Journal of Materials Processing Technology 2002: Vol 120 Index

9 Pages·2002·1.7 MB·English

Journal of
Materials
Processing
Technology
R Journal of Materials Processing Technology 120 (2002) 466-467
www.elsevier.com/locate/jmatprotec
Author Index of Volume 120
Abe, Y., 412 Guo, D., 265 Luan, G.F., 90
Abo-Elkhar, M., 296 Guo, X.F., 202 Luis, C.J., 281
Ahn, K.-C., 458 Guodong, W., 53
Altan, T., 348 Mac Donald, B.J., 335, 341
Alvarez, L., 281 Hardy, S.J., 385 Magee, J., 322
An, J., 30 Hashmi, M.S.J., 335, 341 Mannan, M.A., 243
Atkinson, J., 374 Hocheng, H., 6 Masuda, I., 412
Hongfan, J., 76 Matsuo, M., 412
Bae, K.-Y., 458 Hongyu, W., 101 Mezzetti, M., 432
Bae, W.B., 290 Hongzan, B., 84 Mori, K., 412
Bai, G.R., 90 Hoppe, S., 450 Morris, J.W., 385
Bao, Q.S., 68 Hu, J., 94 Muju, M.K., 438
Bao, Y., 259 Hu, P., 37, 45 Miiller, N., 450
Beck, T., 450 Huaibao, W., 62
Berni, G., 310 Hwang, B.C., 290 Na, S.J., 208
Boey, F.Y.C., 215 Naddeo, A., 303
Jehng, W.-K., 115 Ning, C., 107
Cao, Y., 37 Jia, M., 21 Nothe, T., 450
Cappetti, N., 303 Jianzhong, W., 84
Chang, W.S., 208 Jin, Z., 265 Pa, PS., 6
Chen, P., 275 Jin, Z.H., 17 Paes, M., 365
Chen, Q., 270 Joshi, S.C., 215 Pappalardo, M., 303
Chen, R., 21 Jung, H.K., 355
Parng, S.H., 133
Chen, T.M., 126
Patel, J.K., 316
Chen, W., 94 Kang, C.G., 355 Puertas, I., 281
Chunguang, Z., 107 Kelly, J.F., 327
Colas, R., 432 Kim, H.Y., 290 Raedt, H.-W., 450
Cotterell, M.G., 327 Klocke, F., 450
Ransing, R.S., 310
Cox, LJ., 310 Krieg, T., 450
Rodriguez, A., 432
Kumar, A., 438
Rong, M., 107
Kuo, H.-C., 151,
Daoud, A., 296
Kuo, H.C., 186
Das, M.K., 397 Shangwu, X., 53
David Chua, S.N., 335
Laiying, L., | Shen, Q., 111
DDien gV,i nW, .,L .J9.4, 322 Lam, Y.C., 215 Sheppard, T., 426
Laszczewski, H., 310 Shichun, D., 101
Donnarumma, A., 303 Lee, T.-H., 458 Shuiping, L., 84
Duan, J., 275 Leong, K.C., 249 Sikdar, S.K., 243
Duan, Q., 249 Lewis, R.W., 310 Smith, L.N., 419
Duan, X., 426 Li, C.S., 26 Smith, M.L., 419
Li, D., 37 Song, X., 21
Es-Sadiqi, E., 365 Lin, J.C., 226 Song, Y., 237
Lin, Y.C., 126 Sun, G., 265
Fang, W., 13 Lin, Z., 259 Sweeney, K., 450
Fodor, P., 432 Liu, D.M., 140
Fubao, Z., 144 Liu, F., 202 Takuda, H., 412
Liu, G., 259 Tan, F.L., 249
Gao, Y., 140 Liu, X.H., 26 Tang, G.Y., 13
German, R.M., 419 Liu, Y., 80 Tang, Y.Y., 68
Ghoreishi, M., 374 Liu, Y.B., 30 Tay, F.E.H., 243
Ghoshdastidar, P.S., 397, 438 Liu, Y.Q., 45 Thomas, J.T., 385
Guanjun, Q., 107 Liu, Z., 94 Tok, A.LY., 215
Guanxin, C., 101 Livatyali, H., 348
Guifang, Z., 53 Lu, Y., 94 Ugalde, M.J., 281
Elsevier Science B.V.
