Table Of ContentMaterials Science and Engineering, A148 (1991) 337 337
Author Index of Volume 148
Aksoy, S., 67 Hong, S. J., 189 Morton, H., 101
Alassoeur, P., 67 Huang, W., 197
Albertini, G., 211 Neite, G., 85
Anderson, I. E., 201 Inal, O. T., 115
Ocansey, P., 289
André, G., 211
Andrews, M., 289 Jacobson, D. L., 219 Olson, D. L., 1
Ozturk, T., 175
Jeng, S. M., 67
Berry, Jr.,G. L., 1
Perrin, M., 211
Biselli, C., 163 Kao, P. W., 189
Pink, E., 7
Khanna, A. S., 299
Poirier, D. R., 289
Cermak, J., 279 Kim, J.-T., 93
Poole, W. J., 175
King, A. H., 155
Chang, W. S., 145
Pyun, S.-I., 93
Kirtikar, A. S., 155
Chen, S., 145
Ko, Y. Y., 79
Choudhary, B. K., 267, 299 Raghavan, N. S., 307
Chyou, S. D., 241
Rustichelli, F., 211
Cliche, G., 319 Laggoun, A., 123
Copper, C. V., 231 Lai, J. K. L., 261 Sankara Rao, K. B., 253, 267
Lee, S.-M., 93
Sasikala, G., 253
Lu, B., 179
Dallaire, S.,319 Shen, P., 145
Lucke, K., 15
Shih, H. C., 241
Lukac, P., 7
Embury,J . D., 175 Shin, K.S., 219
Luo, A., 219
Engler, O., 15 Simpson, C., 53
Singh Raman, R. K., 299
Makkonen, L., 141
Figliola, R.S., 101
Mannan, S. L., 253, 267
Teillet,J. , 123
Fransen, T., 131
Matera, R., 211
Tian, J.-F., 45
Mathew, M. D., 253
Trojanova, Z., 7
Ganesan, S., 289 Matlock, D. K., 1
Geerdink, B., 131 Meletis, E. I., 197 Wan, C. C., 79
Gellings, P.J., 131 Merola, M., 211 Wang, Y., 25, 79
Gnanamoorthy, J. B., 299 Metin, E. S., 115 Wang, Z., 45, 53
Miele, P., 211
Haanappel, V. A. C., 131 Mielke, S., 85 Yang, J.-M., 67
Hamersky, M., 7 Mikkola, D. E., 25
Hao, Y., 45 Morris, D. G., 163 Zhang, R. J., 53
Hauet, A., 123 Morris, M. A., 33 Zheng, X., 179
© Elsevier Sequoia/Printed in The Netherlands
Materials Science and Engineering, A148 (1991) 339-342 339
Subject Index of Volume 148
Acid electrolytes Auger electron spectroscopy
electrochemical dissolution of nickel-42 in acid electro- X-ray photoelectron spectroscopy and Auger electron
lytes, 79 spectroscopy studies on the passivation behavior of
Additives plasma-nitrided low alloy steel in nitric acid, 241
pressureless sintering of aluminium nitride: effect of
concentration of additives and sintering conditions on Carbon
properties, 307 fatigue tractography of particulate-SiC-reinforced Al(A356)
Alloys cast alloy, 53
grain boundary self-diffusion of *'Cr and *’Fe in austenitic influence of carbon and nitrogen on the creep properties
Ni-Fe-Cr alloys, 279 of type 316 stainless steel at 873 K, 253
high temperature tensile properties of W-Re-ThO, alloys, mechanical properties of Al-SiC composites made by
219 resistance sintering of mechanically alloyed powders,
isothermal coarsening of dendritic equiaxial grains in 189
Al-15.6wt.%Cu alloy, 289 synthesis of TiC and (Ti,W)C in solvent metals, 319
mechanical properties of Al-SiC composites made by the fracture behavior of a directionally solidified
resistance sintering of mechanically alloyed powders, Fe-Cr-Mn-C superalloy, 231
189
the fracture behavior of a directionally solidified Ceramic
Fe-Cr-Mn-C superalloy, 231 microstructural development of zirconia-dispersed
the high temperature deformation of mechanically alloyed ceramic in the NiO-Al,O,-ZrO, system, 145
copper-based alloys, 163 Chromium
the role of the T, phase in the pre-exposure and hydrogen effect of thermal aging on the oxidation behaviour of
embrittlement of Al-Li-Cu alloys, 197 9wt.%Cr-I|wt.%Mo steel, 299
Aluminium grain boundary self-diffusion of *'Cr and *’Fe in austenitic
creep of Al-3wt.%Mg as measured with the incremental Ni-Fe-Cr alloys, 279
loading method, 7 high temperature low cycle fatigue properties of a thick-
fatigue fractography of _ particulate-SiC-reinforced section 9wt.%Cr- 1 wt.%Mo ferritic steel forging, 267
