DRAWING SYMBOLS View Name DRAWING ABBREVIATIONS PROJECT TEAM ABB CS-10372

70 Pages·2017·22.06 MB·English

CS-10372
SHERIFF SUBSTATION PRECINCT 5
1641 S. PARKER ROAD
DENVER, CO 80231
BUILDING CODE INFORMATION PROJECT INFORMATION SHEET INDEX
GOVERNING CODES: LEGAL DESCRIPTION:
2015 INTERNATIONAL BUILDING CODE (IBC) LOT 1, BLOCK 1, LITTLE LEARNERS SUBDIVISION FILING NO. 2, COUNTY OF ARAPAHOE, STATE ARCHITECTURAL
2015 INTERNATIONAL MECHANICAL CODE (IMC) OF COLORADO.
A0.0 COVER SHEET & PROJECT INFO
2015 INTERNATIONAL FIRE CODE (IFC)
2015 INTERNATIONAL FUEL GAS CODE (IFGC) SAID PARCEL CONTAINS AN AREA OF 20,910 SQUARE FEET, OR 0.480 ACRES, MORE OR LESS
2009 INTERNATIONAL ENERGY CONSERVATION CODE (IECC) CIVIL
2015 UNIFORM PLUMBING CODE (UPC) PROJECT DESCRIPTION: C1 CIVIL COVER SHEET
2014 NATIONAL ELECTRICAL CODE (NEC) THE SCOPE OF WORK WILL INVOLVE INTERIOR AND EXTERIOR REMODEL OF THE EXISTING C2 GESC PLAN
BUILDING AND SITE. THE EXTERIOR RENOVATION WILL INCLUDE A NEW RAMP AND PARAPET.
C3 SITE GRADING AND UTILITY PLAN
CONSTRUCTION TYPE: THE INTERIOR RENOVATION WILL INCLUDE A NEW FLOOR PLAN LAYOUT AND FINISHES.
C4 POND PLAN & DETAILS
TYPE V -B NOT SPRINKLERED
BUILDING DESCRIPTION: C5 O & M PLAN
OCCUPANCY CLASSIFICATIONS: EXISTING WOOD FRAMED ONE STORY BUILDING WITH EXTERIOR BRICK VENEER AND STUCCO.
B BUSINESS LANDSCAPE
A-3 ASSEMBLY BUILDING DATA:
L1 LANDSCAPE PLAN
A-3 = 645SF : 15 = 43 OCCUPANTS 1 STORY BUILDING, EXISTING HEIGHT 10'-0".
B = 2742 : 100 = 28 OCCUPANTS
ARCHITECTURAL
TOTAL = 71 OCCUPANTS
D2.0 DEMO PLAN
REQUIRED EXIT WIDTH 71 X 0.2 = 14.2" REQUIRED D2.1 DEMO RCP
EXIT PROVIDED FIRST FLOOR = (3) @ 32" CLEAR DOOR OPENINGS = 96"
SITE MAP
ARCHITECTURAL
REQUIRED PLUMBING FIXTURES:
A0.2 SPECIFICATIONS
A-3 = 43: 2 = 21 MEN, 22 WOMEN
TOILETS = .535 MEN, .55 WOMEN A0.3 SITE PLAN
SINKS = .28 MEN, .29 WOMEN A2.1 FLOOR PLAN
A3.0 REFLECTED CEILING PLAN
B = 28: 2 = 14 MEN, 14 WOMEN
A4.0 EXTERIOR ELEVATIONS
TOILETS = .56 MEN, .56 WOMEN
A5.0 DETAILS AND SECTIONS
SINKS = .35 MEN, .35 WOMEN
A6.0 ROOF PLAN
TOTAL SINKS REQUIRED = .63 MEN, .64 WOMEN A9.0 INTERIOR ELEVATIONS AND SCHEDULES
TOTAL TOILETS REQUIRED = 1.095 MEN, 1.11 WOMEN A9.1 FINISH PLAN copyright 2017
These plans and written material are
A9.2 FINISH SCHEDULE AND LEGENDS instruments of service and are the property
TOTAL TOILETS PRIVIDED = 3 MEN, 3 WOMEN of Intergroup, Inc. and may not be
TOTAL SINKS PROVIDED = 3 MEN, 3 WOMEN duplicated, disclosed or reproduced without
the written consent of the Architect.
STRUCTURAL
SERVICE SINKS = 1 Infringements will be prosecuted.
S1.1 GENERAL NOTES AND TYPICAL SECTIONS
S2.1 FLOOR PLAN
OCCUPANCY SEPARATION REQUIREMENTS:
S2.2 ROOF PLAN
NO SEPARATIONS REQUIRED
S3.1 FOUNDATION / FIRST FLOOR SECTIONS
S4.1 ROOF SECTIONS
PLUMBING
P0.1 PLUMBING SPECIFICATIONS AND LEGEND
B P0.2 PLUMBING SCHEDULES 5
1270 SF
P0.3 PLUMBING DIAGRAMS
T
P0.4 PLUMBING ISOMETRICS
P2.0 BASEMENT PLUMBING DEMO PLAN C
P2.1 FIRST FLOOR PLUMBING DEMO PLAN
N
P3.0 UNDERGROUND BASEMENT PLUMBING PLAN
I
P3.1 BASEMENT PLUMBING PLAN
C
P3.2 FIRST FLOOR PLUMBING PLAN
A E
W
OFFICE F. D MECHANICAL R
E 645 SF M0.1 MECHANICAL SPECIFICATIONS & LEGEND
R BRIEFING P
M0.2 MECHANICAL SCHEDULES
DN

