Table Of Content

Journal of Materials Processing Technology Journal of Materials Processing Technology 103 (2000) 439-440 www.elsevier.com/locate/jmatprotec Author Index of Volume 103 Altintas, Y., 267 Hwang, W.-S., 206 Morao Dias, A., 389 Antunes Simoes, J.F., 398 Movahhedy, M., 267 Ipek, R., 310 Baaijens, F.P.T., 44, 51 Ishikawa, T., 374 Narendran, T.T., 318 Baptista, R., 398 Nielsen, K.B., 367 Baykara, T., 288 Jahazi, M., 276, 362 Benjamin, S.E., 383 Olovsson, L., 74 Jensen, M.R., 74, 367 Bhaskara Reddy, S.V., 318 Jingkan, Z., 189 Bolt, P.J., 87 Park, Y.-S., 206 Jonas, J.J., 374 Brekelmans, W.A.M., 44, 51 Joneja, A., 261 Paulo Davim, J., 417 Brokken, D., 44, 51 Payor, S., 230 Pertence, A.E.M., 434 Kals, H.J.J., 120, 141 Prasad, S.N., 324 Cetlin, P.R., 434 Kals, T.A., 95 Price, M.A., 57 Chan, K., 225 Kang, C.G., 237 Prodhan, A., 324 Chand, G., 149 Kang, D.C., 367 Chang, H., 200 Kang, S.S., 218 Quigley, E., 114 Chang, H.-Y., 206 Karamis, M.B., 310 Chaoguang, C., 189 Khalid, F.A., 383 Ramaekers, J.A.H., 165 Chen, F.-K., 353 Khan, R.A., 383 Rao, K.P., 135 Cheng, S.K., 135 Kim, N.S., 237 Rauch, E.F., 160 Cho, H., 347 Kirby, D.S., 247 Rauer, J., 109 Choi, J., 347 Kleiner, M., 109 Rebelo, J.C., 389 Cselényi, J., 6 Kolleck, R., 109 Reddy, S.R.S., 324 Cser, L., 6 Korhonen, A.S., 6 Reissner, J., 80 Kuzucu, V., 310 Ruan, X., 200 Danckert, J., 74, 367 Ryan, L., 36 de Graaf, R.F., 23 Lam, D.C.C., 261 Lang, L.H., 367 Sadeghi, B.H.M., 411 Ebrahimi, G., 362 Lau, K.S., 225 Sahoo, S.K., 293 Eckstein, R., 95 Lee, Y.-C., 353 Sakamoto, M., 280 Egbali, B., 276 Lipson, H., 128 Santos, M., 389 Eroglu, S., 288 Liu, C., 343 Sawada, T., 280 Liu, J., 200 Selcuk, B., 310 Gadala, M.S., 267 Liu, L., 280 Shirvani, B., 149 Geiger, M., 6 Lopes, A.B., 160 Shpitalni, M., 128 Goijaerts, A.M., 44 Lu, W., 343 Shunmugam, M.S., 318 Gongzhu, H., 189 Luijendijk, T., 29 Sillekens, W.H., 87 Govaert, L.E., 44 Lutters, D., 120 Sprenger, H., 80 Gracio, J.J., 160 Stegeman, Y.W., 44 Griffiths, J., 155 Ma, M., 194 Sterling, S$.G., 57 Griiebler, R., 80 Mac Donald, B.J., 333 Streppel, A.H., 120, 141 Mai, Y.-W., 230 Sun, J., 230 Han, Z., 343 Mak, C.K.Y., 261 Hashmi, M.S.J., 304, 333 Mantyla, M., 6 Tai, C.-C., 173 Hennige, T., 102 Margetts, D., 155 Tekkaya, A.E., 14 Hildebrand, B.G., 57 Meijer, J., 23 ten Brinke, E., 120, 141 Hogg, M., 230 Meinders, T., 65 Tsang, Y.M., 225 Hongzhi, D., 404 Mesquita, R., 389 Hsu, T.Y., 200 Min, K.B., 218 van den Berg, A., 65 Hu, J., 374 Monaghan, J., 36, 114 Vassalo, P., 389 Huétink, J., 65 Monteiro Baptista, A., 417 Vlot, A., 1 Elsevier Science S.A. PII: S0924-0136(00)00532-X 440 Author Index of Volume 103 Vogelesang, L.B., 1 Wild, P.M., 247 Yuehua, H., 189 Vollertsen, F., 424 Wong, W., 225 Yuen, M.M.F., 261 Wang, X., 194 Yeung, K.W., 225 Zhang, L.C., 230 Weidner, T., 109 Yilbas, B.S., 304 Zhang, S.H., 367 Weustink, I.F., 141 Ying, B., 194 Zhonggin, L., 404 Journal of Materials Processing Technology Journal of Materials Processing Technology 103 (2000) 441-446 www.elsevier.com/locate/jmatprotec Subject Index of Volume 103 Abductive network Bulge forming The optimization accuracy control of a die-casting product part, 173 Finite element simulation of bulge forming of a cross-joint from a Accuracy tubular blank, 333 Accuracy in process chains using hydroforming, 424 Aging CAPP Studies on solidification, aging and forgeability of modified stain- Computer aided process planning for sheet metal based on infor- less steels, 324 mation management, 120 ALE Chamber pressure Simulation of the orthogonal metal cutting process using an arbi- Analysis of the hydromechanical deep drawing of cylindrical cups, trary Lagrangian—Eulerian finite-element method, 267 367 Aluminium matrix composites Compact neighborhood algorithm Relationship between cutting force and PCD cutting tool wear in Large-scale nesting of irregular patterns using compact neighbor- machining silicon carbide reinforced aluminium, 417 hood algorithm, 135 Aluminum Computer simulation Finite element analysis of damage evolution and the prediction of Computer simulation of a non-symmetrical-section steel forming the limiting draw ratio in textured aluminum sheets, 374 process by the spline finite strip method based on the U.L. Aluminum alloy method, 343 Upper bound analysis for forging of trochoidal gears, 347 Computer-aided engineering analysis Aluminum cup A BP-neural network predictor model for plastic injection molding Analysis of the hydromechanical deep drawing of cylindrical cups, process, 411 367 Computer-assisted process planning system Anisotropy Optimal selection of parameters in multi-tool drilling, 318 