Table Of Content

Journal of Materials Processing Technology R Journal of Materials Processing Technology 111 (2001) 295-296 www.elsevier.com/locate/jmatprotec Author Index of Volume 111 Abe, F., 210 Li... 31 Ahn, J.H., 273 Joo, Y.S., 204 Liu, Y.J., 142 Alinger, M.J., 20 Jung, B.L., Ameyama, K., 118 Jung, C.H., Masaki, S., 113 Arimoto, K., 2 Jung, H.K., 37 Matsumoto, M., 210 Atkinson, H.V., 31 Jung, K.W., 37 Modigell, M., 53 Jung, Y.-H., 250 Moon, Y.H., 74, 146 Bae, W.B., 135 Jung-Hwan, L., 42 Moslemi Naeini, H., 193 Barlat, F., 170 JurkoSek, B., 279 Miiller, K., 122 Cai, G.Q., 261, 269 Kakino, Y., 240 Na, Y.S., 98 Cho, J.R., 204 Kang, B.S., 90 Nakagawa, H., 240 Choi, H.H., 90 Kang, C.G., 37 Nardin, B., 279 Choi, H.Z., 265 Kang, M.C., 256, 2 Neudenberger, D., 48 Choi, J.C., 188 Kang, Y.S., 25 Choi, Y., 164 Kapranos, P., 31 OneS1 2: VIS Christodoulou, P., 286 Kato, K., 198, 219 Okamoto, M., 198 Chun, M.S., 146 Keum, Y.T., 155 Chung, Y.H., 219 Kim, B.M., 127, 188 Osakada, K., 210 Otake, N., 219 Kim, C., 188 Dean, T.A., 10 Kim, E.G., 225, Doege, E., 182 Kim, H.Y., Park, C.H., 233 Kim, I.S., 98 Park, J.H., 103 Elend, L.-E., 182 Kim, J.B., Kim, J.H., 15: Frazier, W.G., 107 Kim, J.-S., 2 Furuike, H., 240 Kim, MLS., 8:5 Kim, N.K., 261, 269 Ranatunga, V., I¢( )7 Ghoo, B.Y., 155 Kim, P.H., Gunasekera, J.S., 107 Kim, S.H.., Sang- Yong, L., 42 Kim, S.R., Seo, D., 164 Haga, T., 64 Kim, S.W., Shi, H.S., 79 Han, T.K., 69 Kim, Y.H., ‘ Shima, S., 113 Heo, Y., 164 Kirkwood, D.H., 31 Shintani, K., 193 Hirogaki, T., 240 Kita, Y., 240 Shiomi, M., 210 Hirohata, T., 113 Kiuchi, M., 193 Suehiro, Y., 118 Hong, S.J., 135 Ko, Dee... 127 Sun, D.S., 79 Hong, W.K., 74 Ko, S.-L., 244 Hu, M., 269 Koke, J., 53 Tamura, M., 132 Hu, Z.M., 10 Konnerth, U., 159 Tieu, A.K., 142 Hur, K.-D., 107 Kopp, R., 48 Hwang, B.C., 135 Kovac, M., 279 Uematsu, K., 210 Hwang, S.M., 90, 250 Ku, T.W., 90 Kunoh, T., 132 Ilyas, I.P., 286 Kuzman, K., 279 Van Tyne, C.J., 20 Iseki, H., 150 Kwon, T.H., 214 Wang, D.D., 142 Jeon, B.-h., 175 Lee, Wang, Q.M., 269 Jeong, H.D., 261, 265 Lee, S. Watanabe, K., 132 Jeong, H.S., 204 Lee; 'S: Winning, G., 48 Jeong, J.H., 59 Lee, S. Wu, J.S., 79 Jin, T., 261 Lee, Wu, W.T., 2 Jin, Y.E., 103 Lee, Jo) FH, 127 Lim, Xu, H.B., 79 Elsevier Science B.V. PII: S0924-0136(01)00689-6 296 Author Index of Volume Yamaya, K., 132 Yeom, J.T., 98 Young-Seon, L., 42 Yang, D.Y., 25, 59, 170 Yi, J.J., 74, 146 Yuen, W.Y.D., 142 Yang, J.-b., 175 Yoo, Y.E., 233 Yarlagadda, P.K.D.V., 286 Yoon, J.S., 85 Zhang, J.G., 79 Yasuhara, T., 198 Yoon, J.W., 170 Journal of Materials Processing lf ‘ay Technology ELSEVIER Journal of Materials Processing Technology 111 (2001) 297-302 www.elsevier.com/locate/jmatprotec Subject Index of Volume 111 A356 Bifurcation Electromagnetic stirring and Sr modification in A356 alloy, Investigation into wrinkling behavior in the elliptical cup deep 69 drawing process by finite element analysis using bifurcation A2 tool steel theory, 170 Evolution of the tribological characteristics of several forming die Birefringence materials, 20 Modeling and numerical simulation of residual stresses and bire- Acoustic emission (AE) fringence in injection molded center-gated disks, 214 Process monitoring of centerless grinding using acoustic emission, Blanking 213 Development of an integrated computer-aided process planning Adaptive grid system for press working products, 188 Application of an adaptive grid refinement technique to three- Boundary condition dimensional finite element analysis of the filling stage in the Aspects of forging of titanium alloys and the production of blade die-casting process, 59 forms, 10 AE monitoring system Brazeability Process monitoring of centerless grinding using acoustic emission, Fabrication and brazeability of a three-layer 4343/3003/4343 alu- 273 minum clad sheet by rolling, 85 7075 Al Broadside rolling Characterization ofA l 7075 alloys after cold working and heating in Application of neural networks to predict the width variation in a the semi-solid temperature range, 42 plate mill, 146 (Al, Ti)N-coated carbide tool Basic study of ball end milling on hardened steel, 240 CAD/CAM Alloy 718 Chip load prediction in ball-end milling, 250 Hot forging of a nickel-base superalloy, 98 CCT diagram Aluminum brazing sheet Microstructure and properties of spray formed Cr,.MoV steel for Fabrication and brazeability