IIE Transactions 2006: Vol 38 Index

2006·3.4 MB·English

IE Transactions (2006) 38, 1133-1147
DESIGN & MANUFACTURING
AUTHOR INDEX FOR 2006
Akinc, U. and J. Meredith; Choosing the appropriate capacity for a Li, J. and D.E. Blumenfeld; Quantitative analysis of a transfer production
make-to-forecast production environment using a Markov analysis line with Andon; October; 837
approach; October; 847 Liu, Q., Y. Bukchin and R.D. Meller; Assembly system facility design:
January; 67
Blumenfeld, D.E. and J. Li; Quantitative analysis of a transfer production
line with Andon; October; 837 Meller, R.D., K.R. Gue and J.D. Skufca; The effects of pick density on
Bukchin, Y., R.D. Meller and Q. Liu; Assembly system facility design: order picking areas with narrow aisles; October; 859
January; 67 Meller, R.D., Y. Bukchin and Q. Liu; Assembly system facility design:
January: 67
Chen, R.-S., R.-C. Wu and S.S. Chian; Design of a product quality control Meredith, J. and U. Akine; Choosing the appropriate capacity for a make-
system based on the use of data mining techniques; January; 39 to-forecast production environment using a Markov analysis approach;
Chen, Y., Y. Cui and J. Wu; Selecting the best sheet length for the steel October; 847
stock used in circular blank production; October; 829 Moskowitz, H., H. Tarakci, K. Tang and R. Plante; Maintenance out-
Chian, S.S., R.-C. Wu and R.-S. Chen: Design of a product quality control sourcing of a multi-process manufacturing system with multiple con-
system based on the use of data mining techniques; January; 39 tractors; January; 81
Cui, Y., Y. Chen and J. Wu: Selecting the best sheet length for the steel Nelkenbaum, B.D. and D. Sinreich; Determining production sequences for
stock used in circular blank production, October; 829 single-stage multifunctional machining systems based on the tradeoff
hetween fixture cost, re-fixturing and tool replenishment, October; 813
Dolgui, A., B. Finel, N.N. Guschinsky, G.M. Levin and F.B. Vernadat;
MIP approach to balancing transfer lines with blocks of parallel Plante, R., H. Tarakci, K. Tang and H. Moskowitz; Maintenance
operations, October; 869 outsourcing of a multi-process manufacturing system with multiple
contractors, January; 81
Finel, B., A. Dolgui, N.N. Guschinsky, G.M. Levin and F.B. Vernadat;
MIP approach to balancing transfer lines with blocks of parallel Roodbergen, K.J. and I.F.A. Vis; A model for warehouse layout; October;
operations; October; 869 799
Gue, K.R., R.D. Meller and J.D. Skufca: The effects of pick density on Seifert, R.W., K. Jiang and H.L. Lee; Satisfying customer preferences via
order picking areas with narrow aisles; October; 859 mass customization and mass production; January; 25
Gue, K.R.; Very high density storage systems; January; 93 Sinreich, D. and B.D. Nelkenbaum; Determining production sequences for
Guschinsky, N.N., A. Dolgui, B. Finel, G.M. Levin and F.B. Vernadat: single-stage multifunctional machining systems based on the tradeoff
MIP approach to balancing transfer lines with blocks of parallel between fixture cost, re-fixturing and tool replenishment; October; 813
operations, October; 869 Skufca, J.D., K.R. Gue and R.D. Meller; The effects of pick density on
order picking areas with narrow aisles; October; 859
Hillier, F.S. and MLS. Hillier; Simultaneous optimization of work and buffer Sodhi, M.S. and B.F. Lamond; Minimizing the expected processing time
space in unpaced production lines with random processing times; Jan- on a flexible machine with random tool lives; January; |
uary; 53
Hillier, M.S. and FS. Hillier; Simultaneous optimization of work and Tang, K., H. Tarakci, H. Moskowitz and R. Plante; Maintenance out-
buffer space in unpaced production lines with random processing sourcing of a multi-process manufacturing system with multiple con-
times; January; 53 tractors; January; 81
Tarakci, H., K. Tang, H. Moskowitz and R. Plante; Maintenance
Jack Feng, C.-X., Z.-G. (Samuel) Yu and A. Kusiak: Selection and val- outsourcing of a multi-process manufacturing system with multiple
idation of predictive regression and neural network models based on contractors; January; 81
designed experiments; January; 13
Jiang, K., H.L. Lee and R.W. Seifert; Satisfying customer preferences via Vernadat, F.B., A. Dolgui, B. Finel, N.N. Guschinsky, and G.M. Levin;
mass customization and mass production; January; 25 MIP approach to balancing transfer lines with blocks of parallel op-
erations; October; 869
Kusiak, A., C.-X. Jack Feng and Z.-G. (Samuel) Yu: Selection and Vis, 1.F.A. and K.J. Roodbergen; A model for warehouse layout; October;
validation of predictive regression and neural network models based 799
on designed experiments; January; 13
Wu, J. Y. Cui and Y. Chen; Selecting the best sheet length for the steel
Lamond, B.F. and M.S. Sodhi; Minimizing the expected processing time stock used in circular blank production; October; 829
on a flexible machine with random tool lives; January; | Wu, R.-C., R.-S. Chen and S.S. Chian; Design of a product quality control
Lee, H.L., K. Jiang and R.W. Seifert; Satisfying customer preferences via system based on the use of data mining techniques; January; 39
mass customization and mass production; January; 25
Levin, G.M., Dolgui, A., B. Finel, N.N. Guschinsky and F.B. Vernadat; Yu (Samuel), Z.-G., C.-X. Jack Feng and A. Kusiak; Selection and val-
MIP approach to balancing transfer lines with blocks of parallel op- idation of predictive regression and neural network models based on
erations; October; 869 designed experiments; January; 13
0740-817X © 2006 “ITE”
Indices
SUBJECT INDEX FOR 2006
400 — Auto industry 1410 — Analysis methods
Bukchin, Y.. R.D. Meller and Q. Yu: Assembly system facility design: Gue, K.R., R.D. Meller and J.D. Skifca; The effects of pick density on
January: 67 order picking areas with narrow aisles; October; 859
500 — Manufacturing 1430 — Equipment: storage
Bukchin, Y.. R.D. Meller and Q. Yu: Assembly system facility design: Gue, K.R.; Very high density storage systems: January: 93
January: 67
1440 — Facilities
1040 — Design optimization Bukchin, Y., R.D. Meller and Q. Yu; Assembly system facility design;
Roodbergen, K.J. and 1.F.A. Vis: A model for warehouse layout; October; January; 67
799 Gue, K.R., R.D. Meller and J.D. Skifea: The effects of pick density on
1110 — Machine tools order picking areas with narrow aisles; October; 859
Roodbergen, K.J. and I.F.A. Vis: A model for warehouse layout; October:
Lamond, B.F. and M.S. Sodhi: Minimizing the expected processing time
799
on a flexible machine with random tool lives; January; |
1200 — Manufacturing processes .
