IIE Transactions 1996: Vol 28 Index

15 Pages·1996·3.4 MB·English

ITE Transactions (1996) 28, 1035—1044
DESIGN & MANUFACTURING
AUTHOR INDEX FOR 1996
Anderson, D.C. and C.G. Jensen; A review of numerically controlled assembly planning; April; 281
methods for finish-sculptured-surface machining; January; 30 Frein, Y., C. Commault and Y. Dallery; Modeling and analysis of
Arif, A. and A.B. Badiru, FLEXPERT: facility layout expert system closed-loop production lines with unreliable machines and finite
using fuzzy linguistic relationship codes; April; 295 buffers; July; 545
Fuh, J.Y.H., Xiuwen Gui and A.Y.C. Nee; Modeling of frictional
Badiru, A.B. and A. Arif; FLEXPERT: facility layout expert system elastic fixture-workpiece system for improving location accuracy;
using fuzzy linguistic relationship codes; April; 295 October; 821
Beardsley, B., E. Kroll and A. Parulian; A methodology to evaluate ease
of disassembly for product recycling, October; 837 Gao, J., K.W. Chase, S.P. Magleby and C.D. Sorenson; Including
Bowden, R. and S.F. Bullington; Development of manufacturing control geometric feature variations in tolerance analysis of mechanical
strategies using unsupervised machine learning; April; 319 assemblies; October; 795
Bozer, Y.A. and J.A. White; A generalized design and performance Garcia-Diaz, A. and H. Lee; Network flow procedures for the analysis of
analysis model for end-of-aisle order-picking systems; April; 271 cellular manufacturing systems; April; 333
Bullington, S.F. and R. Bowden; Development of manufacturing control Gui, Xiuwen, J.Y.H. Fuh and A.Y.C. Nee; Modeling of frictional
strategies using unsupervised machine learning; April; 319 elastic fixture-workpiece system for improving location accuracy;
October; 821
Chai, O.H., Y.S. Wong and A.N. Poo; An interpolation scheme for tool-
radius compensated parabolic paths for CNC; January; |1 Ha, Jong-Sung, Seung-Hak Choi, Sung-Yong Shin, Kyung-Yong
Chang, Soo-Young, Jong-Sung Ha, Seung-Hak Choi, Sung-Yong Chwa, Soo-Young Chang and T.C. Woo; On deciding 3D part
Shin, Kyung-Yong Chwa and T.C. Woo; On deciding 3D part disassemblability and surface machinability; October; 847
disassemblability and surface machinability; October; 847 Hazra, J. and A. Seidmann; Performance evaluation of closed tree-
Chase, K.W., J. Gao, S.P. Magleby and C.D. Sorenson; Jncluding structured assembly systems; July 591
geometric feature variations in tolerance analysis of mechanical Herer, Y.T., D. Sinriech and J.M.A. Tanchoco; The segmented bidir-
assemblies; October; 795 ectional single-loop topology for material flow systems; January; 40
Cheraghi, S.H., E.A. Lehtihet and P.J. Egbelu; Design and character- Hoberecht, W.C., J.C. Smith and §.B. Joshi; A shop-floor control
ization of a vision-assisted system for surjace-mount component architecture for computer-integrated manufacture; October; 783
placement; October; 855
Choi, Seung-Hak, Jong-Sung Ha, Sung-Yong Shin, Kyung-Yong lakovou, E., Chi M. Ip and C. Koulamas; Optimal machining speed and
Chwa, Soo-Young Chang and T.C. Woo; On deciding 3D part tool inventory policies in machining economic systems; July; 601
disassemblability and surface machinability; October; 847 Inman, R.R.; Scheduling preventive overtime: a new approach for the
Chwa, Kyung-Yong, Jong-Sung Ha, Seung-Hak Choi, Sung-Yong automotive industry; July; §
Shin, Soo-Young Chang and T.C. Woo; On deciding 3D part Ip, Chi M., E. lakovou and C. Koulamas; Optimal machining speed and
disassemblability and surface machinability; October; 847 tool inventory policies in machining economic systems; July; 601
Commault, C., Y. Frein and Y. Dallery; Modeling and analysis of
closed-loop production lines with unreliable machines and finite Jardine, A.K.S., X.G. Liu and V. Makis; Optimally maintaining an M
buffers; July; 545 G/1-type production system; January; 86
Culbreth, C.T., J.A. Joines and R.E. King; Manufacturing cell design Jensen, C.G. and D.C. Anderson; A review of numerically controlled
an integer programming model employing genetic algorithms; Janu- methods for finish-sculptured-surface machining; January; 30
ary; 69 Jeong, J. and K. Kim; Finding feasible tool-approach directions for
sculptured surface manufacture; October; 829
Dallery, Y., Y. Frein and C. Commault; Modeling and analysis of Joines, J.A., C.T. Culbreth and R.E. King; Manufacturing cell design
closed-loop production lines with unreliable machines and finite an integer programming model employing genetic algorithms; Janu-
buffers; July; 545 ary; 69
Dessouky, M.M., Ting Li Lin, K. Ravi Kumar and Shu Ming Ng; A Joshi, $.B., J.S. Smith and W.C. Hoberecht; A shop-floor control
heuristic-based procedure for the weighted production-cell formation architecture for computer-integrated manufacture, October; 783
problem; July; 579
Dutta, D. and D. Yip-Hoi; A genetic algorithm application for sequen- Kamran, M.,S. Yeh, J.M.E. Terry and B.O. Nnaji; A design advisor for
cing operations in process planning for parallel machining; January; sheet metal fabrication; January; 1
55 Kim, K. and J. Jeong; Finding feasible tool-approach directions for
sculptured surface manufacture, October; 829
Egbelu, P.J., S.H. Cheraghi and E.A. Lehtihet; Design and character- King, R.E., J.A. Joines and C.T. Culbreth; Manufacturing cell design
ization of a vision-assisted system for surface-mount component an integer programming model employing genetic algorithms; Janu-
placement; October; 855 ary; 69
Elsayed, E.A. and M.-K. Lee; Order processing in automated storage Koulamas, C., E. lakovou and Chi M. Ip; Optimal machining speed and
retrieval systems with due dates; July; 567 tool inventory policies in machining economic systems; July; 601
Kroll, E., B. Beardsley and A. Parulian; A methodology to evaluate ease
Fang, Ying-Che and U. Roy; Tolerance representation scheme for a of disassembly for product recycling; October; 837
three-dimensional product in an object-orientated programming en- Kumar, K. Ravi, Ting Li Lin, M.M. Dessouky and Shu Ming Ng; A
vironment; October; 809 heuristic-based procedure for the weighted production-cell formation
Ferriera, P.M. and O.E. Ruiz; Algebraic geometry and group theory in problem; July, 579
