Materials Science & Engineering A, Structural Materials: Properties, Microstructure and Processing 1991 - 1992: Vol A149 Index

6 Pages·1.5 MB·English

Materials Science and Engineering, A149 (1992) 271
Author Index of Volume 149
Adrianova, M. P., 121 Kamat, S. V., L1 Ranganath, S., 253
Altounian, Z., L5 Kashyap, B. P., L13 Ranganathan, S., 231
Aritomi, N., 41 Krotz, P. D., 225 Rigney, J. D., 143
Kryukova, G.N., 121
Bhanu Sankara Rao, K., L9 Sadykov, V. A., 121
Brooks, J. A., 65 LEspérance, G., 203 Sakuma, T., 59
Le Caer, G., 135 Salem, J. A., 259
Sandhya, R., L9
Chang, S. T., 129 Lewandowski,J . J., 143
Sato, K., 41
Chen, B. Y., 195 Litvak, G.S., 121
Shen, P., 217
Cheng,J . X., 195 Liu, H.-H., 217
Shi, Y. W., 199
Choi, S. R., 259 Luck, R., 111
Chou, C.-C., 95 Shueh, Y., 221
Shuravljova, L. J., 517
Chou, C. C., 73
Ciha, K., 105 Machova, A., 153 Shute, C. J., 167
Malakondaiah, G., L1 Smith,J . F., 111
Cohen, J. B., 167
Mannan, S. L., L9
Solovyeva, L. P., 121
Mao, M., L5
St-Laurent, S., 203
Deevi, S. C., 241
Matteazzi, P., 135 Stoloff, N.S., 19
Dey, R. M., 173 Mecking, H., 29
Stransky, K., 105
Million, B., 105 Subrahmanyam, J., 253
Estrin, Y., 29 Miyahara, Y., 19
Eswara Prasad, N., L1 Mohan Rao, M., 231 Takasugi, T., 183
Mondal, D. K., 177
Tangri, K., L13
Faudot, F., 85 Monzen, R., 53 Tsujimoto, T., 41
Fint, J. A., 225 Moni, T., 53 Tsybulya, S. V., 121
Murty, B. S., 231
Valsan, M., L9
Gaffet, E., 85
Ogawa, K., 41 Vijayakumar, M., 253
Garrison Jr., W. M., 65
Osipov, V. V., L17
Hanada, S., 183 Ostroushko, A. A., L17 Watanabe, S., 183
Wayman, C. M., 73, 95
Harmelin, M., 85
Weng, B. J., 129
Honma, K., 41 Paton, N. E., 225
Hsu, S. E., 129 PaviovskyJ,. , 105
Yang, F.-S., 217
Hsueh, C.-H., 1, 11 Predel, B., 111
Yang, K., 129
Yoshizawa, Y.-I., 59
Jiang, Q., 111 Quadfasel, U., 29 Yuen, J. L., 225
© 1992 - Elsevier Sequoia. All rights reserved
Materials Science and Engineering, A149 (1992) 273-276 273
Subject Index of Volume 149
Acicular ferrite effect of grain size on the microstructure and mechanical
effects of chemistry, density and size distribution of inclusions properties of aC-Mn-V dual-phase steel, 173
on the nucleation of acicular ferrite of C-Mn steel shielded- effects of chemistry, density and size distribution of inclusions
metal-arc-welding weldments, 203 on the nucleation of acicular ferrite of C-Mn steel shielded-
Alloys metal-arc-welding weldments, 203
aging of Au-Fe alloys and microstructure evolution, 73 high cycle fatigue behavior of Fe-Cr-Mn-C and Ni-Mo-Al
C, and fractal phase transformation in the shape memory aligned eutectics, 19
alloy Ni-52Ti, 111 reduction of haematite with carbon by room temperature ball
crystal-to-amorphous phase transition induced by mechanical milling, 135
alloying in the Ge-Si system, 85 Casting
electron diffraction investigation of diffuse reflections in combustion-assisted synthesis of Ti-TiB-TiC composite via
Au-Fe alloys, 95 the casting route, 253
comparison of mode I and mode II fracture toughness of an Ceramics
8090 AI-Li alloy, L1 structure and properties of Si,;N,-SiO, ceramics using an
morphology of a, phase in y-TiAlI-base alloy ingots, 41 organic precursor, 129
Alumina Chromium
grain growth acceleration during high temperature deforma- high cycle fatigue behavior of Fe-Cr-Mn-C and Ni-Mo-Al
tion in high purity alumina, 59 aligned eutectics, 19
Aluminium Cobalt
continuous and cyclic stress relaxation in aluminium, 29 some special properties of La, _,Sr,-CoO, _, films fabricated
fracture toughness of monolithic nickel aluminide intermetal- by the spray pyrolysis method, L17
lics, 143 Combustion
comparison of mode I and mode II fracture toughness of an combustion-assisted synthesis of Ti-TiB-TiC composite via
8090 AI-Li alloy, L1 the casting route, 253
morphology of a, phase in y-TiAl-base alloy ingots, 41 diffusional reactions in the combustion synthesis of MoSi,,
stress relaxaton in Al-Cu thin films, 167 241
the temperature and orientation dependence of tensile defor- Composites
mation and fracture in NiAI single crystals, 183 interfacial debonding and fiber pull-out stresses of fiber-