Cui, Y., Y. Chen and J. Wu; Selecting the best sheet length for the steel 1450 — Material handling functions
stock used in circular blank production, October, 829 Roodbergen, K.J. and 1.F.A. Vis: A model for warehouse layout; October;
Hillier, M.S. and F.S. Hillier; Simultaneous optimization of work and 799
buffer space in unpaced production lines with random processing
times; January; 53 2000 — Applied optimization
Tarakci, H.. K. Tang, H. Moskowitz and R. Plante: Maintenance Cui, Y.. Y. Chen and J. Wu: Selecting the best sheet length for the steel
outsourcing of a multi-process manufacturing sysieni with multiple stock used in circular blank production, October; 829
contractors, January; 81
2010 — Combinatorial optimization
1240 — Material forming Bukchin, Y., R.D. Meller and Q. Yu: Assembly system facility design:
Cui, Y.. Y. Chen and J. Wu: Selecting the best sheet length for the steel January; 67
stock used in circular blank production, October, 829 Cui, Y., Y. Chen and J. Wu: Selecting the best sheet length for the steel
stock used in circular blank production; October; 829
1280 — Process optimization
Cui, Y., Y. Chen and J. Wu; Selecting the best sheet length for the steel 2100 — Applied probability
stock used in circular blank production, October; 829 Akinc, U. and J. Meredith; Choosing the appropriate capacity for a
Hillier, M.S. and F-.S. Hillier: Simultaneous optimization of work and make-to-forecast production environment using a Markov analysis
buffer space in unpaced production lines with random processing approach, October; 847
times; January; 53
2180 — Markov chains
1320 — Flexible manufacturing systems Akine, U. and J. Meredith; Choosing the appropriate capacity for a
Lamond, B.F. and M.S. Sodhi; Minimizing the expected processing time make-to-forecast production environment using a Markov analysis
on a flexible machine with random tool lives; January; | approach, October; 847
Sinreich, D. and B.D. Nelkenbaum; Determining production sequences for
single-stage multifunctional machining systems based on the tradeoff 2260 — Neural networks
between fixture cost, re-fixturing and tool replenishment; October; Jack Feng, C.X., Z.-G. (Samuel) Yu and A. Kusiak: Selection and
813 validation of predictive regression and neural network models based
on designed experiments; January; 13
1330 — Manufacturing systems analysis
Dolgui, A., B. Finel, N.N. Guschinsky, G.M. Levin and F.B. Vernadat: 3300 — Production control
MIP approach to balancing transfer lines with blocks of parallel Sinreich, D. and B.D. Nelkenbaum: Determining production sequences for
operations, October; 869 single-stage multifunctional machining systems based on the tradeoff
between fixture cost, re-fixturing and tool replenishment; October: 813
1360 — Manufacturing systems design
Bukchin, Y., R.D. Meller and Q. Yu; Assembly sysiem facility design: 3410 — Capacity planning
January; 67 Akine, U. and J. Meredith; Choosing the appropriate capacity for a
Li, J. and D.E. Blumenfeld; Quantitative analysis of a transfer production make-to-forecast production environment using a Markov analysis
line with Andon; October: 837 approach, October: 847
1370 — Manufacturing systems modeling 3650 — Demand management
Sinreich, D. and B.D. Nelkenbaum: Determining production sequences for Jiang, K., H.L. Lee and R.W. Seifert; Satisfying customer preferences via
single-stage multifunctional machining systems based on the tradeoff mass customization and mass production; January; 25
between fixture cost, re-fixturing and tool replenishment, October:
813 4120 — Design of experiments
Jack Feng, C.X., Z.-G. (Samuel) Yu and A. Kusiak; Selection and
1400 — Material handling validation of predictive regression and neural network models based
Gue, K.R.; Very high density storage systems; January: 93 on designed experiments; January; 13
Indices 1135
4400 — Reliability engineering 4460 — Maintenance
Tarakci, H., K. Tang, H. Moskowitz and R. Plante; Maintenance out- Tarakci, H., K. Tang, H. Moskowitz and R. Plante; Maintenance out-
sourcing of a multi-process manufacturing system with multiple con- sourcing of am ulti-process manufacturing system with multiple con-
tractors; January; 81 tractors; January; 81
GUEST REVIEWERS FOR 2006
Dr. Ronald G. Askin, University of Arizona Joel Nachlas, Virginia Polytechnic Institute and State University
Rajan Batta, University at Buffalo (SUNY) P.R. Parthasarathy, Indian Institute of Technology - Madras
Ratna Babu Chinnam, Wayne State University Pratikh J. Parikh, Virginia Polytechnic Institute and State University
Joseph Bukchin, Tel Aviv University Patrick Patterson, Texas Tech University
Sergiy Butenko, Texas A&M University Brett Peters, Texas A&M University
Stephen Powell, Dartmouth College
Franco Caron, Politecnico di Milano
Ram Rachamadugu, University of Toledo
Tapas Das, University of South Florida Saibal Ray, McGill University
Kai Furmans, Institute for Material Handling & Logistic Systems Baris Tan, Koc University
Manoj Tiwari, National Institute of Foundry and Forge Technology,
Stanley Gershwin, Massachusetts Institute of Technology Ranchi, India
Thom Hodgson, North Carolina State University Halit Uster, Texas A&M University
Kai Jiang, Massachusetts Institute of Technology George Vairaktarakis, Case Western Reserve University
Ajay Joneja, Hong Kong University of Science & Technology
M.A. Wortman, Texas A&M University
Selcuk Karabati, Koc University
Rene de Koster, Erasmus University, Rotterdam School of Management Jian Yang, New Jersey Institute of Technology
Ananth Krishnamurthy, Rensselaer Polytechnic Institute Jui-Pin Yang, Industrial Technology Research Institute
Soundar Kumara, The Pennsylvania State University
Chen Zhou, Georgia Institute of Technology
Mark Lewis, Cornell University Nico Vandaele, University of Antwerp & Catholic University of
