Table Of Content

Materials Processing Technology R Journal of Materials Processing Technology 87 (1999) 293 Author Index of Volume 87 Arnet, H., 1 Huang, J.T., 69 Pantelakis, $.G., 281 Park, H.J., 46 Baaijens, F.P.T., 266 Jiang, B., 97 Park, J.-J., 146 Balendra, R., 28 Jiang, H., 97 Park, S.B., 258 Bernhart, G., 237 Brekelmans, W.A.M., 266 Kampu8§, Z., 90 Rodrigues, J.M.C., 247 Brokken, D., 266 Kao, W.H., 82 Brucelle, O., 237 Karshakov, M.K., 64 Saito, Y., 207 Karthikeyan, R., 59 Savov, S.I1., 64 Chan, F.T.S., 97 Kermanidis, T.B., 281 Shi, Y., 230 Chang, B., 230 Kim, B.M., 46, 258 Sobolev, V.V., 37 Chen, S.L., 107, 112 Kong, L.X., 131 Sprenger, A., 1 Choi, J.C., 46, 258 Kraus, J., 1 Stahlberg, U., 223 Choi, Y., 258 Kumar, E., 119 Stegeman, Y.W., 266 Choudhury, S.K., 119 Kuo, M., 213 Sun, Z., 213 Chow, H.M., 112, 139 Kyrsanidi, A.K., 281 ou; 3... 277 Su, T.-T., 198 Davies, C.H.J., 131 Lakshmi Narayanan, P.R., 59 Su, Y.L., 82 Dong, S., 230 Lau, H., 97 Duan, R.-G., 192 Lee, W.-S., 198 Thiruvarudchelvan, S., 128 Lewis, W., 128 Tsai, J.Y., 139 Ferguson, W.H., 28 Liang, K.-M., 192 Fernandes, J.L.M., 247 Liao, Y.S., 69 Utsunomiya, H., 207 Li, G., 277 Ghosh, A., 119 Li, M., 277 Vasillev, V.V., 64 Goijaerts, A.M., 266 Lam, Y., 53, 277 Vollertsen, F., 1, 154 Gotoh, M., 165, 179 Lm ¥. 3a Govaert, L.E., 266 Wei, C.S., 82 Grigorov, V.I., 64 Martins, P.A.F., 247 Wu, C.T., 82 Guilemany, J.M., 37 Martin, A.J., 37 Gu, S.-R., 192 Matsueda, S., 207 Yan, B.H., 107, 139 Yang, G., 53 Hallstrom, J., 223 Naagarazan, R.S., 59 Yang, L., 53 Hein, P., 154 Nageswara Rao, B., 291 Yan, K.A., 112 Hodgson, P.D., 131 Narayana Murty, S.V.S., 291 Yao, S.H., 82 Hsue, W.J., 69 Huang, F.Y., 107, 112, 139 Ou, H., 28 Zhu, J., 165, 179 Elsevier Science S.A. PIT $0924-0136(98)00373-2 Journal of Materials Processing aSE AA uy| Technology ELSEVIER Journal of Materials Processing Technology 87 (1999) 294—297 Subject Index of Volume 87 Accuracy Channel sections analysis of factors influencing accuracy in the drawing of round extrusion, channel, and profile bending: a review, | rods, 90 Contrast correlation technique Adaptive turning operations an experimental and numerical study of a planar blanking process, a scheme of adaptive turning operations, 119 266 Additives Control the effect of additives on the crystallization of Na,O—CaO- extrusion, channel, and profile bending: a review, | MgO-AI,0,—SiO,—TiO, system glasses, 192 Counter-blow hammer AISI 4340 a comparison between two wear models, 223 mechanical properties and microstructural features of AISI 4340 Crystallization high-strength alloy steel under quenched and tempered con- the effect of additives on the crystallization of Na,O—CaO- MgO-AI,0,-—SiO,—TiO, system glasses, 192 ditions, 198 Cutting tool Aluminium a scheme of adaptive turning operations, 119 extrusion, channel, and profile bending: a review, | Damping capacity Aluminium cups damping behavior and tribological properties of as-spray-de- the redrawing of cups at a redraw ratio of 3 using an annular posited high silicon alloy ZA27, 53 urethane pad, 128 Deep drawing die-set Aluminum sheet A CAD/CAM system for deep drawing dies in a simple-action predictions of texture and plastic anisotropy developed by me- press, 258 chanical deformation in aluminum sheet, 146 Deformation characteristics Automatic modeling proposal of a new method for the spread rolling of thin strips, 207 A CAD/CAM system for deep drawing dies in a simple-action Deformation field press, 258 an experimental and numerical study of a planar blanking process, Automatic remeshing 266 automatic remeshing of 2D quadrilateral elements and its applica- Diameter tion to continuous deformation simulation: part II. applica- neutralising the influence of spread on the diameter of processed tions, 179 holes by means of surface plastic deformation, 64 Bending Dielectrics extrusion, channel, and profile bending: a review, 1 influence of kerosene and distilled water as dielectrics on the Blanking die-set electric discharge machining characteristics of Ti-6A1—4V, A CAD/CAM system for deep drawing dies in a simple-action 107 press, 258 Dies Boundary-elements methodology for service life increase of hot forging tools, 237 combined finite element—boundary element thermo-mechanical Diffusion