Table Of Content

Journal of Materials Processing ge Technology ELSEEVV IER Journal of Materials Processing Technology 140 (2003) 717-718 www.elsevier.com/locate/jmatprotec Author Index of Volume 140 Aoki, T., 13 Haga, T., 610 Kao, Y.-C., 116 Azhari, C.H., 694 Hahn, T.H., 185 Katayama, I., 157 Han, B.S., 641 Kawai, K., 500 Bhattacharayya, B., 711 Han, H., 303 Khoo, H.H., 326 Bhattacharyya, B., 287 Han, Y.W., 465 Khor, K.A., 420 Boey, F.Y.C., 413 Hatanaka, N., 628 Kiet Tieu, A., 569 Byon, S.M., 84 Hayashi, M., 30 Kim, H.S., 110, 401, 465 Hino, R., 494 Kim, I.J., 676 Chan, C.C., 358 Ho, C.Y., 260 Kim, I.K., 676 Chan, K.C., 141 Hocheng, H., 255, 264, 335 Kim, I.S., 676 Chang, J.-E., 237 Hou, C.C., 179 Kim, J.Y., 676 Chang, S.L., 100 Hsiang, S.-H., 6 Kim, N., 478 Hsiao, P.-Y., 520 Kim, S.1., 84 Chang, T.-C., 588 Hsieh, J.H., 662 Kim, S.W., 231 Cheang, P., 420 Chen, C.-C., 653 Hsu, C.C., 298 Kim, S.Y., 36 Chen, C.-C.A., 373 Hsu, C.-S., 332 Kim, Y.-H., 447 Hsu, H.-H., 604 Kiuchi, M., 163 Chen, C.-H., 248 Chen, F.-K., 129 Hsu, Q.C., 363 Ko, S.-L., 237 Chen, R.-H., 173 Hsu, T.-C., 49 Ko, Y., 478 Chen, S.L., 363 Hu, N.S., 152 Komiya, S., 705 Chen, T.-C., 432 Huang, C.A., 298 Ku, T.W., 65 Chen, W.K., 217 Huang, C.-C., 49, 505 Kudo, H., 500 Chen, Y.C., 269 Huang, C.-H., 688 Kumagaya, S., 13 Chen, Y.-L., 203 Huang, H., 217 Kumar, R., 420 Huang, M.N., 598 Kuo, H.H., 298 Chen, Y.-P., 688 Chen, Z.D., 460 Huang, M.-N., 622 Kuo, J.-L., 6 Huang, Y.-M., 191, 432 Kuriyama, S., 13 Cheon, J.S., 36 Cheung, C.F., 141, 211, 292, 346 Huh, H., 185, 616 Kwan, C.-T., 530 Chien, W.-T., 340 Hung, C., 173 Kwon, H.C., 471, 487 Chin, B.A., 668 Hung, C.-H., 30 Kwong, C.K., 147 Chiu, L.C., 136 Hung, J.-C., 30 Chiu, Y.Y., 136, 179 Hwang, Y.M., 426 Lai, J.-J., 206 Choi, K.H., 231 Lay, H.S., 426 Ibrahim, R., 397 Lee, C.M., 231 Choy, C.M., 460 lizuka, T., 407, 628 Lee, D.W., 231 Chueh, Y.C., 90 Chung, S.-W., 385 Ikawa, M., 610 Lee, H.S., 100 Im, Y.T., 36, 110, 465, 471, 487 Lee, J., 478 Imai, K., 379 Lee, J.W., 487 D’ Alessio, G., 562 Ip, K.W., 147 Lee, R.S., 43 Dohda, K., 514, 548 Lee, S., 583, 588 Du, M.-F., 280 Jeng, J.-Y., 191 Lee, S.-J., 203, 206, 280, 454, 688 Jeong, Y.-H., 548 Lee, S.-R., 373 Edwin Lee, M.K., 318 Jeong, Y.J., 676 Lee, W.B., 141, 211, 292, 346 Jiang, C.-P., 191 Lee, Y., 84, 471 Fan, H., 668 Jiang, Z., 76, 569 Lee, Y.-M., 280 Fann, K.-J., 520 Jiang, Z.Y., 123, 535, 542, 635 Li, C., 662 Fereshteh-Saniee, F., 555 Jin, M., 30 Ls, in SO Fuh, J.Y.H., 314, 368, 460 Jou, J.L., 43 Li, C.T., 167 Fukuzawa, Y., 157, 245 Li, J.G., 211 Kanayama, K., 407 Li, X.P., 308, 326, 352, 358 Gao, D., 211 Kang, B.S., 65 Liao, Y.S., 136, 179, 269, 274 Gotoh, M., 59 Kang, B.-S., 592 Lim, H.S., 303, 318 Guo, Y., 509 Kang, G.-J., 592 Lin, C.-R., 173 Guo, Y.-M., 19 Kao, P.S., 255, 264 Lin, F.C., 54 Elsevier B.V. doi: 10.1016/S0924-0136(03)00889-6 718 Author Index of Volume 140 Lin, J.-C., 197 Rahman, M., 303, 308, 318, 326, Tu, Y., 509 Lin, J.-J., 95 352, 358 Tzou, G.Y., 598 Lin, S.C., 264 Ravala, N.K., 668 Tzou, G.-Y., 604, 622 Lin, S.Y., 54 Ravi, N., 303 Lin, Y.C., 682 Rhee, M.H., 487 Uemori, T., 494 Lin, Y.-Y., 646 Lin, Z.-C., 653 Saiki, H., 25 Wakui, H., 705 Liu, C.-H., 576 Saotome, Y., 379 Wang, D.D., 562 Liu, J., 505 Sawa, M., 308, 326 Wang, G.D., 123 Liu, K., 352, 358 Sawada, T., 525 Wang, J.C., 203 Liu, Y., 509 Sawairi, Y., 59 Wang, J.P., 90 Lo, S.-P., 646 Sawanobori, N., 379 Wang, J.-Y., 588 Lo, Y.-L., 700 Sha, C.-K., 197 Wang, S.W., 682 Loh, H.T., 105, 368 Shen, X., 505 Wang, X., 368, 505 Lu, C., 76, 542, 562, 569, 635 Shiou, F.-J., 248 Wang, Z., 514, 548 Lu, J.K., 260 Showa, K., 385 Watari, H., 610 Lu, L., 314, 368, 460 Shu, L.-S., 373 Weng, F.-T., 332 Lu, Y.-H., 576 Shyu, R.F., 332 Wikle III, H.C., 668 Sidik, M.I., 397 Wong, Y.S., 105, 303, 318, 368, Ma, B., 635 Sogabe, M., 705 460 Maeda, Y., 308, 326 Son, I.H., 465 Wong, Y.W., 147 Manna, A., 711 Son, I.J., 676 Woo, J.S., 471 Marumo, Y., 25 Son, J.S., 110 Wu, M.-T., 576 Matsumoto, N., 705 Sugiyama, S., 163 Wu, W., 662 Miki, T., 407 Sun, J., 509 Wu, Y.-E., 700 Min, J.H., 471 Sun, W., 76 Wu, Y.F., 105 Miyauchi, K., 13 Sun, W.H., 542 Mohamad, M., 397 Sun, Y.H., 264 Xing, F., 509 Mohri, N., 245 Syu, S.W., 598 Montazeran, M.H., 555 Yamada, Y., | Moon, B.-Y., 385, 592 Takahashi, K., 610 Yamaguchi, K., 407, 628 Muchtar, A., 694 Takahashi, T., 13 Yamaguchi, T., 157 Munda, J., 287 Takakura, N., 407, 628 Yamashita, M., 59 Murakawa, M., 30 Takiguchi, M., 441 Yanagimoto, J., 163 Mustapha, M., 397 Talib, R.J., 694 Yang, C., 185 Muttamara, A., 245 Tan, A.L.K., 662 Yang, G.-E., 237 Myint, M.H., 460 Tanabe, M., 705 Yang, L.J., 391 Tang, Y., 368 Yang, Y.-L., 583 Nagasawa, S., 157 Tani, T., 245 Yaragada, P.K.D.V., 676 Naka, T., 494 Tatsuki, Y., 500 Yea, Y., 478 Nakamura, T., 514 Thipprakmas, S., 30 Yeh, F.-H., 576 Nakanishi, K., 19 Thiruvarudchelvan, S., 70 Yoon, J.H., 616 Nakayama, Y., 494 Tieu, A.K., 76, 123, 535, 542, Yoshida, F., 441, 494 Neo, K.S., 308, 326, 358 562, 635 Yoshida, Y., 13 Nguyen, T., 224 To, S., 292, 346 Yuen, W.Y.D., 562 Tok, A.LY., 413 O, C.-M., 588 Tong, Q., 509 Zarudi, I., 641 Obika, T., 514 Travis, F.W., 70 Zhang, L.C., 152, 224 Ohta, T., 525 Tsai, C.-E., 129 Zhang, X.M., 542 Okuda, H., 705 Tsai, C.-S., 340 Zhang, Y.F., 105 Omar, M.A., 397 Tsai, H.-L., 197 Zhou, L., 509 Tsai, Y.-C., 30 Zhu, H., 76 Park, J.-J., 447, 454 Tsai, Y.Y., 682 Zhu, H.H., 314 Peng, W.Y., 274 Tsao, C.C., 335 Zhu, H.T., 123, 535 Pramanik, A., 308 Tsukatani, S., 157 Zhu, S.-M., 203 Journal of Materials Processing uf + ~s Technology ELSEVIER Journal of Materials Processing Technology 140 (2003) 719-730 www.elsevier.com/locate/jmatprotec Subject Index of Volume 140 AA7075 aluminum alloys ANOVA Applying liquid film protection method to solid-state bonding An investigation on the hot extrusion process of magnesium alloy process of AA7075 aluminum alloys, 700 sheet, 6 ACLN Aspect ratio Neural network approach to recognize the grid patterns in experi- Three-dimensional finite element mesh generation from measured mental mechanics, 90 data of a stamping die, 129 Adaptive slicing Average contact pressure An adaptive slicing approach to modelling cloud data for rapid FEM analysis of contact mechanism in press-forming of lubricant prototyping, 105 pre-coated steel sheet, 514 Adaptive-network-based inference system Axial crush Study of ductile fracture and preform design of upsetting Axial crush of hollow cylindrical structures with various poly- process using adaptive network fuzzy inference system, gonal cross-sections. Numerical simulation and experiment, 576 59 Adhesive joints Analysis of plastic bending of adhesive-bonded sheet metals taking Back pressure account of viscoplasticity of adhesive, 441 Finite element modeling for chemical mechanical polishing process AISI 4140 steel under different back pressures, 646 Study on constitutive relation of AISI 4140 steel subject to large Ball end milling strain at elevated temperatures, 84 Evaluation of cutter orientations in high-speed ball end milling of Al/SiC-MMC cantilever-shaped thin plate, 231 A study on machinability of Al/SiC-MMC, 711 Ball-burnishing process Al-—Mg alloy sheet Freeform surface finish of plastic injection mold by using ball- Effects of temperature on yield locus for 5083 aluminum alloy burnishing process, 248 sheet, 494 Base isolation Alumina Hole and lead plug effect on fiber reinforced elastomeric isolator for A closed form solution for laser drilling of silicon nitride and seismic isolation, 592 alumina ceramics, 260 Bead geometry Aluminium alloy Sensitivity analysis for process parameters influencing weld quality The effect of casting temperature on the properties of squeeze cast in robotic GMA welding process, 676 aluminium and zinc alloys, 391 Bending Aluminium nitride Effect of crease depth and crease deviation on folding deformation Porous AIN ceramic substrates by reaction sintering, 413 characteristics of coated paperboard, 157 Aluminum Bending rigidity Fundamental studies on the incremental sheet metal forming tech- Determination of forming limit of a structural aluminum tube in nique, 447 rubber pad bending, 487 Analysis of variation (ANOVA) Bezier and B-spline surfaces Freeform surface finish of plastic injection mold by using ball- Three-dimensional finite element mesh generation from measured burnishing process, 248 data of a stamping die, 129 Analytic Biaxial tensile test Preventing non-uniform shrinkage in open-die hot embossing of Effects of temperature on yield locus for 5083 aluminum alloy PMMA microstructures, 173 sheet, 494 Analytical methods Blanking A comparative estimation of the forming load in the deep drawing Simulation of sheared edge formation process in blanking of sheet process, 555 metals, 628 Analytical model Bonding point Analytical model for prediction of deformed shape in three-roll Analytical modified model of the cold bond rolling of rolling process, 471 unbounded double-layers sheet considering hybrid friction, Anode profile 622 A material removal analysis of electrochemical machining using BPNN flat-end cathode, 264 Neural network approach to recognize the grid patterns in experi- Anodic polarization curve mental mechanics, 90 The surface characteristics of P/M high-speed steel (ASP 23) Bridge-LOM multi-cut with wire electrical discharge machine (WEDM), Automatic fabrication for bridged laminated object manufacturing 298 (LOM) process, 179 Elsevier B.V. doi: 10.1016/S0924-0136(03)00890-2 720 Subject Index of Volume 140 Buckling Color calibration Effect of crease depth and crease deviation on folding deformation Neural network approach to recognize the grid patterns in experi- characteristics of coated paperboard, 157 mental mechanics, 90 Built-up edge Combined technology A study on machinability of Al/SiC-MMC, 711 The technology combined electrochemical mechanical polishing, Bulk metal forming 203 Three-dimensional bulk metal forming simulations under a PC Composite materials cluster environment, 36 Numerical and experimental study on the gravitation and surface Burnish length tension effects on flow injection in center-gated disks, 167 Simulation of sheared edge formation process in blanking of sheet Evaluation of effective material properties of composite materials metals, 628 using special FEM, 185 Burr height Compression Simulation of sheared edge formation process in blanking of sheet Two analytical models of double-layer clad sheet compression metals, 628 forming based on the upper bound and the slab methods, 604 Burr minimization Compression test Burr minimizing scheme in drilling, 237 Study on constitutive relation of AISI 4140 steel subject to large strain at elevated temperatures, 84 CAD/CAE/CAM Conceptual design Development of a CAD/CAE/CAM system for a robot manipulator, Constructing an intelligent conceptual design system using genetic 100 algorithm, 95 Camber Conjugate gradient method An elasto-plastic finite-element analysis of sheet metal camber Optimization of loading conditions for tube hydroforming, 520 process, 432 Constitutive equation Candle stick drill Study on constitutive relation of AISI 4140 steel subject to large Comprehensive analysis of