LabView Advanced Programming Techniques~tqw~_darksiderg

520 Pages·2007·24.65 MB·English

by  Pamela Morrell

3325_C000.fm Page i Tuesday, August 22, 2006 2:25 PM
Half Title Page
LabVIEW™
Advanced
Programming
Techniques
SECOND EDITION
3325_C000.fm Page ii Tuesday, August 22, 2006 2:25 PM
3325_C000.fm Page iii Tuesday, August 22, 2006 2:25 PM
Title Page
3325_C000.fm Page iv Tuesday, August 22, 2006 2:25 PM
CRC Press
Taylor & Francis Group
6000 Broken Sound Parkway NW, Suite 300
Boca Raton, FL 33487-2742
© 2007 by Taylor & Francis Group, LLC
CRC Press is an imprint of Taylor & Francis Group, an Informa business
No claim to original U.S. Government works
Printed in the United States of America on acid-free paper
10 9 8 7 6 5 4 3 2 1
International Standard Book Number-10: 0-8493-3325-3 (Hardcover)
International Standard Book Number-13: 978-0-8493-3325-5 (Hardcover)
This book contains information obtained from authentic and highly regarded sources. Reprinted
material is quoted with permission, and sources are indicated. A wide variety of references are
listed. Reasonable efforts have been made to publish reliable data and information, but the author
and the publisher cannot assume responsibility for the validity of all materials or for the conse-
quences of their use.
No part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any
electronic, mechanical, or other means, now known or hereafter invented, including photocopying,
microfilming, and recording, or in any information storage or retrieval system, without written
permission from the publishers.
For permission to photocopy or use material electronically from this work, please access www.
copyright.com (http://www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC)
222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-profit organization that
provides licenses and registration for a variety of users. For organizations that have been granted a
photocopy license by the CCC, a separate system of payment has been arranged.
Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and
are used only for identification and explanation without intent to infringe.
Library of Congress Cataloging-in-Publication Data
Bitter, Rick.
LabVIEW : advanced programming techniques / Richard Bitter, Taqi
Mohiuddin, Matthew R. Nawrocki. -- 2nd ed.
p. cm.
ISBN 0-8493-3325-3 (alk. paper)
1. Computer programming. 2. LabVIEW. 3. Computer graphics. I. Mohiuddin,
Taqi. II. Nawrocki, Matt. III. Title.
QA76.6.B5735 2006
005.1--dc22 2006044686
Visit the Taylor & Francis Web site at
http://www.taylorandfrancis.com
and the CRC Press Web site at
http://www.crcpress.com
3325_C000.fm Page v Tuesday, August 22, 2006 2:25 PM
Preface and
Acknowledgments
As the power of the standard personal computer has steadily evolved, so have the
capabilities of LabVIEW. LabVIEW has simplified the working lives of thousands
of scientists, engineers, and technicians, and has increased their productivity. Auto-
mation has reduced the costs and increased the manufacturing outputs of factories
around the world. Cycle times for product development have been shortened and
quality of many products has steadily improved. LabVIEW does not get credit for
all of these improvements, but has without question played a valuable role in many
organizations for accomplishing these goals.
In our earlier experiences with LabVIEW, we found that adequate coverage of
key topics was lacking. Subjects that are useful to users without a formal background
in computer science such as approaches to software development, exception han-
dling, and state machines were very difficult to find. In addition, newer areas such
as multi-threading and ActiveX are even harder to locate and sometimes documen-
tation is non-existent. Part of our intent in this book is to cover these topics that are
difficult to find in other books on LabVIEW.
The chapters in this book are written in a manner that will allow readers to study
the topic of interest without having to read the contents in sequential order. Users
of LabVIEW with varying levels of expertise will find this book beneficial.
Proficiency with a programming language requires an understanding of the
language constructs and the tools needed to produce and debug code. The first two
chapters provide an overview of LabVIEW’s Integrated Development Environment,
programming constructs, and main features. These chapters are meant to supplement
LabVIEW’s documentation, and provide some good background information for
programmers new to the language.
Effective programmers have an understanding of programming techniques that
are applicable to a large number of programming problems. Programming tools such
as state machines that simplify logic of handling various occurrences and the use
of instrument drivers are two such programming tools. Exception handling is left
out of more applications than we want to discuss (including some of our own), but
we have included a chapter specifically on exception handling in LabVIEW.
Advanced programmers understand the operation of the language they are work-
ing with and how it interacts with the system. We present a chapter on multi-
threading’s impact on LabVIEW. Version 5.0 was LabVIEW’s debut into the world
of multi-threaded capable programming languages. A number of the issues that occur
with multi-threading programming were abstracted from the programmer, but a
working knowledge of muti-threaded interactions is needed.
3325_C000.fm Page vi Tuesday, August 22, 2006 2:25 PM
Object Oriented Programming (OOP) is commonly employed in languages
such as C++ and Java. LabVIEW programmers can realize some of the benefits to
such an approach as well. We define key terms often used in OOP, give an
explanation of object analysis and introduce you to applying these concepts within
a LabVIEW environment.
We also present two chapters on ActiveX and .NET. An explanation of related
technologies such as Component Object Model (COM) and Object Linking and
Embedding (OLE) is provided along with the significance of ActiveX. A description
on the use of ActiveX in LabVIEW applications is then provided. We follow this
up with several useful examples of ActiveX/.NET such as embedding a browser on
the front panel, use of the tree view control, and automating tasks with Microsoft
Word, Excel, and Access.
This book would not have been possible without the efforts of many individuals.
First, we want to thank our friends at National Instruments. Ravi Marawar was