Finite element analysis of damage evolution and the prediction of Conceptual design the limiting draw ratio in textured aluminum sheets, 374 3D conceptual design of sheet metal products by sketching, 128 Annealing optimization algorithm Concurrent engineering The optimization accuracy control of a die-casting product part, 173 Computer aided process planning for sheet metal based on infor- Arbitrary Lagrange—Euler method mation management, 120 Predicting the shape of blanked products: a finite element approach, Controlled rolling 51 The influence of hot rolling parameters on the microstructure and Architecture mechanical properties of an ultra-high strength steel, 276 Computer aided process planning for sheet metal based on infor- Conventional spinning mation management, 120 Metal forming: an analysis of spinning processes, 114 Artificial intelligence Copper-beryllium alloy A BP-neural network predictor model for plastic injection molding An experimental study on electro-discharge machining and polish- process, 411 ing of high strength copper—beryllium alloys, 389 Artificial neural network Corrosion A BP-neural network predictor model for plastic injection molding Development of fibre metal laminates for advanced aerospace process, 411 structures, | Aus-Bay quenching Cost control The influence of flow-forming parameters and microstructure on A generic framework for cost estimation and cost control in product the quality of a D6ac steel, 362 design, 141 Auto-body panel Cost estimation Investigation of sheet metal forming by numerical simulation and A generic framework for cost estimation and cost control in product experiment, 404 design, 141 Creep deformation behavior Bending Deformation prediction of the laminated object modeling compo- Development of irradiation strategies for 3D-laser forming, 102 site laminates, 261 Blast furnace slag Crevice corrosion Performance of steel in ordinary Portland, fly ash and slag cement Initiation modeling of crevice corrosion in 316L stainless steels, mortars during the hydration period, 383 206 Boriding and carburizing methods Crevice geometry An investigation on surface properties of treated low carbon and Initiation modeling of crevice corrosion in 316L stainless steels, alloyed steels (boriding and carburizing), 310 206 Elsevier Science S.A. PII: S0924-0136(00)00533-1 442 Subject Index of Volume 103 Customer focused logistics Experiment Variation in production schedules — implications for both the Deep drawing simulations of Tailored Blanks and experimental company and its suppliers, 155 verification, 65 Cutting forces Experimental validation Relationship between cutting force and PCD cutting tool wear in Laser cutting of metal laminates: analysis and experimental valida- machining silicon carbide reinforced aluminium, 417 tion, 23 Cutting stock problem Experiments Large-scale nesting of irregular patterns using compact neighbor- Numerical model for the oil pressure distribution in the hydro- hood algorithm, 135 mechanical deep drawing process, 74 Cylindrical cup Expert system Analysis of the hydromechanical deep drawing of cylindrical cups, 3D conceptual design of sheet metal products by sketching, 128 367 Explicit finite element Analysis of the hydromechanical deep drawing of cylindrical cups, Dé6ac steel 367 The influence of flow-forming parameters and microstructure on Extrusion the quality of a D6ac steel, 362 Comparison of SERR analysis in extrusion with experiment, 293 Damage Finite element analysis of damage evolution and the prediction of Fatigue the limiting draw ratio in textured aluminum sheets, 374 Development of fibre metal laminates for advanced aerospace Deep drawing structures, 1 Deep drawing simulations of Tailored Blanks and experimental Fe2B phase verification, 65 An investigation on surface properties of treated low carbon and Deep drawing of pressure vessel end closures: finite element alloyed steels (boriding and carburizing), 310 simulation and validation, 247 FE-simulation Deformation constitutive equation Die-less forming of sheet metal parts, 109 Deformation prediction of the laminated object modeling compo- Fibre metal laminates site laminates, 261 Development of fibre metal laminates for advanced aerospace Deformation field structures, | Can a new experimental and numerical study improve metal Filling process blanking? 