Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing 1991: Vol A132 Index

7 Pages·1991·1.8 MB·English

Materials Science and Engineering, A132 (1991) 287 287
Author Index of Volume 132
Akef, A., 245 Kallend, J.S., 1 Quan, M. X., 277
Kassner, M. E., 97
Banerjee, S., 203 Katardjiev, I. V., 231 Radmilovic, V., 171
Baram,J ., 119 Kocks, U. F,, 1 Ranganath, V.R., 153
Barry, P. E., 143 Kostorz, G., 267 Rao, P. P., 49
Belhadji, M., 273 Kumar, A. N., 153 Rollett, A. D., 1
Bevan, I. J., 231
Bowers,J. , 143 Lai,J.K.L.,L1 Saiter, J. M., 273
Byrne, J.G., 161 Lavernia, E. J., 119 Singh, R., 203
Lebaudy, P., 273 Skrotzki, W., 77
Lee,J . E., 195
Carter, G., 231
Case, E. D., 39 Lei, C. Y., 237 Takeyama, M., 61
Chiu, C.-C., 39 Libera, M., 107 Tangri, K., 49
Curreri, P. A., 195 Liebermann, R. C., 13, 23 Tewari, S. N., 195
Liu, C. T., 61 Thomas, G., 171
Liu, X., 13, 23
Darwish, F. A., L5
Louis, E., 135
Vander Sande, J. B., 107
Das, S. K., 171
Vautier, C., 273
Driver, J. H., 245
Maienschein,J . L., 143 Vijayakumar, M., 195
Dudley, M., 13, 23
McMuprphy, F., 143
Dutkiewicz, J., 267
McQueen, H. J., 97 Wan, C.-M., 161
Meyers, M. A., 257 Wang, J. T., 277
Earthman, J. C., 89
Wang, Y., 13, 23
Needleman, A., 31 Wayman, C. M., 237
Foitzik, A., 77 Nguyen, N. Q., 97 Wenk, H.-R., 1
Nobes, M. J., 231 Werner, E., 213
Gaffet, E., 181 Nutt, S. R., 31 Wu, S. P., 225
Garcia-Cordovilla, C., 135
Gatts, C., L5 Obrtlik, K., 67 Xue, X. M., 277
Graca, M. L., L5 Olson, G. B., 107
Grenet, J., 273 Yao, G.-D., 13, 23
Gutierrez, E., 119 Pak, J. S. L., 237 Yingkun, X., 83
Pandey, R. K., 153 Yu, L.-H., 257
Haasen, P., 77 Peng, T. C., 257
Helesic, J., 67 Pereira, L. C., L5 Zhang, L. D., 225
Henshall, G. A., 97 Polak, J., 67 Zhao, Z., 83
Hwang, K.-H., 161 Povirk, G. L., 31 Zhijian, S., 83

Materials Science and Engineering, A132 (1991) 289-292 289
Subject Index of Volume 132
Ageing Boron
the effect of ageing and creep on the impact properties of wetting characteristics and interfacial reaction of liquid
type 316 weld metals, L1 aluminium on hot-pressed boron nitride substrate, 277
Alloys
atomic ordering in Ti-V—-Al shape memory alloys, 237 Carbon
dendrite spacings in directionally solidified superalloy effect of microstructure on the mechanical properties of an
PWA-1480, 195 Al alloy 6061-SiC particle composite, 83
effect of microstructure on the mechanical properties of an microstructure of a-Al base matrix and SiC particulate
Al alloy 6061-SiC particle composite, 83 composites, 171
fracture toughness characterization of a weldment in a morphological and compositional changes of the carbides
microalloyed steel using resistance curves, 153 in Cr-Mo-V ferritic steel, 203
internal friction associated with formation and dissolution phase transformation in a duplex Fe-Mn-AlI-C alloy, 161
of metastable phase particles as grain boundaries in Cementite
Al-Mg alloys, 225 the growth of holes in plates of cementite, 213
on the tempered martensite embrittlement in AISI 4140 Ceramics
low alloy steel, LS elastic modulus determination of coating layers as applied
shock consolidation of Al-Li alloy powders, 257 to layered ceramic composites, 39
structure of martensite in Co-W alloys, 267 Chromium
Aluminium microstructure and mechanical properties of Laves-phase
a differential scanning calorimetry investigation of the alloys based on Cr,Nb, 61
effects of zinc and copper on solid state reactions in morphological and compositional changes of the carbides
Al-Zn-Mg-Cu alloys, 135 in Cr-Mo-V ferritic steel, 203
an analysis of the effect of residual stresses on deformation Coatings
and damage mechanisms in Al-SiC composites, 31 elastic modulus determination of coating layers as applied
