Table Of Content

Journal of Materials Processing Technology Journal of Materials Processing Technology 83 (1998) 299 Author Index of Volume 83 Gu, M.X., 164 Miao, M.H., 180 Aiming, X., 159 Guotao, W., 159 Momber, A.W., 121 Al-Jalil, H.F., 176 Gusek, C.O., 223 Moshksar, M.M., 115 Baaijens, F.P.T., 192 Hassan, A.M., 176 Neri, M.A., 142 Balasubramaniam, M., 54 He, J., 209 Nielsen, K.B., 98, 106 Besshi, T., 185 Huang, Y.-M., 26 Bleck, W., 223 Huang, Y.P., 267 Ong, N.S., 261 Brekelmans, W.A.M., 192 Huétink, J., 234 Brokken, D., 192 Huimin, X., 159 Papamantellos, K., 223 Hu, J., 200 Rajaram, H., 54 Carleer, B.D., 234 Ramamurti, V., 54 Chan, K., 180 Ikeda, K., 200 Chen, C.-K., 217, 231 Ishikawa, T., 200 Sato, T., 185 Cho, H.Y., 84 Sklad, M., 151, 277 Choi, J.C., 84 Jensen, M.R., 98, 106 Szalay, A., 48 Chua, C.K., 36 Jung, D.W., 245 Chua, G.S., 36 Tan, C.H., 36 Colas, R., 142 Kan, C.W., 180 Thomson, P.F., 62 Kassab, S.Z, 72 Damborg, F.F., 98, 106 Khoddam, S., 62 Valtierra, S., 142 Danckert, J., 14, 98, 106 Kim, B.M., 84 Vaxevanidis, N.M., 48 Deng, Z., 223 Kim, C., 84 Venkatesh, V.C., 261 Dutilly, M., 170 Kim, J.H., 84 Kuo, T.-Y., 217, 231 Wang, H.J., 286 Ebied, A.A., 176 Wang, Q.L., 286 Edmonds, D.V., 1 Lam, Y.C., 62 Wilcox, J.A.D., 131 El-Domiaty, A., 72 Leong, K.F., 36 Wright, D.T., 131 El-Gallab, M., 151, 277 Liang, J.Z., 127 Li, C.-L., 26 Xingfu, L., 159 Fangju, Z., 159 Li, R.K.Y., 127 Xu, K., 209 Fulong, D., 159 Liu, D., 164 Fu, Y., 209 Luo, Z.J., 164 Yang, D.Y., 245 Yuen, C.W.M., 180 Geijselaers, H.J.M., 234 Mamalis, A.G., 48 Gelin, J.C., 170 Manolakos, D.E., 48 Zhang, S.H., 14 Ghouati, O., 170 Marzban Rad, E., 115 Zheng, B., 286 Guangjun, Z., 159 Meinders, T., 234 Zhu, X., 209 Elsevier Science S.A. PIT 80924-0136(98)00260-X Journal of Materials Processing Technology Journal of Materials Processing Technology 83 (1998) 300—303 Subject Index of Volume 83 Abrasive jet deburring Cold-rolled steels abrasive jet deburring of jewellery models built by stereolithogra- a comparative study of the forming-limit diagram models for phy apparatus (SLA), 36 sheet steels, 223 Abrasive—water-jet erosion Composite (bimetallic) the kinetic energy of wear particles generated by abrasive—water- fabrication of bimetallic rods by explosive cladding and warm jet erosion, 121 extrusion, 48 Aluminum alloys Computer-aided design and manufacturing front image sensing of the keyhole puddle in the variable polarity abrasive jet deburring of jewellery models built by stereolithogra- PAW of aluminum alloys, 286 phy apparatus (SLA), 36 Aluminum-—magnesium-—manganese alloy Conventional deep-drawing analysis on earing behavior of textured pure aluminum and applying the finite-element method for determination of tool A5083 alloy sheets, 200 wear in conventional deep-drawing, 98 Aluminum sheet Cup-drawing anti-galling evaluation in aluminum sheet forming, 185 limiting drawing ratio of the cup-drawing process with stabiliza- Anisotropy tion matrices approach, 26 analysis on earing behavior of textured pure aluminum and Cutter manufacture A5083 alloy sheets, 200 the theory of center offset and its application in cutter manufac- Anti-galling ture, 217 anti-galling evaluation in aluminum sheet forming, 185 Artificial neural networks towards pultrusion process optimisation using artificial neural Debinding networks, 131 finite-element analysis of the debinding and densification phe- Autobody stamping nomena in the process of metal injection molding, 170 step-wise combined implicit—explicit finite-element simulation of Deep-drawing autobody stamping processes, 245 development of hydro-mechanical deep drawing, 14 Automatic local mesh subdivision optimization of the draw-die design in conventional deep-draw- the algorithm of automatic local mesh subdivision and its appli- ing in order to minimise tool wear, 106 cation to finite-element analysis of a large deformation Densification forming process, 164 finite-element analysis of the debinding and densification phe- nomena in the process