George Liberopoulos, University of Thessaly Leuven
Indices
SCHEDULING & LOGISTICS
AUTHOR INDEX FOR 2006
Aparisi, F., G. Avendafio and J. Sanz; Techniques to interpret T? control Kapur, K.C. and Q. Feng; Economic development of specifications for
chart signals; August; 647 100% inspection based on asymmetric quality lossfunctions, August;
Avendano, G., F. Aparisi and J. Sanz; Techniques to interpret T? control 659
chart signals; August; 647 Ketzenberg, M., R. Metters and J. Semple: A heuristic for multi-item
production with seasonal demand; March; 201
Berk, E. and A.O. Toy; Dynamic lot sizing problem for a warm/cold pro- King, R.E., P.M. Stanfield and T.J. Hodgson; Determining sequence and
cess, November; 1027 ready times in a remanufacturing system; July; 565
Berman, O. and Z. Drezner; Location of congested capacitated facilities Krass, D., O. Berman and J. Wang: Locating service facilities to reduce
with distance-sensitive demand; March; 213 lost demand; November; 933
Berman, O., D. Krass and J. Wang: Locating service facilities to reduce
lost demand; November; 933 Lau, A.H.L., H.-S. Lau and Y.-W. Zhou: Considering asymmetrical manu-
Bhootra, A., S.C. Sarin and H.D. Sherali; A precedence-constraianseydm - facturing cost information in a two-echelon system that uses price-only
metric traveling salesman model for disassembly optimization; March; contracts; March; 253
993 Lau, H.-S.. A.H.L. Lau and Y.-W. Zhou: Considering asymmetrical manu-
Bollapragada, R. and U.S. Rao: Replenishment planning in discrete-time, facturing cost information in a two-echelon system that uses price-only
capacitated, non- stationary, stochastic inventory systems; July; 605 contracts, March; 253
Lau, Y.L., E.K.P. Chew and L.H. Lee; Component commonality in
Briskorn, D.; A note on capacitateldo t sizing with setup carry over, Novem- assembled-to-stock systems, March; 239
ber: 1045 Lee, L.H., E.K.P. Chew and Y.L. Lau; Component commonality in
Cahskan, C. and R.W. Hall; A static empty equipment allocation model assembled-to-stock systems; March; 239
for long-haul networks with constrained crew routes, November, 947 Lei, L., S. Liu, A. Ruszezynski and S. Park; On the integrated production,
Chang, C.-W., W.L. Pearn, P.C. Lin, and Y.C. Wu; Quality yield measure inventory, and distribution routing problem: November: 955
for processes with asymmetric tolerances; August, 619 Lin, P.C., W.L. Pearn, Y.C. Chang and C.-W. Wu; Quality vield measure
Chew, E.K.P.. L.H. Lee and Y.L. Lau; Component commonality in for processes with asymmetric tolerances, August; 619
assembled-to-stock systems; March; 239 Liu, S., L. Lei, A. Ruszezynski and S. Park; On the integrated pro-
Cho, R.K., Y. Gerchak and S. Ray: Coordination of quantity and duction, inventory, and distribution routing problem; November:
shelf-retention timing in the video movie rental industry; July; 525 955
Logendran, R. and P. Parthanadee; Periodic product distribution from
Daskin, M.S. and L.V. Snyder: Stochastic p-robust location problems: multi-depots under limited supplies; November: 1009
November; 971 Lucas, J.M., D.J. Davis and E.M. Saniga: Detecting improvement using
Davis, D.J., J.M. Lucas and E.M. Saniga; Detecting improvement using Shewhart attribute control charts when the lower control limitis zero:
Shewhart attribute control charts when the lower control limitis zero; August; 699
August; 699
del Castillo, E. and R. Rajagopal: A Bayesian method for robust tolerance Metters, R.. M. Ketzenberg and J. Semple: A heuristic for multi-item
control and parameter design, August; 685 production with seasonal demand, March; 201
Dobson, G. and E.J. Pinker: The value of sharing lead time information: Moskowitz, H., H. Tarakci, K. Tang and R. Plante; /ncentive maintenance
March; 171 outsourcing contracts for channel coordination and improvement:
Drezner, Z. and O. Berman: Location of congested capacitated facilities August; 671
with distance-sensitive demand, March; 213 Muriel, A. and R. Ruiz-Benitez: Optimal implementation and benefits of
rolling inventory; July; 591
Feng, Q. and K.C. Kapur; Economic development of specifications for
100% inspection based on asymmetric quality lossfunctions; August: Netessine, S., N. Rudi and Y. Wang; /nventory competition and incentives
659 to back-order, November; 883
Gerchak, Y., R.K. Cho and S. Ray; Coordination of quantity and shelf- Park, S., L. Lei, S. Liu and A. Ruszezynski; On the integrated pro-
retention timing in the video movie rental industry; July: 525 duction, inventory, and distribution routing problem; November:
Gilbert, S.M., Y. Xia and G. Yu; Strategic outsourcing for competing 955
OEMs that face cost reduction opportunities; November; 903 Parthanadee, P. and R. Logendran; Periodic product distribution from
Hall, R.W. and C. Caligkan; A static empty equipment allocation model multi-depots under limited supplies; November; 1009
for long-haul networks with constrained crew routes: November: Pearn, W.L., P.-C. Lin, Y.C. Chang and C.-W. Wu; Quality vield measure
947 for processes with asymmetric tolerances; August: 619
Pinker, E.J. and G. Dobson: The value of sharing lead time information:
Herer, Y.T., M. Tzur and E. Yiicesan; The multilocation transshipment March: 171
problem, March; 185 Plante, R., H. Tarakci, K. Tang and H. Moskowitz; Incentive maintenance
Hodgson, T.J., P.M. Stanfield and R.E. King: Determining sequence and outsourcing contracts for channel coordination and improvement;
ready times in a remanufacturing system; July; 565 August; 671
Smilowitz, K.; Multi-resource routing with flexible tasks: an application in Qi. X.; A logistics scheduling model: scheduling and transshipmenfto r two
drayage operations, July; 577 processing centers; July; 537
Indices 1137
