Table Of Content

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 791-793 available at www.sciencedirect.com "35° ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Author Index of Volume 201 Abou-El-Hossein, K.A., 483 Cho, S.-Y., 60 Hashmi, M.S., 369 Abudollah, A., 43 Choi, B.H., 526 Hashmi, M.S.J., 645 Aghili, A., 133 Choi, B.K., 526 Hertel, K., 242 Amin, A.K.M.N., 466 Choi, J.-H., 261 Higashi, K., 395 Amini, S., 43 Choi, J.H., 742 Hino, R., 395 Amirsadeghi, A., 673 Choi, K.-K., 580 Hirota, K., 209 An, C.-C., 706 Choi, S., 91, 112, 348 Ho, H.-L., 14 Awais, M., 73 Choi, Y.-M., 497 Hocheng, H., 471, 560 Azushima, A., 390 Chong, M.K., 746 Hodgson, P.D., 303, 629 Chou, C.C., 542 Hong, J.K., 419, 515 Bae, J.W., 336 Chu, K.Y., 770 Hong, S.-K., 491 Bae, W.B., 742 Chuang, C.T., 770 Hoque, A.S.M., 204 BariSi¢, B., 786 Chuang, W.-C., 150 Horita, Z., 32 Barreiros, F.M., 651 Hort, N., 359 Batalha, G.F., S07 Diez, E., 486 Hsiang, S.H., 138 Bergheau, J.M., 450, 590 Dobrzaniski, L.A., 291, 310 Hsiang, S.-H., 14 Bielariska, E., 291 Dolah, S.B., 466 Hsu, L.-S., 606 Bonnet, C., 450 Donati, L., 156 Hsu, R.Q., 252 Brahmankar, P.K., 380 Drygaia, A., 291 Hsu, T.H., 683 Brosse, A., 590 Hsu, Y.-C., 128 Burhanuddin, Y., 570 Ekreem, N.B., 780 Hu, H., 364 Byon, S.M., 73, 106 Endo, R., 401 Hu, L., 736 Engel, U., 2 Huang, J.-C., 477 Castanho, J.M., 651 Eom, I.S., 515 Huang, L., 267 Cha, K.-U., 491 Huang, S.-J., 297 Chan, L.C., 413 Fang, G., 226 Huang, Y.-M., 256, 385 Chang, C.-)., 14 Fujiwara, W., 720 Huang, Y.X., 689 Chang, C.K., 565 Fukauara, K., 319 Hung, C., 751 Chang, H.Y., 560 Fukuzawa, Y., 401 Hung, J.-C., 751 Chang, J.H., 560 Furushima, T., 123 Huynh, N.N., 79 Chang, J.K., 689 Furuya, T., 536 Hwang, M.Y., 112 Chang, J.R., 252 Hwang, Y.M., 174 Chang, Q., 736 Gao, L., 413 Chang, R.C., 770 Gao, W.M., 629 Im, Y.T., 1, 19, 73, 91, 348 Chao, C.K., 770 Ghani, J.A., 570 Imai, K., 193 Che Haron, C.H., 570 Ghazali, M.J., 662 Itadani, M., 720 Chen, C.-C.A., 606 Gilles, P., 450 Chen, C.-H., 618 Gotombek, K., 291, 310 Jan, F.-S., 145 Chen, F.-K., 150, 247 Goodarzi, M., 189 Jane Wang, Q., 85 Chen, G.Z., 689 Gu, G., 97 Jang, Y.C., 419 Chen, H.-Y., 297 Guao, Y.-Y., 601 Jeong, H.G., 179 Chen, J.-Y., 618 Gujar, T.P., 775 Jeong, S.H., 118 Chen, R.-H., 706 Gweon, D.-G., 497 Jeong, S.-T., 761 Chen, Y.-S., 37 Ji, Y.H., 354 Cheng, C.H., 554, 683 Ha, S.K., 425 Jiang, Z.Y., 85 Cheng, Y.-L., 640 Ha, Y.S., 168 Jin, Y., 189, 193 Chiu, N.-H., 601 Habeeb, H.H., 483 Jo, H., 53 Cho, C., 678 Haghi, A.K., 669 Jo, H.H., 53 Cho, C.D., 179 Hamidi, H., 450, 590 Jogi, B.F., 380 Cho, G.-J., 761 Han, J.Y., 742 Joko, K., 390 Cho, J.R., 168, 742 Harada,Y. , 319 Joo, J.-W., 261 Elsevier B.V. doi:10.1016/S0924-0136(08)00270-7 792 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 791-793 Joo, O.-S., 775 Lajis, M.A., 466 Matos, M., 651 Jung, H.Y., 742 Lang, L., 97 Mazlan, S.A., 780 Jung, K.-D., 775 Lee, B.-Y., 618 Mikuia, J., 310 Lee, D.G., 716, 755 Mirzai, M.A., 214 Kadirgama, K., 483 Lee, D.L., 19, 91, 348 Mohammad, B., 483 Kainer, K.U., 359 Lee, G.A., 112 Mohammadi, K., 669 Kang, B.S., 746 Lee, H.C., 19, 348 Mridha, S., 325 Kang, C.G., 336 Lee, H.-S., 280, 678 Murata, M., 189 Kang, C.Y., 515 Lee, H.S., 68 Mustafa, A.H., 369 Kang, I.S., 585 Lee, H.W., 73, 112 Kang, K.W., 425 Lee, I.S., 273 Na, K.H., 112 Kang, M.C., 331, 585 Lee, J., 710 Na, K.-H., 163 Kang, M.J., 502 Lee, J.-B., 60 Nagasawa, S., 401 Kang, S.H., 431, 436 Lee, J.D., 91 Nahavandi, S., 629 Katayama, I., 401 Lee, J.H., 431, 436 Naisson, P., 590 Kavamura, H.A., 507 Lee, J.M., 53 Naka, T., 395 Keh, C.-C., 128 Lee, K.H., 331 Nam, W.-J., 580 Kelleher, M.C., 645 Lee, K.S., 445 Nanda, V.S., 380 Kermansaravi, F., 725 Lee, K.U., 454 Nategh, M.J., 43 Khan, A.A., 325 Lee, K.Y., 585 Nomura, M., 531, 536 Kim, B.G., 716 Lee, M.G., 497 Nozu, S., 720 Kim, B.M., 53, 273 Lee, S., 441 Kim, C., 521 Lee, S.-C., 761 Oh, S.-1., 163 Kim, C.W., 425 Lee, S.H., 53, 118, 542 Oh, Y.K., 64 Kim, D.W., 419 Lee, S.M., 336 Ohnishi, K., 720 Kim, E.-Z., 163 Lee, S.Y., 348 Okuyama, C., 548 Kim, E.Z., 179 Lee, W.-C., 145 Olabi, A.G., 780 Kim, G.H., 118 Lee, Y., 106, 348, 419 Omar, M.Z., 662 Kim, H.J., 101 Lee, Y.-S., 163 Osako, A., 315 Kim, H.S., 19, 32, 425 Lee, Y.S., 431, 436 Kim, L.S., 635 Lee, Y.-S., 491, 580 Pakuta, D., 310 Kim, J., 521, 746 Lei, L.P., 226 Palumbo, G., 183 Kim, J.H., 168 Li, C.-L., 237, 256, 385 Pan, W., 220 Kim, J.-H., 491 Li, D., 736 Pan, Y.-R., 695 Kim, J.S., 331, 585 Li, L., 746 Pancielejko, M., 310 Kim, J.W., 755 Li, N., 364 Panek, P., 291 Kim, J.-Y., 261 Li, T., 97 Papastathis, T.N., 198 Kim, K., 497 Li, Y., 408 Park, H.D., 73 Kim, M.B., 515 Liang, D.L., 252 Park, J.H., 331, 419, 425, 515 Kim, N., 710 Liao, C.-C., 247 Park, J.-H., 491 Kim, S.I., 106 Liao, Y.S., 460 Park, J.J., 354 Kim, S.j., 761 Lim, H., 521 Park, J.-N., 761 Kim, S.K., 445 Lim, S.J., 179 Park, J.W., 746 Kim, S.M., 746 Lin, C.J., 689 Park, N.K., 515 Kim, S.W., 431 Lin, C.-S., 612, 657 Pavlina, E.J., 242 Kim, S.-Y., 25 Lin, H.M., 460 Peng, Y., 736 Kim, T.H., 118, 168 Lin, H.-S., 128 Pérez, H., 486 Kim, Y.S., 596 Lin, K.-H., 701 Prasad, R.C., 380 Kiuchi, M., 623 Lin, S.-T., 612, 657, 701 Prasad, Y.V.R.K., 359 Ko, D.C., 273 Lin, W.-S., 374 Praveen, P., 502 Ko, S.L., 454 Lin, Y.-C., 701 Puspitasari, I., 775 Kobayashi, N., 531 Lin, Y.W., 138 Kohamada, S., 319 Lin, Z.-C., 477 Qin, Y., 220 Kohzu, M., 395 Liu, C.-H., 37 Kong, L.X., 629 Liu, Q., 303 Rabizadeh, E., 725 Koyama, J., 193 Liu, X.H., 79 Rainforth, W.M., 662 Ku, T.W., 746 Liu, Y., 267 Rao, K.P., 359 Kuboki, T., 189 Lu, C., 79 Ratchev, S., 198 Kubota, S., 25 Lu, Y.-H., 237 Rech, J., 450 Kuo, K.-L., 48 Rios, J., 486 Kuwabara, T., 232 Mabuchi, T., 214 Ryll, M., 198 Kwak, J.S., 596 Maeda, R., 548 Kwan, C.-T., 145 Mahfouf, M., 101 Sadeghi, M.H., 43 Kwang-Sup, S., 574 Mahmud, M.B., 466 Sadighi, M., 725 Kwon, H.C., 73 Majzoobi, G.H., 133 Samin, R., 731 Kwon, Y.N., 431 Manabe, K., 123 Saniee, F.F., 133 Manabe, K.-i., 214 Saroosh, M.A., 19 Lai, J.-H., 640 Martins, A.G., 651 Sato, T., 531 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 791-793 Sayuti, M., 731 Tieu, A.K., 79, 85 Yamamoto, M., 232 Schikorra, M., 156 Tomesani, L., 156 Yamanaka, M., 25 Seo, H.J., 118 Torng, S., 150 Yanagida, A., 390 Seol, D.Y., 336 Tricarico, L., 183 Yanagimoto, J., 623 Seong, Y.K., 570 Tsai, H.-K., 247 Yang, A.S., 683 She, F.H., 629 Tsai, Y.-C., 751 Yang, C., 303 Shen, C.Y., 174 Tsai, Y.-W., 256, 385 Yang, H., 267 Tsai, Y.Y., 565 Yang, H.D., 64 Tsao, C.C., 471 Yang, I.Y., 445 Shimada, K., 536 Tseng, C.-F., 374 Yang, M., 315, 574 Shin, H.J., 342 Tseng, C.H., 565 Yang, Y.-L., 612 Shin, W.-)., 60 Tsien, Y.C., 413 Yang, Y.Y., 101 Shiou, F.J., 554 Tsuji, H., 720 Yao, C.H., 765 Si, L.Y., 79 Tsukiyama, Y., 209 Yarlagadda, P.K.D.V., 502 Sladié, S., 786 Yasuumi, T., 209 Sohi, M.H., 673 Uchino, S., 401 Ye, L., 303 Sokovi¢, M., 786 Uemori, T., 395 Yeh, F.-H., 237 Soleimanimehr, H., 43 Yi, Y.-M., 280 Valiorgue, F., 450 Son, I.H., 19, 91 Yi, Y.M., 68 Van Tyne, C.J., 242 Song, S.H., 746 Yilbas, B.S., 285, 369 Vieira, M.T., 651 Song, W,J., 746 Yoo, Y.T., 342 Vizan, A., 486 Song, Y.S., 331 Yoon, D.J., 112, 179 Volkl, R., 2 Sorgente, D., 183 Yoon, J.-H., 280 Sugiyama, S., 623 Yoon, J.H., 68 Wagner, K., 2 Sulaiman, S., 731 Wang, A.-C., 37 Yoon, S.C., 32 Sun, C.Y., 226 Wang, C.-M., 37 Yoshida, F., 395 Sun, Z., 364 Youn, S.-W., 548 Wang, J.H., 460 Sunar, M., 369 Wang, Z., 408 Yu, C.H., 9 Sung, B.S., 635 Won, T., 60 Sung, C.K., 765 Wu, C.-H., 695 Zeng, P., 226 Suresh Kumar Reddy, N., 574 Zhan, M., 267 Wu, C.L., 765 Swee, C.Y., 570 Wu, Y., 531, 536 Zhang, S., 736 Szecsi, T., 204 Zheng, P.F., 413 Xiong, S.W., 85 Zhou, M., 364 Takahashi, K., 189 Xu, Y., 413 Zhou, X., 97 Takahashi, M., 548 Zieba, P., 291 Tekkaya, A.E., 156 Yamamoto, K., 536 Zukowska, L.W., 310 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 available at www.sciencedirect.com —-28 journal homepage: www.elsevier.com/locate/jmatprotec Subject Index of Volume 201 AA6060 alloy Alumina Microstructure analysis of aluminum extrusion: Effects of granule size and distribution on the cold Prediction of microstructure on AA6060 alloy, isostatic pressed alumina, 657 156 A study on characterization of pack-cemented ABAQUS aluminide coating on metals, 669 Effects of laminate sequencing on thermoforming of Aluminium alloys thermoplastic matrix composites, 725 A comparative study of mechanically mixed layers Acidithiobacillus ferrooxidans (MMLs) characteristics of commercial aluminium Metal removal rate of Thiobacillus thiooxidans without alloys sliding against alumina and steel sliders, pre-secreted metabolite, 560 662 Acidithiobacillus thiooxidans Aluminum alloy Metal removal rate of Thiobacillus thiooxidans without Formability of 6k21-T4 car panel sheet for pre-secreted metabolite, 560 viscoelastic—plastic flexible-die forming, 408 Acoustic emission Aluminum alloy 6061 Tool condition and machined surface monitoring for Some studies on fatigue crack growth rate of micro-lens array fabrication in mechanical aluminum alloy 6061, 380 machining, 585 Aluminum nitride Acoustic emission (AE) Effects of reduction atmosphere and nano carbon Effects of the laser treatment and thermal oxidation powder addition on the deoxidization of injection behavior of CoNiCrAlY/ZrO,-8 wt%Y,0, thermal molded aluminum nitride parts, 701 barrier coating, 331 Approach and retract sequence Adaptive Planning and analysis of grinding processes for end Prediction of work-hardening coefficient and mills of cemented tungsten carbide, 618 exponential by adaptive inverse finite element Arcan test method for tubular material, 413 Mechanical strength evaluation for Nd-YAG laser and Adaptive neural network controller electric resistance spot weld (ERSW) joint under Ti6Al4V laser alloying process monitoring by using multiaxial loading, 507 adaptive neural network controller, 