Table Of Content

Journal of Materials Processing Technology Journal of Materials Processing Technology 148 (2004) 395 www.elsevier.com/locate/jmatprotec Author Index of Volume 148 Abbaspour, M., 35 Ferreira, J.M.F., 139 Oztas, O., 103 Abdullah, K., 177 Puck Z., 25 Abou-Ali, M.G., 132 Peng, D.S., 245 Akdemir, E., 376 Gologlu, C., 83 Persson, A., 108 Altan, B.S., 279 Goumri-Said, S., 50 Ping, L., 235 Aourag, H., 50 Grandhi, R.V., 342 Pratihar, D.K., 288 Guo, Y.B., 368 Purcek, G., 279 Bayramoglu, M., 196 Behzadipour, S., 353 Ha, D.-S., 342 Raabe, D., 68 Belluco, W., 171 Hao, Q.T., 25 Ramasawmy, H., 155 Bergstrom, J., 108 Hao, Y., 8 Ribeiro, M.J., 139 Bezerra, A.A., 147 Hascalyk, A., 362 Rogge, R., 177 Biglou, J., 353 Hogmark, S., 108 Rossi, S., 301 Birol, Y., 250 Hu, H., 57 Blunt, L., 155 Huang, C.-C., 382 Saboonchi, A., 35 Boumaiza, S., 269 Huétink, J., 328 Sachtleber, M., 68 Braghini Jr., A., 147 Husnu Dirikolu, M Saklakoglu, N., 103 Brunet, M., 269 Salomon, L., 50 Jeswiet, J.J., 177 Sen, S., 1 Campbell, J., 310 Jiang, W., 93 Sen, U., 1 Capello, E., 186 Jianrong, T., 235 Shang, H., 77 Caydas, U., 362 Juan, C.-C., 165 Shen, J., 25 Chan, W.M., 15 Shouman, M.A., 132 Chen, C.-F., 226 Kemin, X., 235 Silva, L.R., 147 Chen, D., 30 Kevin Chou, Y., 259 Song, H., 259 Chen, F., 57 Khajepour, A., 353 Sun, J., 8 Chen, T.J., 8 Kim, J.-B., 342 Chen, X., 57 Kovacevic, R., 93 Tanoglu, M., 103 Chen, Z.P., 204 Tao, J.P., 239 Cheng, J.-H., 382 Labrincha, J.A., 139 Thomson, P.F., 204 Cheng, P., 57 Lang, L., 119 Tsay, C.-B., 226 Cheng, Y.-M., 317 Lee, H.P., 15 Tulyaganov, D.U., 139 Cheok, B.T., 15 Lenard, J.G., 353 Chew, H.1., 15 Li: BZ... 310 Venturini, F., 301 Chiou, C.-H., 317 Choi, J.-H., 342 Wang, H., 93 Chou, Y.K., 368 Wang, L.J., 239 Chu, Y.-1., 57 B Yt S10 Wang, S.-F., 165 Clapham, L., 177 Lin, G.Y., 245 Wang, S.-M., 317 Coelho, R.T., 147 Lin, Q.Q., 245 Wang, X., 239 Cubukcuoglu, O., 103 Liu, L., 25 Weiland, H., 68 Liu, Z., 77 Wild, P.M., 177 Dai, F., 77 Wisselink, H.H., 328 Danckert, J., 119 Martin, P., 220 Wu, S., 30 De Chiffre, L., 171 Méausoone, P.-J., 220 Deflorian, F., 301 Miskioglu, I., 279 Xie, H.,. 77 Duffill, A.W., 196 Dufour, J.-P., 50 Nandi, A.K., 288 Yan, L., 235 Nefussi, G., 269 Yang, L.B., 245 Etem Saklakoglu, I., 103 Nielsen, K.B., 119 Yang, T.C.K., 165 Eyma, F., 220 Yilmaz, F., | Ooi, P.H., 279 Fang, D., 77 Ouyang, J., 93 Zhang, H., 245 Elsevier B.V. doi: 10.1016/S0924-0136(04)00439-X Journal of Materials Processing Technology ELSEVIER Journal of Materials Processing Technology 148 (2004) 396-400 www.elsevier.com/locate/jmatprotec Subject Index of Volume 148 AA6063 Ceramic packaging The effect of homogenization practice on the microstructure of Effect of lamination conditions on sintered properties of AA6063 billets, 250 glass-ceramic substrates for microelectronic packaging, AAS013 aluminum alloy 165 Mechanical properties and microstructural evaluation of AAS013 Circular-are teeth aluminum alloy treated in the semi-solid state by SIMA process, Computerized tooth profile generation and analysis of character- 103 istics of elliptical gears with circular-are teeth, 226 AISI DS tool steel CNC Experimental study of wire electrical discharge machining of AISI CNC EDM of linear and circular contours using plate tools, DS tool steel, 362 196 Al alloy Coating Rapid prototyping of 4043 Al-alloy parts by VP-GTAW, 93 Surface roughening and color changes of coated aluminum sheets ALE method during plastic straining, 68 3D FEM simulation of stationary metal forming processes with Coatings applications to slitting and rolling, 328 Improvement of surface finishing and corrosion resistance of Al-rich sludge prototypes produced by direct metal laser sintering, 301 Production of Al-rich sludge-containing ceramic bodies by differ- Colorimetry ent shaping techniques, 139 Surface roughening and color changes of coated aluminum sheets Aluminum during plastic straining, 68 Surface roughening and color changes of coated