wear analysis of metal forming processes, 247 the machinability of KOVAR material, 112 BUE Discontinuous reinforcement the machinability of KOVAR material, 112 mathematical modelling for electric discharge machining of alu- CAD/CAM minium-silicon carbide particulate composites, 59 an automatic process planning system for the quick generation of Drawing manufacturing process plans directly from CAD drawings, 97 analysis of factors influencing accuracy in the drawing of round CAD/CAM system rods, 90 A CAD/CAM system for deep drawing dies in a simple-action Dynamic recrystallisation press, 258 the prediction of the hot strength in steels with an integrated Caliber rolling phenomenological and artificial neural network model, 131 proposal of a new method for the spread rolling of thin strips, 207 Elastic characteristics CAPP assessment of the elastic characteristics of an ‘infinite stiffness’ an automatic process planning system for the quick generation of physical modelling press, 28 manufacturing process plans directly from CAD drawings, 97 Elasto-plasticity Carbide analysis of factors influencing accuracy in the drawing of round micro-hole machining of carbide by electric discharge machining, rods, 90 139 Electrical discharge machining Carbon steel influence of kerosene and distilled water as dielectrics on the electric bridging the joint gap with wire feed laser welding, 213 discharge machining characteristics of Ti-6A1—4V, 107 Elsevier Science S.A. PIT $0924-0136(98)00374-4 PT AS AN Ee Subject Index of Volume 87 Electric discharge machining Heat affected zone mathematical modelling for electric discharge machining of alu- bridging the joint gap with wire feed laser welding, 213 minium-silicon carbide particulate composites, 59 Heat treatment micro-hole machining of carbide by electric discharge machining, the effect of additives on the crystallization of Na,O—CaO- 139 MgO-AI,0,—Si0,—TiO, system glasses, 192 Electrode wear ratio High-strength alloy steel micro-hole machining of carbide by electric discharge machining, mechanical properties and microstructural features of AISI 4340 139 high-strength alloy steel under quenched and tempered con- Expansion ditions, 198 micro-hole machining of carbide by electric discharge machining, Hollow bodies 139 hydroforming of sheet metal pairs, 154 Experimental investigation Hot forging numerical and experimental investigation of the laser forming methodology for service life increase of hot forging tools, 237 process, 281 Hot rolling Expert system the prediction of the hot strength in steels with an integrated an automatic process planning system for the quick generation of phenomenological and artificial neural network model, 131 manufacturing process plans directly from CAD drawings, Hydroforming 97 hydroforming of sheet metal pairs, 154 Extrapolation Induction heating the prediction of the hot strength in steels with an integrated the influence of induction heating on the microstructure of A356 phenomenological and artificial neural network model, 131 for semi-solid forging, 46 Extrusion In-flight behaviour extrusion, channel, and profile bending: a review, | in-flight behaviour of steel particles during plasma spraying, 37 Factor IPANN model design and performance analysis of TiCN-coated cemented car- the prediction of the hot strength in steels with an integrated bide milling cutters, 82 phenomenological and artificial neural network model, 131 FE analysis Joint gap bridging the joint gap with wire feed laser welding, 213 assessment of the elastic characteristics of an ‘infinite stiffness’ KOVAR physical modelling press, 28 the machinability of KOVAR material, 112 automatic remeshing of 2D quadrilateral elements and its appli- Laser forming cation to continuous deformation simulation: part I. numerical and experimental investigation of the laser forming remeshing algorithm, 165 process, 281 FE simulation Laser welding automatic remeshing of 2D quadrilateral elements and its appli- bridging the joint gap with wire feed laser welding, 213 cation to continuous deformation simulation: part II. appli- Lateral spread cations, 179 proposal of a new method for the spread rolling of thin strips, Filler wire 207 bridging the joint gap with wire feed laser welding, 