Table Of Content

Journal of Materials Processing 4 A; YA Technology ELSEetVeI!E R Journal of Materials Processing Technology 108 (2001) 408-409 www.elsevier.com/locate/jmatprotec Author Index of Volume 108 Agrawal, D., 26 Heo. Y., 1 Moraitakis, E., 156 Aifantis, E., 185 Hidasi, B., 205 Moreira, L.P., 78 Altan, T., 384 Higasa, H., 141 Mount, A.R., 338 yL Argyropoulou, R., 179 Horvath, M., 269 Atreya, S.K., 328 Huang, C.-A., 294 Nagaya, K., 161 Nian, C.Y., 278 Bauer, H., 97 Ikeda, K., 237 Niarchos, D., 156, 193 Inamdar, M.V., 45 Nishimura, K., 237 8 Campbell, M., 197 Numata, R., 141 Chang, B., 307 Jackson, M.J., 114 Chang, S.-C., 294 Jain, R.K., 62 Ochsenkiihn, K.M., 179 Chang, Y., 294 Jain, V.K., 62 Ochsenkiihn-Petropoulou, M., 179 Chen, C.-K., 8 Jardine, D.J., 338 Ohsaki, H., 148 Chen, T.-L., 294 Jayan, P.S., 26 Ohzeki, K., 161 Cheng, J., 26 Okazaki, Y., 221 Cheng, P.J., 314 Kallias, G., 156 Choi, S., 87 Kansal, G., 328 Palli, I., 197 Choi, Y., 1 Kao, W.H., 30 Panagiotopoulos, I., 193 Christides, C., 193 Katz, R.N., 68 Paparigas, D., 209 Clifton, D., 338 Khor, K.A., 398 Parissakis, G., 179 Kiartzis, S., 232 Paulmier, D., 269 Date, P.P., 45 Kim, H.Y., 1 Pech-Canul, M.I., 68 0 Davtian, S.P., 201 Kim, Y.H., 87 Pissas, M., 145, 156, 193 Demachi, K., 141, 152 Kinzel, G.L., 369 Prasad, Y.V.R.K., 320 Desai, U.B., 45 Kladas, A., 217, 232 Prohaszka, J., 205 Dobranszky, J., 205 Koc, M., 384 Proussalidis, J., 217 Dogas, D., 197 Kojima, F., 263 1 Konstantinidis, D., 185 Raitsios, P., 246 Echigoya, J., 213 Kubota, N., 263 Rao, P.N., 328 Edwards, G.R., 376 Kyriakakis, J., 257 Rimkus, W., 97 Efthimiopoulos, T., 197 Roth, R., 338 Elefsiniotis, S., 209 Roy, R., 26 Eleftheriadis, I., 185 Ruan, X., 300 Enokizono, M., 225 Seo, D., 1 Feng, J.P., 40 Seshacharyulu, T., 320 Ferran, G., 78 Shi, X., 300 Ferron, G., 78 Shi, Y., 307 Frazier, W.G., 320 Shimizu, R., 141 Shindo, S., 152 Gao, W., 349 Song, G.S., 394 Gau, J.-T., 369 Lu, L., 307 Srinivasan, R., 356 Georgilakis, P., 209 Luo, Z.J., 40 Stamopoulos, D., 145 Grabchenko, A.I., 269 Su, Y.L., 30 Graham, I.D., 55 Makhlouf, M.M., 68 Sun, J.J., 356 Gravalidis, Ch., 197 Mamalis, A.G., 125, 126, 165, 201, 269 Guo, Z.Q., 394 Manolakos, D.E., 165 Takahashi, N., 241 Martirosian, S.A., 201 Takahashi, S., 213 Hallstrém, J., 21 Marya, M., 376 Takase, K., 152 Hashimoto, S., 263 Medeiros, S.C., 320 Tanaka, M., 237, 253 Hashmi, K., 55 Mészaros, I., 269 Tarantilis, P., 179 Hatafuku, H., 213 Mihsein, M.J.A., 97 Tarng, Y.S., 278 Hatziargyriou, N., 209, 217 Mills, B., 55, 114 Taylor, E.J., 356 Hayashi, N., 161 Miya, K., 141, 152 Tonoyan, A.O., 201 Elsevier Science B.V. PII: S0924-0136(00)00870-0 Journal of Materials Processing 4 A; YA Technology ELSEetVeI!E R Journal of Materials Processing Technology 108 (2001) 408-409 www.elsevier.com/locate/jmatprotec Author Index of Volume 108 Agrawal, D., 26 Heo. Y., 1 Moraitakis, E., 156 Aifantis, E., 185 Hidasi, B., 205 Moreira, L.P., 78 Altan, T., 384 Higasa, H., 141 Mount, A.R., 338 yL Argyropoulou, R., 179 Horvath, M., 269 Atreya, S.K., 328 Huang, C.-A., 294 Nagaya, K., 161 Nian, C.Y., 278 Bauer, H., 97 Ikeda, K., 237 Niarchos, D., 156, 193 Inamdar, M.V., 45 Nishimura, K., 237 8 Campbell, M., 197 Numata, R., 141 Chang, B., 307 Jackson, M.J., 114 Chang, S.-C., 294 Jain, R.K., 62 Ochsenkiihn, K.M., 179 Chang, Y., 294 Jain, V.K., 62 Ochsenkiihn-Petropoulou, M., 179 Chen, C.-K., 8 Jardine, D.J., 338 Ohsaki, H., 148 Chen, T.-L., 294 Jayan, P.S., 26 Ohzeki, K., 161 Cheng, J., 26 Okazaki, Y., 221 Cheng, P.J., 314 Kallias, G., 156 Choi, S., 87 Kansal, G., 328 Palli, I., 197 Choi, Y., 1 Kao, W.H., 30 Panagiotopoulos, I., 193 Christides, C., 193 Katz, R.N., 68 Paparigas, D., 209 Clifton, D., 338 Khor, K.A., 398 Parissakis, G., 179 Kiartzis, S., 232 Paulmier, D., 269 Date, P.P., 45 Kim, H.Y., 1 Pech-Canul, M.I., 68 0 Davtian, S.P., 201 Kim, Y.H., 87 Pissas, M., 145, 156, 193 Demachi, K., 141, 152 Kinzel, G.L., 369 Prasad, Y.V.R.K., 320 Desai, U.B., 45 Kladas, A., 217, 232 Prohaszka, J., 205 Dobranszky, J., 205 Koc, M., 384 Proussalidis, J., 217 Dogas, D., 197 Kojima, F., 263 1 Konstantinidis, D., 185 Raitsios, P., 246 Echigoya, J., 213 Kubota, N., 263 Rao, P.N., 328 Edwards, G.R., 376 Kyriakakis, J., 257 Rimkus, W., 97 Efthimiopoulos, T., 197 Roth, R., 338 Elefsiniotis, S., 209 Roy, R., 26 Eleftheriadis, I., 185 Ruan, X., 300 Enokizono, M., 225 Seo, D., 1 Feng, J.P., 40 Seshacharyulu, T., 320 Ferran, G., 78 Shi, X., 300 Ferron, G., 78 Shi, Y., 307 Frazier, W.G., 320 Shimizu, R., 141 Shindo, S., 152 Gao, W., 349 Song, G.S., 394 Gau, J.