44 An investigation of flow characteristics considering the effect of Diamond wheel viscosity variation in the thixoforming process, 237 Soft-elastic dressing of fine grain diamond wheels, 194 Finite element Die-casting die Investigation of sheet metal forming by numerical simulation and The optimization accuracy control of a die-casting product part, 173 experiment, 404 Digital image correlation Finite element analysis Can a new experimental and numerical study improve metal Failure mechanism of riveted joint in fibre metal laminates, 36 blanking? 44 Finite element method Dimension prediction Can a new experimental and numerical study improve metal Deformation prediction of the laminated object modeling compo- blanking? 44 site laminates, 261 Predicting the shape of blanked products: a finite element approach, Dimensional analysis 51 Material removal in the optical polishing of hydrophilic polymer An evaluation of three material models used in the finite element materials, 230 simulation of a sheet stretching process, 57 Dimensional chain Numerical model for the oil pressure distribution in the hydro- The Monte-Carlo method for solving the dimensional chain positive mechanical deep drawing process, 74 problem, 189 Development of irradiation strategies for 3D-laser forming, 102 Discrete fracture approach Finite element simulation of bulge forming of a cross-joint from a Predicting the shape of blanked products: a finite element approach, tubular blank, 333 51 Yield criterion for a perforated sheet with a uniform triangular Discretization pattern of round holes and a low ligament ratio, 353 Comparison of SERR analysis in extrusion with experiment, 293 Finite element simulation Dislocation substructures Deep drawing of pressure vessel end closures: finite element Analysis of plastic instability in commercially pure Al alloys, 160 simulation and validation, 247 Dissimilar aluminium alloys Finite element analysis of damage evolution and the prediction of Welding of dissimilar aluminium alloys, 29 the limiting draw ratio in textured aluminum sheets, 374 Dressing Finite-element method Soft-elastic dressing of fine grain diamond wheels, 194 Simulation of the orthogonal metal cutting process using an arbi- Ductility trary Lagrangian—Eulerian finite-element method, 267 A criterion for local necking, 165 Flame resistance Similarity of ductility between model and real materials, 434 Development of fibre metal laminates for advanced aerospace structures, | Electro-discharge machining Flash weldability An experimental study on electro-discharge machining and polish- A study on resistance welding in steel sheets for tailor welded ing of high strength copper—beryllium alloys, 389 blank. Evaluation of flash weldability and formability (2nd Equivalent continuum Report), 218 Yield criterion for a perforated sheet with a uniform triangular Flat pattern pattern of round holes and a low ligament ratio, 353 3D conceptual design of sheet metal products by sketching, 128 Subject Index of Volume 103 Flatness Hydroforming Prediction of shape aberrations due to punching, shearing and Accuracy in process chains using hydroforming, 424 slitting, 87 Hydromechanical deep drawing Flexibility Numerical model for the oil pressure distribution in the hydro- Variation in production schedules — implications for both the mechanical deep drawing process, 74 company and its suppliers, 155 Analysis of the hydromechanical deep drawing of cylindrical cups, Flow stress 367 Prediction of the flow stress of high-speed steel during hot deformation using a BP artificial neural network, 200 Image sensing Flow turning Evaluation of the surface deflections in pressed automobile panels The influence of flow-forming parameters and microstructure on by an optical reflection method, 280 the quality of a D6ac steel, 362 Impact Fly ash Development of fibre metal laminates for advanced aerospace Performance of steel in ordinary Portland, fly ash and slag cement structures, 1 mortars during the hydration period, 383 FML Joining system Failure mechanism of riveted joint in fibre metal laminates, 36 Die-less forming of sheet metal parts, 109 Forging Studies on solidification, aging and forgeability of modified stain- Kinematically admissible velocity field less steels, 324 Comparison of SERR analysis in extrusion with experiment, 293 Forging of trochoidal gears Upper bound analysis for forging of trochoidal gears, 347 Formability Laminates A study on resistance welding in steel sheets for tailor welded Laser cutting of metal laminates: analysis and experimental valida- blank. Evaluation of flash weldability and formability (2nd tion, 23 Laser cutting Report), 218 Similarity of ductility between model and real materials, 434 Laser cutting of metal laminates: analysis and experimental valida- Forming tion, 23 State-of-the-art of simulation of sheet metal forming, 14 Laser forming