Journal of the Mechanics and Physics of Solids 2003: Vol 51 Table of Contents

9 Pages·2003·0.98 MB·English

JOURNAL OF THE
MECHANICS AND
Journal of the Mechanics and Physics of Solids PHYSICS OF SOLIDS
PERGAMON 52 (2004) V—-XIII
www.elsevier.com/locate/jmps
CONTENTS OF VOLUME 51
Number 1
X.Y. WU, K.T. RAMESH and The dynamic growth of a single void in a
T.W. WRIGHT viscoplastic material under transient hy-
drostatic loading
A.R. AKISANYA and Initiation of fracture at the interface
C.S. MENG corner of bi-material joints
H.D. ESPINOSA, A methodology for determining mechan-
B.C. PROROK and ical properties of freestanding thin films
M. FISCHER and MEMS materials
G. HAIAT, The adhesive contact of viscoelastic
M.C. PHAN HUY spheres
and E. BARTHEL
Q.-S. NGUYEN
On shakedown analysis in hardening
plasticity
C.1L.A. THOMSON, Void coalescence within periodic clusters
M.J. WORSWICK, of particles
A.K. PILKEY and
D.J. LLOYD
Y.F. GAO and Z. SUO The orientation of the self-assembled
monolayer stripes on a crystalline sub-
strate
G.E. OLEAGA On the dynamics of cracks in three
dimensions
V.S. DESHPANDE and Energy absorption of an egg-box material
N.A. FLECK
N.K. SIMHA, Inhomogeneity effects on the crack driv-
F.D. FISCHER, ing force in elastic and elastic—plastic
O. KOLEDNIK and materials
C.R. CHEN
Contents Volume J. Mech. Phys. Solids 52 (2004) V-XIII
Number 2
241 Editorial: Online access for everyone via
ScienceDirect
S. ZHUANG, An experimental investigation of shock
G. RAVICHANDRAN wave propagation in periodically layered
and D.E. GRADY composites
K. ADEROGBA An image treatment of elastostatic trans-
mission from an interface layer
E. BITTENCOURT, A comparison of nonlocal continuum and
A. NEEDLEMAN, discrete dislocation plasticity predictions
M.E. GURTIN and
E. VAN DER GIESSEN
G. GUO, W. YANG, Sudden deceleration or acceleration of an
Y. HUANG and intersonic shear crack
A.J. ROSAKIS
Z. ZOU, S.R. REID and S. LI A continuum damage model for delami-
nations in laminated composites
A.A. ELMUSTAFA Nanoindentation and the indentation size
and D.S. STONE effect: Kinetics of deformation and strain
gradient plasticity
Number 3
S.D. GUEST and 383 On the determinacy of repetitive struc-
J.W. HUTCHINSON tures
P.K. PUROHIT and Dynamics of strings made of phase-
K. BHATTACHARYA transforming materials
D. COKER, A.J. ROSAKIS Dynamic crack growth along a polymer
and A. NEEDLEMAN composite-Homalite interface
L.R. XU, Y.Y. HUANG Dynamic crack deflection and penetration
and A.J. ROSAKIS at interfaces in homogeneous materials:
experimental studies and model predictions
E. FRIED and The role of the configurational force balance
M.E. GURTIN in the nonequilibrium epitaxy of films
J.A.W. van DOMMELEN, Micromechanical modeling of the elasto-
D.M. PARKS, M.C. BOYCE, viscoplastic behavior of semi-crystalline
W.A.M. BREKELMANS and polymers
F.P.T. BAAIJENS
Contents Volume | J. Mech. Phys. Solids 52 (2004) V—XIII Vil
543 Strain-gradient effects on steady-state
crack growth in_ linear hardening
materials
Number 4
M. PEIGNEY and C. STOLZ 575 An optimal control approach to the
analysis of inelastic structures under cyclic
loading
P.D. ZAVATTIERI and An examination of the competition be-
H.D. ESPINOSA tween bulk behavior and interfacial beha-
vior of ceramics subjected to dynamic
pressure-shear loading
T. PARDOEN, Grain boundary versus transgranular
D. DUMONT, ductile failure
A. DESCHAMPS and
Y. BRECHET
C.L. MARTIN, Study of particle rearrangement during
D. BOUVARD powder compaction by the Discrete Ele-
and S. SHIMA ment Method
N. ZACHAROPOULOS, Discrete dislocation simulations of the
D.J. SROLOVITZ and development of a continuum plastic zone
R. LESAR ahead of a stationary Mode III crack
N. FANG Slip-line modeling of machining with a
rounded-edge tool—Part I: new model
and theory
Slip-line modeling of machining with a
rounded-edge tool—Part II: analysis of
the size effect and the shear strain-rate
S. GOVINDJEE, A. MIELKE Errata to “The free energy of mixing for
and G.J. HALL n-variant martensitic phase transforma-
tions using quasi-convex analysis” Jour-
nal of the Mechanics & Physics of Solids
50 (9) (2002) 1897-1922
Number 5
E.B. TADMOR and S. HAI 765 A Peierls criterion for the onset of
deformation twinning at a crack tip
