ebook img

Experimental Mechanics 2001: Vol 41 Index PDF

5 Pages·2001·0.98 MB·English
by  
Save to my drive
Quick download
Download
Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.

Preview Experimental Mechanics 2001: Vol 41 Index

Index to EXPERIMENTAL MECHANICS Volume 41, 2001 TITLE INDEX Accelerometer Spiking Under Cryogenic Conditions—S. J. DiMaggio, Z. Force and Shapes of Liquid Bridges Between Circular Pads—M. A. H. Duron and S. Rubin, 174-181 (June). Verges, M. C. Larson and R. Bacou, 351-357 (Dec.). Accurate Integration of Surface Profile Data with Quantitative Error A Force-based Failure Criterion for Spot Weld Design—P. Wung, Analysis—N. Li, P. Cheng, M. A. Sutton, S. R. McNeill and Y. J. 107-113 (Mar ). Chao, 77-83 (Mar ). Hybrid Experimental-numerical Concept of Residual Stress Analysis in Acoustic Emission Monitoring of Carbon-fiber-reinforced-polymer Laser Weldments—D. Holstein, L. Salbut, M. Kujawinska and W. Bridge Stay Cables in Large-scale Testing—P. Rizzo and F. Lanza di Jiiptner, 343-350 (Dec.). Scalea, 282-290 (Sept.). Hybrid Stress Analysis of Perforated Composites Using Strain Gages—T. Acoustoelastic Determination of Residual Stress with Laser Doppler H. Baek and R. E. Rowlands, 195-203 (June). Velocimetry—L. F. He and S. Kobayashi, 190-194 (June). Hygric Characterization of Composites Using an Antisymmetric Advances in Scanning Electron Microscope Moire—H. Chen and D. Liu, Cross-ply Specimen—C.-L. Tsai, S.-C. Wooh, S.-F. Hwang and Y. 165-173 (June). Du, 270-276 (Sept.). Analysis of Strain Localization During Tensile Tests by Digital Image Hygric Characterization of Woven Glass/Epoxy Composites—C.-L. Tsai Correlation—B. Wattrisse, A. Chrysochoos, J.-M. Muracciole and M. and S.-C. Wooh, 70-76 (Mar.). Nemoz-Gaillard, 29-39 (Mar). Investigation of Displacement Fields in an Abrasive Wateijet Drilling Pro¬ Brittle Fracture: Variation of Fracture Toughness with Constraint and cess: Part 1. Experimental Measurements—Z. Guo and M. Ramulu, Crack Curving Under Mode I Conditions—Y. J. Chao, S. Liu and B. 375-387 (Dec.). J. Broviak, 232-241 (Sept.). Investigation of Displacement Fields in an Abrasive Waterjet Dniling Pro¬ Buckling Investigations on a Nuclear Reactor Inner Vessel Model— cess: Part 2. Numerical Analysis—Z. Guo and M. Ramulu, 388-402 M.R.S.C. Bose, G. Thomas, R, Palaninathan, S. P. Damodaran and P. (Dec.). Chellapandi, 144-150 (June). Measurement of Coatings’ Elastic Properties by Mechanical Methods: Composite Specimen Bearing Failure Reduction in losipescu Shear Part 1. Experimental Errors—M. Beghini, L. Bertini and F. Frsndo, Tests—B. W. Tew, E. M. Odom and J. D. Teel, 218-224 (Sept.). 293-304 (Dec ). Crack-opening Interferometry at Interfaces of Transparent Materials and Measurement of Coatings’ Elastic Properties by Mechanical Methods: Metals—J. W. Kysar, 52-57 (Mar). Part 2 Application to Thermal Barrier Coatings—M. Beghini, G. Development and Assessment of a Single-image Fringe Projection Benamati, L. Bertini and F. Frendo, 305-311 (Dec.). Method for Dynamic Applications—M. A Sutton, W. Zhao, S. R. Measurement of Steering Gear Impedance—M. S. Qatu, D. R. Llewellyn McNeill, H. W. Schreier and Y. J. Chao, 205-217 (Sept ). and W. G. Spadafora, 151-156 (June). Development of High-temperature Microsample Testing—M. Zupan, M. A Method for Measuring the Creep Behavior of Pressurized Polymer J. Hayden, C. J. Boehlert and K. J. Hemker, 242-247 (Sept.). Tubing—C. Wu, S. C. Mantell and J. H. Davidson, 368-374 (Dec.). Effect of Plastic Zone on the Fatigue Crack Propagation Behavior Be¬ A New Moire Interferometer for Measuring In-plane Displacement—S. T. tween Two Fatigue Cracks—S.