Table Of Content

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 561-562 available at www.sciencedirect.com “*=* ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Author Index of Volume 203 Abachi, P., 554 Dahotre, N.B., 498 Hsieh, C.-T., 326 Abouei, V., 107 Daneshi, G., 293 Hsieh, S.F., 461 Abrao, A.M., 431 Daniel, D., 480 Huang, Z., 310 Acselrad, O., 13 Dar, N.U., 193 Hussain, G., 193 Aggarwal, R.K., 184 Davim, J.P., 431, 537 Ahn, B., 37 de Souza, T., 1 James, M.N., 46 Akbarzadeh, A., 293 de Vicente, F.S., 526 Jeong, H., 287 Aniolek, M., 333 Deconinck, J., 58 Jesionowski, T., 121 Antonelli, E., 526 Demirkiran, A.S., 465 Jeyakumar, M., 471 Arabi, H., 349 Deng, D., 252 Joseph Davidson, M., 321 Artir, R., 465 Deng, X.-X., 548 Asgari, S.A., 129 Dhakate, S.R., 184 Kalyan Kumar, K.V.B.S., 95 Avci, E., 465 Dhami, T.L., 184 Kannan, A.R., 542 Ayedi, H.F., 404 Dingle, M., 129 Kapsa, P., 404 Dorochenko, A., 58 Karnik, S.R., 431 Dutta Majumdar, J., 50S Kasprzak, W., 333 Bacha, A., 480 KhatibZadeh, S., 113 Bache, M.R., 439 El Domiaty, A., 372 Kheirandish, S., 107 Bahrami, A., 554 El Megharbel, A., 372 Khosravani, A., 349 Balasubramanian, K., 321 El Nasser, G.A., 372 Kim, H., 287 Baradai, C., 80 Elhalouani, F., 80 Kim, K.S., 232 Barisic, B., 154 Elleuch, K., 404 Kiminami, R.H.G.A., 513 Bataller, R.C., 176 Bayramoglu, M., 277 Elmustafa, A.A., 411 Klocker, H., 480 Bigdeli Karimi, M., 349 Emadoddin, E., 293 Ko, Y.-D., 454 Blignault, C., 46 Erdmann, M., 19 Kumar, S., 471 Kurita, H., 333 Bortels, L., 58 Fang, H., 216 Kurnia, W., 241 Bortot, P., 381 Farris, T.N., 365 Kuroda, M., 396 Ferry, M., 518 Kweon, K.E., 454 Canteli, J.A., 267 Fu, Y.C., 166 Cantero, J.L., 267 Lajimi, A.M., 72 Ceretti, E., 381 Gaitonde, V.N., 431 Lavernia, E.)J., 37 Cetlin, P.R., 13 Gao, L., 193 Lee, H., 287 Chandrasekar, S., 365 Ge, Y.F., 166 Lee, J.H., 454 Chang, S.-H., 365 Geren, N., 277 Li, G., 19 Chen, C., 202 Giardini, C., 381 Li, Z., 449 Chen, J., 86 Gindy, N., 420 Liang, W., 252 Chen, J.-C., 548 Gordani, G.R., 315 Lin, M.H., 461 Chen, S.L., 461 Grujicic, M., 19 Liu, L., 548 Chen, X., 420 Guermazi, N., 404 Liu, Q., 420 Chen, Y., 301 Gupta, D.K., 184 Liu, X., 202 Chen, Y.-C., 117 Gupta, G.S., 471 Liu, X.-K., 548 Cheng, B., 449 Lu, F., 301 Chi, Y., 548 Han, S., 117 Luo, S.B., 166 Chiou, S.Y., 461 Hasheminia, S., 113 Choudhury, S.K., 95 Hattingh, D.G., 46 Madaah-Hosseini, H.R., 554 Clark, D., 439 Hayat, N., 193 Mandal, S., 411 Clemente, V.C., 537 Hernandes, A.C., 526 Manna, A., 147 Correia, A.E., 431 Hocheng, H., 342 Manna, I., 505 Cui, J., 310 Hodgson, P.D., 129 Marrow, T.J., 396 Cui, Z., 193 Holzleitner, J., 19 Math, M.D., 154 Elsevier B.V. doi:10.1016/S0924-0136(08)00423-8 562 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 561-562 Mathur, R.B., 184 Ranjbar, K., 107 Tsao, C.C., 342 Menezes, R.R., 513 Razavi, R.S., 315 Tzeng, Y.-f., 355 Miguélez, M.H., 267 Rice, J., 411 Milad, M., 80 Rolfe, B., 1 Vahidi, A., 19 Miraghaei, S., 554 Rolfe, B.F., 129 Van den Bossche, B., 58 Monirvaghefi, M., 315 Rubim, G., 13 van Niekerk, T.l., 46 Moon, T.-H., 454 Rubio, J.C., 431 Van Tyne, C.J., 532 Moon, Y.H., 532 Ryu, C., 232 Varyukhin, V., 305 Murakawa, H., 252 Myoung, J.-M., 454 Saghafian, H., 107 Wan, Z.-P., 548 Salehi, M., 315 Wang, D.-Y., 117 Nath, A.K., 505 Salodkar, S., 147 Wang, Y., 420 Newbery, A.P., 37 Samant, A.N., 498 Wei, J., 86 Norasethasopon, S., 137 Samedani, M., 113 Weng, K.-W., 117 Novak, F., 208 Samei, J., 349 Whittaker, M.T., 439 Novak, S., 208 Satish, G.D., 102 Wu, C.-F., 326 Nutt, S.R., 37 Sellappan, V., 19 Wu, C.-H., 326 Seyr, N., 19 Ohdar, R.K., 102 Shahryari, A., 389 Olofsson, D., 221 Shanmugam, S., 542 Xirouchakis, P., 72 Xu, J.H., 166 Onat, B., 277 Shr, J.-F., 326 Silva, R.S., 526 Xu, W., 216, 518 Paital, S.R., 498 Silva, S., 537 Pakshir, M., 389 Singh, N.K., 102 Yamagata, H., 333 Pandey, K.S., 542 Sokolowski, J.H., 333 Yang, H., 166 Pandurangan, B., 19 Spuskanyuk, A., 305 Yao, S., 301 Pang, Y.C., 193 Spuskanyuk, V., 305 Yekta, B.E., 113 Pao, P.S., 37 Sun, D., 86 Yeo, S.H., 241 Park, B., 287 Yi, H.K., 532 Park, K., 287 Tagore, G.R.N., 321 Yun, |., 454 Pavlina, E.J., 532 Tan, P.C., 241 PepelnjakT,. , 154 Tang, Y., 548 Zanatta, A.R., 526 Pereira, I.M., 13 Tasdelen, B., 221 Zhang, R., 449 Pereira, M., 129 Thordenberg, H., 221 Zhang, Y., 202, 301 Purcar, M., 58 Tong, L., 86 Zhao, H., 310 Tong, Z., 449 Zhao, L., 202 Rai, J.K., 72 Topping, T.D., 37 Zhou, W., 202 Ramesh Chandra, B., 50S Torkar, D., 208 Zreiba, N., 80 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 available at www.sciencedirect.com “°>* ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Subject Index of Volume 203 AA6061 alloy Analysis of variance An experimental study on the quality of flow-formed Preparation of fatigue specimens with controlled AA6061 tubes, 321 surface characteristics, 396 ABAQUS ANN Experimental and numerical investigation of the An intelligent system for predicting HPDC process plunge stage in friction stir welding, 411 variables in interactive environment, 72 Acicular ferrite ANOVA Comparison of recrystallization behaviour of cold Analysis of parametric influence on delamination in deformed acicular ferrite produced by conventional high-speed drilling of carbon fiber reinforced plastic processing and direct strip casting, 518 composites, 431 Active resistance Area fraction Analysis of the variation regularity of the parameters Influence of process parameters on shape quality and of the discharge circuit with the distance between area fraction in round-to-hexagonal composite wire workpiece and inductor for electromagnetic drawing, 137 forming processes, 216 Artificial neural networks Adhesion Apparent viscosity prediction of alumina-paraffin Characteristics of diamond-like carbon film deposited suspensions using artificial neural networks, by filter arc deposition, 117 208 Adsorptive properties Aspiration pressure Synthesis and characterization of spherical silica Modeling of gas flow inside and outside the nozzle precipitated via emulsion route, 121 used in spray deposition, 471 Aerospace components Austenitic stainless steel Shaped metal deposition of a nickel alloy for aero The effect of cold work on structure and properties of engine applications, 439 AISI 304 stainless steel, 80 Aging impact Austenitic steel Aging effect on thermal, mechanical and tribological Effect of rolling strain on transformation induced behaviour of polymeric coatings used for pipeline plasticity of austenite to martensite in a high-alloy application, 404 austenitic steel, 349 Air Automatic mesh generation An experimental investigation on contact length Advanced and automatic determination of initial during minimum quantity lubrication (MQL) configuration of curved shell plates for flame machining, 221 bending, 232 Air bending Automotive structural components Experimental identification of a thermo-mechanical Computational analysis of injection-molding residual- model for air bending, 267 stress development in direct-adhesion polymer-to- Al-20% Si alloy metal hybrid body-in-white components, 19 The effect of average cooling rates on the microstructure of the Al-20% Si high pressure die Bamboo charcoals casting alloy used for monolithic cylinder Synthesis and photocatalytic characterization of blocks, 333 titania-supported bamboo charcoals by using Alloy 718 sol-gel method, 326 Shaped metal deposition of a nickel alloy for aero Barium calcium titanate engine applications, 439 Electrophoretic deposition of Ba, ,,Ca,,,TiIO, nano Alumina powders, 526 Process optimization in laser surface structuring of Brazing technology parameter alumina, 498 Scanning electron beam brazing of thin-wall capillary Microwave sintering of alumina-zirconia nano tube-sheet structure, 301 composites, 513 Aluminum alloy tube CAD model reconstruction Application of a combined heating system for the Advanced CAD integrated approach for 3D electro- warm hydroforming of lightweight alloy tubes, 532 chemical machining simulations, 58 Elsevier B.V. doi:10.1016/S0924-0136(08)00424-X 564 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Calculation of pressure Control Development of _ the equal-channel angular Scanning electron beam brazing of thin-wall capillary hydroextrusion, 305 tube-sheet structure, 301 Candle stick drill Convergent nozzle configurations Evaluation of thrust force and surface roughness in Modeling of gas flow inside and outside the nozzle drilling composite material using Taguchi analysis used in spray deposition, 471 and neural network, 342 Copper film Carbon black A novel method of electroless plating on AZ31 Effect of different carbon fillers on the properties of magnesium alloy sheet, 310 graphite composite bipolar plate, 184 Corrosion Carbon fiber reinforced plastics (CFRP) A novel method of electroless plating on AZ31 Analysis of parametric influence on delamination in magnesium alloy sheet, 310 high-speed drilling of carbon fiber reinforced plastic Corrosion behaviour of laser gas-nitrided Ti-6Al-4V composites, 431 alloy in nitric acid solution, 315 Carbon fibers Studies on compositionally graded silicon carbide Effect of different carbon fillers on the properties of dispersed composite surface on mild steel graphite composite bipolar plate, 184 developed by laser surface cladding, 505 Ceramics Cryogenic machining Apparent viscosity prediction of alumina-paraffin Investigation of tool wear and cutting force in cryogenic suspensions using artificial neural networks, 208 machining using design of experiments, 95 Process optimization in laser surface structuring of Cutting depth alumina, 498 Preparation of fatigue specimens with controlled Ceria slurry surface characteristics, 396 Pad roughness variation and its effect on material Cutting force removal profile in ceria-based CMP slurry, 287 Investigation of tool wear and cutting force in cryogenic Chemical composition machining using design of experiments, 95 Effect of cold rolling reduction and intercritical Cutting pipe mechanism annealing temperature on the bulk texture of two The characteristics of cutting pipe mechanism with TRIP-aided steel sheets, 293 multi-electrodes in EDM, 461 Chemical