LG PF1000U User Guide Manual

143 Pages·2015·29.62 MB·English

Owner's Manual
LG Minibeam UST
DLP Projector
Please read the safety information carefully before using this product.
PF1000U
www.lg.com
2 LICENSES
LICENSES
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
This DivX Certifed® device has passed rigorous
testing to ensure it plays DivX® video.
To play purchased DivX movies, frst register your
device at vod.divx.com. Find your registration
code in the DivX VOD section of your device
setup menu.
DivX Certifed® to play DivX® video up to HD
1080p, including premium content.
DivX®, DivX Certifed® and associated logos are
trademarks of DivX, LLC and are used under
license.
Covered by one or more of the following U.S.
patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
The terms HDMI and HDMI High-Defnition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
LICENSES 3
This device meets the EMC requirements for home appliances (Class
B) and is intended for home usage. This device can be used in all
regions.
NOTE
• Image shown may differ from your projector.
• Your projector’s OSD (On Screen Display) may differ slightly from
that shown in this manual.
4 SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
Please take note of the safety instructions to prevent any potential accident
or misuse of the projector.
• Safety precautions are given in two forms, i.e., WARNING and CAUTION
as detailed below.
WARNING F ailure to follow the instructions may cause serious
injury and even death.
CAUTION F ailure to follow the instructions may cause personal
injury or product damage.
• Read the owner's manual carefully and keep it on hand.
Read these instructions.
WARNING/CAUTION Keep these instructions.
RISK ODFO E NLOECTT ORPICEN SHOCK
Heed all warnings.
The lightning fash with Follow all instructions.
arrowhead symbol, within
an equilateral triangle, is
Indoor Installation
intended to alert the user to the
presence of uninsulated dangerous
WARNING
voltage within the product’s
enclosure that may be of suffcient • Do not use the projector outside
magnitude to constitute a risk of and do not expose the product
electric shock to persons.
to any humidity or water.
The exclamation point
– Since the product is not
within an equilateral
waterproof, this may result in
triangle is intended to alert
the user to the presence of a fre or electric shock.
important operating and • Do not place the projector in
maintenance (servicing) direct sunlight or near heat
instructions in the literature sources such as radiators, fres,
accompanying the appliance. stoves, etc.
– This may result in fre.
WARNING/CAUTION
• Do not place flammable
– TO REDUCE THE RISK
materials such as aerosols near
OF FIRE AND ELECTRIC
the projector.
SHOCK, DO NOT EXPOSE
– This may result in fre.
THIS PRODUCT TO RAIN OR
• Do not allow children to cling to
MOISTURE.
or climb up to the projector.
– This may cause the projector
to fall, causing injury or death.
SAFETY PRECAUTIONS 5
• Do not install the product in a CAUTION
place with no ventilation (e.g.,
• When placing the projector on a
on a bookshelf or in a closet) or
table or shelf, be careful not to
on a carpet or cushion.
put it near the edge.
– This may result in fre due
– The projector could fall due
to the increase in internal
to balance problems, which
temperature.
may cause personal injury or
• Do not place the product close
damage to the product. Make
to sources of steam, oil or oil
sure to use the projector
mist, such as humidifers and
cabinet or stand that fts the
kitchen counters.
projector.
– Failure to do so may result
• When moving the projector,
in fre, electric shock, or
make sure to switch it off and
corrosion.
remove the power plug and
• Do not install the product onto
cords.
a wall or ceiling that is close to
– The power cord may be
sources of oil or oil mist.
damaged, resulting in fre or
– The product may be
electric shock.
damaged and fall, resulting in
• Do not place the projector on
serious injury.
an unstable or vibrating surface
• Do not place the projector where
such as a wobbly shelf or a
it might be exposed to dust.
slope.
– This may result in fre.
– It may fall and cause injury.
• Do not use the projector in a
• Be careful not to tip the projector
damp place such as a bathroom
over when connecting external
where it is likely to get wet.
devices to the projector.
– This may result in fre or
– This may cause personal
electric shock.
injury or damage to the
• Do not allow a tablecloth or
projector.
curtain to block the air vent.
– This may result in fre due to
Power
the increase in the internal
temperature.
