Materials Science and Engineering, A169 (1993) 177 Author Index of Volume 169 Agrén, J., 149 Hallstedt, B., 149 Namboodhiri, T. K. G., 111 Ajayi, O. O., L5 Hariprasad, S., L13 Néda, Z., L1 Anderson, K. R., 167 Hornbogen, E., 33 Hu, Z. Q., L17 Owen, W.S., 103 Baker, T. N., 53 Bako, B., L1 Jerina, K. L., L13 Pai, B. C., 93 Barinov, S. M., L9 Peralta, P., 43 Belkahla, S., 119 Kassner, M. E., 9 Pillai, U. T. S., 93 Beranger, G., 85 Kejian, H., 53 Pilvin, P., 85 Blankenship, Jr., C. P., 33 Kelkutty, V. S., 93 King, J. E., 19 Ramaswamy, V., 111 Chandler, H. D., 27 Kosco, J. B., 1 Ravi, K., 111 Chao, C. G., 79 Koss, D. A., 1 Revel, P., 85 Charlier, J., 67 Koyama, T., 159 Rolim Lopes, L. C., 67 Clavel, M., 85 Cook, R. E., L5 Laird, C., 43 Sastry, S. M. L., L13 Lee, R. H., L5 Satyanarayana, K. G., 93 Ding, B. Z., L17 Li, X., 9 Schober, A., 43 Dreshfield, R. L., 167 Liu, T. M., 79 Siegmund, T., 125 Ellis, D., 167 Liu, X. D., L17 Starke, Jr., E. A., 33 Liu, Z. K., 149 Fischer, F. D., 125 Totemeier, T. C., 19 Flores Zuniga, H., 119 Majumdar, A., 135 McQueen, H. J., 9 Wang, J. T., L17 Gale, W. F., 19 Miyazaki, T., 159 Werner, E., 125 Groza, J. R., 167 Mocsy, A., L1 Gruyicic, M., 103 Muddle, B. C., 135 Zelin, M. G., 99 Guenin, G., 119 Mukherjee, A. K., 99 Zhou, X. W., 103 Elsevier Sequoia Materials Science and Engineering, A169 (1993) 179-182 Subject Index of Volume 169 Adhesion the effect of homogenization and precipitation treatments on preparation by diffusion bonding and adhesve bonding of the extrudability and ambient-temperature mechanical aluminum alloy specimens for fracture toughness and properties of aluminum alloy AA2024, 9 fatigue crack growth resistance measurements in different Anisotropy orientations, L13 elastic stresses in anisotropic bicrystals, 43 Alloys Austenite effect of molybdenum on the resistance to H,S of high sulphur Monte Carlo analysis of short-range order in nitrogen- microalloyed steels, 111 strengthened Fe-Ni-Cr-N austenitic alloys, 103 elaboration and characterization of new low temperature shape memory Cu-Al-Be alloys, 119 estimation of energy-dissipative process development during Beryllium crack propagation in an intermetallic alloy, L9 elaboration and characterization of new low temperature fracture behaviour of an aluminide coating on a single crystal shape memory Cu-Al-Be alloys, 119 nickel base superalloy, 19 mechanical properties and microstructural evolution of a cobalt base alloy coating, 85 microstructural evolution and thermal stability of precipita- Ceramics tion-strengthened Cu-8Cr-4Nb alloy, 167 plasma etching of structural ceramics for microstructural microstructure in rapidly solidified Al-Ti alloys, 135 analysis, L5 Monte Carlo analysis of short-range order in nitrogen- Chromium strengthened Fe-Ni-Cr-N austenitic alloys, 103 microstructural evolution and thermal stability of precipita- predicting slip behavior in alloys containing shearable and tion-strengthened Cu-8Cr-4Nb alloy, 167 strong particles, 33 Monte Carlo analysis of short-range order in nitrogen- preparation by diffusion bonding and adhesve bonding of strengthened Fe-Ni-Cr-N austenitic alloys, 103 aluminum alloy specimens for fracture toughness and fatigue crack growth resistance measurements in different Coarsening orientations, L13 stability bifurcation against coarsening in elastically con- pressure die cast graphite dispersed Al-Si-Mg alloy matrix strained many-particle systems, 159 composites, 93 Coatings structure and properties of Fe-based nanocrystalline alloys fracture behaviour of an aluminide coating on a single crystal containing a small amount of transition elements, L17 nickel base superalloy, 19 the effect of homogenization and precipitation treatments on mechanical properties and microstructural evolution of a the extrudability and ambient-temperature mechanical cobalt base alloy coating, 85 properties of aluminum alloy AA2024, 9 Cobalt work hardening of mechanically alloyed Fe-Y,O, alloys, 1 mechanical properties and microstructural evolution of a Alumina cobalt base alloy coating, 85 effect of magnesium on mechanical properties of alumina- Composites fiber-reinforced aluminum matrix composites formed by pressure die cast graphite dispersed Al-Si-Mg alloy matrix pressure infiltration casting, 