Journal of Testing and Evaluation 2002: Vol 30 Index

13 Pages·2002·3.9 MB·English

Journal of Testing and Evaluation
Author Index
Volume 30, 2002
Beeson, HD: see Hirsch, DB and Beeson, Legris, A, Pareige, P, Barbu, A, van Walle,
Number Month of Issue Pages HD E, Chaouadi, R, Hou, M, Odette, GR,
Stoller, RE, and Wirth, BD
January 1-93 Belloni, G, Gariboldi, E, Lo Conte, A,
March 95-177 Tono, M, and Speranzoso, P: On the Ex- Chaput, MP: see Kerr, LN, Boivin, WS,
May 179-261 perimental Calibration of a Potential Drop Chaput, MP, Hamilton, SL, Mailhot, SA,
July 263-366 System for Crack Length Measurements in O'Malley, LG, and Teixeira, JC
September 369-458 a Compact Tension Specimen, Nov., 461
November 461-553 Chavarria, R: see Kolman, DG and Chavar-
Blau, PJ: Review of: Wear Analysis for ria, R
Engineers, Sept., 457
Chen, J-S and Lin, KY: Evaluation of an
Boivin, WS: Accelerated Pavement Testing Facility and
A see Kerr, LN, Boivin, WS, Chaput, MP, Development of its Load Equivalence Fac-
Hamilton, SL, Mailhot, SA, O° Malley, LG, tors, March, 103
Abbas, A, Choi, BC, Masad, E, and Pa- and Teixeira, JC Chen, Y: Instrumental Method to Evaluate
see Kerr, LN, Mailhot, SA, Boivin, WS,
pagiannakis, T: The Influence of Labora- Leather Compressive Properties, May, 258
tory Aging Method on the Rhological Prop- Hamilton, SL, O'Malley, LG, Boyd, SM.
erties of Asphalt Binders, March, 171 Pierdominici. Jr.. VJB, and Bushar, HF Choi, BC: see Abbas, A, Choi, BC, Masad,
see Kerr, LN, Boivin, WS, Chaput. MP, E, and Papagiannakis, T
Abd-Allah, NM, Megahed, MM, and Ele- Hamilton, SL, Mailhot, SA, O’ Malley, LG,
iche, AM: Fatigue Crack Growth in Can- and Teixeira, JC Collier, MA: see Montemayor, RG, Collier,
tilever Bending Under Displacement Con- see Kerr, LN, Mailhot, SA, Boivin, WS, MA, and Lazarezyk, GG
trol, March, 124 Hamilton, SL, O'Malley, LG, Boyd, SM,
Conway, Jr, JC: see Sipics, MJ, Segall, AE,
Pierdominici, Jr.. VJB. and Bushar, HF
\bdel-Magied, O: see Sabaaly, PE, Abdel- and Conway, Jr, JC
Magied, O, Dunn, M, and Brinkmeyer, W Bouchard, R: see Wang, H, Bouchard, R,
Eagleson, R, Martin, P, and Tyson, WR
Adams, HA: see Rosenbluth, W = and
Adams, HA Boyd. SM: see Kerr, LN, Mailhot, SA, D
Boivin, WS, Hamilton, SL, O° Malley, LG,
Ali Al-Battashi, S: see Fletcher, DI, Ali Al-
Boyd, SM, Pierdominici, Jr., VJB. and DeJong, JT, Frost, JD, and Saussus, DR:
Battashi, S, and Kapoor, A
Bushar, HF Measurement of Relative Surface Rough-
Allam, MM: see Subba Rao. KS, Allam, ness at Particulate-Continuum Interfaces,
Brinkmeyer, W: see Sabaaly, PE, Abdel-
MM, and Robinson, RG Jan... 8
Magied, O, Dunn, M, and Brinkmeyer, W
Amigo, V: see Lopez, FS, Ferrer, C, Sal- deWit, R: see Ma, L, Low, L. Zhou, J, Song,
Bushar, HF: see Kerr, LN, Mailhot, SA,
vador, MD, and Amigo, V J. and deWit, R
Boivin, WS, Hamilton, SL, O° Malley, LG,
Ayad, R, Safa, L, and Marull, S: Effect of Boyd, SM, Pierdominici, Jr.. VJB, and Dogan, ON: see Schrems, KK, Dogan, ON,
the Aging of the “Product/Package” System Bushar, HF and Hawk, JA
on the Mechanical Properties of Plastic
Domain, C: see Jumel, S, Domain, C,
Packaging, Jan., 55
Ruste, J, Van Duysen, JC, Becquart, C,
Legris, A, Pareige, P, Barbu, A, van Walle,
C
E, Chaouadi, R, Hou, M. Odette, GR,
Stoller, RE, and Wirth, BD
B
Carlson, RL and Halliday, MD: An Ex-
trapolation Method for Estimating Crack Dunn, M: see Sabaaly, PE, Abdel-Magied,
Barbu, A: see Jumel, S, Domain, C, Ruste. Growth Rate Confidence Intervals from O, Dunn, M, and Brinkmeyer, W
J, Van Duysen, JC, Becquart, C, Legris, A,
Small Fatigue Crack Data, May, 179
Pareige, P, Barbu, A, van Walle, E,
Chaouadi, R, Hou, M, Odette, GR, Stoller, Fletcher, T, Chandan, C, Masad, E, and
RE, and Wirth, BD Sivakumar, K: Measurement of Aggregate E
Texture and its Influence on Hot Mix As-
Becquart, C: see Jumel, S, Domain, C, phalt (HMA) Permanent Deformation, Eagleson, R: see Wang, H, Bouchard, R,
Ruste, J, Van Duysen, JC, Becquart, C. Nov., 524 Eagleson, R, Martin, P, and Tyson, WR
Legris, A, Pareige, P, Barbu, A, van Walle,
E, Chaouadi, R, Hou, M, Odette, GR, Chaouadi, R: see Jumel, S$, Domain, C, Eleiche, AM: see Abd-Allah, NM, Mega-
Stoller, RE, and Wirth, BD Ruste, J, Van Duysen, JC, Becquart, C, hed, MM, and Eleiche, AM
541
542 AUTHOR INDEX
Enami, K: see Yoshida, N., Enami, K, and see Kerr, LN, Mailhot, SA, Boivin, WS, J
Hosokawa, K Hamilton, SL, O° Malley. LG, Boyd, SM,
Pierdominici, Jr., VJB, and Bushar, HF Jumel, S, Domain, C, Ruste, J, Van Duy-
see Kerr, LN, Boivin, WS, Chaput, MP, sen, JC, Becquart, C, Legris, A, Pareige,
F Hamilton, SL, Mailhot, SA, O’ Malley, LG, P, Barbu, A, van Walle, E, Chaouadi, R,
and Teixeira, JC Hou, M, Odette, GR, Stoller, RE, and
Wirth, BD: Simulation of Irradiation Ef-
Ferrer, C: see Lopez, FS, Ferrer, C, Sal- Hamilton, SL: see Kerr, LN, Mailhot, SA, fects in Reactor Pressure Vessel Steels: the
vador, MD, and Amigo, V Boivin, WS, Hamilton, SL, O’ Malley, LG, Reactor for Virtual Experiments (REVE)
Boyd, SM, Pierdominici, Jr.. VJB, and Project, Jan., 37
Fletcher, DI, Ali Al-Battashi, S, and Bushar, HF
Kapoor, A: Experimental Assessment of
Materials for Indirect Surface Texturing, Hanson, JH and Ingraffea, AR: Compres-
Nov., 501 sion Loading Applied to Round Double
kK
Beam Fracture Specimens. l: Application to
Fletcher, T, Chandan, C, Masad, E, and
Materials with Large Characteristic
Sivakumar, K: Measurement of Aggregate Kaloush, KE: see Mamlouk, MS, Witezak,
Lengths, Nov., 508
Texture and its Influence on Hot Mix As- MW, Kaloush, KE, and Ho, Y-S
phalt (HMA) Permanent Deformation, Hanson, JH and Ingraffea, AR: Compres-
Kaneshiro, H: see Makabe, C, Makishi, T.