of a three-layer 4343/3003/4343 alu- rolls, 79 minum clad sheet by rolling, 85 Centerless grinding Aluminum-killed drawing quality (AKDQ) sheet steel Process monitoring of centerless grinding using acoustic emission, Evolution of the tribological characteristics of several forming die 213 materials, 20 Ceramic injection molding Approximate deformation analysis Melt front surface asperity and welding-defect generation in cera- An approximate deformation analysis and FEM analysis for the mic injection molding, 219 incremental bulging of sheet metal using a spherical roller, Closed-die forging 150 Use of UBET for design of flash gap in closed-die forging, 107 Arbitrary Lagrangian—Eulerian description Cold roll forming Integrated finite element simulation for the hot extrusion of com- Computer aided design of rolls for reshaping processes from round plicated Al alloy profiles, 25 pipes to “channel-type”™ pipes, 193 Automotive condenser Cold rolling Fabrication and brazeability of a three-layer 4343/3003/4343 alu- Fabrication and brazeability of a three-layer 4343/3003/4343 aluminum clad sheet by rolling, 85 minum clad sheet by rolling, 85 Axisymmetric dies Friction measurement in cold rolling, 142 Use of UBET for design of flash gap in closed-die forging, Cold working methods 107 Characterization of Al 7075 alloys after cold working and heating in the semi-solid temperature range, 42 Backward deformation analysis Compressed chilly-air system Computer aided design of rolls for reshaping processes from round Evaluation of machinability by cutting environments in high-speed pipes to “‘channel-type” pipes, 193 milling of difficult-to-cut materials, 256 Backward tracing scheme Compressed cold air Implementation of backward tracing scheme of the FEM to blank A comparison of the cooling effects of compressed cold air and design in sheet metal forming, 90 coolant for cylindrical grinding with a CBN wheel, 265 Ball end milling Compressible viscoplasticity Basic study of ball end milling on hardened steel, 240 The Al-powder forging process: its finite element analysis, 204 Bead-exit thinning Compression molding Application of an expert drawbead model to the finite element A study on fiber orientation in the compression molding of fibe1 simulation of sheet forming processes, 155 reinforced polymer composite material, 243232 Elsevier Science B.V. PIT: S0924-0136(01)00690-2 298 Subject Index of Volume 111 Copper powder Drawbead Experiment on metal powder compaction by differential speed Application of an expert drawbead model to the finite element rolling, 113 simulation of sheet forming processes, 155 Cost and time savings Drawbead restraining force A hydraulic high-speed tryout press for the simulation of mechan- Application of an expert drawbead model to the finite element ical forming processes, 159 simulation of sheet forming processes, 155 Counter-flow joining Drawing Melt front surface asperity and welding-defect generation in cera- A hydraulic high-speed tryout press for the simulation of mechan- mic injection molding, 219 ical forming processes, 159 Cr;2MoV Dressing process Microstructure and properties of spray formed Cr,.MoV steel for Process monitoring of centerless grinding using acoustic emission, rolls, 79 273 Cutting force Drive system Basic study of ball end milling on hardened steel, 240 A hydraulic high-speed tryout press for the simulation of mechan- Improvement of the accuracy in the machining of a deep shoulder ical forming processes, 159 cut by end milling, 244 Dynamic recrystallization Chip load prediction in ball-end milling, 250 Hot forging of a nickel-base superalloy, 98 Cutting surface model Dynamics Chip load prediction in ball-end milling, 250 A study on the kinematics and dynamics of a 3-DOF parallel machine tool, 269 Deep drawing Characteristics of weld line movements for the deep drawing with Electromagnetic stirring drawbeads of tailor-welded blanks, 164 Electromagnetic stirring and Sr modification in A356 alloy, 69 Deep drawing process End mill Design and application of pliable blank holder systems for the Improvement of the accuracy in the machining of a deep shoulder optimization of process conditions in sheet metal forming, cut by end milling, 244 182 Energy partition Deformation resistance Study on heat transfer in super-high-speed grinding: energy parti- Extrusion of