invaluable in his support for the completion of this book. We would also like to
thank Norma Dorst and Steve Rogers for their assistance.
Our publishers at CRC Press, Nora and Helena have provided us with guidance
from the first day we began working on this edition until its completion. We
haven’t forgotten about the first edition publishing support of Dawn and Felicia.
If not for their efforts, this book may not have been successful enough to warrant
a second edition.
A special thanks to Tim Sussman, our colleague and friend. He came through
for us at times when we needed him. Also thanks to Greg Stehling, John Gervasio,
Jeff Hunt, Ron Wegner, Joe Luptak, Mike Crowley, the Tellabs Automation team
(Paul Mueller, Kevin Ross, Bruce Miller, Mark Yedinak, and Purvi Shah), Ted Lietz,
and Waj Hussain (if it weren’t for Waj, we would have never written the papers
which got us to writing this book).
Finally, we owe many thanks for the love and support of our families. They had
to put up with us during the many hours spent on this book. We would like to begin
by apologizing to our wives for the time spent working on the second edition that
could not be spent on the households! A special appreciation goes out to the loving
wives who dealt positively with our absences — Thanks to Claire, Sheila, and
Jahanara! Thank you moms and dads: Auradker and Mariam Mohiuddin, Rich and
Madalyn Bitter, Barney and Veronica Nawrocki. For moral support we thank Jaha-
nara, Mazhar, Tanweer, Faheem, Firdaus, Aliyah and Asiya, Matt Bitter, Andrea and
Jerry Lehmacher; Sheila, Reilly, Andy, Corinne, Mark, and Colleen Nawrocki, Sue
and Steve Fechtner.
3325_C000.fm Page vii Tuesday, August 22, 2006 2:25 PM
The Authors
Rick Bitter graduated from the University of Illinois at Chicago in 1994. He has
presented papers at Motorola and National Instruments-sponsored symposia. Rick
currently develops performance testing applications as a Senior Software Engineer.
Taqi Mohiuddin graduated in electrical engineering from the University of Illinois
at Chicago in 1995. He obtained his MBA from DePaul University. He has worked
with LabVIEW since 1995, beginning with version 3.1, ranging in various telecom-
munications applications. He has presented papers on LabVIEW at Motorola and
National Instruments conferences.
Matt Nawrocki graduated from Northern Illinois University in 1995. He has written
papers and has done presentations on LabVIEW topics at Motorola, National Instru-
ments, and Tellabs.
3325_C000.fm Page viii Tuesday, August 22, 2006 2:25 PM
3325_book.fm Page ix Monday, August 21, 2006 2:07 PM
Contents
Chapter 1 Introduction to LabVIEW....................................................................1
1.1 Virtual Instruments...........................................................................................1
1.1.1 The Front Panel....................................................................................2
1.1.2 Block Diagram.....................................................................................2
1.1.3 Executing VIs.......................................................................................3
1.1.4 LabVIEW File Extensions...................................................................5
1.2 LabVIEW Projects...........................................................................................5
1.3 Help..................................................................................................................6
1.3.1 Built-in Help........................................................................................7
1.3.2 Websites................................................................................................8
1.4 Data Flow Programming..................................................................................8
1.5 Menus and Palettes..........................................................................................9
1.6 Front Panel Controls......................................................................................11
1.6.1 User Control Sets...............................................................................12
1.6.1.1 Numeric...............................................................................13
1.6.1.2 Boolean...............................................................................15
1.6.1.3 String & Path......................................................................16
1.6.1.4 Ring & Enum, List & Table...............................................18
1.6.1.5 Array, Cluster, and Matrix..................................................20
1.6.1.6 Graphs and Charts..............................................................22
1.6.1.7 String & Path and I/O........................................................24
1.7 Block Diagram Functions..............................................................................26
1.7.1 Structures............................................................................................26
1.7.1.1 Sequence Structure.............................................................27
1.7.1.2 Case Structure.....................................................................30
1.7.1.3 For Loop.............................................................................32
1.7.1.4 While Loop.........................................................................37
1.7.1.5 Event Structure...................................................................38
1.7.1.6 Disable Structure................................................................38
1.7.1.7 Timed Structure..................................................................39
1.7.1.8 Formula Node.....................................................................41
1.7.2 Numeric, Boolean, String, and Comparison.....................................42
1.7.3 Array and Cluster...............................................................................45
1.7.4 Timing................................................................................................47
1.7.5 Dialog and User Interface..................................................................48
1.7.6 File I/O...............................................................................................49
1.7.7 Instrument I/O, Connectivity, and Communication..........................51
1.7.8 Creating Connectors...........................................................................52
1.7.9 Editing Icons......................................................................................54