geometric constraint satisfaction for computer-aided design and
0740-817X © 1996 “IIE”
1036 Indices
Lee, H. and A. Garcia-Diaz; Network flow procedures for the analysis of geometric constraint satisfaction for computer-aided design and
cellular manufacturing systems; April; 333 assembly planning; April; 281
Lee, M.-K. and E.A. Elsayed; Order processing in automated storage
retrieval systems with due dates; July; 567 Seidmann, A. and J. Hazra; Performance evaluation of closed tree-
Lehtihet, E.A., S.H. Cheraghi and P.J. Egbelu; Design and character- structured assembly systems; July; 591
ization of a vision-assisted system for surface-mount component Shin, Sung-Yong, Jong-Sung Ha, Seung-Hak Choi, Kyung-Yong
placement, October; 855 Chwa, Soo-Young Chang and T.C. Woo; On deciding 3D part
Lin, Ting Li, M.M. Dessouky, K. Ravi Kumar and Shu Ming Ng; A disassemblability and surface machinability, October; 847
heuristic-based procedure for the weighted production-cell formation Sinriech, D., J.M.A. Tanchoco and Y.T. Herer; The segmented
problem, July; 579 bidirectional single-loop topology for material flow systems; January;
Liu X.G., V. Makis and A.K.S. Jardine; Optimally maintaining an M 40
G/1-type production system; January; 86 Smith, J.C., W.C. Hoberecht and S.B. Joshi; A shop-floor control
architecture for computer-integrated manufacture; October; 783
Magleby, S.P., K.W. Chase, J Gao and C.D. Sorenson; Jncluding Sorenson, C.D., K.W. Chase, J. Gao and S.P. Magleby; I/ncluding
geomet(rk feature variations in tolerance analysis of mechanical geometric feature variations in tolerance analysis of mechanical
assemblies, October; 795 assemblies, October; 795
Makis, V., X.G. Liu and A.K.S. Jardine; Optimally maintaining an M
G/1-type production system; January; 86 Tanchoco, J.M.A., D. Sinriech and Y.T. Herer; The segmented
bidirectional single-loop topology for material flow systems; January;
Nee, A. Y.C. Xiuwen Gui and J.Y.H. Fuh; Modelingo f frictional elastic 40
fixture-workpiece system for improving location accuracy; October; Terry, J.M.E., S. Yeh, M. Kamran and B.O. Nnaji; A design advisor
821 for sheet metal fabrication; January; |
Ng, Shu Ming, Ting Li Lin, M.M. Dessouky and K. Ravi Kumar; A Tetzleff, U.A.W.; A queueing network model for flexible manufacturing
heuristic-based procedure for the weighted production-cell formation systems with tool management; April; 309
problem; July; 579 Tsai, Du-Ming: Detecting and locating partly occluded planar parts by
Nnaji, B.O., S. Yeh, M. Kamran and J.M.E Terry; A design advisor clustering; July; 531
for sheet metal fabrication; January; |
White J.A. and Y.A. Bozer; A generalized design and performance
Parulian, A., E. Kroll and B. Beardsley; A methodology to evaluate analysis model for end-of-aisle order-picking systems; April; 271
ease of disassembly for product recycling; October; 837 Wong, Y.S., O.H. Chai and A.N. Poo; An interpolation scheme for
Poo, A.N., O.H. Chai and Y.S. Wong; An interpolation scheme for tool-radius compensated parabolic paths for CNC; January; 11
tool-radius compensated parabolic paths for CNC; January; 11 Woo, T.C., Jong-Sung Ha, Seung-Hak Choi, Sung-Y ong Shin, Kyung-
Powell, S.G. and D.F. Pyke; Allocation of buffers to serial production Yong Chwa and Soo-Young Chang; On deciding 3D part disas-
lines with bottlenecks; January; 18 semblability and surface machinability,; October; 847
Pyke, D.F. and S.G. Powell; Allocation of buffers to serial production
lines with bottlenecks; January; 18 Yeh, S., M. Kamran, J.M.E. Terry and B.O. Nnaji; A design advisor
for sheet metal fabrication; January; |
Roy, and Ying-Che Fang; Tolerance representation scheme for a Yip-Hoi, D. and D. Dutta; A genetic algorithm application for
three-dimensional product in an object-orientated programming en- sequencing operations in process planning for parallel mactining;
vironment, October; 809 January; 55
Ruiz, O.E. and P.M. Ferriera; i/gebraic geometry and group theory in
SUBJECT INDEX FOR 1996
1030
Chase, K.W., J Gao, S P Magleby and C.D. Sorenson; Jncluding
geometric feature variations in tolerance analysis of mechanical
assemblies, October; p. 795 lakovou, E., Chi M. Ip and C. Koulamas; Optimal machining speed and
Kroll, E., B. Beardsley and A. Parulian; A methodology to evaluate ease tool inventory policies in machining economic systems; July; p. 601
of disassembly for product recycling; October; p. 837
Ruiz, O.E. and P.M. Ferriera; Algebraic geometry and group theory in 1320
geometric constraint satisfaction for computer-aided design and Tetzleff, U.A.W.; A queueing network model for flexible manufacturing
assembly planning, April; p. 281 systems with tool management; April; p. 309
Yeh, S.,M. Kamran, J.M.E. Terry and B.O. Nnaji; A design advisor for
sheet metal fabrication, January, p. | 1330
Hazra, J. and A. Seidmann; Performance evaluation of closed tree-
1050 structured assembly systems; July; p. 591
Roy, | and Ying-Che Fang; Tolerance representation scheme for a Inman, R. R.; Scheduling preventive overtime: a new approach for the
three-dimensional product in an object-orientated programming en- automotive industry; July; p. 555
vironment, October; p. 809
1350
1066
Bowden, R. and S.F. Bullington; Development of manufacturing control
Ha, Jong-Sung, Seung-Hak Choi, Sung-Yong Shin, Kyung-Yong strategies using unsupervised machine learning; April; p. 319
Chwa, Soo-Young Chang and T.C. Woo; On deciding 3D part Smith, J.S., W.C. Hoberecht and S.B. Joshi; A shop-floor control
disassemblability and surface machinability; October; p. 847 architecture for computer-integrated manufacturing; October; p. 783
Indices 1037
1360 radius compensated parabolic paths for CNC; January; p. 11
Joines, J.A., C.T. Culbreth and R.E. King; Manufacturing cell design: Jensen, C.G. and D.C. Anderson; A review of numerically controlled
an integer programming model employing genetic algorithms; Janu- methods for finish-sculptured-surface machining; January; p. 30
tree- ary; p. 69
Lee, H. and A. Garcia-Diaz; Network flow procedurefso r the analysis of 1510
