high-performance tools

194 Pages·2014·9.11 MB·English

OUR COMMITMENT TO YOU...
(cid:2) 100% USA MADE PREMIUM
INDUSTRIAL QUALITY PRODUCTS
(cid:2) 95% ORDER FULFILLMENT
(cid:2) SAME DAY SHIPPING
.
(cid:2) NO MINIMUM ORDER REQUIREMENTS
(cid:2) EXCEPTIONAL QUALITY CONTROL
.
ALL TOOLS ARE 100% MADE IN THE USA
PVD Coating Advantages and Usage
Many of our tools are available in a variety of coatings
which increase cutting tool performance in terms of wear
resistance, abrasion prevention, corrosion and oxidation
at high temperatures.
.
Based on PVD technology (Physical Vapor Deposition)
and using Cathode ARC technology, we offer the highest
standard of modern coating technology for High Speed
Steel, M42 Cobalt and Tungsten Carbide.
2
PVD Coatings Available:
ALTIN is a high performance coating for milling, tapping and drilling in stainless steels, carbon
ALTIN
steels, alloy steels, and cast iron. This coating is extremely heat resistant and can be used with
or without coolant. It is exceptional in difficult to machine materials where adhesive wear is
particularily high.
ALCRO-MAX is a Triple Platit Coating based on AlCrN with a titanium addition. Triple Coatings
ALCRO-MAX
are deposited with 3 sections freely programmed in one batch. ALCRO-MAX has been engi-
neered to give an optimum balance between the toughness of the core layer and the abrasion
resistance of the top nano-layer. Titanium’s addition reduces the adhesive wear compared to
conventional AlCrN coatings, increases the micro-hardness up to 3500Hv and stops the crack
propagation through the coating. ALCRO-MAX is mostly suitable when machining tool steel
.
and shows excellent behavior for wet and MQL (minimum quantity lubrication) conditions.
TICN is a general purpose coating used for milling a wide variety of materials. This would be
TICN
an option when ALTIN cannot be used, as in applications that can’t generate the speeds and
feeds required for higher cutting temperatures.
ZRN is a high performance coating for milling non-ferrous materials such as aluminum.
ZRN
It prevents edge build up that is typical in soft and sticky materials.
SUPER TIN is a special multilayer coating for tapping and drilling in a wide variety of materials.
SUPER TIN
It’s generally used in applications with lower cutting speeds.
HIGH-PERFORMANCE TOOLS
Endmills Taps
SOLID CARBIDE TOOLS
Endmills Micro Endmills Drill Mills
Chamfer Mills Drills Threadmills Burs
Reamers Threadmills Countersinks
HIGH SPEED STEEL TOOLS
Drills Taps & Dies Reamers
Endmills Countersinks
COBALT TOOLS
Drills Endmills Reamers
3
MMAADDEE IINN TTHHEE
INDEX
USA
PREMIUM SOLID CARBIDE pages 9 – 35
HP HIGH PERFORMANCE ENDMILLS
HP VI-PRO - Information Page 9
HP VI-PRO - Variable Index - 4 Flute - Stub & Regular Length - Square End - ALTIN & ALCRO-MAX 10
HP VI-PRO - Variable Index - 4 Flute - Long & Extra Long Length - Square End - ALTIN & ALCRO-MAX 11
HP VI-PRO - Variable Index - 4 Flute - Stub Length - Corner Radius - ALTIN & ALCRO-MAX 12
HP VI-PRO - Variable Index - 4 Flute - Regular Length - Corner Radius - ALTIN & ALCRO-MAX 13
HP VI-PRO - Variable Index - 4 Flute - Long Length - Corner Radius - ALTIN & ALCRO-MAX 14
HP VI-PRO - Variable Index - 4 Flute - Extra Long Length - Corner Radius - ALTIN & ALCRO-MAX 15
.