M0.3 MECHANICAL SCHEDULES N
M0.4 MECHANICAL DIAGRAMS
O
M2.0 BASEMENT MECHANICAL DEMOLITION PLAN
M2.1 FIRST FLOOR MECHANICAL DEMOLITION PLAN I
T
OFFICE OFFICE M2.2 ROOF MECHANICAL DEMOLITION PLAN
M3.0 BASEMENT MECHANICAL PLAN A
M3.1 FIRST FLOOR MECHANICAL PLAN T
M3.2 ROOF MECHANICAL PLAN
S
P0.5 MECHANICAL DIAGRAMS & COMCHECK
DRAWING SYMBOLS B
CONFERENCE P0.7 MECHANICAL DIAGRAMS
U
D
ELECTRICAL S A Y
SECTION REFERENCE WALL TYPE E0.1 ELECTRICAL SPECIFICATIONS AND LEGEND O1 T
X#-X-# ? KEYNOTE E0.2 ELECTRICAL DIAGRAMS F R3 N
2 U
SIM SIM E0.3 ELECTRICAL SCHEDULES F ER80 O
A51.1 A51.1 HLEEGIGEHNTD ( SFOEER WKEAYL)L ? MATERIAL TAG EE13..00 EBALESCETMREINCTA LP OSIWTEE RP LPALNAN RI RKCO E C
1 FIRST FLOOR CODE PLAN WALL BUILDING SHEET NUMBER F(HIROEU RRASWT)INAGL L TAG 100 DOOR NUMBER EE33..12 FRIOROSTF PFLOOWOERR P POLWANER PLAN E S. PAER, AHO
SCALE: 3/32" = 1'-0" SECTION # WINDOW NUMBER E4.0 BASEMENT LIGHTING PLAN H 41 NV AP
E4.1 FIRST FLOOR LIGHTING PLAN S 6E R
1D A
ELEVATION XXX SYSTEM NOTE TAG
REFERENCE DATE DESC.
WH 11 DRAWING/DETAIL NUMBER 10-23-2017 AS-BUILT
B
11 A6.1 11 X View Name CABINET WIDTH 3'-0" W. 11-16-2017 SD PLANS
A-XXX
or 1472 SF 11 1 CABINET DEPTH 2'-0" D. 11-22-2017 PROGRESS
uth FD UP SNHUEMEBTE R A1 SCALE:1/8" = 1'-0" FINISH -SEE PLX 12-06-2017 PROGRESS
A SCALE SCHEDULE PROJECT TEAM 12-19-2017 PROGRESS
y: INTERIOR EXTERIOR
B FD DRAWING TITLE CASEWORK TAG 01-18-2018 PROGRESS
ELEVATION
01-19-2018 NEW STAIR
OWNER: CONTRACTOR: STRUCTURAL ENGINEER:
ARAPAHOE COUNTY FACILITIES TBD MONROE AND NEWELL ENGINEERS 02-16-2018 75% DD
1610 WEST LITTLETON BLVD SUITE 100 1400 GLENARM PLACE, SUITE 101
DRAWING ABBREVIATIONS
LITTLETON CO, 80120 CIVIL ENGINEER: DENVER, CO 80202 02-26-2018 100% DD
TEL: [phone] WARE MALCOMB TEL: [phone]
03-22-2018 L & E SUBMIT
DICK HAWES 990 S BROADWAY #230 JIM NESS
DENVER, CO 80209 04-02-2018 50% CD
AC ABOVE COUNTER F.E. FIRE EXTINGUISHER Q.T. QUARRY TILE ARCHITECT: TEL: [phone] MECHANICAL ENGINEER:
A.F.F. ABOVE FINISH FLOOR F.H.C. FIRE HOSE CABINET REF. REFRIGERATOR INTERGROUP ARCHITECTS CHRIS STRAWN MEP ENGINEERING 04-12-2018 75% CD
ALT. ALTERNATE F.O.M. FACE OF MASONRY S.A.T. SUSPENDED ACOUSTICAL TILE 2000 W. LITTLETON BLVD 3565 SOUTH YOSEMITE STREET
04-16-2018 90% CD
CLG. CEILING F.O.S. FACE OF STUD S.C. SOLID CORE LITTLETON, CO 80120 LANDSCAPE ARCHITECT: TEL: [phone]
CONC. CONCRETE F.B.T. FINISH BY TENANT SIM. SIMILAR TEL: [phone] MEURAN DESIGN GROUP TOM TARRANT 04-23-2018 BID SET
CONT. CONTINUOUS F.R.P. FIBERGLASS REINFORCED PLASTIC STL. STEEL BEATRIZ ARBAT 852 BROADWAY #250
M CPT. CARPET G.D. GARBAGE DISPOSAL T.O.C. TOP OF CONCRETE DENVER, CO 80203 ELECTRICAL ENGINEER:
P C.T. CERAMIC TILE HC. HANDICAPPED T.O.S. TOP OF STEEL/ SLAB TEL: [phone] MEP ENGINEERING

8 D.F. DRINKING FOUNTAIN H.M. HOLLOW METAL U.O.N. UNLESS OTHERWISE NOTED KERRY SMEESTER 3565 SOUTH YOSEMITE STREET
2 BASEMENT FLOOR CODE PLAN
8: DS DOWNSPOUT H.T. HEIGHT V.C.T. VINYL COMPOSITION TILE TEL: [phone] A0.0
5 2 DW DISHWASHER INT. INTERIOR W.H. WATER HEATER NICK SEITZ
1: SCALE: 3/32" = 1'-0" E.O.S. EDGE OF SLAB MFG. MANUFACTURER W.W.F. WELDED WIRE FABRIC
8 E.W.C. ELECTRIC WATER COOLER N. NEW ITEM PLUMBING ENGINEER:
01 E/ EXG. EXISTING N.I.C. NOT IN CONTRACT MEP ENGINEERING COVER SHEET &
2 EXT. EXTERIOR N.T.S. NOT TO SCALE 3565 SOUTH YOSEMITE STREET
/ PROJECT INFO
3 OPNG. OPENING TEL: [phone]
2
/ NIMMA EFTEKHARI
4