297 Austempered ductile iron Additive Comparison of the influence of molybdenum and Rheological behavior and tribological performance of a chromium TIG_ surface alloying on _ the nanodiamond-dispersed lubricant, 542 microstructure, hardness and wear resistance of AE signal ADI, 673 State classification of CBN grinding with support Autofrettage vector machine, 601 Machining effect of the autofrettaged compound Aggregation cylinder under varying overstrain levels, 491 Rheological behavior and tribological performance of a Axisymmetric drawing nanodiamond-dispersed lubricant, 542 Inhomogeneous deformation and residual stress in Air-blow skin-pass axisymmetric drawing, 128 Prediction of slug carry-up by the punch in blanking by AZ31 air-blow of the slug, 252 Forming limit of AZ31 alloy sheet and strain rate on AV/SiC particulate metal-matrix composites warm sheet metal forming, 431 Experimental study of surface integrity during end milling of AI/SiC particulate metal-matrix Backward can extrusion composites, 574 Backward can extrusion of ultra-fine-grained bulk Alloys 242 Al-Mg alloy fabricated by cryomilling and Effect of tool holder geometry and cutting condition hydrostatic extrusion, 163 when milling nickel-based alloy 242, 483 Balanced flow Al-Mg system alloy (AC7A) Finite element analysis of multi-hole extrusion of A study on cooling characteristics of tire mold during a aluminum-alloy tubes, 150 manufacturing process of Al-Mg system alloy Ball burnishing casting mold, 64 Ultra-precision surface finish of NAK80 mould tool Elsevier B.V. doi:10.1016/S0924-0136(08)00271-9 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 steel using sequential ball burnishing and ball CBN grinding polishing processes, 554 State classification of CBN grinding with support Ball polishing vector machine, 601 Ultra-precision surface finish of NAK80 mould tool n-Cell steel using sequential ball burnishing and ball Numerical 3-D FEM simulation of tensor model for polishing processes, 554 liquid crystal displays, 60 Bar drawing Chamfer An investigation into the effect of redundant shear A study of improving warped characteristics during deformation in bar drawing, 133 flange forging, 14 Bending Charpy impact test Effect of hardening exponent on tube bending, 189 Effects of notch position of the Charpy impact Creasing characteristic of aluminum foil coated specimen on the failure behavior in heat affected paperboard, 401 zone, 419 Bending stiffness Chatter Finite element modeling and simulation for bending Effects of workpiece preheating on surface roughness, analysis of multi-layer printed circuit boards using chatter and tool performance during end milling of woven fiber composite, 746 hardened steel D2, 466 Bidirectional extrusion Chemical bath deposition Forming characteristics of AZ31B magnesium alloy in Simple chemical method for nanoporous network of bidirectional extrusion process, 179 In,S, platelets for buffer layer in CIS solar cells, 775 Blanking Chemolithotrophic Precision blanking of thin sheet metals with the help Metal removal rate of Thiobacillus thiooxidans without of chemical etching, 209 pre-secreted metabolite, 560 Prediction of slug carry-up by the punch in blanking by Chromium air-blow of the slug, 252 Comparison of the influence of molybdenum and Blowing agent chromium TIG_ surface alloying on _ the Development of microwave foaming method for microstructure, hardness and wear resistance of phenolic insulation foams, 716 ADI, 673 Bolt forming CO, laser welding Two-dimensional finite element approximation of the Microstructures and mechanical properties of Inconel hexagonal bolt forming process, 19 718 welds by CO, laser welding, 515 Bolt forming process Coated powders Tool life prediction for the bolt forming process based Surface modification of stainless steel powders for on high-cycle fatigue and wear, 348 microfabrication, 651 Buckling pressure Coating Buckling analysis and test of composite shells under A study on characterization of pack-cemented hydrostatic pressure, 742 aluminide coating on metals, 669 Bulge test Cold cross-wedge rolling Hydraulic bulge testing of dual phase steel tubes Optimization of design parameters using a response produced using a novel processing route, 242 surface method in a cold cross-wedge rolling, 112 Burr Cold equal channel angular extrusion Development of deburring tool for burrs at intersecting Formability of steels subjected to cold ECAE process, holes, 454 390 Cold forging Calibration Tool life enhancement in cold forging by locally Numerical and experimental confirmation of the optimized surfaces, 2 calibration stage’s effect in multi-operation sheet Application of CAE in cold forging and heat treatment hydroforming using poor-formability materials, 97 processes for manufacturing of precision helical Car BIW gear part, 25 Mechanical strength evaluation for Nd-YAG laser and Cold isostatic pressing (CIP) electric resistance spot weld (ERSW) joint under Effects of granule size and distribution on the cold multiaxial loading, 507 isostatic pressed alumina, 657 Carbide tools Cold strip rolling Behaviors of end milling Inconel 718 superalloy by Modelling of the effect of friction on cold strip rolling, cemented carbide tools, 460 85 Carbothermal reduction Combined method Effects of reduction atmosphere and nano carbon Development of a combined machining method using powder addition on the deoxidization of injection electrorheological fluids for EDM, 565 molded aluminum nitride parts, 701 Compact tension (CT) specimens Carburization Some studies on fatigue crack growth rate of The processing and fracture analysis on transmission aluminum alloy 6061, 380 shafts of a peanut harvester, 374 Composite materials Case depth A study on mechanical properties of carbon fiber The effects of process variables on the hardness of reinforced plastics by three-point bending testing nitrided 3% chromium steel, 325 and transverse static response, 761 Casting defects Composite shell The molding analysis of automobile parts using the Buckling analysis and test of composite shells under die-casting system, 635 hydrostatic pressure, 742 796 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Compound cylinder Cure process Machining effect of the autofrettaged compound Study of cure process of thick solid rubber, 720 cylinder under varying overstrain levels, 491 Current Compression Copper and graphite electrodes performance in The study of injection/compression liquid composite electrical-discharge machining of XW42 tool steel, molding, 695 570 Compression mode Cutting An investigation oof the behaviour’. of Laser cutting of thick sheet metals: Effects of cutting magnetorheological fluids in compression mode, parameters on kerf size variations, 285 780 Cutting force Compressive speed The influence of different cutting speeds on the An investigation of the behaviour of magnetorheological cutting force and strain-stress behaviors of single fluids in compression mode, 780 crystal copper during nano-scale orthogonal Computation time cutting, 477 Two-dimensional finite element approximation of the Cutting forces hexagonal bolt forming process, 19 Increase of material removal rate in peripheral milling Computational fluid dynamics by varying feed rate, 486 Integrated optimization system for high pressure die casting processes, 629 3-D FE modelling Condenser tube Geometrical effects on residual stresses in 7050-T7451 Process analysis and die design in 12 cells condenser aluminum alloy rods subject to laser shock peening, tube extrusion of Al3003, 53 303 Condition monitoring Deburring tool Tool condition and machined surface monitoring for Development of deburring tool for burrs at intersecting micro-lens array fabrication in mechanical holes, 454 machining, 585 Defects occurrence Contact-free polishing The experimental study on the defects occurrence of Fundamental performance of magnetic compound SL mold in injection molding, 706 fluid polishing liquid in contact-free polishing of DEFORM metal surface, 536 Application of CAE in cold forging and heat treatment Controller processes for manufacturing of precision helical The energy absorption control characteristics of Al gear part, 25 thin-walled tube under quasi-static axial Delamination compression, 445 Effects of peripheral drilling moment on delamination Correlation analysis using special drill bits, 471 Modelling of hot strip rolling process using a hybrid Design-for-manufacture neural network approach, 101 Designing using manufacturing feature library, 204 Corrosion Die angle A study on characterization of pack-cemented An investigation into the effect of redundant shear aluminide coating on metals, 669 deformation in bar drawing, 133 CPU heat sink Die casting Analysis of plastic flow and die design during Tensile behaviour and fracture characteristics of die extrusion of CPU heat sinks, 174 cast magnesium alloy AMSO, 364 Crashworthiness Die corner radius The energy absorption control characteristics of Al A study of improving warped characteristics during thin-walled tube under quasi-static axial flange forging, 14 compression, 445 Die design Creasing rule Process analysis and die design in 12 cells condenser Creasing characteristic of aluminum foil coated tube extrusion of Al3003, 53 paperboard4,0 1 Die failure Critical buckling load The die failure prediction and prevention of the orbital Consideration of buckling characteristics for optimal forging process, 9 design of stiffened punch in the blanking process of Die life lead frarne, 273 Die life prediction considering thermal fluid flow and Cross plies solidification phenomenon in rheology process, 336 A study on mechanical properties of carbon fiber Die stress analysis reinforced plastics by three-point bending testing The die failure prediction and