HP VI-PRO - Variable Index - 4 Flute - Stub & Regular Length - Ball Nose - ALTIN & ALCRO-MAX 16
HP VI-PRO - Variable Index - 4 Flute - Long & Extra Long Length - Ball Nose - ALTIN & ALCRO-MAX 17
HP VI-PRO - Variable Index - 5 Flute - Stub & Regular Length - Square End - ALTIN & ALCRO-MAX 18
HP VI-PRO - Variable Index - 5 Flute - Long & Extra Long Length - Square End - ALTIN & ALCRO-MAX 19
HP VI-PRO - Variable Index - 5 Flute - Stub Length - Corner Radius - ALTIN & ALCRO-MAX 20
HP VI-PRO - Variable Index - 5 Flute - Regular Length - Corner Radius - ALTIN & ALCRO-MAX 21
HP VI-PRO - Variable Index - 5 Flute - Long Length - Corner Radius - ALTIN & ALCRO-MAX 22
HP VI-PRO - Variable Index - 5 Flute - Extra Long Length - Corner Radius - ALTIN & ALCRO-MAX 23
HP TERMINATOR - 6 Flute - 40º - Regular Length - Square End & Corner Radius - ALTIN & ALCRO-MAX 24
HP TERMINATOR - 6 Flute - 40º - Long Length - Square End & Corner Radius - ALTIN & ALCRO-MAX 25
HP Fine Pitch Roughers - Stub, Regular & Long Length - 4 Flute - 30º - Uncoated & ALTIN 26 - 27
HP Rougher/Finisher - Regular Length - 4 Flute - 40º - Corner Radius - Uncoated & ALTIN 27
HP Regular Length - 3 Flute - 60º - Square End - Uncoated & ALTIN 28
HP Regular Length - 3 Flute - 60º - Corner Radius - Uncoated & ALTIN 28
HP Regular Length - 3 Flute - 45º - Square End - Uncoated & ALTIN 29
HP Regular Length - 3 Flute - 45º - Corner Radius - Uncoated & ALTIN 29
HP Stub Length - 5 Flute - 45º - Square End - Uncoated & ALTIN 30
HP Stub Length - 5 Flute - 45º - Corner Radius - Uncoated & ALTIN 30
HP Regular Length - 5 Flute - 45º - Square End - Uncoated & ALTIN 31
HP Regular Length - 5 Flute - 45º - Corner Radius - Uncoated & ALTIN 31
HP Regular Length - 2 Flute - 45º - For Aluminum - Uncoated & ZRN 32
HP Regular Length - 2 Flute - 45º - For Aluminum - Corner Radius - Uncoated & ZRN 32
HP Long Length - 2 Flute - 45º - For Aluminum - Square End - Uncoated & ZRN 33
HP Long Length - 2 Flute - 45º - For Aluminum - Corner Radius - Uncoated & ZRN 33
HP Regular Length - 3 Flute - 45º - For Aluminum - Square End - Uncoated & ZRN 34
HP Regular Length - 3 Flute - 45º - For Aluminum - Corner Radius - Uncoated & ZRN 34
HP Long Length - 3 Flute - 45º - For Aluminum - Square End - Uncoated & ZRN 35
HP Long Length - 3 Flute - 45º - For Aluminum - Corner Radius - Uncoated & ZRN 35
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
4 MADE IN THE USA
MMAADDEE IINN TTHHEE
INDEX
USA
PREMIUM SOLID CARBIDE pages 36 – 91
GENERAL PURPOSE ENDMILLS
SINGLE END
Regular Length - 4 Flute - Square End - Uncoated, ALTIN & TICN 36
Long & Extra Long Length - 4 Flute - Square End - Uncoated, ALTIN & TICN 37
Regular Length - 4 Flute - Ball Nose - Uncoated, ALTIN & TICN 38
Long & Extra Long Length - 4 Flute - Ball Nose - Uncoated, ALTIN & TICN 39
Regular Length - 2 Flute - Square End - Uncoated, ALTIN & TICN 40
Long & Extra Long Length - 2 Flute - Square End - Uncoated, ALTIN & TICN 41
Regular Length - 2 Flute - Ball Nose - Un.coated, ALTIN & TICN 42
Long & Extra Long Length - 2 Flute - Ball Nose - Uncoated, ALTIN & TICN 43
Regular Length - 2 Flute - Corner Radius - Uncoated 44
Regular Length - 2 Flute - Corner Radius - ALTIN 45
Regular Length - 4 Flute - Corner Radius - Uncoated 46
Regular Length - 4 Flute - Corner Radius - ALTIN 47
Long Length - 4 Flute - Corner Radius - Uncoated 48
Long Length - 4 Flute - Corner Radius - ALTIN 49
Extra Long Length - 4 Flute - Corner Radius - Uncoated 50
