TECHNICAL DATA INDEX FROM FOR LOUVERS D o o r P r o d u c t s 4958 Stout Dr. #119, San Antonio, TX 78219 PH: 210.662.6300 • FAX: 210.662.2828 e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING MODEL DESCRIPTION DATE PRINTED PAGE AFDL . . . . . . . . . . . . . . . . . . . . . . . . . . Inverted "Y". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . March 2012 . . . . . . . . . . . . 1 AFDL-N. . . . . . . . . . . . . . . . . . . . . . . . Expandable 1-1/2" to 1-3/4". . . . . . . . . . . . . . . . . . . . . . . August 2016. . . . . . . . . . . . 2 AFDL-W. . . . . . . . . . . . . . . . . . . . . . . . Expandable 1-3/4" to 2-1/8". . . . . . . . . . . . . . . . . . . . . . . August 2016. . . . . . . . . . . . 3 AFDL-W1 . . . . . . . . . . . . . . . . . . . . . . Expandable 2-1/8" to 2-9/16". . . . . . . . . . . . . . . . . . . . . . August 2016. . . . . . . . . . . . 4 FDLS . . . . . . . . . . . . . . . . . . . . . . . . . . Inverted Split "Y". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . March 2012 . . . . . . . . . . . . 5 FLDL. . . . . . . . . . . . . . . . . . . . . . . . . . . Fusible Link - Self Attaching . . . . . . . . . . . . . . . . . . . . . . . May 2014 . . . . . . . . . . . . . 6 FLDL-W. . . . . . . . . . . . . . . . . . . . . . . . Expandable 1-3/4" to 2-1/8". . . . . . . . . . . . . . . . . . . . . . . . May 2017 . . . . . . . . . . . . . 7 FLDL-W1. . . . . . . . . . . . . . . . . . . . . . . Expandable 2-1/8" to 2-9/16" . . . . . . . . . . . . . . . . . . . . November 2016. . . . . . . . . . . 8 ADL. . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjustable "Z" Blade - Self Attaching. . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . . 9 CHDL . . . . . . . . . . . . . . . . . . . . . . . . . . Inverted "V" - Core Only. . . . . . . . . . . . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 10 CHDL-1F. . . . . . . . . . . . . . . . . . . . . . . Inverted "V" - Core with Frame one side only . . . . . . . . . . July 2011 . . . . . . . . . . . . 11 CHDL-2F. . . . . . . . . . . . . . . . . . . . . . . Inverted "V" - Core with Frame both sides. . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 12 DRDL . . . . . . . . . . . . . . . . . . . . . . . . . . Dark room, Double Inverted "V". . . . . . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 13 SRDL . . . . . . . . . . . . . . . . . . . . . . . . . . Storm Proof Louver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . August 2012. . . . . . . . . . . 14 SRDL . . . . . . . . . . . . . . . . . . . . . . . . . . Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 15 FPL-1 . . . . . . . . . . . . . . . . . . . . . . . . . . Fixed Position Self Attaching "Z" Blade . . . . . . . . . . . . November 2011. . . . . . . . . . 16 FPL-2 . . . . . . . . . . . . . . . . . . . . . . . . . . Fixed Position Thru-Bolted "Z" Blade. . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 17 Screens for Louvers . . . . . . . . . . . Attached. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 18 Screens for Louvers . . . . . . . . . . . Framed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 19 Fasteners for Louvers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . July 2011 . . . . . . . . . . . . 20 Sizing Wall & Door Louvers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . July 2011. . . . . . . . . . 21-23 MAY 2017 LOUVERS INDEX PAGE A Technical DaTa AFDL From inverTeD Y non-viSion loUver AFDL-T D o o r P r o d u c t s TranSom loUver core onlY 4958 Stout Dr. #119, San Antonio, TX 78219 PH: 210.662.6300 • FAX: 210.662.2828 noT Fire raTeD e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING 1 3/4" (44mm) 3/16" 3/16" OR SPECIFY FOR USE IN TRANSOMS (5mm) (5mm) SIDELITES OR BORROWED LITES. 