of metal injection molding, 170 Ball passes Discontinuous Galerkin burnishing force and number of ball passes for the optimum numerical modelling of the metal blanking process, 192 surface finish of brass components, 176 Discrete crack approach Behavior numerical modelling of the metal blanking process, 192 quality control in the drawing operation of two-piece printed Drawbead cans, 267 the implementation of an equivalent drawbead model in a finite- Blanking element code for sheet metal forming, 234 an integrated CAD system for the blanking of irregular-shaped Drawing ratio sheet metal products, 84 limiting drawing ratio of the cup-drawing process with stabiliza- Bonding strength tion matrices approach, 26 mechanical and tribological properties of ion-beam-enhanced- Drive shaft deposition TiN thin films, 209 dynamic analysis of two types of over-crank guillotine shears—a Burnishing force burnishing force and number of ball passes for the optimum comparative study, 54 Ductile fracture surface finish of brass components, 176 numerical modelling of the metal blanking process, 192 Chip formation mechanism Dynamic behavior machining of Al/SiC particulate metal matrix composites: Part dynamic analysis of two types of over-crank guillotine shears—a II: Workpiece surface integrity, 277 comparative study, 54 Cladding Dynamic deformation fabrication of bimetallic rods by explosive cladding and warm the dynamic deformation measurement of the high speed heated extrusion, 48 LY12 aluminium plate with moire interferometry, 159 Elsevier Science S.A. PIT $0924-0136(98)00262-3 Subject Index of Volume 83 Earing Inverse method analysis on earing behavior of textured pure aluminum and inverse computational method for constitutive parameters ob- A5083 alloy sheets, 200 tained from torsion, plane-strain and axisymmetric com- pression tests, 62 Fast heating Ion-beam-enhanced deposition (IBED) the dynamic deformation measurement of the high speed mechanical and tribological properties of ion-beam-enhanced- heated LY12 aluminium plate with moire interferometry, deposition TiN thin films, 209 159 Isothermal annealing Filled composites effect of deformation on graphitization kinetics in high carbon prediction of tensile yield strength of rigid inorganic particulate steels, 142 filled thermoplastic composites, 127 Finite element Jewellery applying the finite-element method for determination of tool abrasive jet deburring of jewellery models built by stereolithog- wear in conventional deep-drawing, 98 raphy apparatus (SLA), 36 optimization of the draw-die design in conventional deep-drawing in order to minimise tool wear, 106 Keyhole puddle the implementation of an equivalent drawbead model in a front image sensing of the keyhole puddle in the variable finite-element code for sheet metal forming, 234 polarity PAW of aluminum alloys, 286 Finite-element method Kinetic energy the algorithm of automatic local mesh subdivision and its ap- the kinetic energy of wear particles generated by abrasive— plication to finite-element analysis of a large deformation water-jet erosion, 121 forming process, 164 Finite-element model Large deformation forming processes numerical modelling of the metal blanking process, 192 the algorithm of automatic local mesh subdivision and its ap- Finite-element simulation plication to finite-element analysis of a large deformation step-wise combined implicit—explicit finite-element simulation forming process, 164 of autobody stamping processes, 245 Low-temperature plasma treatment Formability surface properties of low-temperature plasma treated wool fab- a comparative study of the forming-limit diagram models for rics, 180 sheet steels, 223 Lubrication Forming-limit diagram temperature rise in wire-drawing, 72 a comparative study of the forming-limit diagram models for sheet steels, 223 Machining Front image sensing machining of Al/SiC particulate metal matrix composites: Part front image sensing of the keyhole puddle in the variable po- II: Workpiece