‘ong cellular manufacturing systems; April; p. 333 Du-Ming Tsai; Detecting and locating partly occluded planar parts by
part Lin, Ting Li, M.M. Dessouky, K. Ravi Kumar and Shu Ming Ng; A clustering; July; p. 531
heuristic-based procedure for the weighted production-cell formation
nted problem; July; p. 579 1515
lary; Powell, S.G. and D.F. Pyke; Allocation of buffers to serial production Xiuwen, Gui, J.Y.H. Fuh and A.Y.C. Nee; Modeling of frictional
lines with bottlenecks; January; p. 18 elastic fixture-workpiece system for improving location accuracy;
ntrol October; p. 821
3 1370
iding Frein, Y., C. Commault and Y. Dallery; Modeling and analysis of 1535
nical closed-loop production lines with unreliable machines and finite Yip-Hoi, D. and D. Dutta; A genetic algorithm application for sequen-
buffers; July; p. 545 cing operations in process planning for parallel machining; January;
p. 55
nted 1440
lary; Sinriech, D., J.M.A. Tanchoco and Y.T. Herer; The segmented bidir- 1540
ectional single-loop topology for material flow systems; January; p. Kim, K. and J. Jeong; Finding feasible tool-approach directions for
visor 40 sculptured surface manufacture, October; p. 829
uring 1450 2320
Bozer, Y.A. and J.A. White; A generalized design and performance Liu, X.G., V. Makis and A.K.S. Jardine; Optimally maintaining an M
ts by
analysis model for end-of-aisle order-picking systems; April; p. 271 G/1-type production system; January; p. 86
Elsayed, E.A. and M.-K. Lee; Order processing in automated storage
retrieval systems with due dates; July; p. 567 3220
ance
Badiru, A.B. and A. Arif; FLEXPERT: facility layout expert system
a 1505 using fuzzy linguistic relationship codes; April; p. 295
e for
Chai, O.H., Y.S. Wong and A.N. Poo; An interpolation scheme for tool-
ung-
GUEST REVIEWERS
lisas-
Mary Beth Algeo, NIST Professor Alan A. Desrochers, Rensselaer Polytechnic Institute
visor Professor Tayfur Altiok, Rutgers State University of New Jersey Dr. Gregory Diehl, Network Dynamics, Inc.
Sigrun Andradottir, Georgia Institute of Technology Ralph Disney, Texas A&M University
1 for Dr. Yohanan Arzi, Tel Aviv University Dr. Jian (John) Dong, The University of Michigan
ning; Ron Askin, University of Arizona Dr. Izak Duenyas, University of Michigan
Dr. Sourin Dutta, Windsor University
Professor Albert D. Baker, U. of Cincinnati
Pat Banerjee, University of Illinois, Chicago Gary W. Fischer, University of lowa
Rajan Batta, State University of New York, Buffalo Bobbie Foote, University of Oklahoma
Fayez Boctor, Laval University, Quebec, Canada Richard Francis, University of Florida
Professor Royce Bowden, Miss. State University
Yavuz Bozer, University of Michigan Dr. Rajit Gadh, Univ. of Wisconsin, Madison
Professor Dan Braha, Ben-Gurion University of the Negev, Israel Professor Michael Gevelber, Boston University
Dr. Kurt M. Bretthauer, Texas A&M University Professor Stephen M. Gilbert, Case Western Reserve University
d and Dr. Dennis Bricker, University of lowa Marc Goetschalckx, Georgia Tech
601 Dr. L. I. Burke, Lehigh University Dr. Satyandra K. Gupta, Carnegie Mellon University
Dr. S. Chakravarthy, GMI Engineering & Management Institute Professor A. Hamaad, Helwan University, Egypt
uring M.P. Chandrasekharan, Regional Engineering College, Calcutta, Professor Jian-Qiang Hu, Boston University
India
Dr. Shing I Chang, Kansas State University Shahrukh Irani, University of Minnesota
Tien-Chien Chang, Purdue University
tree- Dr. Xiuli Chao, NJIT John Jackman, Iowa State University
Professor Leonid Charny, Boston University Professor Sheldon Jacobson, Virginia Tech
w the Dilip Chhajed, University of Illinois at Urbana-Champaign Eric Johnson, Vanderbilt University
Fred Choobineh, University of Nebraska
Dr. Dave Christy, Pennsylvania State University Dr. Russell King, North Carolina State University
S. H. Chuang, Chung-Hsing University Dr. Ger Koole, INRIA Sophia Antipolis, France
mtrol Dr. Chao-Hsien Chu, Iowa State University Andrew Kusiak, University of lowa
Dr. Denis Cormier, North Carolina State University
mtrol Thomas Lacksonen, Ohio University
». 783 Dr. Wayne J. Davis, University of Illinois -C hampaign-Urbana Thomas Landers, University of Arkansas
1038 Indices Indic
Nick Larson, University of lowa Dr. Ramesh Rajagopalan, Mercer University
Professor H. Felix Lee, Southern Illinois University at Edwardsville Ronald I. Rardin, Purdue University
Dr. El Amine Lehtihet, Penn State University Professor Christopher M. Rump
Dr. Janny Leung, University of Arizona
Professor Jong-Tae Lim, Korea Advanced Inst. of Science and Dr. Bhaba R. Sarker, Louisiana State University at Baton-Rouge
Technology Dr. Dong Shaw, Purdue University
Agnet
Dr. Robert Lipset, Ohio University David Sinriech, Technion-Israel Institute of Technology
Charles R. Sox, Auburn University ni
Agnet
Professor Oded Maimon, Tel Aviv University, Israel Professor Rama Sreenivas, University of Illinois
scl
Suzanne Marcotte, Universite du Quebec a Trois-Rivieres, Quebec, Barna Szabados, McMaster University
Agra\
Canada
pr
Dr. Michael M. Marefat, University of Arizona K.Y. Tam, Hong Kong Inst. of Technology
Akell
Doug McBeth, lowa State University Dr. Valerie Tardif, University of Texas at Austin
Russell Meller, Auburn University Dr. Robert Tenney, Alphatech Inc. as
Ni
Dr. K. Jo Min, lowa State University Dr. Amy Trappey, National Tsing Hua University, Taiwan
Arms
Benoit Montreuil, University of Laval, Canada
Ed Mooney, Montana State University Dr. Reha Uzsoy, Purdue University nu
Arms
Professor Charles T. Mossier, Clarkson University
an
Dr. Asoo J. Vakharia, University of Florida
Artib
Dr. Shimon Nof, Purdue University Professor Pirooz Vakili, Boston University
Jeroen van den Berg, U. of Twente, The Netherlands m
Atkir
Dr. Nicholas G. Odrey, Lehigh University Uday Venkatadri, Laval University, Quebec, Canada
Jose Ventura, Penn State a
Brett Peters, Texas A&M University
Bard
Stephen Pollock, University of Michigan Dr. Jin Wang, Valdosa State University
Michael Pratt, NIST pr
Barn
Simin Pulat, University of Oklahoma Armen Zakarian, University of lowa
Dr. Guangming M. Zhang, University of Maryland “
Benj
Dr. Luis Rabelo, Ohio University Dr. Chen Zhou, Georgia Institute of Technology
M
Bloc!