CS-10372
6 A5.0
5
1
GENERAL NOTES:
G
1. IT IS THE CONTRACTOR'S RESPONSIBILITY TO OBTAIN A 1
DEMOLITION PERMIT PRIOR TO DEMOLITION, WHICH INCLUDES
THE STATE REQUIRED INSPECTION AND TESTING OF ASBESTOS.
1
6 1
2. THE CONTRACTOR SHALL MAINTAIN THE EXISTING STRUCTURAL 12
INTEGRITY OF THE BUILDING THROUGHOUT ALL PHASES OF 12
CONSTRUCTION.
8
12
3. EXISTING CONDITIONS TO REMAIN AS ILLUSTRATED IN LIGHT 1
7
LINE-WORK UNLESS NOTED OTHERWISE, BOLD DASHED ITEMS 2 W 2
INDICATE SCOPE OF WORK TO BE REMOVED. D
1
12
4. WFRHOEMR ES ITTEER AMN D'R EPMEROFVOER' IMS ULESGEADL, CDOISNPTORSAACLT.OR SHALL REMOVE EF. 10 1
R 1
5. WHERE 'SALVAGE' IS USED THE CONTRACTOR SHALL REUSE THE
MATERIALS OR EQUIPMENT ON THIS PROJECT OR RETURN TO
THE OWNER.
1
1
6. STORE SALVAGEABLE MATERIALS IN A LOCATION AS DIRECTED
BY OWNER. ALL OTHER MATERIALS AND DEBRIS SHALL BE 12 1
DISPOSED OF BY THE CONTRACTOR. 3
2
7. REINSTALLED EQUIPMENT AND DEVICES ARE TO BE CLEANED OF
12
ALL FOREIGN MATERIAL. REPLACE EQUIPMENT OR DEVICES
2
WHICH ARE DEFECTIVE OR DAMAGED DURING RELOCATION.
2
8. CONTRACTOR TO COORDINATE ALL DEMOLITION ACTIVITIES AND 1
RESPONSIBILITIES. REFER TO ENGINEERING DRAWINGS FOR
ADDITIONAL INFORMATION. 12 6
9. PATCH, REPAIR OR REPLACE ANY ITEMS DAMAGED DURING 12
DEMOLITION.
1
10. REMOVE AND REPLACE ALL SEALANTS WITHIN THE SCOPE OF
4
WORK.
1
11. CONTRACTOR TO FIELD VERIFY ALL EXISTING CONDITIONS PRIOR
1 1 1
TO COMMENCEMENT OF WORK. CONTRACTOR SHALL
COMMUNICATE ANY DISCREPANCIES TO THE ARCHITECT
IMMEDIATELY FOR FURTHER COORDINATION.
12. PREP ALL SURFACES TO TAKE NEW FINISHES, TYP. 1
REMOVE AND
REPLACE EXISTING
13. CONTRACTOR TO REFER TO PHASE I ENVIRONMENTAL SITE
HANDRAILS
ASSESSMENT AND ASBESTOS SURVEY PROVIDED BY OWNER.
1
copyright 2017
These plans and written material are
instruments of service and are the property
of Intergroup, Inc. and may not be
duplicated, disclosed or reproduced without
the written consent of the Architect.
12 Infringements will be prosecuted.
2
9 9
5
1

T
C
9 9 WH
11 N
FIRST FLOOR DEMO PLAN NORTH
I
C
8 8 1
SCALE: 1/4" = 1'-0" E
8 9 R
8 P
1

2
N
2 O
I
T
KEY NOTES: A
4 T
9 12 12
A5.0 S
1 9 1. DEMO EXISTING WALLS AS SHOWN. REMOVE ALL CEILING AND
B
WALL DRYWALL DOWN TO STUD, TYP. UNO. REPLACE AS
NEEDED, RE: FLOOR PLANS AND RCP. U
D
10
2. REMOVE ALL EXISTING INTERIOR AND EXTERIOR DOORS AND S A Y
FRAMES. O1 T
R3 N
F
2 U
3. REMOVE EXISTING CASEWORK. SALVAGE FOR RELOCATION. F ER80 O
9 KO C
4. DEMO EXISTING HEADER AND FOLDING PARTITION AS SHOWN. RI RC E
A O
5. DEMO EXISTING STOREFRONT. E PR, H

1 6. DEMO EXISTING INTERIOR WINDOWS. H 1 S.NVE APA
A5.0 4
2 S 6E R
7. EXISTING KITCHEN CABINETRY AND EQUIPMENT TO REMAIN IN 1D A
PLACE. EXISTING KITCHEN GYP. IN WALLS TO REMAIN
UNDISTURBED. CEILING TO BE REMOVED EXCEPT DIRECTLY
DATE DESC.
ABOVE CASEWORK.
10-23-2017 AS-BUILT
8. REMOVE EXISTING PLUMBING FIXTURES. RE: PLUMBING
11-16-2017 SD PLANS
9. REMOVE EXISTING EXTERIOR WINDOWS AND INFILL WALL.
11-22-2017 PROGRESS
r
o
h 10. DEMO EXISTING STAIR. RE: STRUCTURAL.
12-06-2017 PROGRESS
t
u
A
11. REMOVE EXISTING WATER HEATER. RE: PLUMBING. 12-19-2017 PROGRESS
:
y
B
01-18-2018 PROGRESS
12. REMOVE EXISTING FLOORING. PREP EXISTING FLOOR TO
RECEIVE NEW FINISHES, TYP. 01-19-2018 NEW STAIR
02-16-2018 75% DD
02-26-2018 100% DD
03-22-2018 L & E SUBMIT
04-02-2018 50% CD
04-12-2018 75% CD
04-16-2018 90% CD
04-23-2018 BID SET
M
P

2
5
3: BASEMENT DEMO PLAN NORTH D2.0
0 2
:
5
SCALE: 1/4" = 1'-0"
8
1
0 DEMO PLAN
2
/
3
2
/
4
CS-10372
2
GENERAL NOTES:
1
1. IT IS THE CONTRACTOR'S RESPONSIBILITY TO OBTAIN A
1
DEMOLITION PERMIT PRIOR TO DEMOLITION, WHICH INCLUDES
7' - 10 1/4" 7' - 10 1/4" 7' - 10 1/4" 7' - 10 1/4"
THE STATE REQUIRED INSPECTION AND TESTING OF ASBESTOS.
2. THE CONTRACTOR SHALL MAINTAIN THE EXISTING STRUCTURAL
INTEGRITY OF THE BUILDING THROUGHOUT ALL PHASES OF 7' - 10 1/4"
1 1 1
CONSTRUCTION.
3. EXISTING CONDITIONS TO REMAIN AS ILLUSTRATED IN LIGHT 2
LINE-WORK UNLESS NOTED OTHERWISE, BOLD DASHED ITEMS
INDICATE SCOPE OF WORK TO BE REMOVED.
4. WHERE TERM 'REMOVE' IS USED, CONTRACTOR SHALL REMOVE
FROM SITE AND PERFORM LEGAL DISPOSAL.
7' - 10 1/4"
1
5. WHERE 'SALVAGE' IS USED THE CONTRACTOR SHALL REUSE THE
MATERIALS OR EQUIPMENT ON THIS PROJECT OR RETURN TO 1
7' - 10 1/4"
THE OWNER.
6. STORE SALVAGEABLE MATERIALS IN A LOCATION AS DIRECTED 7' - 10 1/4" 1
2
BY OWNER. ALL OTHER MATERIALS AND DEBRIS SHALL BE
DISPOSED OF BY THE CONTRACTOR.
7' - 10 1/4"
7. REINSTALLED EQUIPMENT AND DEVICES ARE TO BE CLEANED OF
1
ALL FOREIGN MATERIAL. REPLACE EQUIPMENT OR DEVICES
WHICH ARE DEFECTIVE OR DAMAGED DURING RELOCATION.
8. CONTRACTOR TO COORDINATE ALL DEMOLITION ACTIVITIES AND
2 2 2 2
RESPONSIBILITIES. REFER TO ENGINEERING DRAWINGS FOR
ADDITIONAL INFORMATION.
3 3
9. PATCH, REPAIR OR REPLACE ANY ITEMS DAMAGED DURING
DEMOLITION.
10. REMOVE AND REPLACE ALL SEALANTS WITHIN THE SCOPE OF
WORK. 2
11. CONTRACTOR TO FIELD VERIFY ALL EXISTING CONDITIONS PRIOR
TO COMMENCEMENT OF WORK. CONTRACTOR SHALL 2
COMMUNICATE ANY DISCREPANCIES TO THE ARCHITECT 1
IMMEDIATELY FOR FURTHER COORDINATION.
12. PREP ALL SURFACES TO TAKE NEW FINISHES, TYP. copyright 2017
7' - 10 1/4"
These plans and written material are
instruments of service and are the property
13. CONTRACTOR TO REFER TO PHASE I ENVIRONMENTAL SITE
of Intergroup, Inc. and may not be
ASSESSMENT AND ASBESTOS SURVEY PROVIDED BY OWNER. duplicated, disclosed or reproduced without
the written consent of the Architect.
Infringements will be prosecuted.
FIRST FLOOR DEMO RCP NORTH
2
SCALE: 1/4" = 1'-0"
5