nickel-titanium alloys Nitinol to hollow shapes, tion to the workpiece in HEDG, 261 122 Eutectic Si Density relaxation Electromagnetic stirring and Sr modification in A356 alloy, 69 Modeling and numerical simulation of residual stresses and bire- Expert model fringence in injection molded center-gated disks, 214 Application of an expert drawbead model to the finite element Development simulation of sheet forming processes, 155 A hydraulic high-speed tryout press for the simulation of mechan- Extruded length ical forming processes, 159 An UBET analysis of the non-axisymmetric extrusion/forging Die process, 135 A hydraulic high-speed tryout press for the simulation of mechan- Extrusion/forging ical forming processes, 159 An UBET analysis of the non-axisymmetric extrusion/forging Die lands process, 135 Integrated finite element simulation for the hot extrusion of com- plicated Al alloy profiles, 25 FEM Die materials An approximate deformation analysis and FEM analysis for the Evolution of the tribological characteristics of several forming die incremental bulging of sheet metal using a spherical roller, 150 materials, 20 FEM-simulation Die temperature Design and application of pliable blank holder systems for the Thixoforming of an aluminum component with a die designed by optimization of process conditions in sheet metal forming, 182 process simulation, 37 Fiber orientation Die-casting process study on fiber orientation in the compression molding of fiber Application of an adaptive grid refinement technique to three- reinforced polymer composite material, 233 dimensional finite eleinent analysis of the filling stage in the orientation function die-casting process, 59 study on fiber orientation during the injection molding of fiber- Differential speed rolling reinforced polymeric composites. (Comparison between image Experiment on metal powder compaction by differential speed processing results and numerical simulation), 225 rolling, 113 Fiber separation Difficult-to-cut materials study on fiber orientation in the compression molding of fiber Evaluation of machinability by cutting environments in high-speed reinforced polymer composite material, 233 milling of difficult-to-cut materials, 256 Filling stage 3-DOF Application of an adaptive grid refinement technique to three- A study on the kinematics and dynamics of a 3-DOF parallel dimensional finite element analysis of the filling stage in the machine tool, 269 die-casting process, 59 Domain decomposition Finishing rolling Integrated finite element simulation for the hot extrusion of com- Application of neural networks to predict the width variation in a plicated Al alloy profiles, 25 plate mill, 146 Down milling Finite element method Improvement of the accuracy in the machining of a deep shoulder Integrated finite element simulation for the hot extrusion of com- cut by end milling, 244 plicated Al alloy profiles, 25 Subject Index f Volume 111 Implementation of backward tracing scheme of the FEM to blank Heat transfer design in sheet metal forming, 90 Study on heat transfer in super-high-speed grinding: energy parti- A study on the optimal tool shape design in a hot forming process tion to the workpiece in HEDG, 261 127 High speed machining Investigation into wrinkling behavior in the elliptical cup deep Evaluation of machinability by cutting environments in high-speed drawing process by finite element analysis using bifurcation milling of difficult-to-cut materials, 256 theory, 170 The integration of rapid prototyping and CAE in mould manufac- Finite element simulation turing, 279 Aspects of forging of titanium alloys and the production of blade Hot extrusion forms, 10 Integrated finite element simulation for the hot extrusion of com- Application of an expert drawbead model to the finite element plicated Al alloy profiles, 25 simulation of sheet forming processes, 155 Extrusion of nickel-titanium alloys Nitinol to hollow shapes, 122 Flash gap Hot forging Use of UBET for design of flash gap in closed-die forging, 107 Characterization of Al 7075 alloys after cold working and heating in Flexible forming the semi-solid temperature range, 42 An approximate deformation analysis and FEM analysis for the Development of an integrated computer-aided process planning incremental buiging of sheet metal using a spherical roller, system for press working products, 