PII: $0924-0136(01)01237-7
Journal of
Materials
Processing
Technology
R Journal of Materials Processing Technology 120 (2002) 466-467
www.elsevier.com/locate/jmatprotec
Author Index of Volume 120
Abe, Y., 412 Guo, D., 265 Luan, G.F., 90
Abo-Elkhar, M., 296 Guo, X.F., 202 Luis, C.J., 281
Ahn, K.-C., 458 Guodong, W., 53
Altan, T., 348 Mac Donald, B.J., 335, 341
Alvarez, L., 281 Hardy, S.J., 385 Magee, J., 322
An, J., 30 Hashmi, M.S.J., 335, 341 Mannan, M.A., 243
Atkinson, J., 374 Hocheng, H., 6 Masuda, I., 412
Hongfan, J., 76 Matsuo, M., 412
Bae, K.-Y., 458 Hongyu, W., 101 Mezzetti, M., 432
Bae, W.B., 290 Hongzan, B., 84 Mori, K., 412
Bai, G.R., 90 Hoppe, S., 450 Morris, J.W., 385
Bao, Q.S., 68 Hu, J., 94 Muju, M.K., 438
Bao, Y., 259 Hu, P., 37, 45 Miiller, N., 450
Beck, T., 450 Huaibao, W., 62
Berni, G., 310 Hwang, B.C., 290 Na, S.J., 208
Boey, F.Y.C., 215 Naddeo, A., 303
Jehng, W.-K., 115 Ning, C., 107
Cao, Y., 37 Jia, M., 21 Nothe, T., 450
Cappetti, N., 303 Jianzhong, W., 84
Chang, W.S., 208 Jin, Z., 265 Pa, PS., 6
Chen, P., 275 Jin, Z.H., 17 Paes, M., 365
Chen, Q., 270 Joshi, S.C., 215 Pappalardo, M., 303
Chen, R., 21 Jung, H.K., 355
Parng, S.H., 133
Chen, T.M., 126
Patel, J.K., 316
Chen, W., 94 Kang, C.G., 355 Puertas, I., 281
Chunguang, Z., 107 Kelly, J.F., 327
Colas, R., 432 Kim, H.Y., 290 Raedt, H.-W., 450
Cotterell, M.G., 327 Klocke, F., 450
Ransing, R.S., 310
Cox, LJ., 310 Krieg, T., 450
Rodriguez, A., 432
Kumar, A., 438
Rong, M., 107
Kuo, H.-C., 151,
Daoud, A., 296
Kuo, H.C., 186
Das, M.K., 397 Shangwu, X., 53
David Chua, S.N., 335
Laiying, L., | Shen, Q., 111
DDien gV,i nW, .,L .J9.4, 322 Lam, Y.C., 215 Sheppard, T., 426
Laszczewski, H., 310 Shichun, D., 101
Donnarumma, A., 303 Lee, T.-H., 458 Shuiping, L., 84
Duan, J., 275 Leong, K.C., 249 Sikdar, S.K., 243
Duan, Q., 249 Lewis, R.W., 310 Smith, L.N., 419
Duan, X., 426 Li, C.S., 26 Smith, M.L., 419
Li, D., 37 Song, X., 21
Es-Sadiqi, E., 365 Lin, J.C., 226 Song, Y., 237
Lin, Y.C., 126 Sun, G., 265
Fang, W., 13 Lin, Z., 259 Sweeney, K., 450
Fodor, P., 432 Liu, D.M., 140
Fubao, Z., 144 Liu, F., 202 Takuda, H., 412
Liu, G., 259 Tan, F.L., 249
Gao, Y., 140 Liu, X.H., 26 Tang, G.Y., 13
German, R.M., 419 Liu, Y., 80 Tang, Y.Y., 68
Ghoreishi, M., 374 Liu, Y.B., 30 Tay, F.E.H., 243
Ghoshdastidar, P.S., 397, 438 Liu, Y.Q., 45 Thomas, J.T., 385
Guanjun, Q., 107 Liu, Z., 94 Tok, A.LY., 215
Guanxin, C., 101 Livatyali, H., 348
Guifang, Z., 53 Lu, Y., 94 Ugalde, M.J., 281
Elsevier Science B.V.