Nov., 524 sion Loading Applied to Round Double
and Kaneshiro, H
Beam Fracture Specimens. II: Derivation of
Fonseca de Arruda, AC: see Maschio, C
Geometry Factor, Nov., 515 Kapoor, A: see Fletcher, DI, Ali Al-Bat-
and Fonseca de Arruda, AC
tashi, S, and Kapoor, A
Hawk, JA: see Schrems, KK, Dogan, ON.
Frost, JD: see DeJong, JT, Frost, JD, and
and Hawk, JA Katase, Y: see Ohgushi, K, Ueda, K, Ota, T,
Saussus, DR
and Katase, Y
Heck, LR: see Gupta, R, Heck, LR. and
Miller, TH Kerr, LN, Mailhot, SA, Boivin, WS,
Hamilton, SL, O’Malley, LG, Boyd, SM,
G Hellmann, JR: see Krohn, MH, Hellmann, Pierdominici, Jr., VJB, and Bushar, HF:
JR. Shelleman, DL. Green, DJ, Sakoske. Use of Surfactants in Condom Water Leak
Gariboldi, E: see Belloni, G, Gariboldi, E, GE, and Salem, JA Testing, July, 313
Lo Conte, A, Tono, M, and Speranzoso, P
Hirsch, DB and Beeson, HD: Test Method Kerr, LN, Boivin, WS, Chaput, MP,
Glaser, RA, Shulman, S, Kurimo, R, and to Determine Flammability of Aerospace Hamilton, SL, Mailhot, SA, O'Malley,
Piacitelli, G: Data Supporting a Provi- Materials, March, 156 LG, and Teixeira, JC: The Effect of Sim-
sional ASTM Method for Metalworking ulated Clinical Use on Vinyl and Latex
Fluids, Sept., 439 Ho, Y-S: see Mamlouk, MS, Witczak, MW, Exam Glove Durability, Sept.. 415
Kaloush, KE, and Ho, Y-S
Godavarti, PS: see Samba Siva Rao, G, Go-
Kim, JH: see Oh, YJ, Kim, JH, and Hwang,
davarti, PS, Mahmood, ST, and Linga Hobson, K: see Tarefder, RA, Zaman, MM. IS
Murty, K and Hobson, K
Kolman, DG and Chavarria, R: Liquid-
Gomez, JT, Shukla, A, and Sharma, A: Hosokawa, K: see Yoshida, N, Enami, K. Metal Embritthement of 7075 Aluminum
Photoelastic Evaluation of Stress Fields and and Hosokawa, K and 4340 Steel Compact Specimens by Gal-
Fracture During Dynamic Splitting Experi- lium, Sept., 452
ments, May, 186 Hou, M: see Jumel, S, Domain, C. Ruste. J.
Van Duysen, JC, Becquart, C, Legris, A, Krishna, KC: see Pandian, NS and Krishna,
Green, DJ: see Krohn, MH, Hellmann, JR. Pareige, P, Barbu, A, van Walle, E, KC
Shelleman, DL, Green, DJ, Sakoske, GE, Chaouadi, R, Hou, M, Odette. GR, Stoller,
and Salem, JA RE, and Wirth, BD Krohn, MH, Hellmann, JR, Shelleman,
DL, Green, DJ, Sakoske, GE, and Salem,
Gupta, R, Heck, LR, and Miller, TH: Ex- Hung, HY: see Mo, YL, Hung, HY, and JA: Test Methodology for Strength Testing
perimental Evaluation of the Torsion Test Zhong,J of Soda-Lime-Silica Float Glass Before and
for Determining Shear Strength of Struc- After Enameling, Nov., 470
tural Lumber, July, 283 Hutchinson, TP: The Relation Between an
Extreme Proportion and a Less Extreme Kumano, H: see Soyama, H and Kumano,
Gupta, R, Heck, LR, and Miller, TH: Fi- Proportion, in the Context of the Compara- H
nite-Element Analysis of the Stress Distri-
bility of Tests, May, 255
bution in a Torsion Test of Full-Size, Struc- Kuo, CY: Correlating Permanent Deforma-
tural Lumber, July, 291 Hwang, IS: see Oh, YJ, Kim, JH, and tion Characteristics of Hot Mix Asphalt
Hwang, IS with Aggregate Geometric Irregularities,
March, 137
H Kurimo, R: see Glaser, RA, Shulman, 8,
Kurimo, R, and Piacitelli, G
Halliday, MD: see Carlson, RL and Halli-
day, MD
Ingraffea, AR: see Hanson, JH and Ingraf-
Hamilton, SL: L
fea, AR
see Kerr, LN, Boivin, WS, Chaput, MP,
Hamilton, SL, Mailhot, SA, O’ Malley, LG, Ismaeel, AA: Scheduling of Pipelined Data Larsson, PL and Mitre Peterson, IR:
and Teixeira, JC Paths for On-Line Testability, March, 146 Evaluation of Sharp Indentation Testing of
AUTHOR INDEX 543
Thin Films and Ribbons on Hard Sub- Mamlouk, MS, Witczak, MW, Kaloush, Notch Shapes in a Flat Test Specimen Un-
strates, Jan., 64 KE, and Ho, Y-S: Effect of Anisotropy on der Tension and Bending, Sept., 369
Compressive and Tensile Properties of As-
Lazarczyk, GG: see Montemayor, RG, Col- phalt Mixtures, Sept., 432 Niibel, K and Weitbrecht, V: Visualiza-
lier, MA, and Lazarezyk, GG tion of Localization in Grain Skeletons with
Martin, P: see Wang, H, Bouchard, R, Ea- Particle Image Velocimetry, July, 322
Legris, A: see Jumel, S$, Domain, C, Ruste,
gleson, R, Martin, P, and Tyson, WR
J, Van Duysen, JC, Becquart, C, Legris, A,
Pareige, P, Barbu, A, van Walle, E, Marull, S: see Ayad, R, Safa, L, and
Chaouadi, R, Hou, M, Odette, GR, Stoller, Marull, S O
RE, and Wirth, BD
Masad, E:
Li, S, Li, Y, and Metcalfe, JB: Enhance- see Abbas, A, Choi, BC, Masad, E, and Odette, GR: see Jumel, S, Domain, C,
ment of Asphalt Pavement Evaluation Us- Papagiannakis, T Ruste, J, Van Duysen, JC, Becquart, C,
ing Monte Carlo Simulation and Acceler- see Fletcher, T, Chandan, C, Masad, E, and Legris, A, Pareige, P, Barbu, A, van Walle,
ated Pavement Testing, Sept., 392 Sivakumar, K E, Chaouadi, R, Hou, M, Odette, GR,
Stoller, RE, and Wirth, BD
see Saadeh, S, Tashman, L, Masad, E, and
