vanadium, 175 alloy Ti-48AI-2Cr, 127
radiation-inducded grain boundary segregation in dilute Coarsening
alloys, 241 model of diffusion coarsening of the raft structure in single
short fatigue growth and J-R curve behavior of the particulate crystals of nickel-base superalloys, 163
Al,O,-reinforced Al(2014) alloy, 85 quasi-stoichiometric coarsening of f.c.c. carbides in micro-
Alumina alloyed austenite containing niobium and vanadium, 175
crack healing of alumina with a residual glassy phase: strength, Composites
fracture toughness and fatigue, 77 high strain rate tensile properties of an (AI,O, particles)-(Al
effect of high temperature exposure on the tensile strength of alloy 6061-T6) metal matrix composite, 213
alumina fiber Nextel 610, 249 internal stress induced debonding in a zirconia-reinforced
Aluminium 6061 aluminium alloy composite, 1
creep deformation and creep microstructures of a near y-TiAl quenching and thermal cycling effects in a 1060-Al
alloy Ti-48AI-2Cr, 127 matrix—10vol.%AI,O, particulate reinforced metal matrix
fracture toughness of 0 +x microstructures in the Nb-Ti-Al composite, 181
system, 35 Copper
high strain rate tensile properties of an (AI,O; particles)-(Al Cu-based shape memory powder preparation using the
alloy 6061-T6) metal matrix composite, 213 mechanical alloying technique, 257
internal stress induced debonding in a zirconia-reinforced principles of particle selection for dispersion-strengthened
6061 aluminium alloy composite, 1 copper, 115
kinetics of precipitation in Al-Sc alloys and low temperature strain amplitude dependence of internal friction and strength
solid solubility of scandium in aluminium studied by elec- of submicrometre-grained copper, 143
trical resistivity measurements, 151 Cracking
laser cladding on aluminium-base alloys: microstructural crack healing of alumina with a residual glassy phase: strength,
features, 263 fracture toughness and fatigue, 77
microstructural development in _ drop-tube-solidified crack initiation and fatigue lives in air and vacuum environ-
Al-3.6wt.%Fe droplets: an analysis, 169 ments, 105
quenching and thermal cycling effects in a 1060-Al Creep
matrix—10vol.%AlI,O, particulate reinforced metal matrix creep behavior and damage mechanisms of SiC-fiber-
composite, 181 reinforced titanium matrix composite, 65
short fatigue growth and J-R curve behavior of the particulate creep deformation and creep microstructures of a near y-TiAl
AlL,O,-reinforced Al(2014) alloy, 85 alloy Ti-48AI-2Cr, 127
Elsevier Sequoia
288
Crystals Grain boundary sliding
model of diffusion coarsening of the raft structure in single the influence of hydrostatic pressure on grain boundary
crystals of nickel-base superalloys, 163 sliding in superplasticity: implications for cavitation, 47
Damage High temperature exposure
creep behavior and damage mechanisms of SiC-fiber- effect of high temperature exposure on the tensile strength of
reinforced titanium matrix composite, 65 alumina fiber Nextel 610, 249
Debonding Hydrostatic pressure
internal stress induced debonding in a zirconia-reinforced the influence of hydrostatic pressure on grain boundary
6061 aluminium alloy composite, 1 sliding in superplasticity: implications for cavitation, 47
Deformation
creep deformation and creep microstructures of a near y-TiAl Intermetallics
alloy Ti-48AI-2Cr, 127 an investigation of the effects of ductile phase reinforcement
Dendrites on the mechanical behavior of advanced high temperature
a unified solute diffusion model for columnar and equiaxed intermetallics, 95
dendritic alloy solidification, 199 Iron
Diffusion microstructural development in drop-tube-solidified
a unified solute diffusion model for columnar and equiaxed Al-3.6wt.%Fe droplets: an analysis, 169
dendritic alloy solidification, 199
model of diffusion coarsening of the raft structure in single Laser cladding
crystals of nickel-base superalloys, 163 laser cladding on aluminium-base alloys: microstructural
Dispersion strengthening features, 263
principles of particle selection for dispersion-strengthened
copper, 115 Mechanical alloying
Drop tube solidification Cu-based shape memory powder preparation using the
microstructural development in drop-tube-solidified mechanical alloying technique, 257
Al-3.6wt.%Fe droplets: an analysis, 169 Mechanical behavior
Ductility an investigation of the effects of ductile phase reinforcement
an investigation of the effects of ductile phase reinforcement on the mechanical behavior of advanced high temperature
on the mechanical behavior of advanced high temperature intermetallics, 95
intermetallics, 95 Metal matrix composites
high strain rate tensile properties of an (Al,O, particles)-(Al
Electrical resistivity alloy 6061-T6) metal matrix composite, 213
kinetics of precipitation in Al-Sc alloys and low temperature quenching and thermal cycling effects in a 1060-Al
solid solubility of scandium in aluminium studied by elec- matrix—10vol.%AI,O, particulate reinforced metal matrix
trical resistivity measurements, 151 composite, 181
Mushy zones
Fatigue permeability for flow of liquid through equiaxial mushy zones,
crack healing of alumina with residual glassy phase: strength, 231
fracture toughness and fatigue, 77
crack initiation and fatigue lives in air and vacuum environ- Nextel 610
ments, 105 effect of high temperature exposure on the tensile strength of
short fatigue growth and J-R curve behavior of the particulate alumina fiber Nextel 610, 249
Al,O,-reinforced Al(2014) alloy, 85 Nickel