Forming operations Development of irradiation strategies for 3D-laser forming, 102 Analysis of plastic instability in commercially pure Al alloys, 160 Laser melted Forming simulation Laser treatment of Ti-6AI-4V alloy prior to plasma nitriding, 304 Investigation of sheet metal forming by numerical simulation and Life prediction model experiment, 404 Initiation modeling of crevice corrosion in 316L stainless steels, Fractals 206 Tribological system modelling and simulation in metal forming Limiting draw ratio processes, 80 Finite element analysis of damage evolution and the prediction of Free corrosion potential the limiting draw ratio in textured aluminum sheets, 374 Performance of steel in ordinary Portland, fly ash and slag cement Liquid-phase sintering mortars during the hydration period, 383 Effects of powder mixing technique and tungsten powder size on Friction the properties of tungsten heavy alloys, 288 Tribological system modelling and simulation in metal forming Local necking processes, 80 A criterion for local necking, 165 Logistics Generic framework Logistics from IMS towards virtual factory, 6 A generic framework for cost estimation and cost control in product LOM composite laminate design, 141 Deformation prediction of the laminated object modeling compo- Genetic algorithm site laminates, 261 Large-scale nesting of irregular patterns using compact neighbor- Low temperature plasma Surface structuring of poly(ethylene terephthalate) fibres with a UV hood algorithm, 135 excimer laser and low temperature plasma, 225 Geometric model Investigation of sheet metal forming by numerical simulation and experiment, 404 Mass customisation Grain size control Variation in production schedules — implications for both the The influence of hot rolling parameters on the microstructure and company and its suppliers, 155 mechanical properties of an ultra-high strength steel, 276 Material model GTA welding An evaluation of three material models used in the finite element Welding of dissimilar aluminium alloys, 29 simulation of a sheet stretching process, 57 Material removal Hot cracking Material removal in the optical polishing of hydrophilic polymer Welding of dissimilar aluminium alloys, 29 materials, 230 Hot rolling Mechanical properties The influence of hot rolling parameters on the microstructure and Welding of dissimilar aluminium alloys, 29 mechanical properties of an ultra-high strength steel, 276 Metal forming Hybrid material Accuracy in process chains using hydroforming, 424 Laser cutting of metal laminates: analysis and experimental valida- Metal spinning tion, 23 Metal forming: an analysis of spinning processes, 114 444 Subject Index of Volume 103 The influence of flow-forming parameters and microstructure on Polarisation resistance the quality of a D6ac steel, 362 Performance of steel in ordinary Portland, fly ash and slag cement Microstructure mortars during the hydration period, 383 A study on resistance welding in steel sheets for tailor welded Polishing blank. Evaluation of flash weldability and formability (2nd Material removal in the optical polishing of hydrophilic polymer Report), 218 materials, 230 Miniaturization Poly(ethylene terephthalate) fibres Miniaturization in sheet metal working, 95 Surface structuring of poly(ethylene terephthalate) fibres with a UV Model material excimer laser and low temperature plasma, 225 Similarity of ductility between model and real materials, 434 Polycrystalline diamond Modeling Relationship between cutting force and PCD cutting tool wear in Laser cutting of metal laminates: analysis and experimental valida- machining silicon carbide reinforced aluminium, 417 tion, 23 Polymer Material removal in the optical polishing of hydrophilic polymer Material removal in the optical polishing of hydrophilic polymer materials, 230 materials, 230 Monte-carlo simulation Powder mixing The Monte-Carlo method for solving the dimensional chain positive Effects of powder mixing technique and tungsten powder size on problem, 189 the properties of tungsten heavy alloys, 288 Multi-tool drilling Powder size Optimal selection of parameters in multi-tool drilling, 318 Effects of powder mixing technique and tungsten powder size on the properties of tungsten heavy alloys, 288 Nesting Pre-bulging Large-scale nesting of irregular patterns using compact neighbor- Analysis of the hydromechanical deep drawing of cylindrical cups, hood algorithm, 135 367 Newtonian rheology model Prediction of flow stress An investigation of flow characteristics considering the effect of Prediction of the flow stress of high-speed steel during hot