188 150 Hot strip mill Flow guide Hot strip width control method by using looper tension measuring Integrated finite element simulation for the hot extrusion of com- system in finishing mill, 74 plicated Al alloy profiles, 25 Hot-dipped galvanized sheet steel Forging Evolution of the tribological characteristics of several forming die Aspects of forging of titanium alloys and the production of blade materials, 20 forms, 10 Hydraulic high-speed tryout press Hot forging of a nickel-base superalloy, 98 \ hydraulic high-speed tryout press for the simulation of mechan- Forming behaviour ical forming processes, 159 A hydraulic high-speed tryout press for the simulation of mechanical forming processes, 159 Image processing Forming load A study on fiber orientation during the injection molding of fiber- An UBET analysis of the non-axisymmetric extrusion/forging reinforced polymeric composites. (Comparison between image process, 135 processing results and numerical simulation), 225 Forming parameters Inclined angle Experimental investigation of the forming parameters of the rota- Study on heat transfer in super-high-speed grinding: energy parti- tional upset forging process, 103 tion to the workpiece in HEDG, 261 Forward deforamtion analysis Incremental forming Computer aided design of rolls for reshaping processes from round An approximate deformation analysis and FEM analysis for the pipes to “channel-type” pipes, 193 incremental bulging of sheet metal using a spherical roller, Forward slip 150 Friction measurement in cold rolling, 142 Injection molding Free volume theory Modeling and numerical simulation of residual stresses and bire- Modeling and numerical simulation of residual stresses and birefringence in injection molded center-gaied disks, 214 fringence in injection molded center-gated disks, 214 A study on fiber orientation during the injection molding of fiber- Friction reinforced polymeric composites. (Comparison between image Evolution of the tribological characteristics of several forming die processing results and numerical simulation), 225 materials, 20 Injection moulding simulations Friction measurement in cold rolling, 142 The integration of rapid prototyping and CAE in mould manufacturing, 279 Galvannealed sheet steel Intermediate annealing Evolution of the tribological characteristics of several forming die Fabrication and brazeability of a three-layer 4343/3003/4343 alu- materials, 20 minum clad sheet by rolling, 85 Grain size control Hot forging of a nickel-base superalloy, 98 Jetting in sprue Grinding Melt front surface asperity and welding-defect generation in cera- Study on heat transfer in super-high-speed grinding: energy parti- mic injection molding, 219 tion to the workpiece in HEDG, 261 Joining Grinding speed Method of joining sheets by using new type rivets, 198 Study on heat transfer in super-high-speed grinding: energy parti- Joining strength tion to the workpiece in HEDG, 261 Method of joining sheets by using new type rivets, 198 Grinding state monitoring Joint making property Process monitoring of centerless grinding using acoustic emission, Method of joining sheets by using new type rivets, 198 7273 KAVF Hardenability An UBET analysis of the non-axisymmetric extrusion/forging Microstructure and properties of spray formed Cr;.MoV steel for process, 135 rolls, 79 Kinematics Hardened steel A study on the kinematics and dynamics of a 3-DOF parallel Basic study of ball end milling on hardened steel, 240 machine tool, 269 300 Subject Index of Volume 11] Knowledge-based rules Nitinol Development of an integrated computer-aided process planning Extrusion of nickel-titanium alloys Nitinol to hollow shapes, system for press working products, 188 122 Non-dendritic alloy slurries Laser Investigation into the rapid compression of semi-solid alloy slugs, The manufacturing of hard tools from metallic powders by selective 31 laser melting, 210 Non-equilibrium PM process Laser w elding Formation of a TiN/TisSi; nano-grain composite by a non-equili- Characteristics of weld line movements for the deep drawing with brium PM process, 118 drawbeads of tailor-welded blanks, 164 Non-linear spring characteristic Liquid segregation Development of a new-type suspension spring for rally cars, Thixoforming of an aluminum component with a die designed by 132 process simulation, 37 Non-traditional