PII: $0924-0136(01)01237-7
Author Index of Volume 120
Wang, F., 237 Wu, L.J., 186 Yu, W., 76
Wang, G.D., 26 Yuan, X., 76
Wang, J., 37 Xianghua, L., 53 Yuying, Y., 62
Wang, J.C., 45
Xiao, D.Z., 140
Wang, Q., 94 Ze-en, M., |
Xinbo, L., 144
Wang, R.F., 17 Zhan, M., 80
Wang, S.G., 68 Xu, D., 237 Zhang, J., 13
Wang, S.W., 126 Aw Ls 275 Zhang, M., 265
Xu, W., 259
Wang, W., 275 Zhang, M.Z., 30
Wang, Y., 111, 270 Xu, Y., 90 Zhang, R., 237
Wang, Y.T., 68 Zhang, S.H., 90
Wang, Y.Z., 17 Yan, H., 275 Zhang, Y., 111
Wang, Z.Q., 140 Yan, Y., 237 Zhenlong, W., 101
Wang, Z.R., 62 Yan YE, 13 Zhichu, H., 84
Wang, Z.T., 90 Yang, B., 30 Zhihao, J., 107
Wansheng, Z., 101 Yang, G.C., 202 Zhiliang, Z., 144
Weili, X., 62 Yang, H., 80 Zhong, J., 275
Wilshire, B., 316 Yang, S.Y., 133 Zhongqin, L., 62
Wu, H.C., 348 Yane; YY., 17 Zhu, Y., 94
Wu, L.-J., 151, 169 Yongming, K., | Zoqui, E.J., 365
Journalo f
Materials
Processing
Technology
Journal of Materials Processing Technology 120 (2002) 468-473 =
www.elsevier.com/locate/jmatprotec
Subject Index of Volume 120
Abductive network Blending
Optimum cooling system design of a free-form injection mold using A neural network approach to surface blending based on digitized
an abductive network, 226 points, 76
Algorithm Block interface
On-line quality monitoring in plasma-arc welding, 270 Effect of Si on the interfacial bonding strength of Al—Pb alloy
Aluminium alloy strips and hot-dip aluminized steel sheets by hot rolling,
Finite element simulation of warm deep drawing of aluminium 30
alloy sheet when accounting for heat conduction, 412 Bonding strength
Minimal lubrication machining of aluminium alloys, 327 Effect of Si on the interfacial bonding strength of Al—Pb alloy strips
Aluminium-silicon alloys and hot-dip aluminized steel sheets by hot rolling, 30
Macro- and microstructure analysis of SSM A356 produced by Bulge forming
electromagnetic stirring, 365 Near-net-shape manufacture of engineering components using
Aluminum matrix alloys bulge-forming processes: a review, 341
Influence of Al,O; or ZrO, particulate addition on the microstruc-
ture aspects of AINi and AISi alloys, 296 Casting
Analysis A technical note cupola efficiency improvement by increasing air
A technical note cupola efficiency improvement by increasing air blast temperature, 281
blast temperature, 281] Ceramic particulates
ANOVA Influence of Al,O; or ZrO, particulate addition on the microstruc-
A comparative experimental study of machining characteristics in ture aspects of AINi and AISi alloys, 296
vibratory, rotary and vibro-rotary electro-discharge machining, Ceramic tape casting
374 Power law fluids and Bingham plastics flow models for ceramic
Arc signals tape casting, 215
On-line quality monitoring in plasma-arc welding, 270 Citrate sol-gel method
Artificial neural networks Synthesis of Li;VO, by the citrate sol-gel method and its ionic
Application of neural computing in basic oxygen steelmaking, 310 conductivity, 21
Aspect ratio Clearance
A numerical study of solidification of n-hexadecane based on the Influence of the meshing clearance on the performance of conjugate
enthalpy formulation, 249 helical surfaces, 140
Coining
Bar Prediction and elimination of springback in straight flanging using
Simulation on temperature field of SOCrV4 automobile gear bar computer-aided design methods. Part 2: FEM predictions and
steel in continuous rolling by FEM, 26 tool design, 348
BaTiO; Combined processes
Power law fluids and Bingham plastics flow models for ceramic Process planning for laser-assisted forming, 322
tape casting, 215 Comminution process modeling
Binder hold down force Nonlinear comminution process modeling based on GA-FNN in
2D elasto-plastic FE simulation of the drawbead drawing process, 17 the computational comminution system, 84
Binder wrap Composites
Stamping and stamping simulation with a blankholder gap, 62 Influence of Al,O; or ZrO, particulate addition on the microstruc-
Bingham plastics ture aspects of AINi and AISi alloys, 296
Power law fluids and Bingham plastics flow models for ceramic Compression tests
tape casting, 215 Determination of metal material flow stress by the method of
B-L planar anisotropy yield function C-FEM, 144
The numerical analysis of anisotropic sheet metals in deep-drawing Compressor blade
processes, 45 Influence of the shape and position of the preform in the precision
Blank design forging of a compressor blade, 80
Research on applying one-step simulation to blank design in sheet Computational comminution
metal forming, 111 Nonlinear comminution process modeling based on GA-FNN in
Blank interface the computational comminution system, 84
Effect of Si on the interfacial bonding strength of Al—Pb alloy strips Conjugate
and hot-dip aluminized steel sheets by hot rolling, 30 Experimental validation of a quasi three-dimensional conjugate
Blankholder gap heat transfer model for the metering section of a single-screw
Stamping and stamping simulation with a blankholder gap, 62 plasticating extruder, 397
Elsevier Science B.V.