T
C
N
I
C
E
R
P

KEY NOTES: N
O
1. DEMO EXISTING GYP CEILING AND SOFFITS TO WOOD JOISTS. I
T
2. REMOVE EXISTING LIGHT FIXTURES. RE: ELECTRICAL. A
1 1 7' - 10 1/2"
3 3 1 3 T
3. REMOVE EXISTING EXIT LIGHT. RE: ELECTRICAL FOR NEW
1
LOCATIONS. S
B
4. DEMO EXISTING SOFFIT.
U
4 4 D
7' - 2" 1 S A Y
O1 T
R3 N
F
2 U
F ER80 O
KO C
RI RC E
A O
E PR, H

7' - 10 1/2" S.E A
H V P
1N A
4
1 S 6E R
1D A
3
3
DATE DESC.
7' - 10 1/2" 10-23-2017 AS-BUILT
11-16-2017 SD PLANS
1 11-22-2017 PROGRESS
r
o
h
12-06-2017 PROGRESS
t
u
A
12-19-2017 PROGRESS
y: 3
B
01-18-2018 PROGRESS
01-19-2018 NEW STAIR
02-16-2018 75% DD
02-26-2018 100% DD
03-22-2018 L & E SUBMIT
04-02-2018 50% CD
04-12-2018 75% CD
04-16-2018 90% CD
04-23-2018 BID SET
M
P