mechanical polishing Cylinder block Pad roughness variation and its effect on material The effect of average cooling rates on the removal profile in ceria-based CMP slurry, 287 microstructure of the Al-20% Si high pressure die Chromium plating casting alloy used for monolithic cylinder blocks, Statistical optimization of process parameters to 333 obtain maximum thickness and brightness in chromium plating, 277 3D FEM Cladding Influence of process parameters on shape quality and Studies on compositionally graded silicon carbide area fraction in round-to-hexagonal composite wire dispersed composite surface on mild steel drawing, 137 developed by laser surface cladding, 505 3D modelling Cold deformation Advanced CAD integrated approach for 3D Some investigation on the cold deformation behaviour electrochemical machining simulations, 58 of sintered iron-0.8% carbon alloy powder preforms, Decorating sphere 542 Precision control of explosive forming for metallic Cold rolled sheet decorating sphere, 449 Effect of cold rolling reduction and intercritical Degradation annealing temperature on the bulk texture of two Aging effect on thermal, mechanical and tribological TRIP-aided steel sheets, 293 behaviour of polymeric coatings used for pipeline Cold rolling application, 404 The effect of cold work on structure and properties of Delamination AISI 304 stainless steel, 80 Analysis of parametric influence on delamination in Combined heating high-speed drilling of carbon fiber reinforced plastic Application of a combined heating system for the composites, 431 warm hydroforming of lightweight alloy tubes, 532 Drilling investigation of MDF (medium density Composite bipolar plate fibreboard), 537 Effect of different carbon fillers on the properties of Delamination wear graphite composite bipolar plate, 184 An investigation of the wear behaviour of 0.2% C dual Composite material phase steels, 107 Evaluation of thrust force and surface roughness in Densification drilling composite material using Taguchi analysis Some investigation on the cold deformation behaviour and neural network, 342 of sintered iron-0.8% carbon alloy powder preforms, Computer-aided design 542 Advanced CAD integrated approach for 3D Design of Experiment electrochemical machining simulations, 58 Statistical analysis of finite element modeling in sheet Contact length metal forming and springback analysis, 129 An experimental investigation on contact length Diamond turning during minimum quantity lubrication (MQL) Workpiece surface quality when _ ultra-precision machining, 221 turning of SiC_/Al composites, 166 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Diamond-like carbon Electrical resistivity Characteristics of diamond-like carbon film deposited Effect of different carbon fillers on the properties of by filter arc deposition, 117 graphite composite bipolar plate, 184 Die design Electrochemical machining Preform optimization of pad section of front axle beam Advanced CAD integrated approach for 3D using DEFORM, 102 electrochemical machining simulations, 58 Discharging current Electrode shape change Analysis of the variation regularity of the parameters Advanced CAD integrated approach for 3D of the discharge circuit with the distance between electrochemical machining simulations, 58 workpiece and inductor for electromagnetic Electroless plating forming processes, 216 A novel method of electroless plating on AZ31 Distance magnesium alloy sheet, 310 Analysis of the variation regularity of the parameters Electromagnetic field of the discharge circuit with the distance between Influence of a modulated electromagnetic field on workpiece and inductor for electromagnetic fouling in a double-pipe heat exchanger, 389 forming processes, 216 Electrophoretic deposition Drawing stress Electrophoretic deposition of Bay ,,Cay ,,TI0, Influence of process parameters on shape quality and nanopowders, 526 area fraction in round-to-hexagonal composite wire Electro-thermal model drawing, 137 Critical assessment and numerical comparison of Drilling electro-thermal models in EDM, 241 Evaluation of thrust force and surface roughness in Elovich kinetic model drilling composite material using Taguchi analysis Synthesis and photocatalytic characterization of and neural network, 342 titania-supported bamboo charcoals by using Drilling investigation of MDF (medium density sol-gel method, 326 fibreboard), 537 Emulsion Dry Synthesis and characterization of spherical silica An experimental investigation on contact length precipitated via emulsion route, 121 during minimum quantity lubrication (MQL) Energy dispersive spectroscopy machining, 221 Experimental and numerical investigation of the Dual phase steel plunge stage in friction stir welding, 411 An investigation of the wear behaviour of 0.2% C dual Equal-channel angular extrusion phase steels, 107 Development of the equal-channel angular Ductile fracture hydroextrusion, 305 A novel finned micro-groove array structure and Equivalent inductance forming process, 548 Analysis of the variation regularity of the parameters Ductility of the discharge circuit with the distance between Metal ductility at low stress triaxiality application to workpiece and inductor for electromagnetic sheet trimming, 480 forming processes, 216 Dynamic programming Evolution Optimization of machining conditions for effective Experimental analysis on evolution of superfinished turning of E0300 alloy steel, 147 surface texture, 365 Explosive forming Precision control of explosive forming for metallic E0300 alloys steel decorating sphere, 449 Optimization of machining conditions for effective Extrusion turning of E0300 alloy steel, 147 Large UFG Al alloy plates from cryomilling, 37 EBSD A novel finned micro-groove array structure and Comparison of recrystallization behaviour of cold forming process, 548 deformed acicular ferrite produced by conventional processing and direct strip casting, 518 FE simulations Effect of shape The determination of flow stress of tubular material Numerical investigation on multiphase coupling heat for hydroforming applications, 381 conduction with subcooling boiling boundary Feed rate conditions and effect of shape during quenching Preparation of fatigue specimens with controlled process, 86 surface characteristics, 396 Elastic plastic material Ferroelectric Metal ductility at low stress triaxiality application to Electrophoretic deposition of Bay 77Cap >, TI0, sheet trimming, 480 nanopowders, 526 Electrical discharge machining Ferromagnetic The characteristics of cutting pipe mechanism with The effect of cold work on structure and properties of multi-electrodes in EDM, 461 AISI 304 stainless steel, 80 Electrical discharge machining (EDM) Filling time Critical assessment and numerical comparison of An intelligent system for predicting HPDC process electro-thermal models in EDM, 241 variables in interactive environment, 72 Development of a flexible high-speed EDM technology Filter arc deposition with geometrical transform optimization, Characteristics of diamond-like carbon film deposited 355 by filter arc deposition, 117 566 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Finite element analysis Hardness Comparison of the experimental and the numerically Effect of rolling strain on transformation induced predicted mechanical damage in the sheet forming plasticity of austenite to martensite in a high-alloy of steel, 13 austenitic steel, 349 Finite element method Heat conduction Advanced CAD integrated approach for 3D Numerical investigation on multiphase coupling heat electrochemical machining simulations, 58 conduction with subcooling boiling boundary Prediction of welding distortion in a curved plate conditions and effect of shape during quenching structure by means of elastic finite element process, 86 method, 252 Heat transfer Finite elements Influence of a modulated electromagnetic field on Advanced and automatic determination of initial fouling in a double-pipe heat exchanger, 389 configuration of curved shell plates for flame Heat treatment bending, 232 An investigation of the wear behaviour of 0.2% C dual Metal ductility at low stress triaxiality application to phase steels, 107 sheet trimming, 480 Heating element Finned surface Application of a combined heating system for the A novel finned micro-groove array structure and warm hydroforming of lightweight alloy tubes, 532 forming process, 548 Hexagonal composite wire Flow-forming Influence of process parameters on shape quality and An experimental study on the quality of flow-formed area fraction in round-to-hexagonal composite wire AA6061 tubes, 321 drawing, 137 Fluor-phlogopite HfO, Effect of sintering and melt casting methods on Statistical modeling of the electrical characteristics for properties of a machinable fluor-phlogopite HfO, thin films grown by MOMBE for high-k glass-ceramic, 113 dielectric applications, 454 Force footprint High pressure die casting Characterization of the influences of FSW tool The effect of average cooling rates on the geometry on welding forces and weld tensile microstructure of the Al-20% Si high pressure die strength using an instrumented tool, 46 casting alloy used for monolithic cylinder blocks, 333 Force monitoring High temperature Characterization of the influences of FSW tool Experimental identification of a thermo-mechanical geometry on welding forces and weld tensile model for air bending, 267 strength using an instrumented tool, 46 High-speed drilling Forming limit Analysis of parametric influence on delamination in Some investigation on the cold deformation behaviour high-speed drilling of carbon fiber reinforced plastic of sintered iron-0.8% carbon alloy powder preforms, composites, 431 542 Hot isostatic pressing Fouling Large UFG Al alloy plates from cryomilling, 37 Influence of a modulated electromagnetic field on HPDC fouling in a double-pipe heat exchanger, 389 An intelligent system for predicting HPDC process Fracture mechanisms variables in interactive environment, 72 Metal ductility at low stress triaxiality application to Hydroextrusion sheet trimming, 480 Development of the equal-channel