1 1/8" (29mm) FRAME O.D. 1-1/8" mm) (219-1m/8m") APCATNUEALL (C29OmRmE) 4" (6 7/16" SIZE DIMENSION ZE PLUS 7/8" (22mm) CODUSROTI&DZOOEERURT RDER SIZE MINUS 1/ (11mm) OOPSREI&DZNEEINRG ZE MINUS 1/4" (6mm) TLROA1U"NVSEORM SI O 1" SI (25mm) R (25mm) R E E D D R R O O ± OUTSIDE INSIDE Anemostat manufacturing dimensions 1/32 (1mm) AFDL AFDL-T Actual dimensions are nominal and may vary based on component manufacturers tolerances. STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 18 GA. (1.2mm) Cold Rolled Steel - Frame. MATERIAL: #304 or #316 Stainless Steel, #4 Finish(Satin), Galvanized (Coil, 22 GA. (.75mm) Cold Rolled Steel - Louver Blades. Hot Dipped or Zinc Plated), Mill Finish or Anodized Aluminum FINISH: Grey Primer, Beige or Bronze Baked Enamel. (#5052 Alloy), 16 gauge (1.5mm) Cold Rolled Steel or Stainless Steel. INSTALLATION: Our top selling louver is preferred because of FINISH: Custom Baked Enamel Colors (as per sample paint chip, its ease of installation. Use #8x1" (25mm) phillips screw supplied by customer). that fastens auxiliary frame to the louver core, FASTENERS: Special Security Screw Fasteners, See Page 14, this section. thru the cutout in the door, thus eliminating SPECIALS: Fractional sizes (frame dimension is increased to the need to drill holes in the door for thru bolts. accomodate odd size). This method saves time and installation labor and Mesh insect screens are loose, attached or framed. leaves the corridor side of the frame free of (Galvanized, Aluminum, Charcoal Aluminum, Stainless Steel.) fasteners for added security, For detail drawings see pages 12 and 13 this section. and a cleaner aesthetic appearance. DOOR THICKNESS: For 1 3/4" (44mm) Door 1-3/8"(35mm), 2" (50mm) and FIRE RATINGS 2 1/8" (54mm) are available. Louver core may be offset. AESTHETICS: Tight mitered corners, no visible welds, countersunk AFDL and AFDL-T are not fire rated. mounting holes and corridor side of frame free of fasteners make for a clean, streamlined appearance NOTE: USES: Anywhere air flow is required thru a door. For Exterior use, High Humidity or Salt Air application, FREE AIR FLOW: 50% Free Area. product must be Galvanized or Stainless Steel. Job name & location Submitted by march 2012 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 1 Technical DaTa AFDL-N From 38 mmto44 mm (1-1/2" to 1-3/4") EXPANDABLE D o o r P r o d u c t s inverTeD Y non-viSion loUvre 4958 Stout Dr. #119, San Antonio, TX 78219 PH: 210.662.6300 • FAX: 210.662.2828 noT Fire raTeD e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING 38 mm (1-1/2") 5 mm to 5 mm (13/16) 44 mm (1-3/4") (13/16) 29 mm (1-1/8") FRAME O.D. 25 mm (1") 4") 1/ 7/8")ORDER 6 mm ( 1(71/ 1m6m") mm ( SI&ZE NUS S 22 DOOR E MI UCUTOUT Z L SI SIZE P RDER 25 mm R O (1") E D R O ± Anemostat manufacturing dimensions 0.8mm Actual dimensions are nominal and may vary based on component manufacturers tolerances. EXT. INT. STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 1.2 mm (18 GA) Galvanised Steel - Frame. MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanised .75 mm (22 GA) Galvanised Steel - Louver Blades. (Hot Dipped or Zinc Plated), Mill Finish or Anodized Aluminum FINISH: RAL 9006 Silver Baked Enamel, Gray Primer, Beige or (#5052 Alloy), 16 gauge Cold Rolled Steel or Stainless Steel. Bronze Baked Enamel FINISH: Custom Baked Enamel Colors (as per sample paint chip, supplied by customer). INSTALLATION: Our top selling louver is preferred because of its ease of installation. Use #8 x 25mm (1") FASTENERS: Special Security Screw Fasteners phillips screw that fastens auxiliary frame to the SPECIALS: Odd sizes (frame dimension is increased to accomodate odd size). louver core, thru the cutout in the door, thus Height dimension must be in even inches, 1" (25.4mm) eliminating the need to drill holes in the door. Mesh insect screens are loose, attached or framed. This method saves time and installation labor and (Galvanized, Aluminum, Charcoal Aluminum, Stainless Steel.) leaves the corridor side of the frame free of fasteners for added security, FIRE RATINGS and a cleaner aesthetic appearance. DOOR THICKNESS: Expandable from 38 mm (1-1/2") to 44 mm (1-3/4") AFDL-N is not fire rated. Metal or Wood Doors AESTHETICS: Tight mitered corners, no visible welds, countersunk NOTE: For Exterior use, High Humidity or Salt Air application, mounting holes and corridor side of frame free of product must be Galvanized or Stainless Steel. fasteners make for a clean, streamlined appearance USES: Anywhere air flow is required thru a door. FREE AIR FLOW: 50% Free Area. Job name & location Submitted by aUgUST 2016 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 2 Technical DaTa AFDL-W From 45 mmto55 mm (1-3/4" to 2-1/8") EXPANDABLE D o o r P r o d u c t s inverTeD Y non-viSion loUvre 4958 Stout Dr. #119, San Antonio, TX 78219 PH: 210.662.6300 • FAX: 210.662.2828 noT Fire raTeD e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING 45 mm (1-3/4") 55 mmmm to 5 mm (13/16) 55 mm (2-1/8") (13/16) 29 mm (1-1/8") FRAME 14 mm O.D. (9/16") 4") 1/ 8")ORDER mm ( 25(1 m")m mm (7/ SI&ZE NUS 6 11 mm US 22 CDUOTOORUT ZE MI (7/16") L SI SIZE P RDER 25 mm R O (1") E D R O ± Anemostat manufacturing dimensions 0.8mm Actual dimensions are nominal and may vary EXT. INT. based on component manufacturers tolerances. STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 1.2 mm (18 GA) Galvanised Steel - Frame. MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanised .75 mm (22 GA) Galvanised Steel - Louver Blades. (Hot Dipped or Zinc Plated), Mill Finish or Anodized Aluminum FINISH: RAL 9006 Silver Baked Enamel, Gray Primer, Beige or (#5052 Alloy), 16 gauge Cold Rolled Steel or Stainless Steel. Bronze Baked Enamel FINISH: Custom Baked Enamel Colors (as per sample paint chip, INSTALLATION: Our top selling louver is preferred because of its supplied by customer). ease of installation. Use #8 x 25mm (1") or FASTENERS: Special Security Screw Fasteners 38mm (1-1/2") phillips screw that fastens auxiliary frame to the louver core, thru the cutout in the door, SPECIALS: Odd sizes (frame dimension is increased to accomodate odd size). thus eliminating the need to drill holes in the door. Height dimension must be in even inches, 1" (25.4mm) This method saves time and installation labor and Mesh insect screens are loose, attached or framed. leaves the corridor side of the frame free of (Galvanized, Aluminum, Charcoal Aluminum, Stainless Steel.) fasteners for added security, and a cleaner aesthetic appearance. FIRE RATINGS DOOR THICKNESS: Expandable from 45 mm (1-3/4") to 55 mm (2-1/8") AFDL-W is not fire rated. Metal or Wood Doors AESTHETICS: Tight mitered corners, no visible welds, countersunk NOTE: mounting holes and corridor side of frame free of For Exterior use, High Humidity or Salt Air application, fasteners make for a clean, streamlined appearance product must be Galvanized or Stainless Steel. USES: Anywhere air flow is required thru a door. FREE AIR FLOW: 50% Free Area. Job name & location Submitted by aUgUST 2016 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 3 Technical DaTa AFDL-W1 From 55 mmto65 mm (2-1/8" to 2-9/16") EXPANDABLE D o o r P r o d u c t s inverTeD Y non-viSion loUvre 4958 Stout Dr. #119, San Antonio, TX 78219 PH: 210.662.6300 • FAX: 