Journal of Materials Processing Technology Journal of Materials Processing Technology 167 (2005) 555-556 www.elsevier.com/locate/jmatprotec Author Index of Volume 167 Agnus, J., 371 Fang, F.Z., 119 Krupinski, M., 456 Avelar-Batista, J.C., 415 Fuentes, G.G., 415 Kuzman, K., 237 Kwon, H.-C., 273 Baker, M., 1 Ganesh, P., 83 Balendra, R., 144, 294 Gantar, G., 237 Lan, H.-Y., 167 Bana, V., 408 Gantner, P., 302 Lang, L., 191 Bariani, P.F., 529 Gedicke, J., 494 Lee, L.C., 119 Bauer, H., 302, 363 Geiger, M., 177 Lee, S.-W., 33 Bayer, A., 494 Gery, D., 393 Lee, T.C., 447, 472 Becker, A.A., 480 Ghosh, S., 91 Lee, W.B., 139, 151, 536, 549 Begum, S., 542 Gillner, A., 494 Li, M., 91 Behrens, B.-A., 309 Gras, Ch., 62 Lin, J., 344, 354 Bissacco, G., 201 Guan, Y., 124 Lin, V.-H., 208 Blount, G.N., 41 Guodong, W., 132 Lin, Z.-C., 208 Bobié¢, I., 14 Guoqun, Z., 124 Liu, G., 230 Bosse, L., 494 Guzman-Diana, R., 499 Liu, X.D., 119 Breguet, J.-M., 371 Long, H., 393 Lopez-Tarazon, R., 499 Bruschi, S., 529 Hansen, H.N., 201 Harrison, D., 363 Luan, Y., 124 Cairu, G., 132 Harrison, D.K., 302, 338 Luo, X., 515 Carreras, L.J., 415 Hartl, Ch., 383 Mezyk, A., 463 Casalino, G., 422 Hartmann, C., 494 Ma, Y., 294 Chan, L.C., 472 Hashmi, M.S.J., 22, 542 Maksimovi¢, V., 14 Chao, C.G., 103 He, Z.B., 230 Maropoulos, P., 393 Chen, C.M., 103 Ho, C.Y., 265 Chen, D.Z., 429 Hocheng, H., 251 Mazerolle, S., 371 McGeough, J.A., 338 Chen, X., 218 Holtkamp, J., 494 Mediliyegedara, T.K.K.R., 338 Chen, Y.P., 549 Housden, J., 415 Memola Capece Minutolo, F., 422 Cheng, K., 515 Huang, Y.-M., 167 Meredith, M., 62 Cheung, C.F., 549 Hunt, J.D., 62 Merklein, M., 177 Chronakis, I.S., 283 Hufnatter, W., 177 Michler, J., 371 Cristébal, A.B., 415 Hyde, T.H., 480 Mikula, J., 438 Critchley, K.L., 41 Mon, T.T., 184 Curcio, F., 422 Ibrahim, A.A., 47 Montala, F., 415 Im, Y.-T., 273 Mujber, T.S., 22 Damborenea, J.J., 415 Izman, S., 184 Murugan, S., 184 Danckert, J., 191 De Chiffre, L., 201 Jackson, M.J., 316 Nandedkar, R.V., 83 De Silva, A.K.M., 302, 363 Janaki Ram, G.D., 73 Nath, A.K., 83 Dean, T.A., 344, 354 Jinxia, L., 132 Nielsen, K.B., 191 Diméi¢, B., 14 Jovanovi¢, M.T., 14 Dobrzaniski, L.A., 438, 456 Jureczko, M., 463 Doll, U., 488 Olowinsky, A., 494 Du, F., 218 Kaldos, A., 408 Kashani, R., 54 Pawlak, M., 463 El-Axir, M.H., 47 Kaul, R., 83 Peng, X., 244, 508 El-Sinawi, A.H., 54 Keigler, M., 363 Pérez, R., 371 Khadke, A., 91 Pieper, H.-J., 408 Fahlbusch, St., 371 Klages, K., 494 Piltz, S., 402, 488 Fan, J.P., 429 Kong, T.F., 472 Prasad Rao, K., 73 Elsevier B.V. doi: 10.1016/S0924-0136(05)007 16-8 556 Author Index of Volume 167 Qin, Y., 139, 244, 294, 508 Tan, M.J., 161 Webb, D., 515 Tang, C.Y., 429 Williams, J.A., 480 Tate, T.J., 415 Wong, C.C., 344 Reddy, G.M., 73 Teng, B.G., 224, 230 Wu, H.Y., 549 Ricolfe-Viala, C., 499 Thiruvarudchelvan, S., 161 Robinson, G.M., 316 Tiwari, P., 83 Xianghua, L., 132 Rodriguez, R., 415 To, S., 536, 549 Toh, C.K., 110 Yaghi, A.H., 480 Sanchez-Salmeron, A.J., 499 Travis, F.W., 141 Yang, C.C., 103 Sarin Sundar, J.K., 73 Tete, CC. 251 Yanjin, G., 124 Schaefer, F., 309 Tsui, C.P., 429 Yiguo, L., 124 Schauer, K., 402 Yuan, S.J., 224, 230 Sheng, S., 124 Uhlmann, E., 402, 488 Silva, A.K.M.D., 338 Uskokovic, P.S., 429 Zec, S., 14 Sobezyk, M., 408 Zhang, X., 244 Sokolowski, J.H., 456 Venkatesh, V.C., 184 Zhanying, L., 132 Steinecker, A., 371 Venugopal Reddy, A., 73 Zhao, G., 124 Sukaylo, V., 408 Vichare, P.S., 184 Zhaodong, W., 132 Sun, D., 218 Zhou, J., 218, 508 Sun, S., 124 Wang, L., 447 Zhou, X., 191 Sun, W., 480 Wang, Z.R., 224, 230 Zhu, G., 218 Szecsi, T., 22 Wardle, F., 515 Zhu, Y.H., 536 Journal of Materials Processing Technology Journal of Materials Processing Technology 167 (2005) 557-563 www.elsevier.com/locate/jmatprotec Subject Index of Volumes 167 AA3105 Bench-type ultraprecision machines Microdefects formation during the twin-roll casting of AIH-Mg—Mn Design of ultraprecision machine tools with applications to manu- aluminium alloys, 62 facture of miniature and micro components, 515 Active control Bending Improving surface roughness in turning using optimal control of