aluminum sheets Composite laminates during plastic straining, 68 Workpiece damping and its effect on delamination damage in Aluminum alloy drilling thin composite laminates, 186 Investigation into hydrodynamic deep drawing assisted by radial Computer-aided process planning pressure. Part I. Experimental observations of the forming Machine capability and fixturing constraints-imposed automatic process of aluminum alloy, 119 machining set-ups generation, 83 Dynamic and static softening behaviors of aluminum alloys during Conceptual fixture design multistage hot deformation, 245 Machine capability and fixturing constraints-imposed automatic Artificial neural network machining set-ups generation, 83 Neural network prediction of flow stress of Ti-15—3 alloy under hot Cooling system geometry compression, 235 Changing the geometry of water spray on milling work roll and its Automatic design effect on work roll temperature, 35 Automatic design of fuzzy logic controller using a genetic algo- Corrosion protection rithm—to predict power requirement and surface finish in Improvement of surface finishing and corrosion resistance of grinding, 288 prototypes produced by direct metal laser sintering, 301 Automatic set-up planning Crystal lattice Machine capability and fixturing constraints-imposed automatic A novel nano-Moiré method with scanning tunneling microscope machining set-ups generation, 83 (STM), 77 Cutting fluids Boronizing Performance evaluation of vegetable-based oils in drilling auste- An evaluation of some properties of borides deposited on boronized nitic stainless steel, 171 ductile iron, | Cutting forces Brass Performance evaluation of vegetable-based oils in drilling auste- Failure modes in field-tested brass die casting dies, 108 nitic stainless steel, 171 Strains and cutting forces involved in the solid wood rotating Cast dendritic ZA27 alloy cutting process, 220 The microstructural and constitutional evolution of cast dendritic An improved dynamic cutting force model for end-milling process, ZA27 alloy during partial remelting, 8 317 Casting Filling system for investment cast Ni-base turbine blades, Damage free machining 310 Workpiece damping and its effect on delamination damage in Ceramic and PCBN tools drilling thin composite laminates, 186 Some effects of cutting edge preparation and geometric modifica- Damping tions when turning INCONEL 718™ at high cutting speeds, Workpiece damping and its effect on delamination damage in 147 drilling thin composite laminates, 186 Elsevier B.V. doi: 10.1016/S0924-0136(04)00440-6 Subject Index of Volume 148 Data acquisition End mill Effect of cooling water flow rates on local temperatures and heat An improved dynamic cutting force model for end-milling process, transfer of casting dies, 57 317 Defects Equal-channel angular pressing Filling system for investment cast Ni-base turbine blades, 310 Processing of eutectic Zn—5% Al alloy by equal-channel angular Defferential theory pressing, 279 Numerical study of photolithography system: electromagnetic dif- Ester oils ferential method, 50 Performance evaluation of vegetable-based oils in drilling auste- Deformation behaviour nitic stainless steel, 171 Deformation behaviours of laser curve bending of sheet metals, Experimental analysis 30 Investigation into hydrodynamic deep drawing assisted by radial Delamination pressure. Part I. Experimental observations of the forming Workpiece damping and its effect on delamination damage in process of aluminum alloy, 119 drilling thin composite laminates, 186 Extrusion Density The effect of homogenization practice on the microstructure of Strains and cutting forces involved in the solid wood rotating AA6063 billets, 250 cutting process, 220 Die casting Failure mechanisms Effect of cooling water flow rates on local temperatures and heat Failure modes in field-tested brass die casting dies, 108 transfer of casting dies, 57 Fatigue Failure modes in field-tested brass die casting