defor- viscosity variation in the thixoforming process, 237 mation using a BP artificial neural network, 200 Non-symmetrical-section steel Press Computer simulation of a non-symmetrical-section steel forming A study on resistance welding in steel sheets for tailor welded process by the spline finite strip method based on the U.L. blank. Evaluation of flash weldability and formability (2nd method, 343 Report), 218 Numerical simulation Press forming State-of-the-art of simulation of sheet metal forming, 14 Evaluation of the surface deflections in pressed automobile panels by an optical reflection method, 280 Optical measurement Product design Evaluation of the surface deflections in pressed automobile panels A generic framework for cost estimation and cost control in product by an optical reflection method, 280 design, 141 Optimal selection Production Optimal selection of parameters in multi-tool drilling, 318 Variation in production schedules — implications for both the Ordinary Portland cement company and its suppliers, 155 Performance of steel in ordinary Portland, fly ash and slag cement Pseudo-random number mortars during the hydration period, 383 The Monte-Carlo method for solving the dimensional chain positive Orientation constraints problem, 189 Large-scale nesting of irregular patterns using compact neighbor- Punching hood algorithm, 135 Prediction of shape aberrations due to punching, shearing and Orthogonal metal cutting process slitting, 87 Simulation of the orthogonal metal cutting process using an arbitrary Lagrangian—Eulerian finite-element method, 267 Re-heating process Ostwald—deWaele rheology model An investigation of flow characteristics considering the effect of An investigation of flow characteristics considering the effect of viscosity variation in the thixoforming process, 237 viscosity variation in the thixoforming process, 237 Relaxation circuit Overall equipment effectiveness and just-in-time An experimental study on electro-discharge machining and polish- Implementation of TPM in cellular manufacture, 149 ing of high strength copper—beryllium alloys, 389 Remeshing Perforated sheet Predicting the shape of blanked products: a finite element approach, Yield criterion for a perforated sheet with a uniform triangular 51 pattern of round holes and a low ligament ratio, 353 Reynold’s equation Planar blanking Numerical model for the oil pressure distribution in the hydro- Can a new experimental and numerical study improve metal mechanical deep drawing process, 74 blanking? 44 Ring compression test Planned preventive maintenance Studies on solidification, aging and forgeability of modified stain- Implementation of TPM in cellular manufacture, 149 less steels, 324 Plasma nitriding Riveting Laser treatment of Ti-6AI-4V alloy prior to plasma nitriding, 304 Failure mechanism of riveted joint in fibre metal laminates, 36 Plastic injection molding A BP-neural network predictor model for plastic injection molding SERR technique process, 411 Comparison of SERR analysis in extrusion with experiment, 293 Subject Index of Volume 103 Shear forming Surface finish and machining time Metal forming: an analysis of spinning processes, 114 Three and five axes milling of sculptured surfaces, 398 Shearing Prediction of shape aberrations due to punching, shearing and 2024-T3 Aluminium alloy slitting, 87 Failure mechanism of riveted joint in fibre metal laminates, 36 Sheet forming T1 high-speed steel Finite element analysis of damage evolution and the prediction of Prediction of the flow stress of high-speed steel during hot defor- the limiting draw ratio in textured aluminum sheets, 374 mation using a BP artificial neural network, 200 Sheet metal Tailored Blank State-of-the-art of simulation of sheet metal forming, 14 Deep drawing simulations of Tailored Blanks and experimental Can a new experimental and numerical study improve metal verification, 65 blanking? 44 Texture Prediction of shape aberrations due to punching, shearing and Analysis of plastic instability in commercially pure Al alloys, slitting, 87 160 3D conceptual design of sheet metal products by sketching, 128 Finite element analysis of damage evolution and the prediction of Evaluation of the surface deflections in pressed automobile panels the limiting draw ratio in textured aluminum sheets, 374 by an optical reflection method, 280 Thermomechanical processing Sheet metal blanking The influence of hot rolling parameters on the microstructure and Predicting the shape of blanked products: a finite element approach, mechanical properties of an ultra-high strength steel, 276 51 Thick plate Sheet metal