Free-Bending—A new bending technique in the hydroforming tool’s radial position, 54 process chain, 302 Adaptive meshing Biaxial testing Computer simulation of single-point diamond turning using finite Specimen for a novel concept of the biaxial tension test, 177 element method, 549 Bi-directional Al,O, A study on the bi-directional springback of sheet metal stamping, 33 “The structure and functional properties of PVD and CVD coated Blank holding Al,O, + ZrO, oxide tool ceramics, 438 Recent developments in friction-assisted sheet metal forming Alloy 718 | ; processes, 161 Microstructure and tensile properties of Inconel 718 pulsed Blank shapes Nd-YAG laser welds, 73 Numerical determination of blank shapes for warm forming of Aluminium alloy non-axisymmetric components, 472 Microdefects formation during the twin-roll casting of AA-Mg—Mn Bondless diamond wheels aluminium alloys, 62 The novel bondless wheel, spherical glass chips and a new method Investigation into the forming of a complex cup locally constrained of aspheric generation, 184 by a round die based on an innovative hydromechanical deep Burnishing drawing method, 191 Some surface characteristics due to center rest ball burnishing, 47 Enhancing the formability of aluminium components via tempera- Burr ture controlled hydroforming, 363 3D modeling of shear-slitting process for aluminum alloys, 91 Computer aided classification of flaws occurred during casting of Butt joint weld aluminum, 456 Effects of welding speed, energy input and heat source distribution Aluminum on temperature variations in butt joint welding, 393 3D modeling of shear-slitting process for aluminum alloys, 91 Carbon nanofibers ANN Novel nanocomposites and nanoceramics based on polymer Investigation on Ti6Al4V laser welding using statistical and nanofibers using electrospinning process—A review, 283 Taguchi approaches, 422 Carbon nanotubes Annealing Novel nanocomposites and nanoceramics based on polymer Evolution of textures in interstitial free steel during multiple cold nanofibers using electrospinning process—A review, 283 rolling and annealing, 132 Nanomanipulation in a scanning electron microscope, 371 Aspheric generation Cast defects The novel bondless wheel, spherical glass chips and a new method Computer aided classification of flaws occurred during casting of of aspheric generation, 184 aluminum, 456 Automation Casting defect Recent development in micro-handling systems for micro- Microdefects formation during the twin-roll casting of AAMg—Mn manufacturing, 499 aluminium alloys, 62 Axial elongation Center rest Process analysis software for the prediction of elongation with Some surface characteristics due to center rest ball burnishing, 47 respect to the draw bending of small diameter thin walled Chip formation tubing, 41 Finite element investigation of the flow stress dependence of chip © formation, | Back-up Computer simulation of single-point diamond turning using finite The path towards delamination-free drilling of composite element method, 549 materials, 251 Chip surface temperature Bar rolling Comparison of chip surface temperature between up and down Process design for refinement and homogenization of micro- milling orientations in high speed rough milling of hardened structure in bar rolling, 273 steel, 110 Elsevier B.V. doi: 10.1016/S0924-0136(05)00717-X 558 Subject Index of Volume 167 CO, laser Diode laser Investigation on Ti6Al4V laser welding using statistical and Investigation on Ti6Al4V laser welding using statistical and Taguchi approaches, 422 Taguchi approaches, 422 Cold rolling reduction Double cold rolling Evolution of textures in interstitial free steel during multiple cold Evolution of textures in interstitial free steel during multiple cold rolling and annealing, 132 rolling and annealing, 132 Collar drawing Drilling Recent developments in friction-assisted sheet metal forming The path towards delamination-free drilling of composite processes, 161 materials, 251 Composite materials Dry cut Optimisation of wind turbine blades, 463 Mean flank temperature measurement in high speed dry cutting of Computer-aided