oT
Brim
Indices
SCHEDULING AND LOGISTICS
AUTHOR INDEX FOR 1996
Agnetis, A., D. Pacciarelli and F. Rossi; Lot scheduling in a two- Dowling, P.D., J. Brimberg and R.F. Love; Estimating the parameters
machine cell with swapping devices; November; 911 of the weighted £p norm by linear regression; May; 363
Agnetis, A., M. Dror, A.J. Vakharia and F. Rossi; Tool handling and Dror, M., A. Agnetis, A.J. Vakharia and F. Rossi; Tool handling and
scheduling in a two-machine flexible manufacturing cell; May; 425 scheduling in a two-machine flexible manufacturing cell; May; 425
Agrawal, A., G. Harhalakis, I. Minis and R. Nagi; ‘Just in time’
production of large assemblies; August; 653 Eynan, A. and M.J. Rosenblatt; Component commonality effects on
Akella, R., H. Gurnani and J. Lehoczky; Optimal order policies in inventory costs; February; 93
assembly systems with random demand and random supplier delivery;
November; 865 Feo T.A., J.F. Bard and §.D. Holland; A GRASP for scheduling printed
Armstrong, R., S. Gu and Lei Lei; A greedy algorithm to determine the wiring board assembly; February; 155
number of transporters in a cyclic electroplating process; May; 347
Armstrong, M.J. and D.R. Atkins; Joint optimization of maintenance Gerchak, Y., A. Tripathy and K. Wang; Co-production models with
and inventory policies for a simple system; May; 415 random functionality yields; May; 391
Artiba, A., D.W. He and A. Kusiak; A scheduling problem in glass Gerchak, Y. and A. Grosfeld-Nir; Production to order with random
manufacturing, February; 129 vields: single-stage multiple lot-sizing; August; 669
Atkins, D.R. and M.J. Armstrong; Joint optimization of maintenance Grosfeld-Nir, A. and Y. Gerchak; Production to order with random
and inventory policies for a simple system; May; 415 vields: single-stage multiple lot-sizing; August; 669
Gu, S., R. Armstrong and Lei Lei; A greedy algorithm to determine the
Bard, J.F., T.A. Feo and S.D. Holland; A GRASP for scheduling number of transporters in a cyclic electroplating process; May; 347
printed wiring board assembly; February; 155 Gunn, E.A. and G. Cormier; On coordinating warehouse sizing, leasing
Barnes, J.W. and W.B. Carlton; Solving the traveling-salesman problem and inventory policy; February; 149
with time windows using tabu search; August; 617 Gurnani, H., R. Akella and J. Lehoczky; Optimal order policies in
Benjaafar, S.; On production batches, transfer batches, and lead times; assembly systems with random demand and rendom supplier delivery;
May; 357 November; 865
Blocher, J.D. and S. Chand; An improved lower bound for the change-
over scheduling problem; November; 901 Harhalakis, G., A. Agrawal, I. Minis and R. Nagi; ‘Just in time’
Brimberg, J., P.D. Dowling and R.F. Love; Estimating the parameters production of large assemblies; August; 653
of the weighted fp norm by linear regression; May; 363 Hariga, M.A. and P.L. Jackson; The warehouse scheduling problem
formulation and algorithms; February; 115
Cabot, A.V., W.J. Lee and Daesoo Kim; Optimal demand rate, lot He, D.W., Kusiak and A. Artiba; A scheduling problem in glass
sizing, and process reliability improvement decisions; November; 941 manufacturing; February; 129
Campbell, G.M.; Cyclic assembly schedules for dynamic demands; Holland, $.D., T.A. Feo and J.F. Bard; A GRASP for scheduling
August; 643 printed wiring board assembly; February; 155
Carlton, W.B. and J.W. Barnes; Solving the traveling-salesman problem Hormozi, A.M. and B.M. Khumawala; An improved algorithm for
with time windows using tabu search; August; 617 solving a multi-period facility location problem; February; 105
Chand, S. and J.D. Blocher; An improved lower bound for the change-
over scheduling problem, November; 901 Jackson, P.L. and M.A. Hariga; The warehouse scheduling problem
Chang, Yih-Long, T. Sueyoshi and R.S. Sullivan; Ranking dispatching formulation and algorithms; February; 115
rules by data envelopment analysis in a job shop environment; August; Jackson, P.L. and U.S. Rao; Estimating performance measures in
631 repetitive manufacturing environments via stochastic cyclic schedul-
Chen, Z.-L., T.C.E. Cheng, M.Y. Kovalyov and B.M.T. Lin; Parallel- ing; November; 929
machine batching and scheduling to minimize total completion time:
November; 953 Khumawala, B.M. and A.M. Hormozi; An improved algorithm for
Chen, Z.L., T.C.E. Cheng and Chung-Lun Li; Parallel-machine solving a multi-period facility location problem; February; 105
scheduling with controllable processing times; February; 17 Kim, Daesoo, W.J. Lee and A.V. Cabot; Optimal demand rate, lot
Cheng, Liping and Fong-Yuen Ding; Modifving-model assembly line sizing and process reliability improvement decisions; November; 941
sequencing methods to consider weighted variations for just-in-time Kirca, O. and M.M. Kéksalan; An integrated production and financial
production systems; November; 919 planning model and an application; August; 677
Cheng, T.C.E., Z.-L. Chen, M.Y. Kovalyov and B.M.T. Lin; Parallel- K6éksalan, M.M. and O. Kirca; An integrated production and financial
machine batching and scheduling to minimize total completion time; planning model and an application; August; 677
November; 953 Kovalyov, M.Y., T.C.E. Cheng, Z.-L. Chen and B.M.T. Lin; Parallel-
Cheng, T.C.E., Z.L. Chen and Chung-Lun Li; Parallel-machine sche- machine batching and scheduling to minimize total completion time;
duling with controllable processing times; February; 177 November; 953
Coffin, M.A. and B.W. Taylor III; R&D project selection and schedul- Kusiak, A., D.W. He and A. Artiba; A scheduling problem in glass
ing with filtered beam search approach; February; 167 manufacturing; February; 129