machining Long fiber-reinforced polymeric composites An approximate deformation analysis and FEM analysis for the A study on fiber orientation during the injection molding of fiber- incremental bulging of sheet metal using a spherical roller, 150 reinforced polymeric composites. (Comparison between image Numerical simulation processing results and numerical simulation), 225 A study on fiber orientation during the injection molding of fiber- Looper control reinforced polymeric composites. (Comparison between image Hot strip width control method by using looper tension measuring processing results and numerical simulation), 225 system in finishing mill, 74 Optimal tool shape Z-map A study on the optimal tool shape design in a hot forming process, Chip load prediction in ball-end milling, 250 127a rd Marker surface method Orientation tensor Application of an adaptive grid refinement technique to three- A study on fiber orientation in the compression molding of fiber dimensional finite element analysis of the filling stage in the die-casting process, 59 reinforced polymer composite material, 233 Overflow position Mechanical alloying (MA) Thixoforming of an aluminum component with a die designed by Formation of a TiN/TisSi; nano-grain composite by a non-equili- process simulation, 37 brium PM process, 118 Mechanical properties Parallel machine tool Characterization of Al 7075 alloys after cold working and heating in A study on the kinematics and dynamics of a 3-DOF parallel the semi-solid temperature range, 42 machine tool, 269 Melt drag belt-roll caster Plastic working Semi-solid roll casting of aluminum alloy strip by melt drag twin Method of joining sheets by using new type rivets, 198 roll caster, 64 Plate mill Melt drag twin roll caster Application of neural networks to predict the width variation in a Semi-solid roll casting of aluminum alloy strip by melt drag twin plate mill, 146 roll caster, 64 Pliable blank holder Melt front asperity Design and application of pliable blank holder systems for the Melt front surface asperity and welding-defect generation in cera- optimization of process conditions in sheet metal forming, 182 mic injection molding, 219 Porthole die Melting Integrated finite element simulation for the hot extrusion of com- The manufacturing of hard tools from metallic powders by selective plicated Al alloy profiles, 25 laser melting, 210 Powder forging process Meta-dynamic recrystallization The Al-powder forging process: its finite element analysis, 204 Hot forging of a nickel-base superalloy, 98 Powder forming Metal forming process Experiment on metal powder compaction by differential speed A study on the optimal tool shape design in a hot forming process, 127 rolling, 113 Preform design Metallic powders Implementation of backward tracing scheme of the FEM to blank The manufacturing of hard tools from metallic powders by selective design in sheet metal forming, 90 laser melting, 210 Press characteristics Microstructure A hydraulic high-speed tryout press for the simulation of mechan- Microstructure and properties of spray formed Cr,,MoV steel for ical forming processes, 159 rolls, 79 Pressing force Characterization of Al 7075 alloys after cold working and heating in Thixoforming of an aluminum component with a die designed by the semi-solid temperature range, 42 process simulation, 37 Mismatching refinement Process design Integrated finite element simulation for the hot extrusion of com- Computer aided design of rolls for reshaping processes from round plicated Al alloy profiles, 25 pipes to “‘channel-type” pipes, 193 Neural network Production Application of neural networks to predict the width variation in a The integration of rapid prototyping and CAE in mould manufac- plate mill, 146 turing, 279 Nickel electroforming Rapid compression Development of rapid tooling for sheet metal drawing using nickel Investigation into the rapid compression of semi-solid alloy slugs, electroforming and stereolithography processes, 286 31 Subject Index of Volume 111 Rapid prototyping Sheet metal forming The manufacturing of hard tools from metallic powders by selective Implementation of backward tracing scheme of the FEM to blank laser melting, 210 design in sheet metal forming, 90 The integration of rapid prototyping and CAE in mould manufac- An approximate deformation analysis and FEM analysis for