engineering magnesium alloy, 119 Dynamic reverse compensation to increase the accuracy of the Dynamic simulation rapid prototyping system, 167 Dynamic thickness simulation of five-stand continuous cold Conrods rolling, 218 Modelling the forging and post-forging cooling of C70S6 conrods, 529 ECDM Constitutive model New developments in the process control of the hybrid electro A constitutive model for the metals subjected to thermomechani- chemical discharge machining (ECDM) process, 338 cal loading with fast heating during heating-assisted forming, Electron beam 244 Fusion zone during focused electron-beam welding, 265 Continuous casting Electrospinning process Microdefects formation during the twin-roll casting of AA-Mg—Mn Novel nanocomposites and nanoceramics based on polymer aluminium alloys, 62 nanofibers using electrospinning process—A review, 283 Improvement of the temperature distribution in continuous casting En 8 steel moulds through the rearrangement of the cooling water slots, Characterization of dry sliding wear resistance of laser surface 508 hardened En 8 steel, 83 Continuous cold rolling Dynamic thickness simulation of five-stand continuous cold rolling, 218 FE-analysis Cooling Enhancing the formability of aluminium components via tempera- Modelling the forging and post-forging cooling of C70S6 conrods, ture controlled hydroforming, 363 529 FEM simulations Coupled thermal—mechanical FE analysis 3D modeling of shear-slitting process for aluminum alloys, 91 Improvement of the temperature distribution in continuous casting Influence of material properties on the laser-forming process of moulds through the rearrangement of the cooling water slots, sheet metals, 124 508 Prediction of wear in hot forging tools by means of finite-element- Cr—N coatings analysis, 309 Recent advances in the chromium nitride PVD process for forming FEM and machining surface protection, 415 A study on the bi-directional springback of sheet metal stamping, Crystal plasticity 33 A personal reflection of mesoplasticity and its applications, 151 Free-Bending—A new bending technique in the hydroforming Curl distortion process chain, 302 Dynamic reverse compensation to increase the accuracy of the FE-simulation rapid prototyping system, 167 Specimen for a novel concept of the biaxial tension test, 177 CVD Finite element analysis The structure and functional properties of PVD and CVD coated Optimisation of wind turbine blades, 463 Al,O, + ZrO, oxide tool ceramics, 438 Finite element method Dynamic reverse compensation to increase the accuracy of the Damage models rapid prototyping system, 167 3D modeling of shear-slitting process for aluminum alloys, 91 Numerical simulation of thermally induced workpiece deforma- Damage tion in turning when using various cutting fluid applications, A constitutive model for the metals subjected to thermomechan- 408 ical loading with fast heating during heating-assisted form- Computer simulation of single-point diamond turning using finite ing, 244 element method, 549 Debonding Effects of welding speed, energy input and heat source distribution Prediction for debonding damage process of glass beads-reinforced on temperature variations in butt joint welding, 393 modified polyphenylene oxide under simple shear, 429 Finite element simulation Deep drawing Finite element investigation of the flow stress dependence of chip Recent developments in friction-assisted sheet metal forming formation, 1 processes, 161 Finite element Delamination Residual stress simulation in welded sections of P91 pipes, 480 The path towards delamination-free drilling of composite Flange materials, 251 Precision forming of flange for a large special vessel, 224 Die and mould making Flash Machining of micro/miniature dies and moulds by electrical Numerical determination of blank shapes for warm forming of discharge machining—Recent development, 488 non-axisymmetric components, 472 Subject Index of Volume 167 559 Flow forming Hydroforming Effects of roller path and geometry on the flow forming of solid Enhancing the formability of aluminium components via tempera- cylindrical