delamination in drilling of composite strain at elevated temperatures, 84 materials with various drill bits, 335 Densification modelling for nanocrystalline metallic powders, Cantilever-shaped aluminum 401 Evaluation of cutter orientations in high-speed ball end milling of Analysis of plastic bending of adhesive-bonded sheet metals taking cantilever-shaped thin plate, 231 account of viscoplasticity of adhesive, 441 CBN Constrain-surface stereolithography Characteristics of high speed micro-cutting of tungsten carbide, Increased accuracy by using dynamic finite element method in the 352 constrain-surface stereolithography system, 191 Ceramics Contact area ratio Evaluation of wear mechanisms of Y-TZP and tungsten carbide FEM analysis of contact mechanism in press-forming of lubricant punches, 460 pre-coated steel sheet, 514 Chemical—mechanical polishing Contact pressure Mechano-chemical polishing of silicon wafers, 373 Influence of the roughness geometry of tool surface and the flow Finite element modeling for chemical mechanical polishing process stress of coated solid lubricants on tribo-conditions in cold under different back pressures, 646 forging, 25 Cladding Control The effects of various ceramic—metal on wear performance of clad Low-cost infrared sensing system for monitoring the welding layer, 682 process in the presence of plate inclination angle, 668 Cloisonné Conventional drill Application of mushy/semi-solid joining—Part 3, 163 Burr minimizing scheme in drilling, 237 Cloud data Copper An adaptive slicing approach to modelling cloud data for rapid Densification modelling for nanocrystalline metallic powders, prototyping, 105 401 CO, laser alloying Copper-based alloy The impact characteristics of Ti-6Al-4V plates hardfacing by laser Development and characterisation of direct laser sintering Cu-based alloying NiAl + ZrO, powder, 197 metal powder, 314 Cold air Direct laser sintering of a copper-based alloy for creating three- An assessment of the applicability of cold air and oil mist in surface dimensional metal parts, 368 grinding, 224 Core drill Cold forging Comprehensive analysis of delamination in drilling of composite Influence of the roughness geometry of tool surface and the flow materials with various drill bits, 335 stress of coated solid lubricants on tribo-conditions in cold Corrosion resistance forging, 25 Investigation of PVD coating on corrosion resistance of metallic Cold rolling bipolar plates in PEM fuel cell, 688 Experiment investigation of deep-drawing sheet texture evolution, Coulomb friction 509 Analytical modified model of the cold bond rolling of unbounded Modeling and optimization of threading process for shape control in double-layers sheet considering hybrid friction, 622 tandem cold rolling, 562 Crush strength Modeling of the inlet zone in the mixed lubrication situation of cold Axial crush of hollow cylindrical structures with various polygonal strip rolling, 569 cross-sections. Numerical simulation and experiment, 59 Cold rolling of thin strip Crystallographic orientation Effect of rolling parameters on cold rolling of thin strip during work A mesoplasticitiy analysis of cutting friction in ultra-precision roll edge contact, 535 machining, 292 Subject Index of Volume 140 Cubic boron nitride (CBN) Design of isolator Performance evaluation of pure CBN tools for machining of steel, Hole and lead plug effect on fiber reinforced elastomeric isolator for 326 seismic isolation, 592 Cup drawing D-I can Hydraulic-pressure-enhanced cup-drawing processes—an apprai- Development of simulation code for calculating residual stress sal, 70 distribution in D-I cans produced by both-sided ironing process, Cup wheel 13 Ultra precision grinding of spherical convex surfaces on combina- Diamond tool tion brittle materials using resin and metal bond cup wheels, 217 Nano-precision measurement of diamond tool edge radius for wafer Current off time fabrication, 358 Study of electrical discharge machining technology for slicing Diamond turning silicon ingots, 274 An NC tool path translator for virtual machining of precision optical Current on time products, 211 Study of electrical discharge machining technology for slicing Cutting performance of diamond tools during ultra-precision turn- silicon ingots, 274 ing of electroless-nickel plated die materials, 308 I-V curves Die life The polishing mechanism of electrochemical mechanical polishing Application of numerical simulation for wear analysis of warm technology, 280 forging die, 43 Cutter orientation Dielectric constant Evaluation of cutter orientations in high-speed ball end milling of Porous AIN ceramic substrates by reaction sintering, 413 cantilever-shaped thin plate, 231 Direct laser sintering Cutting dynamics Development and characterisation of direct laser sintering Cu-based Surface characterization in ultra-precision machining of Al/SiC metal powder, 314 metal matrix composites using data dependent systems analysis, Direct laser sintering of a copper-based alloy for creating three- 141 dimensional metal parts, 368 Cutting force Discharge energy A mesoplasticitiy analysis of cutting friction in ultra-precision Investigation of micro-EDM material removal characteristics using machining, 292 single RC-pulse discharges, 303 A study on machinability of Al/SiC-MMC, 711 Dislocation model Densification modelling for nanocrystalline metallic powders, 3D finite element mesh generation 401 Three-dimensional finite element mesh generation from measured Distorted element data of a stamping die, 129 Efficiency enhancement in sheet metal forming analysis with a 3D metal part mesh regularization method, 616 Direct laser sintering of a copper-based alloy for creating three- Double passes dimensional metal parts, 368 Finite element analysis of strain conditions after equal channel Data dependent systems analysis angular extrusion, 583 Surface characterization in ultra-precision machining of Al/SiC Double-layer clad sheet metal matrix composites using data dependent systems analysis, Two analytical models of double-layer clad sheet compression 141 forming based on the upper bound and the slab methods, 604 Debinding Drawing force Rapid debinding of 316L stainless steel injection moulded compo- Simulation of ultrasonic-vibration drawing using the finite element nent, 397 method (FEM), 30 Deep drawing Drilling Development of simulation code for calculating residual stress dis- Burr minimizing scheme in drilling, 237 tribution in D-I cans produced by both-sided ironing process, 13 Study on wear mechanisms in drilling of Inconel 718 superalloy, Hydraulic-pressure-enhanced cup-drawing processes—an appraisal, 269 70 Comprehensive analysis of delamination in drilling of composite A comparative estimation of the forming load in the deep drawing materials with various drill bits, 335 process, 555 Deep-drawing sheet ECAE Experiment investigation of deep-drawing sheet texture evolution, Finite element analysis of strain conditions after equal channel 509 angular extrusion, 583 Deformation mechanism Eccentric tube nosing process Deformation and material removal rate in polishing silicon wafers, An analysis of the eccentric nosing process of metal tubes, 530 641 ECM Deformation mode Optimization of electrochemical polishing of stainless steel by grey Study on constitutive relation of AISI 4140 steel subject to large relational analysis, 255 strain at elevated temperatures, 84 Edge radius Delamination Nano-precision measurement of diamond tool edge radius for wafer Effect of crease depth and crease deviation on folding deformation fabrication, 358 characteristics of coated paperboard, 157 Effective material property Comprehensive analysis of delamination in drilling of composite Evaluation of effective material properties of composite materials materials with various drill bits, 335 using special FEM, 185 Denavit—Hartenberg coordinate transformation Efficiency Development of aCAD/CAE/CAM system for a robot manipulator, Investigation of micro-EDM material removal characteristics using 100 single RC-pulse discharges, 303 722 Subject Index of Volume 140 Elastic deformation Extrusion Modeling of the inlet zone in the mixed lubrication situation of cold The friction modeling of different tribological interfaces in extru- strip rolling, 569 sion process, 49 Elastic—plastic material Development of simulation code for calculating residual stress FEM distribution in D-I cans produced by both-sided ironing process, FEM analysis of contact mechanism in press-forming of lubricant 13 pre-coated steel sheet, 514 Elastohydrodynamic lubrication Finite element analysis of strain conditions after equal channel Simulation of solidification of lubricant in metal forming, 525 angular extrusion, 583 Elasto-plastic Fiber reinforced elastomeric isolator An elasto-plastic finite-element analysis of sheet metal camber Hole and lead plug effect on fiber reinforced elastomeric isolator for process, 432 seismic isolation, 592 Elasto-plastic finite element Fine-grained microstructure Study of ductile fracture and preform design of upsetting process Finite element analysis of strain conditions after equal channel using adaptive network fuzzy inference system, 576 angular extrusion, 583 Electrical discharge machining Finite element analysis Probability of precision micro-machining of insulating Si,N, cera- Increased accuracy by using dynamic finite element method in the mics by EDM, 245 constrain-surface stereolithography system, 191 Electric-discharge machining Densification modelling for nanocrystalline metallic powders, Studies on electric-discharge machining of non-contact seal face 401 grooves, 363 Study on superplastic blow-forming in a rectangular closed-die, Electrochemical machining 426 A material removal analysis of electrochemical machining using Design of rolling pass schedules to improve grain-size uniformity in flat-end cathode, 264 thickness, 454 Experimental investigation into electrochemical micromachining Efficiency enhancement in sheet metal forming analysis with a (EMM) process, 287 mesh regularization method, 616 Electrochemical mechanical polishing Finite element method (FEM) The polishing mechanism of electrochemical mechanical polishing Development of simulation code for calculating residual stress technology, 280 distribution in D-I cans produced by both-sided ironing process, Electrochemical polishing 13 The technology combined electrochemical mechanical polishing, Simulation of ultrasonic-vibration drawing using the finite element 203 method (FEM), 30 Electrochemical polishing mechanism FE approach and experiments for an axisymmetric micro-yoke part The polishing mechanism of electrochemical mechanical polishing forming using grain element and grain boundary element, 65 technology, 280 Numerical and experimental study on the gravitation and surface Electro-discharge machining tension effects on flow injection in center-gated disks, 167 A study on the machining of high-aspect ratio micro-structures Modified looping technique for remeshing of forming simulations using micro-EDM, 318 with free surface folding, 465 Electroless-nickel