79 composites, 93 Aluminides Copper fracture behaviour of an aluminide coating on a single crystal creep of copper in the temperature range 423-623 K, 27 nickel base superalloy, 19 elaboration and characterization of new low temperature Aluminium shape memory Cu-Al-Be alloys, 119 effect of magnesium on mechanical properties of alumina- microstructural evolution and thermal stability of precipita- fiber-reinforced aluminum matrix composites formed by tion-strengthened Cu-8Cr-4Nb alloy, 167 pressure infiltration casting, 79 Cracking elaboration and characterization of new low temperature estimation of energy-dissipative process development during shape memory Cu-Al-Be alloys, 119 crack propagation in an intermetallic alloy, L9 microstructure in rapidly solidified Al-Ti alloys, 135 Creep preparation by diffusion bonding and adhesve bonding of creep of copper in the temperature range 423-623 K, 27 aluminum alloy specimens for fracture toughness and Crystals fatigue crack growth resistance measurements in different elastic stresses in anisotropic bicrystals, 43 orientations, L13 fracture behaviour of an aluminide coating on a single crystal pressure die cast graphite dispersed Al-Si-Mg alloy matrix nickel base superalloy, 19 composites, 93 Cyclic behaviour reactions in Al,O,-Mg metal matrix composites during effect of grain size and intergranular stresses on the cyclic prolonged heat treatment at 400, 500 and 600 °C, 149 behaviour of a ferritic steel, 67 Elsevier Sequoia 180 Deformation Iron on the kinetical interaction of high-temperature deformation Monte Carlo analysis of short-range order in nitrogen- mechanisms, 99 strengthened Fe-Ni-Cr-N austenitic alloys, 103 the irreversible deformation of a duplex stainless steel under structure and properties of Fe-based nanocrystalline alloys thermal cycling, 125 containing a small amount of transition elements, L17 Diffusion work hardening of mechanically alloyed Fe-Y,O, alloys, 1 preparation by diffusion bonding and adhesve bonding of aluminum alloy specimens for fracture toughness and Kinetical interaction fatigue crack growth resistance measurements in different on the kinetical interaction of high-temperature deformation orientations, L13 mechanisms, 99 Elasticity Magnesium elastic stresses in anisotropic bicrystals, 43 effect of magnesium on mechanical properties of alumina- stability bifurcation against coarsening in elastically con- fiber-reinforced aluminum matrix composites formed by strained many-particle systems, 159 pressure infiltration casting, 79 pressure die cast graphite dispersed Al-Si-Mg alloy matrix Fatigue composites, 93 preparation by diffusion bonding and adhesve bonding of Many-particle systems aluminum alloy specimens for fracture toughness and stability bifurcation against coarsening § in elastically fatigue crack growth resistance measurements in different constrained many-particle systems, 159 orientations, L13 Mechanical alloying Ferrites work hardening of mechanically alloyed Fe-Y,O;, alloys, 1 effect of grain size and intergranular stresses on the cyclic Mechanical properties behaviour of a ferritic steel, 67 effect of magnesium on mechanical properties of alumina- Fibre reinforcement fiber-reinforced aluminum matrix composites formed by effect of magnesium on mechanical properties of alumina- pressure infiltration casting, 79 fiber-reinforced aluminum matrix composites formed by mechanical properties and microstructural evolution of a pressure infiltration casting, 79 ! cobalt base alloy coating, 85 Fracture the effect of homogenization and precipitation treatments on fracture behaviour of an aluminide coating on a single crystal the extrudability and ambient-temperature mechanical nickel base superalloy, 19 properties of aluminum alloy AA2024, 9 preparation by diffusion bonding and adhesve bonding of the effects of small titanium additions on the mechanical aluminum alloy specimens for fracture toughness and properties and the microstructures of controlled rolled fatigue crack growth resistance measurements in different niobium-bearing HSLA plate steels, 53 orientations, L13 Metal matrix composites Fragmentation reactions in Al,O,-Mg metal matrix composites during structures obtained by mechanical fragmentation of glass prolonged