components, 344 ture controlled hydroforming, 363 Flow stress law Research and advances in fundamentals and industrial applications Finite element investigation of the flow stress dependence of chip of hydroforming, 383 formation, 1 Hydromechanical deep drawing (HDD) with uniform pressure onto Flow stress the blank Numerical determination of blank shapes for warm forming of Investigation into the forming of a complex cup locally constrained non-axisymmetric components, 472 by a round die based on an innovative hydromechanical deep Focusing characteristics drawing method, 191 Fusion zone during focused electron-beam welding, 265 Forging IF steel Modelling the forging and post-forging cooling of C70S6 conrods, Evolution of textures in interstitial free steel during multiple cold 529 rolling and annealing, 132 Forming process IHBF Controlled strain path forming process with space variant blank Progress in shell hydroforming, 230 holder force using RSM method, 447 Images analysis Forming sequences Computer aided classification of flaws occurred during casting of Forming of hollow gear-shafts with pressure-assisted injection aluminum, 456 forging (PAIF), 294 In situ scanning electron microscopy (SEM) Forming Prediction for debonding damage process of glass beads-reinforced Laser applications in microtechnology, 494 modified polyphenylene oxide under simple shear, 429 Forming-limits Incremental forming Forming of hollow gear-shafts with pressure-assisted injection Effects of roller path and geometry on the flow forming of solid forging (PAIF), 294 cylindrical components, 344 Free-Bending Inverse problem Free-Bending—A new bending technique in the hydroforming Thermal conductivity investigation for upsetting with a procedure process chain, 302 of combining inverse model and the proposed regularization of Friction assisted Tikhonov method, 208 Recent developments in friction-assisted sheet metal forming processes, 161 Joining Fusion zone Laser applications in microtechnology, 494 Fusion zone during focused electron-beam welding, 265 Kalman filtering Gear-shafts Improving surface roughness in turning using optimal control of Forming of hollow gear-shafts with pressure-assisted injection tool’s radial position, 54 forging (PAIF), 294 Geometric variables Laser forming Numerical determination of blank shapes for warm forming of Influence of material properties on the laser-forming process of non-axisymmetric components, 472 sheet metals, 124 Grain refinement Laser hardening Process design for refinement and homogenization of microstruc- Characterization of dry sliding wear resistance of laser surface ture in bar rolling, 273 hardened En 8 steel, 83 Laser welding Hardened steel Microstructure and tensile properties of Inconel 718 pulsed Nd- Comparison of chip surface temperature between up and down YAG laser welds, 73 milling orientations in high speed rough milling of hardened Laser steel, 110 Laser applications in microtechnology, 494 Head mounted display Latex binder A new hybrid dynamic modelling approach for process planning, Study of the effect of latex binder on the green and fired properties 22 of ZnO varistor discs and estimation of Weibull parameters, Heating-assisted forming 542 A constitutive model for the metals subjected to thermomechanical Laves phase loading with fast heating during heating-assisted forming, 244 Microstructure and tensile properties of Inconel 718 pulsed Nd- High speed machining YAG laser welds, 73 A review of micro and nanomachining from a materials perspec- Limit strains tive, 316 A personal reflection of mesoplasticity and its applications, 151 High speed rough milling Local thermal inconsistency Comparison of chip surface temperature between up and down A constitutive model for the metals subjected to thermomechanical milling orientations in high speed rough milling of hardened loading with fast heating during heating-assisted forming, 244 steel, 110 “Self-supporting” ceramic mold Hot forging Microstructure and mechanical properties of precision cast TiAl Prediction of wear in hot forging tools by means of