angular Friction hydroextrusion, 305 Development of the equal-channel angular Hygrothermal aging hydroextrusion, 305 Aging effect on thermal, mechanical and tribological Friction stir welding behavicur of polymeric coatings used for pipeline Characterization of the influences of FSW tool application, 404 geometry on welding forces and weld tensile strength using an instrumented tool, 46 Ideal function Front axle beam Development of a flexible high-speed EDM technology Preform optimization of pad section of front axle beam with geometrical transform optimization, 355 using DEFORM, 102 Induction heating FSW Application of a combined heating system for the Experimental and numerical investigation of the warm hydroforming of lightweight alloy tubes, 532 plunge stage in friction stir welding, 411 Inherent deformation Prediction of welding distortion in a curved plate Gap structure by means of elastic finite element Prediction of welding distortion in a curved plate method, 252 structure by means of elastic finite element Instrumented tool method, 252 Characterization of the influences of FSW tool Gas atomization geometry on welding forces and weld tensile Modeling of gas flow inside and outside the nozzle strength using an instrumented tool, 46 used in spray deposition, 471 Intercritical annealing Grinding force modelling Effect of cold rolling reduction and intercritical Empirical modelling of grinding force based on annealing temperature on the bulk texture of two multivariate analysis, 420 TRIP-aided steel sheets, 293 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Interface element Mechanical properties Prediction of welding distortion in a curved plate Large UFG Al alloy plates from cryomilling, 37 structure by means of elastic finite element Effect of different carbon fillers on the properties of method, 252 graphite composite bipolar plate, 184 Interlayer Aging effect on thermal, mechanical and tribological A novel method of electroless plating on AZ31 behaviour of polymeric coatings used for pipeline magnesium alloy sheet, 310 application, 404 Medium density fibreboard (MDF) Johnson-Cook law Drilling investigation of MDF (medium density Experimental and numerical investigation of the fibreboard), 537 plunge stage in friction stir welding, 411 Melt casting Effect of sintering and melt casting methods on Laminar boundary layer properties of a machinable fluor-phlogopite Similarity solutions for flow and heat transfer of a glass-ceramic, 113 quiescent fluid over a nonlinearly stretching Methylene blue surface, 176 Synthesis and photocatalytic characterization of Laplace equation titania-supported bamboo charcoals by using Advanced CAD integrated approach for 3D sol-gel method, 326 electrochemical machining simulations, 58 Micro-groove Laser A novel finned micro-groove array structure and Studies on compositionally graded silicon carbide forming process, 548 , dispersed composite surface on mild steel Microstructure ceveloped by laser surface cladding, 505 An investigation of the wear behaviour of 0.2% C dual Laser gas nitriding phase steels, 107 Corrosion behaviour of laser gas-nitrided Ti-6Al-4V The effect of average cooling rates on the alloy in nitric acid solution, 315 microstructure of the Al-20% Si high pressure die Liiders’ bands (stretcher strains) casting alloy used for monolithic cylinder blocks, 333 Predicting of the Liiders’ bands in the processing of TH Shaped metal deposition of a nickel alloy for aero material in computer environment by means of engine applications, 439 stochastic modeling, 154 Microwave processing Low carbon steel Microwave sintering of alumina-zirconia nano- Comparison of recrystallization behaviour of cold composites, 513 deformed acicular ferrite produced by conventional Mild steel processing and direct strip casting, 518 Studies on compositionally graded silicon carbide Low-pressure injection moulding dispersed composite surface on mild steel Apparent viscosity prediction of alumina-paraffin developed by laser surface cladding, 505 suspensions using artificial neural networks, 208 Modeling of gas flow Lubricant Modeling of gas flow inside and outside the nozzle Tool and lubrication for negative incremental forming used in spray deposition, 471 of a commercially pure titanium sheet, 193 Modelling Lubrication method Experimental identification of a thermo-mechanical Tool and lubrication for negative incremental forming model for air bending, 267 of a commercially pure titanium sheet, 193 Molecular dynamics Study of ultrashort laser ablation of metals by Magnetic measurement molecular dynamics simulation and experimental Effect of rolling strain on transformation induced method, 202 plasticity of austenite to martensite in a high-alloy MOMBE austenitic steel, 349 Statistical modeling of the electrical characteristics for Marciniak test HfO, thin films grown by MOMBE for high-k Comparison of the experimental and the numerically dielectric applications, 454 predicted mechanical damage in the sheet forming Monocrystalline copper of steel, 13 Study of ultrashort laser ablation of metals by Martensitic transformation molecular dynamics simulation and experimental The effect of cold work on structure and properties of method, 202 AISI 304 stainless steel, 80 Moving cathode tools Material removal Advanced CAD integrated approach for 3D Pad roughness variation and its effect on material electrochemical machining simulations, 58 removal profile in ceria-based CMP slurry, 287 MQL Material removal rate An experimental investigation on contact length The characteristics of cutting pipe mechanism with during minimum quantity lubrication (MQL) multi-electrodes in EDM, 461 machining, 221 Mechanical alloying Multivariate regression Characterization of mechanically alloyed Fe, ,Si, and Empirical modelling of grinding force based on Fe,, .Si,,,;Nb, nanocrystalline powders, 554 multivariate analysis, 420 Mechanical damage Comparison of the experimental and the numerically Nanocomposite predicted mechanical damage in the sheet forming Microwave sintering of alumina-zirconia nano- of steel, 13 composites, 513 568 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Nanocrystalline powder Plating thickness Large UFG Al alloy plates from cryomilling, 37 Statistical optimization of process parameters to Nanostructured Fe-Si powder obtain maximum thickness and brightness in Characterization of mechanically alloyed Fe,,._,Si, and chromium plating, 277 Fe,, .Si,, ND, nanocrystalline powders, 554 Ploughing Natural graphite A novel finned micro-groove array structure and Effect of different carbon fillers on the properties of forming process, 548 graphite composite bipolar plate, 184 Plunge Nd:YAG laser Experimental and numerical investigation of the Process optimization in laser surface structuring of plunge stage in friction stir welding, 411 alumina, 498 Poisson’s ratio Negative incremental forming Some investigation on the cold deformation behaviour Tool and lubrication for negative incremental forming of sintered iron-0.8% carbon alloy powder preforms, of a commercially pure titanium sheet, 193 542 Nonlinear deformation theory Polymer metal hybrids Advanced and automatic determination of initial Computational analysis of injection-molding residual- configuration of curved shell plates for flame stress development in direct-adhesion polymer-to- bending, 232 metal hybrid body-in-white components, 19 Nonlinearly stretching surfaces Polymeric coatings Similarity solutions for flow and heat transfer of a Aging effect on thermal, mechanical and tribological quiescent fluid over a nonlinearly stretching behaviour of polymeric coatings used for pipeline surface, 176 application, 404 Porcelain Optimal surface development Effect of natural zeolite addition on sintering kinetics Advanced and automatic determination of initial of porcelain bodies, 465 configuration of curved shell plates for flame Porosity bending, 232 An intelligent system for predicting HPDC process Optimization variables in interactive environment, 72 Development of a flexible high-speed EDM technology Precipitation with geometrical transform optimization, 355 Synthesis and characterization of spherical silica Process optimization in laser surface structuring of precipitated via emulsion route, 121 Precision control alumina, 498 Precision control of explosive forming for metallic Optimized cost Optimization of machining conditions for effective decorating sphere, 449 turning of E0300 alloy steel, 147 Preform Optimum filter selection Preform optimization of pad section of front axle beam Empirical modelling of grinding force based on using DEFORM, 102 multivariate analysis, 420 Primary silicon Organic coating The effect of average cooling rates on the A novel method of electroless plating on AZ31 microstructure of the Al-20% Si high pressure die magnesium alloy sheet, 310 casting alloy used for monolithic cylinder blocks, 333 Pad roughness Probabilistic modelling Pad roughness variation and its effect on material Multivariate modelling of variability in sheet metal removal profile in ceria-based CMP slurry, 287 forming, 1 Pad section Process modeling Preform optimization of pad section of front axle beam Statistical modeling of the electrical characteristics for using DEFORM, 102 HfO, thin films grown by MOMBE for high-k Particle reinforced aluminum matrix composites dielectric applications, 454 Workpiece surface quality when ultra-precision Process optimisation turning of SiC_/Al composites, 166 Characterization of the influences of FSW tool Particle size distribution and surface morphology geometry on welding forces and weld tensile Synthesis and characterization of spherical silica strength using an instrumented tool, 46 precipitated via emulsion route, 121 Protrusion length Phase transformation Modeling of gas flow inside and outside the nozzle Numerical investigation on multiphase coupling heat used in spray deposition, 471 conduction with subcooling boiling boundary conditions and effect of shape during quenching Quality issues process, 86 An experimental study on the quality of flow-formed Photocatalysis AA6061 