Cormier. G. and E.A. Gunn; On coordinating warehouse sizing, leasing
and inventory policy; February; 149 Landers, T.L., M. Sadiq and G.D. Taylor; An assignment algorithm for
dynamic picking systems; August; 607
Ding, Fong-Yuen and Liping Cheng; Modifying-model assembly line Lee, H.L. and M.J. Rosenblatt; The effects of work-in-process inventory
sequencing methods to consider weighted variations for just-in-time costs on the design and scheduling of assembly lines with low
production systems; November; 919 throughput and high component costs; May; 405
1040 Indices
Lee, Hyo-Seong and M.M. Srinivasan; Production-inventory systems Rosenblatt, M.J. and H.L. Lee; The effects of work-in-process inventor)
with preventive maintenance, November; 879 costs on the design and scheduling of assembly lines with low
Lee, W.J., Daesoo Kim and A.V. Cabot; Optimal demand rate, lot throughput and high component costs; May; 405
sizing, and process reliability improvement decisions; November9;4 1 Rossi, F., A. Agnetis and D. Pacciarelli; Lot scheduling in a two-
Lehoczky, J., R. Akella and H. Gurnani; Optimal order policies in machine cell with swapping devices; November; 911
assembly systems with random demand and random supplier delivery; Rossi, F., A. Agnetis, M. Dror and A.J. Vakharia; Tool handling and
November; 865 scheduling in a two-machine flexible manufacturing cell; May; 425
Lei Lei, R. Armstrong and S. Gu; A greedy algorithm to determine the
number of transporters in a cyclic electroplating process; May; 347 Sadiq, M., T.L. Landers and G.D. Taylor; An assignment algorithm for
Li, Chung-Lun, T.C.E. Cheng and Z.L. Chen; Parallel-machine sche- dynamic picking systems; August; 607
duling with controllable processing times; February; 177 Sharp, G.P. and C.S. Yoon; A structured procedure for analysis and
Lin, B.M.T., T.C.E. Cheng, Z.-L. Chen and M.Y. Kovalyov; Parallel- design of order pick systems; May; 379
machine batching and scheduling to minimize total completion time; Sox, C.R. and J.A. Muckstadt; Multi-item, multi-period production
November; 953 planning with uncertain demand; November; 891
Love, R.F., J. Brimberg and P.D. Dowling; Estimating the parameters Srinivasan, M.M. and Hyo-Seong Lee; Production-inventory systems
of the weighted fp norm by linear regression, May; 363 with preventive maintenance, November; 879
Sueyoshi, T., Yih-Long Chang and R.S. Sullivan; Ranking dispatching
Metters, R. and V.A. Vargas; Adapting lot-sizing techniques to stochas- rules by data envelopment analysis in a job shop envirox:nent; August;
tic demand through production scheduling policy; February; 141 631
Minis, I., Agrawal, G. Harhalakis and R. Nagi; ‘Just in time’ produc- Sullivan R.S., Yih-Long Chang and T. Sueyoshi; Ranking dispatching
tion of large assemblies; August; 653 rules by data envelopment analysis in a job shop environment; August;
Mooney, E.L., R.L. Rardin and W.J. Parmenter; Large-scale class- 631
room scheduling, May: 369
Muckstadt, J.A. and C.R. Sox; Multi-item, multi-period production Taylor II, B.W. and M.A. Coffin; R&D project selection and schedul-
planning with uncertain demand; November; 891 ing with a filtered beam search approach, February; 167
Taylor, G.D., M. Sadiq and T.L. Landers; An assignment algorithm for
Nagi, R., A. Agrawal, G. Harhalakis and I. Minis; ‘Just in time dynamic picking systems, August; 607
production of large assemblies; August; 653 Tripathy, A., Y. Gerchak and K. Wang; Co-production models with
random functionality yields; May; 391
Pacciarelli, D., A. Agnetis and F. Rossi; Lot scheduling in a two- Tseng, Sheng-Tsaing; Optimal preventive maintenance policy for dete-
machine cell with swapping devices; November; 911 riorating production systems, August; 687
Parmenter, W.J., E.L. Mooney and R.L. Rardin; Large-scale class- Vakharia, A.J., A. Agnetis, M. Dror and F. Rossi; Tool handling and
room scheduling. May: 369 scheduling in a two-machine flexible manufacturing cell; May; 425
Vargas, V.A. and R. Metters; Adapting lot-sizing techniques to stochas-
Rao, U.S and P.L. Jackson; Estimating performance measures in tic demand through production scheduling policy, February; 141
repetitive manufacturing environments via stochastic cyclic schedul-
ing; November; 929 Wang, K., Y. Gerchak and A. Tripathy; Co-production models with
Rardin, R.L., E.L. Mooney and W.J. Parmenter; Large-scale class- random functionality yields; May; 391
room scheduling, May; 369
Rosenblatt, M.J. and A. Eynan; Component commonality effects on Yoon, C.S. and G.P. Sharp; A structured procedure for analysis and
inventory costs; February; 93 design of order pick systems, May; 379
SUBJECT INDEX FOR 1996
3000 assembly systems with random demand and random supplier delivery;
Armstrong, M.J. and D.R. Atkins; Joint optimization of maintenance November; p. 865
and inventory policies for a simple system; May; p. 415
Eynan, A. and M.J. Rosenblatt; Component commonality effects on 3040
inventory costs, February; p. 93 Armstrong, M.J. and D.R. Atkins; Joint optimization of maintenance
Gerchak, Y., A. Tripathy and K. Wang; Co-production models with and inventory policies for a simple system; May; p. 415
random functionality yields; May; p. 391 Srinivasan, M.M. and Hyo-Seong Lee; Production-inventory systems
Grosfeld-Nir, A. and Y. Gerchak; Production to order with random with preventive maintenance, November; p. 879
vields; single-stage multiple lot-sizing; August; p. 669 Tseng, Sheng-Tsaing; Optimal preventive maintenance policy for dete-
Gurnani, H., R. Akella and J. Lehoczky; Optimal order policies in riorating production systems, August; p. 687