finite-element- turbocharger wheel, 14 analysis, 309 Hot forming Machines Modelling of microstructure evolution in hot forming using unified Research and advances in fundamentals and industrial applications constitutive equations, 354 of hydroforming, 383 560 Subject Index of Volume 167 Machining theory Microstructure A review of micro and nanomachining from a materials perspec- Microstructure and mechanical properties of precision cast TiAl tive, 316 turbocharger wheel, 14 Machining Modelling the forging and post-forging cooling of C70S6 conrods, Finite element investigation of the flow stress dependence of chip 529 formation, | Microtechnology Macroplasticity Laser applications in microtechnology, 494 A personal reflection of mesoplasticity and its applications, 151 Miniature and micro components manufacturing Magnesium alloy Design of ultraprecision machine tools with applications to manu- Mean flank temperature measurement in high speed dry cutting of facture of miniature and micro components, 515 magnesium alloy, 119 Monte Carlo method Manufacturing technology Optimization of stamping processes aiming at maximal process Micro milling of sintered tungsten—copper composite materials, stability, 237 402 Mould design Material properties Improvement of the temperature distribution in continuous casting Influence of material properties on the laser-forming process of moulds through the rearrangement of the cooling water slots, sheet metals, 124 508 Materials modelling Multifunctional machine tool Modelling of microstructure evolution in hot forming using unified Precision forming of flange for a large special vessel, 224 constitutive equations, 354 Mean flank temperature Nanoceramics Mean flank temperature measurement in high speed dry cutting of Novel nanocomposites and nanoceramics based on polymer magnesium alloy, 119 nanofibers using electrospinning process—A review, 283 Meso machine tools Nanocomposites A review of micro and nanomachining from a materials perspec- Novel nanocomposites and nanoceramics based on polymer tive, 316 nanofibers using electrospinning process—A review, 283 Mesoplasticity Nanomachining A personal reflection of mesoplasticity and its applications, 151 A review of micro and nanomachining from a materials perspec- 3D microstructures and devices tive, 316 Design of ultraprecision machine tools with applications to manu- Nanomanipulation facture of miniature and micro components, 515 Nanomanipulation in a scanning electron microscope, 371 Micro milling Nanotools Micro milling of sintered tungsten—copper composite materials, Nanomanipulation in a scanning electron microscope, 371 402 Nb segregation Micro-cutting force variation Microstructure and tensile properties of Inconel 718 pulsed A personal reflection of mesoplasticity and its applications, 151 Nd-YAG laser welds, 73 Micro-electrical discharge machining Net-shape forming of hypereutectic Al—Si alloy Machining of micro/miniature dies and moulds by electrical A novel method for net-shape forming of hypereutectic Al—Si discharge machining—Recent development, 488 alloys by thixocasting with powder preforms, 103 Microgripper Neural networks Nanomanipulation in a scanning electron microscope, 371 Computer aided classification of flaws occurred during casting of Micro-handling systems aluminum, 456 Recent development in micro-handling systems for micro- Non-traditional manufacturing, 499 The path towards delamination-free drilling of composite Microinjection moulding materials, 251 Micromilling of hardened tool steel for mould making applica- tions, 201 Optimal control Micromachining Improving surface roughness in turning using optimal control of A review of micro and nanomachining from a materials tool’s radial position, 54 perspective, 316 Optimisation Micro-manufacturing Optimisation of wind turbine blades, 463 Machining of micro/miniature dies and moulds by electrical Optimization discharge machining—Recent development, 488 Optimization of stamping processes aiming at maximal process Micromilling stability, 237 Micromilling of hardened tool steel for mould making applica- Orientations tions, 