tubes, 321 Synthesis and photocatalytic characterization of Quasi-isostatic forging titania-supported bamboo charcoals by using Large UFG Al alloy plates from cryomilling, 37 sol-gel method, 326 Quenching Plating brightness Numerical investigation on multiphase coupling heat Statistical optimization of process parameters to conduction with subcooling boiling boundary obtain maximum thickness and brightness in conditions and effect of shape during quenching chromium plating, 277 process, 86 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 569 Radial basis function network Experimental identification of a thermo-mechanical Evaluation of thrust force and surface roughness in model for air bending, 267 drilling composite material using Taguchi analysis SiC and neural network, 342 Studies on compositionally graded silicon carbide Rapid solidification dispersed composite surface on mild steel The effect of average cooling rates on the developed by laser surface cladding, microstructure of the Al-20% Si high pressure die 505 casting alloy used for monolithic cylinder blocks, Simulation 333 Preform optimization of pad section of front axle beam Reaction efficiency using DEFORM, 102 Advanced CAD integrated approach for 3D Prediction of welding distortion in a curved plate electrochemical machining simulations, 58 structure by means of elastic finite element Recrystallization method, 252 Comparison of recrystallization behaviour of cold Sinterability deformed acicular ferrite produced by conventional Effect of sintering and melt casting methods on processing and direct strip casting, 518 properties of a machinable fluor-phlogopite Regression model glass-ceramic, 113 Statistical modeling of the electrical characteristics for Sintering HfO, thin films grown by MOMBE for high-k Microwave sintering of alumina-zirconia nano- dielectric applications, 454 composites, 513 Relative electrode wear rate Sintering activation energy The characteristics of cutting pipe mechanism with Effect of natural zeolite addition on sintering kinetics multi-electrodes in EDM, 461 of porcelain bodies, 465 Residual stresses Sintering kinetics Computational analysis of injection-molding residual- Effect of natural zeolite addition on sintering kinetics stress development in direct-adhesion polymer-to- of porcelain bodies, 465 metal hybrid body-in-white components, 19 Sliding Characteristics of diamond-like carbon film deposited An experimental investigation on contact length by filter arc deposition, 117 during minimum quantity lubrication (MQL) Bending of tube and section made of strain-hardening machining, 221 materials, 372 Soft magnetic properties Preparation of fatigue specimens with controlled Characterization of mechanically alloyed Fe,,,_,Si, and surface characteristics, 396 Fe,, Si, Nb, nanocrystalline powders, 554 Response surface methodology Solidification time Preparation of fatigue specimens with controlled An intelligent system for predicting HPDC process surface characteristics, 396 variables in interactive environment, 72 Analysis of parametric influence on delamination in Spherical silica high-speed drilling of carbon fiber reinforced plastic Synthesis and characterization of spherical silica composites, 431 precipitated via emulsion route, 121 Robustness Springback Multivariate modelling of variability in sheet metal Multivariate modelling of variability in sheet metal forming, 1 forming, 1 Rolling strain Statistical analysis of finite element modeling in sheet Effect of rolling strain on transformation induced metal forming and springback analysis, 129 plasticity of austenite to martensite in a high-alloy Experimental identification of a thermo-mechanical austenitic steel, 349 model for air bending, 267 Bending of tube and section made of strain-hardening Scanning electron beam materials, 372 Scanning electron beam brazing of thin-wall capillary Statistical analysis tube-sheet structure, 301 Statistical modeling of the electrical characteristics for Seizure HfO, thin films grown by MOMBE for high-k An experimental investigation on contact length dielectric applications, 454 during minimum quantity lubrication (MQL) Statistical design machining, 221 Statistical optimization of process parameters to Shape quality obtain maximum thickness and brightness in Influence of process parameters on shape quality and chromium plating, 277 area fraction in round-to-hexagonal composite wire Steel sheets drawing, 137 Comparison of the experimental and the numerically Shaped metal deposition (SMD) predicted mechanical damage in the sheet forming Shaped metal deposition of a nickel alloy for aero of steel, 13 engine applications, 439 Stochastic modeling Sheet forming Predicting of the Liiders’ bands in the processing of TH Comparison of the experimental and the numerically material in computer environment by means of predicted mechanical damage in the sheet forming stochastic modeling, 154 of steel, 13 Strip casting Sheet metal forming Comparison of recrystallization behaviour of cold Multivariate modelling of variability in sheet metal deformed acicular ferrite produced by conventional forming, 1 processing and direct strip casting, 518 570 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Subcooling boiling heat transfer Tool Numerical investigation on multiphase coupling heat Tool and lubrication for negative incremental forming conduction with subcooling boiling boundary of a commercially pure titanium sheet, 193 conditions and effect of shape during quenching Tool design process, 86 Characterization of the influences of FSW tool Superconductor geometry on welding forces and weld tensile Influence of process parameters on shape quality and strength using an instrumented tool, 46 area fraction in round-to-hexagonal composite wire Tool life drawing, 137 Optimization of machining conditions for effective Superfinishing turning of E0300 alloy steel, 147 Experimental analysis on evolution of superfinished Tool torque surface texture, 365 Characterization of the influences of FSW tool Surface geometry on welding forces and weld tensile Studies on compositionally graded silicon carbide strength using an instrumented tool, 46 dispersed composite surface on mild steel Tool wear developed by laser surface cladding, 505 Investigation of tool wear and cutting force in cryogenic Surface quality machining using design of experiments, 95 Workpiece surface quality when ultra-precision Transformation induced plasticity (TRIP) turning of SiC,/Al composites, 166 Effect of rolling strain on transformation induced Tool and lubrication for negative incremental forming plasticity of austenite to martensite in a high-alloy of a commercially pure titanium sheet, 193 austenitic steel, 349 Surface roughness TRIP steel Evaluation of thrust force and surface roughness in Statistical analysis of finite element modeling in sheet drilling composite material using Taguchi analysis metal forming and springback analysis, 129 and neural network, 342 TRIP-aided steel Preparation of fatigue specimens with controlled Effect of cold rolling reduction and intercritical surface characteristics, 396 annealing temperature on the bulk texture of two Surface texture TRIP-aided steel sheets, 293 Experimental analysis on evolution of superfinished Tube bending surface texture, 365 Bending of tube and section made of strain-hardening materials, 372 Taguchi method Tube bulge test Optimization of machining conditions for effective The determination of flow stress of tubular material turning of E0300 alloy steel, 147 for hydroforming applications, 381 Evaluation of thrust force and surface roughness in Tube hydroforming drilling composite material using Taguchi analysis The determination of flow stress of tubular material and neural network, 342 for hydroforming applications, 381 Process optimization in laser surface structuring of Tube-sheet structure alumina4,9 8 Scanning electron beam brazing of thin-wall capillary Taguchi methods tube-sheet structure, 301 Development of a flexible high-speed EDM technology Turning with geometrical transform optimization, 355 Investigation of tool wear and cutting force in Texture cryogenic machining using design of experiments, Effect of cold rolling reduction and intercritical 95 annealing temperature on the bulk texture of two TRIP-aided steel sheets, 293 Ultra-fine grained microstructure Thermal radiation Large UFG Al alloy plates from cryomilling, 37 Similarity solutions for flow and heat transfer of a Ultra-precision quiescent fluid over a nonlinearly stretching Workpiece surface quality when ultra-precision surface, 176 turning of SiC,/Al composites, 166 Thick films Ultrashort laser ablation Electrophoretic deposition of Bay 77Cay ,, TIO, Study of ultrashort laser ablation of metals by nanopowders, 526 molecular dynamics simulation and experimental Thrust force method, 202 Evaluation of thrust force and surface roughness in Ultra-thin wall drilling composite material using Taguchi analysis Precision control of explosive forming for metallic and neural network, 342 decorating sphere, 449 Ti-6Al-4V Corrosion behaviour of laser gas-nitrided Ti-6Al-4V Variation alloy in nitric acid solution, 315 Multivariate modelling of variability in sheet metal Tinplate processing forming, 1 Predicting of the Liiders’ bands in the processing of TH Viscosity prediction material in computer environment by means of Apparent viscosity prediction of alumina-paraffin stochastic modeling, 154 suspensions using artificial neural networks, 208 Titania Viscous dissipation Synthesis and photocatalytic characterization of Similarity solutions for flow and heat transfer of a titania-supported bamboo charcoals by using quiescent fluid over a nonlinearly stretching sol-gel method, 326 surface, 176

ebook img

Journal of Materials Processing Technology 2008: Vol 203 Index PDF

2008·2.7 MB·English
by  
#periodicals #sim_microfilm #pub_journal-of-materials-processing-technology
Save to my drive
Quick download
Download
Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Journal of Materials Processing Technology 2008: Vol 203 Index