Vill Contents Volume J. Mech. Phys. Solids 52 (2004) V—XIII
J.W. KYSAR Energy dissipation mechanisms in ductile
fracture
Y. LEE and S. IM On the computation of the near-tip stress
intensities for three-dimensional wedges
via two-state M-integral
A. BENALLAL and C. COMI Perturbation growth and localization in
fluid-saturated inelastic porous media
under quasi-static loadings
E.T. LILLEODDEN, Atomistic simulations of elastic deforma-
J.A. ZIMMERMAN, tion and dislocation nucleation during
S.M. FOILES and W.D. NIX nanoindentation
M. LIU and K.J. HSIA Interfacial cracks between piezoelectric
and elastic materials under in-plane elec-
tric loading
H.M. SHODJA, I.Z. RAD Interacting cracks and ellipsoidal inho-
and R. SOHEILIFARD mogeneities by the equivalent inclusion
method
‘ H. WANG and Z. LI Diffusive shrinkage of a void within a
grian of a stressed polycrystal
S.L. DOS SANTOS E LUCATO, Erratum to “Electrically driven cracks in
H.-A. BAHR, piezoelectric ceramics: experiments and
V.-B. PHAM, fracture mechanics analysis”, Journal of
D.C. LUPASCU, H. BALKE, the Mechanics and Physics of Solids 50
J. RODEL and U. BAHR (2002) 2333-2353
Number 6
W.W. GERBERICH, 979 Superhard silicon nanospheres
W.M. MOOK,
C.R. PERREY,
C.B. CARTER,
M.I. BASKES,
R. MUKHERJEE,
A. GIDWANI,
J. HEBERLEIN,
P.H. MCMURRY and
S.L. GIRSHICK
T.F. GUO and L. CHENG Vapor pressure and void size effects on
failure of a constrained ductile film
Contents Volume | J. Mech. Phys. Solids 52 (2004) V—XIII IX
L. ANAND and 1015 Thermal effects in the superelasticity of
M.E. GURTIN crystalline shape-memory materials
T. CHANG and H. GAO 1059 Size-dependent elastic properties of a
single-walled carbon nanotube via a mo-
lecular mechanics model
R. LUCIANO and Boundary-layer corrections for stress and
J.R. WILLIS strain fields in randomly heterogeneous
materials
C. HUANG and Influence of lateral confinement on dy-
G. SUBHASH namic damage evolution during uniaxial
compressive response of brittle solids
H.G. BEOM and Effect of electric fields on fracture beha-
S.N. ATLURI vior of ferroelectric ceramics
C.0. HORGAN and Finite thermoelasticity with limiting chain
G. SACCOMANDI extensibility
T.W. BJERKE and Theoretical development and experimen-
J. LAMBROS tal validation of a thermally dissipative
cohesive zone model for dynamic fracture
of amorphous polymers
Number 7
B. LIU, X. QIU, Y. HUANG, 1171 The size effect on void growth in ductile
K.C. HWANG, M. LI materials
and C. LIU
K. GARIKIPATI Couple stresses in crystalline solids: ori-
gins from plastic slip gradients, disloca-
tion core distortions, and three-body
interatomic potentials
N. SRIDHAR, Q.D. YANG 215 Slip, stick, and reverse slip characteristics
and B.N. COX during dynamic fibre pullout
R.V. KUKTA, D. KOURIS 242 Adatoms and their relation to surface
and K. SIERADZKI stress
S. HONG and K.-S. KIM Extraction of cohesive-zone laws from
elastic far-fields of a cohesive crack tip: a
field projection method
M. ADDA-BEDIA Brittle fracture dynamics with arbitrary
and R. ARIAS paths I. Kinking of a dynamic crack in
general antiplane loading
X Contents Volume J. Mech. Phys. Solids 52 (2004) V—XIII
O. KRESSE and 1305 Mobility of lattice defects: discrete and
L. TRUSKINOVSKY continuum approaches
A. SACKFIELD, 1333 The application of asymptotic solutions to
A. MUGADU, characterising the process zone in almost
J.R. BARBER and complete frictionless contacts
D.A. HILLS
Number 8
C.M. LANDIS 1347 On the fracture toughness of ferroelastic
materials
G. XU and C. ZHANG 1371 Analysis of dislocation nucleation from a
crystal surface based on the Peierls—
Nabarro dislocation model
V. GUPTA, V. KIREEV, Glass-modified stress waves for adhesion
J. TIAN, H. YOSHIDA measurement of ultra thin films for device
and H. AKAHOSHI applications
A. BENATAR, D. RITTEL Theoretical and experimental analysis of
and A.L. YARIN longitudinal wave propagation in cylind-
rical viscoelastic rods
I. COHEN and Effective elastic properties of periodic
DJ. BERGMAN composite medium
A. DONEV and Energy-efficient actuation in infinite lat-
S. TORQUATO tice structures
D.C.C. LAM, F. YANG, Experiments and theory in strain gradient
A.C.M. CHONG, J. WANG elasticity
and P. TONG
Y. LIANG and Toward a phenomenological description