Al(A356) cast alloy, 53 the corrosion and mechanical behaviours of aluminide,
influence of the precipitation state on the cold rolling FeCrAlY and CoCrAlY coatings in aggressive environ-
texture in 8090 AI-Li material, 15 ments, 131
isothermal coarsening of dendritic equiaxial grains in the fracture behavior of a directionally solidified
Al-15.6wt.%Cu alloy, 289 Fe-Cr-Mn-C superalloy, 231
mechanical properties of Al-SiC composites made by Composites
resistance sintering of mechanically alloyed powders, fracture mechanisms of fiber-reinforced titanium alloy
189 matrix composites.
microstructural development of zirconia-dispersed Part IV: Low cycle fatigue, 67
ceramic in the NiO-Al,O,-ZrO, system, 145 Copper
pressureless sintering of aluminium nitride: effect of isothermal coarsening of dendritic equiaxial grains in
concentration of additives and sintering conditions on Al-15.6wt.%Cu alloy, 289
properties, 307 the deformation of Cu-W laminates, 175
structural analysis of a TiAl,+ZrO, particulate com- the high temperature deformation of mechanically alloyed
posite, 115 copper-based alloys, 163
the corrosion and mechanical behaviours of aluminide, the role of the T, phase in the pre-exposure and hydrogen
FeCrAlY and CoCrAlY coatings in aggressive environ- embrittlement of Al-Li—Cu alloys, 197
ments, 131 Corrosion
the role of the T, phase in the pre-exposure and hydrogen the corrosion and mechanical behaviours of aluminide,
embrittlement of Al-Li—Cu alloys, 197 FeCrAlY and CoCrAlY coatings in aggressive environ-
Aluminium alloys ments, 131
thermal expansion and dimensional stability of alumina Crack growth
fibre reinforced aluminium alloys, 85 predicting fatigue crack growth rates and threshold at low
Aluminium nitride temperatures, 179
pressureless sintering of aluminium nitride: effect of Crack propagation
concentration of additives and sintering conditions on influence of microcompositional gradients on stress corro-
properties, 307 sion crack propagation, |
© Elsevier Sequoia/Printed in The Netherlands
340
Crack tip Incremental loading
crack tip-dislocation loop interactions, 155 creep of Al-3wt.%Mg as measured with the incremental
Creep loading method, 7
creep and high temperature deformation of titanium Intergranular fracture surface
aluminide alloys: influence of a, phase distribution and analysis of the intergranular fracture surface by the Fourier
B, phase decomposition, 33 spectrum method, 45
creep of Al-3wt.%Mg as measured with the incremental Iron
loading method, 7 grain boundary self-diffusion of *'Cr and *’Fe in austenitic
influence of carbon and nitrogen on the creep properties Ni-Fe-Cr alloys, 279
of type 316 stainless steel at 873 K, 253 the corrosion and mechanical behaviours of aluminide,
FeCrAlY and CoCrAlY coatings in aggressive environ-
Deformation ments, 131
the deformation of Cu-W laminates, 175 the fracture behavior of a directionally solidified
the high temperature deformation of mechanically alloyed Fe-Cr-Mn-C superalloy, 231
copper-based alloys, 163 X-ray and *’Fe Mossbauer study of sputtered Fe-Zn
Dendrite spacing alloys, 123
primary dendrite spacing in constrained solidification, 141
Dimensional stability Laminates
thermal expansion and dimensional stability of alumina the deformation of Cu-W laminates, 175
fibre reinforced aluminium alloys, 85 Lithium
Dislocation loop influence of the precipitation state on the cold rolling
crack tip-dislocation loop interactions, 155 texture in 8090 AI-Li material, 15
the role of the T, phase in the pre-exposure and hydrogen
Elastic interaction embrittlement of Al-Li-Cu alloys, 197
crack tip-dislocation loop interactions, 155 Low cycle fatigue
Electrochemical dissolution fracture mechanisms of fiber-reinforced titanium alloy