Extra Long Length - 4 Flute - Corner Radius - ALTIN 51
Regular Length - Metric - 4 Flute - Square End - Uncoated & ALTIN 52
Stub Length - 2 Flute & 4 Flute - Square End & Ball Nose - Uncoated & ALTIN 53
GENERAL PURPOSE ENDMILLS
DOUBLE END
Stub Length - 2 Flute & 4 Flute - Square End & Ball Nose - Uncoated & ALTIN 54
Regular Length - 2 Flute & 4 Flute - Square End & Ball Nose - Uncoated & ALTIN 55
MICRO ENDMILLS
2 Flute - Square End & Ball Nose - Uncoated & ALTIN 56 - 57
4 Flute - Square End & Ball Nose - Uncoated & ALTIN 58 - 59
2 Flute - Stub Flute - Square End & Ball Nose - Uncoated & ALTIN 60
4 Flute - Stub Flute - Square End & Ball Nose - Uncoated & ALTIN 61
4 Flute - Stub Flute - Corner Radius - Uncoated & ALTIN 62
4 Flute - Corner Radius - Uncoated & ALTIN 63
THREADMILLS
Internal/External Threads - UN Threads & NPT Pipe Threads - ALTIN 64
Internal/External Threads - NPTF Pipe Threads & Metric Threads - ALTIN 65
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
MADE IN THE USA 5
MMAADDEE IINN TTHHEE
INDEX
USA
PREMIUM SOLID CARBIDE pages 36 – 91
DRILL MILLS
2 & 4 Flute - 60º Point - Uncoated & ALTIN 66 - 67
2 & 4 Flute - 90º Point - Uncoated & ALTIN 68 - 69
CHAMFER MILLS
Single End - 2 & 4 Flute - 60º, 82º, 90º, 100º, 120º Point - Uncoated & ALTIN 70
Double End - 2 & 4 Flute - 60º, 82º, 90º, 100º, 120º Point - Uncoated & ALTIN 71
CARBIDE DRILLS
N/C Spotting - 90º, 120º & 140º - Uncoated & ALTIN 72 - 73
Jobber Length - 118º Split Point - Frac.tional, Letter, Wire & Metric Sizes - Uncoated & ALTIN 74 - 75
Stub Length - 135º Split Point - Fractional, Letter & Wire Sizes - Uncoated & ALTIN 76 - 77
Straight Flute - 140º Split Point - Fractional, Letter & Wire Sizes - Uncoated & ALTIN 78 - 79
CARBIDE REAMERS
Straight Flute - Fractional, Wire, Letter, Metric & Decimal 80 - 84
Special Sizes - Quantity Pricing 85
BURS
Cylindrical SA • Cylindrical End Cut SB 86
Cylindrical Ball Nose SC • Egg Shape SE 87
Ball Shape SD • Pointed Tree SG 88
Round Nose Tree SF • Flame Shape SH 89
Included Angle SJ • SK • SL 90
Pointed Cone SM • Inverted Taper SN • Bur Sets 91
COUNTERSINKS pages 92 – 95
Single Flute, 3 Flute & 6 Flute - Solid Carbide - 60º, 82º, 90º & 100º 92
Combined Drill & Countersinks - Solid Carbide 60º • HSS 60º • M42 Cobalt 60º 93
Combined Drill & Countersinks - HSS - Long Length 60º • Bell Type 60º 94
Combined Drill & Countersinks - HSS • Four Flute Machine • Single Flute 95
ENDMILLS – HSS & M42 COBALT pages 96 – 103
Single End - 2 Flute, 4 Flute & 6 Flute - Square End - 30º Helix - HSS - Uncoated & ALTIN 96 - 97
Double End - 2 Flute & 4 Flute - Square End - 30º Helix - HSS - Uncoated & ALTIN 98 - 99
Single End - 2 Flute, 4 Flute & 6 Flute - Square End - 30º Helix - M42 Cobalt - Uncoated & ALTIN 100 - 101
Double End - 2 Flute & 4 Flute - Square End - 30º Helix - M42 Cobalt - Uncoated & ALTIN 102
Roughing - Coarse & Fine Pitch - M42 Cobalt - Uncoated & ALTIN 103
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
6 MADE IN THE USA
MMAADDEE IINN TTHHEE
INDEX
USA
TAPS & DIES pages 104 – 132
HP HIGH PERFORMANCE TAPS
HIGH VANADIUM POWDERED METAL
HP PREDATOR - Spiral Point - Uncoated, Steam Oxide & ALTIN 104
HP PREDATOR - Metric - Spiral Point - Uncoated, Steam Oxide & ALTIN 105
HP PREDATOR - Spiral Flute Semi Bottoming - Uncoated, Steam Oxide & ALTIN 106
HP PREDATOR - Metric - Spiral Flute Semi Bottoming - Uncoated, Steam Oxide & ALTIN 107
GENERAL PURPOSE GROUND THREAD TAPS
Hand - Taper, Plug, Bottom & Sets - HSS 108 - 111
.