201 Comparison of chip surface temperature between up and down Micro-parts milling orientations in high speed rough milling of hardened Recent development in micro-handling systems for micro- steel, 110 manufacturing, 499 Origin of M—K groove Micro-plastic deformation A personal reflection of mesoplasticity and its applications, 151 Ultra-precision machining induced micro-plastic deformation in Oxide ceramics Zn—Al based alloy, 536 The structure and functional properties of PVD and CVD coated Microstructure evolution Al,O, + ZrO, oxide tool ceramics, 438 Process design for refinement and homogenization of micro- structure in bar rolling, 273 P91 pipes Modelling of microstructure evolution in hot forming using unified Residual stress simulation in welded sections of P91 pipes, constitutive equations, 354 480 Subject Index of Volume 167 561 Particulate polymer composites Redrawing Prediction for debonding damage process of glass beads-reinforced Recent developments in friction-assisted sheet metal forming modified polyphenylene oxide under simple shear, 429 processes, 161 Phase transformation Regularization of the Tikhonov method Ultra-precision machining induced micro-plastic deformation in Thermal conductivity investigation for upsetting with a procedure Zn—Al based alloy, 536 of combining inverse model and the proposed regularization of Pilot hole Tikhonov method, 208 The path towards delamination-free drilling of composite materi- Residual stresses als, 251 Residual stress simulation in welded sections of P91 pipes, Polymer nanofibers 480 Novel nanocomposites and nanoceramics based on polymer Response surface methodology nanofibers using electrospinning process—A review, 283 Optimization of stamping processes aiming at maximal process Post-weld heat treatments stability, 237 Microstructure and tensile properties of Inconel 718 pulsed Controlled strain path forming process with space variant blank Nd-YAG laser welds, 73 holder force using RSM method, 447 Powder compaction Roller tool Study of the effect of latex binder on the green and fired properties Effects of roller path and geometry on the flow forming of solid of ZnO varistor discs and estimation of Weibull parameters, cylindrical components, 344 542 Rolling texture Powder preform Evolution of textures in interstitial free steel during multiple cold A novel method for net-shape forming of hypereutectic Al—Si rolling and annealing, 132 alloys by thixocasting with powder preforms, 103 Round edge cutting tool model Precision bending Computer simulation of single-point diamond turning using finite Precision forming of flange for a large special vessel, 224 element method, 549 Precision casting Microstructure and mechanical properties of precision cast TiAl Scanning electron microscope turbocharger wheel, 14 Nanomanipulation in a scanning electron microscope, 371 Precision forming Semi-solid metal forming Precision forming of flange for a large special vessel, 224 A novel method for net-shape forming of hypereutectic Al—Si Precision welding alloys by thixocasting with powder preforms, 103 Precision forming of flange for a large special vessel, 224 Shear band Preforming A personal reflection of mesoplasticity and its applications, 151 Progress in shell hydroforming, 230 Shear damage Pressure-assisted injection forging Prediction for debonding damage process of glass beads-reinforced Forming of hollow gear-shafts with pressure-assisted injection modified polyphenylene oxide under simple shear, 429 forging (PAIF), 294 Shear slitting Process control 3D modeling of shear-slitting process for aluminum alloys, 91 New developments in the process control of the hybrid electro Sheet hydroforming chemical discharge machining (ECDM) process, 338 Investigation into the forming of a complex cup locally constrained Process design by a round die based on an innovative hydromechanical deep Process design for refinement and homogenization of microstruc- drawing method, 191 ture in bar rolling, 273 Sheet metal forming Process downscaling Recent developments in friction-assisted sheet metal forming Micromilling of