prevention of the orbital and transverse static response, 761 forging process, 9 Cryogenic milling Die-casting process Backward can extrusion of ultra-fine-grained bulk The molding analysis of automobile parts using the Al-Mg alloy fabricated by cryomilling and die-casting system, 635 hydrostatic extrusion, 163 Dieless drawing Crystal plasticity FEM FE analysis of size effect on deformation and heat Simulation of rolling behaviour of cubic oriented al transfer behavior in microtube dieless drawing, single crystal with crystal plasticity FEM, 79 123 Cubic oriented Al single crystal Diffusion bonding Simulation of rolling behaviour of cubic oriented al Fabrication of titanium parts by massive diffusion single crystal with crystal plasticity FEM, 79 bonding, 280 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Direct nanoimprint End milling Effects of thin film properties on metallic pattern Behaviors of end milling Inconel 718 superalloy by formation by direct nanoimprint, 765 cemented carbide tools, 460 Drop transfer mode Experimental study of surface integrity during end Drop transfer mode prediction in pulse GMAW of milling of AI/SiC particulate metal-matrix aluminum using statistical model, 502 composites, 574 Dry sliding Energy A comparative study of mechanically mixed layers An investigation into the effect of redundant shear (MMLs) characteristics of commercial aluminium deformation in bar drawing, 133 alloys sliding against alumina and steel sliders, 662 Energy absorption Dual phase steel Effects of notch position of the Charpy impact Hydraulic bulge testing of dual phase steel tubes specimen on the failure behavior in heat affected produced using a novel processing route, 242 zone, 419 Dual-stage Engineering simulation A novel laser micro/nano-machining system for FPD Study of cure process of thick solid rubber, 720 process, 497 Ensemble modelling Ductile fracture Modelling of hot strip rolling process using a hybrid Optimization of design parameters using a response neural network approach, 101 surface method in a cold cross-wedge rolling, 112 Etching Dynamic FEM Precision blanking of thin sheet metals with the help The coupled thermo-mechanical analysis in the of chemical etching, 209 upsetting process by the dynamic FEM, 37 Eutectic alloy Dynamic recrystallization Superplastic properties of Pb-62%Sn eutectic alloy Hot workability characteristics of cast and after equal channel angular pressing (ECAP), 441 homogenized Mg-3Sn-1Ca alloy, 359 Extracellular secreted metabolites Metal removal rate of Thiobacillus thiooxidans without ECAP pre-secreted metabolite, 560 Superplastic properties of Pb-62%Sn eutectic alloy Extruded fin length after equal channel angular pressing (ECAP), 441 An optimum die fillet design for minimizing the Eccentricity difference in extruded fin lengths of straight-fin Consideration of buckling characteristics for optimal heat sink extrusion, 145 design of stiffened punch in the blanking process of Extrusion lead frame, 273 Application of fuzzy theory to predict deformation Eccentricity index behaviors of magnesium alloy sheets under hot Finite element analysis of multi-hole extrusion of extrusion, 138 aluminum-alloy tubes, 150 Extrusion forming process EDM Finite element analysis of rubber extrusion forming Copper and graphite electrodes performance in process for automobile weather strip, 168 electrical-discharge machining of XW42 tool steel, 570 Failure simulation EDS Effects of notch position of the Charpy impact Effects of heat treatment on the surface of a die steel specimen on the failure behavior in heat affected STD11 machined by W-EDM, 580 zone, 419 Elasto-viscoplastic Fatigue crack growth rate graph Glass material model for the forming stage of the glass Some studies on fatigue crack growth rate of molding process, 751 aluminum alloy 6061, 380 Electric resistance spot weld (ERSW) Fatigue failure Mechanical strength evaluation for Nd-YAG laser and Tool life prediction for the bolt forming process based electric resistance spot weld (ERSW) joint under on high-cycle fatigue and wear, 348 multiaxial loading, 507 Fatigue life Electrical discharge machining (EDM) Effects of microshot peening on surface characteristics Development of a combined machining method using of high-speed tool steel, 319 electrorheological fluids for EDM, 565 FE Electrode wear rate Glass material mode! for the forming stage of the glass Copper and graphite electrodes performance in molding process, 751 electrical-discharge machining of XW42 tool steel, FE analysis 570 Process analysis and die design in 12 cells condenser Electroforming tube extrusion of Al3003, 53 Processing of PZT actuator and nickel plate in a multi- FE analysis of size effect on deformation and heat droplets microejector, 683 transfer behavior in microtube dieless drawing, Electrorheology (ER) 123 Development of a combined machining method using FEM electrorheological fluids for EDM, 565 FE analysis of multi-cycle micro-forming through Elliptical hole-flanging process using closed-die upsetting models and forward Analysis of forming limits in metal forming processes, 385 extrusion models, 220 End mill FEM (finite element method) Planning and analysis of grinding processes for end Buckling analysis and test of composite shells under mills of cemented tungsten carbide, 618 hydrostatic pressure, 742 798 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 FEM simulation Focused ion beam milling Microstructure analysis of aluminum extrusion: A study on fabrication of silicon mold for polymer Prediction of microstructure on AA6060 alloy, 156 hot-embossing using focused ion beam milling, 548 Fiber orientation angle Form rolling Measurement of fiber orientation angle in FRP by Micro form rolling: Imprinting ability of microgrooves intensity method, 755 on metal shafts, 232 Fiber orientation function Formability Measurement of fiber orientation angle in FRP by Die design for stamping a notebook case with intensity method, 755 magnesium alloy sheets, 247 Finite element Formability of 6k21-T4 car panel sheet for Numerical-experimental analysis of thin magnesium viscoelastic-plastic flexible-die forming, 408 alloy stripes subjected to stretch-bending, 183 Formability of steels subjected to cold ECAE process, 390 Finite element analysis Forming error Finite element analysis of plastic deformation behavior FE analysis of multi-cycle micro-forming through during high pressure torsion processing, 32 using closed-die upsetting models and forward Finite element analysis of multi-hole extrusion of extrusion models, 220 aluminum-alloy tubes, 150 Forming limit Analysis of plastic flow and die design during Forming characteristics of AZ31B magnesium alloy in extrusion of CPU heat sinks, 174 bidirectional extrusion process, 179 Tool life prediction for the bolt forming process based Formability of magnesium AZ31 sheet in the on high-cycle fatigue and wear, 348 incremental forming at warm temperature, Finite element method (FEM) 354 A study on cooling characteristics of tire mold during a Forming limit of AZ31 alloy sheet and strain rate on manufacturing process of Al-Mg system alloy warm sheet metal forming, 431 casting mold, 64 Forming limit ratio Modelling of friction phenomena in material removal The analysis of forming limit in re-penetration process processes, 450 of the hole-flanging of sheet metal, 256 The study of injection/compression liquid composite Analysis of forming limits in metal forming processes, molding, 695 385 Finite element modeling and simulation for bending Forming parameters analysis of multi-layer printed circuit boards using Analysis of splitting spinning force by the principal woven fiber composite, 746 stress method, 267 Finite element simulation Fractograph Two-dimensional finite element approximation of the Mechanical properties of the as-cast quartz particulate hexagonal bolt forming process, 19 reinforced LM6 alloy matrix composites, 731 Deformation behavior of the surface defects of low Fractographic analysis carbon steel in wire rod rolling, 91 Some studies on fatigue crack growth rate of Finite-element-analysis aluminum alloy 6061, 380 Tool life enhancement in cold forging by locally Fracture mode optimized surfaces, 2 The processing and fracture analysis on transmission Fixtures shafts of a peanut harvester, 374 Towards an intelligent fixturing system with rapid Friction reconfiguration and part positioning, 198 Modelling of the effect of friction on cold strip rolling, Flank wear 85 Effect of tool holder geometry and cutting condition Modelling of friction phenomena in material removal when milling nickel-based alloy 242, 483 processes, 450 Flaring test Friction coefficient Deformation characteristics of microtubes in flaring A numerical approach to determine flow stress-strain test, 214 curve of strip and friction coefficient in actual cold FLD rolling mill, 106 Forming limit of AZ31 alloy sheet and strain rate on Fuzzy prediction system warm sheet metal forming, 431 Application of fuzzy theory to predict deformation Flow behavior behaviors of magnesium alloy sheets under hot The experimental study on the defects occurrence of extrusion, 138 SL mold in injection molding, 706 Flow guide Gas nitriding Analysis of plastic flow and die design during The effects of process variables on the hardness of extrusion of CPU heat sinks, 174 nitrided 3% chromium steel, 325 Flow pattern Gas turbine The molding analysis of automobile parts using the Investigation into thermal stresses in gas turbine die-casting system, 635 transition-piece: Influence of material properties on Flow stress equation stress levels, 369 Computer simulation of U-channel for under-rail roll Gibbs free energy forming using rigid-plastic finite element methods, 118 Numerical 3-D FEM simulation of tensor