Rajagopal, R. and E. del Castillo; A Bayesian method for robust tolerance Tang, K., H. Tarakci, H. Moskowitz and R. Plante; /ncentive maintenance
control and parameter design; August; 685 outsourcing contracts for channel coordination and improvement;
Rao, U.S. and R. Bollapragada; Replenishment planning in discrete-time, August; 671
capacitated, non- stationary, stochastic inventory systems; July; 605 Tarakci, H., K. Tang, H. Moskowitz and R. Plante; Jncentive maintenance
Ray, S., Y. Gerchak and R.K. Cho; Coordination of quantity and shelf- outsourcing contracts for channel coordination and improvement;
retention timing in the video movie rental industry; July; 525 August; 671
Rudi, N., S. Netessine and Y. Wang; /nventory competition and incentives Testik, M.C. and G.C. Runger; Multivariate one-sided control charts:
to back-order; November; 883 August; 635
Ruiz-Benitez, R. and A. Muriel; Optimal implementation and benefits of Thonemann, U.W., R.W. Seifert and M.A. Sieke; Relaxing channel sepa-
rolling inventory; July; 591 ration: Integrating a virtual store into the supply chain via transship-
Runger, G.C. and M.C. Testik; Multivariate one-sided control charts; ments, November; 917
August; 635 Toy, A.O. and E. Berk; Dynamic lot sizing problem for a warm/cold pro-
Ruszezynski, A., L. Lei, S. Liu and S. Park; On the integrated production, cess; November; 1027
inventory, and distribution routing problem; November; 955 Tzur, M., Y.T. Herer and E. Yiicesan; The multilocation transshipment
problem; March; 185
Saniga, E.M., J.M. Lucas and D.J. Davis; Detecting improvement using
Shewhart attribute control charts when the lower control limitis zero: Wang, J., O. Berman and D. Krass; Locating service facilities to reduce
August; 699 lost demand; November; 933
Sanz, J., F. Aparisi and G. Avendaiio; Techniques to interpret T? control Wang, Y., S. Netessine and N. Rudi; Jnventory competition and incentives
chart signals; August; 647 to back-order, November; 883
Sarin, S.C., H.D. Sherali and A. Bhootra; A precedence-constrained asym- Wilhelm, W.E. and X. Zhu; Scheduling and lot sizing with sequence-
metric traveling salesman model for disassembly optimization; March; dependent setup: A literature review; November; 987
223 Wu, C.-W., W.L. Pearn, P.C. Lin, and Y.C. Chang; Quality yield measure
Seifert, R.W., U.W. Thonemann and M.A. Sieke; Relaxing channel sepa- for processes with asymmetric tolerances; August; 619
ration: Integrating a virtual store into the supply chain via transship-
ments; November; 917 Xia, Y., S.M. Gilbert and G. Yu; Strategic outsourcing for competing
Semple, J.. M. Ketzenberg and R. Mettehrs: A heuristifco r multi-item OEMs that face cost reduction opportunities, November; 903
production with seasonal demand; March; 201
Sherali, H.D., S.C. Sarin and A. Bhootra: A precedence-constrained asym- Yu, G., S.M. Gilbert and Y. Xia; Strategic outsourcing for competing
metric traveling salesman model for disassembly optimization; March; OEMs that face cost reduction opportunities; November; 903
993 Yiicesan, E., Y.T. Herer and M. Tzur; The multilocation transshipment
Sieke, M.A., R.W. Seifert and U.W. Thonemann; Relaxing channel sepa- problem; March; 185
ration: Integrating a virtual store into the supply chain via transship-
ments, November; 917 Zhou, Y.-W., A.H.L. Lau and H.-S. Lau; Considering asymmetrical
Snyder L.V.; Facility location under uncertainty: a review; July; 547 manufacturing cost information in a two-echelon system that uses
Snyder, L.V. and M.S. Daskin; Stochastic p-robust location problems; price-only contracts; March; 253
November; 971
Stanfield, P-M., R.E. King and T.J. Hodgson; Determining sequence and Zhu, X. and W.E. Wilhelm: Scheduling and lot sizing with sequence-
ready times in a remanufacturing system; July; 565 dependent setup: A literature review; November; 987
SUBJECT INDEX FOR 2006
130 — Entertainment services 1210 — Assembly
Gerchak, Y., R.K. Cho and S. Ray; Coordination of quantity and Sarin, S.C., H.D. Sherali and A. Bhootra; A precedence constrained
shelf-retention timing in the video movie rental industry; July; 525 asymmetric traveling salesman model for disassembly optimization;
March; 223
150 — Retail services
Netessine, S., N. Rudi and Y. Wang; /nventory competition and incentives
1500 — Process planning
to back-order, November; 883
Sarin, S.C., H.D. Sherali and A. Bhootra; A precedence constrained
Seifert, R.W., U.W. Thonemann and M.A. Sieke: Relaxing channel
asymmetric traveling salesman model for disassembly optimization;
separation: integrating a virtual store into the supply chain via
March; 223
transshipments; November; 917
430 — Process industries 3010 — Control policy
Toy, A.O. and E. Berk; Dynamic lot sizing problem for a warm/cold Bollapragada, R. and U.S. Rao; Replenishment planning in discrete-time,
process; November; 1027 capacitated, non-stationary, stochastic inventory systems; July;
605
650 — Internet Herer, Y.T., M. Tzur and E. Yiicesan; The multi-location transshipment
Seifert, R.W., U.W. Thonemann and M.A. Sieke: Relaxing channel sepa- problem, March; 185
ration: integrating a virtual store into the supply chain via transship- Netessine, S., N. Rudi and Y. Wang: /nventory competition and incentives
ments; November; 917 to hack-order, November; 883
1138 Indices
3020 — Coordination Snyder, L.V.; Facility location under uncertainty: a_ review; July;
Gerchak, Y.. R.K. Cho and S. Ray; Coordination of quantity and 547
shelf-retention timing in the video movie rental industry: July:
525 3250 — Transportation
Gilbert, S.M., Y. Xia and G. Yu; Strategic outsourcing for competing Calhigkan, C. and R.W. Hall: A Static empty equipment allocation model
OEMs that face cost reduction opportunities; November; 903 for long-haul networks with constrained crew routes; November; 947
Lau, A.H.L., H.-S. Lau and Y.-W. Zhou; Considering asymmetrical