Optimization of loading conditions for tube hydroforming, 520 Cutting performance of diamond tools during ultra-precision turn- Simulation of solidification of lubricant in metal forming, 525 ing of electroless-nickel plated die materials, 308 An analysis of the eccentric nosing process of metal tubes, 530 Electropolishing Simulation of sheared edge formation process in blanking of sheet Optimization of electrochemical polishing of stainless steel by grey metals, 628 relational analysis, 255 Finite element modeling for chemical mechanical polishing process Electropolishing (EP) under different back pressures, 646 The effects of electropolishing (EP) process parameters on corro- Finite-element modeling sion resistance of 316L stainless steel, 206 Comparison of asperity flattening under different wavelength mod- Empirical mode els for sheet metal forming, 635 Sensitivity analysis for process parameters influencing weld quality Finite-element simulation in robotic GMA welding process, 676 A comparative estimation of the forming load in the deep drawing Enamel process, 555 Application of mushy/semi-solid joining—Part 3, 163 Flatness Evaluation mechanism A fuzzy algorithm for flatness control in hot strip mill, 123 Constructing an intelligent conceptual design system using genetic Flow front algorithm, 95 Numerical and experimental study on the gravitation and surface Experimental strain analysis tension effects on flow injection in center-gated disks, 167 Analysis of plastic bending of adhesive-bonded sheet metals taking Foam account of viscoplasticity of adhesive, 441 Porous AIN ceramic substrates by reaction sintering, 413 Expert system Formability Development of an applied roll forming pass design expert system Fundamental studies on the incremental sheet metal forming tech- based on the shape element idea, 505 nique, 447 Explicit formulation Forming Deformation and material removal rate in polishing silicon wafers, A backward extrusion analysis by the rigid—plastic integralless— 641 meshless method, 19 Extruded aluminum tube Forming limit Determination of forming limit of a structural aluminum tube in Determination of forming limit of a structural aluminum tube in rubber pad bending, 487 rubber pad bending, 487 Subject Index of Volume 140 Forming limit curve Grain boundary element Fundamental studies on the incremental sheet metal forming tech- FE approach and experiments for an axisymmetric micro-yoke part nique, 447 forming using grain element and grain boundary element, 65 Forming simulation Grain element An analysis of the eccentric nosing process of metal tubes, 530 FE approach and experiments for an axisymmetric micro-yoke part Fracture toughness forming using grain element and grain boundary element, 65 Spark plasma sintering and in vitro study of ultra-fine HA and Grain size ZrO.—HA powders, 420 Design of rolling pass schedules to improve grain-size uniformity in Free surface folding thickness, 454 Modified looping technique for remeshing of forming simulations Gravitation with free surface folding, 465 Numerical and experimental study on the gravitation and surface Friction tension effects on flow injection in center-gated disks, 167 A mesoplasticitiy analysis of cutting friction in ultra-precision Gravity casting machining, 292 The effect of casting temperature on the properties of squeeze cast Comparison of asperity flattening under different wavelength mod- aluminium and zinc alloys, 391 els for sheet metal forming, 635 Grey relational analysis Friction coefficient Optimization of electrochemical polishing of stainless steel by grey FEM analysis of contact mechanism in press-forming of lubricant relational analysis, 255 pre-coated steel sheet, 514 Grinding Lubricity of volatile lubricants in sheet metal rolling, 548 A study on the grindability of multidirectional carbon fibre-rein- Friction materials forced plastics, 152 Microstructural characteristics on the surface and subsurface of Grinding force semimetallic automotive friction materials during braking pro- A study on the grindability of multidirectional carbon fibre-rein- cess, 694 forced plastics, 152 Friction modeling An assessment of the applicability of cold air and oil mist in surface The friction modeling of different tribological interfaces in extru- grinding, 224 sion process, 49 Groove indentation Friction variation Effect of crease depth and crease deviation on folding deformation Finite element simulation of cold rolling of thin strip, 542 characteristics of coated paperboard, 157 Frictional coefficient Influence of the roughness geometry of tool surface and the flow Hard coating stress of coated solid lubricants on tribo-conditions in cold Synthesis of Ti(C, N, O) coatings by unbalanced magnetron sput- forging, 25 tering, 662 Full film zone Hardfacing Modeling of the inlet zone in the mixed lubrication situation of cold The impact characteristics of Ti-6AI-4V plates hardfacing by laser strip rolling, 569 alloying NiAl + ZrO. powder, 197 Fuzzy control Hardness A fuzzy algorithm for flatness control in hot strip mill, 123 An assessment of the applicability of cold air and oil mist in surface Fuzzy regression grinding, 224 Fuzzy regression approach to modelling transfer moulding for Hesitation effect microchip encapsulation, 147 Gate location design in injection molding of an automobile junction box with integral hinges, 110 Gap High speed A material removal analysis of electrochemical machining using Characteristics of high speed micro-cutting of tungsten carbide, 352 flat-end cathode, 264 High-aspect ratio Gas tungsten arc welding A study on the machining of high-aspect ratio micro-structures The effects of various ceramic—metal on wear performance of clad using micro-EDM, 318 layer, 682 High-speed steel Gate location design The surface characteristics of P/M high-speed steel (ASP 23) multi- Gate location design in injection molding of an automobile junction cut with wire electrical discharge machine (WEDM), 298 box with integral hinges, 110 Hollow cylindrical structure Genetic algorithm Axial crush of hollow cylindrical structures with various polygonal Constructing an intelligent conceptual design system using genetic cross-sections. Numerical simulation and experiment, 59 algorithm, 95 Hot embossing Modeling and optimization of threading process for shape control in Preventing non-uniform shrinkage in open-die hot embossing of tandem cold rolling, 562 PMMA microstructures, 173 Geometrical conditions Hot extrusion Influences of the geometrical conditions of die and workpiece An investigation on the hot extrusion process of magnesium alloy on the barreling formation during forging—extrusion process, sheet, 6 54 Hot rolling Glass Surface characteristics of oxide scale in hot strip rolling, 76 Microformability of optical glasses for precision molding, 379 Design of rolling pass schedules to improve grain-size uniformity in Glass/meal joining thickness, 454 Application of mushy/semi-solid joining—Part 3, 163 Experiment investigation of deep-drawing sheet texture evolution, GMA welding process 509 Sensitivity analysis for process parameters influencing weld quality Hot strip mill in robotic GMA welding process, 676 A fuzzy algorithm for flatness control in hot strip mill, 123 724 Subject Index of Volume 140 Hybrid friction KeMulti-EDM grinding process Analytical modified model of the cold bond rolling of unbounded Fabrication of micro-electrodes by multi-EDM grinding process, 332 double-layers sheet considering hybrid friction, 622 Hydraulic-pressure-aided drawing 316L stainless steel Hydraulic-pressure-enhanced cup-drawing processes—an apprai- The effects of electropolishing (EP) process parameters on corro- sal, 70 sion resistance of 316L stainless steel, 206 Hydrodynamic inlet Laminated object manufacturing (LOM) Modeling of the inlet zone in the mixed lubrication situation of cold Automatic fabrication for bridged laminated object manufacturing strip rolling, 569 (LOM) process, 179 Hydroforming Laser burr measurement Hydraulic-pressure-enhanced cup-drawing processes—an apprai- Burr minimizing scheme in drilling, 237 sal, 70 Laser drilling Hydromechanical forming A closed form solution for laser drilling of silicon nitride and Hydraulic-pressure-enhanced cup-drawing processes—an apprai- alumina ceramics, 260 sal, 70 Layer manufacturing Hydroxyapatite A new approach of online waste removal process for laminated Spark plasma sintering and in vitro study of ultra-fine HA and object manufacturing (LOM), 136 ZrO.—HA powders, 420 Limit frictional coefficient Investigation on comparisons between two analytical models of IC packaging sandwich sheet rolling bonded before rolling, 598 The application of the moment equilibrium model to the offset of Liquid film protection (LFP) pressure center of trimming progressive die in IC packaging Applying liquid film protection method to solid-state bonding machine, 653 process of AA7075 aluminum alloys, 700 Impact vibration Liquid-phase sintering The impact characteristics of Ti-6Al4V plates hardfacing by laser Development and characterisation of direct laser sintering Cu-based alloying NiAl + ZrO» powder, 197 metal powder, 314 In vitro testing Localized corrosion (IGC) Spark plasma sintering and in vitro study of ultra-fine HA and The effects of electropolishing (EP) process parameters on corro- ZrO.—HA powders, 420 sion resistance of 316L stainless steel, 206 Inconel 718 LOM Study on wear mechanisms in drilling of Inconel 718 superalloy, A new approach of online waste removal process for laminated 269 object manufacturing (LOM), 136 Incremental forming Long rods Fundamental studies on the incremental sheet metal forming tech- Production of long rods by sequential extrusion of wood powders, nique, 447 407 Influence function method Low superheat casting Effect of rolling parameters on cold rolling of thin strip during work A vertical-type twin roll caster for aluminum alloy strips, 610 roll edge contact, 535 Lubricant pre-coated steel sheet Infrared sensing FEM analysis of contact mechanism in press-forming of lubricant Low-cost infrared sensing system for monitoring the welding pre-coated steel sheet, 514 process in the presence of plate inclination angle, 668 Lubrication Injection molding An assessment of the applicability of cold air and oil mist in surface Gate location design in injection molding of an automobile junction grinding, 224 box with integral hinges, 110 Lubricity of volatile lubricants in sheet metal rolling, 548 Injection moulding Lyophobic fluid Development and characterisation of direct laser sintering Cu-based Mechanical properties study and design of a suspension system by metal powder, 314 considering tension force, 385 Insulating ceramic Probability of precision micro-machining of insulating Si;N, cera- Magnesium alloy AZ31 mics by EDM, 245 Grain refining of magnesium alloy AZ31 by rolling, 588 Integral hinge Magnesium alloy sheet Gate location design in injection molding of an automobile junction An investigation on the hot extrusion process of magnesium alloy box with integral hinges, 110 sheet, 6 Integralless method Magnetron