Fibre reinforcement model of diffusion coarsening of the raft structure in single
creep behavior and damage mechanisms of SiC-fiber- crystals of nickel-base superalloys, 163
reinforced titanium matrix composite, 65 Niobium
Fibres Bauschinger effect in a modified Zr-2.5wt.%Nb pressure tube
effect of high temperature exposure on the tensile strength of material, 55
alumina fiber Nextel 610, 249 fracture toughness of 0 +x microstructures in the Nb-Ti-Al
Fracture system, 35
fracture toughness of 0 + x microstructures in the Nb-Ti-Al quasi-stoichiometric coarsening of f.c.c. carbides in micro-
system, 35 alloyed austenite containing niobium and vanadium, 175
Fracture toughness
crack healing of alumina with a residual glassy phase: strength, Oxygen
fracture toughness and fatigue, 77 high strain rate tensile properties of an (Al,O, particles)-(Al
Friction ) alloy 6061-T6) metal matrix composite, 213
strain amplitude dependence of internal friction and strength quenching and thermal cycling effects in a 1060-Al
of submicrometre-grained copper, 143 matrix—10vol.%AI,O; particulate reinforced metal matrix
composite, 181
Glassy phase short fatigue growth and J-R curve behavior of the particulate
crack healing of alumina with a residual glassy phase: strength, Al,O,-reinforced Al(2014) alloy, 85
fracture toughness and fatigue, 77
Grain boundary segregation Particle selection
radiation-induced grain boundary segregation in dilute alloys, principles of particle selection for dispersion-strengthened
241 copper, 115
289
Permeability strain amplitude dependence of internal friction and strength
permeability for flow of liquid through equiaxial mushy zones, of submicrometre-grained copper, 143
FY Strength
Phase reinforcement crack healing of alumina with a residual glassy phase: strength,
an investigation of the effects of ductile phase reinforcement fracture toughness and fatigue, 77
on the mechanical behavior of advanced high temperature Stress
intermetallics, 95 internal stress induced debonding in a zirconia-reinforced
Plasticity 6061 aluminium alloy composite, 1
the influence of hydrostatic pressure on grain boundary Submicrometre graining
sliding in superplasticity: implications for cavitation, 47 strain amplitude dependence of internal friction and strength
Powders of submicrometre-grained copper, 143
microstructure and thermal stability of coatings obtained by
interaction of SiC and B,C with Cr and Ti powders, 271 Tempering
Precipitation microstructure of tempered AISI 403 stainless steel, 21
kinetics of precipitation in Al-Sc alloys and low temperature tempering of AISI 403 stainless steel, 13
solid solubility of scandium in aluminium studied by elec- Tensile properties
trical resistivity measurements, 151 high strain rate tensile properties of an (Al,O, particles)-(Al
alloy 6061-T6) metal matrix composite, 213
Tensile strength
Quenching
effect of high temperature exposure on the tensile strength of
quenching and thermal cycling effects in a 1060-Al
matrix—10vol.%AI,O, particulate reinforced metal matrix alumina fiber Nextel 610, 249
Thermal cycling
composite, 181
quenching and thermal cycling effects in a 1060-Al
matrix—10vol.%Al1,O; particulate reinforced metal matrix
Radiation
composite, 181
radiation-induced grain boundary segregation in dilute alloys,
Thermal stability
241
microstructure and thermal stability of coatings obtained by
Raft structures
interaction of SiC and B,C with Cr and Ti powders, 271
model of diffusion coarsening of the raft structure in single
Titanium
crystals of nickel-base superalloys, 163
creep behavior and damage mechanisms of SiC-fiber-
reinforced titanium matrix composite, 65
Scandium creep deformation and creep microstructures of a near y-TiAl
kinetics of precipitation in Al-Sc alloys and low temperature alloy Ti-48AI1-2Cr, 127
solid solubility of scandium in aluminium studied by elec- fracture toughness of o +x microstructures in the Nb-Ti-Al
trical resistivity measurements, 151 system, 35
Shape memory powders microstructural changes during aging of a near-a titanium
Cu-based shape memory powder preparation using the alloy, 191
mechanical alloying technique, 257 microstructure and thermal stability of coatings obtained by
Silicon interaction of SiC and B,C with Cr and Ti powders, 271
creep behavior and damage mechanisms of SiC-fiber- TTT diagrams
reinforced titanium matrix composite, 65 a methodology for the prediction of time-temperature-
microstructure and thermal stability of coatings obtained by transformation diagrams, 223
interaction of SiC and B,C with Cr and Ti powders, 271
Solidification Vacuum
a unified solute diffusion model for columnar and equiaxed crack initiation and fatigue lives in air and vacuum environ-
dendritic alloy solidification, 199 ments, 105
Solubility Vanadium
kinetics of precipitation in Al-Sc alloys and low temperature quasi-stoichiometric coarsening of f.c.c. carbides in micro-
solid solubility of scandium in aluminium studied by elec- alloyed austenite containing niobium and vanadium, 175
trical resistivity measurements, 151
Stainless steel Zirconia
microstructure of tempered AISI 403 stainless steel, 21 internal stress induced debonding in a zirconia-reinforced
tempering of AISI 403 stainless steel, 13 6061 aluminium alloy composite, 1
Strain Zirconium
high strain rate tensile properties of an (Al,O, particles)-(Al Bauschinger effect in a modified Zr-2.5wt.Nb pressure tube
alloy 6061-T6) metal matrix composite, 213 material, 55