atomic ordering in Ti-V-Al shape memory alloys, 237 to layered ceramic composites, 39
effect of microstructure on the mechanical properties of an Cobalt
Al alloy 6061-SiC particle composite, 83 structure of martensite in Co—W alloys, 267
internal friction associated with formation and dissolution Composites
of metastable phase particles as grain boundaries in an analysis of the effect of residual stresses on deformation
Al-Mg alloys, 225 and damage mechanisms in Al-SiC composites, 31
microstructure of a-Al base matrix and SiC particulate elastic modulus determination of coating layers as applied
composites, 171 to layered ceramic composites, 39
phase transformation in a duplex Fe-Mn-AlI-C alloy, 161 microstructure of a-Al base matrix and SiC particulate
precipitation and excess solid solubility in Mg-Al-Zr and composites, 171
Mg-Zn-Zr processed by spray atomization and deposi- Compositional changes
tion, 119 morphological and compositional changes of the carbides
shock consolidation of Al-Li alloy powders, 257 in Cr-Mo-V ferritic steel, 203
the effects of temperature and strain rate on extended Compression
ductility of aluminum, 97 orientation splitting of cube-oriented face-centred cubic
wetting characteristics and interfacial reaction of liquid crystals in plane strain compression, 245
aluminium on hot-pressed boron nitride substrate, 277 Copper
yielding and work hardening behaviour of titanium a differential scanning calorimetry investigation of the
aluminides at different temperatures, 49 effects of zinc and copper on solid state reactions in
Amorphous zones Al-Zn-Mg-Cu alloys, 135
identification of amorphous zones in the GeTeSb system, cyclic strain localization in polycrystalline copper at room
273 temperature and low temperatures, 67
Antimony the erosion of copper by reflected sandblasting grains, 231
identification of amorphous zones in the GeTeSb system, Crack growth
273 characterization of small crack growth in 12% CrMoV
steel under high temperature, low cycle fatigue condi-
tions, 89
Beryllium Creep
synthesis and properties of a low density, high porosity the effect of ageing and creep on the impact properties of
lithium hydride-beryllium hydride foam, 143 type 316 weld metals, L1
290
Chromium Interfacial reactions
characterization of small crack growth in 12% CrMoV wetting characteristics and interfacial reaction of liquid
steel under high temperature, low cycle fatigue condi- aluminium on hot-pressed boron nitride substrate, 277
tions, 89 Iron
Crystals phase transformation in a duplex Fe-Mn-AlI-C alloy, 161
orientation splitting of cube-oriented face-centred cubic
crystals in plane strain compression, 245
Lanthanum
Cyclic strain
high temperature transmission electron microscopy and
cyclic strain localization in polycrystalline copper at room
X-ray diffraction studies of twinning and the phase
temperature and low temperatures, 67
transition at 145 °C in LaGaO,, 13
synchrotron X-ray topography studies of twinning and the
Damage phase transition at 145 °C in LaGaO, single crystals, 23
an analysis of the effect of residual stresses on deformation Laves-phase alloys
and damage mechanisms in Al-SiC composites, 31 microstructure and mechanical properties of Laves-phase
Deformation alloys based on Cr,Nb, 61
an analysis of the effect of residual stresses on deformation
Layers
and damage mechanisms in Al-SiC composites, 31 elastic modulus determination of coating layers as applied
Dendrites to layered ceramic composites, 39
dendrite spacings in directionally solidified superalloy Lead
PWA-1480, 195 slip on {111} planes in lead sulphide, 77
Deposition Liquid metal droplets
precipitation and excess solid solubility in Mg-Al-Zr and heterogeneous nucleation of solidification in atomized