hardened tool steel for mould making applica- processes, 161 tions, 201 Sheet metal Process plan A study on the bi-directional springback of sheet metal stamping, A new hybrid dynamic modelling approach for process planning, 33 22 Influence of material properties on the laser-forming process of Processing window sheet metals, 124 Microstructure and mechanical properties of precision cast TiAl Specimen for a novel concept of the biaxial tension test, 177 turbocharger wheel, 14 Shell hydrobulging Production process Progress in shell hydroforming, 230 Numerical simulation of thermally induced workpiece deforma- Shop floor tion in turning when using various cutting fluid applications, A new hybrid dynamic modelling approach for process planning, 408 22 PVD Simulation The structure and functional properties of PVD and CVD coated A new hybrid dynamic modelling approach for process planning, Al,O, + ZrO, oxide tool ceramics, 438 22 Investigation into the forming of a complex cup locally constrained Rapid prototyping by a round die based on an innovative hydromechanical deep Dynamic reverse compensation to increase the accuracy of the drawing method, 191 rapid prototyping system, 167 Free-Bending—A new bending technique in the hydroforming Real time control process chain, 302 New developments in the process control of the hybrid electro Computer simulation of single-point diamond turning using finite chemical discharge machining (ECDM) process, 338 element method, 549 Recrystallization Single point diamond turning A personal reflection of mesoplasticity and its applications, 151 A personal reflection of mesoplasticity and its applications, 151 562 Subject Index of Volume 167 Single-point diamond turning Thermal conductivity Computer simulation of single-point diamond turning using finite Thermal conductivity investigation for upsetting with a procedure element method, 549 of combining inverse model and the proposed regularization of Size effects Tikhonov method, 208 Micromilling of hardened tool steel for mould making applica- Thermal deformation tions, 201 Numerical simulation of thermally induced workpiece deformation Space variant blank holder force in turning when using various cutting fluid applications, 408 Controlled strain path forming process with space variant blank Thermal hydroforming holder force using RSM method, 447 Enhancing the formability of aluminium components via tempera- Special drill ture controlled hydroforming, 363 The path towards delamination-free drilling of composite materi- Thermomechanical properties als, 251 A constitutive model for the metals subjected to thermomechanical Spherical glass chips loading with fast heating during heating-assisted forming, 244 The novel bondless wheel, spherical glass chips and a new method Thickness thinning of aspheric generation, 184 Progress in shell hydroforming, 230 Springback Thickness A study on the bi-directional springback of sheet metal stamping, Dynamic thickness simulation of five-stand continuous cold 33 rolling, 218 Process analysis software for the prediction of elongation with Thin-walled tubes respect to the draw bending of small diameter thin walled Process analysis software for the prediction of elongation with tubing, 41 respect to the draw bending of small diameter thin walled Stability tubing, 41 Optimization of stamping processes aiming at maximal process Thixocasting stability, 237 A novel method for net-shape forming of hypereutectic Al—Si Stamping alloys by thixocasting with powder preforms, 103 A study on the bi-directional springback of sheet metal stamping, Thrust force 33 The path towards delamination-free drilling of composite Optimization of stamping processes aiming at maximal process materials, 251 stability, 237 Ti6Al4V Standards Investigation on Ti6Al4V laser welding using statistical and Recent development in micro-handling systems for micro-manu- Taguchi approaches, 422 facturing, 499 TiAl Stereolithography Microstructure and mechanical properties of precision cast TiAl Dynamic reverse compensation to increase the accuracy of the turbocharger wheel, 14 rapid prototyping