-T., 369 Lu, L., 307 Srinivasan, R., 356 Georgilakis, P., 209 Luo, Z.J., 40 Stamopoulos, D., 145 Grabchenko, A.I., 269 Su, Y.L., 30 Graham, I.D., 55 Makhlouf, M.M., 68 Sun, J.J., 356 Gravalidis, Ch., 197 Mamalis, A.G., 125, 126, 165, 201, 269 Guo, Z.Q., 394 Manolakos, D.E., 165 Takahashi, N., 241 Martirosian, S.A., 201 Takahashi, S., 213 Hallstrém, J., 21 Marya, M., 376 Takase, K., 152 Hashimoto, S., 263 Medeiros, S.C., 320 Tanaka, M., 237, 253 Hashmi, K., 55 Mészaros, I., 269 Tarantilis, P., 179 Hatafuku, H., 213 Mihsein, M.J.A., 97 Tarng, Y.S., 278 Hatziargyriou, N., 209, 217 Mills, B., 55, 114 Taylor, E.J., 356 Hayashi, N., 161 Miya, K., 141, 152 Tonoyan, A.O., 201 Elsevier Science B.V. PII: S0924-0136(00)00870-0 Author Index of Volume 108 Tor, S.B., 398 Vottea, I.N., 165 Xu, C.-H., 349 Tsuboi, H., 237 Xu, D.S., 394 Tsuboi, Y., 148 Tsuchimoto, M., 188 Wang, C.-C., 294 Yamamoto, K., 22 Wang, T., 394 Yanase, S., 221 Ueda, T., 213 Wei, Y., 300 Yang, G.C., 394 Um, K.W., 106 Wu, C.L., 286 Yang, Y.-L., 349 Wu, C.T., 30 Vottea, I., 179 Wu, S.-C., 8 Zhou, Y.H., 394 Journal of Materials Processing Technology Journal of Materials Processing Technology 108 (2001) 410-415 www-.elsevier.com/locate/jmatprotec Subject Index of Volume 108 Abrasive flow machining Burr Optimum selection of machining conditions in abrasive flow Experimental study of burr formation and tool chipping in the face machining using neural network, 62 milling of stainless steel, 12 Alumina abrasive grit Ceramic Continuous microwave sintering of alumina abrasive grits, 26 On the modelling of the compaction mechanism of shock com- 2024 Aluminum alloy pacted powders, 165 Fabrication of 2024 aluminum spun tube using a thermomechanical High-temperature superconducting polymer—ceramic composi- treatment process, 294 tions, 201 Aluminum alloys Optimum conditions for pressureless infiltration of SiC, preforms by aluminum alloys, 68 Coating Analytical model Optimum Ti-C:H coatings on tungsten carbide inserts for milling Mathematical model and experimental validation of surface profile applications, 30 of a workpiece in round—oval—round pass sequence, 87 Compaction Anisotropy On the modelling of the compaction mechanism of shock com- The effect of magnetic field on the recrystallisation of ferromag- pacted powders, 165 netic material with special respect regarding its anisotropy, Computational model 205 Studies on the stress distribution and fatigue behavior of weld- Artificial neural network bonded lap shear joints, 307 Studies on the prediction of springback in air vee bending of Conductivity metallic sheets using an artificial neural network, 45 Leakage field of a transformer under conventional and supercon- A prediction of welding process parameters by prediction of back- ducting condition, 246 bead geometry, 106 Control Control of resonance for a rotating shaft levitated by the high Back-bead geometry temperature super conductor by using a rotating magnetic A prediction of welding process parameters by prediction of back- damper, 161 bead geometry, 106 Core construction Back-bead prediction system ALSTOM Hellas experience on power and distribution transfor- A prediction of welding process parameters by prediction of back- mers, 257 bead geometry, 106 Counterblow hammer forging Bauschinger effect Influence of friction on die filling in counterblow hammer forging, An experimental investigation of the influence of the Bauschinger 21 effect on springback predictions, 369 Critical speed Bending Control of resonance for a rotating shaft levitated by the high A study on the laser forming of near-alpha and metastable beta temperature super conductor by using a rotating magnetic titanium alloy sheets, 376 damper, 161 Bending angle Cross sectional area An analytical model to estimate angle formed by