Materials, Computer Engineering and Education Technology (MCEET 2020)

391 Pages·2021·34.667 MB·English

by  Abdel-Badeeh Mohamed Salem, Sergei Gorlatch

Materials, Computer Engineering and Education Technology

Preface

2020 International Conference on Materials, Computer Engineering and Education Technology
(MCEET 2020) was held in Sanya, China, during Dec. 19-20, 2020. MCEET 2020 was sponsored
by Modern International Green Culture Communication Association (MIGCCA), and the
conference proceeding published by Trans Tech Publications Ltd. MCEET 2020 provided an
excellent international forum for sharing knowledge and results in materials science, machinery
design, robotics and mechatronics, computer engineering, information technologies, and education.
The aim of the conference was to provide a platform to the global researchers and practitioners
from both academia as well as industry to meet and share cutting-edge development in the fields.
All the accepted papers were subjected to strict peer-reviewing by 2–6 expert reviewers. We hope
this book will provide the readers not only a broad overview of the latest research results, and give
the readers a valuable summary and reference in these fields.
MCEET 2020 Organizing Committees would like to express our sincere appreciation to all
authors, speakers, and participants of this conference for their contributions to this book. We would
like to extend our thanks to all the reviewers for their constructive comments. Especially, we would
like to thank the organizing committee for their hard work.

MCEET 2020 Organizing Committee
Committees

Honorary Chair:
Prof. Abdel-Badeeh Mohamed Salem, Ain Shams University, Egypt

General Chair:
Prof. Sergei Gorlatch, University of Muenster, Germany

Committee Chair Members:
Prof. Philip T. Moore, Lanzhou University, China/Shandong Normal University, China
Prof. Hong Lin, University of Houston-Downtown, USA
Prof. Fusheng Li, University of Electronic Science and Technology of China

Committee member:
Prof. Caner Ozdemir, Mersin University, Turkey
Prof. Xing-Gang Yan, University of Kent, UK
Prof. Krzysztof Gdawiec, University of Silesia, Poland
Dr. Jong-Ha Lee, Keimyung University, South Korea
Prof. Valerii S. Sytnikov, Odessa National Polytechnic University, Ukraine
Prof. Krit Salahddine, Ibn Zohr University, Morocco
Dr. Ong Lee-Yeng, Multimedia University, Malaysia
Prof. José M. Molina, Carlos III University of Madrid, Spain
Prof. Wenjie Zhang, Minnan Normal University, China
Prof. Mohammad Abu Yousuf, Jahangirnagar University, Bangladesh
Prof. Wan-Jung Chang, Southern Taiwan University of Science and Technology, Taiwan, China
Dr. Yang Song, University of North Carolina Wilmington, USA
Prof. Mwaffaq Otoom, Yarmouk University, Jordan
Prof. Subarna Shakya, Tribhuvan University, Nepal
Prof. Ambuj Kumar Agarwal, RNB Global University, India
Prof. Zoran Stevic, University of Belgrade, Serbia
Prof. Andre Luiz Przybysz, Universidade Tecnological Federal do Parana (UTFPR), Brasil
Dr. Bhupendra Gupta, PDPM Indian Institute of Information Technology, India
Prof. Nurbek P. Saparkhojayev, Akhmet Yassawi International Kazakh-Turkish University