surface integrity, 277 larity PAW of aluminum alloys, 286 Mapping quality control in the drawing operation of two-piece printed cans, 267 Graphitization kinetics Mathematical model effect of deformation on graphitization kinetics in high carbon a study of the geometrical models of grinding a spheroid, 231 steels, 142 the theory of center offset and its application in cutter manufacture, 217 High-carbon steel Mechanical testing effect of deformation on graphitization kinetics in high carbon inverse computational method for constitutive parameters ob- steels, 142 tained from torsion, plane-strain and axisymmetric com- effect of temperature and strain rate on the superplastic be- pression tests, 62 haviour of high-carbon steel, 115 Metal forming High frequency high temperature grating anti-galling evaluation in aluminum sheet forming, 185 the dynamic deformation measurement of the high speed Metal injection molding heated LY12 aluminium plate with moire interferometry, finite-element analysis of the debinding and densification phe- 159 nomena in the process of metal injection molding, 170 High-strength steel Metal-matrix composites a comparative study of the forming-limit diagram models for machining of Al/SiC particulate metal matrix composites: Part sheet steels, 223 II: Workpiece surface integrity, 277 Hydro-mechanical machining of Al/SiC particulate metal-matrix composites: Part development of hydro-mechanical deep drawing, 14 I: Tool performance, 151 Microhardness Implicit—explicit scheme mechanical and tribological properties of ion-beam-enhanced- step-wise combined implicit—explicit finite-element simulation deposition TiN thin films, 209 of autobody stamping processes, 245 Microstructure Industry mechanical and tribological properties of ion-beam-enhanced- innovation in the processing of tonnage materials: examples deposition TiN thin films, 209 from the steel and aluminium industries, 1 Moire interferometry Integrated CAD system the dynamic deformation measurement of the high speed an integrated CAD system for the blanking of irregular-shaped heated LY12 aluminium plate with moire interferometry, sheet metal products, 84 159 302 Subject Index of Volume 83 Numerical optimization Sheet metal products inverse computational method for constitutive parameters ob- an integrated CAD system for the blanking of irregular-shaped tained from torsion, plane-strain and axisymmetric compres- sheet metal products, 84 sion tests, 62 Solution accuracy Numerical simulations step-wise combined implicit—explicit finite-element simulation of development of hydro-mechanical deep drawing, 14 autobody stamping processes, 245 Spheroid Optimim surface finish a study of the geometrical models of grinding a spheroid, 231 burnishing force and number of ball passes for the optimum Stabilization matrices surface finish of brass components, 176 limiting drawing ratio of the cup-drawing process with stabiliza- Optimization tion matrices approach, 26 optimization of the draw-die design in conventional deep-draw- Stainless steel ing in order to minimise tool wear, 106 applying the finite-element method for determination of tool towards pultrusion process optimisation using artificial neural wear in conventional deep-drawing, 98 networks, 131 optimization of the draw-die design in conventional deep-draw- Over-crank guillotine shears ing in order to minimise tool wear, 106 dynamic analysis of two types of over-crank guillotine shears—a Static behavior comparative study, 54 dynamic analysis of two types of over-crank guillotine shears—a comparative study, 54 Plastic deformation temperature rise in wire-drawing, 72 Stereolithography apparatus Polishing abrasive jet deburring of jewellery models built by stereolithogra- semi-ductile grinding and polishing of Pyrex glass, 261 phy apparatus (SLA), 36 Preston’s coefficient Strain rate semi-ductile grinding and polishing of Pyrex glass, 261 effect of temperature and strain rate on the superplastic be- Process modelling haviour of high-carbon steel, 115 towards pultrusion process optimisation using artificial neural Superplastic behavior networks, 131 effect of temperature and strain rate on the superplastic be- Production haviour of high-carbon steel, 115 innovation in the processing of tonnage materials: examples from Surface finish the steel and aluminium industries, 1 abrasive jet deburring of jewellery models built by stereolithogra- Profile error phy apparatus (SLA), 36 a study of the geometrical models of grinding a spheroid, 231 Surface integrity Pultrusion machining of Al/SiC particulate metal matrix composites: Part towards pultrusion process optimisation using artificial neural II: Workpiece surface integrity, 277 networks, 131 Surface properties Pure aluminum surface properties of low-temperature plasma treated wool fab- analysis on earing behavior of textured pure aluminum and rics, 180 A5083 alloy sheets, 200 Surface roughness semi-ductile grinding and polishing of Pyrex glass, 261 Quality control quality control in the drawing operation of two-piece printed Tensile instability cans, 267 a comparative study of the forming-limit diagram models for sheet steels, 223 Rapid prototyping Texture abrasive jet deburring of jewellery models built by stereolithogra- analysis on earing behavior of textured pure aluminum and phy apparatus (SLA), 36 A5083 alloy sheets, 200 Remeshing Theory of center offset numerical modelling of the metal blanking process, 192 the theory of center offset and its application in cutter manufac- Rigid particles ture, 217 prediction of tensile yield strength of rigid inorganic particulate Thermoplastics filled thermoplastic composites, 127 prediction of tensile yield strength of rigid inorganic particulate Rigid viscoplastic finite-element simulation filled thermoplastic composites, 127 inverse computational method for constitutive parameters TiN film obtained from torsion, plane-strain and axisymmetric com- mechanical and tribological properties of ion-beam-enhanced-de- pression tests, 62 position TiN thin films, 209 Semi-ductile grinding Tonnage materials semi-ductile grinding and polishing of Pyrex glass, 261 innovation in the processing of tonnage materials: examples from Sheet metal the steel and aluminium industries, 1 analysis on earing behavior of textured pure aluminum and Tool materials A5083 alloy sheets, 200 anti-galling evaluation in aluminum sheet forming, 185 Sheet metal blanking Tool wear numerical modelling of the metal blanking process, 192 applying the finite-element method for determination of tool Sheet metal forming wear in conventional deep-drawing, 98 the implementation of an equivalent drawbead model in a finite- machining of Al/SiC particulate metal-matrix composites: Part I: element code for sheet metal forming, 234 Tool performance, 151 Subject Index of Volume 83 optimization of the draw-die design in conventional deep-drawing Warm extrusion in order to minimise tool wear, 106 fabrication of bimetallic rods by explosive cladding and warm Transformation-induced plasticity extrusion, 48 a comparative study of the forming-limit diagram models for sheet Wear model steels, 223 applying the finite-element method for determination of tool wear Tribology in conventional deep-drawing, 98 Wear particles mechanical and tribological properties of ion-beam-enhanced-de- the kinetic energy of wear particles generated by abrasive—water- position TiN thin films, 209 jet erosion, 121 Two-piece DRD can Wire-drawing quality control in the drawing operation of two-piece printed cans, temperature rise in wire-drawing, 72 267 Wool fabrics surface properties of low-temperature plasma treated wool fabrics, Visible keyhole area 180 front image sensing of the keyhole puddle in the variable polarity PAW of aluminum alloys, 286 VPPAW Yield strength front image sensing of the keyhole puddle in the variable polarity prediction of tensile yield strength of rigid inorganic particulate PAW of aluminum alloys, 286 filled thermoplastic composites, 127