Li, Y: see Li, S, Li, Y, and Metcalfe, JB
Mogawer, W Oh, YJ, Kim, JH, and Hwang, IS: Dy-
Lin, KY: see Chen, J-S and Lin, KY see Abbas, A, Choi, BC, Masad, E, and Pa- namic Loading Fracture Tests of Ferritic
Ling, X and Tu, S: Measurement of Creep pagiannakis, T Steel Using the Direct Current Potential
Damage by the Natural Frequency Method, see Fletcher, T, Chandan, C, Masad, E, and Drop Method, May, 221
Sivakumar, K
May, 251
see Saadeh, S, Tashman, L, Masad, E, and Ohgushi, K, Ueda, K, Ota, T, and Katase,
Linga Murty, K: see Samba Siva Rao, G, Mogawer, W Y: Sensitivity Evaluation of a Disk-type
Godavarti, PS, Mahmood, ST, and Linga Torque Transducer Used as a Transfer De-
Murty, K Maschio, C and Fonseca de Arruda, AC: vice, March, 160
Using X-ray Computerized Tomography
Lo Conte, A: see Belloni, G, Gariboldi, E, for Characterization of Defects in Cartridge O'Malley, LG:
Lo Conte, A, Tono, M, and Speranzoso, P Filters, Jan., 85 see Kerr, LN, Boivin, WS, Chaput, MP,
Hamilton, SL, Mailhot, SA, O’ Malley, LG,
Lopez, FS, Ferrer, C, Salvador, MD, and Megahed, MM: see Abd-Allah, NM, Mega- and Teixeira, JC
Amigo, V: Flexural Characteristics of Sun- hed, MM, and Eleiche, AM see Kerr, LN, Mailhot, SA, Boivin, WS,
light-Aged Polyester Composites: Influ- Hamilton, SL, O'Malley, LG, Boyd, SM,
ence of Processing Variables, Jan., 20 Metcalfe, JB: see Li, S, Li, Y, and Metcalfe, Pierdominici, Jr., VJB, and Bushar, HF
JB
Low, L: see Ma, L, Low, L, Zhou, J, Song, see Kerr, LN, Boivin, WS, Chaput, MP,
J, and deWit, R Miller, TH: see Gupta, R, Heck, LR, and Hamilton, SL, Mailhot, SA, O’ Malley, LG,
Miller, TH and Teixeira, JC
Luko, SN: see Proctor, CH and Luko, SN see Gupta, R, Heck, LR, and Miller, TH see Kerr, LN, Mailhot, SA, Boivin, WS,
Hamilton, SL, O'Malley, LG, Boyd, SM,
Mitre Peterson, IR: see Larsson, PL and
Pierdominici, Jr., VJB, and Bushar, HF
M Mitre Peterson, IR
Ota, T: see Ohgushi, K, Ueda, K, Ota, T,
Mo, YL, Hung, HY, and Zhong, J: Inves-
Ma, L, Low, L, Zhou, J, Song, J, and and Katase, Y
tigation of Stress-Strain Relationship of
deWit, R: Simulation and Prediction of
Confined Concrete in Hollow Bridge Quis, D: An Acoustical Technique for De-
Hardness Performance of Rockwell Dia-
Columns Using Neural Networks, July, 330 termining the Loss Factor of Solid Materi-
mond Indenters Using Finite-Element
als, Nov., 497
Analysis, July, 265 Mogawer, W: see Saadeh, S, Tashman, L,
Masad, E, and Mogawer, W
Mahmood, ST: see Samba Siva Rao, G, Go-
davarti, PS, Mahmood, ST, and Linga Montemayor, RG, Collier, MA, and
Murty, K Lazarezyk, GG: Precision and Equiva- P
Mailhot, SA: lence of Automatic and Manual Flash Point Pandian, NS and Krishna, KC: California
see Kerr, LN, Boivin, WS, Chaput, MP, Apparatus, Jan., 74 Bearing Ratio Behavior of Cement-
Hamilton, SL, Mailhot, SA, O’ Malley, LG, Montemayor, RG: Precision and Relative Stabilized Fly Ash-Soil Mixes, Nov., 492
and Teixeira, JC Bias of Automatic and Manual Refractome-
see Kerr, LN, Mailhot, SA, Boivin, WS, ters Using ASTM D 1218 at 20°C, Jan., 89 Papagiannakis, T: see Abbas, A, Choi, BC,
Hamilton, SL, O'Malley, LG, Boyd, SM, Masad, E, and Papagiannakis, T
Pierdominici, Jr., VJB, and Bushar, HF Montemayor, RG: Precision and Relative Pareige, P: see Jumel, S$, Domain, C, Ruste,
see Kerr, LN, Boivin, WS, Chaput, MP, Bias of Automatic and Manual D 1078 Dis- J, Van Duysen, JC, Becquart, C, Legris, A,
Hamilton, SL, Mailhot, SA, O’ Malley, LG, tillation, March, 165 Pareige, P, Barbu, A, van Walle, E,
and Teixeira, JC Chaouadi, R, Hou, M, Odette, GR, Stoller,
see Kerr, LN, Mailhot, SA, Boivin, WS, RE, and Wirth, BD
Hamilton, SL, O'Malley, LG, Boyd, SM, N
Pierdominici, Jr., VJB, and Bushar, HF Petersen, DR: Letter from the Editor, July,
Nishi, M: see Yoshida, N and Nishi, M 263
Makabe, C, Makishi, T, and Kaneshiro,
H: Fatigue Mechanism of lIon-Nitrided Nishimura, T: Fatigue Performance of Piacitelli, G: see Glaser, RA, Shulman, S,
Low Carbon Steel, Sept., 408 Open Drilled Holes with Burrs, Nov., 478 Kurimo, R, and Piacitelli, G
Makishi, T: see Makabe, C, Makishi, T, and Noda, NA and Takase, Y: Stress Concen- Pierdominici, Jr., VJB: see Kerr, LN,
Kaneshiro, H tration Factor Formulas Useful for All Mailhot, SA, Boivin, WS, Hamilton, SL,
544 AUTHOR INDEX
O'Malley, LG, Boyd, SM, Pierdominici, Shelleman, DL: see Krohn, MH, Hellmann, T
Jr.. VJB, and Bushar, HF JR, Shelleman, DL, Green, DJ, Sakoske,
GE, and Salem, JA Takase, Y: see Noda, NA and Takase, Y
Proctor, CH and Luko, SN: On Bounding
a Near-Zero Probability when Zero Occur- Shenoy, A: Model-fitting the Master Tarefder, RA, Zaman, MM, and Hobson,
rences Appear in a Sample, May, 245 Curves of the Dynamic Shear Rheometer K: Evaluating the CoreLok™ Measure-