3
5
3: D2.1
:0 BASEMENT DEMO RCP NORTH
5
8 1
1
0 SCALE: 1/4" = 1'-0" DEMO RCP
2
/
3
2
/
4
CS-10372
1. GENERAL REQUIREMENTS: 6. WOOD AND PLASTICS: 14. CONVEYING SYSTEMS–NOT APPLICABLE
PERMITS: CUSTOM MILLWORK AND CABINETRY: 15. MECHANICAL -ENGINEERED:
GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR ACQUIRING AND PAYINGFOR ALL PERMITS OR ALL CUSTOM MILLWORK SHALL HAVE SHOP DRAWINGS SUBMITTED TO ARCHITECT FOR APPROVAL. ALL DIMENSIONS
FEES THAT ARE REQUIRED. SHALL BE FIELD VERIFIED. CONTRACTOR SHALL REFER TO THE AMERICANWOODWORK INSTITUTE (AWI) QUALITY CODES:
STANDARDS, SECTION 400B –LAMINATE CLAD CABINETS. ALL SURFACES EXPOSED TO VIEW SHALL BE FINISHED ALL HVAC AND PLUMBING MATERIALS AND WORKMANSHIP SHALL BE IN COMPLIANCE WITH GOVERNING CODES
SITE EXAMINATION: PLASTIC LAMINATE. INTERIOR FACES OF DOORS AND DRAWER FRONTS SHALL HAVE A BALANCED BACKER SHEET. AND REGULATIONS AS A MINIMUM STANDARD.
GENERAL CONTRACTOR SHALL VISIT AND EXAMINE THE SITE AND BUILDINGIN EVERY DETAIL AS IT ALL OTHER INTERIOR SURFACES SHALL BE WHITE MELAMINE.
PERTAINS TO THE PROJECT PRIOR TO SUBMITTING A BID PROPOSAL. HVAC AND PLUMBING:
COUNTERTOPS:
AS -BUILT DRAWINGS: PLASTIC LAMINATE OVER PARTICLE BOARD, UNO. PROVIDE 4" HIGH BACKAND SIDE SPLASHES AT ALL COUNTERTOPS MECHANICAL DRAWINGS:
ALL GENERAL CONTRACTORS AND SUBCONTRACTORS ARE TO MAINTAIN ACCURATE REDLINE WHERE SINKS ARE LOCATED. ALL COUNTERTOPS SHALL BE SHOP FABRICATED. LAMINATE COLORS AS NOTED ON REFER TO ENGINEERED HVAC AND PLUMBING DRAWINGS FOR SPECIFICATIONS, CONSTRUCTION INFORMATION
DRAWINGS THROUGHOUT CONSTRUCTION, NOTING ANY CHANGES IN EQUIPMENT, WIRING ROUTE, FINISH SCHEDULE. SUPPORTS ARE TO BE PROVIDED AS REQUIRED AT 3'-0" MAXIMUM O.C. FOR 24" DEEP TOPS AND DETAILS. ANY DISCREPANCIES WITH ARCHITECTURAL DRAWINGS SHOULD BE BROUGHT TO THE IMMEDIATE
SWITCHING LOCATIONS, CONSTRUCTION DETAILS OR ADDENDA ETC. REDLINES ARE TO BE TURNED ATTENTION OF THE ARCHITECT FOR CLARIFICATION.
OVER TO GC AND IN TURN TO ARCHITECT WITH EACH CONTRACTOR'S FINALPAY APPLICATION. THIS BLOCKING:
SHALL INCLUDE ALL CIVIL, LANDSCAPE, ARCHITECTURAL, STRUCTURAL, MECHANICAL, PLUMBING AND BLOCKING SHALL BE INSTALLED IN PARTITIONS AS REQUIRED FOR THE ATTACHMENT TO THE WALL OF SPECIFIED CONTRACTOR IS RESPONSIBLE FOR PROVIDING A FULLY-FUNCTIONAL SYSTEM AND MUST ENSURE THAT ALL
ELECTRICAL INFORMATION. ITEMS. COMPONENTS WORK TOGETHER PER DESIGN INTENT.
ALL MECHANICAL COMPONENTS, WALL (T-STAT, AND OTHER HVAC-RELATED) AND CEILING (LIFE SAFETY, ETC.)
DESIGN -BUILD DRAWINGS: TELEPHONE BACKBOARDS: DEVICES AND CONTROLS MUST BE CLEARLY LABELED, WITH ASSOCIATED MARKINGS INDICATED ON AS-BUILT
PRIOR TO FINAL PAYMENT, THE GENERAL CONTRACTOR OR HIS SUBS SHALLPROVIDE THE ARCHITECT BACKBOARDS USED TO SUPPORT TELEPHONE OR SIMILAR EQUIPMENT SHALL BE 48" X 48" X 3/4" FIRE RESISTIVE DRAWINGS.
WITH AN ELECTRONIC COPY OF ANY DESIGN-BUILD WORK PERFORMED ON THE JOB. THIS SHALL PLYWOOD. ANCHOR TO STUDS AT CEILING HEIGHT. SAND AND PAINT TO MATCH ADJACENT WALLS.
INCLUDE ANY ENGINEERING.
7. THERMAL AND MOISTURE PROTECTION: FIXTURES:
EXISTING MATERIALS: ALL NEW SINKS, TOILETS, DRINKING FOUNTAINS, ETC., ARE TO MEET HANDICAP ACCESSIBILITY STANDARDS AS
ALL DOORS, FRAMES, HARDWARE, CABINETS, SHELVING, OR OTHER ITEMSREMOVED SHALL EITHER ROOF PENETRATIONS: REQUIRED BY THE CURRENT AMERICANS WITH DISABILITIES ACT. THIS INCLUDES HANDLES THAT CAN BE
BE RELOCATED AS INDICATED, PROPERLY DISPOSED OF, OR SALVAGED FORRE-USE. STORE IN A PROVIDE PERMANENT REPAIRS FOR ALL NEW ROOF PENETRATIONS. IF ROOF IS A WARRANTED MEMBRANE SYSTEM, OPERATED WITH A CLOSED FIST AND INSULATION OVER EXPOSED DRAIN AND SUPPLY PIPES.
LOCATION AS DIRECTED BY THE OWNER'S REPRESENTATIVE. REPAIRS TO BE COMPLETED BY AN APPROVED CONTRACTOR TO MAINTAIN ROOF WARRANTIES.
DISCREPANCIES: 8. DOORS AND WINDOWS: FIRE PROTECTION DESIGN / BUILD: N/A
ANY DISCREPANCIES DISCOVERED BY THE GENERAL CONTRACTOR OR HIS SUBS, BETWEEN
DIMENSIONS, OR CONFLICTS UNFORESEEN PREVIOUSLY SHALL BE BROUGHT TO THE IMMEDIATE DOORS, FRAMES AND HARDWARE:
ATTENTION OF THE ARCHITECT FOR CLARIFICATION. SEE DOOR AND HARDWARE SCHEDULE. MATCH BUILDING STANDARDS, UNO. REUSE EXISTING WHERE POSSIBLE, 16. ELECTRICAL -ENGINEERED:
REFINISH AS REQUIRED. ALL NEW LATCHSETS TO BE LEVER HANDLE. SEESEPARATE DOOR HARDWARE SPEC
BUILDING CODE COMPLIANCE: SECTION 087100 BY OWNER'S DOOR HARDWARE CONSULTANT ALSO. CODES:
PERFORM ALL WORK TO COMPLY WITH APPLICABLE BUILDING CODES AND REGULATIONS. WHERE ALL ELECTRICAL MATERIALS AND WORKMANSHIP SHALL BE IN COMPLIANCE WITH GOVERNING CODES AND
EXISTING ELECTRICAL, MECHANICAL, PLUMBING OR OTHER CONDITIONS WERE NOT INSTALLED PER RATED DOORS AND WINDOWS: REGULATIONS AS A MINIMUM STANDARD.
CODE REQUIREMENTS, THE GENERAL CONTRACTOR IS TO PROVIDE ALTERNATE PRICING TO BRING ALL DOORS AND WINDOWS IN RATED FIRE-RESISTIVE WALL CONSTRUCTION SHALL BE FIRE RATED ASSEMBLIES IN
ITEMS INTO CODE COMPLIANCE. ANY ITEMS NEEDING MODIFICATION ARE TO BE CLEARLY NOTED ON ACCORDANCE WITH THE APPLICABLE BUILDING CODE. ALL FURNITURE AND/OR PANEL SYSTEMS/FURNITURE IS TO BE PROVIDED AND INSTALLED BY THE TENANT, UNO.
ANY BIDS. THE CONTRACTOR SHALL PROVIDE ALL ELECTRICAL CONNECTIONS TO TENANT FURNITURE SYSTEMS.
9. FINISHES:
WORK PERFORMED UNDER SEPARATE CONTRACTS: ELECTRICAL DRAWINGS:
THE GENERAL CONTRACTOR SHALL VERIFY WITH THE OWNER'S REPRESENTATIVE ALL WORK THAT IS GENERAL: REFER TO ENGINEERED ELECTRICAL DRAWINGS FOR SPECIFICATIONS, CONSTRUCTION INFORMATION AND