manufacturing cost information in a two-echelon system that uses 3255 — Vehicle routing/scheduling
price-only contracts, March; 253 Caligkan, C. and R.W. Hall; A Static empty equipment allocation model
Seifert, R.W.. U.W. Thonemann and M.A. Siecke: Relaxing channel for long-haul networks with constrained crew routes; November:
separation: integrating a virtual store into the supply chain via 947
transshipments; November; 917 Lei, L., S. Liu, A. Ruszezynski and S. Park; On the integrated production,
inventory, and distribution routing problem, November, 955
3040 — Material management Muriel, A. and R. Ruiz-Benitez; Optimal implementation and benefits of
Muriel, A. and R. Ruiz-Benitez; Optimal implementation and benefits of rolling inventory: July; 591
rolling inventory; July: 591 Parthanadee, P. and R. Logendran: Periodic product distribution from
Parthanadee, P. and R. Logendran; Periodic product distribution from multi-depots under limited supplies; November; 1009
multi-depots under limited supplies: November; 1009 Smilowitz, K.; Multi-resource routing with flexible tasks: an application
in drayage operations; July; 577
3050 — Multi-stage systems
Chew, E.K.P., L.H. Lee and Y.L. Lau; Component commonality in 3320 — Kitting
assembled-to-stock systems; March: 239 Chew, E.K.P., L.H. Lee and Y.L. Lau; Component commonality in
assembled-to-stock systems; March; 239
3070 — Random yield
Bollapragada, R. and U.S. Rao: Replenishment planning in discrete-time, 3410 — Capacity planning
capacitated, non-stationary, stochastic inventory systems; July; 605 Ketzenberg, M., R. Metters and J. Semple; A heuristic for multi-item
production with seasonal demand: March; 201
3100 — Inter-disciplinary and cross-functional studies 3440 — Information management
Herer, Y.T., M. Tzur and E. Yiicesan:; The multi-location transshipment
Dobson, G. and E.J. Pinker: The Value of sharing lead-time information:
problem; March; 185
March; 171
3140 — Marketing /manufacturing interface 3450 — Inventory management
Lau, A.H.L., H.-S, Lau and Y.-W. Zhou:; Considering asymmetrical Bollapragada, R. and U.S. Rao; Replenishment planning in discrete-time,
manufacturing cost information in a two-echelon system that uses capacitated, non-stationary, stochastic inventory systems; July; 605
price-only contracts; March; 253 Ketzenberg, M., R. Metters and J. Semple; A heuristic for multi-item
Netessine, S., N. Rudi and Y. Wang; /nventory competition and incentives production with seasonal demand; March; 201
to back-order, November; 883
3460 — Lead time management
3150 — Supply chain management
Dobson, G. and E.J. Pinker: The Value of sharing lead-time information:
Gilbert, S.M., Y. Xia and G. Yu; Strategic outsourcing for competing March; 171
OEMs that face cost reduction opportunities; November; 903
Seifert, R.W., U.W. Thonemann and M.A. Sieke: Relaxing channel 3470 — Lot sizing
separation: integrating a virtual store inio the supply chain via Briskorn, D.; A note on capacitated lot sizing with setup carry-over:
transshipments, November; 917 November; 1045
Toy, A.O. and E. Berk; Dynamic lot sizing problem for a warm/cold
3170 — Integrated production/distribution process; November; 1027
Lei, L., S. Liu, A. Ruszezynski and S. Park; On the integrated production,
inventory, and distribution routing problem, November; 955 3510 — Due date quotation
Qi, X.; A logistics scheduling model: scheduling and transshipment for two
Dobson, G. and E.J. Pinker: The Value of sharing lead-time information:
processing centers; July: 537 March: 171
3210 — Distribution planning 3530 — Production scheduling
Lei, L., S. Liu, A. Ruszezynski and S. Park; On the integrated production, Briskorn, D.; A note on capacitated lot sizing with setup carry-over:
inventory, and distribution routing problem, November; 955 November; 1045
Parthanadee, P. and R. Logendran; Periodic product distribution from Qi, X.; A logistics scheduling model: scheduling and transshipment for two
multi-depots under limited supplies; November; 1009 processing centers; July; 537
Toy. A.O. and E. Berk: Dynamic lot sizing problem for a warm/cold
3215 — Facility location process; November; 1027
Berman, O., D. Krass and J. Wang; Locating service facilities to reduce Zhu, X. and W.E. Wilhelm; Scheduling and lot sizing with sequence-
lost demand, November; 933 dependent setup: a literature review; November; 987
Berman, O. and Z. Drezner; Location of congested capacitated facilities
with distance sensitive demand: March; 213 3580 — Stochastic scheduling
Snyder, L.V. and M.S. Daskin: Stochastic p-robust location problems: Stanfield, P.M., R.E. King and T.J. Hodgson; Determining sequence and
November; 971 ready times in a remanufacturing system: July; 565
Indices 1139
3590 — Work release and loading 4326 — Inspection
Stanfield, P.M., R.E. King and T.J. Hodgson; Determining sequence and Feng, Q. and K.C. Kapur; Economic development of specifications for
ready times in a remanufacturing system: July; 565 100% inspection based on asymmetric quality loss functions; August:
659
3595 — Workforce scheduling
Caligkan, C. and R.W. Hall; A Static empty equipment allocation model 4340 — Statistical quality control
for long-haul networks with constrained crew routes; November: Aparisi, F., G. Avendaniio and J. Sanz; Techniques to interpret T° control
947 chart signals; August; 647
Lucas, J.M., D.J. Davis and E.M. Saniga; Detecting improvement using
3650 — Demand management Shewhart attribute control charts when the lower control limit is zero;
Netessine, S., N. Rudi and Y. Wang; /nventory competition and incentives August; 699
to hack-order; November; 883 Pearn, W.L., P-C. Lin, Y.C. Chang and C.-W. Wu; Quality yield measure
for processes with asymmetric tolerances; August: 619