PII: S0924-0136(01)01238-9
Subject Index of Volume 120
Conjugate helical surfaces Enthalpy formulation
Influence of the meshing clearance on the performance of conjugate A numerical study of solidification of n-hexadecane based on the
helical surfaces, 140 enthalpy formulation, 249
Cooling system EPC
Optimum cooling system design of a free-form injection mold using Evaluation of the effect of vacuum on mold filling in the magnesium
an abductive network, 226 EPC process, 94
Cupola Expansion of stent
A technical note cupola efficiency improvement by increasing air Finite-element simulation of stent expansion, 335
blast temperature, 281 Experiment study
Cutting Experiment study on the variation of wall thickness during dieless
Examples of FEM application in manufacturing technology, 450 drawing of stainless steel tube, 90
3D non-linear FEM analysis Extremely thin elements
Manufacture of the die of an automobile deck part based on rapid Analysis of the non-steady state vertical—horizontal rolling process
prototyping and rapid tooling technology, 237 in roughing trains by the three-dimensional finite element
3D rigid—viscoplastic FEM method, 53
Influence of the shape and position of the preform in the precision
forging of a compressor blade, 80 FEM
Simulation on temperature field of SOCrV4 automobile gear bar
Decision making steel in continuous rolling by FEM, 26
Fuzzy-logic application in the structural optimisation of a support Variable blankholder force in U-shaped part forming for eliminat-
plate for electrical accumulator in a motor vehicle, 303 ing springback error, 259
Deep and small hole Prediction and elimination of springback in straight flanging using
Ultrasonic and electric discharge machining to deep and small hole computer-aided design methods. Part 2: FEM predictions and
on titanium alloy, 101 tool design, 348
Die material Shape optimisation using FEA software: a V-shaped anvil as an
The application of a turning tool as the electrode in electropolish- example, 426
ing, 6 FEM simulation
Die of automobile deck Determination of metal material flow stress by the method of C-
Manufacture of the die of an automobile deck part based on rapid FEM, 144
prototyping and rapid tooling technology, 237 Final holding time
Dieless drawing Induction heating process of an Al—Si aluminum alloy for semi-
Experiment study on the variation of wall thickness during dieless solid die casting and its resulting microstructure, 355
drawing of stainless steel tube, 90 Finite element method
Discrete Kirchhoff triangle plate shell element Analysis of the non-steady state vertical—horizontal rolling process
The numerical analysis of anisotropic sheet metals in deep-drawing in roughing trains by the three-dimensional finite element
processes, 45 method, 53
Drawbead Finite-element simulation of stent expansion, 335
2D elasto-plastic FE simulation of the drawbead drawing process, Examples of FEM application in manufacturing technology, 450
17 Finite element simulation
Drawbead restraining force Finite element simulation of warm deep drawing of aluminium
2D elasto-plastic FE simulation of the drawbead drawing process, alloy sheet when accounting for heat conduction, 412
17 Flange earing
Drawing The numerical analysis of anisotropic sheet metals in deep-drawing
Stamping and stamping simulation with a blankholder gap, 62 processes, 45
Drilling Flank wear
Minimal lubrication machining of aluminium alloys, 327 Topography of the flank wear surface, 243
Flexible manufacturing system
Electro-discharge machining Petri net models applied to analyze automatic sequential pressing
A comparative experimental study of machining characteristics in systems, 115
vibratory, rotary and vibro-rotary electro-discharge machining, Flow stress
374 Determination of metal material flow stress by the method of C-
Examples of FEM application in manufacturing technology, 450 FEM, 144
Electromagnetic interference Forming
Fracture types and thickness distribution in superplastic sheets Forming of seamless pipe fittings, 432
formed with plastic injection molding, 133 Friction test
Electromagnetic stirring : An experimental study on forming characteristics of pre-coated
Macro- and microstructure analysis of SSM A356 produced by sheet metals, 290
electromagnetic stirring, 365 Front side
Electron microscopy On-line quality monitoring in plasma-are welding, 270
Improvement of the magnetic properties of nanocomposite perma- Fuzzy controller
nent magnetic alloys with Dy and Ga substitutions, 265 Fuzzy control of a heat-bending system, 186