the turing, 279 incremental bulging of sheet metal using a spherical roller, 150 Rapid tooling Application of an expert drawbead model to the finite element Development of rapid tooling for sheet metal drawing using nickel simulation of sheet forming processes, 155 electroforming and stereolithography processes, 286 Design and application of pliable blank holder systems for the Rectangular wire helical spring optimization of process conditions in sheet metal forming, 18 > Development of a new-type suspension spring for rally cars, Sheet metal forming process 132 Investigation into wrinkling behavior in the elliptical cup deep Relative density drawing process by finite element analysis using bifurcation Experiment on metal powder compaction by differential speed theory, 170 rolling, 113 SIMA process The Al-powder forging process: its finite element analysis, Characterization of Al 7075 alloys after cold working and heating in 204 the semi-solid temperature range, 42 Reproducibility Simulation A hydraulic high-speed tryout press for the simulation of mechan- Rheological modelling on semi-solid metal alloys and simulationo f ical forming processes, 159 thixocasting processes, 53 Reshaping process A hydraulic high-speed tryout press for the simulation of mechan- Computer aided design of rolls for reshaping processes from round ical forming processes, 159 pipes to “‘channel-type” pipes, 193 Sintered preform Residual stress The Al-powder forging process: its finite element analysis, 204 A comparison of the cooling effects of compressed cold air and Slide tilting coolant for cylindrical grinding with a CBN wheel, 265 \ hydraulic high-speed tryout press for the simulation of mechan- Modeling and numerical simulation of residual stresses and bire- ical forming processes, 159 fringence in injection molded center-gated disks, 214 Speed profile Rheological data \ hydraulic high-speed tryout press for the simulation of mechan- Different concepts of thixoforging and experiments for rheological ical forming processes, 159 data, 48 Spotting Rheology \ hydraulic high-speed tryout press for the simulation of mechan- Investigation into the rapid compression of semi-solid alloy slugs, ical forming processes, 159 31 Spray forming Rheological modelling on semi-solid metal alloys and simulation of Microstructure and properties of spray formed Cr;»MoV steel for thixocasting processes, 53 rolls, 79 Riveting Sr modification Method of joining sheets by using new type rivets, 198 Electromagnetic stirring and Sr modification in A356 alloy, 69 Roll casting Stereolithography Semi-solid roll casting of aluminum alloy strip by melt drag twin Development of rapid tooling for sheet metal drawing using nickel roll caster, 64 electroforming and stereolithography processes, 286 Roll design Strain distribution Computer aided design of rolls for reshaping processes from round Characteristics of weld line movements for the deep drawing with pipes to “‘channel-type” pipes, 193 drawbeads of tailor-welded blanks, 164 Rolling load Strip casting Experiment on metal powder compaction by differential speed Semi-solid roll casting of aluminum alloy strip by melt drag twin rolling, 113 roll caster, 64 Rotary draw bending Strip tension The tube bending technology of a hydroforming process for an Hot strip width control method by using looper tension measuring automotive part, 175 system in finishing mill, 74 Rotational upset forging Strip thickness Experimental investigation of the forming parameters of the rota- Experiment on metal powder compaction by differential speed tional upset forging process, 103 rolling, 1i3 Surface accuracy Semi-solid Improvement of the accuracy in the machining of a deep shoulder Semi-solid roll casting of aluminum alloy strip by melt drag twin cut by end milling, 244 roll caster, 64 Surface roughness Electromagnetic stirring and Sr modification in A356 alloy, 69 A comparison of the cooling effects of compressed cold air and Semi-solid materials coolant for cylindrical grinding with a CBN wheel, 265 Rheological modelling on semi-solid metal alloys and simulation of Suspension spring thixocasting processes, 53 Development of a new-type suspension spring for rally cars, 132 Sensor roll Friction measurement in cold roiling, 142 Tailor-welded blanks Sheet metal Characteristics of weld line movements for the deep drawing