4140 — Optimization applications Testik, M.C. and G.C. Runger; Multivariate one-sided control charts;
Rajagopal, R. and E. del Castillo; A Bayesian method for robust tolerance August; 635
control and parameter design, August; 685
4460 — Maintenance
4180 — Robust design Tarakci, H., K. Tang, H. Moskowitz and R. Plante; /ncentive maintenance
Rajagopal, R. and E. del Castillo; A Bayesian method for robust tolerance outsourcing contracts for channel coordination and improvement:
control and parameter design; August; 685 August; 671
REFEREES JULY 2005-AUGUST 2006
Allesandro Agnetis, Universita di Siena, Italy Abhijit Gosavi, State University of New York at Buffalo
Hyun-soo Ahn, University of Michigan Stephen Graves, Massachusetts Institute of Technology
Kerem Akartunali, University of Wisconsin - Madison Shanhong Gu, Derivative Research, JP Morgan Chase
Osman Alp, Bilkent University Kevin Gue, Auburn University
Goker Aydin, University of Michigan Refik Gullu, Bogazici University, Turkey
Tolga Aydinliyim, Case Western Reserve University Harish Gurnani, University of Miami
Murat Bayiz, University of Southern California Jian-Qiang Hu, Boston University
Oded Berman, University of Toronto Simin Huang, Tsinghua University, Beijing, China
Fernando Bernstein, Duke University Zhimin Huang, Adelphi University
Jean-Charles Billaut, Universite de Tours, France Woonghee Tim Huh, Columbia University
Tamer Boyaci, McGill University, Canada Armann Ingolfsson, University of Alberta
Apostolos Burnetas, The University of Athens Adam Janiak, Wroclaw University of Technology, Poland
Ann Campbell, University of lowa Ahmad Jarrah, University of Wyoming
Emilio Carrizosa, University of Seville Wikron Jaruphongsa, National University of Singapore
Rachel Chen, UC Riverside Tamminh Kapuscinska, SherTrack LLC, Michigan
Youhua Frank Chen, Chinese University of Hong Kong Bahar Kara, Bilkent University
Xin Chen, University of Illinois Fikri Karaesmen, Koc University
Zhi-Long Chen, University of Maryland Kathrin Klamroth, University of Nuremberg, Nuremberg, Germany
Mabel Chou, National University of Singapore Andreas Klose, University of Zurich, Switzerland
William Cooper, University of Minnesota Gurhan Kok, Duke University
Milind Dawande, University of Texas at Dallas Harish Krishnan, University of British Columbia
Meltem Denizel, Sabanci University, Turkey Susan Kulp, Harvard Business School
Qing Ding, Singapore Management University Erhan Kutanoglu, University of Texas at Austin
Greg Dobson, University of Rochester Shine-Der Lee, National Cheng Kung University, Taiwan
Mustafa Dogru, Technical University of Eindhoven, The Netherlands Chung-Lun Li, Hong Kong University of Science and Technology
Lingxiu Dong, Washington University in St. Louis Weidong Lin, Singapore Institute of Manufacturing Technology
Karen Donohue, University of Minnesota Shuguang Liu, SUNY at New Paltz, NY
Fred Easton. Syracuse University Scott Mason, University of Arkansas, Fayetteville
Mohsen Elhafsi, University of California - Riverside Mozart Menezes, HEC Paris
Nesim Erkip, Bilkent University Elise Miller-Hooks, University of Maryland
Murat Erkoc, The University of Miami Joseph Milner, University of Toronto
Kadir Ertogral, King Fahd University of Petroleum and Minerals, Barry Mishra, University of California—Riverside
Saudi Arabia Linda Moonen, Katholieke Universiteit Leuven, Netherlands
Mark Ferguson, Georgia Institute of Technology David Morton, University of Texas at Austin
Katia Frank, Delta Technology Charles Munson, Washington State University, Pullman
Michael Fry, University of Cincinnati Kumar Muthuraman, Purdue University
Xianghua Gan, Hong Kong Polytechnic University Hari Natarajan, University of Miami
Amit Garg, Case Western Reserve University Serguei Netessine. University of Pennsylvania
Srinagesh Gavirneni, Cornell University Chi To Daniel Ng, Hong Kong Polytechnic University
Bernard Gendron, University of Montreal Ceyda Oguz, Koc University, Turkey
Yigal Gerchak, Tel Aviv University Suleyman Ozekici, Koc University, Turkey
Joe Geunes, University of Florida Dolores Romero-Morales, Oxford University, UK
1140 Indices
Jennifer Ryan, University College Dublin, Ireland Baris. Tan, Koc University, Turkey
David Parkes, Harvard University Tarkan Tan, Technische Universiteit Eindhoven, The Netherlands
Edieal Pinker, University of Rochester Mehmet Taner, Bilkent University, Turkey
Guruprasad Pundoor, Federal Express, Memphis, TN Giri Tayi, State University of New York at Albany
Yaron Raviv, Claremont McKenna College Beril Toktay, Georgia Institute of Technology
Saibal Ray, McGill University Brian Tomlin, University of North Carolina
Edwin Romeijn, University of Florida, Gainesville Halit Uster, Texas A&M University
Avijit Sarkar, University of Redlands Tom van Woensel, Technical University of Eindhoven, The Netherlands
Sridhar Seshadri, New York University Ton Volgenant, University of Amsterdam, The Netherlands
Suresh Sethi, University of Texas at Dallas Albert Wagelmans, Erasmus University, The Netherlands
Natalia Shakhlevich, University of Leeds, UK Charles Wang, University at Buffalo
Zuo-Jun Max Shen, University of California, Berkeley Qian Wang, Chinese Academy ofS ciences, Beijing, China
Geir Hasle, SINTEF, Norway Qinan Wang, Nanyang Technological University
Cole Smith, University of Florida, Gainsville Yunzeng Wang, University of Texas at Dallas
Rick So, University of California, Irvine Xiaowei Xu, Rutgers University
Svenja Sommer, Purdue University Muge Yayla, University of North Carolina at Chape! Hill
Gilvan Souza, University of Maryland Xiaohong Yue, University of Wisconsin- Milwaukee
Lawrence Snyder, Lehigh University Shuya Yin, University of California—Irvine
Richard Steinberg, University of Cambridge Jun Zhang, University of Texas at Dallas
Andrew Starbird, Santa Clara University Rache! Zhang, Hong Kong University of Science and Technology