Amorphization reinforced composites. Part V. With a viscous interface, 1
solid state amorphization in binary Ti-Ni, Ti-Cu and interfacial debonding and fiber pull-out stresses of fiber-
ternary Ti-Ni-—Cu system by mechanical alloying, 231 reinforced composites. Part VI. Interpretation of fiber pull-
Austenite
out curves, | 1
carbon redistribution between an austenitic cladding and a Continuous stress
ferritic steel for pressure vessels of a nuclear reactor, 105 continuous and cyclic stress relaxation in aluminium, 29
the thermal and mechanical stability of austenite in the low Copper
carbon martensitic steel PH 13-8, 65 effect of thermal aging on Cu-Nb microcomposites, 225
Avrami exponent solid state amorphization in binary Ti-Ni, Ti-Cu and ternary
accurate determination of the Avrami exponent in phase Ti-Ni-Cu system by mechanical alloying, 231
transformations, L5 stress relaxation in Al—Cu thin films, 167
Crack growth
slow crack growth of indent cracks in glass with and without
Ball milling applied stress, 259
reduction of haematite with carbon by room temperature ball Cracks
milling, 135 slow crack growth of indent cracks in glass with and without
Base metal applied stress, 259
high temperature, low cycle fatigue behaviour of AISI type Crystals
316LN base metal, 316LN-316 weld joint and 316 all- crystal-to-amorphous phase transition induced by mechanical
weld metal, L9 alloying in the Ge-Si system, 85
Boron the temperature and orientation dependence of tensile defor-
combustion-assisted synthesis of Ti-TiB-TiC composite via mation and fracture in NiAI single crystals, 183
the casting route, 253 Cyclic stress
continuous and cyclic stress relaxation in aluminium, 29
Carbon
carbon redistribution between an austenitic cladding and a
ferritic steel for pressure vessels of a nuclear reactor, 105 Debonding
combustion-assisted synthesis of Ti-TiB-TiC composite via interfacial debonding and fiber pull-out stresses of fiber-
the casting route, 253 reinforced composites. Part V. With a viscous interface, 1
© 1992 - Elsevier Sequoia. All rights reserved
274
Deformation Goethite
grain growth acceleration during high temperature deforma- effect of heat treatment on microstructure evolution of OAssSOEeER SnEe LES Rt D
tion in high purity alumina, 59 haematite derived from synthetic goethite, 121
Diffuse reflections Gold eenaer s
electron diffraction investigation of diffuse reflections in aging of Au-Fe alloys and microstructure evolution, 73
Au-Fe alloys, 95 electron diffraction investigation of diffuse reflections in
Diffusion Au-Fe alloys, 95
diffusional reactions in the combustion synthesis of MoSi,, Grain boundary sliding
241 relaxation of elastic distortion caused by particle-blocked
Dual-phase steel grain boundary sliding, 53
effect of grain size on the microstructure and mechanical Grain growth
properties of aC-Mn-V dual-phase steel, 173 grain growth acceleration during high temperature deforma-
Ductility tion in high purity alumina, 59
the effect of stress state on the ductility and the critical extent grain growth behaviour of type 316L stainless steel, L13
of void growth in nodular cast iron, 195 Grain size
effect of grain size on the microstructure and mechanical
properties of aC-Mn-V dual-phase steel, 173
Elastic distortion
relaxation of elastic distortion caused by particle-blocked
grain boundary sliding, 53 Haematite
Electron diffraction effect of heat treatment on microstructure evolution of
haematite derived from synthetic goethite, 121
electron diffraction investigation of diffuse reflections in
Au-Fe alloys, 95 reduction of haematite with carbon by room temperature ball
Enamel-steel interface milling, 135
microstructure of the enamel-steel interface: cross-sectional Heat treatment
TEM and metallographic studies, 217 effect of heat treatment on microstructure evolution of
Eutectics haematite derived from synthetic goethite, 121
high cycle fatigue behavior of Fe-Cr-Mn-C and Ni-Mo-Al
aligned eutectics, 19
Impact loading
molecular dynamic simulation of microcrack initiation by
impact loading, 153
Fatigue
Interfaces