assembly systems with random demand and random supplier delivery;
November; p. 865 3060
Srinivasan, M.M. and Hyo-Seong Lee; Production-inventory systems Eynan, A. and M.J. Rosenblatt; Component commonality effects on
with preventive maintenance, November; p. 879 inventory costs; February; p. 93
Tseng, Sheng-Tsaing; Optimal preventive maintenance policy for dete-
riorating production systems, August; p. 687 3070
Gerchak, Y., A. Tripathy and K. Wang; Co-production models with
3020 random functionality yields; May; p. 391
Armstrong, M.J. and D.R. Atkins; Joint optimization of maintenance Grosfeld-Nir, A . and Y. Gerchak; Production to order with random
and inventory policies for a simple system, May; p. 415 vields: single-stage multiple lot-sizing; August; p. 669
Gurnani, H., R. Akella and J. Lehoczky; Optimal order policies in
Indices 1041
3340
Gurnani, H., R. Akella and J. Lehoczky; Optimal order policies in Campbell, G.M.; Cyclic assembly schedules for dynamic demands;
assembly systems with random demand and random supplier delivery; August; p. 643
November; p. 865 Carlton, W.B. and J.W. Barnes; Solving the traveling-salesman problem
with time windows using tabu search; August; p. 617
3100 Cheng, Liping and Fong-Yuen Ding; Modifying mixed-model assembly
Kirca, O. and M.M. Kéksalan; An integrated production and financial line sequencing methods to consider weighted variations for just-in-
planning model and an application; August; p. 677 time production systems, November; p. 919
Sadiq, M., T.L. Landers and G.D. Taylor; An assignment algorithfmo r
3110 dynamic picking systems; August; p. 607
Kirca, O. and M.M. Kdéksalan; An integrated production and financial
planning model and an application; August; p. 677 3400
Agrawal, A., G. Harhalakis, I. Minis and R. Nagi; ‘Just in time’
3200 production of large assemblies; August; p. 653
Brimberg, J., P.D. Dowling and R.F. Love; Estimating the parameters Benjaafar, S.; On production batches, transfer batches, and lead times;
of the weighted £, norm by linear regression; May; p. 363 May; p. 357
Hormozi, A.M. and B.M. Khumawala; An improved algorithm for Hariga, M.A. and P.L. Jackson; The warehouse scheduling problem:
solving a multi-period facility location problem; February; p. 105 formulation and algorithms; February; p. 115
Lee, W.J., Daesoo Kim and A.V. Cabot; Optimal demand rate, lot
3215 sizing, and process reliability improvement decisions; November; p.
Hormozi, A.M. and B.M. Khumawala; An improved algorithm for 94]
solving a multi-period facility location problem; February; p. 105 Rosenblatt, M.J. and H.L. Lee; The effects of work-in-process inventory
costs on the design and scheduling of assembly lines with low
3225 throughput and high component costs; May; p. 405
Hormozi, A.M. and B.M. Khumawala; An improved algorithm for Sox, C.R. and J.A. Muckstadt; Multi-item, multi-period production
solving a multi-period facility lecation problem; February; p. 105 planning with uncertain demand; November; p. 891
3240 3410
Brimberg, J., P.D. Dowling and R.F. Love; Estimating the parameters Cormier, G. and E.A. Gunn; On coordinating warehouse sizing, leasing
of the weighted £, norm by linear regression; May; p. 363 and inventory policy; February; p. 149
Rosenblatt, M.J. and H.L. Lee; The effects of work-in-process inventory
3255 costs on the design and scheduling of assembly lines with low
throughput and high component costs; May; p. 405
Carlton, W.B. and J.W. Barnes; Solving the traveling-salesman problem
with time windows using tabu search, August; p. 617
3450
3300 Agrawal, A., G. Harhalakis, I. Minis and R. Nagi; ‘Just in time’
production of large assemblies; August; p. 653
Armstrong, R., S. Gu and Lei Lei; A greedy algorithm to determine the
number of transporters in a cyclic electroplating process; May; p. 347 Cormier, G. and E.A. Gunn; On coordinating warehouse sizing, leasing
and inventory policy; February; p. 149
Chang, Yih-Long, T. Sueyoshi and R.S. Sullivan; Ranking dispatching
Hariga, M.A. and P.L. Jackson; The warehouse scheduling problem:
rules by data envelopment analysis in a job shop environment; August;
formulation and algorithms; February; p. 115
p. 631
Lee, W.J., Daesoo Kim and A.V. Cabot; Optimal demand rate, lot
Sadiq, M., T.L. Landers and G.D. Taylor; An assignment algorithm for
sizing, and process reliability improvement decisions; November; p.
dynamic picking systems; August; p. 607
Yoon, C.S. and G.P. Sharp; A structured procedure for analysis and 94)
design of order pick systems; May; p. 379 Rosenblatt, M.J. and H.L. Lee; The effects of work-in-process inventory
costs on the design and scheduling of assembly lines with low
throughpui and high component costs; May; p. 405
3310
Sox, C.R. and J.A. Muckstadt; Multi-item, multi-period production
Chang, Yih-Long, T. Sueyoshi and R.S. Sullivan; Ranking dispatching
planning with uncertain demand; November; p. 891
rules by data envelopment analysis in a job shop environment; August;
p. 631
3460
Benjaafar, S.; On production batches, transfer batches, and lead times;
3330
May; p. 357
Armstrong, R., S. Gu and Lei Lei; A greedy algorithm to determine tie
number of transporters in a cyclic electroplating process; May; p. 347
3470
Benjaafar, S.; On production batches, transfer batches, and lead times;
Benjaafar, S.; On production batches, transfer batches, and lead times;
May; p. 357
May; p. 357
Cormier, G. and E.A. Gunn; On coordinating warehouse sizing, leasing
Lee, W.J., Daesoo Kim and A.V. Cabot; Optimal demand rate, lot
and inventory policy; February; p. 149
sizing, and process reliability improvement decisions; November; p.