-H. Song and B.-H. Choi, 225-231 Lin, 140-143 (June). (Sept.). Nonlinear Behavior of Composite Sandwich Beams in Three-point Electronic Speckle Pattern Interferometry Analysis of Tensile Tests of Bending—E. E. Gdoutos, 1. M. Daniel, K.-A. Wang and J. L. Abot, Semihard Copper Sheets—C. Vial-Edwards, I. Lira, A. Martinez and 182-189 (June). M. Miinzenmayer, 58-62 (Mar.). Photoelastic Experimental Hybrid Method for Fracture Mechanics of Embedded Optical Fiber Bragg Grating Sensor in a Nonuniform Strain Anisotropic Materials—J.-S. Hawong, D.-C. Shi i and H.-J. Lee, Field: Measurements and Simulations—K. Peters, M. Studer, J. 92-99 (Mar ). Botsis, A. locco, H. Limberger and R. Salathe, 19-28 (Mar.). Photoviscoelastic Stress Analysis of a Plate with a Central Hole—Y.-H. Errors in Crack Closure Measurements Caused by Flexure Test Fixture Zhao and J. Huang, 312-318 (Dec ). Support Effects—S. Johansson and M. E. Fitzpatrick, 47-51 (Mar ). Pressure Effects and Fracture of a Rubbery Particulate Composite—T. C. Experimental Analysis and Modeling of Biaxial Mechanical Behavior of Miller and C. T. Liu, 254-259 (Sept.). Woven Composite Reinforcements—K. Buet-Gautier and P. Boisse, Residual Stress Determination Using Blind-hole Drilling and Digital 260-269 (Sept.). Speckle Pattern Interferometry with Automated Data Processing—F. Experimental and Numerical Analysis of Vibrating Cracked Plates at Res¬ V. Diaz, G. H. Kaufmann and O. Moller, 319-323 (Dec ). onant Frequencies—C.-C. Ma and C.-H. Huang, 8-18 (Mar ). Spectrotemporal Analysis of Guided-wave Pulse-echo Signals: Part I. Experimental Investigation of Dynamic Punch Tests on Isotropic and Dispersive Systems—S.-C. Wooh and K. Veroy, 324-331 (Dec ). Composite Materials—C. Rubio-Gonzalez and J. J. Mason, 129-139 Spectrotemporal Analysis of Guided-wave Pulse-echo Signals: Part 2. (June). Numerical and Experimental Investigations—S.-C. Wooh and K. Experimental Investigation of Slosh Dynamics of Liquid-filled Con¬ Veroy, 332-342 (Dec.). tainers—N. C. Pal, S. K. Bhattacharyya and P. K. Sinha, 63-69 (Mar.). A Split Hopkinson Pressure Bar Technique to Determine Compressive Experimental Study on Employing Flexural Wave Measurement to Char¬ Stress-strain Data for Rock Materials—D. J. Frew, M. J. Forrestal and acterize Delamination in Beams—S. I. Ishak, G. R. Liu, S. P. Lim and W. Chen, 40-46 (Mar ). H. M. Shang, 157-164 (June). Strain Gage Method for Determining Stress Intensities of Sharp-notched Failure of Spot Welds under In-plane Static Loading—P. Wung, T. Walsh, Strips—T. Kondo, M. Kobayashi and H. Sekine, 1-7 (Mar.). A. Ourchane, W, Stewart and M. Jie, 100-106 (Mar.). Stress Evaluation by Pulse-echo Ultrasonic Longitudinal Wave—D. Fatigue Crack Shape Development of Plate-to-plate Welded Joints—S. T. Vangi, 277-281 (Sept ). Lie, S. P. Chiew, Z. Xiang and Z. Cen, 114-121 (Mar.). Experimental Mechanics • 421 Stress Separation of Thermoelastically Measured Isopachics—B. J. Rauch Three-dimensional Crack Tip Deformation Measurement Using Com¬ and R. E. Rowlands, 358-367 (Dec.). bined Moire-Sagnac Interferometry—B.S.