model for Flow stress-strain curve liquid crystal displays, 60 A numerical approach to determine flow stress-strain Glass molding process curve of strip and friction coefficient in actual cold Glass material model for the forming stage of the glass rolling mill, 106 molding process, 751 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Glass/metal joining High pressure torsion Application of semisolid joining—Part 4 glass/metal, Finite element analysis of plastic deformation behavior plastic/metal, or wood/metal joining, 623 during high pressure torsion processing, 32 Gradient coatings High speed cutting Structure and mechanical properties of gradient PVD Behaviors of end milling Inconel 718 superalloy by coatings, 310 cemented carbide tools, 460 Grain refinement High-energy ion beam Finite element analysis of plastic deformation behavior Application of ion irradiation for surface finish of during high pressure torsion processing, 32 micro-forming die, 315 Effect of grain refinement of magnesium alloy AZ31 by High-speed tool steel severe plastic deformation on material Effects of microshot peening on surface characteristics characteristics, 436 of high-speed tool steel, 319 Grain size Hole-flanging Microstructure analysis of aluminum extrusion: The analysis of forming limit in re-penetration process Prediction of microstructure on AA6060 alloy, 156 of the hole-flanging of sheet metal, 256 Study of thickness and grain size effects on material Hot bar rolling behavior in micro-forming, 237 Plastic work approach for surface defect prediction in Effects of thin film properties on metallic pattern the hot bar rolling process, 73 formation by direct nanoimprint, 765 Hot extrusion Grinding Process analysis and die design in 12 cells condenser Temperature measurement and heat flux tube extrusion of Al3003, 53 characterization in grinding using thermography, Hot rolling process 590 The processing and fracture analysis on transmission Performances of metal-bond diamond tools in grinding shafts of a peanut harvester, 374 alumina, 612 Hot working Grinding process Hot workability characteristics of cast and Mechanical properties and grinding performance on homogenized Mg-3Sn-1Ca alloy, 359 aluminum-based metal matrix composites, 596 Hot-embossing Planning and analysis of grinding processes for end A study on fabrication of silicon mold for polymer mills of cemented tungsten carbide, 618 hot-embossing using focused ion beam milling, 548 Hardened steel AISI D2 Hot-rolled alloy strip Effects of workpiece preheating on surface roughness, Modelling of hot strip rolling process using a hybrid chatter and tool performance during end milling of neural network approach, 101 hardened steel D2, 466 Hot-work tool steel Hardening exponent Microstructural and hardness investigation of Effect of hardening exponent on tube bending, 189 hot-work tool steels by laser surface treatment, 342 Hardness Hydroforming Microstructural and hardness investigation of hot- Hydraulic bulge testing of dual phase steel tubes work tool steels by laser surface treatment, produced using a novel processing route, 242 342 Hydrostatic extrusion Hardness loop Backward can extrusion of ultra-fine-grained bulk The effects of process variables on the hardness of Al-Mg alloy fabricated by cryomilling and nitrided 3% chromium steel, 325 hydrostatic extrusion, 163 Hardness profile The effects of process variables on the hardness of IFEM nitrided 3% chromium steel, 325 Prediction of work-hardening coefficient and Heat flux exponential by adaptive inverse finite element Temperature measurement and heat flux method for tubular material, 413 characterization in grinding using thermography, Image processing 590 Measurement of fiber orientation angle in FRP by Heat treatment intensity method, 755 Investigation into thermal stresses in gas turbine Image recognition transition-piece: Influence of material properties on Computer-integrated micro-assembling with image- stress levels, 369 servo system for a microdroplet ejector, 689 Effects of heat treatment on the surface of a die steel Impact damage resistance STD11 machined by W-EDM, 580 Impact damage resistance of sandwich structure Heat treatment simulation subjected to low velocity impact, 425 Application of CAE in cold forging and heat treatment Impeller processes for manufacturing of precision helical Effect of grain refinement of magnesium alloy AZ31 by gear part, 25 severe plastic deformation on material Helical gear characteristics, 436 Application of CAE in cold forging and heat treatment IN738 processes for manufacturing of precision helical FEM analysis of ultrasonic-vibration-assisted turning gear part, 25 and the vibratory tool, 43 High pressure die casting (HPDC) Inclined exit surface Integrated optimization system for high pressure die Development of deburring tool for burrs at intersecting casting processes, 629 holes, 454 800 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Inconel 718 Laser processing Behaviors of end milling Inconel 718 superalloy by Laser surface treatment of multicrystalline silicon for cemented carbide tools, 460 enhancing optical properties, 291 Microstructures and mechanical properties of Inconel Laser surface treatment 718 welds by CO, laser welding, 515 Microstructural and hardness investigation of Incremental forming hot-work tool steels by laser surface treatment, 342 Formability of magnesium AZ31 sheet in the Laser treatment incremental forming at warm temperature, 354 Effects of the laser treatment and thermal oxidation Infrared thermography behavior of CoNiCrAlY/ZrO,-8 wt%Y,0, thermal Integrated optimization system for high pressure die barrier coating, 331 casting processes, 629 Laser weld Inhomogeneous deformation Mechanical strength evaluation for Nd-YAG laser and Inhomogeneous deformation and residual stress in electric resistance spot weld (ERSW) joint under skin-pass axisymmetric drawing, 128 multiaxia! loading, 507 Injection molding Layer plates bonding The experimental study on the defects occurrence of A study on robust optimization of layered plates SL mold in injection molding, 706 bonding process based on inverse analysis, 261 Prediction of charging rate in ultrasonic vibration of Lead frame injection molding, 710 Consideration of buckling characteristics for optimal In,S design of stiffened punch in the blanking process of Simple chemical method for nanoporous network of lead frame, 273 In,S, platelets for buffer layer in CIS solar cells, Line detection 775 Computer-integrated micro-assembling with image- Instability servo system for a microdroplet ejector, 689 Deformation characteristics of microtubes in flaring Linear motor test, 214 A novel laser micro/nano-machining system for FPD Insulation process, 497 Development of microwave foaming method for Liquid composite molding phenolic insulation foams, 716 The study of injection/compression liquid composite Intensity method molding, 695 Measurement of fiber orientation angle in FRP by Local induction hardening intensity method, 755 The processing and fracture analysis on transmission Interfacial bonding shafts of a peanut harvester, 374 Mechanical properties of the as-cast quartz particulate Low velocity impact reinforced LM6 alloy matrix composites, 731 Impact damage resistance of sandwich structure Internal stresses subjected to low velocity impact, 425 Effects of internal stresses on the mechanical Low voltage inverter properties of deposition thin films, 770 Cost-effective power converter for thin film solar cell Intersecting hole technology and improved power quality, 786 Development of deburring tool for burrs at intersecting LSP process holes, 454 Geometrical effects on residual stresses in 7050-T7451 Inverse analysis aluminum alloy rods subject to laser shock peening, A study on robust optimization of layered plates 303 bonding process based on inverse analysis, LZ91 magnesium-lithium alloy sheet 261 Die design for stamping a notebook case with Inverse method magnesium alloy sheets, 247 Temperature measurement and _ heat flux characterization in grinding using thermography, Machining 590 FEM analysis of ultrasonic-vibration-assisted turning Inverse scheme and the vibratory tool, 43 A numerical approach to determine flow stress-strain Machining effect of the autofrettaged compound curve of strip and friction coefficient in actual cold cylinder under varying overstrain levels, 491 rolling mill, 106 Macro meso-scopic elastic-plastic behavior Numerical analysis of influence of micro-parameters 316L on macro-micromechanical properties of fiber Modelling of friction phenomena in material removal reinforced metal matrix composites, 736 processes, 450 Magnesium Laser Formability of magnesium AZ31 sheet in the Laser cutting of thick sheet metals: Effects of cutting incremental forming at warm temperature, 354 parameters on kerf size variations, 285 Magnesium alloy Investigation of laser remote welding using disc laser, Hot workability characteristics of cast and 521 homogenized Mg-3Sn-1Ca alloy, 359 Laser alloying process Effect of grain refinement of magnesium alloy AZ31 by Ti6Al4V laser alloying process monitoring by using severe plastic deformation on _ material adaptive neural network controller, 297 characteristics, 436 Laser machining Magnesium alloy AMSO A novel laser micro/nano-machining system for FPD Tensile behaviour and fracture characteristics of die process, 497 cast magnesium alloy AMSO, 364

ebook img

Journal of Materials Processing Technology 2008: Vol 201 Index PDF

2008·4.8 MB·English
by  
#periodicals #sim_microfilm #pub_journal-of-materials-processing-technology
Save to my drive
Quick download
Download
Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Journal of Materials Processing Technology 2008: Vol 201 Index