laser, 314 Mathematical model and experimental validation of surface Bending effects profile of a workpiece in round—oval-round pass sequence, Simulation of sheet metal forming by a one-step approach: choice 87 of element, 300 Cubic boron nitride (CBN) grinding wheels Boronizing Materials selection applied to vitrified alumina & CBN grinding Superplastic boronizing of a low alloy steel — microstructural wheels, 114 aspects, 349 Cup drawing BSCCO Experimental and numerical analysis of the cup drawing test for Large area YBaCuO and BSCCO coatings produced on orthotropic metal sheets, 78 different substrates by an electrophoretic deposition technique, Cutting tool 179 Ultraprecision metal removal processing of mirror-surfaces, 269 Buckling Cyclical loading A study on the laser forming of near-alpha and metastable beta An experimental investigation of the influence of the Bauschinger titanium alloy sheets, 376 effect on springback predictions, 369 Bulk high-7. superconductor 3D analysis Shielding current model and frozen field model in analysis of 3D analysis of magnetization distribution magnetized by capacitor- magnetic force between a bulk HTS and a magnet, 188 discharge impulse magnetizer, 241 Elsevier Science B.V. PII: S0924-0136(00)00871-2 Subject Index of Volume 108 DC magnetization Excimer laser Single crystal growth and vortex matter phase diagram in Screening effects of the excimer laser produced plasma of HgBa,CuO,,, superconductor, 145 YBa>Cu;0,, 197 Deep drawing Investigations of weld-line movements for the deep drawing pro- Fabrication cess of tailor welded blanks, | Study: temperature and residual stress in an injection moulded gear, Deterministic technique 328 Deterministic and artificial intelligence approaches in optimizing Face milling permanent magnet generators for wind power applications, 232 Experimental study of burr formation and tool chipping in the face Die filling milling of stainless steel, 12 Influence of friction on die filling in counterblow hammer forging, Fatigue behavior 21 Studies on the stress distribution and fatigue behavior of weld- Directional solidification bonded lap shear joints, 307 Directional growth of metastable phase y in laser-remelted Ti—Al, Ferromagnetic material 394 The effect of magnetic field on the recrystallisation of ferromag- Dislocation structure netic material with special respect regarding its anisotropy, 205 Martensitic transformation due to plastic deformation and magnetic Finite element method properties in SUS 304 stainless steel, 213 A method for the optimal control of forging process variables using Dissipative structure theory the finite element method and control theory, 40 A method for the optimal control of forging process variables using Computation results of the TEAM workshop Problem 7 by finite the finite element method and control theory, 40 element methods using tetrahedral and hexahedral elements, Dissolution stability 237 Electrochemical machining of gamma titanium aluminide inter- 3D analysis of magnetization distribution magnetized by capacitor- metallics, 338 discharge impulse magnetizer, 241 DKT shell element Flow-stress Simulation of sheet metal forming by a one-step approach: choice Design of load-curves for hydroforming applications, 97 of element, 300 Flux pinning Double diffusivity Analysis of magnetic relaxation in a thin disk of YBa:Cu;07_5 Application of double diffusivity model to superconductors, 185 superconductor, 156 Dynamic vibration absorber Forging process variables Design of a dynamic vibration absorber against vibrations in A method for the optimal control of forging process variables using turning operations, 278 the finite element method and control theory, 40 Formability Earing formation An overall review of the tube hydroforming (THF) technology, 384 Experimental and numerical analysis of the cup drawing test for Foster II equivalent circuit orthotropic metal sheets, 78 Iron lamination efficient representation in power transformers, 217 Eddy current Friction Identification of crack profiles using genetic programming and Influence of friction on die filling in counterblow hammer forging, fuzzy inference, 263 21 