dies, 108 A study of post-form static and fatigue properties of superplastic Die design 7475-SPF and 5083-SPF aluminium alloys, 204 Processing of eutectic Zn—5% Al alloy by equal-channel angular FEM simulation pressing, 279 Deformation behaviours of laser curve bending of sheet metals, 30 Dielectric constant Field test Effect of lamination conditions on sintered properties of glass- Failure modes in field-tested brass die casting dies, 108 ceramic substrates for microelectronic packaging, 165 Finite element analysis Direct metal laser sintering Finite element analysis of spring-back of V-bending sheet metal Improvement of surface finishing and corrosion resistance of forming processes, 15 prototypes produced by direct metal laser sintering, 301 Finite element method Directional solidification A new shape change quantification method for estimation of power Electromagnetic shaping and solidification control of Ni-base in shape rolling, 353 superalloys under vacuum, 25 An investigation into the forming limits of sintered porous materials Dispatching rules under different operational conditions, 382 Effect of dynamic and static dispatching strategies on dynamically Flexible forming planned and unplanned FMS, 132 Computer aided modelling of flexible forming process, 376 Distributed computing simulation Flexible manufacturing systems Inverse design of glass forming process simulation using an opti- Effect of dynamic and static dispatching strategies on dynamically mization technique and distributed computing, 342 planned and unplanned FMS, 132 Drilling FMS scheduling Performance evaluation of vegetable-based oils in drilling auste- Effect of dynamic and static dispatching strategies on dynamically nitic stainless steel, 171 planned and unplanned FMS, 132 Workpiece damping and its effect on delamination damage in Forming limit diagrams drilling thin composite laminates, 186 Unified failure analysis for tubular hydroforming, 269 Ductile irons Forming limits An evaluation of some properties of borides deposited on boronized An investigation into the forming limits of sintered porous materials ductile iron, | under different operational conditions, 382 Dynamic softening Fracture toughness Dynamic and static softening behaviors of aluminum alloys during An evaluation of some properties of borides deposited on boronized multistage hot deformation, 245 ductile iron, | FRPs Edge preparation Investigation on thrust in vibration drilling of fiber-reinforced Some effects of cutting edge preparation and geometric modifica- plastics, 239 tions when turning INCONEL 718'™ at high cutting speeds, 147 Fuzzy logic controller EDM Automatic design of fuzzy logic controller using a genetic algo- CNC EDM of linear and circular contours using plate tools, 196 rithm—to predict power requirement and surface finish in Electro discharge machining grinding, 288 Effect of EDM process parameters on 3D surface topography, 155 Electroless nickel Gas tungsten arc welding Improvement of surface finishing and corrosion resistance of Rapid prototyping of 4043 Al-alloy parts by VP-GTAW, 93 prototypes produced by direct metal laser sintering, 301 Gauge Electromagnetic shaping Neutron diffraction residual stress mapping in same gauge and Electromagnetic shaping and solidification control of Ni-base differential gauge tailor-welded blanks, i77 superalloys under vacuum, 25 Genetic algorithm Elliptical gear Automatic design of fuzzy logic controller using a genetic algo- Computerized tooth profile generation and analysis of character- rithm—to predict power requirement and surface finish in istics of elliptical gears with circular-are teeth, 226 grinding, 288 398 Subject Index of Volume 148 Glass forming process Mathematical model Inverse design of glass forming process simulation using an opti- Computerized tooth profile generation and analysis of character- mization technique and distributed computing, 342 istics of elliptical gears with