Electroplastic effect Fuzzy logic
Effect of current pulses on the drawing stress and properties of Fuzzy-logic application in the structural optimisation of a support
Crl17Ni6Mn3 and 4J42 alloys in the cold-drawing process, 13 plate for electrical accumulator in a motor vehicle, 303
Electropolishing Fuzzy neural network
The application of a turning tool as the electrode in electropolish- Nonlinear comminution process modeling based on GA-FNN in
ing, 6 the computational comminution system, 84
470 Subject Index of Volume 120
Fuzzy theory Laser forming
An image tracking system for welded seams using fuzzy logic, Process planning for laser-assisted forming, 322
169 Laser micro-welding
A study on the prediction of the laser weld shape with varying heat
Genetic algorithm source equations and the thermal distortion of a small structure
Nonlinear comminution process modeling based on GA-FNN in in micro-joining, 208
the computational comminution system, 84 Li;VO,
Grey theory Synthesis of Li;VO, by the citrate sol-gel method and its ionic
Prediction of heat-affected zone using Grey theory, 151 conductivity, 21
Grinding
Examples of FEM application in manufacturing technology, Macro-segregation
450 Induction heating process of an Al-Si aluminum alloy for semi-
solid die casting and its resulting microstructure, 355
Heat bending Macrostructure
Fuzzy control of a heat-bending system, 186 Macro- and microstructure analysis of SSM A356 produced by
Heat source equation electromagnetic stirring, 365
A study on the prediction of the laser weld shape with varying heat Magnesium alloy
source equations and the thermal distortion of a small structure Evaluation of the effect of vacuum on mold filling in the magnesium
in micro-joining, 208 EPC process, 94
Heat transfer model Magnetic materials
Experimental validation of a quasi three-dimensional conjugate Improvement of the magnetic properties of nanocomposite perma-
heat transfer model for the metering section of a single-screw nent magnetic alloys with Dy and Ga substitutions, 265
plasticating extruder, 397 Manufacturing technolog
Heat-affected zone Examples of FEM application in manufacturing technology, 450
Prediction of heat-affected zone using Grey theory, 151 MARC
Heating Shape optimisation using FEA software: a V-shaped anvil as an
Forming of seamless pipe fittings, 432 example, 426
Hemming Martensite transformation
Prediction and elimination of springback in straight flanging using A study on the wear behavior of hardened medium carbon steel, 126
computer-aided design methods. Part 2: FEM predictions and Mathematical model
tool design, 348 A study on a virtual manufacturing model of a revolving milling
n-Hexadecane cutter in 2-axis numerical control processing, 68
A numerical study of solidification of n-hexadecane based on the Mathematical modelling
enthalpy formulation, 249 Some fundamental considerations for the control of residual flat-
Hot working ness in tension levelling, 385
Forming of seamless pipe fittings, 432 Mechanical properties
HSLA The challenge to produce consistent mechanical properties in Nb-
The challenge to produce consistent mechanical properties in Nb- HSLA strip steels, 316
HSLA strip steels, 316 Meshing clearance
Influence of the meshing clearance on the performance ofc onjugate
Image tracking of welded seams helical surfaces, 140
An image tracking system for welded seams using fuzzy logic, 169 Metal forming
Imaginary flow channel Examples of FEM application in manufacturing technology, 450
Power law fluids and Bingham plastics flow models for ceramic Metering section
tape casting, 215 Experimental validation of a quasi three-dimensional conjugate
Induction heating process heat transfer model for the metering section of a single-screw
Induction heating process of an Al-Si aluminum alloy for semi- plasticating extruder, 397
solid die casting and its resulting microstructure, 355 Micro-EDM
Initial liquid superheat Ultrasonic and electric discharge machining to deep and small hole
A numerical study of solidification of n-hexadecane based on the on titanium alloy, 101
enthalpy formulation, 249 Microstructural evolution
Injection molding Forming of seamless pipe fittings, 432
Computer simulation of transport processes during injection mold- Microstructure
filling and optimization of the molding conditions, 438 Improvement of the magnetic properties of nanocomposite perma-
Intermetallic compound nent magnetic alloys with Dy and Ga substitutions, 265
Effect of Si on the interfacial bonding strength of Al—Pb alloy strips Macro- and microstructure analysis of SSM A356 produced by
and hot-dip aluminized steel sheets by hot rolling, 30 electromagnetic stirring, 365
Ionic conductivity Microstructure transmissibility
Synthesis of Li;VO, by the citrate sol-gel method and its ionic Microstructure transmissibility in preparing SiC ceramics from
conductivity, 21 natural wood, 107
Mindlin curve element
Just in time Section analysis of industrial sheet-metal stamping processes, 37
Petri net models applied to analyze automatic sequential pressing Minimal lubrication
systems, 115 Minimal lubrication machining of aluminium alloys, 327
Mold filling
KMAS-2D Evaluation of the effect of vacuum on mold filling in the magnesium
Section analysis of industrial sheet-metal stamping processes, 37 EPC process, 94
Subject Index of Volume 120
Multi-line heating Process optimisation
Fuzzy control of a heat-bending system, 186 A technical note cupola efficiency improvement by increasing air
Multiple drawing blast temperature, 281
Stamping and stamping simulation with a blankholder gap, 62 Process planning
Process planning for laser-assisted forming, 322
Nanostructures Process simulation
Improvement of the magnetic properties of nanocomposite perma- Near-net-shape manufacture of engineering components using
nent magnetic alloys with Dy and Ga substitutions, 265 bulge-forming processes: a review, 341
Natural convection Production engineering
A numerical study of solidification of n-hexadecane based on the Examples of FEM application in manufacturing technology, 450
enthalpy formulation, 249 Pseudo shape function
Nb Analysis of the non-steady state vertical—horizontal rolling process
The challenge to produce consistent mechanical properties in Nb- in roughing trains by the three-dimensional finite element
HSLA strip steels, 316 method, 53
Neural networks
A neural network approach to surface blending based on digitized Quality monitoring
points, 76 On-line quality monitoring in plasma-are welding, 270
A neural network approach for solution of the inverse problem for Quasi-flow corner theory
selection of powder metallurgy materials, 419 The numerical analysis of anisotropic sheet metals in deep-drawing
Nucleation inhibition processes, 45
Development of a nucleation inhibitive coated mold for the rapid Quench
solidification of superalloy melt, 202 A study on the wear behavior of hardened medium carbon steel, 126
Numerical analysis
A study on the prediction of the laser weld shape with varying heat Rapid prototyping
source equations and the thermal distortion of a small structure Manufacture of the die of an automobile deck part based on rapid
in micro-joining, 208 prototyping and rapid tooling technology, 237
Numerical control processing Rapid solidification
A study on a virtual manufacturing model of a revolving milling Development of a nucleation inhibitive coated mold for the rapid
cutter in 2-axis numerical control processing, 68 solidification of superalloy melt, 202
Numerical simulation Rapid tooling
Computer simulation of transport processes during injection mold- Manufacture of the die of an automobile deck part based on rapid
filling and optimization of the molding conditions, 438 prototyping and rapid tooling technology, 237
Rectangular deep drawing test
One-step simulation An experimental study on forming characteristics of pre-coated
Research on applying one-step simulation to blank design in sheet sheet metals, 290
metal forming, | 11 Regression
Optimisation A comparative experimental study of machining characteristics in
Shape optimisation using FEA software: a V-shaped anvil as an vibratory, rotary and vibro-rotary electro-discharge machining,
example, 426 374
Residual magnetization
Partial fluid lubrication Effect of current pulses on the drawing stress and properties of
Industrial experiments and findings on temper rolling chatter, Cr17Ni6Mn3 and 4J42 alloys in the cold-drawing process, 13
215 Resulting microstructure
Perovskites Induction heating process of an Al-Si aluminum alloy for semi-
Power law fluids and Bingham plastics flow models for ceramic solid die casting and its resulting microstructure, 355
tape casting, 215 Reverse problem
Petri net A study on a virtual manufacturing model of a revolving milling
Petri net models applied to analyze automatic sequential pressing cutter in 2-axis numerical control processing, 68
systems, 115 Revolving milling cutter