213 Level Finish cutting design and performance analysis of TiCN-coated cemented car- determination of finish-cutting operation number and machin- bide milling cutters, 82 ing-parameters setting in wire electrical discharge machin- Machining parameters ing, 69 determination of finish-cutting operation number and machin- Finite element ing-parameters setting in wire electrical discharge machin- comparative studies on stresses in weld-bonded, spot-welded and ing, 69 adhesive-bonded joints, 230 Measurement Finite-element method assessment of the elastic characteristics of an ‘infinite stiffness’ analysis of factors influencing accuracy in the drawing of round physical modelling press, 28 rods, 90 Mesh re-generation Finite elements automatic remeshing of 2D quadrilateral elements and its appli- hydroforming of sheet metal pairs, 154 cation to continuous deformation simulation: part I. Finite-elements remeshing algorithm, 165 combined finite element—boundary element thermo-mechanical Metal forming analysis of metal forming processes, 247 combined finite element—boundary element thermo-mechanical Flexible manufacturing analysis of metal forming processes, 247 multi-point forming: a flexible manufacturing method for a 3-d Metal matrix composites surface sheet, 277 mathematical modelling for electric discharge machining of alu- Full-scale experiments minium-silicon carbide particulate composites, 59 a comparison between two wear models, 223 Micro-hole Globular microstructure micro-hole machining of carbide by electric discharge machining, the influence of induction heating on the microstructure of A356 139 for semi-solid forging, 46 Microstructure Group technology bridging the joint gap with wire feed laser welding, 213 an automatic process planning system for the quick generation of Modelling manufacturing process plans directly from CAD drawings, hydroforming of sheet metal pairs, 154 97 Multi-point forming Hardness multi-point forming: a flexible manufacturing method for a 3-d bridging the joint gap with wire feed laser welding, 213 surface sheet, 277 296 Subject Index of Volume 87 Numerical simulation Sheet metal methodology for service life increase of hot forging tools, 237 an experimental and numerical study of a planar blanking pro- numerical and experimental investigation of the laser forming cess, 266 process, 281 Sheet metal forming Offset hydroforming of sheet metal pairs, 154 determination of finish-cutting operation number and machin- multi-point forming: a flexible manufacturing method for a 3-d ing-parameters setting in wire electrical discharge machin- surface sheet, 277 ing, 69 Signal-to-noise ratio Particle mass loss design and performance analysis of TiCN-coated cemented car- in-flight behaviour of steel particles during plasma spraying, 37 bide milling cutters, 82 Percentage contribution Simulation design and performance analysis of TiCN-coated cemented car- extrusion, channel, and profile bending: a review, | bide milling cutters, 82 | Single-side notch Physical modelling press micro-hole machining of carbide by electric discharge machining, assessment of the elastic characteristics of an ‘infinite stiffness’ 139 physical modelling press, 28 Soaking period Planar blanking the influence of induction heating on the microstructure of A356 an experimental and numerical study of a planar blanking pro- for semi-solid forging, 46 cess, 266 Solid fraction Plasma-—particle interactions the influence of induction heating on the microstructure of A356 in-flight behaviour of steel particles during plasma spraying, 37 for semi-solid forging, 46 Plasma spraying Spead in-flight behaviour of steel particles during plasma spraying, 37 neutralising the influence of spread on the diameter of processed Plastic anistrophy holes by means of surface plastic deformation, 64 predictions of texture and plastic anisotropy developed by me- Spray deposition chanical deformation in aluminum sheet, 146 damping behavior and tribological properties of as-spray-de- Plastic deformation posited high silicon alloy ZA27, 53 automatic remeshing of 2D quadrilateral elements and its appli- Spread rolling cation to continuous deformation simulation: part II. appli- proposal of a new method for the spread rolling of thin strips, cations, 