TO BE PERFORMED UNDER A SEPARATE CONTRACT. SEE ROOM FINISH SCHEDULE AND FINISH LEGEND. PROVIDE ALL UNUSED CARTONS OR PORTIONS OF FINISH DETAILS. ANY DISCREPANCIES WITH ARCHITECTURAL OR OTHER DRAWINGSSHALL BE BROUGHT TO THE
MATERIALS TO OWNER’S REPRESENTATIVE. IMMEDIATE ATTENTION OF THE ARCHITECT FOR CLARIFICATION.
LONG LEAD ITEMS:
THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR BEING FAMILIAR WITH THE PROJECT CEILINGS: ALL ELECTRICAL BREAKERS, WALL (T-STAT, HVAC-RELATED AND SWITCH DEVICES) AND CEILING (LIFE SAFETY,
SCHEDULE AND DEADLINES, AND FOR ADVISING THE OWNER'S REP. AND ARCHITECT OF ALL LONG PAINT NEW GYP CEILINGS. RE: FINISH SCHEDULE ETC.) DEVICES MUST BE BE CLEARLY LABELED, WITH ASSOCIATED MARKINGS INDICATED ON AS-BUILT
LEAD TIME ITEMS. ORDER CONFIRMATION SHALL BE SUBMITTED WITH DELIVERY DATES. IT IS THE DRAWINGS.
GC’S RESPONSIBILITY TO FORWARD ALL RELEVANT CONTRACT DOCUMENT INFORMATION TO WALLS: TO THE EXTENT POSSIBLE, ALL ELECTRICAL CONDUIT AND BOXES ARE TO BE SET INTO/FLUSH-MOUNT INTO
SUBCONTRACTORS AND COORDINATE ALL FINISHES AND THEIR INSTALLATION. PROVIDE LEAD TIME PROVIDE WATER-RESISTANT GYPSUM BOARD WHERE CERAMIC TILE OR FRP IS APPLIED. WALLS AND/OR CEILINGS VS SURFACE MOUNT. ANY SURFACE MOUNT APPLICATIONS MUST BE APPROVED BY
ESTIMATES WITH ANY BID PROPOSALS FOR ALL LONG LEAD TIMES. OWNER PRIOR TO INSTALLATION.
PAINTING:
copyright 2017
SUBMITTALS PAINT ALL WALLS WITH TWO COATS MEDIUM GRADE PAINT OVER PRIMER, AS MANUFACTURED BY SHERWIN WILLIAMS DATA CABLING:
These plans and written material are
PROVIDE SUBMITTALS FOR ALL FINISH MATERIALS BEFORE ORDERING, ALLOW FOR ONE WEEK TURN OR EQUAL. PROVIDE A CABLE PATH TO IT/AV CLOSET FROM ALL LOCATIONS REQUIRING DATA CABLING. CONTRACTOR IS instruments of service and are the property
AROUND FOR APPROVALS. ALL PAINTS SHALL BE LOW VOC. RESPONSIBLE TO PROVIDE RACEWAYS AT ALL LOCATIONS. of Intergroup, Inc. and may not be
duplicated, disclosed or reproduced without
TYPICAL WALLS –EGGSHELL FINISH. DATA CABLING WILL BE BY OWNER'S CONTRACTOR, AND IS TO BE COORDINATED WITH GENERAL CONTRACTOR the written consent of the Architect.
SUBSTITUTIONS RESTROOM, SHOWER AND EQUIPMENT ROOM WALLS –SEMI-GLOSS FINISH. OR ITS SUBS. Infringements will be prosecuted.
CONTRACTORS SHALL SUBMIT A WRITTEN REQUEST TO THE ARCHITECT PRIOR TO MAKING A RESTROOM AND SHOWER AREA CEILINGS -SEMI GLOSS EPOXY PAINT.
SUBSTITUTION EXPLAINING THE REASON FOR A SUBSTITUTION. ALL SUBSTITUTIONS MUST BE DOOR FRAMES AND HANDRAILS –SEMI-GLOSS FINISH.
COMPARABLE IN QUALITY AND WORK WITHIN THE CONSTRUCTION SCHEDULE. SUBSTITUTIONS WILL CEILINGS AND SOFFITS –FLAT FINISH. CEILING CONFLICTS:
NOT BE ALLOWED IF SPECIFICALLY NOTED ‘NO SUBSTITUTIONS’ IN THE DRAWINGS OR TOUCH-UP PAINT AFTER THE WORK OF ALL TRADES HAS BEEN COMPLETED. THE GENERAL CONTRACTOR SHALL NOTIFY THE ARCHITECT WHERE CONFLICTS EXISTING BETWEEN
SPECIFICATIONS. MECHANICAL EQUIPMENT, STRUCTURAL ELEMENTS, ETC., AND THE LOCATION OF LIGHT FIXTURES:
WELDING: FLOORS: ELECTRICAL / TELEPHONE CLOSETS:
NO WELDING SHALL BE ALLOWED ON THE PREMISES UNLESS APPROVED BY THE OWNER'S DEMO ALL EXISTING FINISHES AS REQUIRED AND DO FLOOR PREPARATION PER MANUFACTURER OF NEW FLOORING CLOSETS SHALL BE CLOSED UP AT THE END OF EACH DAY'S WORK. ALL DOORS TO EQUIPMENT ROOMS MUST
REPRESENTATIVE. IF WORK IS ALLOWED, A CODE-APPROVED FIRE EXTINGUISHER MUST BE PRESENT PRODUCTS. PROVIDE FLOORING TRANSITIONS AS REQUIRED INCLUDING SCHULTER METAL EDGE PROTECTION AT BE SHUT IF A WORKMAN IS NOT PRESENT.
AT ALL TIMES. ALL TILE FLOORING. ALL TRANSITIONS SHALL MEET ANSI/ADA REQUIREMENTS. PROTECT ALL FLOORING FROM
5
DAMAGE AND SOILING AFTER INSTALLATION. DEMOLITION:
CLEAN UP: ALL CONDUIT, BACK BOXES, SWITCHES, OUTLETS AND THERMOSTATS SHALLBE REMOVED FROM PARTITIONS
T
CLEANING OF EQUIPMENT SHALL BE LIMITED TO THE JANITOR CLOSETS ORAREAS DESIGNATED BY CARPET: BEING DEMOLISHED. AN ATTEMPT BY THE CONTRACTOR SHOULD BE MADE TO REUSE SALVAGED ITEMS
THE OWNER'S REPRESENTATIVE. TRASH SHALL BE REMOVED AND VACUUMING SHALL BE PROVIDED MODULAR CARPET TILE INSTALLATION SHALL BE PER THE MANUFACTURER'SRECOMMENDATIONS WITH LOW VOC WHENEVER POSSIBLE. C
ON A CONTINUING BASIS THROUGHOUT THE CONSTRUCTION PROCESS. THE CONTRACTOR MUST MATERIALS.
N
MAKE ARRANGEMENTS FOR ALL CONSTRUCTION TRASH, ENSURING PROPER CONTAINMENT AND REMOVAL OF EXISTING DEVICES:
DISPOSAL. FINAL CLEANING SHALL INCLUDE (AND NOT LIMITED TO) WINDOWS, SILLS, WINDOW BASE: -LIGHT SWITCHES, ELECTRICAL, TELEPHONE OR OTHER OUTLETS WHICH ARE EXISTING BUT NOT INTENDED FOR
I
COVERINGS, CABINETS, LIGHT FIXTURES, SUPPLY AIR DIFFUSERS AND RETURN AIR GRILLES. PROVIDE 4" RUBBER BASE, UNO. FLAT STYLE OVER CARPET, COVE STYLEOVER VCT. RESTROOM BASE SHALL BE 6” H USE IN THE REMODELED AREA SHALL BE REMOVED AND WALLS PATCHED WITH GYPSUM BOARD AND FINISHED C
TILE, UNO, WITH COVED SCHLUTER TRIM. TO MATCH THE WALL. BLANK COVER PLATES ARE NOT ACCEPTABLE, UNO.
E
PROTECTION OF EXISTING CONSTRUCTION AND ITEMS TO REMAIN: -REMOVE ALL EXCESS CABLE, ELECTRICAL CONDUIT AND OLD / UNUSED MATERIAL FROM ABOVE THE CEILING
THE GENERAL CONTRACTOR SHALL PROTECT ALL EXISTING CONSTRUCTION AND SHALL BE HELD TILE: AREA. R
RESPONSIBLE FOR THE REPAIR OF ANY DAMAGE CAUSED BY HIM OR ANY OFHIS SUB CONTRACTORS. INSTALL ALL TILE IN ACCORDANCE WITH THE TILE COUNCIL OF AMERICA,INC. HANDBOOK FOR CERAMIC TILE
INSTALLATION. PROVIDE GROUT SEALER FOR ALL TILE FLOORS. EXISTING ELECTRICAL DEVICES: P
PROTECTION OF COMMON AREAS: CONTRACTOR TO CHECK AND REPAIR, IF REQUIRED, ALL EXISTING ELECTRICAL OUTLETS SHOWN TO REMAIN.