-J. Kang and S. M. Ander¬ A Technique for Rapid Two-stage Dynamic Tensile Loading of Poly¬ son, 84-91 (Mar.). mers—V.P.W. Shim. J. Yuan and S.-H. Lee. 122-127 (Mar). Torsion Measurement Using Fiber Bragg Grating Sensors—X. G. Tian and X. M. Tao, 248-253 (.Sept ). AUTHOR INDEX Abot, J. L.—iNonlinear Behavior of Composite Sandwich Beams in Chrysochoos, A.—Analysis of Strain Localization During Tensile Tests Three-point Bending. 182-189 (June). by Digital Image Correlation, 29-39 (Mar ). Anderson, S. M.—Three-dimensional Crack Tip Deformation Measure¬ Damodaran, S. P—-Buckling Investigations on a Nuclear Reactor Inner ment Using Combined Moire-Sagnac Interferometry, 84-91 (Mar.). Vessel Model, 144-150 (June). Bacou, R.—Force and Shapes of Liquid Bridges Between Circular Pads, Daniel, 1. M.—Nonlinear Behavior of Composite Sandwich Beams in 351-357 (Dec.). Three-point Bending, 182-189 (June). Baek. T. H.—Hybrid Stress Analysis of Perforated Composites Using Davidson, J. H.—A Method for Measuring the Creep Behavior of Pres¬ Strain Gages. 195-203 (June). surized Polymer Tubing, 368-374 (Dec ). Beghini, M.—Measurement of Coatings’ Elastic Properties by Mechani¬ Diaz, F. V.—Residual Stress Determination Using Blind-hole Drilling and cal Methods: Part 1. Experimental Errors, 293-394 (Dec.). Digital Speckle Pattern Interferometry with Automated Data Pro¬ Beghini. M.—Measurement of Coatings’ Elastic Properties by Mechani¬ cessing, 319-324 (Dec ). cal Methods: Part 2. Application to Thermal Barrier Coatings, DiMaggio, S. J.—Accelerometer Spiking Under Cryogenic Conditions, 305-311 (Dec.). 174-181 (June). Benamati, G.—Measurement of Coatings’ Elastic Properties by Mechani¬ Du. Y.—Hygric Characterization of Composites Using an Antisymmetric cal Methods: Part 2. Application to Thermal Barrier Coatings, Cross-ply Specimen, 270-276 (Sept.). 305-311 (Dec). Duron, Z. H.—Accelerometer Spiking Under Cryogenic Conditions, Bertini. L.—Measurement of Coatings’ Elastic Properties by Mechanical 174-181 (June). Methods: Part 1. Experimental Errors, 293-304 (Dec ). Fitzpatrick, M. E.—Errors in Crack Closure Measurements Caused by Bertini. L.—Measurement of Coatings’ Elastic Properties by Mechanical Rexure Test Fixture Support Effects, 47-51 (Mar.). Methods: Part 2. Application to Thermal Barrier Coatings, 305-311 Forrestal, M. J.—A Split Hopkinson Pressure Bar Technique to Deter¬ (Dec.). mine Compressive Stress-strain Data for Rock Materials, 40-46 Bhattacharyya, S. K.—Experimental Investigation of Slosh Dynamics of (Mar.). Liquid-filled Containers, 63-69 (Mar). Frendo, F.—Measurement of Coatings’ Elastic Properties by Mechanical Boehlert, C. J.—Development of High-temperature Microsample Testing, Methods: Part 1. Experimental Errors, 293-304 (Dec.). 242-247 (Sept.). Frendo. F.—Measurement of Coatings’ Elastic Properties by Mechanical Boisse, P.—Experimental Analysis and Modeling of Biaxial Mechanical Methods: Part 2. Application to Thermal Barrier Coatings, 305-311 Behavior of Woven Composite Reinforcements, 260-269 (Sept.). (Dec). Bose, M.R.S.C.