sputtering A backward extrusion analysis by the rigid—plastic integralless— Synthesis of Ti(C, N, O) coatings by unbalanced magnetron sput- meshless method, 19 tering, 662 Interaction between wheel and rail Material removal Computational model of a Shinkansen train running on the railway A material removal analysis of electrochemical machining using structure and the industrial applications, 705 flat-end cathode, 264 Ironing Deformation and material removal rate in polishing silicon wafers, Development of simulation code for calculating residual stress 641 distribution in D-I cans produced by both-sided ironing process, Material removal mechanism 13 Investigation of micro-EDM material removal characteristics using single RC-pulse discharges, 303 Junction box Measured data Gate location design in injection molding of an automobile junction Three-dimensional finite element mesh generation from measured box with integral hinges, 110 data of a stamping die, 129 Subject Index of Volume 140 Measurement Microstructural characteristics on the surface and subsurface of Nano-precision measurement of diamond tool edge radius for wafer semimetallic automotive friction materials during braking pro- fabrication, 358 cess, 694 Mechanical polishing Microvoid The technology combined electrochemical mechanical polishing, Microstructural characteristics on the surface and subsurface of 203 semimetallic automotive friction materials during braking pro- Mechanical properties cess, 694 The effect of casting temperature on the properties of squeeze cast Micro-yoke part aluminium and zinc alloys, 391 FE approach and experiments for an axisymmetric micro-yoke part Mechano-chemical polishing forming using grain element and grain boundary element, 65 Mechano-chemical polishing of silicon wafers, 373 Mill setup MEMS Modeling and optimization of threading process for shape control in Microformability of optical glasses for precision molding, 379 tandem cold rolling, 562 Mesh regularization Milli-structure forming Efficiency enhancement in sheet metal forming analysis with a FE approach and experiments for an axisymmetric micro-yoke part mesh regularization method, 616 forming using grain element and grain boundary element, 65 Meshless method Miniaturization A backward extrusion analysis by the rigid—plastic integralless— FE approach and experiments for an axisymmetric micro-yoke meshless method, 19 part forming using grain element and grain boundary element, Mesoplasticity 65 A mesoplasticitiy analysis of cutting friction in ultra-precision Mixed film regime machining, 292 Modeling of the inlet zone in the mixed lubrication situation of cold Metal extrusion strip rolling, 569 Development of a remote quick CAE system on sculptured metal Model extrusion die surface, 116 The investigation on the prediction of tool wear and the determina- Metal forming tion of optimum cutting conditions in machining 17-4PH stain- Rotary straightening of curved shape near both ends of seamless less steel, 340 pipe, 500 Modelling Metal injection moulding Investigation of micro-EDM material removal characteristics using Rapid debinding of 316L stainless steel injection moulded compo- single RC-pulse discharges, 303 nent, 397 Finite element simulation of cold rolling of thin strip, 542 Metal matrix composites Modified looping technique Surface characterization in ultra-precision machining of Al/SiC Modified looping technique for remeshing of forming simulations metal matrix composites using data dependent systems analysis, with free surface folding, 465 141 Moisture content Metallic bipolar plates Production of long rods by sequential extrusion of wood powders, Investigation of PVD coating on corrosion resistance of metallic 407 bipolar plates in PEM fuel cell, 688 Mold cavity Microchip encapsulation Freeform surface finish of plastic injection mold by using ball- Fuzzy regression approach to modelling transfer moulding for burnishing process, 248 microchip encapsulation, 147 Moment equilibrium principle Microcrack The application of the moment equilibrium model to the offset of Microstructural characteristics on the surface and subsurface of pressure center of trimming progressive die in IC packaging semimetallic automotive friction materials during braking pro- machine, 653 cess, 694 Multidirectional CFRP composites Micro-cutting A study on the grindability of multidirectional carbon fibre-rein- Characteristics of high speed micro-cutting of tungsten carbide, 352 forced plastics, 152 Micro-EDM Multi-pass bar rolling Investigation of micro-EDM material removal characteristics using Analytical model for prediction of deformed shape in three-roll single RC-pulse discharges, 303 rolling process, 471 A study on the machining of high-aspect ratio micro-structures Multi-speed method using micro-EDM, 318 An investigation on the hot extrusion process of magnesium alloy Micro-electrode sheet, 6 Probability of precision micro-machining of insulating Si;N, cera- Mushy processing mics by EDM, 245 Application of mushy/semi-solid joining—Part 3, 163 Fabrication of micro-electrodes by multi-EDM grinding process, 332 Nano-composites Micromachining Spark plasma sintering and in vitro study of ultra-fine HA and Experimental investigation into electrochemical micromachining ZrO2.—-HA powders, 420 (EMM) process, 287 Nano-forming Micro-nozzles Microformability of optical glasses for precision molding, 379 Fabrication of micro-electrodes by multi-EDM grinding process, 332 Nano-precision Microspheres Nano-precision measurement of diamond tool edge radius for wafer Porous AIN ceramic substrates by reaction sintering, 413 fabrication, 358 Microstructure NC tool path A study on the machining of high-aspect ratio micro-structures An NC tool path translator for virtual machining of precision optical using micro-EDM, 318 products, 211 726 Subject Index of Volume 140 Neural network PID control A fuzzy algorithm for flatness control in hot strip mill, 123 A fuzzy algorithm for flatness control in hot strip mill, 123 Newtonian viscous flow Plane elasticity Microformability of optical glasses for precision molding, 379 Evaluation of effective material properties of composite materials Non-contact seal using special FEM, 185 Studies on electric-discharge machining of non-contact seal face Plane extrusion grooves, 363 Neural network approach to recognize the grid patterns in experi- Nonlinear dynamics mental mechanics, 90 Computational model of a Shinkansen train running on the railway Plastic bending structure and the industrial applications, 705 Analysis of plastic bending of adhesive-bonded sheet metals taking Nonuniformity account of viscoplasticity of adhesive, 441 Finite element modeling for chemical mechanical polishing process Plastic forming under different back pressures, 646 Lubricity of volatile lubricants in sheet metal rolling, 548 Numerical analysis Simulation of sheared edge formation process in blanking of sheet Analysis of plastic bending of adhesive-bonded sheet metals taking metals, 628 account of viscoplasticity of adhesive, 441 Plate inclination effects Numerical simulation Low-cost infrared sensing system for monitoring the welding Application of numerical simulation for wear analysis of warm process in the presence of plate inclination angle, 668 forging die, 43 Point angle NURBS Burr minimizing scheme in drilling, 237 Efficiency enhancement in sheet metal forming analysis with a Polygonal cross-section mesh regularization method, 616 Axial crush of hollow cylindrical structures with various polygonal cross-sections. Numerical simulation and experiment, 59 Online de-cubing Porous materials model A new approach of online waste removal process for laminated Densification modelling for nanocrystalline metallic powders, object manufacturing (LOM), 136 401 On-machine measurement Powder A study on the machining of high-aspect ratio micro-structures Mechanical properties study and design of a suspension system by using micro-EDM, 318 considering tension force, 385 Optical products Powder compaction An NC tool path translator for virtual machining of precision optical Densification modelling for nanocrystalline metallic powders, 401 products, 211 Power spectrum analysis Optimization A mesoplasticitiy analysis of cutting friction in ultra-precision The investigation on the prediction of tool wear and the determina- machining, 292 tion of optimum cutting conditions in machining 17-4PH stain- Precision engineering less steel, 340 Studies on electric-discharge machining of non-contact seal face Optimization of loading conditions for tube hydroforming, 520 grooves, 363 Orientation changes Prediction Orientation changes of aluminium single crystals in ultra-precision The investigation on the prediction of tool wear and the determina- diamond turning, 346 tion of optimum cutting conditions in machining 17-4PH stain- Orthotropy less steel, 340 Effect of crease depth and crease deviation on folding deformation Preform characteristics of coated paperboard, 157 Study of ductile fracture and preform design of upsetting process Oxide scales using adaptive network fuzzy inference system, 576 Surface characteristics of oxide scale in hot strip rolling, 76 Press bonding Applying liquid film protection method to solid-state bonding Parallel processing process of AA7075 aluminum alloys, 700 Three-dimensional bulk metal forming simulations under a PC Press-forming cluster environment, 36 FEM analysis of contact mechanism in press-forming of lubricant Pass design pre-coated steel sheet, 514 Development of an applied roll forming pass design expert system Pressure distribution based on the shape element idea, 505 Prediction of spread, pressure distribution and roll force in ring Passive film rolling process using rigid—plastic finite element method, The polishing mechanism of electrochemical mechanical polishing 478 technology, 280 Pressure spike Patch Simulation of solidification of lubricant in metal forming, 525 Efficiency enhancement in sheet metal forming analysis with a Process design mesh regularization method, 616 Design of rolling pass schedules to improve grain-size uniformity in Pattern recognition thickness, 454 Neural network approach to recognize the grid patterns in experi- Process modelling mental mechanics, 90 Fuzzy regression approach to modelling transfer moulding for PC cluster microchip encapsulation, 147 Three-dimensional bulk metal forming simulations under a PC Profile cluster environment, 36 Effect of rolling parameters on cold rolling of thin strip during work PEMFC roll edge contact, 535 Investigation of PVD coating on corrosion resistance of metallic Profile and flatness bipolar plates in PEM fuel cell, 688 Finite element simulation of cold rolling of thin strip, 542

ebook img

Journal of Materials Processing Technology 2003: Vol 140 Index PDF

14 Pages·2003·4.8 MB·English
by  
#periodicals #sim_microfilm #pub_journal-of-materials-processing-technology
Save to my drive
Quick download
Download
Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Journal of Materials Processing Technology 2003: Vol 140 Index