Eddy current effect An overall review of the tube hydroforming (THF) technology, 384 lron lamination efficient representation in power transformers, 217 Frozen field model Electric motors Shielding current model and frozen field model in analysis of Study on electric motors with bulk superconductors in the rotor, 148 magnetic force between a bulk HTS and a magnet, 188 Electrical machines Fuzzy inference Two-dimensional (vector) magnetic property and improved mag- Identification of crack profiles using genetic programming and netic field analysis for electrical machines, 225 fuzzy inference, 263 Electricity Fuzzy logic Near net-shape manufacturing of bulk ceramic high-7.. superconductors for application in electricity and transportation, 126 Electrochemical machining Genetic algorithm Electrochemical machining of gamma titanium aluminide inter- Optimum selection of machining conditions in abrasive flow metallics, 338 machining using neural network, 62 MREF-ECM process for hard passive materials surface finishing, Genetic programming 356 Identification of crack profiles using genetic programming and Electrochemical polishing fuzzy inference, 263 MREF-ECM process for hard passive materials surface finishing, Grain boundary 356 Application of double diffusivity model to superconductors, 185 Electrophoretic deposition Growth texture Large area YBaCuO and BSCCO coatings produced on different Superplastic boronizing of a low alloy steel — microstructural substrates by an electrophoretic deposition technique, 179 aspects, 349 Equiaxed preform Influence of oxygen content on the forging response of equiaxed Haptic sensor (a+) preform of Ti-6AI-4V: commercial vs. ELI grade, Development of tactile sensor for monitoring skin conditions, 253 320 Hexahedral edge element Exchange biasing Computation results of the TEAM workshop Problem 7 by finite Pulsed laser deposition of mixed valence manganite artificial element methods using tetrahedral and hexahedral elements, superstructures, 193 237 412 Subject Index of Volume 108 HgBa,CuO,,, compound Machining parameters Single crystal growth and vortex matter phase diagram in Fuzzy logic based data selection for the drilling process, 55 HgBa,CuO,.,., superconductor, 145 Magnet High temperature A study on the relaxation of levitation property in an HTSC Control of resonance for a rotating shaft levitated by the high magnetic bearing, 152 temperature super conductor by using a rotating magnetic Shielding current model and frozen field model in analysis of damper, 161 magnetic force between a bulk HTS and a magnet, 188 High-7, superconductors Magnetic field Near net-shape manufacturing of bulk ceramic high-T, supercon- The effect of magnetic field on the recrystallisation of ferromag- ductors for application in electricity and transportation, 126 netic material with special respect regarding its anisotropy, 205 Hot working Magnetic force Influence of oxygen content on the forging response of equiaxed Shielding current model and frozen field model in analysis of (a+) preform of Ti-6Al4V: commercial vs. ELI grade, magnetic force between a bulk HTS and a magnet, 188 320 Magnetic properties HTSC Martensitic transformation due to plastic deformation and magnetic A study on the relaxation of levitation property in an HTSC properties in SUS 304 stainless steel, 213 magnetic bearing, 152 Magnetic relaxation Human skin conditions Analysis of magnetic relaxation in a thin disk of YBa2Cu3;07_5 Development of tactile sensor for monitoring skin conditions, 253 superconductor, 156 Hydroforming Magnetic steel An overall review of the tube hydroforming (THF) technology, ALSTOM Hellas experience on power and distribution transfor- 384 mers, 257 Magnetizer IHP process 3D analysis of magnetization distribution magnetized by capacitor- Design of load-curves for hydroforming applications, 97 discharge impulse magnetizer, 241 IN718 alloy Martensitic transformation A method for the optimal control of forging process variables using Martensitic transformation due to plastic deformation and magnetic the finite element method and control theory, 40 properties in SUS 304 stainless steel, 213 Iron Mathematical model