Joseph Szmerekovsky, North Dakota State University Wen Zhao, United Airlines
Peng Sun, Duke University Kaijie Zhu, Hong Kong University of Science and Technology
Kevin Taafe, Clemson University Eda Kemahlioglu Ziya, University of North Carolina
Indices
OPERATIONS ENGINEERING
AUTHOR INDEX FOR 2006
Barto, Andrew G., Jennie Si, Warren Buckler Powell and Don Wunsch Iskander, W.H. and S.T.A. Niaki; A principal-components approach to
(Eds.); Handbook of Learning and Approximate Dynamic Program- assign confidence intervals in steady-state simulation; February; 103
ming; February: 169
Wunsch, Don, Jennie Si, Andrew G. and Warren Buckler Powell (Eds.): Jin, N. and S. Zhou; Signature construction and matchfiorn fgaul t diagno-
Handbook of Learning and Approximate Dynamic Programming: sis in manufacturing processes through fault space analysis; April; 341
February; 169
Si, Jennie, Andrew G., Warren Buckler Powell and Don Wunsch (Eds.): Kim, S.-H. and D. Batur; Fully sequential selection procedures with a
Handbook of Learning and Approximate Dynamic Programming: parabolic boundary; September; 749
February; 169 Kotz, S. and J.R. van Dorp; A novel method for fitting unimodal continuous
Powell, Warren Buckler, Jennie Si, Andrew G. and Don Wunsch (Eds.): distributions on a bounded domain utilizing expert judgment estimates;
Handbook of Learning and Approximate Dynamic Programming: May: 421
February; 169 Kulkarni, S., A. Marar and W.B. Powell; Combining cost-based and rule-
Barton, R.R., V.C.P. Chen, K.-L. Tsui and M. Meckesheimer: A review based knowledge in complex resource allocation problems; February;
on design, modeling and applications of computer experiments; April: 145
273 Kumar, S. and D.A. Nottestad; Capacity design: an application using
Batur, D. and S.-H. Kim; Fully sequential selection procedures with a discrete-event simulation and designed experiments; September; 729
parabolic boundary; September; 749 Kumar, S. and D.A. Nottestad; /ntegrated simulation application design
Baudin, M. Reviewed by J. Bard; Lean Logistics: The Nuts and Bolts of for short-term production scheduling: September; 737
Delivering Materials and Goods; September; 797
Ben-Daya, M. and S. El-Ferik; Age-based hybrid model for imperfect Lada, E.K., N.M. Steiger and J.R. Wilson; Performance evaluation of
preventive maintenance; April; 365 recent procedures for steady-state simulation analysis; September; 711
Leachman, R.C., M.M. Dessouky, Q. Lu and J. Zhao; An exact solution
Camponogara, E. and P. Nakashima; Optimizing gas-lift production of procedure to determine the optimal dispatching times for complex rail
oil wells: piecewise linear formulation and computational analysis: networks; February; 127
February; 159 Liao, H., E.A. Elsayed and X. Wang; An extended linear hazard regres-
Chao, X. and S. X. Zhou; Joint inventory-and-pricing strategy for a sion model with application to time-dependent dielectric breakdown of
stochastic continuous-review system; May; 401 thermal oxides; April; 329
Chen, V.C.P., K.-L. Tsui, R.R. Barton and M. Meckesheimer; A review Lu, Q., M.M. Dessouky, J. Zhao and R.C. Leachman; An exact solution
on design, modeling and applications of computer experiments; April; procedure to determine the optimal dispatching times for complex rail
273 networks; February; 127
Chung, W., S. Talluri and R. Narasimhan; An optimization model for
phased supplier integration into e-procurement systems; May; 389 Mandroli, S.S., A.K. Shrivastava and Y. Ding; A survey of inspection
Cook, W.D., R.H. Green and J. Zhu: Dual-role factors in data envelopment strategy and sensor distribution studies in discrete-part manufacturing
analysis; February; 91 processes; April; 309
Marar, A., W.B. Powell and S. Kulkarni; Combining cost-hased and rule-
Dessouky, M.M., Q. Lu, J. Zhao and R.C. Leachman; An exact solution based knowledge in complex resource allocation problems, February:
procedure to determine the optimal dispatching times for complex rail 145
networks; February; 127 Meckesheimer, M., V.C.P. Chen, K.-L. Tsui and R.R. Barton; A review
Ding, Y., S.S. Mandroli and A.K. Shrivastava; A survey of inspection on design, modeling and applications of computer experiments; April;
strategy and sensor distribution studies in discrete-part manufacturing 273
processes, April; 309 Mishra, D. and D. Veermani; An ascending price procurement auction for
multiple items with unit supply; February; 113
El-Ferik, S. and M. Ben-Daya; Age-based hybrid model for imperfect pre- Munakata, T. and A. Fadlalla; Consiraint isomorphism and the generation
ventive maintenance; April; 365 of stochastic data, May; 437
Elsayed, E.A., H. Liao and X. Wang; An extended linear hazard regression Murphy, A. and J.C. Hartman; Finite-horizon equipment replacement
model with application to time-dependent dielectric breakdown of analysis; May; 409
thermal oxides, April; 329
Nakashima, P. and E. Camponogara; Optimizing gas-lift production of
Fadlalla, A. and T. Munakata; Constraint isomorphism and the generation oil wells: piecewise linear formulation and computational analysis;
of stochastic data, May; 437 February; 159
Narasimhan, R., S. Talluri and W. Chung; An optimization model for
Green, R.H., W.D. Cook and J. Zhu; Dual-role factors in data envelopment phased supplier integration into e-procurement systems; May; 389
analysis, February; 91 Niaki, S.T.A. and W.H. Iskander; A principal-components approach to
assign confidence intervals in steady-state simulation; February; 103
Hartman, J.C. and A. Murphy; Finite-horizon equipment replacement Nottestad, D.A. and S. Kumar; Capacity design: an application using
analysis; May; 409 discrete-event simulation and designed experiments; September; 729