Journal of Materials Processing ge Technology ELSEEVV IER Journal of Materials Processing Technology 140 (2003) 717-718 www.elsevier.com/locate/jmatprotec Author Index of Volume 140 Aoki, T., 13 Haga, T., 610 Kao, Y.-C., 116 Azhari, C.H., 694 Hahn, T.H., 185 Katayama, I., 157 Han, B.S., 641 Kawai, K., 500 Bhattacharayya, B., 711 Han, H., 303 Khoo, H.H., 326 Bhattacharyya, B., 287 Han, Y.W., 465 Khor, K.A., 420 Boey, F.Y.C., 413 Hatanaka, N., 628 Kiet Tieu, A., 569 Byon, S.M., 84 Hayashi, M., 30 Kim, H.S., 110, 401, 465 Hino, R., 494 Kim, I.J., 676 Chan, C.C., 358 Ho, C.Y., 260 Kim, I.K., 676 Chan, K.C., 141 Hocheng, H., 255, 264, 335 Kim, I.S., 676 Chang, J.-E., 237 Hou, C.C., 179 Kim, J.Y., 676 Chang, S.L., 100 Hsiang, S.-H., 6 Kim, N., 478 Hsiao, P.-Y., 520 Kim, S.1., 84 Chang, T.-C., 588 Hsieh, J.H., 662 Kim, S.W., 231 Cheang, P., 420 Chen, C.-C., 653 Hsu, C.C., 298 Kim, S.Y., 36 Chen, C.-C.A., 373 Hsu, C.-S., 332 Kim, Y.-H., 447 Hsu, H.-H., 604 Kiuchi, M., 163 Chen, C.-H., 248 Chen, F.-K., 129 Hsu, Q.C., 363 Ko, S.-L., 237 Chen, R.-H., 173 Hsu, T.-C., 49 Ko, Y., 478 Chen, S.L., 363 Hu, N.S., 152 Komiya, S., 705 Chen, T.-C., 432 Huang, C.A., 298 Ku, T.W., 65 Chen, W.K., 217 Huang, C.-C., 49, 505 Kudo, H., 500 Chen, Y.C., 269 Huang, C.-H., 688 Kumagaya, S., 13 Chen, Y.-L., 203 Huang, H., 217 Kumar, R., 420 Huang, M.N., 598 Kuo, H.H., 298 Chen, Y.-P., 688 Chen, Z.D., 460 Huang, M.-N., 622 Kuo, J.-L., 6 Huang, Y.-M., 191, 432 Kuriyama, S., 13 Cheon, J.S., 36 Cheung, C.F., 141, 211, 292, 346 Huh, H., 185, 616 Kwan, C.-T., 530 Chien, W.-T., 340 Hung, C., 173 Kwon, H.C., 471, 487 Chin, B.A., 668 Hung, C.-H., 30 Kwong, C.K., 147 Chiu, L.C., 136 Hung, J.-C., 30 Chiu, Y.Y., 136, 179 Hwang, Y.M., 426 Lai, J.-J., 206 Choi, K.H., 231 Lay, H.S., 426 Ibrahim, R., 397 Lee, C.M., 231 Choy, C.M., 460 lizuka, T., 407, 628 Lee, D.W., 231 Chueh, Y.C., 90 Chung, S.-W., 385 Ikawa, M., 610 Lee, H.S., 100 Im, Y.T., 36, 110, 465, 471, 487 Lee, J., 478 Imai, K., 379 Lee, J.W., 487 D’ Alessio, G., 562 Ip, K.W., 147 Lee, R.S., 43 Dohda, K., 514, 548 Lee, S., 583, 588 Du, M.-F., 280 Jeng, J.-Y., 191 Lee, S.-J., 203, 206, 280, 454, 688 Jeong, Y.-H., 548 Lee, S.-R., 373 Edwin Lee, M.K., 318 Jeong, Y.J., 676 Lee, W.B., 141, 211, 292, 346 Jiang, C.-P., 191 Lee, Y., 84, 471 Fan, H., 668 Jiang, Z., 76, 569 Lee, Y.-M., 280 Fann, K.-J., 520 Jiang, Z.Y., 123, 535, 542, 635 Li, C., 662 Fereshteh-Saniee, F., 555 Jin, M., 30 Ls, in SO Fuh, J.Y.H., 314, 368, 460 Jou, J.L., 43 Li, C.T., 167 Fukuzawa, Y., 157, 245 Li, J.G., 211 Kanayama, K., 407 Li, X.P., 308, 326, 352, 358 Gao, D., 211 Kang, B.S., 65 Liao, Y.S., 136, 179, 269, 274 Gotoh, M., 59 Kang, B.-S., 592 Lim, H.S., 303, 318 Guo, Y., 509 Kang, G.-J., 592 Lin, C.-R., 173 Guo, Y.-M., 19 Kao, P.S., 255, 264 Lin, F.C., 54 Elsevier B.V. doi: 10.1016/S0924-0136(03)00889-6 718 Author Index of Volume 140 Lin, J.-C., 197 Rahman, M., 303, 308, 318, 326, Tu, Y., 509 Lin, J.-J., 95 352, 358 Tzou, G.Y., 598 Lin, S.C., 264 Ravala, N.K., 668 Tzou, G.-Y., 604, 622 Lin, S.Y., 54 Ravi, N., 303 Lin, Y.C., 682 Rhee, M.H., 487 Uemori, T., 494 Lin, Y.-Y., 646 Lin, Z.-C., 653 Saiki, H., 25 Wakui, H., 705 Liu, C.-H., 576 Saotome, Y., 379 Wang, D.D., 562 Liu, J., 505 Sawa, M., 308, 326 Wang, G.D., 123 Liu, K., 352, 358 Sawada, T., 525 Wang, J.C., 203 Liu, Y., 509 Sawairi, Y., 59 Wang, J.P., 90 Lo, S.-P., 646 Sawanobori, N., 379 Wang, J.-Y., 588 Lo, Y.-L., 700 Sha, C.-K., 197 Wang, S.W., 682 Loh, H.T., 105, 368 Shen, X., 505 Wang, X., 368, 505 Lu, C., 76, 542, 562, 569, 635 Shiou, F.-J., 248 Wang, Z., 514, 548 Lu, J.K., 260 Showa, K., 385 Watari, H., 610 Lu, L., 314, 368, 460 Shu, L.-S., 373 Weng, F.-T., 332 Lu, Y.-H., 576 Shyu, R.F., 332 Wikle III, H.C., 668 Sidik, M.I., 397 Wong, Y.S., 105, 303, 318, 368, Ma, B., 635 Sogabe, M., 705 460 Maeda, Y., 308, 326 Son, I.H., 465 Wong, Y.W., 147 Manna, A., 711 Son, I.J., 676 Woo, J.S., 471 Marumo, Y., 25 Son, J.S., 110 Wu, M.-T., 576 Matsumoto, N., 705 Sugiyama, S., 163 Wu, W., 662 Miki, T., 407 Sun, J., 509 Wu, Y.-E., 700 Min, J.H., 471 Sun, W., 76 Wu, Y.F., 105 Miyauchi, K., 13 Sun, W.H., 542 Mohamad, M., 397 Sun, Y.H., 264 Xing, F., 509 Mohri, N., 245 Syu, S.W., 598 Montazeran, M.H., 555 Yamada, Y., | Moon, B.-Y., 385, 592 Takahashi, K., 610 Yamaguchi, K., 407, 628 Muchtar, A., 694 Takahashi, T., 13 Yamaguchi, T., 157 Munda, J., 287 Takakura, N., 407, 628 Yamashita, M., 59 Murakawa, M., 30 Takiguchi, M., 441 Yanagimoto, J., 163 Mustapha, M., 397 Talib, R.J., 694 Yang, C., 185 Muttamara, A., 245 Tan, A.L.K., 662 Yang, G.-E., 237 Myint, M.H., 460 Tanabe, M., 705 Yang, L.J., 391 Tang, Y., 368 Yang, Y.-L., 583 Nagasawa, S., 157 Tani, T., 245 Yaragada, P.K.D.V., 676 Naka, T., 494 Tatsuki, Y., 500 Yea, Y., 478 Nakamura, T., 514 Thipprakmas, S., 30 Yeh, F.-H., 576 Nakanishi, K., 19 Thiruvarudchelvan, S., 70 Yoon, J.H., 616 Nakayama, Y., 494 Tieu, A.K., 76, 123, 535, 542, Yoshida, F., 441, 494 Neo, K.S., 308, 326, 358 562, 635 Yoshida, Y., 13 Nguyen, T., 224 To, S., 292, 346 Yuen, W.Y.D., 562 Tok, A.LY., 413 O, C.-M., 588 Tong, Q., 509 Zarudi, I., 641 Obika, T., 514 Travis, F.W., 70 Zhang, L.C., 152, 224 Ohta, T., 525 Tsai, C.-E., 129 Zhang, X.M., 542 Okuda, H., 705 Tsai, C.-S., 340 Zhang, Y.F., 105 Omar, M.A., 397 Tsai, H.-L., 197 Zhou, L., 509 Tsai, Y.-C., 30 Zhu, H., 76 Park, J.-J., 447, 454 Tsai, Y.Y., 682 Zhu, H.H., 314 Peng, W.Y., 274 Tsao, C.C., 335 Zhu, H.T., 123, 535 Pramanik, A., 308 Tsukatani, S., 157 Zhu, S.-M., 203 Journal of Materials Processing uf + ~s Technology ELSEVIER Journal of Materials Processing Technology 140 (2003) 719-730 www.elsevier.com/locate/jmatprotec Subject Index of Volume 140 AA7075 aluminum alloys ANOVA Applying liquid film protection method to solid-state bonding An investigation on the hot extrusion process of magnesium alloy process of AA7075 aluminum alloys, 700 sheet, 6 ACLN Aspect ratio Neural network approach to recognize the grid patterns in experi- Three-dimensional finite element mesh generation from measured mental mechanics, 90 data of a stamping die, 129 Adaptive slicing Average contact pressure An adaptive slicing approach to modelling cloud data for rapid FEM analysis of contact mechanism in press-forming of lubricant prototyping, 105 pre-coated steel sheet, 514 Adaptive-network-based inference system Axial crush Study of ductile fracture and preform design of upsetting Axial crush of hollow cylindrical structures with various poly- process using adaptive network fuzzy inference system, gonal cross-sections. Numerical simulation and experiment, 576 59 Adhesive joints Analysis of plastic bending of adhesive-bonded sheet metals taking Back pressure account of viscoplasticity of adhesive, 441 Finite element modeling for chemical mechanical polishing process AISI 4140 steel under different back pressures, 646 Study on constitutive relation of AISI 4140 steel subject to large Ball end milling strain at elevated temperatures, 84 Evaluation of cutter orientations in high-speed ball end milling of Al/SiC-MMC cantilever-shaped thin plate, 231 A study on machinability of Al/SiC-MMC, 711 Ball-burnishing process Al-—Mg alloy sheet Freeform surface finish of plastic injection mold by using ball- Effects of temperature on yield locus for 5083 aluminum alloy burnishing process, 248 sheet, 494 Base isolation Alumina Hole and lead plug effect on fiber reinforced elastomeric isolator for A closed form solution for laser drilling of silicon nitride and seismic isolation, 592 alumina ceramics, 260 Bead geometry Aluminium alloy Sensitivity analysis for process parameters influencing weld quality The effect of casting temperature on the properties of squeeze cast in robotic GMA welding process, 676 aluminium and zinc alloys, 391 Bending Aluminium nitride Effect of crease depth and crease deviation on folding deformation Porous AIN ceramic substrates by reaction sintering, 413 characteristics of coated paperboard, 157 Aluminum Bending rigidity Fundamental studies on the incremental sheet metal forming tech- Determination of forming limit of a structural aluminum tube in nique, 447 rubber pad bending, 487 Analysis of variation (ANOVA) Bezier and B-spline surfaces Freeform surface finish of plastic injection mold by using ball- Three-dimensional finite element mesh generation from measured burnishing process, 248 data of a stamping die, 129 Analytic Biaxial tensile test Preventing non-uniform shrinkage in open-die hot embossing of Effects of temperature on yield locus for 5083 aluminum alloy PMMA microstructures, 173 sheet, 494 Analytical methods Blanking A comparative estimation of the forming load in the deep drawing Simulation of sheared edge formation process in blanking of sheet process, 555 metals, 628 Analytical model Bonding point Analytical model for prediction of deformed shape in three-roll Analytical modified model of the cold bond rolling of rolling process, 471 unbounded double-layers sheet considering hybrid friction, Anode profile 622 A material removal analysis of electrochemical machining using BPNN flat-end cathode, 264 Neural network approach to recognize the grid patterns in experi- Anodic polarization curve mental mechanics, 90 The surface characteristics of P/M high-speed steel (ASP 23) Bridge-LOM multi-cut with wire electrical discharge machine (WEDM), Automatic fabrication for bridged laminated object manufacturing 298 (LOM) process, 179 Elsevier B.V. doi: 10.1016/S0924-0136(03)00890-2 720 Subject Index of Volume 140 Buckling Color calibration Effect of crease depth and crease deviation on folding deformation Neural network approach to recognize the grid patterns in experi- characteristics of coated paperboard, 157 mental mechanics, 90 Built-up edge Combined technology A study on machinability of Al/SiC-MMC, 711 The technology combined electrochemical mechanical polishing, Bulk metal forming 203 Three-dimensional bulk metal forming simulations under a PC Composite materials cluster environment, 36 Numerical and experimental study on the gravitation and surface Burnish length tension effects on flow injection in center-gated disks, 167 Simulation of sheared edge formation process in blanking of sheet Evaluation of effective material properties of composite materials metals, 628 using special FEM, 185 Burr height Compression Simulation of sheared edge formation process in blanking of sheet Two analytical models of double-layer clad sheet compression metals, 628 forming based on the upper bound and the slab methods, 604 Burr minimization Compression test Burr minimizing scheme in drilling, 237 Study on constitutive relation of AISI 4140 steel subject to large strain at elevated temperatures, 84 CAD/CAE/CAM Conceptual design Development of a CAD/CAE/CAM system for a robot manipulator, Constructing an intelligent conceptual design system using genetic 100 algorithm, 95 Camber Conjugate gradient method An elasto-plastic finite-element analysis of sheet metal camber Optimization of loading conditions for tube hydroforming, 520 process, 432 Constitutive equation Candle stick drill Study on constitutive relation of AISI 4140 steel subject to large Comprehensive analysis of delamination in drilling of composite