Effective use of magnetic materials in transformer manufacturing, A mathematical model for the evaluation of conically tapered parts, 209 8 Maximum inscribed cone 316L stainless steel powder A mathematical model for the evaluation of conically tapered parts, Production of metal matrix composite part by powder injection 8 molding, 398 Metal matrix composites Laser energy flux Production of metal matrix composite part by powder injection Screening effects of the excimer laser produced plasma of molding, 398 YBa>Cu;0,, 197 Metal removal processing Laser forming Ultraprecision metal removal processing of mirror-surfaces, 269 An analytical model to estimate angle formed by laser, 314 Metallic sheets A study on the laser forming of near-alpha and metastable beta Studies on the prediction of springback in air vee bending of titanium alloy sheets, 376 metallic sheets using an artificial neural network, 45 Laser rapid solidification Metastable phase Directional growth of metastable phase y in laser-remelted Ti-—Al, Directional growth of metastable phase y in laser-remelted Ti—Al, 394 394 Laser welding Michelson interferometer Investigations of weld-line movements for the deep drawing pro- Measurement of magnetostriction and magnetic properties in an cess of tailor welded blanks, | open magnetic circuit, 221 Leakage field Microhardness Leakage field of a transformer under conventional and supercon- Production of metal matrix composite part by powder injection ducting condition, 246 molding, 398 Leakage inductance Microstructural control Leakage field of a transformer under conventional and supercon- Influence of oxygen content on the forging response of equiaxed ducting condition, 246 (a + B) preform of Ti-6AI-4V: commercial vs. ELI grade, 320 Levitation Microwave sintering Control of resonance for a rotating shaft levitated by the high Continuous microwave sintering of alumina abrasive grits, 26 temperature super conductor by using a rotating magnetic Milling damper, 161 Optimum Ti-C:H coatings on tungsten carbide inserts for milling Load-curve applications, 30 Design of load-curves for hydroforming applications, 97 Minimum circumscribed cone Lubrication A mathematical model for the evaluation of conically tapered parts, An overall review of the tube hydroforming (THF) technology, 8 384 Mirror-surface Ultraprecision metal removal processing of mirror-surfaces, 269 Machined surface roughness Mixed valance manganites Optimum Ti-C:H coatings on tungsten carbide inserts for milling Pulsed laser deposition of mixed valence manganite artificial applications, 30 superstructures, 193 Subject Index of Volume 108 Modeling Predicted square error criteria A study on the laser forming of near-alpha and metastable beta Modeling the surface roughness and cutting force for turning, titanium alloy sheets, 376 286 Motorcase Pre-forming Fabrication of 2024 aluminum spun tube using a thermomechanical An overall review of the tube hydroforming (THF) technology, treatment process, 294 384 Moulded gear Preisach—Neel model Study: temperature and residual stress in an injection moulded gear, Iron lamination efficient representation in power transformers, 217 328 Pressureless infiltration Movement Optimum conditions for pressureless infiltration of SiC, preforms Investigations of weld-line movements for the deep drawing pro- by aluminum alloys, 68 cess of tailor welded blanks, | Processing maps MREF-ECM Influence of oxygen content on the forging response of equiaxed MREF-ECM process for hard passive materials surface finishing, (x +B) preform of Ti-6AI-4V: commercial vs. ELI grade, 356 320 Multilayers Pulsed laser deposition Pulsed laser deposition of mixed valence manganite artificial Pulsed laser deposition of mixed valence manganite artificial superstructures, 193 superstructures, 193 Neural networks Radius-curve Optimum selection of machining conditions in abrasive flow Design of load-curves for hydroforming applications, 97 machining using neural network, 62 Regression analysis Deterministic and artificial intelligence approaches in optimizing Modeling the surface roughness and cutting force for turning, 286 permanent magnet generators for