Plasma-arce welding A study on a virtual manufacturing model of a revolving milling
On-line quality monitoring in plasma-arc welding, 270 cutter in 2-axis numerical control processing, 68
Powder metallurgy Rheocast
A neural network approach for solution of the inverse problem for Macro- and microstructure analysis of SSM A356 produced by
selection of powder metallurgy materials, 419 electromagnetic stirring, 365
Precision casting Rolling interface
Manufacture of the die of an automobile deck part based on rapid Industrial experiments and findings on temper rolling chatter, 275
prototyping and rapid tooling technology, 237 Root pass welding
Pre-coated sheet metal An optical sensing system for seam tracking and weld pool control
An experimental study on forming characteristics of pre-coated in gas metal arc welding of steel pipe, 458
sheet metals, 290
Preform Saturated magnetization
Influence of the shape and position of the preform in the precision Effect of current pulses on the drawing stress and properties
forging of a compressor blade, 80 of Cr17Ni6Mn3 and 4J42 alloys in the cold-drawing process,
Process control 13
Application of neural computing in basic oxygen steelmaking, 310 Seam tracking
Near-net-shape manufacture of engineering components using An optical sensing system for seam tracking and weld pool control
bulge-forming processes: a review, 341 in gas metal arc welding of steel pipe, 458
472 Subject Index of Volume 120
Seamless fittings Springback
Forming of seamless pipe fittings, 432 Variable blankholder force in U-shaped part forming for eliminat-
Selection of materials ing springback error, 259
A neural network approach for solution of the inverse problem for Prediction and elimination of springback in straight flanging using
selection of powder metallurgy materials, 419 computer-aided design methods. Part 2: FEM predictions and
Semi-solid die casting tool design, 348
Induction heating process of an Al-Si aluminum alloy for semi- Square cup drawing
solid die casting and its resulting microstructure, 355 The numerical analysis of anisotropic sheet metals in deep-drawing
Set-up cost processes, 45
Petri net models applied to analyze automatic sequential pressing Stainless steel tube
systems, 115 Experiment study on the variation of wall thickness during dieless
Set-up time drawing of stainless steel tube, 90
Petri net models applied to analyze automatic sequential pressing Statistical process control
systems, 115 Some fundamental considerations for the control of residual flat-
Sheet metal ness in tension levelling, 385
Process planning for laser-assisted forming, 322 Steelmaking
Sheet metal flanging Application of neural computing in basic oxygen steelmaking,
Prediction and elimination of springback in straight flanging using 310
computer-aided design methods. Part 2: FEM predictions and Steels
tool design, 348 The challenge to produce consistent mechanical properties in Nb-
Sheet metal forming HSLA strip steels, 316
An simulation technology of sheet-metal forming with trial-and- Stretching
error contact algorithm, | Shape optimisation using FEA software: a V-shaped anvil as an
Research on applying one-step simulation to blank design in sheet example, 426
metal forming, 111 Structural optimisation
Finite element simulation of warm deep drawing of aluminium Fuzzy-logic application in the structural optimisation of a support
alloy sheet when accounting for heat conduction, 412 plate for electrical accumulator in a motor vehicle, 303
Sheet-metal stamping process Superalloy
Section analysis of industrial sheet-metal stamping processes, Development of a nucleation inhibitive coated mold for the rapid
37 solidification of superalloy melt, 202
SiC Superplastic injection molding
Microstructure transmissibility in preparing SiC ceramics from Fracture types and thickness distribution in superplastic sheets
natural wood, 107 formed with plastic injection molding, 133
Simulation Surface
Finite-element simulation of stent expansion, 335 A neural network approach to surface blending based on digitized
Simulation annealing (SA) points, 76
Optimum cooling system design of a free-form injection mold using Surface topography
an abductive network, 226 Topography of the flank wear surface, 243
Simulation technology
An simulation technology of sheet-metal forming with trial-and- Temper rolling chatter
error contact algorithm, 1 Industrial experiments and findings on temper rolling chatter, 275
Single-screw plasticating extruder Temperature distribution