179 207 automatic remeshing of 2D quadrilateral elements and its appli- Stainless steel cation to continuous deformation simulation: part I. bridging the joint gap with wire feed laser welding, 213 remeshing algorithm, 165 Steel Plasticene extrusion, channel, and profile bending: a review, 1 proposal of a new method for the spread rolling of thin strips, Step heating 207 the influence of induction heating on the microstructure of A356 Polarity for semi-solid forging, 46 micro-hole machining of carbide by electric discharge machining, Stress analysis 139 comparative studies on stresses in weld-bonded, spot-welded and Polycrystalline adhesive-bonded joints, 230 predictions of texture and plastic anisotropy developed by me- Strip rolling chanical deformation in aluminum sheet, 146 proposal of a new method for the spread rolling of thin strips, Processed holes 207 neutralising the influence of spread on the diameter of processed Surface plastic deformation holes by means of surface plastic deformation, 64 neutralising the influence of spread on the diameter of processed Processes holes by means of surface plastic deformation, 64 extrusion, channel, and profile bending: a review, 1 Surface roughness Profiles the machinability of KOVAR material, 112 extrusion, channel, and profile bending: a review, 1 System development Quadrilateral elements automatic remeshing of 2D quadrilateral elements and its appli- automatic remeshing of 2D quadrilateral elements and its appli- cation to continuous deformation simulation: part II. appli- cation to continuous deformation simulation: part I. cations, 179 remeshing algorithm, 165 Taguchi method Redrawing experiments determination of finish-cutting operation number and machin- the redrawing of cups at a redraw ratio of 3 using an annular ing-parameters setting in wire electrical discharge machin- urethane pad, 128 ing, 69 Roll pass design Tempering proposal of a new method for the spread rolling of thin strips, mechanical properties and microstructural features of AISI 4340 207 high-strength alloy steel under quenched and tempered con- Rules base ditions, 198 A CAD/CAM system for deep drawing dies in a simple-action Tensile strength press, 258 bridging the joint gap with wire feed laser welding, 213 Semi-solid forging Thermal cracking the influence of induction heating on the microstructure of A356 methodology for service life increase of hot forging tools, 237 for semi-solid forging, 46 Thermal stress Service life numerical and experimental investigation of the laser forming methodology for service life increase of hot forging tools, 237 process, 281 Subject Index of Volume 87 Thermo-mechanical Tribological properties combined finite element—boundary element thermo-mechanical damping behavior and tribological properties of as-spray-de- analysis of metal forming processes, 247 posited high silicon alloy ZA27, 53 The smaller the better Urethane pad design and performance analysis of TiCN-coated cemented car- the redrawing of cups at a redraw ratio of 3 using an annular bide milling cutters, 82 urethane pad, 128 Three-dimensional surface Wear multi-point forming: a flexible manufacturing method for a 3-d a comparison between two wear models, 223 surface sheet, 277 Weld-bond Ti-6A1-4V comparative studies on stresses in weld-bonded, spot-welded and influence of kerosene and distilled water as dielectrics on the adhesive-bonded joints, 230 electric discharge machining characteristics of Ti-6A1—4V, Weld metal 107 bridging the joint gap with wire feed laser welding, 213 Tool design Wire electrical discharge machining A CAD/CAM system for deep drawing dies in a simple-action determination of finish-cutting operation number and machin- press, 258 ing-parameters setting in wire electrical discharge machin- Tool path generation ing, 69 A CAD/CAM system for deep drawing dies in a simple-action Work-hardening press, 258 the prediction of the hot strength in steels with an integrated Tools phenomenological and artificial neural network model, 131 methodology for service life increase of hot forging tools, 237 Zinc—aluminium alloy Tool wear damping behavior and tribological properties of as-spray-de- a scheme of adaptive turning operations, 119 posited high silicon alloy ZA27, 53