Cheng, Liping and Fong-Yuen Ding; Modifying mixed-model assembly
94]
line sequencing methods to consider weighted variations for just-in-
Sox, C.R. and J.A. Muckstadt; Multi-item, multi-period production
time production systems; November; p. 919
planning with uncertain demand; November; p. 891
Sadiq, M., T.L. Landers and G.D. Taylor; An assignment algorithm for
Vargas, V.A. and R. Metters; Adapting lot-sizing techniques to stochas-
dynamic picking systems; August; p. 607
tic demand through production scheduling policy; February; p. 141
Yoon, C.S. and G.P. Sharp; A structured procedure for analysis and
design of order pick systems; May; p. 379
Indices
scheduling in a two-machine flexible manufacturing cell; May; p. 425
Agnetis, A., M. Dror, A.J. Vakharia and F Rossi; Tool handling and Agnetis, A., D. Pacciarelli and F. Rossi; Lot scheduling in a two-
scheduling in a two-machine flexible manufacturing cell; May; p. 425 machine cell with swapping devices; November; p. 911
Agnetis, A., D. Pacciarelli and F. Rossi; Lot scheduling in a two- Blocher, J.D. and S. Chand; An improved lower bound for the change-
machine cell with swapping devices; November; p. 911 over scheduling problem, November; p. 901
Blocher, J.D. and S. Chand; An improved lower bound for the change- Cheng, T.C.E., Z.L. Chen and Chung-Lun Li; Parallel-machine sche-
over scheduling problem; November; p. 901 duling with controllable processing times; February; p. 177
Campbell, G.M.; Cyclic assembly schedules for dynamic demands; Cheng, T.C.E., Z.-L. Chen, M.Y. Kovalyov and B.M.T. Lin; Parallel-
August; p. 643 machine batching and scheduling to minimize total completion time;
Cheng, T.C.E., Z.1 Chen and Chung-Lun Li; Parallel-machine sche- November; p. 953
duling with controllable processing times; February; p 177 Feo, T.A., J.F. Bard and S.D. Holland; A GRASP for scheduling
Cheng, Liping and Fong-Yuen Ding; Modifying mixed-model assembl) printed wiring board assembly; February; p. 155
line sequencing methods to consider weighted variations for just-in- Rao, U.S. and P.L. Jackson; Estimating performance measures in
time production systems, November; p. 919 repetitive manufacturing environments via stochastic cyclic schedul-
Coffin, M.A. and B.W. Taylor Il; R&D project selection and schedul- ing; November; p. 929
ing with a filtered beam search approach; February; p. 167
Feo, T.A., J.F. Bard and S.D. Hoiiand: A GRASP for scheduling 3540
printed wiring board assembly; February; p. 155 Coffin, M.A. and B.W. Taylor Ill; R&D project selection and schedul-
He, D.W., A. Kusiak and A. Artiba; A scheduling problem in glass ing with a filtered beam search approach, February; p. 167
manufacturing, February; p. 129 He, D.W., A. Kusiak and A. Artiba; A scheduling problem in glass
Mooney, E.L., R.L. Rardin and W.J Parmenter; Large-scale class- manufacturing; February; p. 129
room scheduling; May; p. 369
Rao, U.S. and P.1 Jackson; Estimating performance measures in 3560
repetitive manufacturing environments via stochastic cyclic schedul- Mooney, E.L., R.L. Rardin and W.J. Parmenter; Large-scale class-
ing; November; p. 929 room scheduling, May; p. 369
Vargas, V.A. and R. Metters; Adapting lot-sizing techniques to stochas-
tic demand through production scheduling policy, February; p. 141 3570
Feo, T.A., J.F. Bard and S.D. Holland; A GRASP for scheduling
3530 printed wiring board assembly; February; p. 155
Agnetis, A., M. Dror, A.J. Vakharia and F. Rossi; Tool handling and
GUEST REVIEWERS FOR 1996
Prakash Abad, McMaster University Richard Daniels, Georgia Tech
Prabhu Aggrawal, College of William and Mary Tapas Das, University of South Florida
Narenda Agrawal, Santa Clara University Sriram Dasu
Reza Ahmadi, UCLA Milind Dawande
Bahram Alidaee, West Texas State University Ton de Kok, Eindhoven University of Technology
Shoshana Anily, Columbia University Erik Demeulemeester
Ravi Anupindi, Northwestern University Mosutapha Diaby
R. Asthana Paul Dixon
Derek Atkins, University of British Columbia K.J. Dooley, University of Minnesota
Sven Axsater, Lund University Izak Duenyas, University of Michigan
Hayriye Ayhan, Georgia Tech
Haldun Aytung, University of North Carolina E.A. Elsayed, Rutgers University
Farhad Azadivar, Kansas State University Nesim Erkip, Middle East Technical University
Ricardo Ernst, Georgetown University
Kenneth Baker, Dartmouth College Amit Eynan, Washington University
Yehuda Bassok, Northwestern University
Rajan Batta Richard Feldman, Texas A&M University
James Bean, University of Michigan Bob Foote, University of Oklahoma
Menachem Berg, University of Haifa John Fowler, Arizona State University
Emre Berk, Univeristy of Washington
Peter Billington Guillermo Gallego
Dennis Blumenfeld, General Motors Research & Development Center Michel Gendreau, Université de Montreal
Karla Sourland, Dartmouth College Andre Gascon, Université Laval, Canada
Robert Bulfin, Auburn University Srinagesh Gaverneni
Fred Glover, University of Colorado
Xiaogiang Cai, Chinese University of Hong Kong Harold Groenevelt
Tom M. Cavalier, Penn State University Abraham Grosfeld-Nir, Tel Aviv University
Beth Chance, University of the Pacific Jatinder Gupta, Ball State
Fangruo Chen
Dinah Cheng Albert Ha, Vale School of Management
Wen Chiang, Univ. of Tulsa Nicholas Hall
Frank Ciarallo, University of Arizona Qi-Ming He, University of Waterloo
Willy Herroelen, Leuven
Indices
Jeff Herrmann, University of Maryland Meir Rosenblatt, Washington University
Wallace Hopp Kaj Rosling, Linkoping Institute of Technology
Vernon Ning Hsu, George Mason University Robin Roundy, Cornell University
Oya Icmeli Charles Schmidt, University of Alabama
Tapan Sen, North Carolina A&T State University
Peter Jackson, Cornell University Edward Sewell, Southern Illinois University at Edwardsville
Dev Joneja Dong Shaw
Hanif D. Sherali, Virginia Polytechnic Institute and State University
Roman Kapuscinski Medini Singh, Dartmouth College
Daesoo Kim, Marquette University Jeanette Song, Columbia University
Christos Koulamas, Florida International University Mark Spearman
George Steiner, McMaster
Gilbert Laporte, Université de Montreal Robert Storer, Lehigh University
Eva Lee
Chung-Yee Lee George Tagaras, Aristoteles University of Thessaloniki
Heungsoon Felix Lee, Southern Illinois University at Edwardsville Eric Taillard, Université de Montreal
Hyo-Seong Lee, Kyung Hee University Sridhar Tayur
Lei Lei, Rutgers University Richard Tersine, University of Oklahoma
Jorge Leon, Texas A&M University Devanath Tirupathi
Eugene Levner, Hebrew University Sheng-Tsiang Tseng, National Taiwan Institute of Technology
Surya Liman, Texas Tech University
C.L. Lin, Bradley University Gunduz Ulusoy, Bogazici University
William Lovejoy, University of Michigan Reha Uzsoy, Purdue University
Peter Luh, University of Connecticut
George Vairaktarakis, Marquette University
Vincent Mabert, Indiana University Asoo Vakharia, Univ. of Florida
Leon F. McGinnis, Georgia Institute of Technology Ann van Ackere, London Business School
Robert Millen, Northeastern University Mark van Oyen, Northwestern University
John Miltenburg Mike Veatch, Gordon College
Iikyeong Moon, Pusan Raymond Vickson, University of Waterloo
Irfan Ovacik, Purdue Scott Webster, University of Wisconsin-Madison
Larry Wein, MIT
Mahmut Parlar, McMaster University Howard Weiss, Temple University
Barry Pasternack, Information Systems Charles Wells, University of Dayton
Christopher Potts, University of Southampton David Wu, Lehigh University
David Pyke, University of Pennsylvania
R. Yang
Sampath Rajagopalan, University of Southern California Candace Yano, University of Southern California
Ram Rachamadugu, University of Toledo
Ronald Rardin, Purdue University Alex Zhang, University of Southern California
Uday Rao, Carnegie Mellon University
Indices Indic
2310
IE RESEARCH
Kapu!