Data to Extract a Rut-Controlling Term for ment of Bulk Specific Gravity for Hot Mix
Asphalt Pavements, March, 95 Asphalt Samples, July, 274
R Shenoy, A: Fatigue Testing and Evaluation Tashman, L: see Saadeh, S, Tashman, L,
of Asphalt Binders Using the Dynamic Masad, E, and Mogawer, W
Ramsamooj, DV: Analytical Model for Shear Rheometer, July, 303
Teixeira, JC: see Kerr, LN, Boivin, WS,
Fatigue Crack Propagation in Concrete,
Shou-yi, W: see Xiao-bo, Z and Shou-yi, W Chaput, MP, Hamilton, SL, Mailhot, SA,
July, 340
O'Malley, LG, and Teixeira, JC
Robinson, RG: see Subba Rao, KS, Allam, Shukla, A: see Gomez, JT, Shukla, A, and
Tono, M: see Belloni, G, Gariboldi, E, Lo
MM, and Robinson, RG Sharma, A
Conte, A, Tono, M, and Speranzoso, P
Rosenbluth, W and Adams, HA: Re- Shulman, S: see Glaser, RA, Shulman, S, Tu, S: see Ling, X and Tu, S
trieval and Interpretation of Crash-Related Kurimo, R, and Piacitelli, G
Data from Nonresponsive Electronic Con- Tyson, WR: see Wang, H, Bouchard, R, Ea-
Sipics, MJ, Segall, AE, and Conway, Jr,
trol Units in Land Vehicle Systems, July, gleson, R, Martin, P, and Tyson, WR
JC: Evaluation of the Uniaxiality of the
350
Stress State in O-Ring Fracture Strength
Ruste, J: see Jumel, S, Domain, C, Ruste, J, Specimens, March, 118
Van Duysen, JC, Becquart, C, Legris, A, U
Siriwardane, HJ and Smith, DH: Synthe-
Pareige, P, Barbu, A, van Walle, E,
sis of Methane Hydrate in an Unconsoli-
Chaouadi, R, Hou, M, Odette, GR, Stoller,
dated Medium, Jan., | Ueda, K: see Ohgushi, K, Ueda, K, Ota, T,
RE, and Wirth, BD
and Katase, Y
Sivakumar, K: see Fletcher, T, Chandan, C,
Masad, E, and Sivakumar, K Ullrich, G: Application of a Relativistic
Conservation Equation to Crack Initiation,
S Sivakumar Babu, GL, Srinivasa Rao, May, 208
BM, and Sridharan, A: Evaluation of
Saadeh, S, Tashman, L, Masad, E, and Bearing Capacity Improvement Using
Mogawer, W: Spatial and Directional Dis- Composite Grids, July, 362
tribution of Aggregates in Asphalt Mixes, V
Nov., 483 Smith, DH: see Siriwardane, HJ and Smith,
DH
Sabaaly, PE, Abdel-Magied, O, Dunn, M, Van Duysen, JC: see Jumel, S$, Domain, C,
and Brinkmeyer, W: Influence of Hot- Song, J: see Ma, L, Low, L, Zhou, J, Song, Ruste, J, Van Duysen, JC, Becquart, C,
Mix Asphalt Parameters on the Correction J, and deWit, R Legris, A, Pareige, P, Barbu, A, van Walle,
Factors of the Ignition Oven Test, May, 228 E, Chaouadi, R, Hou, M, Odette, GR,
Soyama, H and Kumano, H: The Funda- Stoller, RE, and Wirth, BD
Safa, L: see Ayad, R, Safa, L, and Marull, S mental Threshold Level—a New Parameter
for Predicting Cavitation Resistance, Sept., van Walle, E: see Jumel, S, Domain, C,
Sakoske, GE: see Krohn, MH, Hellmann, 421 Ruste, J, Van Duysen, JC, Becquart, C,
JR, Shelleman, DL, Green, DJ, Sakoske, Legris, A, Pareige, P, Barbu, A, van Walle,
GE, and Salem, JA Speranzoso, P: see Belloni, G, Gariboldi, E, E, Chaouadi, R, Hou, M, Odette, GR,
Lo Conte, A, Tono, M, and Speranzoso, P Stoller, RE, and Wirth, BD
Salem, JA: see Krohn, MH, Hellmann, JR,
Shelleman, DL, Green, DJ, Sakoske, GE, Sridharan, A: see Sivakumar Babu, GL,
and Salem, JA Srinivasa Rao, BM, and Sridharan, A
Salvador, MD: see Lopez, FS, Ferrer, C, Srinivasa Rao, BM: see Sivakumar Babu, Ww
Salvador, MD, and Amigo, V GL, Srinivasa Rao, BM, and Sridharan, A
Wang, H, Bouchard, R, Eagleson, R,
Samba Siva Rao, G, Godavarti, PS, Mah- Steele, PH: see Yadama, V, Zhang, J, Syed, Martin, P, and Tyson, WR: Ring Hoop
mood, ST, and Linga Murty, K: Plastic BM, and Steele, PH Tension Test (RHTT): A Test for Trans-
Instability and Mechanical Anisotropy of
verse Tensile Properties of Tubular Materi-
Textured Zinc, May, 197 Stoller, RE: see Jumel, S, Domain, C,
als, Sept., 382
Ruste, J, Van Duysen, JC, Becquart, C,
Saussus, DR: see DeJong, JT, Frost, JD,
Legris, A, Pareige, P, Barbu, A, van Walle, Weitbrecht, V: see Niibel, K and Weit-
and Saussus, DR
E, Chaouadi, R, Hou, M, Odette, GR, brecht, V
Schrems, KK, Dogan, ON, and Hawk, Stoller, RE, and Wirth, BD
Wirth, BD: see Jumel, S, Domain, C, Ruste,
JA: Verification of Thin-Wall Ductile Iron
Subba Rao, KS, Allam, MM, and Robin- J, Van Duysen, JC, Becquart, C, Legris, A,
Test Methodology, Jan., 47
son, RG: An Apparatus for Evaluating Ad- Pareige, P, Barbu, A, van Walle, E,
Segall, AE: see Sipics, MJ, Segall, AE, and hesion Between Soils and Solid Surfaces, Chaouadi, R, Hou, M, Odette, GR, Stoller,
Conway, Jr, JC Jan., 27 RE, and Wirth, BD
Sharma, A: see Gomez. JT, Shukla, A, and Syed, BM: see Yadama, V, Zhang, J, Syed. Witczak, MW: see Mamlouk, MS, Witczak,
Sharma, A BM, and Steele, PH MW, Kaloush, KE, and Ho, Y-S
AUTHOR INDEX 545
xX tiple Staple Joints in Selected Wood and Z
Wood-Based Materials, Sept., 400
Xiao-bo, Z and Shou-yi, W: Evaluating Zaman, MM: see Tarefder, RA, Zaman,