electrochemical dissolution of nickel-42 in acid electro- matrix composites
lytes, 79 Part IV: Low cycle fatigue, 67
Fatigue Magnesium
Predicting fatigue crack gowth rates and threshold at low creep of Al-3wt.%Mg as measured with the incremental
temperatures, 179 loading method, 7
Fatigue fractography Manganese
fatigue fractography of particulate-SiC-reinforced Al(A356) the fracture behavior of a directionally solidified
cast alloy, 53 Fe-Cr-Mn-C superalloy, 231
Ferrite Mechanical behaviour
an empirical model to predict the transformation of 6- the corrosion and mechanical behaviours of aluminide,
ferrite in a niobium-stabilized austenitic weld metal FeCrAlY and CoCrAlY coatings in aggressive environ-
under non-isothermal conditions, 261 ments, 131
high temperature low cycle fatigue properties of a thick- Metals
section 9wt.%Cr-1wt.%Mo ferritic steel forging, 267 synthesis of TiC and (Ti,W)C in solvent metals, 319
Flow mechanisms Microcompositional gradients
flow mechanisms in high pressure gas atomization, 101 influence of microcompositional gradients on stress corro-
Fourier spectrum sion crack propagation, |
analysis of the intergranular fracture surface by the Fourier Microstructural development
spectrum method, 45 microstructural development of zirconia-dispersed ceram-
Fracture ic in the NiO-Al,O,-ZrO, system, 145
the fracture behavior of a directionally solidified
Fe-Cr-Mn-C superalloy, 231 Molybdenum
Fracture mechanisms effect of thermal aging on the oxidation behaviour of
fracture mechanisms of fiber-reinforced titanium alloy 9wt.%Cr- 1 wt.%Mo steel, 299
matrix composites high temperature low cycle fatigue properties of a thick-
Part IV: Low cycle fatigue, 67 section 9wt.%Cr-I|wt.%Mo ferritic steel forging, 267
Mossbauer study
High pressure gas atomization X-ray and °*’Fe Mossbauer study of sputtered Fe-Zn
flow mechanisms in high pressure gas atomization, 101 alloys, 123
High temperature deformation
creep and high temperature deformation of titanium Nickel
aluminide alloys: influence of a, phase distribution and electrochemical dissolution of nickel-42 in acid electro-
B., phase decomposition, 33 lytes, 79
Hydrogen grain boundary self-diffusion of °'Cr and *’Fe in austenitic
effects of phosphorus segregated at grain boundaries on Ni-Fe-Cr alloys, 279
stress corrosion crack initiation and propagation of microstructural development of zirconia-dispersed cera-
rotor steel in boiling 40wt.% NaOH solution, 93 mic in the NiO-Al,O,-ZrO, system, 145
341
Niobium Shock deformation
an empirical model to predict the transformation of 6- shock deformation of sapphire single crystals, 25
ferrite in a niobium-stabilized austenitic weld metal Silicon
under non-isothermal conditions, 261 fatigue fractography of particulate-SiC-reinforced Al(A356)
Nitrogen cast alloy, 53
influence of carbon and nitrogen on the creep properties mechanical properties of Al-SiC composites made by
of type 316 stainless steel at 873 K, 253 resistance sintering of mechanically alloyed powders,
189
Sintering
Oxidation
pressureless sintering of aluminium nitride: effect of
effect of thermal aging on the oxidation behaviour of
concentration of additives and sintering conditions on
9wt.%Cr- | wt.%Mo steel, 299
properties, 307
Oxygen
Sodium
effects of phosphorus segregated at grain boundaries on
effects of phosphorus segregated at grain boundaries on
stress corrosion crack initiation and propagation of
stress corrosion crack initiation and propagation of
rotor steel in boiling 40wt.% NaOH solution, 93
rotor steel in boiling 40wt.% NaOH solution, 93
high temperature tensile properties of W-Re-ThO, alloys,
Solidification
219