wind power applications, 232 Rod rolling Nodes Mathematical model and experimental validation of surface profile Modeling the surface roughness and cutting force for turning, 286 of a workpiece in round—oval-round pass sequence, 87 Numerical analysis Rotor Two-dimensional (vector) magnetic property and improved mag- Study on electric motors with bulk superconductors in the rotor, 148 netic field analysis for electrical machines, 225 Scanning electron microscopy One-step approach Large area YBaCuO and BSCCO coatings produced on different Simulation of sheet metal forming by a one-step approach: choice substrates by an electrophoretic deposition technique, 179 of element, 300 Shaft Open magnetic circuit Control of resonance for a rotating shaft levitated by the high Measurement of magnetostriction and magnetic properties in an temperature super conductor by using a rotating magnetic open magnetic circuit, 221 damper, 161 Optimal control Sheet metal A method for the optimal control of forging process variables using A study on the laser forming of near-alpha and metastable beta the finite element method and control theory, 40 titanium alloy sheets, 376 Optimal machining conditions Sheet metal forming Optimum selection of machining conditions in abrasive flow Experimental and numerical analysis of the cup drawing test for machining using neural network, 62 orthotropic metal sheets, 78 Optimization procedure Simulation of sheet metal forming by a one-step approach: choice Deterministic and artificial intelligence approaches in optimizing of element, 300 permanent magnet generators for wind power applications, 232 Shielding current model Oxygen effect Shielding current model and frozen field model in analysis of Influence of oxygen content on the forging response of equiaxed magnetic force between a bulk HTS and a magnet, 188 (x + B) preform of Ti-6AI-4V: commercial vs. ELI grade, 320 SiC,, preforms Optimum conditions for pressureless infiltration of SiC, preforms Permanent magnets by aluminum alloys, 68 Deterministic and artificial intelligence approaches in optimizing Simulation permanent magnet generators for wind power applications, Influence of friction on die filling in counterblow hammer forging, 232 21 Planar anisotropy Single sheet tester Experimental and numerical analysis of the cup drawing test for Measurement of magnetostriction and magnetic properties in an orthotropic metal sheets, 78 open magnetic circuit, 221] Polymer S-N curves High-temperature superconducting polymer-ceramic composi- Studies on the stress distribution and fatigue behavior of weld- tions, 201 bonded lap shear joints, 307 Polyvinylidene fluoride film Sol-gel technology Development of tactile sensor for monitoring skin conditions, 253 Materials selection applied to vitrified alumina & CBN grinding Powder injection molding wheels, 114 Production of metal matrix composite part by powder injection Springback molding, 398 Studies on the prediction of springback in air vee bending of Power and distribution transformers metallic sheets using an artificial neural network, 45 ALSTOM Hellas experience on power and distribution transfor- An experimental investigation of the influence of the Bauschinger mers, 257 effect on springback predictions, 369 414 Subject Index of Volume 108 Stainless steel Ti-6AI4V Experimental study of burr formation and tool chipping in the face Influence of oxygen content on the forging response of equiaxed milling of stainless steel, 12 (a + B) preform of Ti-6Al-4V: commercial vs. ELI grade, 320 Strain distribution TiC Investigations of weld-line movements for the deep drawing pro- Production of metal matrix composite part by powder injection cess of tailor welded blanks, | molding, 398 Stress-wave propagation Titanium alloys On the modelling of the compaction mechanism of shock com- A study on the laser forming of near-alpha and metastable beta pacted powders, 165 titanium alloy sheets, 376 Superconducting Titanium aluminide A study on the relaxation of levitation property in an HTSC Electrochemical machining of gamma titanium aluminide inter- magnetic bearing, 152 metallics, 338 Superconductivity Tool chipping