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 561-562 available at www.sciencedirect.com “*=* ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Author Index of Volume 203 Abachi, P., 554 Dahotre, N.B., 498 Hsieh, C.-T., 326 Abouei, V., 107 Daneshi, G., 293 Hsieh, S.F., 461 Abrao, A.M., 431 Daniel, D., 480 Huang, Z., 310 Acselrad, O., 13 Dar, N.U., 193 Hussain, G., 193 Aggarwal, R.K., 184 Davim, J.P., 431, 537 Ahn, B., 37 de Souza, T., 1 James, M.N., 46 Akbarzadeh, A., 293 de Vicente, F.S., 526 Jeong, H., 287 Aniolek, M., 333 Deconinck, J., 58 Jesionowski, T., 121 Antonelli, E., 526 Demirkiran, A.S., 465 Jeyakumar, M., 471 Arabi, H., 349 Deng, D., 252 Joseph Davidson, M., 321 Artir, R., 465 Deng, X.-X., 548 Asgari, S.A., 129 Dhakate, S.R., 184 Kalyan Kumar, K.V.B.S., 95 Avci, E., 465 Dhami, T.L., 184 Kannan, A.R., 542 Ayedi, H.F., 404 Dingle, M., 129 Kapsa, P., 404 Dorochenko, A., 58 Karnik, S.R., 431 Dutta Majumdar, J., 50S Kasprzak, W., 333 Bacha, A., 480 KhatibZadeh, S., 113 Bache, M.R., 439 El Domiaty, A., 372 Kheirandish, S., 107 Bahrami, A., 554 El Megharbel, A., 372 Khosravani, A., 349 Balasubramanian, K., 321 El Nasser, G.A., 372 Kim, H., 287 Baradai, C., 80 Elhalouani, F., 80 Kim, K.S., 232 Barisic, B., 154 Elleuch, K., 404 Kiminami, R.H.G.A., 513 Bataller, R.C., 176 Bayramoglu, M., 277 Elmustafa, A.A., 411 Klocker, H., 480 Bigdeli Karimi, M., 349 Emadoddin, E., 293 Ko, Y.-D., 454 Blignault, C., 46 Erdmann, M., 19 Kumar, S., 471 Kurita, H., 333 Bortels, L., 58 Fang, H., 216 Kurnia, W., 241 Bortot, P., 381 Farris, T.N., 365 Kuroda, M., 396 Ferry, M., 518 Kweon, K.E., 454 Canteli, J.A., 267 Fu, Y.C., 166 Cantero, J.L., 267 Lajimi, A.M., 72 Ceretti, E., 381 Gaitonde, V.N., 431 Lavernia, E.)J., 37 Cetlin, P.R., 13 Gao, L., 193 Lee, H., 287 Chandrasekar, S., 365 Ge, Y.F., 166 Lee, J.H., 454 Chang, S.-H., 365 Geren, N., 277 Li, G., 19 Chen, C., 202 Giardini, C., 381 Li, Z., 449 Chen, J., 86 Gindy, N., 420 Liang, W., 252 Chen, J.-C., 548 Gordani, G.R., 315 Lin, M.H., 461 Chen, S.L., 461 Grujicic, M., 19 Liu, L., 548 Chen, X., 420 Guermazi, N., 404 Liu, Q., 420 Chen, Y., 301 Gupta, D.K., 184 Liu, X., 202 Chen, Y.-C., 117 Gupta, G.S., 471 Liu, X.-K., 548 Cheng, B., 449 Lu, F., 301 Chi, Y., 548 Han, S., 117 Luo, S.B., 166 Chiou, S.Y., 461 Hasheminia, S., 113 Choudhury, S.K., 95 Hattingh, D.G., 46 Madaah-Hosseini, H.R., 554 Clark, D., 439 Hayat, N., 193 Mandal, S., 411 Clemente, V.C., 537 Hernandes, A.C., 526 Manna, A., 147 Correia, A.E., 431 Hocheng, H., 342 Manna, I., 505 Cui, J., 310 Hodgson, P.D., 129 Marrow, T.J., 396 Cui, Z., 193 Holzleitner, J., 19 Math, M.D., 154 Elsevier B.V. doi:10.1016/S0924-0136(08)00423-8 562 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 561-562 Mathur, R.B., 184 Ranjbar, K., 107 Tsao, C.C., 342 Menezes, R.R., 513 Razavi, R.S., 315 Tzeng, Y.-f., 355 Miguélez, M.H., 267 Rice, J., 411 Milad, M., 80 Rolfe, B., 1 Vahidi, A., 19 Miraghaei, S., 554 Rolfe, B.F., 129 Van den Bossche, B., 58 Monirvaghefi, M., 315 Rubim, G., 13 van Niekerk, T.l., 46 Moon, T.-H., 454 Rubio, J.C., 431 Van Tyne, C.J., 532 Moon, Y.H., 532 Ryu, C., 232 Varyukhin, V., 305 Murakawa, H., 252 Myoung, J.-M., 454 Saghafian, H., 107 Wan, Z.-P., 548 Salehi, M., 315 Wang, D.-Y., 117 Nath, A.K., 505 Salodkar, S., 147 Wang, Y., 420 Newbery, A.P., 37 Samant, A.N., 498 Wei, J., 86 Norasethasopon, S., 137 Samedani, M., 113 Weng, K.-W., 117 Novak, F., 208 Samei, J., 349 Whittaker, M.T., 439 Novak, S., 208 Satish, G.D., 102 Wu, C.-F., 326 Nutt, S.R., 37 Sellappan, V., 19 Wu, C.-H., 326 Seyr, N., 19 Ohdar, R.K., 102 Shahryari, A., 389 Olofsson, D., 221 Shanmugam, S., 542 Xirouchakis, P., 72 Xu, J.H., 166 Onat, B., 277 Shr, J.-F., 326 Silva, R.S., 526 Xu, W., 216, 518 Paital, S.R., 498 Silva, S., 537 Pakshir, M., 389 Singh, N.K., 102 Yamagata, H., 333 Pandey, K.S., 542 Sokolowski, J.H., 333 Yang, H., 166 Pandurangan, B., 19 Spuskanyuk, A., 305 Yao, S., 301 Pang, Y.C., 193 Spuskanyuk, V., 305 Yekta, B.E., 113 Pao, P.S., 37 Sun, D., 86 Yeo, S.H., 241 Park, B., 287 Yi, H.K., 532 Park, K., 287 Tagore, G.R.N., 321 Yun, |., 454 Pavlina, E.J., 532 Tan, P.C., 241 PepelnjakT,. , 154 Tang, Y., 548 Zanatta, A.R., 526 Pereira, I.M., 13 Tasdelen, B., 221 Zhang, R., 449 Pereira, M., 129 Thordenberg, H., 221 Zhang, Y., 202, 301 Purcar, M., 58 Tong, L., 86 Zhao, H., 310 Tong, Z., 449 Zhao, L., 202 Rai, J.K., 72 Topping, T.D., 37 Zhou, W., 202 Ramesh Chandra, B., 50S Torkar, D., 208 Zreiba, N., 80 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 available at www.sciencedirect.com “°>* ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Subject Index of Volume 203 AA6061 alloy Analysis of variance An experimental study on the quality of flow-formed Preparation of fatigue specimens with controlled AA6061 tubes, 321 surface characteristics, 396 ABAQUS ANN Experimental and numerical investigation of the An intelligent system for predicting HPDC process plunge stage in friction stir welding, 411 variables in interactive environment, 72 Acicular ferrite ANOVA Comparison of recrystallization behaviour of cold Analysis of parametric influence on delamination in deformed acicular ferrite produced by conventional high-speed drilling of carbon fiber reinforced plastic processing and direct strip casting, 518 composites, 431 Active resistance Area fraction Analysis of the variation regularity of the parameters Influence of process parameters on shape quality and of the discharge circuit with the distance between area fraction in round-to-hexagonal composite wire workpiece and inductor for electromagnetic drawing, 137 forming processes, 216 Artificial neural networks Adhesion Apparent viscosity prediction of alumina-paraffin Characteristics of diamond-like carbon film deposited suspensions using artificial neural networks, by filter arc deposition, 117 208 Adsorptive properties Aspiration pressure Synthesis and characterization of spherical silica Modeling of gas flow inside and outside the nozzle precipitated via emulsion route, 121 used in spray deposition, 471 Aerospace components Austenitic stainless steel Shaped metal deposition of a nickel alloy for aero The effect of cold work on structure and properties of engine applications, 439 AISI 304 stainless steel, 80 Aging impact Austenitic steel Aging effect on thermal, mechanical and tribological Effect of rolling strain on transformation induced behaviour of polymeric coatings used for pipeline plasticity of austenite to martensite in a high-alloy application, 404 austenitic steel, 349 Air Automatic mesh generation An experimental investigation on contact length Advanced and automatic determination of initial during minimum quantity lubrication (MQL) configuration of curved shell plates for flame machining, 221 bending, 232 Air bending Automotive structural components Experimental identification of a thermo-mechanical Computational analysis of injection-molding residual- model for air bending, 267 stress development in direct-adhesion polymer-to- Al-20% Si alloy metal hybrid body-in-white components, 19 The effect of average cooling rates on the microstructure of the Al-20% Si high pressure die Bamboo charcoals casting alloy used for monolithic cylinder Synthesis and photocatalytic characterization of blocks, 333 titania-supported bamboo charcoals by using Alloy 718 sol-gel method, 326 Shaped metal deposition of a nickel alloy for aero Barium calcium titanate engine applications, 439 Electrophoretic deposition of Ba, ,,Ca,,,TiIO, nano Alumina powders, 526 Process optimization in laser surface structuring of Brazing technology parameter alumina, 498 Scanning electron beam brazing of thin-wall capillary Microwave sintering of alumina-zirconia nano tube-sheet structure, 301 composites, 513 Aluminum alloy tube CAD model reconstruction Application of a combined heating system for the Advanced CAD integrated approach for 3D electro- warm hydroforming of lightweight alloy tubes, 532 chemical machining simulations, 58 Elsevier B.V. doi:10.1016/S0924-0136(08)00424-X 564 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Calculation of pressure Control Development of _ the equal-channel angular Scanning electron beam brazing of thin-wall capillary hydroextrusion, 305 tube-sheet structure, 301 Candle stick drill Convergent nozzle configurations Evaluation of thrust force and surface roughness in Modeling of gas flow inside and outside the nozzle drilling composite material using Taguchi analysis used in spray deposition, 471 and neural network, 342 Copper film Carbon black A novel method of electroless plating on AZ31 Effect of different carbon fillers on the properties of magnesium alloy sheet, 310 graphite composite bipolar plate, 184 Corrosion Carbon fiber reinforced plastics (CFRP) A novel method of electroless plating on AZ31 Analysis of parametric influence on delamination in magnesium alloy sheet, 310 high-speed drilling of carbon fiber reinforced plastic Corrosion behaviour of laser gas-nitrided Ti-6Al-4V composites, 431 alloy in nitric acid solution, 315 Carbon fibers Studies on compositionally graded silicon carbide Effect of different carbon fillers on the properties of dispersed composite surface on mild steel graphite composite bipolar plate, 184 developed by laser surface cladding, 505 Ceramics Cryogenic machining Apparent viscosity prediction of alumina-paraffin Investigation of tool wear and cutting force in cryogenic suspensions using artificial neural networks, 208 machining using design of experiments, 95 Process optimization in laser surface structuring of Cutting depth alumina, 498 Preparation of fatigue specimens with controlled Ceria slurry surface characteristics, 396 Pad roughness variation and its effect on material Cutting force removal profile in ceria-based CMP slurry, 287 Investigation of tool wear and cutting force in cryogenic Chemical composition machining using design of experiments, 95 Effect of cold rolling reduction and intercritical Cutting pipe mechanism annealing temperature on the bulk texture of two The characteristics of cutting pipe mechanism with TRIP-aided steel sheets, 293 multi-electrodes in EDM, 461 Chemical mechanical polishing Cylinder block