the Quality of Cigarettes by an Electronic Yoshida, N and Nishi, M: Influence of MM, and Hobson, K
Nose System, Nov., 532 Suction Dissipation on Compression of
Compacted Rock Aggregates Due to Im- Zhang, J: see Yadama, V, Zhang, J, Syed,
mersion, March, 110 BM, and Steele, PH
Zhong, J: see Mo, YL, Hung, HY, and
Y Yoshida, N, Enami, K, and Hosokawa,
Zhong,J
K: Staged Compression-Immersion Direct
Yadama, V, Zhang, J, Syed, BM, and Shear Test on Compacted Crushed Mud- Zhou, J: see Ma, L, Low, L, Zhou, J, Song,
Steele, PH: Experimental Analysis of Mul- stone, May, 239 J, and deWit, R

Journal of Testing and Evaluation
Subject Index
Volume 30, 2002
Air permeability testing
Using X-ray Computerized Tomography
Accelerated pavement testing for Characterization of Defects in Cartridge Backtracking
Enhancement of Asphalt Pavement Evalua- Filters (Maschio, C and Fonseca de Arruda, Dynamic Loading Fracture Tests of Ferritic
tion Using Monte Carlo Simulation and Ac- AC), Jan., 85 Steel Using the Direct Current Potential
celerated Pavement Testing (Li, S, Li, Y, Drop Method (Oh, YJ, Kim, JH, and
Aluminum
and Metcalfe, JB), Sept., 392 Hwang, IS), May, 221
Liquid-Metal Embrittlement of 7075 Alu-
minum and 4340 Steel Compact Specimens Biaxial flexure
Acoustics
by Gallium (Kolman, DG and Chavarria, Test Methodology for Strength Testing of
An Acoustical Technique for Determining
R), Sept., 452 Soda-Lime-Silica Float Glass Before and
the Loss Factor of Solid Materials (Ouis,
After Enameling (Krohn, MH, Hellmann,
D). Nov., 497 Anisotropy
JR, Shelleman, DL, Green, DJ, Sakoske,
Effect of Anisotropy on Compressive and
GE, and Salem, JA), Nov., 470
Adhesion Tensile Properties of Asphalt Mixtures
An Apparatus for Evaluating Adhesion Be- (Mamlouk, MS, Witczak, MW, Kaloush, Bimaterial
tween Soils and Solid Surfaces (Subba Rao, KE, and Ho, Y-S), Sept., 432 Experimental Assessment of Materials for
KS, Allam, MM, and Robinson, RG), Jan.. Indirect Surface Texturing (Fletcher, DI,
«7-7/ Antilocking brake system Ali Al-Battashi, S, and Kapoor, A), Nov.,
Retrieval and Interpretation of Crash-Re-
501
Aerospace materials tated Data from Nonresponsive Electronic
Test Method to Determine Flammability of Control Units in Land Vehicle Systems Binomial distribution
Aerospace Materials (Hirsch, DB and Bee- (Rosenbluth, W and Adams, HA), July, 350 On Bounding a Near-Zero Probability when
son, HD), March, 156 Zero Occurrences Appear in a Sample
Asphalt pavement
(Proctor, CH and Luko, SN), May, 245
Model-fitting the Master Curves of the Dy-
Aggregates
namic Shear Rheometer Data to Extract a Book review
Correlating Permanent Deformation Char-
Rut-Controlling Term for Asphalt Pave- Review of: Wear Analysis for Engineers
acteristics of Hot Mix Asphalt with Aggre-
ments (Shenoy, A), March, 95 (Blau, PJ), Sept., 457
gate Geometric Irregularities (Kuo, CY),
March, 137 Asphalt binders Bridge columns
Influence of Hot-Mix Asphalt Parameters Fatigue Testing and Evaluation of Asphalt Investigation of Stress-Strain Relationship
on the Correction Factors of the Ignition Binders Using the Dynamic Shear Rheome- of Confined Concrete in Hollow Bridge
Oven Test (Sabaaly, PE, Abdel-Magied, O, ter (Shenoy, A), July, 303 Columns Using Neural Networks (Mo, YL,
Dunn, M, and Brinkmeyer, W), May, 228 The Influence of Laboratory Aging Method Hung, HY, and Zhong, J), July, 330
Influence of Suction Dissipation on Com- on the Rhological Properties of Asphalt
pression of Compacted Rock Aggregates Binders (Abbas, A, Choi, BC, Masad, E, Brittle fracture
Due to Immersion (Yoshida, N and Nishi, and Papagiannakis, T), March, 171 Application of a Relativistic Conservation
M), March, 110 Equation to Crack Initiation (Ullrich, G),
Measurement of Aggregate Texture and its Asphalt mixtures May, 208
Influence on Hot Mix Asphalt (HMA) Per- Effect of Anisotropy on Compressive and
Bulk specific gravity
manent Deformation (Fletcher, T, Chan- Tensile Properties of Asphalt Mixtures
Evaluating the CoreLok™ Measurement of
dan, C, Masad, E, and Sivakumar, K), (Mamlouk, MS, Witczak, MW, Kaloush,
Bulk Specific Gravity for Hot Mix Asphalt
Nov., 524 KE, and Ho, Y-S), Sept., 432
Samples (Tarefder, RA, Zaman, MM, and
Spatial and Directional Distribution of Ag- Evaluating the CoreLok'™ Measurement of
Hobson, K), July, 274
gregates in Asphalt Mixes (Saadeh, S, Bulk Specific Gravity for Hot Mix Asphalt
Tashman, L, Masad, E, and Mogawer, W). Samples (Tarefder, RA, Zaman, MM, and
Nov., 483 Hobson, K), July, 274
Asphalt pavement
Aging
Enhancement of Asphalt Pavement Evalua-
Effect of the Aging of the “Product/Pack- Calibration
tion Using Monte Carlo Simulation and Ac-
age” System on the Mechanical Properties On the Experimental Calibration of a Po-
celerated Pavement Testing (Li, S, Li, Y.