210.662.2828 noT Fire raTeD e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING 5 mm 55 mm to 65 mm 5 mm (13/16) (2-1/8" to 2-9/16") (13/16) 29 mm (1-1/8") FRAME 14 mm O.D. (9/16") 4") 25 mm 1/ (1") 8")ORDER mm ( 1(71/ 1m6m") mm (7/ SI&ZE NUS 6 US 22 CDUOTOORUT ZE MI L SI R SIZE P ORDER 25(1 m")m E D R O 25 mm (1") ± Anemostat manufacturing dimensions 0.8mm EXT. INT. Actual dimensions are nominal and may vary based on component manufacturers tolerances. STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 1.2 mm (18 GA) Galvanised Steel - Frame. MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanised .75 mm (22 GA) Galvanised Steel - Louver Blades. (Hot Dipped or Zinc Plated), Mill Finish or Anodized Aluminum FINISH: RAL 9006 Silver Baked Enamel, Gray Primer, Beige or (#5052 Alloy), 16 gauge Cold Rolled Steel or Stainless Steel. Bronze Baked Enamel FINISH: Custom Baked Enamel Colors (as per sample paint chip, INSTALLATION: Our top selling louver is preferred because of its supplied by customer). ease of installation. Use #8 x 38mm (1-1/2") or FASTENERS: Special Security Screw Fasteners 44mm (1-3/4") phillips screw that fastens auxiliary frame to the louver core, thru the cutout in the door, SPECIALS: Odd sizes (frame dimension is increased to accomodate odd size). thus eliminating the need to drill holes in the door. Height dimension must be in even inches, 1" (25.4mm) This method saves time and installation labor and Mesh insect screens are loose, attached or framed. leaves the corridor side of the frame free of (Galvanized, Aluminum, Charcoal Aluminum, Stainless Steel.) fasteners for added security, and a cleaner aesthetic appearance. FIRE RATINGS DOOR THICKNESS: Expandable from 55 mm (2-1/8") to 65 mm (2-9/16") AFDL-W1 is not fire rated. Metal or Wood Doors AESTHETICS: Tight mitered corners, no visible welds, countersunk NOTE: mounting holes and corridor side of frame free of For Exterior use, High Humidity or Salt Air application, fasteners make for a clean, streamlined appearance product must be Galvanized or Stainless Steel. USES: Anywhere air flow is required thru a door. FREE AIR FLOW: 50% Free Area. Job name & location Submitted by aUgUST 2016 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 4 Technical DaTa FDLS From inverTeD SPliT Y non-viSion loUver D o o r P r o d u c t s noT Fire raTeD 4958 Stout Dr. #119, San Antonio, TX 78219 PH: 210.662.6300 • FAX: 210.662.2828 e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING 3/16" 1 1/8" 3/16" (5mm) (29mm) (5mm) MIN. 3/8" (10mm) FRAME O.D. m) m 3 m) ORDER 1/8" ( m S 4 SIZE U 1" 4" (4 & MIN (25mm) 3/ DOOR E S 1 CUTOUT SIZ U R E PL RDE Z O SI R E D R O 1 1/8" (29mm) OUTSIDE INSIDE ± Anemostat manufacturing dimensions 1/32 (1mm) Actual dimensions are nominal and may vary based on component manufacturers tolerances. STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 18 GA. (1.2mm) Cold Rolled Steel - Frame and Louver Blades. MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanized (Coil, FINISH: Grey Primer, Beige or Bronze Baked Enamel. Hot Dipped or Zinc Plated), Mill Finish or Anodized Aluminum (#5052 Alloy). INSTALLATION: Fastens to door by means of #8x3/4" (19mm) sheet FINISH: Custom Baked Enamel Colors (as per sample chip, metal or wood screws, directly into the door, supplied by customer). thru countersunk mounting holes. FASTENERS: Special Security Screw Fasteners, See Page 14, this section. DOOR THICKNESS: Will fit any door thickness 1 1/8" (29mm) and over. SPECIALS: Fractional sizes (frame dimension is increased to AESTHETICS: Tight mitered corners, no visible welds, and accomodate odd size). countersunk mounting holes make for a