WARNING
• Ensure good ventilation around
the projector. The distance • The power plug is the
between the projector and the disconnecting device. In case of
wall should be at least 30 cm. an emergency, the power plug
– This will prevent fre due to must remain readily accessible.
the increase in the internal
temperature.
6 SAFETY PRECAUTIONS
• The grounding wire should be • If there is any smoke or a
connected. burning smell from the projector
– Ensure that you connect the or AC adapter, stop using the
grounding cable to avoid product immediately. Disconnect
electric shock. If it is not the power cord from the power
possible to ground the unit, outlet, and then contact the
have a qualified electrician customer service center.
install a separate circuit – This may result in fre.
breaker. • To turn off the main power,
Do not try to ground the remove the power plug, which
projector by connecting it to should be positioned so it is
telephone wires, lightning easy to access for operation.
rods or gas pipes.
• The power plug should be CAUTION
inserted fully into the power
• Always grab the plug to remove
outlet.
the AC adapter or power cord.
– An unstable connection may
– Otherwise, this may result
cause a fire.
in a fre or may damage the
• Do not place heavy objects on
product.
the power cord.
• Refrain from constantly bending
– This may result in fre or
the power cord of the AC
electric shock.
adapter.
• Never touch the power plug with
– If the power cord is bent
wet hands.
excessively for a long period
– This may result in electric
of time, the cord may break
shock.
inside. This may result in a
• Do not plug too many devices fre or electric shock.
into one multi-power outlet.
• Ensure the power cord and plug
– This may result in fre due to
are not damaged, modifed,
the power outlet overheating.
severely bent, twisted, pulled,
• Keep the AC adapter, power sandwiched or hot. Do not use
plug, and the used power outlet the product if the power outlet
clean from dust or foreign is loose.
materials building up. – This may result in fre or
– This may result in fre. electric shock.
• Keep the power cord away from
heating devices.
– The wire's sheath may melt,
which may result in fre or
electric shock.
SAFETY PRECAUTIONS 7
• Place the projector where • The surface of the AC adapter is
people will not trip over or step hot. Keep the AC adapter out of
on the power cord to protect the the reach of children and avoid
power cord and plug from any touching it during use.
damage. • Never disassemble the power
– This may result in fre or supply devices (AC adapter/
electric shock. power cord, etc.).
• Do not turn the projector on or – This may damage the power
off by plugging in the power plug cord and result in a fre or
or unplugging it from the power electric shock.
outlet. (Do not use the power • Connect the AC adapter and the
plug as a switch.) power cord firmly.
– This may result in electric – Not doing so may result in a
shock or damage to the product failure or fre.
product.
• Do not place heavy objects
• Do not insert a conductor or put pressure on the power
into the other side of the wall cord and AC adapter and avoid
outlet while the power plug is damage.
inserted into the wall outlet. – This may result in a fre or
In addition, do not touch the may damage the product.
power plug immediately after it
• Always use the AC adapter
is disconnected from the wall
provided or any AC adapters
outlet.
approved and certified by LG
– This may result in electric
Electronics.
shock.
– Any other AC adapter
• Only use the official power cord connected may result in the
provided by LG Electronics. Do screen fickering.
not use other power cords.
– This may result in fre or
When in Use
electric shock.
• If any water or foreign materials WARNING
have gone into the AC adapter,
• Do not place anything containing
power cord, or the interior of the
liquid on top of the projector
projector, turn off the projector
such as a vase, fower pot,
by pressing the power button.
cup, cosmetics, or medicine; or
Remove all the cables, and then
ornaments, candles, etc.
contact the customer service
– This may result in fre or
center.
electric shock, or cause injury
– This may result in fre or
due to falling.
electric shock.
8 SAFETY PRECAUTIONS
• In the event that there is a • If there is a gas leak in the
heavy impact or the cabinet is room with the projector, do not
damaged, switch it off, unplug touch the projector or power
it from the power outlet and outlet. Open the windows for
contact an authorized service ventilation.
center. – Sparks may cause fre or
– This may result in electric burns.
shock. • Unplug the power cord from the
• Do not insert pieces of metal outlet during a lightning storm.
such as coins, hairpins or metal – This will prevent shock or
debris, nor flammable materials damage to the projector.
such as paper or matches into • Do not use the projector near
the projector. electronic devices that generate
– This is to prevent electric a strong magnetic feld.
shock or fre.