of Plastic Packaging (Ayad, R, Safa, L, and tential Drop System for Crack Length Mea-
and Metcalfe, JB), Sept., 392
Marull, S), Jan., 55 surements in a Compact Tension Specimen
The Influence of Laboratory Aging Method Autocorrelation (Belloni, G, Gariboldi, E, Lo Conte, A,
on the Rhological Properties of Asphalt On Bounding a Near-Zero Probability when Tono, M, and Speranzoso, P), Nov., 461
Binders (Abbas, A, Choi, BC, Masad, E, Zero Occurrences Appear in a Sample Sensitivity Evaluation of a Disk-type
and Papagiannakis, T), March, 171 (Proctor, CH and Luko, SN), May, 245 Torque Transducer Used as a Transfer De-
547
548 SUBJECT INDEX
vice (Ohgushi, K, Ueda, K, Ota, T, and (Mamlouk, MS, Witcezak, MW, Kaloush, D
Katase, Y), March, 160 KE, and Ho, Y-S), Sept., 432
Defects characterization
California bearing ratio Compressive properties Using X-ray Computerized Tomography
California Bearing Ratio Behavior of Ce- Instrumental Method to Evaluate Leather for Characterization of Defects in Cartridge
ment-Stabilized Fly Ash-Soil Mixes (Pan- Compressive Properties (Chen, Y), May, Filters (Maschio, C and Fonseca de Arruda,
dian, NS and Krishna, KC), Nov., 492 258 AC), Jan., 85
Cavitation Compressive settling Deterioration
The Fundamental Threshold Level—a New
Influence of Suction Dissipation on Com- Influence of Suction Dissipation on Com-
Parameter for Predicting Cavitation Resis- pression of Compacted Rock Aggregates pression of Compacted Rock Aggregates
tance (Soyama, H and Kumano, H), Sept.. Due to Immersion (Yoshida, N and Nishi, Due to Immersion (Yoshida, N and Nishi,
42) M), March, 110 M), March, 110
Cement Direct current potential drop
California Bearing Ratio Behavior of Ce- Computerized tomography Dynamic Loading Fracture Tests of Ferritic
ment-Stabilized Fly Ash-Soil Mixes (Pan- Using X-ray Computerized Tomography
Steel Using the Direct Current Potential
dian, NS and Krishna, KC), Nov., 492 for Characterization of Defects in Cartridge
Drop Method (Oh, YJ, Kim, JH, and
Filters (Maschio, C and Fonseca de Arruda,
Cigarettes AC), Jan., 85 Hwang, IS), May, 221
Evaluating the Quality of Cigarettes by an
Direct shear
Electronic Nose System (Xiao-bo, Z and Concrete Staged Compression-Immersion Direct
Shou-yi, W), Nov., 532 Analytical Model for Fatigue Crack Propa- Shear Test on Compacted Crushed Mud-
Code coupling gation in Concrete (Ramsamooj, DV), July, stone (Yoshida, N, Enami, K, and
Simulation of Irradiation Effects in Reactor 340 Hosokawa, K), May, 239
Investigation of Stress-Strain Relationship
Pressure Vessel Steels: the Reactor for Vir-
of Confined Concrete in Hollow Bridge Distillation tests
tual Experiments (REVE) Project (Jumel,
Columns Using Neural Networks (Mo, YL, Precision and Relative Bias of Automatic
S. Domain, C, Ruste, J, Van Duysen, JC,
Hung, HY, and Zhong, J), July, 330 and Manual D 1078 Distillation (Mon-
Becquart, C, Legris, A, Pareige, P, Barbu,
temayor, RG), March, 165
A. van Walle. E, Chaouadi, R, Hou, M,
Condoms
Odette. GR, Stoller, RE, and Wirth, BD), Dry point
Use of Surfactants in Condom Water Leak
Jan., 37 Precision and Relative Bias of Automatic
Testing (Kerr, LN, Mailhot, SA, Boivin,
and Manual D 1078 Distillation (Mon-
Cohesion WS, Hamilton, SL, O'Malley, LG, Boyd,
temayor, RG), March, 165
An Apparatus for Evaluating Adhesion Be- SM, Pierdominici, Jr., VJB, and Bushar,
tween Soils and Solid Surfaces (Subba Rao, HF), July, 313 Durability
KS, Allam, MM, and Robinson, RG), Jan.. The Effect of Simulated Clinical Use on
son CoreLok™ Vinyl and Latex Exam Glove Durability
Evaluating the CoreLok'™ Measurement of (Kerr, LN, Boivin, WS, Chaput, MP.
Combustion Bulk Specific Gravity for Hot Mix Asphalt Hamilton, SL, Mailhot, SA, O° Malley, LG,
Test Method to Determine Flammability of Samples (Tarefder, RA, Zaman, MM, and and Teixeira, JC), Sept., 415
Aerospace Materials (Hirsch, DB and Bee- Hobson, K), July, 274
son, HD), March, 156 Dynamic loading
Crack analysis Dynamic Loading Fracture Tests of Ferritic
Compact tension specimens
Fatigue Mechanism of lon-Nitrided Low Steel Using the Direct Current Potential
On the Experimental Calibration of a Po-
Carbon Steel (Makabe, C, Makishi, T, and Drop Method (Oh, YJ, Kim, JH, and
tential Drop System for Crack Length Mea-
Kaneshiro, H), Sept., 408 Hwang, IS), May, 221
surements in a Compact Tension Specimen
(Belloni, G, Gariboldi, E, Lo Conte, A, Dynamic shear rheometer
Crack growth
Tono, M, and Speranzoso, P), Nov., 461 Fatigue Testing and Evaluation of Asphalt
On the Experimental Calibration of a Po-
Binders Using the Dynamic Shear Rheome-
Comparability of tests tential Drop System for Crack Length
ter (Shenoy, A), July, 303
The Relation Between an Extreme Propor- Measurements in a Compact Tension
tion and a Less Extreme Proportion, in the Specimen (Belloni, G, Gariboldi, E, Lo Dynamic splitting
Context of the Comparability of Tests Conte, A, Tono, M, and Speranzoso, P), Photoelastic Evaluation of Stress Fields and
(Hutchinson, TP), May, 255 Nov., 461 Fracture During Dynamic Splitting Experi-
ments (Gomez, JT, Shukla, A, and Sharma,
Composite reinforcements Crack initiation A), May, 186
Evaluation of Bearing Capacity Improve- Application of a Relativistic Conservation
ment Using Composite Grids (Sivakumar Equation to Crack Initiation (Ullrich, G),
Babu, GL, Srinivasa Rao, BM, and Sridha- May, 208
ran, A), July, 362 E
Composites Creep damage
Flexural Characteristics of Sunlight-Aged Measurement of Creep Damage by the Nat- Eccentric compression loading
Polyester Composites: Influence of Pro- ural Frequency Method (Ling, X and Tu, Compression Loading Applied to Round
cessing Variables (Lopez, FS, Ferrer, C, S), May, 251 Double Beam Fracture Specimens. I: Ap-
Salvador, MD, and Amigo, V), Jan., 20 plication to Materials with Large Character-
Critical damage value istic Lengths (Hanson, JH and Ingraffea,
Compression testing Measurement of Creep Damage by the Nat- AR), Nov., 508
Effect of Anisotropy on Compressive and ural Frequency Method (Ling, X and Tu, Compression Loading Applied to Round
Tensile Properties of Asphalt Mixtures S), May, 251 Double Beam Fracture Specimens. II:
SUBJECT INDEX 549
Derivation of Geometry Factor (Hanson, Fatigue Performance of Open Drilled Holes G
JH and Ingraffea, AR), Nov., 515 with Burrs (Nishimura, T), Nov., 478
Finite-Element Analysis of the Stress Dis- Gas sensor array
Elongation
tribution in a Torsion Test of Full-Size, Evaluating the Quality of Cigarettes by an
Ring Hoop Tension Test (RHTT): A Test
Structural Lumber (Gupta, R, Heck, LR, Electronic Nose System (Xiao-bo, Z and
for Transverse Tensile Properties of Tubu-
and Miller, TH), July, 291 Shou-yi, W), Nov., 532
lar Materials (Wang, H, Bouchard, R, Ea-
Simulation and Prediction of Hardness Per-
gleson, R, Martin, P, and Tyson, WR), Geogrids
formance of Rockwell Diamond Indenters
Sept., 382 Using Finite-Element Analysis (Ma, L, Evaluation of Bearing Capacity Improve-
ment Using Composite Grids (Sivakumar
Erosion Low, L, Zhou, J, Song, J, and deWit, R),
The Fundamental Threshold Level—a New July, 265 Babu, GL, Srinivasa Rao, BM, and Sridha-
ran, A), July, 362
Parameter for Predicting Cavitation Resis-
tance (Soyama, H and Kumano, H), Sept., Flammability Graphical analysis
421 Test Method to Determine Flammability of The Relation Between an Extreme Propor-
Aerospace Materials (Hirsch, DB and Bee- tion and a Less Extreme Proportion, in the
son, HD), March, 156
Context of the Comparability of Tests
(Hutchinson, TP), May, 255
Flash point
Precision and Equivalence of Automatic
and Manual Flash Point Apparatus (Mon-
Fatigue
temayor, RG, Collier, MA, and Lazarczyk,
An Extrapolation Method for Estimating H
GG), Jan., 74
Crack Growth Rate Confidence Intervals
from Small Fatigue Crack Data (Carlson, Hardness
Flexural properties
RL and Halliday, MD), May, 179 Evaluation of Sharp Indentation Testing of
Flexural Characteristics of Sunlight-Aged
Analytical Model for Fatigue Crack Propa- Thin Films and Ribbons on Hard Substrates
Polyester Composites: Influence of Pro-
gation in Concrete (Ramsamooj, DV), July, (Larsson, PL and Mitre Peterson, IR), Jan.,
cessing Variables (Lopez, FS, Ferrer, C,
340 ' 64
Salvador, MD, and Amigo, V), Jan., 20
Fatigue Testing and Evaluation of Asphalt Simulation and Prediction of Hardness Per-
Binders Using the Dynamic Shear Rheome- Fly ash formance of Rockwell Diamond Indenters
ter (Shenoy, A), July, 303 California Bearing Ratio Behavior of Ce- Using Finite-Element Analysis (Ma, L,
Fatigue Mechanism of lon-Nitrided Low ment-Stabilized Fly Ash-Soil Mixes (Pan- Low, L, Zhou, J, Song, J, and deWit, R),
Carbon Steel (Makabe, C, Makishi, T, and dian, NS and Krishna, KC), Nov., 492 July, 265
Kaneshiro, H), Sept., 408
High-level synthesis
Fatigue Performance of Open Drilled Holes Forensic engineering
Scheduling of Pipelined Data Paths for On-
with Burrs (Nishimura, T), Nov., 478 Retrieval and Interpretation of Crash-Re-
Line Testability (Ismaeel, AA), March, 146
The Influence of Laboratory Aging Method lated Data from Nonresponsive Electronic
on the Rhological Properties of Asphalt Control Units in Land Vehicle Systems Hot mix asphalt
Binders (Abbas, A, Choi, BC, Masad, E, (Rosenbluth, W and Adams, HA), July, Correlating Permanent Deformation Char-
and Papagiannakis, T), March, 171 350 acteristics of Hot Mix Asphalt with Aggre-
gate Geometric Irregularities (Kuo, CY),
Fatigue crack growth
Fracture March, 137
Fatigue Crack Growth in Cantilever Bend-
Evaluation of the Uniaxiality of the Stress Influence of Hot-Mix Asphalt Parameters
ing Under Displacement Control (Abd-Al-
State in O-Ring Fracture Strength Speci- on the Correction Factors of the Ignition
lah, NM, Megahed, MM, and Eleiche,
mens (Sipics, MJ, Segall, AE, and Conway, Oven Test (Sabaaly, PE, Abdel-Magied, O,
AM), March, 124
Jr, JC), March, 118 Dunn, M, and Brinkmeyer, W), May, 228
Fatigue test specimen Fatigue Mechanism of lon-Nitrided Low Measurement of Aggregate Texture and its
Stress Concentration Factor Formulas Use- Carbon Steel (Makabe, C, Makishi, T, and Influence on Hot Mix Asphalt (HMA) Per-
ful for All Notch Shapes in a Flat Test Spec- Kaneshiro, H), Sept., 408 manent Deformation (Fletcher, T, Chandan,
imen Under Tension and Bending (Noda, C, Masad, E, and Sivakumar, K), Nov., 524
NA and Takase, Y), Sept., 369 Fracture toughness Spatial and Directional Distribution of Ag-
Application of a Relativistic Conservation gregates in Asphalt Mixes (Saadeh, S,
Finite-element analysis Equation to Crack Initiation (Ullrich, G), Tashman, L, Masad, E, and Mogawer, W),
Compression Loading Applied to Round May, 208 Nov., 483
Double Beam Fracture Specimens. II: Compression Loading Applied to Round
Derivation of Geometry Factor (Hanson, Double Beam Fracture Specimens. I: Ap- Hypergeometric distribution
JH and Ingraffea, AR), Nov., 515 plication to Materials with Large Character- On Bounding a Near-Zero Probability when
Evaluatien of Sharp Indentation Testing of istic Lengths (Hanson, JH and Ingraffea, Zero Occurrences Appear in a Sample
Thin Films and Ribbons on Hard Substrates AR), Nov., 508 (Proctor, CH and Luko, SN), May, 245
(Larsson, PL and Mitre Peterson, IR), Jan., Compression Loading Applied to Round
64 Double Beam Fracture Specimens. II:
Evaluation of the Uniaxiality of the Stress Derivation of Geometry Factor (Hanson,
State in O-Ring Fracture Strength Speci- JH and Ingraffea, AR), Nov., 515
mens (Sipics, MJ, Segall, AE, and Conway,
Jr, JC), March, 118 Friction Ignition oven method
Fatigue Crack Growth in Cantilever Bend- Experimental Assessment of Materials for Influence of Hot-Mix Asphalt Parameters
ing Under Displacement Control (Abd-Al- Indirect Surface Texturing (Fletcher, DI, on the Correction Factors of the Ignition
lah, NM, Megahed, MM, and Eleiche, Ali Al-Battashi, S, and Kapoor, A), Nov., Oven Test (Sabaaly, PE, Abdel-Magied, O,
AM), March, 124 501 Dunn, M, and Brinkmeyer, W), May, 228
550 SUBJECT INDEX
Image analysis Joints in Selected Wood and Wood-Based Medical gloves
Correlating Permanent Deformation Char- Materials (Yadama, V, Zhang, J, Syed, BM, The Effect of Simulated Clinical Use on
acteristics of Hot Mix Asphalt with Aggre- and Steele, PH), Sept., 400 Vinyl and Latex Exam Glove Durability
gate Geometric Irregularities (Kuo, CY), (Kerr, LN, Boivin, WS, Chaput, MP,
March, 137 Hamilton, SL, Mailhot, SA, O° Malley, LG,
Measurement of Aggregate Texture and its and Teixeira, JC), Sept., 415
Influence on Hot Mix Asphalt (HMA) Per-
Metalworking fluids
manent Deformation (Fletcher, T, Chan-
Data Supporting a Provisional ASTM
dan, C, Masad, E, and Sivakumar, K), Latex
Method for Metalworking Fluids (Glaser,
Nov., 524 The Effect of Simulated Clinical Use on
RA, Shulman, S, Kurimo, R, and Piacitelli,
Spatial and Directional Distribution of Ag- Vinyl and Latex Exam Glove Durability G), Sept., 439
gregates in Asphalt Mixes (Saadeh, S, (Kerr, LN, Boivin, WS, Chaput, MP,
Tashman, L, Masad, E, and Mogawer, W), Hamilton, SL, Mailhot, SA, O° Malley, LG, Methane hydrate
Nov., 483 and Teixeira, JC), Sept., 415 Synthesis of Methane Hydrate in an Uncon-
solidated Medium (Siriwardane, HJ and
Immersion Leak-before-break
Smith, DH), Jan., |
Influence of Suction Dissipation on Com- Dynamic Loading Fracture Tests of Ferritic
pression of Compacted Rock Aggregates Steel Using the Direct Current Potential Microgravity
Due to Immersion (Yoshida, N and Nishi, Drop Method (Oh, YJ, Kim, JH, and Test Method to Determine Flammability of
M), March, 110 Hwang, IS), May, 221 Aerospace Materials (Hirsch, DB and Bee-
Staged Compression-Immersion Direct son, HD), March, 156
Shear Test on Compacted Crushed Mud- Leather
stone (Yoshida, N, Enami, K, and Instrumental Method to Evaluate Leather Misclassification error
Hosokawa, K), May, 239 Compressive Properties (Chen, Y), May, On Bounding a Near-Zero Probability when
258 Zero Occurrences Appear in a Sample
Impact force (Proctor, CH and Luko, SN), May, 245
The Fundamental Threshold Level—a New Letter from the Editor
Parameter for Predicting Cavitation Resis- Letter from the Editor (Petersen, DR), July, Monte Carlo simulation
tance (Soyama, H and Kumano, H), Sept.. 263 Enhancement of Asphalt Pavement Evalua-
421 tion Using Monte Carlo Simulation and Ac-
Liquid-metal embrittlement
celerated Pavement Testing (Li, S, Li, Y,
Indentation Liquid-Metal Embritthement of 7075 Alu- and Metcalfe, JB), Sept., 392
Evaluation of Sharp Indentation Testing of minum and 4340 Steel Compact Specimens
Thin Films and Ribbons on Hard Substrates by Gallium (Kolman, DG and Chavarria, Mudstone
(Larsson, PL and Mitre Peterson, IR), Jan., R), Sept., 452 Influence of Suction Dissipation on Com-
64 pression of Compacted Rock Aggregates
Loss factor
Due to Immersion (Yoshida, N and Nishi,
Index An Acoustical Technique for Determining M), March, 110
Erratum, Jan., 92 the Loss Factor of Solid Materials (Ouis, Staged Compression-Immersion Direct
D). Nov., 497
Shear Test on Compacted Crushed
Initial boiling point
Precision and Relative Bias of Automatic Lumber test Mudstone (Yoshida, N, Enami, K, and
and Manual D 1078 Distillation (Mon- Experimental Evaluation of the Torsion Hosokawa, K), May, 239
temayor, RG), March, 165 Test for Determining Shear Strength of
Structural Lumber (Gupta, R. Heck, LR,
Interfaces and Miller, TH), July, 283
Measurement of Relative Surface Rough-
ness at Particulate-Continuum Interfaces
(DeJong, JT, Frost, JD, and Saussus, DR), Neural network
Jan., 8 M Evaluating the Quality of Cigarettes by an
Electronic Nose System (Xiao-bo, Z and
Internal structure Shou-yi, W), Nov., 532
Spatial and Directional Distribution of Ag- Manufacturing variables Investigation of Stress-Strain Relationship
gregates in Asphalt Mixes (Saadeh, S, Flexural Characteristics of Sunlight-Aged of Confined Concrete in Hollow Bridge
Tashman, L, Masad, E, and Mogawer, W), Polyester Composites: Influence of Pro- Columns Using Neural Networks (Mo, YL,
Nov., 483 cessing Variables (Lopez, FS, Ferrer, C, Hung, HY, and Zhong, J), July, 330
Salvador, MD, and Amigo, V), Jan., 20
Iron Natural frequency method
Verification of Thin-Wall Ductile lron Test Mechanical anisotropy Measurement of Creep Damage by the Nat-
Methodology (Schrems, KK, Dogan, ON, Plastic Instability and Mechanical ural Frequency Method (Ling, X and Tu,
and Hawk, JA), Jan., 47 Anisotropy of Textured Zine (Samba Siva S), May, 251
Rao, G, Godavarti, PS, Mahmood, ST, and
Linga Murty, K), May, 197 Nondestructive testing
An Acoustical Technique for Determining
Mechanical properties
the Loss Factor of Solid Materials (Ouis,
J-integral Effect of the Aging of the “Product/Pack- D), Nov., 497
age” System on the Mechanical Properties
Application of a Relativistic Conservation
Equation to Crack Initiation (Ullrich, G), of Plastic Packaging (Ayad, R, Safa, L, and Notch shapes
May, 208 Marull, S), Jan., 55 Stress Concentration Factor Formulas Use-
Verification of Thin-Wall Ductile Iron Test ful for All Notch Shapes in a Flat Test Spec-
Joint Methodology (Schrems, KK, Dogan, ON, imen Under Tension and Bending (Noda,
Experimental Analysis of Multiple Staple and Hawk, JA), Jan., 47 NA and Takase, Y), Sept., 369