—Buckling Investigations on a Nuclear Reactor Inner Frew, D. J.—A Split Hopkinson Pressure Bar Technique to Determine Vessel Model. 144-150 (June). Compressive Stress-strain Data for Rock Materials, 40-46 (Mar ). Botsis, J.—Embedded Optical Fiber Bragg Grating Sensor in a Nonuni¬ Gdoutos. E. E.—Nonlinear Behavior of Composite Sandwich Beams in form Strain Field: Measurements and Simulations. 19-28 (Mar.). Three-point Bending, 182-189 (June). Broviak, B. J.—Brittle Fracture; Variation of Fracture Toughness with Guo, Z.—Investigation of Displacement Fields in an Abrasive Wateijet Constraint and Crack Curving Under Mode 1 Conditions, 232-241 Drilling Process: Part 1. Experimental Measurements, 375-387 (Dec ). (Sept.). Guo, Z,—Investigation of Displacement Fields in an Abrasive Wateijet Buet-Gautier, K.—Experimental Analysis and Modeling of Biaxial Me¬ Drilling Process: Part 2. Numerical Analysis, 388-402 (Dec.). chanical Behavior of Woven Composite Reinforcements, 260-269 Hawong, J.-S.—Photoelastic Experimental Hybrid Method for Fracture (Sept). Mechanics of Anisotropic Materials, 92-99 (Mar.). Cen, Z.—Fatigue Crack Shape Development of Plate-to-plate Welded Hayden, M. J.—Development of High-temperature Microsample Testing, Joints, 114-121 (Mar.). 242-247 (Sept.). Chao, Y. J.—Accurate Integration of Surface Profile Data with Quantita¬ He, L. F.—Acoustoelastic Determination of Residual Stress with Laser tive Error Analysis, 77-83 (Mar,). Doppler Velocimetry, 190-194 (June). Chao, Y. J.—Brittle Fracture: Variation of Fracture Toughness with Con¬ Hemker, K. J.—Development of High-tempcrature Microsample Testing, straint and Crack Curving Under Mode I Conditions, 232-241 (Sept ). 242-247 (Sept.). Chao. Y. J.—Development and Assessment of a Single-image Fringe Pro¬ Holstein, D.—Hybrid Experimental-numerical Concept of Residual Stress jection Method for Dynamic Applications, 205-217 (Sept.). Analysis in Laser Weldments, 343-350 (Dec.). Chellapandi, P.—Buckling Investigations on a Nuclear Reactor Inner Ves¬ Huang, C.-H.—Experimental and .Numerical Analysis of Vibrating sel Model, 144-150 (June). Cracked Plates at Resonant Frequencies, 8-18 (Mar). Chen, H.—Advances in Scanning Electron Microscope Moire, 165-173 Huang. J.—Photoviscoelastic Stress Analysis of a Plate with a Central (June). Hole, 312-318 (Dec.). Chen. W.—A Split Hopkinson Pressure Bar Technique to Determine Hwang, S.-F.—-Hygric Characterization of Composites Using an Compressive Stress-strain Data for Rock Materials, 40-46 (Mar). Antisymmetric Cross-ply Specimen, 270-276 (Sept.). Cheng, P.—Accurate Integration of Surface Profile Data with Quantitative locco, A.—Embedded Optical Fiber Bragg Grating Sensor in a Nonuni¬ Error Analysis, 77-83 (Mar.). form Strain Field: Measurements and Simulations, 19-28 (Mar ). Chiew, S. P.—Fatigue Crack Shape Development of Plate-to-plate Welded Ishak, S. I.—Experimental Study on Employing Rexural Wave Measure¬ Joints, 114-121 (Mar.). ment to Characterize Delamination in Beams, 157-164 (June). Choi, B.-H.—Effect of Plastic Zone on the Fatigue Crack Propagation Jie, M.—Failure of Spot Welds under In-plane Static Loading, 100-106 Behavior Between Two Fatigue Cracks, 225-231 (Sept.). (Mar.). I 422 • Vol. 41, No. 4, December 2001 Johansson. S.—Errors in Crack Closure Measurements Caused by Flexure Muracciole, J.