P. SOFRONIS of hydrogen-induced decohesion at parti-
cle/matrix interfaces
I. CHASIOTIS and The mechanical strength of polysilicon
W.G. KNAUSS films: Part 1. The influence of fabrication
governed surface conditions
I. CHASIOTIS and The mechanical strength of polysilicon
W.G. KNAUSS films: Part 2. Size effects associated with
elliptical and circular perforations
M.A. McGLOCKTON, A Binary Model of textile composites: ITI
B.N. COX and high failure strain and work of fracture in
R.M. McMEEKING 3D weaves
Contents Volume | J. Mech. Phys. Solids 52 (2004) V—XIII XI
E.E. JONES, M.R. BEGLEY 1601 Adhesion of micro-cantilevers subjected
and K.D. MURPHY to mechanical point loading: modeling
and experiments
W.C. CRONE and An experimental study of the effect of
T.W. SHIELD hardening on plastic deformation at notch
tips in metallic single crystals
Number 9
K. IKEDA, 1649 Simulation and interpretation of diffuse
Y. YAMAKAWA mode bifurcation of elastoplastic solids
and S. TSUTSUMI
R. ABEYARATNE and A lattice-based model of the kinetics of
S. VEDANTAM twin boundary motion
J.J. VLASSAK, The indentation modulus of elastically
M. CIAVARELLA, anisotropic materials for indenters of
J.R. BARBER and arbitrary shape
X. WANG
S.P. MARRA, Characterization and modeling of com-
K.T. RAMESH pliant active materials
and A.S. DOUGLAS
W.J. DRUGAN Two exact micromechanics-based nonlo-
cal constitutive equations for random
linear elastic composite materials
Number 10
Y. BENVENISTE and 1773 New exact results for the effective
G.W. MILTON electric, elastic, piezoelectric and other
properties of composite ellipsoid assem-
blages
W.S. KLUG and M. ORTIZ A director-field model of DNA packaging
in viral capsids
M. ADDA-BEDIA and Self-sustained slip pulses of finite size
M. BEN AMAR between dissimilar materials
C.F. NIORDSON Strain gradient plasticity effects in whis-
ker-reinforced metals
Centents Volume | J. Mech. Phys. Solids 52 (2004) V—XIII
Number 11-12
A. J. ROSAKIS, v__ Dedication
G. RAVICHANDRAN and
S. SURESH
L. B. Freund biography
L. B. Freund’s publications
Conference: Dynamic Failure and Thin
Film Mechanics
J. D. ACHENBACH Laser excitation of surface wave motion
Z. ZHANG and Shear band propagation from a crack tip
R. J. CLIFTON
J. LU, S. SURESH and Dynamic indentation for determining the
G. RAVICHANDRAN strain rate sensitivity of metals
S. DAS Dynamic fracture mechanics in the study
of the earthquake rupturing process:
theory and observation
O. OBREZANOVA and Stability of intersonic shear crack propa-
J. R. WILLIS gation
G. GUO, W. YANG and Supersonic crack growth in a solid of
Y. HUANG upturn stress-strain relation under anti-
plane shear
Y.-S. ING and C.-C. MA Dynamic fracture analysis of finite cracks
by horizontally polarized shear waves in
anisotropic solids
V. B. SHENOY and
Disorder effects in dynamic fragmentation
K.-S. KIM
of brittle materials
Y. WEI and
Hardness trends in micron scale indenta-
J. W. HUTCHINSON
tion
V. S. DESHPANDE,
Finite strain discrete dislocation plasticity
A. NEEDLEMAN and
E. VAN DER GIESSEN
H. T. JOHNSON and Nanoindentation effect on the optical
R. BOSE properties of self-assembled quantum dots
M. J. BUEHLER, Atomistic and continuum studies of
A. HARTMAIER and crack-like diffusion wedges and associated
H. GAO dislocation mechanisms in thin films on
substrates
Contents Volume J. Mech. Phys. Solids 52 (2004) V—XIII XII
P.R. GUDURU, E. CHASON 2127 Mechanics of compressive stress evolution
and L.B. FREUND during thin film growth
R. V. KUKTA, P. LIU and 2149 On the dependence of adatom interactions
D. KOURIS on strain
Z. SUO, J. H. PREVOST and 2169 Kinetics of crack initiation and growth in
J. LIANG organic-containing integrated structures
T.-S. PARK, S. SURESH, 2191 Measurement of full-field curvature and
A. J. ROSAKIS and J. RYU geometrical instability of thin film-
substrate systems through CGS interfero-
metry
wm. 3 QI, K. B. K. TEO, Determination of mechanical properties
K. K. S. LAU, M. C. BOYCE, of carbon nanotubes and _ vertically
W. I. MILNE, aligned carbon nanotube forests using
J. ROBERTSON nanoindentation
and K. K. GLEASON
P. K. PUROHIT, Force steps during viral DNA packaging?
J. KONDEV
and R. PHILLIPS
M. DAO, C. T. LIM and Mechanics of the human red blood cell
S. SURESH deformed by optical tweezers