Mg-Zn-Zr processed by spray atomization and deposi- liquid metal droplets, 107
tion, 119
Lithium
Differential scanning calorimetry shock consolidation of Al-Li alloy powders, 257
a differential scanning calorimetry investigation of the synthesis and properties of a low density, high porosity
effects of zinc and copper on solid state reactions in lithium hydride-beryllium hydride foam, 143
Al-Zn-Mg-Cu alloys, 135
Magnesium
a differential scanning calorimetry investigation of the
Erosion
effects of zinc and copper on solid state reactions in
the erosion of copper by reflected sandblasting grains, 231
Al-Zn-Mg-Cu alloys, 135
internal friction associated with formation and dissolution
Fatigue of metastable phase particles as grain boundaries in
characterization of small crack growth in 12% CrMoV Al-Mg alloys, 225
steel under high temperature, low cycle fatigue condi- precipitation and excess solid solubility in Mg-Al-Zr and
tions, 89
Mg-Zn-Zr processed by spray atomization and deposi-
Fracture toughness
tion, 119
fracture toughness characterization of a weldment in a
Manganese
microalloyed steel using resistance curves, 153 phase transformation in a duplex Fe-Mn-AlI-C alloy, 161
Friction
Martensite
internal friction associated with formation and dissolution
structure of martensite in Co—-W alloys, 267
of metastable phase particles as grain boundaries in
Mechanical properties
Al-Mg alloys, 225 effect of microstructure on the mechanical properties of an
Al alloy 6061-SiC particle composite, 83
Gallium microstructure and mechanical properties of Laves-phase
alloys based on Cr,Nb, 61
high temperature transmission electron microscopy and
X-ray diffraction studies of twinning and the phase Microstructure
transition at 145 °C in LaGaO,, 13 effect of microstructure on the mechanical properties of
an Al alloy 6061-SiC particle composite, 83
synchrotron X-ray topography studies of twinning and the
microstructure and mechanical properties of Laves-phase
phase transition at 145 °C in LaGaO, single crystals, 23
Germanium alloys based on Cr,Nb, 61
identification of amorphous zones in the GeTeSb system, microstructure of a-Al base matrix and SiC particulate
273 composites, 171
Molybdenum
characterization of small crack growth in 12% CrMoV
Hydrogen
steel under high temperature, low cycle fatigue condi-
synthesis and properties of a low density, high porosity
tions, 89
lithium hydride-beryllium hydride foam, 1 43
morphological and compositional changes of the carbides
in Cr-Mo-V ferritic steel, 203
Impact properties Morphological changes
the effect of ageing and creep on the impact properties of morphological and compositional changes of the carbides
type 316 weld metals, L1 in Cr-Mo-V ferritic steel, 203
291
Niobium Solidification
microstructure and mechanical properties of Laves-phase heterogeneous nucleation of solidification in atomized
alloys based on Cr,Nb, 61 liquid metal droplets, 107
Nitrogen Solubility
wetting characteristics and interfacial reaction of liquid precipitation and excess solid solubility in Mg-Al-Zr and
aluminium on hot-pressed boron nitride substrate, 277 Mg-Zn-Zr processed by spray atomization and deposi-
tion, 119
Spray atomization
Orientation splitting
precipitation and excess solid solubility in Mg-Al-Zr and
orientation splitting of cube-oriented face-centred cubic
Mg-Zn-Zr processed by spray atomization and deposi-
crystals in plane strain compression, 245
tion, 119
Oxygen
Steel
high temperature transmission electron microscopy and
characterization of small crack growth in 12% CrMoV
X-ray diffraction studies of twinning and the phase
steel under high temperature, low cycle fatigue condi-
transition at 145 °C in LaGaO,, 13
tions, 89