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 791-793 available at www.sciencedirect.com "35° ScienceDirect journal homepage: www.elsevier.com/locate/jmatprotec Author Index of Volume 201 Abou-El-Hossein, K.A., 483 Cho, S.-Y., 60 Hashmi, M.S., 369 Abudollah, A., 43 Choi, B.H., 526 Hashmi, M.S.J., 645 Aghili, A., 133 Choi, B.K., 526 Hertel, K., 242 Amin, A.K.M.N., 466 Choi, J.-H., 261 Higashi, K., 395 Amini, S., 43 Choi, J.H., 742 Hino, R., 395 Amirsadeghi, A., 673 Choi, K.-K., 580 Hirota, K., 209 An, C.-C., 706 Choi, S., 91, 112, 348 Ho, H.-L., 14 Awais, M., 73 Choi, Y.-M., 497 Hocheng, H., 471, 560 Azushima, A., 390 Chong, M.K., 746 Hodgson, P.D., 303, 629 Chou, C.C., 542 Hong, J.K., 419, 515 Bae, J.W., 336 Chu, K.Y., 770 Hong, S.-K., 491 Bae, W.B., 742 Chuang, C.T., 770 Hoque, A.S.M., 204 BariSi¢, B., 786 Chuang, W.-C., 150 Horita, Z., 32 Barreiros, F.M., 651 Hort, N., 359 Batalha, G.F., S07 Diez, E., 486 Hsiang, S.H., 138 Bergheau, J.M., 450, 590 Dobrzaniski, L.A., 291, 310 Hsiang, S.-H., 14 Bielariska, E., 291 Dolah, S.B., 466 Hsu, L.-S., 606 Bonnet, C., 450 Donati, L., 156 Hsu, R.Q., 252 Brahmankar, P.K., 380 Drygaia, A., 291 Hsu, T.H., 683 Brosse, A., 590 Hsu, Y.-C., 128 Burhanuddin, Y., 570 Ekreem, N.B., 780 Hu, H., 364 Byon, S.M., 73, 106 Endo, R., 401 Hu, L., 736 Engel, U., 2 Huang, J.-C., 477 Castanho, J.M., 651 Eom, I.S., 515 Huang, L., 267 Cha, K.-U., 491 Huang, S.-J., 297 Chan, L.C., 413 Fang, G., 226 Huang, Y.-M., 256, 385 Chang, C.-)., 14 Fujiwara, W., 720 Huang, Y.X., 689 Chang, C.K., 565 Fukauara, K., 319 Hung, C., 751 Chang, H.Y., 560 Fukuzawa, Y., 401 Hung, J.-C., 751 Chang, J.H., 560 Furushima, T., 123 Huynh, N.N., 79 Chang, J.K., 689 Furuya, T., 536 Hwang, M.Y., 112 Chang, J.R., 252 Hwang, Y.M., 174 Chang, Q., 736 Gao, L., 413 Chang, R.C., 770 Gao, W.M., 629 Im, Y.T., 1, 19, 73, 91, 348 Chao, C.K., 770 Ghani, J.A., 570 Imai, K., 193 Che Haron, C.H., 570 Ghazali, M.J., 662 Itadani, M., 720 Chen, C.-C.A., 606 Gilles, P., 450 Chen, C.-H., 618 Gotombek, K., 291, 310 Jan, F.-S., 145 Chen, F.-K., 150, 247 Goodarzi, M., 189 Jane Wang, Q., 85 Chen, G.Z., 689 Gu, G., 97 Jang, Y.C., 419 Chen, H.-Y., 297 Guao, Y.-Y., 601 Jeong, H.G., 179 Chen, J.-Y., 618 Gujar, T.P., 775 Jeong, S.H., 118 Chen, R.-H., 706 Gweon, D.-G., 497 Jeong, S.-T., 761 Chen, Y.-S., 37 Ji, Y.H., 354 Cheng, C.H., 554, 683 Ha, S.K., 425 Jiang, Z.Y., 85 Cheng, Y.-L., 640 Ha, Y.S., 168 Jin, Y., 189, 193 Chiu, N.-H., 601 Habeeb, H.H., 483 Jo, H., 53 Cho, C., 678 Haghi, A.K., 669 Jo, H.H., 53 Cho, C.D., 179 Hamidi, H., 450, 590 Jogi, B.F., 380 Cho, G.-J., 761 Han, J.Y., 742 Joko, K., 390 Cho, J.R., 168, 742 Harada,Y. , 319 Joo, J.-W., 261 Elsevier B.V. doi:10.1016/S0924-0136(08)00270-7 792 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 791-793 Joo, O.-S., 775 Lajis, M.A., 466 Matos, M., 651 Jung, H.Y., 742 Lang, L., 97 Mazlan, S.A., 780 Jung, K.-D., 775 Lee, B.-Y., 618 Mikuia, J., 310 Lee, D.G., 716, 755 Mirzai, M.A., 214 Kadirgama, K., 483 Lee, D.L., 19, 91, 348 Mohammad, B., 483 Kainer, K.U., 359 Lee, G.A., 112 Mohammadi, K., 669 Kang, B.S., 746 Lee, H.C., 19, 348 Mridha, S., 325 Kang, C.G., 336 Lee, H.-S., 280, 678 Murata, M., 189 Kang, C.Y., 515 Lee, H.S., 68 Mustafa, A.H., 369 Kang, I.S., 585 Lee, H.W., 73, 112 Kang, K.W., 425 Lee, I.S., 273 Na, K.H., 112 Kang, M.C., 331, 585 Lee, J., 710 Na, K.-H., 163 Kang, M.J., 502 Lee, J.-B., 60 Nagasawa, S., 401 Kang, S.H., 431, 436 Lee, J.D., 91 Nahavandi, S., 629 Katayama, I., 401 Lee, J.H., 431, 436 Naisson, P., 590 Kavamura, H.A., 507 Lee, J.M., 53 Naka, T., 395 Keh, C.-C., 128 Lee, K.H., 331 Nam, W.-J., 580 Kelleher, M.C., 645 Lee, K.S., 445 Nanda, V.S., 380 Kermansaravi, F., 725 Lee, K.U., 454 Nategh, M.J., 43 Khan, A.A., 325 Lee, K.Y., 585 Nomura, M., 531, 536 Kim, B.G., 716 Lee, M.G., 497 Nozu, S., 720 Kim, B.M., 53, 273 Lee, S., 441 Kim, C., 521 Lee, S.-C., 761 Oh, S.-1., 163 Kim, C.W., 425 Lee, S.H., 53, 118, 542 Oh, Y.K., 64 Kim, D.W., 419 Lee, S.M., 336 Ohnishi, K., 720 Kim, E.-Z., 163 Lee, S.Y., 348 Okuyama, C., 548 Kim, E.Z., 179 Lee, W.-C., 145 Olabi, A.G., 780 Kim, G.H., 118 Lee, Y., 106, 348, 419 Omar, M.Z., 662 Kim, H.J., 101 Lee, Y.-S., 163 Osako, A., 315 Kim, H.S., 19, 32, 425 Lee, Y.S., 431, 436 Kim, L.S., 635 Lee, Y.-S., 491, 580 Pakuta, D., 310 Kim, J., 521, 746 Lei, L.P., 226 Palumbo, G., 183 Kim, J.H., 168 Li, C.-L., 237, 256, 385 Pan, W., 220 Kim, J.-H., 491 Li, D., 736 Pan, Y.-R., 695 Kim, J.S., 331, 585 Li, L., 746 Pancielejko, M., 310 Kim, J.W., 755 Li, N., 364 Panek, P., 291 Kim, J.-Y., 261 Li, T., 97 Papastathis, T.N., 198 Kim, K., 497 Li, Y., 408 Park, H.D., 73 Kim, M.B., 515 Liang, D.L., 252 Park, J.H., 331, 419, 425, 515 Kim, N., 710 Liao, C.-C., 247 Park, J.-H., 491 Kim, S.I., 106 Liao, Y.S., 460 Park, J.J., 354 Kim, S.j., 761 Lim, H., 521 Park, J.-N., 761 Kim, S.K., 445 Lim, S.J., 179 Park, J.W., 746 Kim, S.M., 746 Lin, C.J., 689 Park, N.K., 515 Kim, S.W., 431 Lin, C.-S., 612, 657 Pavlina, E.J., 242 Kim, S.-Y., 25 Lin, H.M., 460 Peng, Y., 736 Kim, T.H., 118, 168 Lin, H.-S., 128 Pérez, H., 486 Kim, Y.S., 596 Lin, K.-H., 701 Prasad, R.C., 380 Kiuchi, M., 623 Lin, S.-T., 612, 657, 701 Prasad, Y.V.R.K., 359 Ko, D.C., 273 Lin, W.-S., 374 Praveen, P., 502 Ko, S.L., 454 Lin, Y.-C., 701 Puspitasari, I., 775 Kobayashi, N., 531 Lin, Y.W., 138 Kohamada, S., 319 Lin, Z.-C., 477 Qin, Y., 220 Kohzu, M., 395 Liu, C.-H., 37 Kong, L.X., 629 Liu, Q., 303 Rabizadeh, E., 725 Koyama, J., 193 Liu, X.H., 79 Rainforth, W.M., 662 Ku, T.W., 746 Liu, Y., 267 Rao, K.P., 359 Kuboki, T., 189 Lu, C., 79 Ratchev, S., 198 Kubota, S., 25 Lu, Y.-H., 237 Rech, J., 450 Kuo, K.-L., 48 Rios, J., 486 Kuwabara, T., 232 Mabuchi, T., 214 Ryll, M., 198 Kwak, J.S., 596 Maeda, R., 548 Kwan, C.-T., 145 Mahfouf, M., 101 Sadeghi, M.H., 43 Kwang-Sup, S., 574 Mahmud, M.B., 466 Sadighi, M., 725 Kwon, H.C., 73 Majzoobi, G.H., 133 Samin, R., 731 Kwon, Y.N., 431 Manabe, K., 123 Saniee, F.F., 133 Manabe, K.-i., 214 Saroosh, M.A., 19 Lai, J.-H., 640 Martins, A.G., 651 Sato, T., 531 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 791-793 Sayuti, M., 731 Tieu, A.K., 79, 85 Yamamoto, M., 232 Schikorra, M., 156 Tomesani, L., 156 Yamanaka, M., 25 Seo, H.J., 118 Torng, S., 150 Yanagida, A., 390 Seol, D.Y., 336 Tricarico, L., 183 Yanagimoto, J., 623 Seong, Y.K., 570 Tsai, H.-K., 247 Yang, A.S., 683 She, F.H., 629 Tsai, Y.-C., 751 Yang, C., 303 Shen, C.Y., 174 Tsai, Y.-W., 256, 385 Yang, H., 267 Tsai, Y.Y., 565 Yang, H.D., 64 Tsao, C.C., 471 Yang, I.Y., 445 Shimada, K., 536 Tseng, C.-F., 374 Yang, M., 315, 574 Shin, H.J., 342 Tseng, C.H., 565 Yang, Y.-L., 612 Shin, W.-)., 60 Tsien, Y.C., 413 Yang, Y.Y., 101 Shiou, F.J., 554 Tsuji, H., 720 Yao, C.H., 765 Si, L.Y., 79 Tsukiyama, Y., 209 Yarlagadda, P.K.D.V., 502 Sladié, S., 786 Yasuumi, T., 209 Sohi, M.H., 673 Uchino, S., 401 Ye, L., 303 Sokovi¢, M., 786 Uemori, T., 395 Yeh, F.-H., 237 Soleimanimehr, H., 43 Yi, Y.-M., 280 Valiorgue, F., 450 Son, I.H., 19, 91 Yi, Y.M., 68 Van Tyne, C.J., 242 Song, S.H., 746 Yilbas, B.S., 285, 369 Vieira, M.T., 651 Song, W,J., 746 Yoo, Y.T., 342 Vizan, A., 486 Song, Y.S., 331 Yoon, D.J., 112, 179 Volkl, R., 2 Sorgente, D., 183 Yoon, J.-H., 280 Sugiyama, S., 623 Yoon, J.H., 68 Wagner, K., 2 Sulaiman, S., 731 Wang, A.-C., 37 Yoon, S.C., 32 Sun, C.Y., 226 Wang, C.-M., 37 Yoshida, F., 395 Sun, Z., 364 Youn, S.-W., 548 Wang, J.H., 460 Sunar, M., 369 Wang, Z., 408 Yu, C.H., 9 Sung, B.S., 635 Won, T., 60 Sung, C.K., 765 Wu, C.-H., 695 Zeng, P., 226 Suresh Kumar Reddy, N., 574 Zhan, M., 267 Wu, C.L., 765 Swee, C.Y., 570 Wu, Y., 531, 536 Zhang, S., 736 Szecsi, T., 204 Zheng, P.F., 413 Xiong, S.W., 85 Zhou, M., 364 Takahashi, K., 189 Xu, Y., 413 Zhou, X., 97 Takahashi, M., 548 Zieba, P., 291 Tekkaya, A.E., 156 Yamamoto, K., 536 Zukowska, L.W., 310 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 available at www.sciencedirect.com —-28 journal homepage: www.elsevier.com/locate/jmatprotec Subject Index of Volume 201 AA6060 alloy Alumina Microstructure analysis of aluminum extrusion: Effects of granule size and distribution on the cold Prediction of microstructure on AA6060 alloy, isostatic pressed alumina, 657 156 A study on characterization of pack-cemented ABAQUS aluminide coating on metals, 669 Effects of laminate sequencing on thermoforming of Aluminium alloys thermoplastic matrix composites, 725 A comparative study of mechanically mixed layers Acidithiobacillus ferrooxidans (MMLs) characteristics of commercial aluminium Metal removal rate of Thiobacillus thiooxidans without alloys sliding against alumina and steel sliders, pre-secreted metabolite, 560 662 Acidithiobacillus thiooxidans Aluminum alloy Metal removal rate of Thiobacillus thiooxidans without Formability of 6k21-T4 car panel sheet for pre-secreted metabolite, 560 viscoelastic—plastic flexible-die forming, 408 Acoustic emission Aluminum alloy 6061 Tool condition and machined surface monitoring for Some studies on fatigue crack growth rate of micro-lens array fabrication in mechanical aluminum alloy 6061, 380 machining, 585 Aluminum nitride Acoustic emission (AE) Effects of reduction atmosphere and nano carbon Effects of the laser treatment and thermal oxidation powder addition on the deoxidization of injection behavior of CoNiCrAlY/ZrO,-8 wt%Y,0, thermal molded aluminum nitride parts, 701 barrier coating, 331 Approach and retract sequence Adaptive Planning and analysis of grinding processes for end Prediction of work-hardening coefficient and mills of cemented tungsten carbide, 618 exponential by adaptive inverse finite element Arcan test method for tubular material, 413 Mechanical strength evaluation for Nd-YAG laser and Adaptive neural network controller electric resistance spot weld (ERSW) joint under Ti6Al4V laser alloying process monitoring by using multiaxial loading, 507 adaptive neural network controller, 297 Austempered ductile iron Additive