Experimental validation of a quasi three-dimensional conjugate Prediction of heat-affected zone using Grey theory, 151
heat transfer model for the metering section of a single-screw Temperature field
plasticating extruder, 397 Simulation on temperature field of 50CrV4 automobile gear bar
$i0.-ZrO.-B>0; coating mold steel in continuous rolling by FEM, 26
Development of a nucleation inhibitive coated mold for the rapid Tension levelling
solidification of superalloy melt, 202 Some fundamental considerations for the control of residual flat-
Sliding wear ness in tension levelling, 385
A study on the wear behavior of hardened medium carbon steel, Thermal diffusivity
126 Influence of Al,O; or ZrO; particulate addition on the microstruc-
Small structure ture aspects of AINi and AISi alloys, 296
A study on the prediction of the laser weld shape with varying heat Thickness ratio
source equations and the thermal distortion of a small structure Fracture types and thickness distribution in superplastic sheets
in micro-joining, 208 formed with plastic injection molding, 133
Sol-gel processing Three-step reheating
Development of a nucleation inhibitive coated mold for the rapid Induction heating process of an Al—Si aluminum alloy for semi-
solidification of superalloy melt, 202 solid die casting and its resulting microstructure, 355
Solid fraction Titanium alloy
Induction heating process of an Al-Si aluminum alloy for semi- Ultrasonic and electric discharge machining to deep and small hole
solid die casting and its resulting microstructure, 355 on titanium alloy, 101
Solidification phase fronts Tool design
A numerical study of solidification of n-hexadecane based on the The application of a turning tool as the electrode in electropolish-
enthalpy formulation, 249 ing, 6
Solid-state reaction method Transport processes
Synthesis of Li;VO, by the citrate sol-gel method and its ionic Computer simulation of transport processes during injection mold-
conductivity, 21 filling and optimization of the molding conditions, 438
Subject Index of Volume 120
Trial-and-error contact algorithm Visual sensing
An simulation technology of sheet-metal forming with trial-and- An optical sensing system for seam tracking and weld pool control
error contact algorithm, | in gas metal arc welding of steel pipe, 458
Tribology V-shaped die
Examples of FEM application in manufacturing technology, 450 Shape optimisation using FEA software: a V-shaped anvil as an
Turning operation example, 426
Topography of the flank wear surface, 243
Turning-tool electrode Wall thickness
The application of a turning tool as the electrode in electropolish- Experiment study on the variation of wall thickness during dieless
ing, 6 drawing of stainless steel tube, 90
Warm deep drawing
Ultrasonic vibration Finite element simulation of warm deep drawing of aluminium
Ultrasonic and electric discharge machining to deep and small hole alloy sheet when accounting for heat conduction, 412
on titanium alloy, 101 Warm forging
A comparative experimental study of machining characteristics in Determination of metal material flow stress by the method of
vibratory, rotary and vibro-rotary electro-discharge machining, C-FEM, 144
374 Weld pool control
U-shaped part An optical sensing system for seam tracking and weld pool control
Variable blankholder force in U-shaped part forming for eliminat- in gas metal arc welding of steel pipe, 458
ing springback error, 259 Welded seam
An image tracking system for welded seams using fuzzy logic,
Vacuum 169
Evaluation oft he effect of vacuum on mold filling in the magnesium Woodceramics
EPC process, 94 Microstructure transmissibility in preparing SiC ceramics from
Variable blankholder force natural wood, 107
Variable blankholder force in U-shaped part forming for eliminat-
ing springback error, 259 X-ray diffraction
Vertical-horizontal rolling Improvement of the magnetic properties of nanocomposite perma-
Analysis of the non-steady state vertical—horizontal rolling process nent magnetic alloys with Dy and Ga substitutions, 265
in roughing trains by the three-dimensional finite element
method, 53 Zero inventory
Virtual manufacture Petri net models applied to analyze automatic sequential pressing
A study on a virtual manufacturing model of a revolving milling systems, 115
cutter in 2-axis numerical control processing, 68 Zn-2% Al
Viscous slip Fracture types and thickness distribution in superplastic sheets
Industrial experiments and findings on temper rolling chatter, 275 formed with plastic injection molding, 133