N/A CONCRETE FLOORS: REPLACE ALL COVER PLATES WITH WHITE COVER PLATES. N
CLEAN ALL CONCRETE FLOORS AFTER COMPLETION OF CONSTRUCTION, USING WATERWASH.
O
ITEMS FURNISHED BY OWNER: FIRE DETECTION / LIFE SAFETY:
N/A 92400. PORTLAND CEMENT PLASTERING:
I
FIRE ALARM DEVICES: T
DEMOLITION: THE GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR FAMILIARIZING HIMSELF WITH PRODUCT DATA: PROVIDE DATA ON PLASTER MATERIALS, CHARACTERISTICSAND LIMITATIONS OF PRODUCTS -PROVIDE FIRE ALARM DEVICES / SYSTEM AS REQUIRED BY FIRE AND / OR BUILDING DEPARTMENTS.
A
EXISTING CONDITIONS RELATED TO DEMOLITION WORK. SPECIFIED. SUBMIT TWO SAMPLES, 12 X 12" ILLUSTRATING FINISH COLOR AND TEXTURE. CONTRACTOR TO VERIFY REQUIREMENTS PRIOR TO SUBMITTING BID PROPOSAL.
FIELD CONDITIONS: DO NOT APPLY PLASTER WHEN SUBSTRATE OR AMBIENTAIR TEMP IS UNDER 50 DEGREES F OR -NEW EQUIPMENT SHALL BE COMPATIBLE WITH EXISTING AND BE INSTALLED IN ACCORDANCE WITH T
HAZARDOUS MATERIALS: OVER 80 DEGREES F. MANUFACTURER'S GUIDELINES.
S
A COPY OF THE ENVIRONMENTAL TESTING REPORT FOR THE FACILITY HAS BEEN PROVIDED TO EXTERIOR STUCCO: PORTLAND CEMENT PLASTER SYSTEM, MADE OF FINISH,BROWN AND SCRATCH COAT AND -ALL NECESSARY CONNECTIONS TO THE FIRE ALARM SYSTEM SHALL BE PROVIDED BY THE ELECTRICAL
GENERAL CONTRACTOR AS A PART OF THE BID. GENERAL CONTRACTOR IS RESPONSIBLE FOR REINFORCING MESH. USE METAL LATH AS PLASTER BASE AT ALL SPECIFIED LOCATIONS. PROVIDE BEADS, SCREEDS CONTRACTOR. B
PROPER, RESPONSIBLE AND PERMITTED ABATEMENT OF ALL HAZARDOUS MATERIALS IDENTIFIED AND AND JOINT ACCESSORIES AS NECESSARY FOR A COMPLETE INSTALLATION.
U
REPORTED IN ENVIRONMENTAL TESTING REPORTS. ALL NEWLY INSTALLED MATERIALS MUST BE VERIFY THE SUITABILITY OF EXISTING CONDITIONS BEFORE STARTING WORK. VERIFY THAT LATH IS FLAT, SECURED LIFE SAFETY:
D
0.000% ASBESTOS CONTENT. TO SUBSTRATE AND JOINT SURFACE PERIMETER ACCESSORIES ARE IN PLACE. MAX VARIATION FROM TRUE ALL LIFE SAFETY EQUIPMENT SHOWN IS FOR LOCATION PURPOSES AND SHALL BE INSTALLED IN COMPLIANCE S A Y
FLATNESS: 1/8 INCH IN 10 FEET. PROVIDE CONTROL JOINTS AS RECOMMENDED BY MANUFACTURER. WITH THE APPLICABLE CODES. O1 T
FIRE WALL PENETRATIONS: R3 N
F
2 U
ASELLA LPEEDN EWTIRTHAT AIONN ASP PTHRROOVEUDG HF IRFIER ES ERAELSAISNTTI VTEO CMOANINSTTARINU CTTHIEO NR ESQHUAILRLE BDE F CIRAEU LRKAETDIN OGR. OTHERWISE 10. SPECIALTIES: ACVA BSLYES PTEAMTHSS: ARE TO BE PROVIDED TO CONTROL LOCATIONS FOR TV, OVERHEAD PROJECTOR AND OTHER F ER80 O
WORK BY OTHERS: TSOEEIL EPTL AANCSC AENSSDO ERLIEEVSA:TIONS EDQEDUIICPAMTEENDT .AND COMMON POWER CIRCUITS ARE TO BE PROVIDED FOR AUDIOVISUAL EQUIPMENT. RI ARK CO OE C
WIRING FOR TELEPHONE AND COMPUTER/DATA IS TO BE PROVIDED BY OWNER'S VENDOR UNDER INSTALLATIONS, CONTROLS AND DEVICES TO BE PROVIDED AND INSTALLED BY OWNER. E PR, H
SEPARATE CONTRACT. FURNITURE AND/OR PANEL SYSTEMS FURNITURE TO BE PROVIDED AND SIGNS: S. E A
INSTALLED BY OWNER'S VENDOR UNDER SEPARATE CONTRACT. CONTRACTOR TO IDENTIFY AND PROVIDE SIGNAGE FOR PERMANENT ROOMS AND SPACES. THESE SIGNS SHALL MEET ALL REQUIREMENTS OF THE KEYCARD READERS: H V P
1N A
COORDINATE ALL REQUIRED ELECTRICAL CONNECTIONS WITH ANY FURNITURE BEING PROVIDED. AMERICAN WITH DISABILITIES ACT (ADA) OF 1992. THIS INCLUDES RAISED LETTERS / NUMBERS AND THE PROPER PROVIDE A 4/S JUNCTION BOX IN THE CEILING ABOVE EACH DOOR DESIGNATED FOR CARD READER FOR WIRE 4
S 6E R
CLASS OF BRAILLE CHARACTERS WITH THE CORRECT FINISH, CONTRAST AND MOUNTING HEIGHTS AND LOCATIONS. ACCESS. FOR AREAS WITH A HARD-LID CEILING, PROVIDE ACCESS HATCH BELOW JUNCTION BOX. 1D A