International Reviewers:
Dr. Hossein Roshan, Shiraz University, Iran
Dr. Jatinderkumar R. Saini, Symbiosis Institute of Computer Studies and Research (SICSR), India
Dr. Reza Goldaran, Girne American University (GAU) in North Cyprus, Turkey
Dr. Ramakrishna Pramod, Amrita School of Engineering, Bengaluru Campus, India
Mr. S. Karthik, Jain (Deemed to be University) Bengaluru, India
Dr. Mahdieh Darroudi, Turkish-German University, Turkey
Dr. Ilgiz Gareev, Bashkir State Medical University, Russia
Dr. Sadegh Ghorbanhosseini, BU-Ali Sina University, Iran
Dr. Michał Kaczmarek, Lodz University of Technology, Poland
Dr. Giuseppe Ciaburro, University of Campania, Italy
Dr. Amir Mohammad Hajisadeghi, Amirkabir University of Technology, Iran
Dr. Dmitriy V. Ivanov, Samara State University of Transport, Russia
Dr. Shankar Sehgal, Panjab University, India
Dr. Mario Versaci, Mediterranea University of Reggio Calabria, Italy
Dr. Lilia Tightiz, Sejong University, South Korea
Dr. G. Thippa Reddy, Vellore Institute of Technology, India
Dr. Abhishek Choubey, Sreenidhi Institute of Technology Hyderabad, India
Dr. Alpay Tamer Erturk, Kocaeli University, Turkey
Dr. Ahmad Aminzadeh, Université du Québec à Rimouski, Canada
Dr. M. Parhizkar Yaghoobi, Shahrood University of Technology, Iran
Dr. Krzysztof Gdawiec, University of Silesia, Poland
Dr. Sara Tarashi, Amirkabir University of Technology, Iran
Dr. Mehdi Safari, Arak University of Technology, Iran
Dr. Mostafa Haghi Kashani, Islamic Azad University, Iran
Dr. Rajesh Agarwal, SRM Institute of Science & Technology, India
Dr. Vijay Anant Athavale, Panipat Institute of Engineering & Technology, India
Dr. Elahe Ahmadi Feijani, Bu-Ali Sina University, Iran
Dr. Soumyadeep Sinha, Madanapalle Institute of Technology & Science, India
Dr. Guttikonda Manohar, National Institute of Technology Silchar Assam, India
Dr. Ahmed Mohamed Taha Abdelhamid Alfa, Alexandria University, Egypt
Dr. Pradeep D., Christian College of Engineering & Technology, India
Dr. Cosimo Ieracitano, University Mediterranea of Reggio Calabria, Italy
Dr. Yasser Nabil Elhenawy, Port Said University, Egypt
Dr. Kulvinder Singh, Maharaja Agrasen University, India
Dr. Haowen Xu, Oak Ridge National Laboratory, USA
Dr. Ali Akbari, Urmia University of Medical Science, Iran
Dr. Sivakumar R., Vellore Institute of Technology, India
Dr. P. Murali Krishna, National Institute of Food Technology and Entrepreneurship and
Management, India
Dr. Daria Becker-Pestka, WSB University in Gdansk, Poland
Dr. Shridhar Devamane, Mfiflex Technologies, India
Dr. Emine Baş, Selcuk University /Kulu Vocational School, Turkey
Dr. Avinash Sharma, Maharishi Markandeshwar University, India
Dr. Fatma Unal, Hitit University, Turkey
Dr. Deivanathan R., VIT University, India
Dr. M. Sujith, IFET College of Engineering, India
Dr. Archana Mishra, Indian Institute of Technology, India
Dr. Farkhanda Afzal, National University of Science and Technology, Pakistan
Table of Contents
Preface
Chapter 1: Characterization and Processing Technologies
Ion Gel-Coated Graphene Transistor for Ethanol Gas Sensing
D.S. Liu, J. Wu and Z.M. Wang 3
Effect of Processing Parameters on Mechanical Properties of Al7175/Boron Carbide (B4C)
Composite Fabricated by Powder Metallurgy Techniques
G. Manohar, K.M. Pandey and S.R. Maity 8
Defects Formation and Microstructure Characterization of Friction Stir Welded Al 6061
Plates
M. Ahmadi, D. Rahmatabadi, M. Pahlavani, A. Aminzadeh and J. Marzbanrad 17
Investigations on Physical and Mechanical Characterization of the Joints Fabricated
through Microwave Hybrid Heating Method
P. Singh, D.R. Prajapati and S. Sehgal 25
Fabrication of Chemically Linked PEGylated Prodrugs for Hydrogel Carriers
T.L. Wang 42
Investigation of the Optimal Heat Treatment of As-Cast Al-5.7Si-2Cu-0.3Mg Aluminium
Alloys
M.A. Abdelgnei, M.Z. Omar, M.J. Ghazali and M.N. Mohammed 48
Enhancement of Fatigue Life in St37 Steels by Carburizing Process
J. Joudaki and M. Safari 59
Investigation on Surface Roughness of Drilled Holes in Nanoparticle Filled Polymer Matrix
Composites
R. Pramod, S. Basavarajappa and G.B. Veeresh Kumar 68
Chapter 2: Measurements and Computational Procedures in Materials
Science
Using Iterative Discrete Wavelet Transform to Improve Trace Element Analysis by XRF
Spectrometer
Q. Ma, L. Liu, F.S. Li and Y.C. Zhao 79
An Improved Iterative Polynomial Fitting Algorithm for Baseline Correction in X-Ray
Spectrum
X.Y. Jiang, Q.Y. Wang, M.Q. Xu and J. Hao 90