versatile, Mesh insect screens are loose, attached or framed. easy to use Louver. (Galvanized, Aluminum, Charcoal Aluminum, Stainless Steel.) USES: Anywhere air flow is required thru a door. For detail drawings see pages 12 & 13, this section. FREE AIR FLOW: 50% Free Area. FIRE RATINGS FDLS is not fire rated. NOTE: For Exterior use, High Humidity or Salt Air application, product must be Galvanized or Stainless Steel. Job name & location Submitted by march 2012 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 5 Technical DaTa FLDL From Fire raTeD FUSible linK loUver Fire D o o r P r o d u c t s raTingS B.S.-476.22 4958 Stout Dr. #119, San Antonio, TX 78219 british Standard PH: 210.662.6300 • FAX: 210.662.2828 UnDerWriTerS’ laboraTorieS BSEN-1634-1 e-mail: [email protected] • website: www.anemostat.com FILE #R7776 Fire resistance DETAIL DRAWING ORDER SIZE MINUS 3/8" (10mm) 1 3/4" (44mm) 3/16" or up to 3/16" UP TO2 1/2" 64mm) (5mm) (624 1m/2m") (5mm) ( m) m 165° F (74° C) 2 F&U HSEIBALTE S LLIONTK STOP 7/8" (2 AT TOP BLADE S m) LU SPRING CLIP 3m E P STRAIVINELTESSS S 1/8" ( OSRIDZEER ER SIZ 1" NU & RD (25mm) MI DOOR O ZE CUTOUT SI R E D R O O.D. OPERATING FRAME LEVER (ALWAYS ON LOWER RIGHT ± HAND SIDE) Anemostat manufacturing dimensions 1/32 (1mm) Actual dimensions are nominal and may vary based on component manufacturers tolerances. INSIDE OUTSIDE STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 18 GA. (1.2mm) Cold Rolled Steel Frame and Louver Blades, MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanised 16 GA. (1.5mm) inner support members. (Zinc Plated). Not available in Hot Dipped or Aluminum. FINISH: Grey Primer, Beige or Bronze Baked Enamel. FINISH: Custom Baked Enamel Colors (as per sample chip supplied by customer). INSTALLATION: Self attaching using #8 x 1" (25mm) phillips head FASTENERS: Special security screw fasteners, See page 14, this section. screws that fasten the auxiliary frame to the louver SPECIALS: Fractional sizes not available. Height must be in even inches, 1" (25.4mm) core, thru the cut out in the door. The corridor side SCREENS: 18-14 mesh insert screens, framed or attached. (Galvanized, of the frame is free of fasteners for added security. Aluminum, Charcoal Aluminum, Stainless Steel). For detail DOOR THICKNESS: 1-3/4" (44mm) Door is Standard. Also available up to drawings see pages 12 and 13, this section. FLDL-W: 1-3/4" to 2-1/8" (45mm to 54mm) FIRE RATINGS andTEST STANDARDS FLDL-W1: 2-1/8" to 2-9/16" (55mm to 65mm) UL 10C with Classification Markings 2 CLOSING ASSEMBLY: Stainless steel operating springs assure (cid:2) approved listing - 20/45/60/90 minutes proper action with the closing mechanism. max width 24" (610mm), max height 24" (610mm) min width 10" (254mm), min height 6" (152mm) FREE AIR FLOW: 40% Free Area. BSEN-1634-1:2008(Fire resistance) NOTE: For Exterior use, High Humidity or Salt Air application, product must be Galvanized or Stainless Steel. (cid:2) approved Testing - Timber Doors - *30 minutes (e-30) max width 24" (610mm), max height 24" (610mm) min width 10" (254mm), min height 6" (152mm). IMPORTANT: Interpretation of building and fire codes may vary. *must be used with Zero Plus intumescent aperture liner Consult with the local authority having jurisdiction in your area, to determine appropriate standards. BS 476.22 (cid:2) approved Testing - Steel Doors - 120 minutes (e-120) max width 24" (610mm), max height 24" (610mm) min width 10" (254mm), min height 6" (152mm) Job name & location Submitted by ocTober 2014 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 6 TECHNICAL DATA FLDL-W FROM EXPANDABLE FIRE RATED FUSIBLE LINK LOUVER D o o r P r o d u c t s FIRE RATINGS B.S.