circular-arc teeth, 226 Grinding Mechanical characteristics Automatic design of fuzzy logic controller using a genetic algo- Strains and cutting forces involved in the solid wood rotating rithm—to predict power requirement and surface finish in cutting process, 220 grinding, 288 Metal cutting The determination of ploughing force and its influence on material Hard turning properties in metal cutting, 368 Tool nose radius effects on finish hard turning, 259 Metal forming Hardness Finite element analysis of spring-back of V-bending sheet metal An evaluation of some properties of borides deposited on boronized forming processes, 15 ductile iron, 1 Microstructural evolution Heat transfer The microstructural and constitutional evolution of cast dendritic Effect of cooling water flow rates on local temperatures and heat ZA27 alloy during partial remelting, 8 transfer of casting dies, 57 Microstructure Heat transfer coefficients Rapid prototyping of 4043 Al-alloy parts by VP-GTAW, 93 Inverse design of glass forming process simulation using an opti- The effect of homogenization practice on the microstructure of mization technique and distributed computing, 342 AA6063 billets, 250 High temperature flow characteristics Mooney-Rivlin Neural network prediction of flow stress of Ti-15-—3 alloy under hot Computer aided modelling of flexible forming process, 376 compression, 235 Mullite—alumina refractories High-speed machining Production of Al-rich sludge-containing ceramic bodies by differ- Some effects of cutting edge preparation and geometric modifica- ent shaping techniques, 139 tions when turning INCONEL 718"™ at high cutting speeds, 147 Multistage hot deformation Homogenization Dynamic and static softening behaviors of aluminum alloys during The effect of homogenization practice on the microstructure of multistage hot deformation, 245 AA6063 billets, 250 Hot work tool steel Nano-metrology Failure modes in field-tested brass die casting dies, 108 A novel nano-Moiré method with scanning tunneling microscope Hydrodynamic deep drawing assisted by radial pressure (STM), 77 Investigation into hydrodynamic deep drawing assisted by radial Nano-Moiré pressure. Part I. Experimental observations of the forming A novel nano-Moiré method with scanning tunneling microscope process of aluminum alloy, 119 (STM), 77 Hydroforming Necking criterion Investigation into hydrodynamic deep drawing assisted by radial Unified failure analysis for tubular hydroforming, 269 pressure. Part I. Experimental observations of the forming Neural network process of aluminum alloy, 119 A new shape change quantification method for estimation of power Unified failure analysis for tubular hydroforming, 269 in shape rolling, 353 Neutron diffraction Instantaneous shear plane Neutron diffraction residual stress mapping in same gauge and An improved dynamic cutting force model for end-milling process, differential gauge tailor-welded blanks, 177 317 Ni-base Internal water cooling Filling system for investment cast Ni-base turbine blades, 310 Effect of cooling water flow rates on local temperatures and heat Nickel-based alloys transfer of casting dies, 57 Some effects of cutting edge preparation and geometric modifica- Inverse problem tions when turning INCONEL 718'™ at high cutting speeds, Inverse design of glass forming process simulation using an opti- 147 mization technique and distributed computing, 342 Nonlinear analysis Investment Computer aided modelling of flexible forming process, 376 Filling system for investment cast Ni-base turbine blades, 310 Oblique cutting Lamellar gratings An improved dynamic cutting force model for end-milling process, Numerical study of photolithography system: electromagnetic dif- 317 ferential method, 50 Optimization technique Lamination Inverse design of glass forming process simulation using an opti- Effect of lamination conditions on sintered properties of glass- mization technique and distributed computing, 342 ceramic