heat treatment at 400, 500 and 600 °C, 149 plates, L1 Microstructural evolution mechanical properties and microstructural evolution of a Glass cobalt base alloy coating, 85 structures obtained by mechanical fragmentation of glass Molybdenum plates, L1 effect of molybdenum on the resistance to H,S of high sulphur Grain size microalloyed steels, 111 effect of grain size and intergranular stresses on the cyclic behaviour of a ferritic steel, 67 Nickel Graphite fracture behaviour of an aluminide coating on a single crystal pressure die cast graphite dispersed Al-Si-Mg alloy matrix nickel base superalloy, 19 composites, 93 Monte Carlo analysis of short-range order in nitrogen- strengthened Fe-Ni-Cr-N austenitic alloys, 103 Heat treatment Niobium reactions in Al,O,-Mg metal matrix composites during microstructural evolution and thermal stability of precipita- prolonged heat treatment at 400, 500 and 600 °C, 149 tion-strengthened Cu-8Cr-4Nb alloy, 167 Homogenization the effects of small titanium additions on the mechanical the effect of homogenization and precipitation treatments on properties and the microstructures of controlled rolled the extrudability and ambient-temperature mechanical niobium-bearing HSLA plate steels, 53 properties of aluminum alloy AA2024, 9 Nitrogen Hydrogen Monte Carlo analysis of short-range order in nitrogen- effect of molybdenum on the resistance to H,S of high sulphur strengthened Fe-Ni-Cr-N austenitic alloys, 103 microalloyed steels, 111 Oxygen Infiltration reactions in Al,O,-Mg metal matrix composites during effect of magnesium on mechanical properties of alumina- prolonged heat treatment at 400, 500 and 600 °C, 149 fiber-reinforced aluminum matrix composites formed by work hardening of mechanically alloyed Fe-Y,O, alloys, 1 pressure infiltration casting, 79 Intermetallics Plasma etching estimation of energy-dissipative process development during plasma etching of structural ceramics for microstructural crack propagation in an intermetallic alloy, L9 analysis, L5 18] Precipitation the effects of small titanium additions on the mechanical microstructural evolution and thermal stability of precipita- properties and the microstructures of controlled rolled tion-strengthened Cu-8Cr-4Nb alloy, 167 niobium-bearing HSLA plate steels, 53 the effect of homogenization and precipitation treatments on the irreversible deformation of a duplex stainless steel under the extrudability and ambient-temperature mechanical thermal cycling, 125 properties of aluminum alloy AA2024, 9 Stress effect of grain size and intergranular stresses on the cyclic behaviour of a ferritic steel, 67 Rapid solidification elastic stresses in anisotropic bicrystals, 43 microstructure in rapidly solidified Al-Ti alloys, 135 Sulphur Rolling effect of molybdenum on the resistance to H,S of high sulphur the effects of small titanium additions on the mechanical microalloyed steels, 111 properties and the microstructures of controlled rolled niobium-bearing HSLA plate steels, 53 Thermal cycling the irreversible deformation of a duplex stainless steel under Shape memory alloys thermal cycling, 125 elaboration and characterization of new low temperature Thermal stability shape memory Cu-Al-Be alloys, 119 microstructural evolution and thermal stability of precipita- Shearing tion-strengthened Cu-8Cr-4Nb alloy, 167 predicting slip behavior in alloys containing shearable and Titanium strong particles, 33 microstructure in rapidly solidified Al-Ti alloys, 135 Silicon the effects of small titanium additions on the mechanical pressure die cast graphite dispersed Al-Si-Mg alloy matrix properties and the microstructures of controlled rolled composites, 93 niobium-bearing HSLA plate steels, 53 Slip Transmission elements predicting slip behavior in alloys containing shearable and structure and properties of Fe-based nanocrystalline alloys strong particles, 33 containing a small amount of transition elements, L17 Steels Work hardening effect of grain size and intergranular stresses on the cyclic work hardening of mechanically alloyed Fe-Y,O, alloys, 1 behaviour of a ferritic steel, 67 effect of molybdenum on the resistance to H.S of high sulphur Yttrium microalloyed steels, 111 work hardening of mechanically alloyed Fe-Y,O, alloys, 1