-476.22 4958 Stout Dr. #119, San Antonio, TX 78219 British Standard PH: 210.662.6300 • FAX: 210.662.2828 UNDERWRITERS’ BSEN-1634-1 LABORATORIES e-mail: [email protected] • website: www.anemostat.com Fire Resistance FILE #R7776 DETAIL DRAWING ORDER SIZE MINUS 10mm (3/8") 45mm (1-3/4") 3/4") 1/8") 5 mm to 5 mm m (1-tom (2- (3/16") 55mm (2-1/8") (3/16") m m 5 5 4 5 14 mm 8") (9/16") m (7/ STOP m 74° &C H(1E6A5T° FS)L FOSSUPTTSR AAIIIBTNN LTGLEOE CLSPLISNIPK 25 mm (1") BLADE NUS 3mm (1/8") OSRI&DZEER R SIZE PLUS 22 RIVETS MI DOOR DE ZE CUTOUT OR SI R E D R O TEST LEVER O.D. FRAME INT. EXT. STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 1.2 mm (18 GA) Galvanised Steel Frame and Louver Blades, MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanised 1.5 mm (16 GA) inner support members. (Zinc Plated). Not available in Hot Dipped or Aluminum. FINISH: RAL 9006 Silver Baked Enamel, Gray Primer, Beige or FINISH: Custom Baked Enamel Colors (as per sample chip supplied by customer). Bronze Baked Enamel FASTENERS: Special security screw fasteners INSTALLATION: Self attaching using #8 x 25mm (1") or 38mm (1-1/2") phillips head screws that fasten the auxiliary frame to SPECIALS: Fractional sizes not available. Height must be in even inches, 1" (25.4mm) the louver core, thru the cut out in the door. The corridor FIRE RATINGS side of the frame is free of fasteners for added security. UL 10C with Classification Markings DOOR THICKNESS: Expandable from 45mm (1-3/4") to 55mm (2-1/8") (cid:2) Approved Testing - 20/45/60/90 Minutes Metal or Wood Doors Max width 24" (610mm), max height 24" (610mm) Min width 10" (254mm), min height 6" (152mm) CLOSING ASSEMBLY: Stainless steel operating springs assure proper action with the closing mechanism. BSEN-1634-1:2008(Fire Resistance) B AESTHETICS: Tight mitered corners and countersunk mounting (cid:2) Approved Testing - Timber Doors - *60 minutes (E-60) Max width 24" (610mm), max height 24" (610mm) - min width 10" (254mm), min height 6" (152mm). holes make for a clean appearance. Min width 10" (254mm), min height 6" (152mm). FREE AIR FLOW: 40% Free Area. *Must be used with Zero Plus Intumescent Aperture Liner NOTE: For Exterior use, High Humidity or Salt Air application, BS 476.22 product must be Galvanized or Stainless Steel. (cid:2) Approved Testing - Steel Doors - 120 Minutes (E-120) IMPORTANT: Interpretation of building and fire codes may vary. Max width 24" (610mm), max height 24" (610mm) Consult with the local authority having jurisdiction in your area, Min width 10" (254mm), min height 6" (152mm) to determine appropriate standards. Job Name & Location Submitted by MAY 2017 For Most Current Info, Consult Factory or check our website, www.anemostat.com LOUVERS PAGE 7 Technical DaTa FLDL-W1 From EXPANDABLE Fire raTeD FUSible linK loUver D o o r P r o d u c t s Fire raTingS 4958 Stout Dr. #119, San Antonio, TX 78219 B.S.-476.22 EN-1634 PH: 210.662.6300 • FAX: 210.662.2828 british Standard integrity e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING ORDER SIZE MINUS 10mm (3/8") m (2-1/8")tom (2-9/16") (53 /m16m") 6555 m mmm t( o(22--91/1/86"")) (53 /m16m") BSLTAODPE m m 55 65 14 mm 8") (9/16") m (7/ 74° &C H(1E6A5T° FS)L FOUTS AIBT LTEO LPINK m (1/8") US 22m SSPTRRAIIIVNNEGLTE SCSLSIP 25 mm (1") E MINUS 3m ODSROI&DZOEERR DER SIZE PL SIZ CUTOUT OR R E TEST LEVER D R O 25 mm (1") O.D. FRAME ± Anemostat manufacturing dimensions 0.8mm INT. EXT. Actual dimensions are nominal and may vary based on component manufacturers tolerances. STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 1.2 mm (18 GA) Galvanised Steel Frame and Louver Blades, MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanised 1.5 mm (16 GA) inner support members. (Zinc Plated). Not available in Hot Dipped or Aluminum. FINISH: RAL 9006 Silver Baked Enamel, Gray Primer, Beige or FINISH: Custom Baked Enamel Colors (as per sample chip supplied by customer). Bronze Baked Enamel FASTENERS: Special security screw fasteners INSTALLATION: Self attaching using #8 x 38mm (1-1/2") or 45mm (1-3/4") phillips head screws that fasten the SPECIALS: Fractional sizes not available. auxiliary frame to the louver core, thru the cut out FIRE RATINGS in the door. The corridor side of the frame is free of fasteners for added security. BS 476.22 DOOR THICKNESS: Expandable from 55mm (2-1/8") to 65mm (2-1/2") (cid:2) approved Testing - Steel Doors - 120 minutes (e-120) Metal or Wood Doors max width 24" (610mm), max height 24" (610mm) CLOSING ASSEMBLY: Stainless steel operating springs assure min width 10" (254mm), min height 6" (152mm) proper action with the closing mechanism. AESTHETICS: Tight mitered corners and countersunk mounting EN-1634 - Integrity Only holes make for a clean appearance. (cid:2) approved Testing - Steel Doors - 90 minutes (e-90) max width 32" (813mm), max height 32" (813mm) FREE AIR FLOW: 40% Free Area. min width 10" (254mm), min height 6" (152mm) IMPORTANT: Interpretation of building and fire codes may vary. Consult with the local authority having jurisdiction in your area, to determine appropriate standards. NOTE: For Exterior use, High Humidity or Salt Air application, product must be Galvanized or Stainless Steel. Job name & location Submitted by november 2016 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 8 Technical DaTa ADL From “Z” blaDe oPeraTing loUver D o o r P r o d u c t s noT Fire raTeD 4958 Stout Dr. #119, San Antonio, TX 78219 PH: 210.662.6300 • FAX: 210.662.2828 e-mail: [email protected] • website: www.anemostat.com DETAIL DRAWING 3/16" 1 3/4" 3/16" (5mm) (44mm) (5mm) m) m 2 2 8" ( SPRING CLIP BSLTAODPE mm) US 7/ STRAIVINELTESSS 1/8" (3 ZE PL S ORDER SI (251m"m) ZE MINU DSOI&ZOER ORDER SI R CUTOUT E D R O O.D. OPERATING FRAME FINGER PULL (ALWAYS ON LOWER RIGHT HAND SIDE) INSIDE OUTSIDE STANDARD PRODUCT FEATURES OPTIONAL FEATURES MATERIAL: 18 GA. Cold Rolled Steel Frame and Louver Blades, MATERIAL: #304 or #316 Stainless Steel, #4 Finish (Satin), Galvanized (Coil 16 GA. inner support members. or Zinc Plated). Not available in Hot Dipped or Aluminum. FINISH: Grey Primer, Beige or Bronze Baked Enamel. FINISH: Custom Baked Enamel Colors (as per sample chip supplied by customer). INSTALLATION: Self attaching using #8 x 1" phillips head FASTENERS: Special Security Screw Fasteners, See Page 14, this section. screws that fasten the auxiliary frame to the louver core, thru the cutout in the door. The corridor side SPECIALS: Fractional sizes not available. of the frame is free of fasteners for added security. 18-14 mesh insert screens, framed or attached. (Galvanized, Aluminum, Charcoal Aluminum, Stainless Steel). For detail DOOR THICKNESS: For 1 3/4" Door (available for 1 3/8" Doors). drawings see pages 12 and 13, this section. AESTHETICS: Tight mitered corners and countersunk mounting holes make for a clean appearance. USES: Where an operating louver without a fire rating is required. FIRE RATINGS FREE AIR FLOW: 40% Free Area. MAX. 1 PIECE CONSTRUCTION: 32" w x 36" h. Larger sizes constructed ADL is not fire rated. of 2 or more ADL units mulled or stacked NOTE: For Exterior use, High Humidity or Salt Air application, product must be Galvanized or Stainless Steel. Job name & location Submitted by march 2015 For Most Current Info, Consult Factory or check our website, www.anemostat.com loUverS Page 9
Description: