ebook img

Introduction to SolidWorks: A Comprehensive Guide with Applications in 3D Printing PDF

1194 Pages·2017·74.01 MB·English
Save to my drive
Quick download
Download
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Introduction to SolidWorks: A Comprehensive Guide with Applications in 3D Printing

Introduction to SOLIDWORKS A Comprehensive Guide with Applications in 3D Printing Introduction to SOLIDWORKS A Comprehensive Guide with Applications in 3D Printing GODFREY C. ONWUBOLU Boca Raton London New York CRC Press is an imprint of the Taylor & Francis Group, an informa business CRC Press Taylor & Francis Group 6000 Broken Sound Parkway NW, Suite 300 Boca Raton, FL 33487-2742 © 2017 by Taylor & Francis Group, LLC CRC Press is an imprint of Taylor & Francis Group, an Informa business No claim to original U.S. Government works Printed on acid-free paper Version Date: 20160706 International Standard Book Number-13: 978-1-4987-3119-5 (Pack - Book and Ebook) This book contains information obtained from authentic and highly regarded sources. Reasonable efforts have been made to publish reliable data and information, but the author and publisher cannot assume responsibility for the validity of all materials or the consequences of their use. The authors and publishers have attempted to trace the copyright holders of all material reproduced in this publication and apologize to copyright holders if permission to publish in this form has not been obtained. If any copyright material has not been acknowledged please write and let us know so we may rectify in any future reprint. Except as permitted under U.S. Copyright Law, no part of this book may be reprinted, reproduced, transmitted, or utilized in any form by any electronic, mechanical, or other means, now known or hereafter invented, including photocopying, microfilming, and recording, or in any information storage or retrieval system, without written permission from the publishers. For permission to photocopy or use material electronically from this work, please access www.copyright.com (http://www.copyright.com/) or contact the Copyright Clearance Center, Inc. (CCC), 222 Rosewood Drive, Danvers, MA 01923, 978-750-8400. CCC is a not-for-profit organization that provides licenses and registration for a variety of users. For organizations that have been granted a photocopy license by the CCC, a separate system of payment has been arranged. Trademark Notice: Product or corporate names may be trademarks or registered trademarks, and are used only for identification and explanation without intent to infringe. Library of Congress Cataloging‑in‑Publication Data Names: Onwubolu, Godfrey C., author. Title: Introduction to SolidWorks : a comprehensive guide with applications in 3D printing / Godfrey C. Onwubolu. Description: Boca Raton : Taylor & Francis Group, a CRC title, part of the Taylor & Francis imprint, a member of the Taylor & Francis Group, the Academic Division of T&F Informa, plc, [2017] | Includes bibliographical references and index. Identifiers: LCCN 2016014732 | ISBN 9781498731195 (acid-free paper) Subjects: LCSH: SolidWorks. | Computer-aided design. | Three-dimensional printing. Classification: LCC T386.S55 O59 2017 | DDC 620/.00420285--dc23 LC record available at https://lccn.loc.gov/2016014732 Visit the Taylor & Francis Web site at http://www.taylorandfrancis.com and the CRC Press Web site at http://www.crcpress.com This book is dedicated entirely to God who did solid work in the creation of everyone and everything in existence and in sustaining life. I owe Him all that I have because all that I have comes from Him. Contents Preface xxiii Acknowledgments xxv Author xxvii Section I Introductory Engineering Design Principles with SolidWorks 1 Introduction 3 SolidWorks within the Context of Additive Manufacturing Framework ....................................................3 SolidWorks within the Context of Computer-Aided Engineering Framework ..........................................4 3D Wireframes .................................................................................................................................................5 Constructive Solid Geometry ........................................................................................................................5 Boundary Representation Scheme ................................................................................................................5 Feature-Based Parametric Modeling ............................................................................................................6 Background of SolidWorks ..................................................................................................................................7 Starting a SolidWorks Session .............................................................................................................................7 SolidWorks User Interface ...................................................................................................................................7 Menu Bar Toolbar ............................................................................................................................................8 Menu Bar Menu ...............................................................................................................................................8 Task Pane ...........................................................................................................................................................8 CommandManager .......................................................................................................................................10 FeatureManager Design Tree .......................................................................................................................11 Heads-Up View Toolbar ...............................................................................................................................11 Drop-Down Menu .........................................................................................................................................12 Right-Click ......................................................................................................................................................12 Consolidated Toolbar ....................................................................................................................................12 System Feedback ............................................................................................................................................12 Setting the Document Options .........................................................................................................................12 System Options ...............................................................................................................................................12 Document Properties ....................................................................................................................................12 Modifying the Drafting Standard ..........................................................................................................13 Modifying the Dimension Arrows ........................................................................................................13 Modifying the Units Document Properties .........................................................................................13 vii File Management .................................................................................................................................................17 Caution Needed during SolidWorks Sessions ...........................................................................................17 Starting a New Document in SolidWorks .......................................................................................................17 My First Part ........................................................................................................................................................18 Useful SolidWorks Resources............................................................................................................................18 Compatibility of SolidWorks with Other Software .......................................................................................18 Summary ..............................................................................................................................................................25 2 Geometric Construction Tools 31 Introduction .........................................................................................................................................................31 Sketch Entities .....................................................................................................................................................32 Line ...................................................................................................................................................................32 Rectangle .........................................................................................................................................................33 Parallelogram .................................................................................................................................................33 Slot ....................................................................................................................................................................34 Polygon ............................................................................................................................................................34 Circle ................................................................................................................................................................35 Arc ....................................................................................................................................................................35 Ellipse ...............................................................................................................................................................36 Parabola ...........................................................................................................................................................36 Spline ...............................................................................................................................................................37 Sketch Tools .........................................................................................................................................................38 Fillet .................................................................................................................................................................38 Chamfer ...........................................................................................................................................................38 Offset ................................................................................................................................................................39 Convert Entities .............................................................................................................................................40 Trim .................................................................................................................................................................41 Extend ..............................................................................................................................................................41 Split Entities ....................................................................................................................................................42 Construction Geometry ................................................................................................................................42 Mirror ..............................................................................................................................................................42 Stretch Entities ...............................................................................................................................................43 Move Entities ..................................................................................................................................................43 Rotate Entities.................................................................................................................................................43 Scale Entities ...................................................................................................................................................44 Copy Entities ..................................................................................................................................................45 Pattern .............................................................................................................................................................46 Linear Pattern............................................................................................................................................46 Circular Pattern ........................................................................................................................................47 Summary ..............................................................................................................................................................47 3 Features 53 Introduction .........................................................................................................................................................53 Extruded Boss/Base ............................................................................................................................................54 Draft, Dome, Rib ............................................................................................................................................54 Draft ............................................................................................................................................................54 Dome ..........................................................................................................................................................56 Rib ...............................................................................................................................................................57 Extruded Cut ..................................................................................................................................................57 Revolved Boss/Base ........................................................................................................................................58 Creating Four Holes on the Revolved Part ...........................................................................................59 Revolved Cut ...................................................................................................................................................62 Lofted Boss/Base ............................................................................................................................................63 Lofted Cut .......................................................................................................................................................65 Swept Boss/Base .............................................................................................................................................67 Swept Cut.........................................................................................................................................................68 viii Contents Hole Wizard ....................................................................................................................................................68 Shell ..................................................................................................................................................................70 Fillet Tool ........................................................................................................................................................71 Defining a Constant Radius Fillet ..........................................................................................................71 Defining a Variable Radius Fillet ...........................................................................................................73 Defining a Face Fillet ...............................................................................................................................74 Defining a Full Round Fillet ...................................................................................................................75 Chamfer Tool ..................................................................................................................................................75 Defining a Chamfer Using an Angle and a Distance ..........................................................................76 Defining a Chamfer Using Two Distances ...........................................................................................76 Defining a Chamfer Using a Vertex .......................................................................................................77 Linear Pattern ......................................................................................................................................................77 Circular Pattern ...................................................................................................................................................78 Mirror ...................................................................................................................................................................79 Editing Features ..................................................................................................................................................80 Tutorials ................................................................................................................................................................82 Tutorial 3.1: Simple Part 1 .............................................................................................................................82 Tutorial 3.2: Simple Part 2 ............................................................................................................................83 Tutorial 3.3: Simple Part 3 ............................................................................................................................86 Tutorial 3.4: Simple Part 4 ............................................................................................................................87 Tutorial 3.5: Simple Part 5 ............................................................................................................................88 Tutorial 3.6: Simple Part 6 ............................................................................................................................89 Tutorial 3.7: Simple Part 7 .............................................................................................................................91 Tutorial 3.8: Simple Part 8 ............................................................................................................................92 Tutorial 3.9: Simple Part 9 ............................................................................................................................94 Tutorial 3.10: Simple Part 10.........................................................................................................................97 Patterns—Advanced Methods ..........................................................................................................................99 Sketch-Driven Pattern .................................................................................................................................100 Curve-Driven Pattern .................................................................................................................................100 Table-Driven Pattern ...................................................................................................................................107 Reference Planes ................................................................................................................................................108 Tutorial 3.1: Planes: Using Three Vertices ................................................................................................109 Tutorial 3.2: Planes: Angled Reference Plane ..........................................................................................109 Tutorial 3.3: Planes: Parallel Planes to Top Plane ...................................................................................109 Tutorial 3.4: Planes: Inclined Plane ...........................................................................................................111 Creating Patterns...............................................................................................................................................112 Types of Pattern............................................................................................................................................112 Creating the Revolved Boss/Base ..............................................................................................................112 Shelling ..........................................................................................................................................................113 Extruding a Thin Feature ...........................................................................................................................113 Creating a Slot ..............................................................................................................................................113 Creating the Linear Pattern ........................................................................................................................114 Creating a Circular Pattern of a Linear Pattern ......................................................................................115 Summary ............................................................................................................................................................118 4 Part Modeling—CSWA Preparations 123 Introduction .......................................................................................................................................................123 Tutorial 4.1a: Widget ...................................................................................................................................123 Tutorial 4.1b: Widget ...................................................................................................................................126 Tutorial 4.2 ....................................................................................................................................................127 Tutorial 4.3a ..................................................................................................................................................129 Tutorial 4.3b ..................................................................................................................................................134 Tutorial 4.4 ....................................................................................................................................................134 Tutorial 4.5a ..................................................................................................................................................134 Tutorial 4.5b ..................................................................................................................................................138 Tutorial 4.6a ..................................................................................................................................................138 Contents ix

See more

The list of books you might like

Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.