High-temperature superconducting polymer—ceramic composi- Experimental study of burr formation and tool chipping in the face tions, 201 milling of stainless steel, 12 Superconductor Transformer Study on electric motors with bulk superconductors in the rotor, Effective use of magnetic materials in transformer manufacturing, 148 209 Analysis of magnetic relaxation in a thin disk of YBa,Cu3;07_; Leakage field of a transformer under conventional and supercon- superconductor, 156 ducting condition, 246 Control of resonance for a rotating shaft levitated by the high Transportation temperature super conductor by using a rotating magnetic Near net-shape manufacturing of bulk ceramic high-7.. supercon- damper, 161 ductors for application in electricity and transportation, 126 Screening effects of the excimer laser produced plasma of Tube YBa>Cu,0,, 197 An overall review of the tube hydroforming (THF) technology, 384 Superplasticity Tube spinning Superplastic boronizing of a low alloy steel — microstructural Fabrication of 2024 aluminum spun tube using a thermomechanical aspects, 349 treatment process, 294 Surface finishing Turning MREF-ECM process for hard passive materials surface finishing, Design of a dynamic vibration absorber against vibrations in 356 turning operations, 278 Surface hardness Turning process Electrochemical machining of gamma titanium aluminide inter- Fuzzy logic based data selection for the drilling proces metallics, 338 Two-dimensional magnetic properties Surface profile Two-dimensional (vector) magnetic property and improved mag- Mathematical model and experimental validation of surface profile netic field analysis for electrical machines, 225 of a workpiece in round—oval-round pass sequence, 87 Ultraprecision Taguchi methods Ultraprecision metal removal processing of mirror-surfaces, 269 Effective use of magnetic materials in transformer manufacturing, 209 Vibration Tailor welded blanks (TWBs) Control of resonance for a rotating shaft levitated by the high Investigations of weld-line movements for the deep drawing pro- temperature super conductor by using a rotating magnetic cess of tailor welded blanks, | damper, 161 TEAM workshop Problem 7 Vibration control Computation results of the TEAM workshop Problem 7 by finite Design of a dynamic vibration absorber against vibrations in element methods using tetrahedral and hexahedral elements, turning operations, 278 237 Vitrified alumina Temperature and residual stresses Materials selection applied to vitrified alumina & CBN grinding Study: temperature and residual stress in an injection moulded gear, wheels, 114 328 Vortex matter phase diagram Tetrahedral edge element Single crystal growth and vortex matter phase diagram in Computation results of the TEAM workshop Problem 7 by finite HgBa,CuO,., superconductor, 145 element methods using tetrahedral and hexahedral elements, 237 Wear resistance Thermomechanical treatment Optimum Ti-C:H coatings on tungsten carbide inserts for milling Fabrication of 2024 aluminum spun tube using a thermomechanical applications, 30 treatment process, 294 Weld line Thin film Investigations of weld-line movements for the deep drawing pro- Analysis of magnetic relaxation in a thin disk of YBa>Cu307_, cess of tailor welded blanks, | superconductor, 156 Weld-bonded joint Ti,.y-C:H Studies on the stress distribution and fatigue behavior of weld- Optimum Ti-C:H coatings on tungsten carbide inserts for milling bonded lap shear joints, 307 applications, 30 Ti—-Al alloy X-ray diffraction analysis Directional growth of metastable phase y in laser-remelted Ti—Al, Large area YBaCuO and BSCCO coatings produced on different 394 substrates by an electrophoretic deposition technique, 179 Subject Index of Volume 108 X-ray wavelength dispersive spectra YBCO Superplastic boronizing of a low alloy steel — microstructural Large area YBaCuO and BSCCO coatings produced on different aspects, 349 substrates by an electrophoretic deposition technique, 179 Yield surface YBa2Cu307_, superconductors Experimental and numerical analysis of the cup drawing test for Application of double diffusivity model to superconductors, 185 orthotropic metal sheets, 78