-M.—Analysis of Strain Localization During Tensile Tests Test Fixture Support Effects, 47-51 (Mar ). by Digital Image Correlation, 29-39 (Mar ). Jiiptner, W.—Hybrid Experimental-numerical Concept of R-'idual Stress Nemoz-Gaillard, M.—Analysis of Strain Localization During Tensile Analysis in Laser Weldments, 343-350 (Dec.). Tests by Digital Image Correlation, 29-39 (Mar ). Kang. B.S.-J.—Three-dimensional Crack Tip Deformation Measurement Odom, E. M.—Composite Specimen Bearing Failure Reduction in Using Combined Moire-Sagnac Interferometry. 84-91 (Mar.). losipescu Shear Tests, 218-224 (Sept.). Kaufmann, G. H.—Residual Stress Determination Using Blind-hole Ourchane, A.—Failure of Spot Welds under In-plane Static Loading. Drilling and Digital Speckle Pattern Interferometry with Automated 100-106 (Mar ). Data Processing, 319-323 (Dec.). Pal, N. C.—Experimental Investigation of Slosh Dynamics of Liquid- Kobayashi, M.—Strain Gage Method for Determining Stress Intensities filled Containers, 63-69 (Mar ). of Sharp-notched Strips, 1-7 (Mar ). Palaninathan. R.—Buckling Investigations on a Nuclear Reactor Inner Kobayashi, S.—Acoustoelastic Determination of Residual Stress with La¬ Vessel Model, 144-150 (June). ser Doppler Velocimetry, 190-194 (June). Peters. K.—Embedded Optical Fiber Bragg Grating Sensor in a Nonuni- Kondo, T.—Strain Gage Method for Determining Stress Intensities of form Strain Field: Measurements and Simulations. 19-28 (Mar ). Sharp-notched Strips, 1-7 (Mar ). Qatu, M. S.—Measurement of Steering Gear Impedance. 151-156 (June). Kujawinska. M.—Hybrid Experimental-numerical Concept of Residual Ramulu. M.—Investigation of Displacement Fields in an Abrasive Stress Analysis in Laser Weldments, 343-350 (Dec.) Waterjet Drilling Process: Part 1. Experimental Measurements. Kysar, J. W.—Crack-opening Interferometry at Interfaces of Transparent 375-387 (Dec ). Materials and Metals. 52-57 (Mar.). Ramulu, M.—Investigation of Displacement Fields in an Abrasive Lanza di Scalea. F.—Acoustic Emission Monitoring of Carbon-fiber- Waterjet Drilling Process: Part 2. Numerical Analysis, 388-402 reinforced-polymer Bridge Stay Cables in Large-scale Testing. (Dec.). 282-290 (Sept.). Rauch, B. J.—Stress Separation of Thermoelastically Measured Larson, M. C.—Force and Shapes of Liquid Bridges Between Circular Isopachics. 358-367 (Dec.). Pads, 351-357 (Dec ). Rizzo, P.—Acoustic Emission Monitoring of Carbon-fiber-rein- Lee, H.-J.—Photoelastic Experimental Hybrid Method for Fracture Me¬ forced-polymer Bridge Stay Cables in Large-scale Testing, 282-290 chanics of Anisotropic Materials. 92-99 (Mar ). (Sept). Lee. S.-H.—A Technique for Rapid Two-stage Dynamic Tensile Loading Rowlands, R. E.—Hybrid Stress Analysis of Perforated Composites of Polymers. 122-127 (Mar). Using Strain Gages, 195-203 (June). Li, N.—Accurate Integration of Surface Profile Data with Quantitative Rowlands. R. E.—Stress Separation of Thermoelastically Measured Error Analysis. 77-83 (Mar.). Isopachics. 358-367 (Dec.). Lie, S. T—Fatigue Crack Shape Development of Plate-to-plate Welded Rubin. S.—Accelerometer Spiking Under Cryogenic Conditions, 174-181 Joints. 114-121 (Mar.). (June). Lim, S. P.—Experimental Study on Employing Flexural Wave Measure¬ Rubio-Gonzalez, C.—Experimental Investigation of Dynamic Punch Tests ment to Characterize Delamination in Beams. 157-164 (June). on Isotropic and Composite Materials, 129-139 (June). Limberger, H.—Embedded Optical Fiber Bragg Grating Sensor in a Non- Salathe, R.—Embedded Optical Fiber Bragg Grating Sensor in a Nonuni¬ uniform Strain Field: Measurements and Simulations, 19-28 (Mar.). form Strain Field: Measurements and Simulations, 19-28 (Mar.). Lin, S. T.—A New Moire Interferometer for Measuring In-plane Dis¬ Salbut, L.—Hybrid Experimental-numerical Concept of Residual Stress placement. 140-143 (June). Analysis in Laser Weldments, 343-350 (Dec.). Lira, 1.—Electronic Speckle Pattern Interferometry Analysis of Tensile Schreier, H. W.—Development and Assessment of a Single-image Fringe Tests of Semihard Copper Sheets, 58-62 (Mar.). Projection -Method for Dynamic Applications, 205-217 (Sept ). Liu, C. T.—Pressure Effects and Fracture of a Rubbery Particulate Com¬ Sekine, H.—Strain Gage Method for Determining Stress Intensities of posite, 254-259 (Sept.). Sharp-notched Strips, 1-7 (Mar.). Liu, D.—Advances in Scanning Electron Microscope Moire, 165-173 Shang, H. M.—Experimental Study on Employing Flexural Wave Mea¬ (June). surement to Characterize Delamination in Beams. 157-164 (June). Liu, G. R.—Experimental Study on Employing Rexural Wave Measure¬ Shim, V.P.W.—A Technique for Rapid Two-stage Dynamic Tensile ment to Characterize Delamination in Beams. 157-164 (June). Loading of Polymers, 122-127 (Mar ). Liu, S.—Brittle Fracture: Variation of Fracture Toughness with Constraint Shin, D.-C.—Photoelastic Experimental Hybrid Method for Fracture Me¬ and Crack Curving Under Mode I Conditions, 232-241 (Sept.). chanics of Anisotropic Materials, 92-99 (Mar.). Llewellyn, D. R.—Measurement of Steering Gear Impedance, 151-156 Sinha, P. K.—Experimental Investigation of Slosh Dynamics of Liquid- (June). filled Containers. 63-69 (Mar.). Ma, C.-C.—Experimental and Numerical Analysis of Vibrating Cracked Song, S.-H.—Effect of Plastic Zone on the Fatigue Crack Propagation Plates at Resonant Frequencies, 8-18 (Mar.). Behavior Between Two Fatigue Cracks, 225-231 (Sept.). Mantell. S. C.—A Method for Measuring the Creep Behavior of Pressur¬ Spadafora. W. G.—Measurement of Steering Gear Impedance. 151-156 ized Polymer Tubing. 368-374 (Dec ). (June). Martinez, A.—Electronic Speckle Pattern Interferometry Analysis of Ten¬ Stewart, W.—Failure of Spot Welds under In-plane Static Loading. sile Tests of Semihard Copper Sheets, 58-62 (Mar.). 100-106 (Mar ). Mason, J. J.—Experimental Investigation of Dynamic Punch Tests on Iso¬ Studer, M.—Embedded Optical Fiber Bragg Grating Sensor in a Nonuni¬ tropic and Composite Materials, 129-139 (June). form Strain Field: Measurements and Simulations. 19-28 (Mar ). McNeill, S. R.—Accurate Integration of Surface Profile Data with Quan¬ Sutton, M. A.—Accurate Integration of Surface Profile Data with Quanti¬ titative Error Analysis, 77-83 (Mar.). tative Error Analysis, 77-83 (Mar ). McNeill, S. R.—Development and Assessment of a Single-image Fringe Sutton, M. A.—Development and Assessment of a Single-image Fringe Projection Method for Dynamic Applications, 205-217 (Sept.). Projection -Method for Dynamic Applications, 205-217 (Sept.). Miller, T. C.