strain at elevated temperatures, 84 materials with various drill bits, 335 Densification modelling for nanocrystalline metallic powders, Cantilever-shaped aluminum 401 Evaluation of cutter orientations in high-speed ball end milling of Analysis of plastic bending of adhesive-bonded sheet metals taking cantilever-shaped thin plate, 231 account of viscoplasticity of adhesive, 441 CBN Constrain-surface stereolithography Characteristics of high speed micro-cutting of tungsten carbide, Increased accuracy by using dynamic finite element method in the 352 constrain-surface stereolithography system, 191 Ceramics Contact area ratio Evaluation of wear mechanisms of Y-TZP and tungsten carbide FEM analysis of contact mechanism in press-forming of lubricant punches, 460 pre-coated steel sheet, 514 Chemical—mechanical polishing Contact pressure Mechano-chemical polishing of silicon wafers, 373 Influence of the roughness geometry of tool surface and the flow Finite element modeling for chemical mechanical polishing process stress of coated solid lubricants on tribo-conditions in cold under different back pressures, 646 forging, 25 Cladding Control The effects of various ceramic—metal on wear performance of clad Low-cost infrared sensing system for monitoring the welding layer, 682 process in the presence of plate inclination angle, 668 Cloisonné Conventional drill Application of mushy/semi-solid joining—Part 3, 163 Burr minimizing scheme in drilling, 237 Cloud data Copper An adaptive slicing approach to modelling cloud data for rapid Densification modelling for nanocrystalline metallic powders, prototyping, 105 401 CO, laser alloying Copper-based alloy The impact characteristics of Ti-6Al-4V plates hardfacing by laser Development and characterisation of direct laser sintering Cu-based alloying NiAl + ZrO, powder, 197 metal powder, 314 Cold air Direct laser sintering of a copper-based alloy for creating three- An assessment of the applicability of cold air and oil mist in surface dimensional metal parts, 368 grinding, 224 Core drill Cold forging Comprehensive analysis of delamination in drilling of composite Influence of the roughness geometry of tool surface and the flow materials with various drill bits, 335 stress of coated solid lubricants on tribo-conditions in cold Corrosion resistance forging, 25 Investigation of PVD coating on corrosion resistance of metallic Cold rolling bipolar plates in PEM fuel cell, 688 Experiment investigation of deep-drawing sheet texture evolution, Coulomb friction 509 Analytical modified model of the cold bond rolling of unbounded Modeling and optimization of threading process for shape control in double-layers sheet considering hybrid friction, 622 tandem cold rolling, 562 Crush strength Modeling of the inlet zone in the mixed lubrication situation of cold Axial crush of hollow cylindrical structures with various polygonal strip rolling, 569 cross-sections. Numerical simulation and experiment, 59 Cold rolling of thin strip Crystallographic orientation Effect of rolling parameters on cold rolling of thin strip during work A mesoplasticitiy analysis of cutting friction in ultra-precision roll edge contact, 535 machining, 292 Subject Index of Volume 140 Cubic boron nitride (CBN) Design of isolator Performance evaluation of pure CBN tools for machining of steel, Hole and lead plug effect on fiber reinforced elastomeric isolator for 326 seismic isolation, 592 Cup drawing D-I can Hydraulic-pressure-enhanced cup-drawing processes—an apprai- Development of simulation code for calculating residual stress sal, 70 distribution in D-I cans produced by both-sided ironing process, Cup wheel 13 Ultra precision grinding of spherical convex surfaces on combina- Diamond tool tion brittle materials using resin and metal bond cup wheels, 217 Nano-precision measurement of diamond tool edge radius for wafer Current off time fabrication, 358 Study of electrical discharge machining technology for slicing Diamond turning silicon ingots, 274 An NC tool path translator for virtual machining of precision optical Current on time products, 211 Study of electrical discharge machining technology for slicing Cutting performance of diamond tools during ultra-precision turn- silicon ingots, 274 ing of electroless-nickel plated die materials, 308 I-V curves Die life The polishing mechanism of electrochemical mechanical polishing Application of numerical simulation for wear analysis of warm technology, 280 forging die, 43 Cutter orientation Dielectric constant Evaluation of cutter orientations in high-speed ball end milling of Porous AIN ceramic substrates by reaction sintering, 413 cantilever-shaped thin plate, 231 Direct laser sintering Cutting dynamics Development and characterisation of direct laser sintering Cu-based Surface characterization in ultra-precision machining of Al/SiC metal powder, 314 metal matrix composites using data dependent systems analysis, Direct laser sintering of a copper-based alloy for creating three- 141 dimensional metal parts, 368 Cutting force Discharge energy A mesoplasticitiy analysis of cutting friction in ultra-precision Investigation of micro-EDM material removal characteristics using machining, 292 single RC-pulse discharges, 303 A study on machinability of Al/SiC-MMC, 711 Dislocation model Densification modelling for nanocrystalline metallic powders, 3D finite element mesh generation 401 Three-dimensional finite element mesh generation from measured Distorted element data of a stamping die, 129 Efficiency enhancement in sheet metal forming analysis with a 3D metal part mesh regularization method, 616 Direct laser sintering of a copper-based alloy for creating three- Double passes dimensional metal parts, 368 Finite element analysis of strain conditions after equal channel Data dependent systems analysis angular extrusion, 583 Surface characterization in ultra-precision machining of Al/SiC Double-layer clad sheet metal matrix composites using data dependent systems analysis, Two analytical models of double-layer clad sheet compression 141 forming based on the upper bound and the slab methods, 604 Debinding Drawing force Rapid debinding of 316L stainless steel injection moulded compo- Simulation of ultrasonic-vibration drawing using the finite element nent, 397 method (FEM), 30 Deep drawing Drilling Development of simulation code for calculating residual stress dis- Burr minimizing scheme in drilling, 237 tribution in D-I cans produced by both-sided ironing process, 13 Study on wear mechanisms in drilling of Inconel 718 superalloy, Hydraulic-pressure-enhanced cup-drawing processes—an appraisal, 269 70 Comprehensive analysis of delamination in drilling of composite A comparative estimation of the forming load in the deep drawing materials with various drill bits, 335 process, 555 Deep-drawing sheet ECAE Experiment investigation of deep-drawing sheet texture evolution, Finite element analysis of strain conditions after equal channel 509 angular extrusion, 583 Deformation mechanism Eccentric tube nosing process Deformation and material removal rate in polishing silicon wafers, An analysis of the eccentric nosing process of metal tubes, 530 641 ECM Deformation mode Optimization of electrochemical polishing of stainless steel by grey Study on constitutive relation of AISI 4140 steel subject to large relational analysis, 255 strain at elevated temperatures, 84 Edge radius Delamination Nano-precision measurement of diamond tool edge radius for wafer Effect of crease depth and crease deviation on folding deformation fabrication, 358 characteristics of coated paperboard, 157 Effective material property Comprehensive analysis of delamination in drilling of composite Evaluation of effective material properties of composite materials materials with various drill bits, 335 using special FEM, 185 Denavit—Hartenberg coordinate transformation Efficiency Development of aCAD/CAE/CAM system for a robot manipulator, Investigation of micro-EDM material removal characteristics using 100 single RC-pulse discharges, 303 722 Subject Index of Volume 140 Elastic deformation Extrusion Modeling of the inlet zone in the mixed lubrication situation of cold The friction modeling of different tribological interfaces in extru- strip rolling, 569 sion process, 49 Elastic—plastic material Development of simulation code for calculating residual stress FEM distribution in D-I cans produced by both-sided ironing process, FEM analysis of contact mechanism in press-forming of lubricant 13 pre-coated steel sheet, 514 Elastohydrodynamic lubrication Finite element analysis of strain conditions after equal channel Simulation of solidification of lubricant in metal forming, 525 angular extrusion, 583 Elasto-plastic Fiber reinforced elastomeric isolator An elasto-plastic finite-element analysis of sheet metal camber Hole and lead plug effect on fiber reinforced elastomeric isolator for process, 432 seismic isolation, 592 Elasto-plastic finite element Fine-grained microstructure Study of ductile fracture and preform design of upsetting process Finite element analysis of strain conditions after equal channel using adaptive network fuzzy inference system, 576 angular extrusion, 583 Electrical discharge machining Finite element analysis Probability of precision micro-machining of insulating Si,N, cera- Increased accuracy by using dynamic finite element method in the mics by EDM, 245 constrain-surface stereolithography system, 191 Electric-discharge machining Densification modelling for nanocrystalline metallic powders, Studies on electric-discharge machining of non-contact seal face 401 grooves, 363 Study on superplastic blow-forming in a rectangular closed-die, Electrochemical machining 426 A material removal analysis of electrochemical machining using Design of rolling pass schedules to improve grain-size uniformity in flat-end cathode, 264 thickness, 454 Experimental investigation into electrochemical micromachining Efficiency enhancement in sheet metal forming analysis with a (EMM) process, 287 mesh regularization method, 616 Electrochemical mechanical polishing Finite element method (FEM) The polishing mechanism of electrochemical mechanical polishing Development of simulation code for calculating residual stress technology, 280 distribution in D-I cans produced by both-sided ironing process, Electrochemical polishing 13 The technology combined electrochemical mechanical polishing, Simulation of ultrasonic-vibration drawing using the finite element 203 method (FEM), 30 Electrochemical polishing mechanism FE approach and experiments for an axisymmetric micro-yoke part The polishing mechanism of electrochemical mechanical polishing forming using grain element and grain boundary element, 65 technology, 280 Numerical and experimental study on the gravitation and surface Electro-discharge machining tension effects on flow injection in center-gated disks, 167 A study on the machining of high-aspect ratio micro-structures Modified looping technique for remeshing of forming simulations using micro-EDM, 318 with free surface folding, 465 Electroless-nickel Optimization of loading conditions