synchrotron X-ray topography studies of twinning and the
fracture toughness characterization of a weldment in a
phase transition at 145 °C in LaGaQ,; single crystals, 23
microalloyed steel using resistance curves, 153
morphological and compositional changes of the carbides
Phase diagrams in Cr-Mo-V ferritic steel, 203
planetary ball-milling: an experimental parameter phase on the tempered martensite embrittlement in AISI 4140
diagram, 181 low alloy steel, L1
Phase particles Strain
internal friction associated with formation and dissolution orientation splitting of cube-oriented face-centred cubic
of metastable phase particles as grain boundaries in crystals in plane strain compression, 245
Al-Mg alloys, 225 the effects of temperature and strain rate on extended
Phase transformation ductility of aluminum, 97
phase transformation in a duplex Fe-Mn-AI-C alloy, 161 Sulphur
Phase transitions slip on {111} planes in lead sulphide, 77
high temperature transmission electron microscopy and
X-ray diffraction studies of twinning and the phase
transition at 145 °C in LaGaO,, 13 Tellurium
synchrotron X-ray topography studies of twinning and the identification of amorphous zones in the GeTeSb system,
phase transition at 145 °C in LaGaO, single crystals, 23 273
Powders Texture analysis
shock consolidation of Al-Li alloy powders, 257 operational texture analysis, |
Precipitation Titanium
precipitation and excess solid solubility in Mg-Al-Zr and atomic ordering in Ti- V-Al shape memory alloys, 237
Mg-Zn-Zr processed by spray atomization and deposi- yielding and work hardening behaviour of titanium
tion, 119 aluminides at different temperatures, 49
Transmission electron microscopy
high temperature transmission electron microscopy and
Residual stresses
X-ray diffraction studies of twinning and the phase
an analysis of the effect of residual stresses on deformation
transition at 145 °C in LaGaO,, 13
and damage mechanisms in Al-SiC composites, 31
Tungsten
Resistance curves
structure of martensite in Co-W alloys, 267
fracture toughness characterization of a weldment in a
microalloyed steel using resistance curves, 153
Vanadium
Sandblasting atomic ordering in Ti- V-Al shape memory alloys, 237
the erosion of copper by reflected sandblasting grains, 231 characterization of small crack growth in 12% CrMoV
Shock steel under high temperature, low cycle fatigue condi-
shock consolidation of Al-Li alloy powders, 257 tions, 89
Silicon
an analysis of the effect of residual stresses on deformation
and damage mechanisms in Al-SiC composites, 31 Weld metals
effect of microstructure on the mechanical properties of an the effect of ageing and creep on the impact properties of
Al alloy 6061 -SiC particle composite, 83 type 316 weld metals, L1
microstructure of a-Al base matrix and SiC particulate Weldment
composites, 171 fracture toughness characterization of a weldment in a
Solid state reactions microalloyed steel using resistance curves, 153
a differential scanning calorimetry investigation of the Wetting
effects of zinc and copper on solid state reactions in wetting characteristics and interfacial reaction of liquid
Al-Zn-Mg-Cu alloys, 135 aluminium on hot-pressed boron nitride substrate, 277
292
Work hardening Yielding
yielding and work hardening behaviour of titanium yielding and work hardening behaviour of titanium
aluminides at different temperatures, 49 aluminides at different temperatures, 49
X-ray diffraction Zinc
high temperature transmission electron microscopy and a differential scanning calorimetry investigation of the
X-ray diffraction studies of twinning and the phase effects of zinc and copper on solid state reactions in
transition at 145 °C in LaGaO,, 13 Al-Zn-Mg-Cu alloys, 135