Pad roughness variation and its effect on material The effect of average cooling rates on the removal profile in ceria-based CMP slurry, 287 microstructure of the Al-20% Si high pressure die Chromium plating casting alloy used for monolithic cylinder blocks, Statistical optimization of process parameters to 333 obtain maximum thickness and brightness in chromium plating, 277 3D FEM Cladding Influence of process parameters on shape quality and Studies on compositionally graded silicon carbide area fraction in round-to-hexagonal composite wire dispersed composite surface on mild steel drawing, 137 developed by laser surface cladding, 505 3D modelling Cold deformation Advanced CAD integrated approach for 3D Some investigation on the cold deformation behaviour electrochemical machining simulations, 58 of sintered iron-0.8% carbon alloy powder preforms, Decorating sphere 542 Precision control of explosive forming for metallic Cold rolled sheet decorating sphere, 449 Effect of cold rolling reduction and intercritical Degradation annealing temperature on the bulk texture of two Aging effect on thermal, mechanical and tribological TRIP-aided steel sheets, 293 behaviour of polymeric coatings used for pipeline Cold rolling application, 404 The effect of cold work on structure and properties of Delamination AISI 304 stainless steel, 80 Analysis of parametric influence on delamination in Combined heating high-speed drilling of carbon fiber reinforced plastic Application of a combined heating system for the composites, 431 warm hydroforming of lightweight alloy tubes, 532 Drilling investigation of MDF (medium density Composite bipolar plate fibreboard), 537 Effect of different carbon fillers on the properties of Delamination wear graphite composite bipolar plate, 184 An investigation of the wear behaviour of 0.2% C dual Composite material phase steels, 107 Evaluation of thrust force and surface roughness in Densification drilling composite material using Taguchi analysis Some investigation on the cold deformation behaviour and neural network, 342 of sintered iron-0.8% carbon alloy powder preforms, Computer-aided design 542 Advanced CAD integrated approach for 3D Design of Experiment electrochemical machining simulations, 58 Statistical analysis of finite element modeling in sheet Contact length metal forming and springback analysis, 129 An experimental investigation on contact length Diamond turning during minimum quantity lubrication (MQL) Workpiece surface quality when _ ultra-precision machining, 221 turning of SiC_/Al composites, 166 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Diamond-like carbon Electrical resistivity Characteristics of diamond-like carbon film deposited Effect of different carbon fillers on the properties of by filter arc deposition, 117 graphite composite bipolar plate, 184 Die design Electrochemical machining Preform optimization of pad section of front axle beam Advanced CAD integrated approach for 3D using DEFORM, 102 electrochemical machining simulations, 58 Discharging current Electrode shape change Analysis of the variation regularity of the parameters Advanced CAD integrated approach for 3D of the discharge circuit with the distance between electrochemical machining simulations, 58 workpiece and inductor for electromagnetic Electroless plating forming processes, 216 A novel method of electroless plating on AZ31 Distance magnesium alloy sheet, 310 Analysis of the variation regularity of the parameters Electromagnetic field of the discharge circuit with the distance between Influence of a modulated electromagnetic field on workpiece and inductor for electromagnetic fouling in a double-pipe heat exchanger, 389 forming processes, 216 Electrophoretic deposition Drawing stress Electrophoretic deposition of Bay ,,Cay ,,TI0, Influence of process parameters on shape quality and nanopowders, 526 area fraction in round-to-hexagonal composite wire Electro-thermal model drawing, 137 Critical assessment and numerical comparison of Drilling electro-thermal models in EDM, 241 Evaluation of thrust force and surface roughness in Elovich kinetic model drilling composite material using Taguchi analysis Synthesis and photocatalytic characterization of and neural network, 342 titania-supported bamboo charcoals by using Drilling investigation of MDF (medium density sol-gel method, 326 fibreboard), 537 Emulsion Dry Synthesis and characterization of spherical silica An experimental investigation on contact length precipitated via emulsion route, 121 during minimum quantity lubrication (MQL) Energy dispersive spectroscopy machining, 221 Experimental and numerical investigation of the Dual phase steel plunge stage in friction stir welding, 411 An investigation of the wear behaviour of 0.2% C dual Equal-channel angular extrusion phase steels, 107 Development of the equal-channel angular Ductile fracture hydroextrusion, 305 A novel finned micro-groove array structure and Equivalent inductance forming process, 548 Analysis of the variation regularity of the parameters Ductility of the discharge circuit with the distance between Metal ductility at low stress triaxiality application to workpiece and inductor for electromagnetic sheet trimming, 480 forming processes, 216 Dynamic programming Evolution Optimization of machining conditions for effective Experimental analysis on evolution of superfinished turning of E0300 alloy steel, 147 surface texture, 365 Explosive forming Precision control of explosive forming for metallic E0300 alloys steel decorating sphere, 449 Optimization of machining conditions for effective Extrusion turning of E0300 alloy steel, 147 Large UFG Al alloy plates from cryomilling, 37 EBSD A novel finned micro-groove array structure and Comparison of recrystallization behaviour of cold forming process, 548 deformed acicular ferrite produced by conventional processing and direct strip casting, 518 FE simulations Effect of shape The determination of flow stress of tubular material Numerical investigation on multiphase coupling heat for hydroforming applications, 381 conduction with subcooling boiling boundary Feed rate conditions and effect of shape during quenching Preparation of fatigue specimens with controlled process, 86 surface characteristics, 396 Elastic plastic material Ferroelectric Metal ductility at low stress triaxiality application to Electrophoretic deposition of Bay 77Cap >, TI0, sheet trimming, 480 nanopowders, 526 Electrical discharge machining Ferromagnetic The characteristics of cutting pipe mechanism with The effect of cold work on structure and properties of multi-electrodes in EDM, 461 AISI 304 stainless steel, 80 Electrical discharge machining (EDM) Filling time Critical assessment and numerical comparison of An intelligent system for predicting HPDC process electro-thermal models in EDM, 241 variables in interactive environment, 72 Development of a flexible high-speed EDM technology Filter arc deposition with geometrical transform optimization, Characteristics of diamond-like carbon film deposited 355 by filter arc deposition, 117 566 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Finite element analysis Hardness Comparison of the experimental and the numerically Effect of rolling strain on transformation induced predicted mechanical damage in the sheet forming plasticity of austenite to martensite in a high-alloy of steel, 13 austenitic steel, 349 Finite element method Heat conduction Advanced CAD integrated approach for 3D Numerical investigation on multiphase coupling heat electrochemical machining simulations, 58 conduction with subcooling boiling boundary Prediction of welding distortion in a curved plate conditions and effect of shape during quenching structure by means of elastic finite element process, 86 method, 252 Heat transfer Finite elements Influence of a modulated electromagnetic field on Advanced and automatic determination of initial fouling in a double-pipe heat exchanger, 389 configuration of curved shell plates for flame Heat treatment bending, 232 An investigation of the wear behaviour of 0.2% C dual Metal ductility at low stress triaxiality application to phase steels, 107 sheet trimming, 480 Heating element Finned surface Application of a combined heating system for the A novel finned micro-groove array structure and warm hydroforming of lightweight alloy tubes, 532 forming process, 548 Hexagonal composite wire Flow-forming Influence of process parameters on shape quality and An experimental study on the quality of flow-formed area fraction in round-to-hexagonal composite wire AA6061 tubes, 321 drawing, 137 Fluor-phlogopite HfO, Effect of sintering and melt casting methods on Statistical modeling of the electrical characteristics for properties of a machinable fluor-phlogopite HfO, thin films grown by MOMBE for high-k glass-ceramic, 113 dielectric applications, 454 Force footprint High pressure die casting Characterization of the influences of FSW tool The effect of average cooling rates on the geometry on welding forces and weld tensile microstructure of the Al-20% Si high pressure die strength using an instrumented tool, 46 casting alloy used for monolithic cylinder blocks, 333 Force monitoring High temperature Characterization of the influences of FSW tool Experimental identification of a thermo-mechanical geometry on welding forces and weld tensile model for air bending, 267 strength using an instrumented tool, 46 High-speed drilling Forming limit Analysis of parametric influence on delamination in Some investigation on the cold deformation behaviour high-speed drilling of carbon fiber reinforced plastic of sintered iron-0.8% carbon alloy powder preforms, composites, 431 542 Hot isostatic pressing Fouling Large UFG Al alloy plates from cryomilling, 37 Influence of a modulated electromagnetic field on HPDC fouling in a double-pipe heat exchanger, 389 An intelligent system for predicting HPDC process Fracture mechanisms variables in interactive environment, 72 Metal ductility at low stress triaxiality application to Hydroextrusion sheet trimming, 480 Development of the equal-channel angular Friction hydroextrusion, 305 