for tube hydroforming, 520 Cutting performance of diamond tools during ultra-precision turn- Simulation of solidification of lubricant in metal forming, 525 ing of electroless-nickel plated die materials, 308 An analysis of the eccentric nosing process of metal tubes, 530 Electropolishing Simulation of sheared edge formation process in blanking of sheet Optimization of electrochemical polishing of stainless steel by grey metals, 628 relational analysis, 255 Finite element modeling for chemical mechanical polishing process Electropolishing (EP) under different back pressures, 646 The effects of electropolishing (EP) process parameters on corro- Finite-element modeling sion resistance of 316L stainless steel, 206 Comparison of asperity flattening under different wavelength mod- Empirical mode els for sheet metal forming, 635 Sensitivity analysis for process parameters influencing weld quality Finite-element simulation in robotic GMA welding process, 676 A comparative estimation of the forming load in the deep drawing Enamel process, 555 Application of mushy/semi-solid joining—Part 3, 163 Flatness Evaluation mechanism A fuzzy algorithm for flatness control in hot strip mill, 123 Constructing an intelligent conceptual design system using genetic Flow front algorithm, 95 Numerical and experimental study on the gravitation and surface Experimental strain analysis tension effects on flow injection in center-gated disks, 167 Analysis of plastic bending of adhesive-bonded sheet metals taking Foam account of viscoplasticity of adhesive, 441 Porous AIN ceramic substrates by reaction sintering, 413 Expert system Formability Development of an applied roll forming pass design expert system Fundamental studies on the incremental sheet metal forming tech- based on the shape element idea, 505 nique, 447 Explicit formulation Forming Deformation and material removal rate in polishing silicon wafers, A backward extrusion analysis by the rigid—plastic integralless— 641 meshless method, 19 Extruded aluminum tube Forming limit Determination of forming limit of a structural aluminum tube in Determination of forming limit of a structural aluminum tube in rubber pad bending, 487 rubber pad bending, 487 Subject Index of Volume 140 Forming limit curve Grain boundary element Fundamental studies on the incremental sheet metal forming tech- FE approach and experiments for an axisymmetric micro-yoke part nique, 447 forming using grain element and grain boundary element, 65 Forming simulation Grain element An analysis of the eccentric nosing process of metal tubes, 530 FE approach and experiments for an axisymmetric micro-yoke part Fracture toughness forming using grain element and grain boundary element, 65 Spark plasma sintering and in vitro study of ultra-fine HA and Grain size ZrO.—HA powders, 420 Design of rolling pass schedules to improve grain-size uniformity in Free surface folding thickness, 454 Modified looping technique for remeshing of forming simulations Gravitation with free surface folding, 465 Numerical and experimental study on the gravitation and surface Friction tension effects on flow injection in center-gated disks, 167 A mesoplasticitiy analysis of cutting friction in ultra-precision Gravity casting machining, 292 The effect of casting temperature on the properties of squeeze cast Comparison of asperity flattening under different wavelength mod- aluminium and zinc alloys, 391 els for sheet metal forming, 635 Grey relational analysis Friction coefficient Optimization of electrochemical polishing of stainless steel by grey FEM analysis of contact mechanism in press-forming of lubricant relational analysis, 255 pre-coated steel sheet, 514 Grinding Lubricity of volatile lubricants in sheet metal rolling, 548 A study on the grindability of multidirectional carbon fibre-rein- Friction materials forced plastics, 152 Microstructural characteristics on the surface and subsurface of Grinding force semimetallic automotive friction materials during braking pro- A study on the grindability of multidirectional carbon fibre-rein- cess, 694 forced plastics, 152 Friction modeling An assessment of the applicability of cold air and oil mist in surface The friction modeling of different tribological interfaces in extru- grinding, 224 sion process, 49 Groove indentation Friction variation Effect of crease depth and crease deviation on folding deformation Finite element simulation of cold rolling of thin strip, 542 characteristics of coated paperboard, 157 Frictional coefficient Influence of the roughness geometry of tool surface and the flow Hard coating stress of coated solid lubricants on tribo-conditions in cold Synthesis of Ti(C, N, O) coatings by unbalanced magnetron sput- forging, 25 tering, 662 Full film zone Hardfacing Modeling of the inlet zone in the mixed lubrication situation of cold The impact characteristics of Ti-6AI-4V plates hardfacing by laser strip rolling, 569 alloying NiAl + ZrO. powder, 197 Fuzzy control Hardness A fuzzy algorithm for flatness control in hot strip mill, 123 An assessment of the applicability of cold air and oil mist in surface Fuzzy regression grinding, 224 Fuzzy regression approach to modelling transfer moulding for Hesitation effect microchip encapsulation, 147 Gate location design in injection molding of an automobile junction box with integral hinges, 110 Gap High speed A material removal analysis of electrochemical machining using Characteristics of high speed micro-cutting of tungsten carbide, 352 flat-end cathode, 264 High-aspect ratio Gas tungsten arc welding A study on the machining of high-aspect ratio micro-structures The effects of various ceramic—metal on wear performance of clad using micro-EDM, 318 layer, 682 High-speed steel Gate location design The surface characteristics of P/M high-speed steel (ASP 23) multi- Gate location design in injection molding of an automobile junction cut with wire electrical discharge machine (WEDM), 298 box with integral hinges, 110 Hollow cylindrical structure Genetic algorithm Axial crush of hollow cylindrical structures with various polygonal Constructing an intelligent conceptual design system using genetic cross-sections. Numerical simulation and experiment, 59 algorithm, 95 Hot embossing Modeling and optimization of threading process for shape control in Preventing non-uniform shrinkage in open-die hot embossing of tandem cold rolling, 562 PMMA microstructures, 173 Geometrical conditions Hot extrusion Influences of the geometrical conditions of die and workpiece An investigation on the hot extrusion process of magnesium alloy on the barreling formation during forging—extrusion process, sheet, 6 54 Hot rolling Glass Surface characteristics of oxide scale in hot strip rolling, 76 Microformability of optical glasses for precision molding, 379 Design of rolling pass schedules to improve grain-size uniformity in Glass/meal joining thickness, 454 Application of mushy/semi-solid joining—Part 3, 163 Experiment investigation of deep-drawing sheet texture evolution, GMA welding process 509 Sensitivity analysis for process parameters influencing weld quality Hot strip mill in robotic GMA welding process, 676 A fuzzy algorithm for flatness control in hot strip mill, 123 724 Subject Index of Volume 140 Hybrid friction KeMulti-EDM grinding process Analytical modified model of the cold bond rolling of unbounded Fabrication of micro-electrodes by multi-EDM grinding process, 332 double-layers sheet considering hybrid friction, 622 Hydraulic-pressure-aided drawing 316L stainless steel Hydraulic-pressure-enhanced cup-drawing processes—an apprai- The effects of electropolishing (EP) process parameters on corro- sal, 70 sion resistance of 316L stainless steel, 206 Hydrodynamic inlet Laminated object manufacturing (LOM) Modeling of the inlet zone in the mixed lubrication situation of cold Automatic fabrication for bridged laminated object manufacturing strip rolling, 569 (LOM) process, 179 Hydroforming Laser burr measurement Hydraulic-pressure-enhanced cup-drawing processes—an apprai- Burr minimizing scheme in drilling, 237 sal, 70 Laser drilling Hydromechanical forming A closed form solution for laser drilling of silicon nitride and Hydraulic-pressure-enhanced cup-drawing processes—an apprai- alumina ceramics, 260 sal, 70 Layer manufacturing Hydroxyapatite A new approach of online waste removal process for laminated Spark plasma sintering and in vitro study of ultra-fine HA and object manufacturing (LOM), 136 ZrO.—HA powders, 420 Limit frictional coefficient Investigation on comparisons between two analytical models of IC packaging sandwich sheet rolling bonded before rolling, 598 The application of the moment equilibrium model to the offset of Liquid film protection (LFP) pressure center of trimming progressive die in IC packaging Applying liquid film protection method to solid-state bonding machine, 653 process of AA7075 aluminum alloys, 700 Impact vibration Liquid-phase sintering The impact characteristics of Ti-6Al4V plates hardfacing by laser Development and characterisation of direct laser sintering Cu-based alloying NiAl + ZrO» powder, 197 metal powder, 314 In vitro testing Localized corrosion (IGC) Spark plasma sintering and in vitro study of ultra-fine HA and The effects of electropolishing (EP) process parameters on corro- ZrO.—HA powders, 420 sion resistance of 316L stainless steel, 206 Inconel 718 LOM Study on wear mechanisms in drilling of Inconel 718 superalloy, A new approach of online waste removal process for laminated 269 object manufacturing (LOM), 136 Incremental forming Long rods Fundamental studies on the incremental sheet metal forming tech- Production of long rods by sequential extrusion of wood powders, nique, 447 407 Influence function method Low superheat casting Effect of rolling parameters on cold rolling of thin strip during work A vertical-type twin roll caster for aluminum alloy strips, 610 roll edge contact, 535 Lubricant pre-coated steel sheet Infrared sensing FEM analysis of contact mechanism in press-forming of lubricant Low-cost infrared sensing system for monitoring the welding pre-coated steel sheet, 514 process in the presence of plate inclination angle, 668 Lubrication Injection molding An assessment of the applicability of cold air and oil mist in surface Gate location design in injection molding of an automobile junction grinding, 224 box with integral hinges, 110 Lubricity of volatile lubricants in sheet metal rolling, 548 Injection moulding Lyophobic fluid Development and characterisation of direct laser sintering Cu-based Mechanical properties study and design of a suspension system by metal powder, 314 considering tension force, 385 Insulating ceramic Probability of precision micro-machining of insulating Si;N, cera- Magnesium alloy AZ31 mics by EDM, 245 Grain refining of magnesium alloy AZ31 by rolling, 588 Integral hinge Magnesium alloy sheet Gate location design in injection molding of an automobile junction An investigation on the hot extrusion process of magnesium alloy box with integral hinges, 110 sheet, 6 Integralless method Magnetron sputtering A backward extrusion