substrates for microelectronic packaging, 165 Laser curve bending Partial remelting Deformation behaviours of laser curve bending of sheet metals, The microstructural and constitutional evolution of cast dendritic 30 ZA27 alloy during partial remelting, 8 Layer deposition Periodic masks Rapid prototyping of 4043 Al-alloy parts by VP-GTAW, 93 Numerical study of photolithography system: electromagnetic differential method, 50 Material properties Periodic state The determination of ploughing force and its influence on material Inverse design of glass forming process simulation using an opti- properties in metal cutting, 368 mization technique and distributed computing, 342 Subject Index of Volume 148 Phase transformation Shaping techniques The microstructural and constitutional evolution of cast dendritic Production of Al-rich sludge-containing ceramic bodies by differ- ZA27 alloy during partial remelting, 8 ent shaping techniques, 139 Photolithography Sheet forming Numerical study of photolithography system: electromagnetic dif- Surface roughening and color changes of coated aluminum sheets ferential method, 50 during plastic straining, 68 Plastic-buckling Sheet metal Unified failure analysis for tubular hydroforming, 269 Computer aided modelling of flexible forming process, 376 Plasticity Sheet metals An investigation into the forming limits of sintered porous materials Deformation behaviours of laser curve bending of sheet metals, 30 under different operational conditions, 382 Unified failure analysis for tubular hydroforming, 269 Ploughing force SIMA process The determination of ploughing force and its influence on material Mechanical properties and microstructural evaluation of AASO13 properties in metal cutting, 368 aluminum alloy treated in the semi-solid state by SIMA process, Pointed teeth 103 Computerized tooth profile generation and analysis of character- Sintering shrinkage istics of elliptical gears with circular-arce teeth, 226 Effect of lamination conditions on sintered properties of glass- Porous materials ceramic substrates for microelectronic packaging, 165 An investigation into the forming limits of sintered porous materials Sitting under different operational conditions, 382 3D FEM simulation of stationary metal forming processes with Post-form properties applications to slitting and rolling, 328 A study of post-form static and fatigue properties of superplastic 5083-SPF 7475-SPF and 5083-SPF aluminium alloys, 204 A study of post-form static and fatigue properties of superplastic Powder forging 7475-SPF and 5083-SPF aluminium alloys, 204 An investigation into the forming limits of sintered porous materials 7475-SPF under different operational conditions, 382 A study of post-form static and fatigue properties of superplastic Power requirement 7475-SPF and 5083-SPF aluminium alloys, 204 Automatic design of fuzzy logic controller using a genetic algo- Static softening rithm—to predict power requirement and surface finish in Dynamic and static softening behaviors of aluminum alloys during grinding, 288 multistage hot deformation, 245 Prototyping Superalloys Improvement of surface finishing and corrosion resistance Electromagnetic shaping and solidification control of Ni-base of prototypes produced by direct metal laser sintering, superalloys under vacuum, 25 301 Superplastic forming A study of post-form static and fatigue properties of superplastic 7475-SPF and 5083-SPF aluminium alloys, 204 Rapid prototyping Superplasticity Rapid prototyping of 4043 Al-alloy parts by VP-GTAW, 93 A study of post-form static and fatigue properties of superplastic Recycling 7475-SPF and 5083-SPF aluminium alloys, 204 Production of Al-rich sludge-containing ceramic bodies by differ- Surface characterization ent shaping techniques, 139 Surface roughening and color changes of coated aluminum sheets Residual stress during plastic straining, 68 Some effects of cutting edge preparation and geometric modifica- Surface