high cycle fatigue behavior of Fe-Cr-Mn-C and Ni-Mo-Al interfacial debonding and fiber pull-out stresses of fiber-
aligned eutectics, 19
reinforced composites. Part V. With a viscous interface, 1
high temperature, low cycle fatigue behaviour of AISI type interfacial debonding and fiber pull-out stresses of fiber-
316LN base metal, 316LN-316 weld joint and 316 all- reinforced composites. Part VI. Interpretation of fiber pull-
weld metal, L9
out curves, 11
Fibre-reinforcement
Intermetallics
interfacial debonding and fiber pull-out stresses of fiber-
fracture toughness of monolithic nickel aluminide intermetal-
reinforced composites. Part V. With a viscous interface, 1
lics, 143
interfacial debonding and fiber pull-out stresses of fiber-
Iron
reinforced composites. Part VI. Interpretation of fiber pull-
aging of Au-Fe alloys and microstructure evolution, 73
out curves, 11
electron diffraction investigation of diffuse reflections in
Fibres
Au-Fe alloys, 95
interfacial debonding and fiber pull-out stresses of fiber-
high cycle fatigue behavior of Fe-Cr-Mn-C and Ni-Mo-Al
reinforced composites. Part V. With a viscous interface, 1
aligned eutectics, 19
interfacial debonding and fiber pull-out stresses of fiber-
the effect of stress state on the ductility and the critical extent
reinforced composites. Part VI. Interpretation of fiber pull-
of void growth in nodular cast iron, 195
out curves, 11
Films
some special properties of La, _,Sr,-CoO, _, films fabricated Lanthanum
by the spray pyrolysis method, L17 ;
some special properties of La, _,Sr,-CoQ, _, films fabricated
Fracture by the spray pyrolysis method, L17
comparison of mode I and mode II fracture toughness of an Lithium
8090 Al-Li alloy, L1 comparison of mode I and mode II fracture toughness of an
Fracture toughness 8090 Al-Li alloy, L1
fracture toughness of monolithic nickel aluminide intermetal-
lics, 143
Manganese
effect of grain size on the microstructure and mechanical
Germanium properties of aC-Mn-V dual-phase steel, 173
crystal-to-amorphous phase transition induced by mechanical effects of chemistry, density and size distribution of inclusions
alloying in the Ge-Si system, 85 on the nucleation of acicular ferrite of C-Mn steel shielded-
Glass metal-arc-welding weldments, 203
slow crack growth of indent cracks in glass with and without high cycle fatigue behavior of Fe-Cr-Mn-C and Ni-Mo-Al
applied stress, 259 aligned eutectics, 19
Martensite Phase transformations
the thermal and mechanical stability of austenite in the low C, and fractal phase transformation in the shape memory
carbon martensitic steel PH 13-8, 65 alloy Ni-52Ti, 111
Mechanical alloying Phase transitions
crystal-to-amorphous phase transition induced by mechanical crystal-to-amorphous phase transition induced by mechanical
alloying in the Ge-Si system, 85 alloying in the Ge-Si system, 85
solid state amorphization in binary Ti-Ni, Ti-Cu and ternary
Ti-Ni-Cu system by mechanical alloying, 231
Silicon
Mechanical stability
crystal-to-amorphous phase transition induced by mechanical
the thermal and mechanical stability of austenite in the low
alloying in the Ge-Si system, 85
carbon martensitic steel PH 13-8, 65
diffusional reactions in the combustion synthesis of MoSi,,
Metallographic studies
241
microstructure of the enamel-steel interface: cross-sectional
structure and properties of Si,;N,-SiO, ceramics using an
TEM and metallographic studies, 217
organic precursor, 129
Microcomposites
Spray pyrolysis method
effect of thermal aging on Cu-Nb microcomposites, 225
some special properties of La, _,Sr,-CoO,_, films fabricated
Microcrack
by the spray pyrolysis method, L17
molecular dynamic simulation of microcrack initiation by
Stainless steel
impact loading, 153
grain growth behaviour of type 316L stainless steel, L13
Microstructure
Steel
effect of grain size on the microstructure and mechanical
carbon redistribution between an austenitic cladding and a
properties of aC-Mn-V dual-phase steel, 173
ferritic steel for pressure vessels of a nuclear reactor, 105
Molecular dynamic simulation
effects of chemistry, density and size distribution of inclusions