Development of the equal-channel angular Hygrothermal aging hydroextrusion, 305 Aging effect on thermal, mechanical and tribological Friction stir welding behavicur of polymeric coatings used for pipeline Characterization of the influences of FSW tool application, 404 geometry on welding forces and weld tensile strength using an instrumented tool, 46 Ideal function Front axle beam Development of a flexible high-speed EDM technology Preform optimization of pad section of front axle beam with geometrical transform optimization, 355 using DEFORM, 102 Induction heating FSW Application of a combined heating system for the Experimental and numerical investigation of the warm hydroforming of lightweight alloy tubes, 532 plunge stage in friction stir welding, 411 Inherent deformation Prediction of welding distortion in a curved plate Gap structure by means of elastic finite element Prediction of welding distortion in a curved plate method, 252 structure by means of elastic finite element Instrumented tool method, 252 Characterization of the influences of FSW tool Gas atomization geometry on welding forces and weld tensile Modeling of gas flow inside and outside the nozzle strength using an instrumented tool, 46 used in spray deposition, 471 Intercritical annealing Grinding force modelling Effect of cold rolling reduction and intercritical Empirical modelling of grinding force based on annealing temperature on the bulk texture of two multivariate analysis, 420 TRIP-aided steel sheets, 293 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Interface element Mechanical properties Prediction of welding distortion in a curved plate Large UFG Al alloy plates from cryomilling, 37 structure by means of elastic finite element Effect of different carbon fillers on the properties of method, 252 graphite composite bipolar plate, 184 Interlayer Aging effect on thermal, mechanical and tribological A novel method of electroless plating on AZ31 behaviour of polymeric coatings used for pipeline magnesium alloy sheet, 310 application, 404 Medium density fibreboard (MDF) Johnson-Cook law Drilling investigation of MDF (medium density Experimental and numerical investigation of the fibreboard), 537 plunge stage in friction stir welding, 411 Melt casting Effect of sintering and melt casting methods on Laminar boundary layer properties of a machinable fluor-phlogopite Similarity solutions for flow and heat transfer of a glass-ceramic, 113 quiescent fluid over a nonlinearly stretching Methylene blue surface, 176 Synthesis and photocatalytic characterization of Laplace equation titania-supported bamboo charcoals by using Advanced CAD integrated approach for 3D sol-gel method, 326 electrochemical machining simulations, 58 Micro-groove Laser A novel finned micro-groove array structure and Studies on compositionally graded silicon carbide forming process, 548 , dispersed composite surface on mild steel Microstructure ceveloped by laser surface cladding, 505 An investigation of the wear behaviour of 0.2% C dual Laser gas nitriding phase steels, 107 Corrosion behaviour of laser gas-nitrided Ti-6Al-4V The effect of average cooling rates on the alloy in nitric acid solution, 315 microstructure of the Al-20% Si high pressure die Liiders’ bands (stretcher strains) casting alloy used for monolithic cylinder blocks, 333 Predicting of the Liiders’ bands in the processing of TH Shaped metal deposition of a nickel alloy for aero material in computer environment by means of engine applications, 439 stochastic modeling, 154 Microwave processing Low carbon steel Microwave sintering of alumina-zirconia nano- Comparison of recrystallization behaviour of cold composites, 513 deformed acicular ferrite produced by conventional Mild steel processing and direct strip casting, 518 Studies on compositionally graded silicon carbide Low-pressure injection moulding dispersed composite surface on mild steel Apparent viscosity prediction of alumina-paraffin developed by laser surface cladding, 505 suspensions using artificial neural networks, 208 Modeling of gas flow Lubricant Modeling of gas flow inside and outside the nozzle Tool and lubrication for negative incremental forming used in spray deposition, 471 of a commercially pure titanium sheet, 193 Modelling Lubrication method Experimental identification of a thermo-mechanical Tool and lubrication for negative incremental forming model for air bending, 267 of a commercially pure titanium sheet, 193 Molecular dynamics Study of ultrashort laser ablation of metals by Magnetic measurement molecular dynamics simulation and experimental Effect of rolling strain on transformation induced method, 202 plasticity of austenite to martensite in a high-alloy MOMBE austenitic steel, 349 Statistical modeling of the electrical characteristics for Marciniak test HfO, thin films grown by MOMBE for high-k Comparison of the experimental and the numerically dielectric applications, 454 predicted mechanical damage in the sheet forming Monocrystalline copper of steel, 13 Study of ultrashort laser ablation of metals by Martensitic transformation molecular dynamics simulation and experimental The effect of cold work on structure and properties of method, 202 AISI 304 stainless steel, 80 Moving cathode tools Material removal Advanced CAD integrated approach for 3D Pad roughness variation and its effect on material electrochemical machining simulations, 58 removal profile in ceria-based CMP slurry, 287 MQL Material removal rate An experimental investigation on contact length The characteristics of cutting pipe mechanism with during minimum quantity lubrication (MQL) multi-electrodes in EDM, 461 machining, 221 Mechanical alloying Multivariate regression Characterization of mechanically alloyed Fe, ,Si, and Empirical modelling of grinding force based on Fe,, .Si,,,;Nb, nanocrystalline powders, 554 multivariate analysis, 420 Mechanical damage Comparison of the experimental and the numerically Nanocomposite predicted mechanical damage in the sheet forming Microwave sintering of alumina-zirconia nano- of steel, 13 composites, 513 568 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Nanocrystalline powder Plating thickness Large UFG Al alloy plates from cryomilling, 37 Statistical optimization of process parameters to Nanostructured Fe-Si powder obtain maximum thickness and brightness in Characterization of mechanically alloyed Fe,,._,Si, and chromium plating, 277 Fe,, .Si,, ND, nanocrystalline powders, 554 Ploughing Natural graphite A novel finned micro-groove array structure and Effect of different carbon fillers on the properties of forming process, 548 graphite composite bipolar plate, 184 Plunge Nd:YAG laser Experimental and numerical investigation of the Process optimization in laser surface structuring of plunge stage in friction stir welding, 411 alumina, 498 Poisson’s ratio Negative incremental forming Some investigation on the cold deformation behaviour Tool and lubrication for negative incremental forming of sintered iron-0.8% carbon alloy powder preforms, of a commercially pure titanium sheet, 193 542 Nonlinear deformation theory Polymer metal hybrids Advanced and automatic determination of initial Computational analysis of injection-molding residual- configuration of curved shell plates for flame stress development in direct-adhesion polymer-to- bending, 232 metal hybrid body-in-white components, 19 Nonlinearly stretching surfaces Polymeric coatings Similarity solutions for flow and heat transfer of a Aging effect on thermal, mechanical and tribological quiescent fluid over a nonlinearly stretching behaviour of polymeric coatings used for pipeline surface, 176 application, 404 Porcelain Optimal surface development Effect of natural zeolite addition on sintering kinetics Advanced and automatic determination of initial of porcelain bodies, 465 configuration of curved shell plates for flame Porosity bending, 232 An intelligent system for predicting HPDC process Optimization variables in interactive environment, 72 Development of a flexible high-speed EDM technology Precipitation with geometrical transform optimization, 355 Synthesis and characterization of spherical silica Process optimization in laser surface structuring of precipitated via emulsion route, 121 Precision control alumina, 498 Precision control of explosive forming for metallic Optimized cost Optimization of machining conditions for effective decorating sphere, 449 turning of E0300 alloy steel, 147 Preform Optimum filter selection Preform optimization of pad section of front axle beam Empirical modelling of grinding force based on using DEFORM, 102 multivariate analysis, 420 Primary silicon Organic coating The effect of average cooling rates on the A novel method of electroless plating on AZ31 microstructure of the Al-20% Si high pressure die magnesium alloy sheet, 310 casting alloy used for monolithic cylinder blocks, 333 Pad roughness Probabilistic modelling Pad roughness variation and its effect on material Multivariate modelling of variability in sheet metal removal profile in ceria-based CMP slurry, 287 forming, 1 Pad section Process modeling Preform optimization of pad section of front axle beam Statistical modeling of the electrical characteristics for using DEFORM, 102 HfO, thin films grown by MOMBE for high-k Particle reinforced aluminum matrix composites dielectric applications, 454 Workpiece surface quality when ultra-precision Process optimisation turning of SiC_/Al composites, 166 Characterization of the influences of FSW tool Particle size distribution and surface morphology geometry on welding forces and weld tensile Synthesis and characterization of spherical silica strength using an instrumented tool, 46 precipitated via emulsion route, 121 Protrusion length Phase transformation Modeling of gas flow inside and outside the nozzle Numerical investigation on multiphase coupling heat used in spray deposition, 471 conduction with subcooling boiling boundary conditions and effect of shape during quenching Quality issues process, 86 An experimental study on the quality of flow-formed Photocatalysis AA6061 tubes, 321 Synthesis and photocatalytic