finish tions when turning INCONEL 718™ at high cutting speeds, Tool nose radius effects on finish hard turning, 259 147 Automatic design of fuzzy logic controller using a genetic algo- R-matrix algorithm rithm—to predict power requirement and surface finish in Numerical study of photolithography system: electromagnetic dif- grinding, 288 ferential method, 50 Surface integrity Roughness Experimental study of wire electrical discharge machining of AISI Surface roughening and color changes of coated aluminum sheets DS tool steel, 362 during plastic straining, 68 Surface mechanics Surface roughening and color changes of coated aluminum sheets Scanning tunneling microscope during plastic straining, 68 A novel nano-Moiré method with scanning tunneling microscope Surface roughness (STM), 77 Some effects of cutting edge preparation and geometric modifica- Semi-solid forming tions when turning INCONEL 718'™ at high cutting speeds, The microstructural and constitutional evolution of cast dendritic 147 ZA27 alloy during partial remelting, 8 Semi-solid processing Taguchi orthogonal array Mechanical properties and microstructural evaluation of AASO13 Effect of EDM process parameters on 3D surface topography, aluminum alloy treated in the semi-solid state by SIMA process, 155 103 Testing Shape rolling Performance evaluation of vegetable-based oils in drilling auste- 3D FEM simulation of stationary metal forming processes with nitic stainless steel, 171 applications to slitting and rolling, 328 Thermal crown A new shape change quantification method for estimation of power Changing the geometry of water spray on milling work roll and its in shape rolling, 353 effect on work roll temperature, 35 400 Subject Index of Volume 148 Thermal expansion Vegetable oils Effect of lamination conditions on sintered properties of glass- Performance evaluation of vegetable-based oils in drilling auste- ceramic substrates for microelectronic packaging, 165 nitic stainless steel, 171 Thermal fatigue Vibration drilling Failure modes in field-tested brass die casting dies, 108 Investigation on thrust in vibration drilling of fiber-reinforced Thrust plastics, 239 Investigation on thrust in vibration drilling of fiber-reinforced plastics, 239 Water flow Ti-15-3 alloy Effect of cooling water flow rates on local temperatures and heat Neural network prediction of flow stress of Ti-15—3 alloy under hot transfer of casting dies, 57 compression, 235 Wear mechanisms Tool nose radius Some effects of cutting edge preparation and geometric modifica- Tool nose radius effects on finish hard turning, 259 tions when turning INCONEL 718'™ at high cutting speeds, 147 Tool wear WEDM process Tool nose radius effects on finish hard turning, 259 Experimental study of wire electrical discharge machining of AISI Tooling DS tool steel, 362 CNC EDM of linear and circular contours using plate tools, White layer 196 Tool nose radius effects on finish hard turning, 259 Tooth undercutting Wood machining Computerized tooth profile generation and analysis of character- Strains and cutting forces involved in the solid wood rotating istics of elliptical gears with circular-arc teeth, 226 cutting process, 220 Turbine blade Work roll Electromagnetic shaping and solidification control of Ni-base Changing the geometry of water spray on milling work roll and its superalloys under vacuum, 25 effect on work roll temperature, 35 Filling system for investment cast Ni-base turbine blades, Workability 310 An investigation into the forming limits of sintered porous materials TWB under different operational conditions, 382 Neutron diffraction residual stress mapping in same gauge and Wrinkling differential gauge tailor-welded blanks, 177 Unified failure analysis for tubular hydroforming, 269 V-bending Zn-Al alloys Finite element analysis of spring-back of V-bending sheet metal Processing of eutectic Zn—5% Al alloy by equal-channel angular forming processes, 15 pressing, 279