system, 167 Tool wear Stochastic cutting process Prediction of wear in hot forging tools by means of finite-element- Improving surface roughness in turning using optimal control of analysis, 309 tool’s radial position, 54 A review of micro and nanomachining from a materials Strain path perspective, 316 A personal reflection of mesoplasticity and its applications, 151 Tools Structuring Research and advances in fundamentals and industrial applications Laser applications in microtechnology, 494 of hydroforming, 383 Surface roughness Transformation hardening Some surface characteristics due to center rest ball burnishing, Characterization of dry sliding wear resistance of laser surface 47 hardened En 8 steel, 83 Improving surface roughness in turning using optimal control of Transient temperature history tool’s radial position, 54 Effects of welding speed, energy input and heat source distribution Surface roundness on temperature variations in butt joint welding, 393 Some surface characteristics due to center rest ball burnishing, Tribology 47 Recent advances in the chromium nitride PVD process for forming Surface treatments and machining surface protection, 415 Recent advances in the chromium nitride PVD process for forming Tubular components and machining surface protection, 415 Forming of hollow gear-shafts with pressure-assisted injection forging (PAIF), 294 Taguchi DOE Tungsten—copper Investigation on Ti6AI4V laser welding using statistical and Micro milling of sintered tungsten—copper composite materials, Taguchi approaches, 422 402 Technological science Computer aided classification of flaws occurred during casting of Ultraprecision machines design aluminum, 456 Design of ultraprecision machine tools with applications to Temperature distribution manufacture of miniature and micro components, 515 Improvement of the temperature distribution in continuous casting Ultraprecision machining moulds through the rearrangement of the cooling water slots, Design of ultraprecision machine tools with applications to 508 manufacture of miniature and micro components, 515 Tensile properties Ultra-precision machining Microstructure and mechanical properties of precision cast TiAl Ultra-precision machining induced micro-plastic deformation in turbocharger wheel, 14 Zn—Al based alloy, 536 Subject Index of Volume 167 563 Unified constitutive equations Weibull parameters Modelling of microstructure evolution in hot forming using unified Study of the effect of latex binder on the green and fired properties constitutive equations, 354 of ZnO varistor discs and estimation of Weibull parameters, Upsetting 542 Thermal conductivity investigation for upsetting with a procedure Welding heat source of combining inverse model and the proposed regularization of Effects of welding speed, energy input and heat source distribution Tikhonov method, 208 on temperature variations in butt joint welding, 393 Welding Virtual reality Investigation on Ti6Al4V laser welding using statistical and A new hybrid dynamic modelling approach for process planning, Taguchi approaches, 422 22 Welds Visual control Residual stress simulation in welded sections of P91 pipes, 480 Nanomanipulation in a scanning electron microscope, 371 Wind turbine blade Optimisation of wind turbine blades, 463 Warm forming Wrinkling Numerical determination of blank shapes for warm forming of Progress in shell hydroforming, 230 non-axisymmetric components, 472 Warm hydroforming Zn—Al alloys Research and advances in fundamentals and industrial applications Ultra-precision machining induced micro-plastic deformation in of hydroforming, 383 Zn—Al based alloy, 536 Wear resistance ZnO varistor disc Characterization of dry sliding wear resistance of laser surface Study of the effect of latex binder on the green and fired properties hardened En 8 steel, 83 of ZnO varistor discs and estimation of Weibull parameters, 542 Wear ZrO, The structure and functional properties of PVD and CVD coated The structure and functional properties of PVD and CVD coated AL,O, + ZrO, oxide tool ceramics, 438 Al,O, + ZrO, oxide tool ceramics, 438