analysis by the rigid—plastic integralless— Synthesis of Ti(C, N, O) coatings by unbalanced magnetron sput- meshless method, 19 tering, 662 Interaction between wheel and rail Material removal Computational model of a Shinkansen train running on the railway A material removal analysis of electrochemical machining using structure and the industrial applications, 705 flat-end cathode, 264 Ironing Deformation and material removal rate in polishing silicon wafers, Development of simulation code for calculating residual stress 641 distribution in D-I cans produced by both-sided ironing process, Material removal mechanism 13 Investigation of micro-EDM material removal characteristics using single RC-pulse discharges, 303 Junction box Measured data Gate location design in injection molding of an automobile junction Three-dimensional finite element mesh generation from measured box with integral hinges, 110 data of a stamping die, 129 Subject Index of Volume 140 Measurement Microstructural characteristics on the surface and subsurface of Nano-precision measurement of diamond tool edge radius for wafer semimetallic automotive friction materials during braking pro- fabrication, 358 cess, 694 Mechanical polishing Microvoid The technology combined electrochemical mechanical polishing, Microstructural characteristics on the surface and subsurface of 203 semimetallic automotive friction materials during braking pro- Mechanical properties cess, 694 The effect of casting temperature on the properties of squeeze cast Micro-yoke part aluminium and zinc alloys, 391 FE approach and experiments for an axisymmetric micro-yoke part Mechano-chemical polishing forming using grain element and grain boundary element, 65 Mechano-chemical polishing of silicon wafers, 373 Mill setup MEMS Modeling and optimization of threading process for shape control in Microformability of optical glasses for precision molding, 379 tandem cold rolling, 562 Mesh regularization Milli-structure forming Efficiency enhancement in sheet metal forming analysis with a FE approach and experiments for an axisymmetric micro-yoke part mesh regularization method, 616 forming using grain element and grain boundary element, 65 Meshless method Miniaturization A backward extrusion analysis by the rigid—plastic integralless— FE approach and experiments for an axisymmetric micro-yoke meshless method, 19 part forming using grain element and grain boundary element, Mesoplasticity 65 A mesoplasticitiy analysis of cutting friction in ultra-precision Mixed film regime machining, 292 Modeling of the inlet zone in the mixed lubrication situation of cold Metal extrusion strip rolling, 569 Development of a remote quick CAE system on sculptured metal Model extrusion die surface, 116 The investigation on the prediction of tool wear and the determina- Metal forming tion of optimum cutting conditions in machining 17-4PH stain- Rotary straightening of curved shape near both ends of seamless less steel, 340 pipe, 500 Modelling Metal injection moulding Investigation of micro-EDM material removal characteristics using Rapid debinding of 316L stainless steel injection moulded compo- single RC-pulse discharges, 303 nent, 397 Finite element simulation of cold rolling of thin strip, 542 Metal matrix composites Modified looping technique Surface characterization in ultra-precision machining of Al/SiC Modified looping technique for remeshing of forming simulations metal matrix composites using data dependent systems analysis, with free surface folding, 465 141 Moisture content Metallic bipolar plates Production of long rods by sequential extrusion of wood powders, Investigation of PVD coating on corrosion resistance of metallic 407 bipolar plates in PEM fuel cell, 688 Mold cavity Microchip encapsulation Freeform surface finish of plastic injection mold by using ball- Fuzzy regression approach to modelling transfer moulding for burnishing process, 248 microchip encapsulation, 147 Moment equilibrium principle Microcrack The application of the moment equilibrium model to the offset of Microstructural characteristics on the surface and subsurface of pressure center of trimming progressive die in IC packaging semimetallic automotive friction materials during braking pro- machine, 653 cess, 694 Multidirectional CFRP composites Micro-cutting A study on the grindability of multidirectional carbon fibre-rein- Characteristics of high speed micro-cutting of tungsten carbide, 352 forced plastics, 152 Micro-EDM Multi-pass bar rolling Investigation of micro-EDM material removal characteristics using Analytical model for prediction of deformed shape in three-roll single RC-pulse discharges, 303 rolling process, 471 A study on the machining of high-aspect ratio micro-structures Multi-speed method using micro-EDM, 318 An investigation on the hot extrusion process of magnesium alloy Micro-electrode sheet, 6 Probability of precision micro-machining of insulating Si;N, cera- Mushy processing mics by EDM, 245 Application of mushy/semi-solid joining—Part 3, 163 Fabrication of micro-electrodes by multi-EDM grinding process, 332 Nano-composites Micromachining Spark plasma sintering and in vitro study of ultra-fine HA and Experimental investigation into electrochemical micromachining ZrO2.—-HA powders, 420 (EMM) process, 287 Nano-forming Micro-nozzles Microformability of optical glasses for precision molding, 379 Fabrication of micro-electrodes by multi-EDM grinding process, 332 Nano-precision Microspheres Nano-precision measurement of diamond tool edge radius for wafer Porous AIN ceramic substrates by reaction sintering, 413 fabrication, 358 Microstructure NC tool path A study on the machining of high-aspect ratio micro-structures An NC tool path translator for virtual machining of precision optical using micro-EDM, 318 products, 211 726 Subject Index of Volume 140 Neural network PID control A fuzzy algorithm for flatness control in hot strip mill, 123 A fuzzy algorithm for flatness control in hot strip mill, 123 Newtonian viscous flow Plane elasticity Microformability of optical glasses for precision molding, 379 Evaluation of effective material properties of composite materials Non-contact seal using special FEM, 185 Studies on electric-discharge machining of non-contact seal face Plane extrusion grooves, 363 Neural network approach to recognize the grid patterns in experi- Nonlinear dynamics mental mechanics, 90 Computational model of a Shinkansen train running on the railway Plastic bending structure and the industrial applications, 705 Analysis of plastic bending of adhesive-bonded sheet metals taking Nonuniformity account of viscoplasticity of adhesive, 441 Finite element modeling for chemical mechanical polishing process Plastic forming under different back pressures, 646 Lubricity of volatile lubricants in sheet metal rolling, 548 Numerical analysis Simulation of sheared edge formation process in blanking of sheet Analysis of plastic bending of adhesive-bonded sheet metals taking metals, 628 account of viscoplasticity of adhesive, 441 Plate inclination effects Numerical simulation Low-cost infrared sensing system for monitoring the welding Application of numerical simulation for wear analysis of warm process in the presence of plate inclination angle, 668 forging die, 43 Point angle NURBS Burr minimizing scheme in drilling, 237 Efficiency enhancement in sheet metal forming analysis with a Polygonal cross-section mesh regularization method, 616 Axial crush of hollow cylindrical structures with various polygonal cross-sections. Numerical simulation and experiment, 59 Online de-cubing Porous materials model A new approach of online waste removal process for laminated Densification modelling for nanocrystalline metallic powders, object manufacturing (LOM), 136 401 On-machine measurement Powder A study on the machining of high-aspect ratio micro-structures Mechanical properties study and design of a suspension system by using micro-EDM, 318 considering tension force, 385 Optical products Powder compaction An NC tool path translator for virtual machining of precision optical Densification modelling for nanocrystalline metallic powders, 401 products, 211 Power spectrum analysis Optimization A mesoplasticitiy analysis of cutting friction in ultra-precision The investigation on the prediction of tool wear and the determina- machining, 292 tion of optimum cutting conditions in machining 17-4PH stain- Precision engineering less steel, 340 Studies on electric-discharge machining of non-contact seal face Optimization of loading conditions for tube hydroforming, 520 grooves, 363 Orientation changes Prediction Orientation changes of aluminium single crystals in ultra-precision The investigation on the prediction of tool wear and the determina- diamond turning, 346 tion of optimum cutting conditions in machining 17-4PH stain- Orthotropy less steel, 340 Effect of crease depth and crease deviation on folding deformation Preform characteristics of coated paperboard, 157 Study of ductile fracture and preform design of upsetting process Oxide scales using adaptive network fuzzy inference system, 576 Surface characteristics of oxide scale in hot strip rolling, 76 Press bonding Applying liquid film protection method to solid-state bonding Parallel processing process of AA7075 aluminum alloys, 700 Three-dimensional bulk metal forming simulations under a PC Press-forming cluster environment, 36 FEM analysis of contact mechanism in press-forming of lubricant Pass design pre-coated steel sheet, 514 Development of an applied roll forming pass design expert system Pressure distribution based on the shape element idea, 505 Prediction of spread, pressure distribution and roll force in ring Passive film rolling process using rigid—plastic finite element method, The polishing mechanism of electrochemical mechanical polishing 478 technology, 280 Pressure spike Patch Simulation of solidification of lubricant in metal forming, 525 Efficiency enhancement in sheet metal forming analysis with a Process design mesh regularization method, 616 Design of rolling pass schedules to improve grain-size uniformity in Pattern recognition thickness, 454 Neural network approach to recognize the grid patterns in experi- Process modelling mental mechanics, 90 Fuzzy regression approach to modelling transfer moulding for PC cluster microchip encapsulation, 147 Three-dimensional bulk metal forming simulations under a PC Profile cluster environment, 36 Effect of rolling parameters on cold rolling of thin strip during work PEMFC roll edge contact, 535 Investigation of PVD coating on corrosion resistance of metallic Profile and flatness bipolar plates in PEM fuel cell, 688 Finite element simulation of cold rolling of thin strip, 542

See more

The list of books you might like

Upgrade Premium
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.
DMCA & Copyright: Dear all, most of the website is community built, users are uploading hundred of books everyday, which makes really hard for us to identify copyrighted material, please contact us if you want any material removed.
Copyright @ PDFdrive.to, 2022 | We love our users