—Pressure Effects and Fracture of a Rubbery Particulate Tao, X. M.—Torsion Measurement Using Fiber Bragg Grating Sensors. Composite, 254-259 (Sept ). 248-253 (Sept.). Mbller, O.—Residual Stress Determination Using Blind-hole Drilling and Teel, J. D.—Composite Specimen Bearing Failure Reduction in losipescu Digital Speckle Pattern Interferometry with Automated Data Pro¬ Shear Tests. 218-224 (Sept.). cessing, 319-323 (Dec ). Tew, B. W.—Composite Specimen Bearing Failure Reduction in Miinzemayer, M.—Electronic Speckle Pattern Interferometry Analysis of losipescu Shear Tests. 218-224 (Sept ). Tensile Tests of Semihard Copper Sheets, 58-62 (Mar.). Thomas, G.—Buckling Investigations on a Nuclear Reactor Inner Vessel Model, 144-150 (June). Experimental Mechanics • 423 Tian. X. G.—Torsion Measurement Using Fiber Bragg Grating Sensors, Wooh, S,-C.—Hygric Characterization of Woven Glass/Epoxy Compos¬ 248-253 (Sept.). ites, 70-76 (Mar.). Tsai, C.-L.—Hygric Characterization of Composites Using an Wooh, S.-C.—Spectrotemporal Analysis of Guided-wave Pulse-echo Sig¬ Antisymmetric Cross-ply Specimen, 270-276 (Sept.). nals: Part 1. Dispersive Systems, 324-331 (Dec.). Tsai, C.-L.—Hygric Characterization of Woven Glass/Epoxy Composites, Wooh, S.-C.—Spectrotemporal Analysis of Guided-wave Pulse-echo Sig¬ 70-76 (Mar.). nals: Part 2. Numerical and Experimental Investigations, 332-342 Vangi, D.—Stress Evaluation by Pulse-echo Ultrasonic Longitudinal (Dec.). Wave, 277-281 (Sept.). Wu, C.—A Method for Measuring the Creep Behavior of Pressurized Verges, M. A.—Force and Shapes of Liquid Bridges Between Circular Polymer Tubing, 368-374 (Dec.). Pads, 351-357 (Dec ). Wung, P.—Failure of Spot Welds under In-plane Static Loading, 100-106 Veroy, K.—Spectrotemporal Analysis of Guided-wave Pulse-echo Sig¬ (Mar.). nals: Part 1. Dispersive Systems, 324-331 (Dec.). Wung, P.—A Force-based Failure Criterion for Spot Weld Design, Veroy, K.—Spectrotemporal Analysis of Guided-wave Pulse-echo Sig¬ 107-113 (Mar ). nals: Part 2. Numerical and Experimental Investigations, 332-342 Xiang, Z.—Fatigue Crack Shape Development of Plate-to-plate Welded (Dec.). Joints, 114-121 (Mar.). Vial-Edwards, C.—Electronic Speckle Pattern Interferometry Analysis of Yuan, J.—A Technique for Rapid Two-stage Dynamic Tensile Loading of Tensile Tests of Semihard Copper Sheets, 58-62 (Mar ). Polymers, 122-127 (Mar.). Walsh, T.—Failure of Spot Welds under In-plane Static Loading, 100-106 Zhao, W.—Development and Assessment of a Single-image Fringe Pro¬ (.Mar). jection Method for Dynamic Applications, 205-217 (Sept ). Wang, K.-A.—Nonlinear Behavior of Composite Sandwich Beams in Zhao, Y.-H.—Photoviscoelastic Stress Analysis of a Plate with a Central Three-point Bending, 182-189 (June). Hole, 312-318 (Dec.). Wattrisse, B.—Analysis of Strain Localization During Tensile Tests by Zupan, M.—Development of High-temperature Microsample Testing, Digital Image Correlation, 29-39 (Mar.). 242-247 (Sept.). Wooh, S.-C.—Hygric Characterization of Composites Using an Antisymmetric Cross-ply Specimen, 270-276 (Sept.). 424 • Vol. 41, No. 4, December 2001 /

See more

The list of books you might like

Most books are stored in the elastic cloud where traffic is expensive. For this reason, we have a limit on daily download.