• Do not put the plastic package
• Make sure that a child does used to pack the projector
not swallow the batteries when around your head.
you replace the old remote – This may cause suffocation.
control batteries with new ones.
• Do not keep your hand on the
Keep batteries out of reach of
projector for a long time when it
children.
is running.
– If a child swallows a battery,
• When you play a game by
consult a doctor immediately.
connecting a game console to
• Never open any cover on the
a projector, it is recommended
projector.
that you maintain a distance
– There is a high risk of electric
of more than four times the
shock.
diagonal length of the screen.
• Do not look directly into the lens – Make sure that the
when the projector is in use. connecting cable is long
– The bright light may damage enough. Otherwise, the
your eyes. product may fall causing
• When the lamp is on or has just personal injury or damage to
been turned off, avoid touching the product.
the air vent or lamp, because • Do not place the projector or its
these will be very hot. remote control with battery in
an extremely high temperature
environment.
– This may result in fre.
• Do not use 3D glasses if you do
not watch 3D.
SAFETY PRECAUTIONS 9
CAUTION • Do not block the light beam
emitted from the projector using
• Do not place heavy objects on
a book or other object.
the projector.
– Lengthy exposure to the
– It may fall down and cause
projector beam may result in
personal injury.
fre. In addition, the lens may
• Be careful not to allow any be overheated and damaged
impact to the lens during by the refected heat. Disable
transport. the AV function to stop
• Do not touch the lens of the projection temporarily or turn
projector. off the power.
– The lens may be damaged. • Do not start the projector with
• Do not use any sharp tools on the volume turned up high.
the projector such as a knife – High volume may damage
or hammer, because this may hearing.
damage the casing. • Do not use high voltage
• In the event that no image electrical equipment near the
appears on the screen or no projector, (e.g., a bug zapper.).
sound is heard, stop using This may result in product
the projector. Switch off the malfunction.
projector, unplug it from the
power outlet and contact our
Cleaning
service center.
– This may result in fre or WARNING
electric shock.
• Do not spray the projector with
• Do not drop anything onto the
water when cleaning. Make sure
projector or allow anything to
water does not flow into the
bang into the projector.
projector.
– This may cause damage
– This may result in fre or
to the projector or personal
electric shock.
injury.
• When there is smoke or a
• It is recommended that you
strange smell coming out from
maintain a distance of at least
the projector or a foreign object
5-7 times the diagonal length of
falls into the projector, please
the screen.
switch it off and unplug it from
– If you watch the screen at
the power outlet and contact our
a close distance for a long
service center.
time, your eye sight may
– Otherwise, this may result in
become worse.
fre or electric shock.
10 SAFETY PRECAUTIONS
• Use air spray, a soft cloth or Others
a cotton swab moistened with
a lens cleaning chemical or WARNING
alcohol to remove dust or stains
• Some users may experience
on the front projection lens.
a seizure or other abnormal
symptoms when they are
CAUTION
exposed to a flashing light or
• Contact your seller or our particular patterns from a video
service center once a year to game.
clean the internal parts of the
• When you go out, place the
projector.
projector out of reach of
– If you do not clean the
animals, and remove the power
projector for a long period of
plug from the wall outlet.
time, dust will accumulate,
– Using a damaged power cord
which may result in fre or
may result in short circuit
damage to the projector.
or fre.
• When cleaning plastic parts
• Do not use the projector near
such as the projector case,
highprecision electronic devices
unplug the power frst and wipe
or those that transmit weak
with a soft cloth. Do not spray
radio signals.
with water or wipe with a wet
– This may affect the operation
cloth. Never use glass cleaner,
of the product, causing an
automobile or industrial shiner,
accident.
abrasives, wax, benzene, or
• Only a qualified technician
alcohol as these can damage the
can disassemble or modify
projector.
the projector. For diagnosis,
– This can result in fre, electric
adjustment, or repair, contact
shock or cause damage to
your seller or our service center.
the product (deformation and
– This may result in fre or
corrosion).
electric shock.
• Remove the plug from the outlet
• Do not stare directly into lens
before cleaning the product.
when in operation, eye damage
– Otherwise, this may result in
can occur.
electric shock.
• No user serviceable parts
inside unit. High voltage parts
can cause shock and even
electrocution.