Comparison of the influence of molybdenum and Rheological behavior and tribological performance of a chromium TIG_ surface alloying on _ the nanodiamond-dispersed lubricant, 542 microstructure, hardness and wear resistance of AE signal ADI, 673 State classification of CBN grinding with support Autofrettage vector machine, 601 Machining effect of the autofrettaged compound Aggregation cylinder under varying overstrain levels, 491 Rheological behavior and tribological performance of a Axisymmetric drawing nanodiamond-dispersed lubricant, 542 Inhomogeneous deformation and residual stress in Air-blow skin-pass axisymmetric drawing, 128 Prediction of slug carry-up by the punch in blanking by AZ31 air-blow of the slug, 252 Forming limit of AZ31 alloy sheet and strain rate on AV/SiC particulate metal-matrix composites warm sheet metal forming, 431 Experimental study of surface integrity during end milling of AI/SiC particulate metal-matrix Backward can extrusion composites, 574 Backward can extrusion of ultra-fine-grained bulk Alloys 242 Al-Mg alloy fabricated by cryomilling and Effect of tool holder geometry and cutting condition hydrostatic extrusion, 163 when milling nickel-based alloy 242, 483 Balanced flow Al-Mg system alloy (AC7A) Finite element analysis of multi-hole extrusion of A study on cooling characteristics of tire mold during a aluminum-alloy tubes, 150 manufacturing process of Al-Mg system alloy Ball burnishing casting mold, 64 Ultra-precision surface finish of NAK80 mould tool Elsevier B.V. doi:10.1016/S0924-0136(08)00271-9 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 steel using sequential ball burnishing and ball CBN grinding polishing processes, 554 State classification of CBN grinding with support Ball polishing vector machine, 601 Ultra-precision surface finish of NAK80 mould tool n-Cell steel using sequential ball burnishing and ball Numerical 3-D FEM simulation of tensor model for polishing processes, 554 liquid crystal displays, 60 Bar drawing Chamfer An investigation into the effect of redundant shear A study of improving warped characteristics during deformation in bar drawing, 133 flange forging, 14 Bending Charpy impact test Effect of hardening exponent on tube bending, 189 Effects of notch position of the Charpy impact Creasing characteristic of aluminum foil coated specimen on the failure behavior in heat affected paperboard, 401 zone, 419 Bending stiffness Chatter Finite element modeling and simulation for bending Effects of workpiece preheating on surface roughness, analysis of multi-layer printed circuit boards using chatter and tool performance during end milling of woven fiber composite, 746 hardened steel D2, 466 Bidirectional extrusion Chemical bath deposition Forming characteristics of AZ31B magnesium alloy in Simple chemical method for nanoporous network of bidirectional extrusion process, 179 In,S, platelets for buffer layer in CIS solar cells, 775 Blanking Chemolithotrophic Precision blanking of thin sheet metals with the help Metal removal rate of Thiobacillus thiooxidans without of chemical etching, 209 pre-secreted metabolite, 560 Prediction of slug carry-up by the punch in blanking by Chromium air-blow of the slug, 252 Comparison of the influence of molybdenum and Blowing agent chromium TIG_ surface alloying on _ the Development of microwave foaming method for microstructure, hardness and wear resistance of phenolic insulation foams, 716 ADI, 673 Bolt forming CO, laser welding Two-dimensional finite element approximation of the Microstructures and mechanical properties of Inconel hexagonal bolt forming process, 19 718 welds by CO, laser welding, 515 Bolt forming process Coated powders Tool life prediction for the bolt forming process based Surface modification of stainless steel powders for on high-cycle fatigue and wear, 348 microfabrication, 651 Buckling pressure Coating Buckling analysis and test of composite shells under A study on characterization of pack-cemented hydrostatic pressure, 742 aluminide coating on metals, 669 Bulge test Cold cross-wedge rolling Hydraulic bulge testing of dual phase steel tubes Optimization of design parameters using a response produced using a novel processing route, 242 surface method in a cold cross-wedge rolling, 112 Burr Cold equal channel angular extrusion Development of deburring tool for burrs at intersecting Formability of steels subjected to cold ECAE process, holes, 454 390 Cold forging Calibration Tool life enhancement in cold forging by locally Numerical and experimental confirmation of the optimized surfaces, 2 calibration stage’s effect in multi-operation sheet Application of CAE in cold forging and heat treatment hydroforming using poor-formability materials, 97 processes for manufacturing of precision helical Car BIW gear part, 25 Mechanical strength evaluation for Nd-YAG laser and Cold isostatic pressing (CIP) electric resistance spot weld (ERSW) joint under Effects of granule size and distribution on the cold multiaxial loading, 507 isostatic pressed alumina, 657 Carbide tools Cold strip rolling Behaviors of end milling Inconel 718 superalloy by Modelling of the effect of friction on cold strip rolling, cemented carbide tools, 460 85 Carbothermal reduction Combined method Effects of reduction atmosphere and nano carbon Development of a combined machining method using powder addition on the deoxidization of injection electrorheological fluids for EDM, 565 molded aluminum nitride parts, 701 Compact tension (CT) specimens Carburization Some studies on fatigue crack growth rate of The processing and fracture analysis on transmission aluminum alloy 6061, 380 shafts of a peanut harvester, 374 Composite materials Case depth A study on mechanical properties of carbon fiber The effects of process variables on the hardness of reinforced plastics by three-point bending testing nitrided 3% chromium steel, 325 and transverse static response, 761 Casting defects Composite shell The molding analysis of automobile parts using the Buckling analysis and test of composite shells under die-casting system, 635 hydrostatic pressure, 742 796 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Compound cylinder Cure process Machining effect of the autofrettaged compound Study of cure process of thick solid rubber, 720 cylinder under varying overstrain levels, 491 Current Compression Copper and graphite electrodes performance in The study of injection/compression liquid composite electrical-discharge machining of XW42 tool steel, molding, 695 570 Compression mode Cutting An investigation oof the behaviour’. of Laser cutting of thick sheet metals: Effects of cutting magnetorheological fluids in compression mode, parameters on kerf size variations, 285 780 Cutting force Compressive speed The influence of different cutting speeds on the An investigation of the behaviour of magnetorheological cutting force and strain-stress behaviors of single fluids in compression mode, 780 crystal copper during nano-scale orthogonal Computation time cutting, 477 Two-dimensional finite element approximation of the Cutting forces hexagonal bolt forming process, 19 Increase of material removal rate in peripheral milling Computational fluid dynamics by varying feed rate, 486 Integrated optimization system for high pressure die casting processes, 629 3-D FE modelling Condenser tube Geometrical effects on residual stresses in 7050-T7451 Process analysis and die design in 12 cells condenser aluminum alloy rods subject to laser shock peening, tube extrusion of Al3003, 53 303 Condition monitoring Deburring tool Tool condition and machined surface monitoring for Development of deburring tool for burrs at intersecting micro-lens array fabrication in mechanical holes, 454 machining, 585 Defects occurrence Contact-free polishing The experimental study on the defects occurrence of Fundamental performance of magnetic compound SL mold in injection molding, 706 fluid polishing liquid in contact-free polishing of DEFORM metal surface, 536 Application of CAE in cold forging and heat treatment Controller processes for manufacturing of precision helical The energy absorption control characteristics of Al gear part, 25 thin-walled tube under quasi-static axial Delamination compression, 445 Effects of peripheral drilling moment on delamination Correlation analysis using special drill bits, 471 Modelling of hot strip rolling process using a hybrid Design-for-manufacture neural network approach, 101 Designing using manufacturing feature library, 204 Corrosion Die angle A study on characterization of pack-cemented An investigation into the effect of redundant shear aluminide coating on metals, 669 deformation in bar drawing, 133 CPU heat sink Die casting Analysis of plastic flow and die design during Tensile behaviour and fracture characteristics of die extrusion of CPU heat sinks, 174 cast magnesium alloy AMSO, 364 Crashworthiness Die corner radius The energy absorption control characteristics of Al A study of improving warped characteristics during thin-walled tube under quasi-static axial flange forging, 14 compression, 445 Die design Creasing rule Process analysis and die design in 12 cells condenser Creasing characteristic of aluminum foil coated tube extrusion of Al3003, 53 paperboard4,0 1 Die failure Critical buckling load The die failure prediction and prevention of the orbital Consideration of buckling characteristics for optimal forging process, 9 design of stiffened punch in the blanking process of Die life lead frarne, 273 Die life prediction considering thermal fluid flow and Cross plies solidification phenomenon in rheology process, 336 A study on mechanical properties of carbon fiber Die stress analysis reinforced plastics by three-point bending testing The die failure prediction and prevention of the orbital and