forming Deep drawing of pressure vessel end closures: finite element Logistics from IMS towards virtual factory, 6 simulation and validation, 247 Die-less forming of sheet metal parts, 109 Thixoforming Sheet metal working An investigation of flow characteristics considering the effect of Miniaturization in sheet metal working, 95 viscosity variation in the thixoforming process, 237 Simulation Three and five axes milling Deep drawing simulations of Tailored Blanks and experimental Three and five axes milling of sculptured surfaces, 398 verification, 65 Ti-6Al-4V alloy Finite element simulation of bulge forming of a cross-joint from a Laser treatment of Ti-6AI-4V alloy prior to plasma nitriding, 304 tubular blank, 333 Time-temperature dependence Similarity of ductility between model and real materials, 434 Deformation prediction of the laminated object modeling compo- Single-layer structure site laminates, 261 Deformation prediction of the laminated object modeling compo- Tool type and orientation site laminates, 261 Three and five axes milling of sculptured surfaces, 398 Size effects Tools wear Miniaturization in sheet metal working, 95 Relationship between cutting force and PCD cutting tool wear in Sketch machining silicon carbide reinforced aluminium, 417 3D conceptual design of sheet metal products by sketching, 128 Total productive maintenance Slitting Implementation of TPM in cellular manufacture, 149 Prediction of shape aberrations due to punching, shearing and Tribology slitting, 87 Tribological system modelling and simulation in metal forming Solidification processes, 80 Studies on solidification, aging and forgeability of modified stain- Tribosystems less steels, 324 Tribological system modelling and simulation in metal forming Spin forging processes, 80 Metal forming: an analysis of spinning processes, 114 Tube forming Spline finite strip method Accuracy in process chains using hydroforming, 424 Computer simulation of anon-symmetrical-section steel forming pro- Tube spinning cess by the spline finite strip method based on the U.L. method, 343 The influence of flow-forming parameters and microstructure on Stainless steel the quality of a D6ac steel, 362 Initiation modeling of crevice corrosion in 316L stainless steels, Tubes 206 Die-less forming of sheet metal parts, 109 Studies on solidification, aging and forgeability of modified stain- Tungsten heavy alloys less steels, 324 Effects of powder mixing technique and tungsten powder size on Steel cup the properties of tungsten heavy alloys, 288 Analysis of the hydromechanical deep drawing of cylindrical cups, TWB 367 A study on resistance welding in steel sheets for tailor welded Strain localisation blank. Evaluation of flash weldability and formability (2nd An evaluation of three material models used in the finite element Report), 218 simulation of a sheet stretching process, 57 Strain path U.L. method A criterion for local necking, 165 Computer simulation of a non-symmetrical-section steel forming Strain rate sensitivity process by the spline finite strip method based on the U.L. A criterion for local necking, 165 method, 343 Surface deflection UHSS Evaluation of the surface deflections in pressed automobile panels The influence of hot rolling parameters on the microstructure and by an optical reflection method, 280 mechanical properties of an ultra-high strength steel, 276 446 Subject Index of Volume 103 Ultra-precision grinding Virtual factory Soft-elastic dressing of fine grain diamond wheels, 194 Logistics from IMS towards virtual factory, 6 Upper bound analysis Viscosity Upper bound analysis for forging of trochoidal gears, 347 An investigation of flow characteristics considering the effect of Upper-bound viscosity variation in the thixoforming process, 237 Comparison of SERR analysis in extrusion with experiment, Void nucleation and growth 293 Finite element analysis of damage evolution and the prediction of UV excimer laser the limiting draw ratio in textured aluminum sheets, 374 Surface structuring of poly(ethylene terephthalate) fibres with a UV excimer laser and low temperature plasma, 225 Working media Die-less forming of sheet metal parts, 109 V-bending test World class manufacture A study on resistance welding in steel sheets for tailor welded Implementation of TPM in cellular manufacture, 149 blank. Evaluation of flash weldability and formability (2nd Report), 218 X-ray diffraction method Velocity discontinuity An investigation on surface properties of treated low carbon and Comparison of SERR analysis in extrusion with experiment, 293 alloyed steels (boriding and carburizing), 310