Huang, Q. and H. Wang; Error cancellation modeling and its application Nottestad, D.A. and S. Kumar; /ntegrated simulation application design
to machining process control; April; 355 for short-term production scheduling; September; 737
1142 Indices
Plante, R.D., PF. Zantek and G.P. Wright; A self-starting procedure Wang, H. and Q. Huang; Error cancellation modeling and its application
for monitoring process quality in multistage manufacturing systems; to machining process control; April; 355
April; 293 Wang, X., E.A. Elsayed and H. Liao; An extended linear hazard regres-
Powell, W.B., A. Marar and S. Kulkarni; Combining cost-hased and sion model with application to time-dependent dielectric breakdown of
rule-based knowledge in complex resource allocation problems; thermal oxides; April; 329
February: 145 Weng, M.X. and H. Ren; An efficient priority rule for schedulinjgo b shops
to minimize mean tardiness; September; 789
Qi, X., M. Xu, G. Yu and H. Zhang; Coordinating dyadic supply chains Wilson, J.R., E.K. Lada and N.M. Steiger: Performance evaluation of
when production costs are disrupted; September; 765 recent procedures for steady-state simulation analysis; September; 711
Wright, G.P., P-F. Zantek and R.D. Plante; A self-starting procedure
Ren, H. and M.X. Weng: An efficient priority rule for scheduling job shops for monitoring process quality in multistage manufacturing systems;
to minimize mean tardiness; September; 789 April; 293
Wu, Z. and S. Zhang; Monitoring the process mean and variance using
Shrivastava, A.K., S.S. Mandroli and Y. Ding: A survey of inspection a weighted loss function CUSUM scheme with variable sampling
strategy and sensor distribution studies in discrete-part manufacturing intervals; April; 377
processes, April; 309
Singh, M.P. and M.M. Srinivasan; An efficient exact procedure for the Xu, M., X. Qi, G. Yu and H. Zhang; Coordinating dyadic supply chains
analysis of the state-dependent polling model, February; 139 when production costs are disrupted; September; 765
Srinivasan, M.M. and M.P. Singh: An efficient exact procedure for the
analysis of the state-dependent polling model; February; 139 Yu, G., M. Xu, X. Qi and H. Zhang; Coordinating dyadic supply chains
Steiger, N.M., E.K. Lada and J.R. Wilson: Performance evaluation of when production costs are disrupted; September; 765
recent procedures for steady-state simulation analysis; September;
711 Zantek, P.F., G.P. Wright and R.D. Plante: A se/f-starting procedure
for monitoring process quality in multistage manufacturing systems;
Talluri, S.. W. Chung and R. Narasimhan; An optimization model for April; 293
phased supplier integration into e-procurement systems; May; 389 Zhang, H., M. Xu, X. Qi and G. Yu; Coordinating dyadic supply chains
Tsui, K.-L., V.C.P. Chen, R.R. Barton and M. Meckesheimer; A review on when production costs are disrupted; September; 765
design, modeling and applications of computer experiments; April; 273 Zhang, S. and Z. Wu: Monitoring the process mean and variance using a
weighted loss function CUSUM scheme with variable sampling inter-
van Dorp, J.R. and S. Kotz; A novel method for fitting unimodal continuous vals; April; 377
distributions on a bounded domain utilizing expert judgment estimates; Zhao. J.. M.M. Dessouky, Q. Lu and R.C. Leachman; An exact solution
May; 421 procedure to determine the optimal dispatching times for complex rail
Van Nieuwenhuyse, I. and N. Vandaele; Analysis of gap times in a two- networks; February; 127
stage stochastic flowshop with overlapping operations; September: Zhou, S. and N. Jin; Signature construction and matching for fault diagnosis
777 in manufacturing processes through fault space analysis; April; 341
Vandaele. N. and I. Van Nieuwenhuyse; Analysis of gap times in a two- Zhou, S. X. and X. Chao; Joint inventory-and-pricing strategy for a
stage stochastic flowshop with overlapping operations; September; 777 stochastic continuous-review system; May: 401
Veermani, D. and D. Mishra; An ascending price procurement auction for Zhu, J., W.D. Cook and R.H. Green; Dual-role factors in data envelopment
multiple items with unit supply; February; 113 analysis; February; 91
SUBJECT INDEX FOR 2006
1250 - 2150 — Queueing systems
Wang, H. and Q. Huang: Error cancellation modeling and its application Srinivasan M.M. and M.P. Singh; An efficient exact procedure for the
to machining process control, April; 355 analysis of the state-dependent polling model, February; 139
2015 — Integer programming 2220 — Integration of data and knowledge
Dessouky M.M., Q. Lu, J. Zhao and R.C. Leachman; An exact solution Marar, A., W.B. Powell and S. Kulkarni; Combining cost-hased and
procedure to determine the optimal dispatching times for complex rail rule-based knowledge in complex resource allocation problems:
networks; February; 127 February: 145
Camponogara, E. and P. Nakashima; Optimizing gas-lift production of
oil wells: piecewise linear formulation and computational analysis: 2245 -
February; 159 Mandroli, S.S., A.K. Shrivastava and Y. Ding; A survey of inspection
Talluri, S.. W. Chung and R. Narasimhan; An optimization model for strategy and sensor distribution studies in discrete-part manufacturing
phased supplier integration into e-procurement systems; May; 389 processes; April; 309
2035 — Data envelopment analysis 2300 — Simulation
Cook, W.D., R.H. Green and J. Zhu; Dual-role factors in data envelopment Niaki, S.T.A. and W.H. Iskander; A principal-components approach to
analysis; February; 91 assign confidence intervals in steady-state simulation, February:
103
2140 — Engineering statistics
Chen, V.C.P., K.-L. Tsui, R.R. Barton and M. Meckesheimer; A review 2305 — Design of experiments
on design, modeling and applications of computer experiments; April; Batur, D. and S.-H. Kim; Fully sequential selection procedures with a
273 parabolic boundary; September; 749