transverse static response, 761 forging process, 9 Cryogenic milling Die-casting process Backward can extrusion of ultra-fine-grained bulk The molding analysis of automobile parts using the Al-Mg alloy fabricated by cryomilling and die-casting system, 635 hydrostatic extrusion, 163 Dieless drawing Crystal plasticity FEM FE analysis of size effect on deformation and heat Simulation of rolling behaviour of cubic oriented al transfer behavior in microtube dieless drawing, single crystal with crystal plasticity FEM, 79 123 Cubic oriented Al single crystal Diffusion bonding Simulation of rolling behaviour of cubic oriented al Fabrication of titanium parts by massive diffusion single crystal with crystal plasticity FEM, 79 bonding, 280 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Direct nanoimprint End milling Effects of thin film properties on metallic pattern Behaviors of end milling Inconel 718 superalloy by formation by direct nanoimprint, 765 cemented carbide tools, 460 Drop transfer mode Experimental study of surface integrity during end Drop transfer mode prediction in pulse GMAW of milling of AI/SiC particulate metal-matrix aluminum using statistical model, 502 composites, 574 Dry sliding Energy A comparative study of mechanically mixed layers An investigation into the effect of redundant shear (MMLs) characteristics of commercial aluminium deformation in bar drawing, 133 alloys sliding against alumina and steel sliders, 662 Energy absorption Dual phase steel Effects of notch position of the Charpy impact Hydraulic bulge testing of dual phase steel tubes specimen on the failure behavior in heat affected produced using a novel processing route, 242 zone, 419 Dual-stage Engineering simulation A novel laser micro/nano-machining system for FPD Study of cure process of thick solid rubber, 720 process, 497 Ensemble modelling Ductile fracture Modelling of hot strip rolling process using a hybrid Optimization of design parameters using a response neural network approach, 101 surface method in a cold cross-wedge rolling, 112 Etching Dynamic FEM Precision blanking of thin sheet metals with the help The coupled thermo-mechanical analysis in the of chemical etching, 209 upsetting process by the dynamic FEM, 37 Eutectic alloy Dynamic recrystallization Superplastic properties of Pb-62%Sn eutectic alloy Hot workability characteristics of cast and after equal channel angular pressing (ECAP), 441 homogenized Mg-3Sn-1Ca alloy, 359 Extracellular secreted metabolites Metal removal rate of Thiobacillus thiooxidans without ECAP pre-secreted metabolite, 560 Superplastic properties of Pb-62%Sn eutectic alloy Extruded fin length after equal channel angular pressing (ECAP), 441 An optimum die fillet design for minimizing the Eccentricity difference in extruded fin lengths of straight-fin Consideration of buckling characteristics for optimal heat sink extrusion, 145 design of stiffened punch in the blanking process of Extrusion lead frame, 273 Application of fuzzy theory to predict deformation Eccentricity index behaviors of magnesium alloy sheets under hot Finite element analysis of multi-hole extrusion of extrusion, 138 aluminum-alloy tubes, 150 Extrusion forming process EDM Finite element analysis of rubber extrusion forming Copper and graphite electrodes performance in process for automobile weather strip, 168 electrical-discharge machining of XW42 tool steel, 570 Failure simulation EDS Effects of notch position of the Charpy impact Effects of heat treatment on the surface of a die steel specimen on the failure behavior in heat affected STD11 machined by W-EDM, 580 zone, 419 Elasto-viscoplastic Fatigue crack growth rate graph Glass material model for the forming stage of the glass Some studies on fatigue crack growth rate of molding process, 751 aluminum alloy 6061, 380 Electric resistance spot weld (ERSW) Fatigue failure Mechanical strength evaluation for Nd-YAG laser and Tool life prediction for the bolt forming process based electric resistance spot weld (ERSW) joint under on high-cycle fatigue and wear, 348 multiaxial loading, 507 Fatigue life Electrical discharge machining (EDM) Effects of microshot peening on surface characteristics Development of a combined machining method using of high-speed tool steel, 319 electrorheological fluids for EDM, 565 FE Electrode wear rate Glass material mode! for the forming stage of the glass Copper and graphite electrodes performance in molding process, 751 electrical-discharge machining of XW42 tool steel, FE analysis 570 Process analysis and die design in 12 cells condenser Electroforming tube extrusion of Al3003, 53 Processing of PZT actuator and nickel plate in a multi- FE analysis of size effect on deformation and heat droplets microejector, 683 transfer behavior in microtube dieless drawing, Electrorheology (ER) 123 Development of a combined machining method using FEM electrorheological fluids for EDM, 565 FE analysis of multi-cycle micro-forming through Elliptical hole-flanging process using closed-die upsetting models and forward Analysis of forming limits in metal forming processes, 385 extrusion models, 220 End mill FEM (finite element method) Planning and analysis of grinding processes for end Buckling analysis and test of composite shells under mills of cemented tungsten carbide, 618 hydrostatic pressure, 742 798 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 FEM simulation Focused ion beam milling Microstructure analysis of aluminum extrusion: A study on fabrication of silicon mold for polymer Prediction of microstructure on AA6060 alloy, 156 hot-embossing using focused ion beam milling, 548 Fiber orientation angle Form rolling Measurement of fiber orientation angle in FRP by Micro form rolling: Imprinting ability of microgrooves intensity method, 755 on metal shafts, 232 Fiber orientation function Formability Measurement of fiber orientation angle in FRP by Die design for stamping a notebook case with intensity method, 755 magnesium alloy sheets, 247 Finite element Formability of 6k21-T4 car panel sheet for Numerical-experimental analysis of thin magnesium viscoelastic-plastic flexible-die forming, 408 alloy stripes subjected to stretch-bending, 183 Formability of steels subjected to cold ECAE process, 390 Finite element analysis Forming error Finite element analysis of plastic deformation behavior FE analysis of multi-cycle micro-forming through during high pressure torsion processing, 32 using closed-die upsetting models and forward Finite element analysis of multi-hole extrusion of extrusion models, 220 aluminum-alloy tubes, 150 Forming limit Analysis of plastic flow and die design during Forming characteristics of AZ31B magnesium alloy in extrusion of CPU heat sinks, 174 bidirectional extrusion process, 179 Tool life prediction for the bolt forming process based Formability of magnesium AZ31 sheet in the on high-cycle fatigue and wear, 348 incremental forming at warm temperature, Finite element method (FEM) 354 A study on cooling characteristics of tire mold during a Forming limit of AZ31 alloy sheet and strain rate on manufacturing process of Al-Mg system alloy warm sheet metal forming, 431 casting mold, 64 Forming limit ratio Modelling of friction phenomena in material removal The analysis of forming limit in re-penetration process processes, 450 of the hole-flanging of sheet metal, 256 The study of injection/compression liquid composite Analysis of forming limits in metal forming processes, molding, 695 385 Finite element modeling and simulation for bending Forming parameters analysis of multi-layer printed circuit boards using Analysis of splitting spinning force by the principal woven fiber composite, 746 stress method, 267 Finite element simulation Fractograph Two-dimensional finite element approximation of the Mechanical properties of the as-cast quartz particulate hexagonal bolt forming process, 19 reinforced LM6 alloy matrix composites, 731 Deformation behavior of the surface defects of low Fractographic analysis carbon steel in wire rod rolling, 91 Some studies on fatigue crack growth rate of Finite-element-analysis aluminum alloy 6061, 380 Tool life enhancement in cold forging by locally Fracture mode optimized surfaces, 2 The processing and fracture analysis on transmission Fixtures shafts of a peanut harvester, 374 Towards an intelligent fixturing system with rapid Friction reconfiguration and part positioning, 198 Modelling of the effect of friction on cold strip rolling, Flank wear 85 Effect of tool holder geometry and cutting condition Modelling of friction phenomena in material removal when milling nickel-based alloy 242, 483 processes, 450 Flaring test Friction coefficient Deformation characteristics of microtubes in flaring A numerical approach to determine flow stress-strain test, 214 curve of strip and friction coefficient in actual cold FLD rolling mill, 106 Forming limit of AZ31 alloy sheet and strain rate on Fuzzy prediction system warm sheet metal forming, 431 Application of fuzzy theory to predict deformation Flow behavior behaviors of magnesium alloy sheets under hot The experimental study on the defects occurrence of extrusion, 138 SL mold in injection molding, 706 Flow guide Gas nitriding Analysis of plastic flow and die design during The effects of process variables on the hardness of extrusion of CPU heat sinks, 174 nitrided 3% chromium steel, 325 Flow pattern Gas turbine The molding analysis of automobile parts using the Investigation into thermal stresses in gas turbine die-casting system, 635 transition-piece: Influence of material properties on Flow stress equation stress levels, 369 Computer simulation of U-channel for under-rail roll Gibbs free energy forming using rigid-plastic finite element methods, 118 Numerical 3-D FEM simulation of tensor model for Flow stress-strain curve