with Method of joining sheets by using new type rivets, 198 drawbeads of tailor-welded blanks, 164 Sheet metal drawing Tension measuring system Development of rapid tooling for sheet metal drawing using nickel Hot strip width control method by using looper tension measuring electroforming and stereolithography processes, 286 system in finishing mill, 74 302 Subject Index of Volume 111 Tetragonality of martensite Twisting torque Microstructure and properties of spray formed Cr;2MoV steel for Experimental investigation of the forming parameters of the rota- rolls, 79 tional upset forging process, 103 Thermal defects A comparison of the cooling effects of compressed cold air and UBET coolant for cylindrical grinding with a CBN wheel, 265 Use of UBET for design of flash gap in closed-die forging, 107 Thixo transverse impact extrusion An UBET analysis of the non-axisymmetric extrusion/forging Different concepts of thixoforging and experiments for rheological process, 135 data, 48 Uniform microstructure Thixoforging A study on the optimal tool shape design in a hot forming process, Characterization of Al 7075 alloys after cold working and heating in 127 the semi-solid temperature range, 42 Up milling Different concepts of thixoforging and experiments for rheological Improvement of the accuracy in the machining of a deep shoulder data, 48 cut by end milling, 244 Thixoforming Investigation into the rapid compression of semi-solid alloy slugs, Vitrified bond CBN wheel 31 A comparison of the cooling effects of compressed cold air and Thixoforming of an aluminum component with a die designed by coolant for cylindrical grinding with a CBN wheel, 265 process simulation, 37 Volume of fluid (VOF) method Different concepts of thixoforging and experiments for rheological Application of an adaptive grid refinement technique to three- data, 48 dimensional finite element analysis of the filling stage in the Rheological modelling on semi-solid metal alloys and simulation of die-casting process, 59 thixocasting processes, 53 Volumetric deformation TiN/TisSi; composite The Al-powder forging process: its finite element analysis, 204 Formation of a TiN/TisSi; nano-grain composite by a non-equili- Vortex tube brium PM process, 118 A comparison of the cooling effects of compressed cold air and Titanium coolant for cylindrical grinding with a CBN wheel, 265 Aspects of forging of titanium alloys and the production of blade forms, 10 Weat Titanium nitride coated Evolution of the tribological characteristics of several forming die Evolution of the tribological characteristics of several forming die materials, 20 materials, 20 Weld line movement Tool deflection Characteristics of weld line movements for the deep drawing with Improvement of the accuracy in the machining of a deep shoulder drawbeads of tailor-welded blanks, 164 cut by end milling, 244 Weld overlay Tool design Evolution of the tribological characteristics of several forming die Extrusion of nickel-titanium alloys Nitinol to hollow shapes, materials, 20 122 Welding defects Tool life Melt front surface asperity and welding-defect generation in cera- Basic study of ball end milling on hardened steel, 240 mic injection molding, 219 Evaluation of machinability by cutting environments in high-speed Welding-defect elimination criterion milling of difficult-to-cut materials, 256 Melt front surface asperity and welding-defect generation in cera- Tool making mic injection molding, 219 The manufacturing of hard tools from metallic powders by selective Width deviation laser melting, 210 Hot strip width control method by using looper tension measuring Tool stresses system in finishing mill, 74 Extrusion of nickel-titanium alloys Nitinol to hollow shapes, Width variation 122 Application of neural networks to predict the width variation in a Tube bending plate mill, 146 The tube bending technology of a hydroforming process for an Wrinkling automotive part, 175 Investigation into wrinkling behavior in the elliptical cup deep Tube hydroforming drawing process by finite element analysis using bifurcation The tube bending technology of a hydroforming process for an theory, 170 automotive part, 175 Tungsten carbide Zirconia Evolution of the tribological characteristics of several forming dic Evolution of the tribological characteristics of several forming die materials, 20 materials, 20