Hand - Taper, Plug & Bottom - HSS - Steam Oxide 112
Hand - Plug & Bottom - HSS - Nitride & Steam Oxide 113
Hand - Taper, Plug, Bottom & Sets - HSS - TIN 114
Hand - Metric - Taper, Plug, Bottom & Sets - HSS - Uncoated 115
Hand - Metric - Taper, Plug, Bottom & Sets - HSS - TIN 116
Spiral Point Plug - HSS 117
Spiral Point Plug - HSS - Steam Oxide, Nitride & Steam Oxide 118
Spiral Point Plug - HSS - TIN & ALTIN 119
Spiral Point Plug - Metric - HSS - Uncoated & TIN 120
Spiral Point Bottoming - HSS - Uncoated & TIN 120
Hi Spiral Flute Semi Bottoming - HSS 121
Hi Spiral Flute Semi Bottoming - Metric - HSS 121
Thread Forming - Plug & Bottom - HSS 122
Thread Forming - Metric - Plug & Bottom - HSS 122
Thread Forming - Plug & Bottom - HSS - TIN 123
Thread Forming - Metric - Plug & Bottom - HSS - TIN 123
Combination Drill & Tap - HSS 124
Combination Drill & Tap - Metric - HSS 124
Taper Pipe NPT • Taper Pipe NPT Interrupted - HSS - Uncoated, Steam Oxide & TIN 125
Taper Pipe NPTF • Taper Pipe NPTF Interrupted - HSS - Uncoated & TIN 126
Straight Pipe NPS • NPT Extension Taper Pipe - HSS - Uncoated & TIN 127
STI - Screw Thread Insert • +.005 Oversize - HSS 128
Pulley - Plug • Small Shank Extension - Spiral Point Plug - HSS 129
DIES
Adjustable Round Split - HSS • Die Stocks 130
Adjustable Round Split • Hexagon Rethreading - Carbon Steel 131
NPT Hexagon Rethreading • Metric Hexagon Rethreading - Carbon Steel 132
T-Handle Tap Wrenches 132
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
MADE IN THE USA 7
MMAADDEE IINN TTHHEE
INDEX
USA
DRILLS – HSS & M42 COBALT pages 133 – 155
Drill Sets 133 - 135
Jobber Length - 118º Point - HSS - Bright, TIN & Oxided 136 - 138
Jobber Length - Metric - 118º Point - HSS - Oxided 139
Jobber Length - Heavy Duty - 135º Split Point - HSS - Oxided & Black/Gold 140 - 141
Mechanics Length - Heavy Duty - 135º Split Point - Black/Gold - Flatted Shank - HSS 142
Screw Machine Length - Heavy Duty - 135º Split Point - HSS - Oxided 143
Taper Length - 118º Point - HSS - Oxided 144
Taper Shank - 118º Point - HSS - Oxided 145
Screw Machine Length - Heavy Duty -. 135º Split Point - M42 Cobalt - Straw Finish & ALTIN 146 - 147
Jobber Length - Heavy Duty - 135º Split Point - M42 Cobalt - Straw Finish & ALTIN 148 - 149
Silver & Deming - HSS, Cobalt & Black/Gold 150 - 151
Aircraft Extension - 6" & 12" Overall Length - HSS & M42 Cobalt 152 - 153
Extra Length - 12" Overall Length - HSS - Bright 154
Reduced Shank - 1/4" & 3/8" - 118º Point - HSS - Oxided 154
Screw Extractors • Drill Drifts - HSS - Oxided 155
REAMERS – HSS & M42 COBALT pages 156 – 176
Chucking - Straight Shank - Straight Flute - HSS & M42 Cobalt 156 - 161
Chucking - Intermediate Sizes - HSS Only 162 - 163
Chucking - Straight Shank - Straight Flute - Special Sizes - HSS & M42 Cobalt 164 - 165
Chucking - Straight Shank - Right Hand Spiral - Right Hand Cut - HSS & M42 Cobalt 166 - 169
Dowel Pin Sizes - HSS & M42 Cobalt 170
Taper Shank - Straight Flute - HSS 170
Expansion - HSS 171
Hand - Straight Shank - Straight Flute & Left Hand Spiral - Right Hand Cut - HSS 172
Taper Pipe • Taper Pin - HSS 173
Capscrew Counterbores - HSS 174
Construction - Black/Gold • Safety Reamers • Bridge Reamers - HSS 175
Reamer Sets - HSS & M42 Cobalt 176
TECHNICAL INFORMATION pages 177 – 192
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
8 MADE IN THE USA