liquid crystal displays, 60 A numerical approach to determine flow stress-strain Glass molding process curve of strip and friction coefficient in actual cold Glass material model for the forming stage of the glass rolling mill, 106 molding process, 751 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Glass/metal joining High pressure torsion Application of semisolid joining—Part 4 glass/metal, Finite element analysis of plastic deformation behavior plastic/metal, or wood/metal joining, 623 during high pressure torsion processing, 32 Gradient coatings High speed cutting Structure and mechanical properties of gradient PVD Behaviors of end milling Inconel 718 superalloy by coatings, 310 cemented carbide tools, 460 Grain refinement High-energy ion beam Finite element analysis of plastic deformation behavior Application of ion irradiation for surface finish of during high pressure torsion processing, 32 micro-forming die, 315 Effect of grain refinement of magnesium alloy AZ31 by High-speed tool steel severe plastic deformation on material Effects of microshot peening on surface characteristics characteristics, 436 of high-speed tool steel, 319 Grain size Hole-flanging Microstructure analysis of aluminum extrusion: The analysis of forming limit in re-penetration process Prediction of microstructure on AA6060 alloy, 156 of the hole-flanging of sheet metal, 256 Study of thickness and grain size effects on material Hot bar rolling behavior in micro-forming, 237 Plastic work approach for surface defect prediction in Effects of thin film properties on metallic pattern the hot bar rolling process, 73 formation by direct nanoimprint, 765 Hot extrusion Grinding Process analysis and die design in 12 cells condenser Temperature measurement and heat flux tube extrusion of Al3003, 53 characterization in grinding using thermography, Hot rolling process 590 The processing and fracture analysis on transmission Performances of metal-bond diamond tools in grinding shafts of a peanut harvester, 374 alumina, 612 Hot working Grinding process Hot workability characteristics of cast and Mechanical properties and grinding performance on homogenized Mg-3Sn-1Ca alloy, 359 aluminum-based metal matrix composites, 596 Hot-embossing Planning and analysis of grinding processes for end A study on fabrication of silicon mold for polymer mills of cemented tungsten carbide, 618 hot-embossing using focused ion beam milling, 548 Hardened steel AISI D2 Hot-rolled alloy strip Effects of workpiece preheating on surface roughness, Modelling of hot strip rolling process using a hybrid chatter and tool performance during end milling of neural network approach, 101 hardened steel D2, 466 Hot-work tool steel Hardening exponent Microstructural and hardness investigation of Effect of hardening exponent on tube bending, 189 hot-work tool steels by laser surface treatment, 342 Hardness Hydroforming Microstructural and hardness investigation of hot- Hydraulic bulge testing of dual phase steel tubes work tool steels by laser surface treatment, produced using a novel processing route, 242 342 Hydrostatic extrusion Hardness loop Backward can extrusion of ultra-fine-grained bulk The effects of process variables on the hardness of Al-Mg alloy fabricated by cryomilling and nitrided 3% chromium steel, 325 hydrostatic extrusion, 163 Hardness profile The effects of process variables on the hardness of IFEM nitrided 3% chromium steel, 325 Prediction of work-hardening coefficient and Heat flux exponential by adaptive inverse finite element Temperature measurement and heat flux method for tubular material, 413 characterization in grinding using thermography, Image processing 590 Measurement of fiber orientation angle in FRP by Heat treatment intensity method, 755 Investigation into thermal stresses in gas turbine Image recognition transition-piece: Influence of material properties on Computer-integrated micro-assembling with image- stress levels, 369 servo system for a microdroplet ejector, 689 Effects of heat treatment on the surface of a die steel Impact damage resistance STD11 machined by W-EDM, 580 Impact damage resistance of sandwich structure Heat treatment simulation subjected to low velocity impact, 425 Application of CAE in cold forging and heat treatment Impeller processes for manufacturing of precision helical Effect of grain refinement of magnesium alloy AZ31 by gear part, 25 severe plastic deformation on material Helical gear characteristics, 436 Application of CAE in cold forging and heat treatment IN738 processes for manufacturing of precision helical FEM analysis of ultrasonic-vibration-assisted turning gear part, 25 and the vibratory tool, 43 High pressure die casting (HPDC) Inclined exit surface Integrated optimization system for high pressure die Development of deburring tool for burrs at intersecting casting processes, 629 holes, 454 800 JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 201 (2008) 794-807 Inconel 718 Laser processing Behaviors of end milling Inconel 718 superalloy by Laser surface treatment of multicrystalline silicon for cemented carbide tools, 460 enhancing optical properties, 291 Microstructures and mechanical properties of Inconel Laser surface treatment 718 welds by CO, laser welding, 515 Microstructural and hardness investigation of Incremental forming hot-work tool steels by laser surface treatment, 342 Formability of magnesium AZ31 sheet in the Laser treatment incremental forming at warm temperature, 354 Effects of the laser treatment and thermal oxidation Infrared thermography behavior of CoNiCrAlY/ZrO,-8 wt%Y,0, thermal Integrated optimization system for high pressure die barrier coating, 331 casting processes, 629 Laser weld Inhomogeneous deformation Mechanical strength evaluation for Nd-YAG laser and Inhomogeneous deformation and residual stress in electric resistance spot weld (ERSW) joint under skin-pass axisymmetric drawing, 128 multiaxia! loading, 507 Injection molding Layer plates bonding The experimental study on the defects occurrence of A study on robust optimization of layered plates SL mold in injection molding, 706 bonding process based on inverse analysis, 261 Prediction of charging rate in ultrasonic vibration of Lead frame injection molding, 710 Consideration of buckling characteristics for optimal In,S design of stiffened punch in the blanking process of Simple chemical method for nanoporous network of lead frame, 273 In,S, platelets for buffer layer in CIS solar cells, Line detection 775 Computer-integrated micro-assembling with image- Instability servo system for a microdroplet ejector, 689 Deformation characteristics of microtubes in flaring Linear motor test, 214 A novel laser micro/nano-machining system for FPD Insulation process, 497 Development of microwave foaming method for Liquid composite molding phenolic insulation foams, 716 The study of injection/compression liquid composite Intensity method molding, 695 Measurement of fiber orientation angle in FRP by Local induction hardening intensity method, 755 The processing and fracture analysis on transmission Interfacial bonding shafts of a peanut harvester, 374 Mechanical properties of the as-cast quartz particulate Low velocity impact reinforced LM6 alloy matrix composites, 731 Impact damage resistance of sandwich structure Internal stresses subjected to low velocity impact, 425 Effects of internal stresses on the mechanical Low voltage inverter properties of deposition thin films, 770 Cost-effective power converter for thin film solar cell Intersecting hole technology and improved power quality, 786 Development of deburring tool for burrs at intersecting LSP process holes, 454 Geometrical effects on residual stresses in 7050-T7451 Inverse analysis aluminum alloy rods subject to laser shock peening, A study on robust optimization of layered plates 303 bonding process based on inverse analysis, LZ91 magnesium-lithium alloy sheet 261 Die design for stamping a notebook case with Inverse method magnesium alloy sheets, 247 Temperature measurement and _ heat flux characterization in grinding using thermography, Machining 590 FEM analysis of ultrasonic-vibration-assisted turning Inverse scheme and the vibratory tool, 43 A numerical approach to determine flow stress-strain Machining effect of the autofrettaged compound curve of strip and friction coefficient in actual cold cylinder under varying overstrain levels, 491 rolling mill, 106 Macro meso-scopic elastic-plastic behavior Numerical analysis of influence of micro-parameters 316L on macro-micromechanical properties of fiber Modelling of friction phenomena in material removal reinforced metal matrix composites, 736 processes, 450 Magnesium Laser Formability of magnesium AZ31 sheet in the Laser cutting of thick sheet metals: Effects of cutting incremental forming at warm temperature, 354 parameters on kerf size variations, 285 Magnesium alloy Investigation of laser remote welding using disc laser, Hot workability characteristics of cast and 521 homogenized Mg-3Sn-1Ca alloy, 359 Laser alloying process Effect of grain refinement of magnesium alloy AZ31 by Ti6Al4V laser alloying process monitoring by using severe plastic deformation on _ material adaptive neural network controller, 297 characteristics, 436 Laser machining Magnesium alloy AMSO A novel laser micro/nano-machining system for FPD Tensile behaviour and fracture characteristics of die process, 497 cast magnesium alloy AMSO, 364

See more

The list of books you might like

Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
DMCA & Copyright: Dear all, most of the website is community built, users are uploading hundred of books everyday, which makes really hard for us to identify copyrighted material, please contact us if you want any material removed.
Copyright @ PDFdrive.to, 2022 | We love our users