tio
AUTHOR INDEX FOR 1996
2320
Makis
Artiles-Leon, N., H.T. David and H.D. Meeks; Statistical optimal Lau, Hon-Shiang, A. Hing-Ling Lau and Yue Zhang; A simple and
Jui
design of control charts with supplementary stopping rules; March; logical alternative for making PERT time estimates; March; 183
795 2325
Askin, R.G. and J.G. Demmel; Multiobjective evaluation of advanced Mackin, P., E. Del Castillo and D.C. Moritgomery; Multiple-criteria
Artile
manufacturing system technology investments with risk; March; 249 optimal design of X control charts; June; 467
Makis, V.; Optimal tool replacement with asymmetric quadratic loss;
Boyle, C.R. and W.S. Shin; An interactive multiple-response simulation June; 463
optimization method, June; 453 Meeks, H.D., N. Artiles-Leon and H.T. David; Statistical optimal
Burke, L.I., R.H. Storer, L.L. Lansing and S.W. Flanders; A neural- design of control charts with supplementary stopping rules; March;
network approach to prediction of vehicle driving comfort; June; 439 995
Molnau, W E. and J.B. Keats; A rule-based approach to multiple
Cheng, Chuen-Sheng and N.F. Hubele; A pattern recognition algorithm statistical test analysis of binary data; March; 203
for an ¥ control chart; March; 215 Montgomery, D.C. and E. Del Castillo; A general model for the optimal
Cho, Byung-Rao and K.C. Kapur; Economic design of the specification economic design of X charts used to control short or long run
region for multiple quality characteristics, March; 237 processes, March; 193
Montgomery, D.C., E. Del Castillo and P. Mackin; Multiple-criteria
David, H.T., N. Artiles-Leon and H.D. Meeks; Statistical optimal optimal design of X control charts; June; 467
design of control charts with supplementary stopping rules; March;
225 Parkhideh, B. and S. Parkhideh; The economic design of a flexible zone
Del Castillo, E.a nd D.C. Montgomery; A general model for the optimal X-chart with AT&T rules; March; 261
economic design of X charts used to control short or long run Parkhideh, S. and B. Parkhideh; The economic design of a flexible zone
processes, March; 193 X-chart with AT&T rules, March; 261
Del Castillo, E., P. Mackin and D.C. Montgomery; Multiple-criteria
optimal design of X control charts; June; 467 Reynolds, M.R.; Variable-sampling-interval control charts with sam-
Demmel, J.G. and R.G. Askin; Multiobjective evaluation of advanced pling at fixed times; June; 497
manufacturing system technology investments with risk; March; 249 Runger, G.C. and T.R. Willemain; Batch-means control charts for
autocorrelated data; June; 483
Flanders, S.W., L.I. Burke, R.H. Storer and L.L. Lansing; A neural-
network approach to prediction of vehicle driving comfort, June; 439 Shin, W.S. and C.R. Boyle; An interactive multiple-response simulation
optimization method; June; 453
Geyer, P. Lee, S.H. Steiner and G.O. Wesolowsky; Optimal SP RT and Song, Wheyming Tina and Chien Chou Su; An extension of the multi-
CUSUM procedures with compressed-limit gauges; June; 489 ple-blocks strategy on estimating simulation metamodels; June; 511
Steiner, S.H., P. Lee Geyer and G.O. Wesolowsky; Optimal SP RT and
Hubele, N.F. and Chuen-Sheng Chen; A pattern recognition algorithm CUSUM procedures with compressed-limit gauges; June; 489
for an X control chart, March; 215 Storer, R.H., L.1. Burke, L.L. Lansing and S.W. Flanders; A neural-
network approach to prediction of vehicle driving comfort; June; 439
Kapur, K.C. and Byung-Rae Cho; Economic design of the specification Su, Chien Chou and Wheyming Tina Song; An extension of the multi-
region for multiple quality characteristics; March; 237 ple-blocks strategy on estimating simulation metamodels; June; 511
Keats, J.B. and W.E. Molnau; A rule-based approach to multiple
statistical test analysis of binary data; March; 203 Wesolowsky, G.O., P. Lee Geyer and S.H. Steiner; Optimal SPRT and
Klein, M.; Composite Shewhart-EWMA statistical control schemes; CUSUM procedures with compressed-limit gauges; June; 489
June; 475 Willemain, T.R. and G.C. Runger; Batch-means control charts for
autocorrelated data; June; 483
Lansing, L.L., L.1. Burke, R.H. Storer and S.W. Flanders; A neural-
network approach to prediction of vehicle driving comfort; June; 439 Zhang, Yue, A. Hing-Ling Lau and Hon-Shiang Lau; A simple and
Lau, A. Hing-Ling, Hon-Shiang Lau and Yue Zhang; A simple and logical alternativfeo r making PERT time estimates; March; 183
logical alternative for making PERT time estimates, March; 183
SUBJECT INDEX FOR 1996
2060 2200
Demmel, J. G. and R. G. Askin; Multiobjective Evaluation of Advanced Burke, L. I., R. H. Storer, L. L. Lansing and S. W. Flanders, A Neural-
Manufacturing System Technology Investments With Risk; March; network Approach to Prediction of Vehicle Driving Comfort; June; p.
p. 249 439
2140 2300
Lau, A. Hing-Ling, Hon-Shiang Lau and Yue Zhang, A Simple and Geyer, P. Lee, S. H. Steiner and G. O. Wesolowsky; Optimal SP RT and
Logical Alternative for Making PERT Time Estimates; March; p. CUSUM Procedures with Compressed-limit Gauges; June; p. 489
183 Molnau, W. E. and J. B. Keats, A Rule-Based Approach to Multiple
Statistical Test Analysis of Binary Data; March; p. 203