characterization of Quasi-isostatic forging titania-supported bamboo charcoals by using Large UFG Al alloy plates from cryomilling, 37 sol-gel method, 326 Quenching Plating brightness Numerical investigation on multiphase coupling heat Statistical optimization of process parameters to conduction with subcooling boiling boundary obtain maximum thickness and brightness in conditions and effect of shape during quenching chromium plating, 277 process, 86 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 569 Radial basis function network Experimental identification of a thermo-mechanical Evaluation of thrust force and surface roughness in model for air bending, 267 drilling composite material using Taguchi analysis SiC and neural network, 342 Studies on compositionally graded silicon carbide Rapid solidification dispersed composite surface on mild steel The effect of average cooling rates on the developed by laser surface cladding, microstructure of the Al-20% Si high pressure die 505 casting alloy used for monolithic cylinder blocks, Simulation 333 Preform optimization of pad section of front axle beam Reaction efficiency using DEFORM, 102 Advanced CAD integrated approach for 3D Prediction of welding distortion in a curved plate electrochemical machining simulations, 58 structure by means of elastic finite element Recrystallization method, 252 Comparison of recrystallization behaviour of cold Sinterability deformed acicular ferrite produced by conventional Effect of sintering and melt casting methods on processing and direct strip casting, 518 properties of a machinable fluor-phlogopite Regression model glass-ceramic, 113 Statistical modeling of the electrical characteristics for Sintering HfO, thin films grown by MOMBE for high-k Microwave sintering of alumina-zirconia nano- dielectric applications, 454 composites, 513 Relative electrode wear rate Sintering activation energy The characteristics of cutting pipe mechanism with Effect of natural zeolite addition on sintering kinetics multi-electrodes in EDM, 461 of porcelain bodies, 465 Residual stresses Sintering kinetics Computational analysis of injection-molding residual- Effect of natural zeolite addition on sintering kinetics stress development in direct-adhesion polymer-to- of porcelain bodies, 465 metal hybrid body-in-white components, 19 Sliding Characteristics of diamond-like carbon film deposited An experimental investigation on contact length by filter arc deposition, 117 during minimum quantity lubrication (MQL) Bending of tube and section made of strain-hardening machining, 221 materials, 372 Soft magnetic properties Preparation of fatigue specimens with controlled Characterization of mechanically alloyed Fe,,,_,Si, and surface characteristics, 396 Fe,, Si, Nb, nanocrystalline powders, 554 Response surface methodology Solidification time Preparation of fatigue specimens with controlled An intelligent system for predicting HPDC process surface characteristics, 396 variables in interactive environment, 72 Analysis of parametric influence on delamination in Spherical silica high-speed drilling of carbon fiber reinforced plastic Synthesis and characterization of spherical silica composites, 431 precipitated via emulsion route, 121 Robustness Springback Multivariate modelling of variability in sheet metal Multivariate modelling of variability in sheet metal forming, 1 forming, 1 Rolling strain Statistical analysis of finite element modeling in sheet Effect of rolling strain on transformation induced metal forming and springback analysis, 129 plasticity of austenite to martensite in a high-alloy Experimental identification of a thermo-mechanical austenitic steel, 349 model for air bending, 267 Bending of tube and section made of strain-hardening Scanning electron beam materials, 372 Scanning electron beam brazing of thin-wall capillary Statistical analysis tube-sheet structure, 301 Statistical modeling of the electrical characteristics for Seizure HfO, thin films grown by MOMBE for high-k An experimental investigation on contact length dielectric applications, 454 during minimum quantity lubrication (MQL) Statistical design machining, 221 Statistical optimization of process parameters to Shape quality obtain maximum thickness and brightness in Influence of process parameters on shape quality and chromium plating, 277 area fraction in round-to-hexagonal composite wire Steel sheets drawing, 137 Comparison of the experimental and the numerically Shaped metal deposition (SMD) predicted mechanical damage in the sheet forming Shaped metal deposition of a nickel alloy for aero of steel, 13 engine applications, 439 Stochastic modeling Sheet forming Predicting of the Liiders’ bands in the processing of TH Comparison of the experimental and the numerically material in computer environment by means of predicted mechanical damage in the sheet forming stochastic modeling, 154 of steel, 13 Strip casting Sheet metal forming Comparison of recrystallization behaviour of cold Multivariate modelling of variability in sheet metal deformed acicular ferrite produced by conventional forming, 1 processing and direct strip casting, 518 570 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 203 (2008) 563-571 Subcooling boiling heat transfer Tool Numerical investigation on multiphase coupling heat Tool and lubrication for negative incremental forming conduction with subcooling boiling boundary of a commercially pure titanium sheet, 193 conditions and effect of shape during quenching Tool design process, 86 Characterization of the influences of FSW tool Superconductor geometry on welding forces and weld tensile Influence of process parameters on shape quality and strength using an instrumented tool, 46 area fraction in round-to-hexagonal composite wire Tool life drawing, 137 Optimization of machining conditions for effective Superfinishing turning of E0300 alloy steel, 147 Experimental analysis on evolution of superfinished Tool torque surface texture, 365 Characterization of the influences of FSW tool Surface geometry on welding forces and weld tensile Studies on compositionally graded silicon carbide strength using an instrumented tool, 46 dispersed composite surface on mild steel Tool wear developed by laser surface cladding, 505 Investigation of tool wear and cutting force in cryogenic Surface quality machining using design of experiments, 95 Workpiece surface quality when ultra-precision Transformation induced plasticity (TRIP) turning of SiC,/Al composites, 166 Effect of rolling strain on transformation induced Tool and lubrication for negative incremental forming plasticity of austenite to martensite in a high-alloy of a commercially pure titanium sheet, 193 austenitic steel, 349 Surface roughness TRIP steel Evaluation of thrust force and surface roughness in Statistical analysis of finite element modeling in sheet drilling composite material using Taguchi analysis metal forming and springback analysis, 129 and neural network, 342 TRIP-aided steel Preparation of fatigue specimens with controlled Effect of cold rolling reduction and intercritical surface characteristics, 396 annealing temperature on the bulk texture of two Surface texture TRIP-aided steel sheets, 293 Experimental analysis on evolution of superfinished Tube bending surface texture, 365 Bending of tube and section made of strain-hardening materials, 372 Taguchi method Tube bulge test Optimization of machining conditions for effective The determination of flow stress of tubular material turning of E0300 alloy steel, 147 for hydroforming applications, 381 Evaluation of thrust force and surface roughness in Tube hydroforming drilling composite material using Taguchi analysis The determination of flow stress of tubular material and neural network, 342 for hydroforming applications, 381 Process optimization in laser surface structuring of Tube-sheet structure alumina4,9 8 Scanning electron beam brazing of thin-wall capillary Taguchi methods tube-sheet structure, 301 Development of a flexible high-speed EDM technology Turning with geometrical transform optimization, 355 Investigation of tool wear and cutting force in Texture cryogenic machining using design of experiments, Effect of cold rolling reduction and intercritical 95 annealing temperature on the bulk texture of two TRIP-aided steel sheets, 293 Ultra-fine grained microstructure Thermal radiation Large UFG Al alloy plates from cryomilling, 37 Similarity solutions for flow and heat transfer of a Ultra-precision quiescent fluid over a nonlinearly stretching Workpiece surface quality when ultra-precision surface, 176 turning of SiC,/Al composites, 166 Thick films Ultrashort laser ablation Electrophoretic deposition of Bay 77Cay ,, TIO, Study of ultrashort laser ablation of metals by nanopowders, 526 molecular dynamics simulation and experimental Thrust force method, 202 Evaluation of thrust force and surface roughness in Ultra-thin wall drilling composite material using Taguchi analysis Precision control of explosive forming for metallic and neural network, 342 decorating sphere, 449 Ti-6Al-4V Corrosion behaviour of laser gas-nitrided Ti-6Al-4V Variation alloy in nitric acid solution, 315 Multivariate modelling of variability in sheet metal Tinplate processing forming, 1 Predicting of the Liiders’ bands in the processing of TH Viscosity prediction material in computer environment by means of Apparent viscosity prediction of alumina-paraffin stochastic modeling, 154 suspensions using artificial neural networks, 208 Titania Viscous dissipation Synthesis and photocatalytic characterization of Similarity solutions for flow and heat transfer of a titania-supported bamboo charcoals by using quiescent fluid over a nonlinearly stretching sol-gel method, 326 surface, 176

See more

The list of books you might like

Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
DMCA & Copyright: Dear all, most of the website is community built, users are uploading hundred of books everyday, which makes really hard for us to identify copyrighted material, please contact us if you want any material removed.
Copyright @ PDFdrive.to, 2022 | We love our users