Study on LOD of Trace Elements by XRF Analysis Using BP & Adaboost and PLS Methods
W.Q. Yang, X. Lu, F.S. Li and Y.C. Zhao 99
On the Rapid Generation of Complete XRF Spectra for Material Analysis from
Fundamental Parameters
J.S. Ma, F.S. Li and Y.C. Zhao 110
A Numerical Investigation of a Single-Shot Impact Effects on Plastic Deformation of
Titanium Alloys
E. Yarar and A.T. Erturk 119
The Extreme Value Distribution and Application of Decarburization of Piston Rod
J.Z. Chen and G.P. Bi 125
Chapter 3: Design and Calculations in Mechanical Engineering
Non-Rigid Rotating Motion Effect on Creep Behavior for Infinite Cylinders under
Thermomechanical Loading
H. Seddighi, M. Parhizkar Yaghoobi and M. Ghannad 137
Crack Identification of Curved-Elements Using Wavelet Packet
R. Goldaran and M. Kouhdaragh 144
b Materials, Computer Engineering and Education Technology
Research on the Positioning Method of Single-Phase to Earth Fault in Distributed
Distribution Network
S.Q. Zhao, R.J. Cen and C.Q. Shi 151
Chapter 4: Robotics and Mechatronics
Transfer Function Coefficients Calculation of the High Pass Frequency-Dependent Second-
Order Components Using Special Phase Frequency Response Values
H. Ukhina, I. Afanasyev, V. Sytnikov, O. Streltsov and P. Stupen 161
Research on Digital Signal Processing of Wireless Anti-Jamming Data Link Node Based on
FPGA
Y.M. Cheng, T.Y. Li and Q. Xu 167
Arduino Based Footboard Accident Prevention System for Electric Locomotives
N. Sivanantham, A. Dinakaran and M. Sujith 172
A New Platform for Radio Astronomy Science Education
G.P. Yang, L. Dong, L.S. He, F.X. Shen, B. Tian and S.Y. Li 179
Influence of Permanent Magnets Installation Approach on the Torque of а Magneto-
Rheological Disk Brake
I.A. Frolov, A.A. Vorotnikov, S.V. Bushuev, E.A. Melnichenko and Y.V. Poduraev 184
Design and Analysis of Pneumatic Bending Actuator Used in Soft Robotics
X.D. Wang, H.W. Chen, L. Wang, W. Zhou and Y.Q. Li 194
Design and Application of Galinstan Liquid Metal Fully Flexible Angular Displacement
Sensor
H.W. Chen, X.D. Wang, L. Wang, W. Zhou and Y.Q. Li 202
Research on Strain Transfer of Beam Sensor Based on Ansys Workbench
B. Li, X.J. Zuo and X. Gao 211
Research on Electric Field Simulation of Ring Capacitance Sensor Based on Finite Element
Method
H.L. Wang and C.L. Cai 221
Chapter 5: Computer Engineering, Communication and Applied
Information Technologies
An Intelligent Modeling Methodology and the Integrated Monitoring and Early Warning
System for the Escalators by Using BIM Technology
Y.W. Zhou, W.M. Feng and L.P. Chen 231
A Promising Hardware Accelerator with PAST Adder
A. Choubey and S.B. Choubey 241
Research on Small-World Network Communication of Public Sentiment by Self-Media
Based on Energy Model
H.Z. Zhou and X.W. Li 249
Urdu Sign Language Reorganization via Artificial Neural Networks
M. Yasir, C. Li and M.A. Malik 263
Exploration of Intelligent Development of Medical Heritage
J.H. Li, Y.H. Wang, Z.Y. Li, Q. Yu, Y. Tian, W.B. Wang, Y.M. Wang and Y. Huang 272
Human Action Recognition Using CNN-SVM Model
V.A. Athavale, S.C. Gupta, D. Kumar and Savita 282
A Method for TLS Malicious Traffic Identification Based on Machine Learning
W. Wang, C.S. Sun and J.N. Ye 291
Estimation of Parameters of Hyperbolic Functions with Additive Noise
D.V. Ivanov, I.L. Sandler and N.V. Chertykovtseva 302
Time-Weighted Collaborative Filtering Algorithm Based on Improved Mini Batch K-Means
Clustering
X. Han, Z. Wang and H.J. Xu 309
Outbreak Prediction of COVID-19 in India Using ARIMA and Prophet Model with
Lockdown and Unlock
A. Sharma, D. Yadav, U. Chandra and H. Maheswari 318
Advances in Science and Technology Vol. 105 c
Study of Voice Communication System Based on FreeSWITCH
F.X. Qin, L. Zhang and Z. Wang 331
Chapter 6: Information Technologies in Education
Recursive Algorithm and its Practice in C Language Online Course Teaching
M. Gu 341
Research on the Data Driven Practice Teaching Mode: Take the Didi Data Set as Example
H.X. Liu, S.H. Zhou, B. Chen, C.F. Wei, W.B. Chang, Y.Y. Xiao and X. Pan 348
Research on Learning Behavior Based on ARCS Learning Motivation Model
Y. Wang and Y.L. Jiang 356
Research on the Construction of Teaching System for Applied Ethnic Legal Talents
Integrating Modern Educational Technology
T. Yu, P. Nai, X.H. Zeng and Y.Z. Zhang 364
Research on Automatic Scoring Algorithm of Chinese Subjective Questions Based on Text
Mining
B. Yang and Y.Q. Yao 377
CHAPTER 1:
Characterization and Processing Technologies