CONTRACTORS ARE TO USE REASONABLE EFFORT TO IDENTIFY AND APPLY FOR ALL POSSIBLE COORDINATE ANY FINISH STANDARDS WITH TENANT OR OWNER’S REPRESENTATIVE.
ENERGY, WATER AND OTHER RESOURCE REBATES AVAILABLE FOR EQUIPMENTPURCHASED FOR AND PROVIDE A 4/S BOX AT THE READER LOCATION WITH A SINGLE GANG TRIM RING AND 3/4" CONDUIT OR FLEX TO
INSTALLED AT THE PROJECT. REBATES ARE TO BE PASSED ALONG TO THE COUNTY IN THE FORM OF A EXIT SIGNS: ABOVE DOOR J BOX. DATE DESC.
CHANGE ORDER REFLECTING THE CREDIT. REBATES INCLUDE, BUT ARE NOTLIMITED TO WATER PROVIDE A SIGN THAT READS “THIS DOOR MUST REMAIN UNLOCKED DURINGBUSINESS HOURS” AT ALL PRIMARY EXIT
10-23-2017 AS-BUILT
CONSERVATION (SPRINKLERS, BATHROOM FIXTURES, ETC) AND ENERGY (WATER HEATERS, DOORS THAT CANNOT OTHERWISE BE OPENED FROM THE INSIDE BY THE PUSH OF A BAR OR THE TURN OF A HANDLE CABLE PATHS ARE TO BE PROVIDED TO READER LOCATIONS FROM THE CONTROL PANEL. CONTRACTOR IS
INFRARED, LIGHTING, HVAC ETC THROUGH XCEL OR OTHER) WITH A CLOSED FIST. RESPONSIBLE TO PROVIDE RACEWAYS FROM BOX TO ALL LOCATIONS.
11-16-2017 SD PLANS
r 2. SITE WORK–RE: CIVIL & LANDSCAPE DRAWINGS. SHELVING: FOR HARD-CEILING APPLICATIONS, PROVIDE 1" CONDUIT BETWEEN BOX LOCATION AND ACCESS CONTROL 11-22-2017 PROGRESS
o
h SEE PLAN AND ELEVATIONS. PANEL. IN NON-HARD CEILING APPLICATIONS, PLENUM CABLE WITH J-HOOKS WILL BE USED.
12-06-2017 PROGRESS
ut 3. CONCRETE:
A 11. EQUIPMENT–NOT APPLICABLE PROVIDE A 24 VOLT HES DOOR STRIKE. USE MODEL 9600, 1600 OR 5200, MOUNTED OR CUT INTO DOORFRAME, 12-19-2017 PROGRESS
:
y SAW CUTTING: DEPENDING ON DOOR STYLE.
B
SAW CUT EXISTING FLOORS AND REMOVE CONCRETE AS REQUIRED FOR NEW PLUMBING AND 12. FURNISHINGS 01-18-2018 PROGRESS
ELECTRICAL AS SHOWN. POUR NEW 5” 4000 PSI CONCRETE OVER WELL COMPACTED SUBGRADE AT PROVIDE A CABLE PATH FROM READER BOX TO DOOR STRIKE. KEYCARD READER EQUIPMENT TO BE INSTALLED
01-19-2018 NEW STAIR
SAW CUT AREAS. DOWEL INTO EXISTING CONCRETE AS REQUIRED. PROVIDE SMOOTH HARD- EXTERIOR WINDOW COVERINGS: SEE FINISH SCHEDULE AND LEGEND. BY OWNER'S CONTRACTOR.
TROWELED CONCRETE FINISH. SEE STRUCTURAL DRAWINGS. 02-16-2018 75% DD
SURVEILLANCE CAMERAS
4. MASONRY–SEE ELEVATIONS. PROVIDE A CABLE PATH TO CAMERA LOCATIONS FROM WALL RACK IN IT/AV CLOSET. CONTRACTOR IS 02-26-2018 100% DD
13. SPECIAL CONSTRUCTION: RESPONSIBLE TO PROVIDE RACEWAYS FROM BOX TO ALL LOCATIONS.
03-22-2018 L & E SUBMIT
5. METALS
SEE KEYNOTES AND DETAILS. SOUND INSULATION: PROVIDE A 4/S OUTDOOR RATED BOX AT THE CAMERA LOCATIONS SELECTED FOR EXTERIOR MOUNTING. 04-02-2018 50% CD
SHOP DRAWINGS TO INCLUDE PROFILES, SIZES, CONNECTION ATTACHMENTS, REINFORCING, ANY NEW SOUND INSULATION IN NEW WALLS TO BE R-13. UNFACED FIBERGLASS BATT INSULATION WITHIN SPECIFIED
ANCHORAGE, SIZE AND TYPE FASTENERS AND ACCESSORIES. WALLS TO 3 FEET EACH SIDE OF WALL. IN EXISTING WALLS WHICH ARE TO BE SOUND INSULATED, PROVIDE BATT PROVIDE A 2/S BOX AT THE CAMERA LOCATIONS SELECTED FOR INTERIOR MOUNTING IN HARD LID LOCATIONS. 04-12-2018 75% CD
PRIME PAINT ALL STEEL ITEMS. DO NOT PRIME ITEMS IN DIRECT CONTACT WITH CONCRETE AND INSULATION IN THE WALLS. FOR HARD-CEILING APPLICATIONS, PROVIDE 1/2" CONDUIT BETWEEN CAMERA LOCATIONS AND WALL RACK
04-16-2018 90% CD
WHERE FIELD WELDING IS REQUIRED. PREPARE SURFACES TO BE PRIMED IN ACCORDANCE WITH LOCATIONS. EQUIPMENT TO BE INSTALLED BY OWNER'S CONTRACTOR.
SSPC-SP2. CLEAN SURFACES OF RUST, SCALE, GREASE AND FOREIGN MATTER PRIOR TO FINISHING. 04-23-2018 BID SET
PRIME PAINTING: ONE COAT.
M
P

0
4
3: A0.2
0
:
5

8
1
0 SPECIFICATIONS
2
/
3
2
/
4