primary dendrite spacing in constrained solidification, 141
microstructural development of zirconia-dispersed
Solvents
ceramic in the NiO-Al,O,-ZrO, system, 145
synthesis of TiC and (Ti,W)C in solvent metals, 319
structural analysis of a TiAl,+ZrO, particulate com-
Steel
posite, 115
effect of thermal aging on the oxidation behaviour of
Owt.%Cr- | wt.%Mo steel, 299
Particulate composites high temperature low cycle fatigue properties of a thick-
structural analysis of a TiAl,+ZrO, particulate com- section 9wt.%Cr-1wt.%Mo ferritic steel forging, 267
posite, 115 influence of carbon and nitrogen on the creep properties
Passivation of type 316 stainless steel at 873 K, 253
X-ray photoelectron spectroscopy and Auger electron X-ray photoelectron spectroscopy and Auger electron
spectroscopy studies on the passivation behavior of spectroscopy studies on the passivation behavior of
plasma-nitrided low alloy steel in nitric acid, 241 plasma-nitrided low alloy steel in nitric acid, 241
Phase decomposition Stress corrosion crack initiate
creep and high temperture deformation of titanium alumi- effects of phosphorus segregated at grain boundaries on
nide alloys: influence of a, phase distribution and £, stress corrosion crack initiation and propagation of
phase decomposition, 33 rotor steel in boiling 40wt.% NaOH solution, 93
Phase distribution
creep and high temperture deformation of titanium alumi-
Thermal expansion
nide alloys: influence of a, phase distribution and /,
thermal expansion and dimensional stability of alumina
phase decomposition, 33
fibre reinforced aluminium alloys, 85
Phosphorus
Thermal fatigue
effects of phosphorus segregated at grain boundaries on
residual strain in a fusion reactor first-wall component
stress corrosion crack initiation and propagation of
subjected to thermal fatigue, 211
rotor steel in boiling 40wt.% NaOH solution, 93
Thorium
Plasma nitriding
high temperature tensile properties of W-Re-ThO, alloys,
X-ray photoelectron spectroscopy and Auger electron
219
spectroscopy studies on the passivaton behavior of
Titanium
plasma-nitrided low alloy steel in nitric acid, 241
fracture mechanisms of fiber-reinforced titanium alloy
Precipitation states
matrix composites
influence of the precipitation state on the cold rolling
Part IV: Low cycle fatigue, 67
texture in 8090 Al-Li material, 15
structural analysis of a TiAl,+ZrO, particulate com-
posite, 115
Residual strain synthesis of TiC and (Ti,W)C in solvent metals, 319
residual strain in a fusion reactor first-wall component Titanium aluminide alloys
subjected to thermal fatigue, 211 creep and high temperature deformation of titanium
Resistance sintering aluminide alloys: influence of a, phase distribution and
mechanical properties of Al-SiC composites made by B, phase decomposition, 33
resistance sintering of mechanically alloyed powders, Tungsten
189 high temperature tensile properties of W-Re-ThO, alloys,
Rhenium 219
high temperature tensile properties of W-Re-ThO, alloys, synthesis of TiC and (Ti,W)C in solvent metals, 319
219 the deformation of Cu-W laminates, 175
Sapphire single crystals X-ray photoelectron spectroscopy
shock deformation of sapphire single crystals, 25 X-ray photoelectron spectroscopy and Auger electron
spectroscopy studies on the passivation behavior of Zinc
plasma-nitrided low alloy steel in nitric acid, 241 X-ray and *’Fe Mossbauer study of sputtered Fe-Zn
alloys, 123
Zirconium
Yttrium microstructural development of zirconia-dispersed
the corrosion and mechanical behaviours of aluminide, ceramic in the NiO-Al,O,-ZrO, system, 145
FeCrAlY and CoCrAlY coatings in aggressive environ- structural analysis of a TiAl,+ZrO, particulate com-
ments, 131 posite, 115