molecular dynamic simulation of microcrack initiation by
on the nucleation of acicular ferrite of C-Mn steel shielded-
impact loading, 153
metal-arc-welding weldments, 203
Molybdenum
the thermal and mechanical stability of austenite in the low
diffusional reactions in the combustion synthesis of MoSi,,
carbon martensitic steel PH 13-8, 65
241
Stress
interfacial debonding and fiber pull-out stresses of fiber-
Nickel
reinforced composites. Part V. With a viscous interface, |
C, and fractal phase transformation in the shape memory
interfacial debonding and fiber pull-out stresses of fiber-
alloy Ni-52Ti, 111
reinforced composites. Part VI. Interpretation of fiber pull-
fracture toughness of monolithic nickel aluminide intermetal-
out curves, | 1
lics, 143
slow crack growth of indent cracks in glass with and without
solid state amorphization in binary Ti-Ni, Ti-Cu and ternary
applied stress, 259
Ti-Ni-Cu system by mechanical alloying, 231
Stress relaxation
the temperature and orientation dependence of tensile defor-
stress relaxation in Al-Cu thin films, 167
mation and fracture in NiAI single crystals, 183
Stress state
Niobium
the effect of stress state on the ductility and the critical extent
effect of thermal aging on Cu-Nb microcomposites, 225
of void growth in nodular cast iron, 195
Nitrogen
Strontium
structure and properties of Si,;N,-SiO, ceramics using an
some special properties of La, _,Sr,-CoO,_, films fabricated
organic precursor, 129
by the spray pyrolysis method, L17
Nuclear reactor
Synthesis
carbon redistribution between an austenitic cladding and a
combustion-assisted synthesis of Ti-TiB-TiC composite via
ferritic steel for pressure vessels of a nuclear reactor, 105
the casting route, 253
Nucleation
diffusional reactions in the combustion synthesis of MoSi,,
effects of chemistry, density and size distribution of inclusions
245
on the nucleation of acicular ferrite of C-Mn steel shielded-
metal-arc-welding weldments, 203
Temperature
Organics high temperature, low cycle fatigue behaviour of AISI type
structure and properties of Si,N,-SiO, ceramics using an 316LN base metal, 316LN-316 weld joint and 316 all-
organic precursor, 129 weld metal, L9
Orientation the temperature and orientation dependence of tensile defor-
the temperature and orientation dependence of tensile defor- mation and fracture in NiAI single crystals, 183
mation and fracture in NiAI single crystals, 183 Tensile deformation
Oxygen the temperature and orientation dependence of tensile defor-
some special properties of La, _,Sr,-CoO, _,, films fabricated mation and fracture in NiAI single crystals, 183
by the spray pyrolysis method, L17 . Thermal aging
structure and properties of Si,;N,-SiO, ceramics using an effect of thermal aging on Cu-Nb microcomposites, 225
organic precursor, 129 Thermal stability
the thermal and mechanical stability of austenite in the low
Phase transformation carbon martensitic steel PH 13-8, 65
accurate determination of the Avrami exponent in phase Thin films
transformations, L5 stress relaxation in Al-Cu thin films, 167
276
Titanium properties of aC-Mn-V dual-phase steel, 173
combustion-assisted synthesis of Ti-TiB-TiC composite via Void growth
the casting route, 253 the effect of stress state on the ductility and the critical extent
C, and fractal phase transformation in the shape memory of void growth in nodular cast iron, 195
alloy Ni-52Ti, 111
morphology of a, phase in y-TiAI-base alloy ingots, 41
solid state amorphization in binary Ti-Ni, Ti-Cu and ternary
eTPhOR esE nT AT S
Ti-Ni-Cu system by mechanical alloying, 231 Weld
Transmission electron microscopy effects of chemistry, density and size distribution of inclusions
microstructure of the enamel-steel interface: cross-sectional on the nucleation of acicular ferrite of C-Mn steel shielded-
TEM and metallographic studies, 217 metal-arc-welding weldments, 203
high temperature, low cycle fatigue behaviour of AISI type
Vanadium 316LN base metal, 316LN-316 weld joint and 316 all-
effect of grain size on the microstructure and mechanical weld metal, L9