Digital TV Converter Box - WordPress.com

50 Pages·2008·9.21 MB·English

® Ver.2.5 06/08
simply remarkable™
Digital TV Converter Box
WITH

Caja Convertidora
de TV Digital
CON CAPACIDAD DE PASAR LA SENAL ANALOGICA
DT250
User's Manual Manual del usuario
Important Safety Information EN Important Safety Information Important Safety Information
WARNING Digital Television Transition Notice: This device contains a digital
television tuner, so it should receive digital over the air TV programming, 11. Only use attachments/accessories specified by the manufacturer.
- TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR with a suitable antenna, after the end of full-power analog TV broadcast- 12. Use only with the cart, stand, tripod,
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
- TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ing in the United States on February 17, 2009. After February 17, 2009, a bracket, or table specified by the
television receiver with only an analog broadcast tuner will require a manufacturer, or sold with the apparatus.
converter box to receive full power over-the-air broadcasts with an When a cart is used, use caution when
antenna because of the Nation’s transition to digital broadcasting. moving the cart/apparatus combination
to avoid injury from tip-over.
Analog-only TVs should continue to work as before to receive low power,
13. Unplug this apparatus during lightning storms or when unused for long
Class A or translator television stations and with cable and satellite TV
periods of time.
services, gaming consoles, VCRs, DVD players, and similar products.
The lightning flash with arrowhead WARNING : TO REDUCE THE RISK The exclamation point within an When a converter box is used with an older television receiver, a signal 14. Refer all servicing to qualified service personnel. Servicing is required when
symbol, within an equilateral OF ELECTRIC SHOCK, DO NOT equilateral triangle is intended the apparatus has been damaged in any way, such as power supply cord or
triangle, is intended to alert the user REMOVE COVER (OR BACK). NO to alert the user to the presence splitter might be necessary to continue to receive low-power analog
to the presence of uninsulated USER SERVICEABLE/PARTS of important operating and plug is damaged, liquid has been spilled or objects have fallen into the
"dangerous voltage" within the INSIDE REFER SERVICING TO maintenance (servicing) broadcasts via an antenna. Information about the DTV transition is avail- apparatus, the apparatus has been exposed to rain or moisture, does not
product's enclosure that may be of QUALIFIED SERVICE PERSON- instructions in the literature able from www.DTV.gov or 1-888-CALL-FCC, and from
sufficient magnitude to constitute a NEL. accompanying the appliance. operate normally, or has been dropped.
risk of electric shock to persons. www.dtv2009.gov or 1-888-DTV-2009 for information about subsidized
15. Apparatus shall not be exposed to dripping or splashing and no objects filled
coupons for digital-to-analog converter boxes.
with liquids, such as vases, shall be placed on the apparatus.
16. The main electrical plug is designed to be easily connected or disconnected
CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLI-
ANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 1. Read these instructions. from the power outlet for safe operation.
2. Keep these instructions.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE 3. Heed all warnings.
PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES
4. Follow all instructions.
USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. 5. Do not use this apparatus near water.
6. Clean only with dry cloth.
HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF
7. Do not block any ventilation openings. Install in accordance with the
THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE
DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE manufacturer’s instructions.
INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES: 8. Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
• CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS
polarized plug has two blades with one wider than the other. A grounding type
NEEDED.
• CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP. plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlets.
10. Protect the power cord from being waked on or pinched particularly at plugs,
convenience receptacles, and the pint where they exit from the apparatus.
1
Important Safety Information Important Safety Information EN Important Safety Information
WARNING Digital Television Transition Notice: This device contains a digital
television tuner, so it should receive digital over the air TV programming, 11. Only use attachments/accessories specified by the manufacturer.
- TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR with a suitable antenna, after the end of full-power analog TV broadcast- 12. Use only with the cart, stand, tripod,
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
- TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ing in the United States on February 17, 2009. After February 17, 2009, a bracket, or table specified by the
television receiver with only an analog broadcast tuner will require a manufacturer, or sold with the apparatus.
converter box to receive full power over-the-air broadcasts with an When a cart is used, use caution when
antenna because of the Nation’s transition to digital broadcasting. moving the cart/apparatus combination
to avoid injury from tip-over.
Analog-only TVs should continue to work as before to receive low power,
13. Unplug this apparatus during lightning storms or when unused for long
Class A or translator television stations and with cable and satellite TV
periods of time.
services, gaming consoles, VCRs, DVD players, and similar products.
The lightning flash with arrowhead WARNING : TO REDUCE THE RISK The exclamation point within an When a converter box is used with an older television receiver, a signal 14. Refer all servicing to qualified service personnel. Servicing is required when
symbol, within an equilateral OF ELECTRIC SHOCK, DO NOT equilateral triangle is intended the apparatus has been damaged in any way, such as power supply cord or
triangle, is intended to alert the user REMOVE COVER (OR BACK). NO to alert the user to the presence splitter might be necessary to continue to receive low-power analog
to the presence of uninsulated USER SERVICEABLE/PARTS of important operating and plug is damaged, liquid has been spilled or objects have fallen into the
"dangerous voltage" within the INSIDE REFER SERVICING TO maintenance (servicing) broadcasts via an antenna. Information about the DTV transition is avail- apparatus, the apparatus has been exposed to rain or moisture, does not
product's enclosure that may be of QUALIFIED SERVICE PERSON- instructions in the literature able from www.DTV.gov or 1-888-CALL-FCC, and from
sufficient magnitude to constitute a NEL. accompanying the appliance. operate normally, or has been dropped.
risk of electric shock to persons. www.dtv2009.gov or 1-888-DTV-2009 for information about subsidized
15. Apparatus shall not be exposed to dripping or splashing and no objects filled
coupons for digital-to-analog converter boxes.
with liquids, such as vases, shall be placed on the apparatus.
16. The main electrical plug is designed to be easily connected or disconnected
CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLI-
ANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 1. Read these instructions. from the power outlet for safe operation.
2. Keep these instructions.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE 3. Heed all warnings.
PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES
4. Follow all instructions.
USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. 5. Do not use this apparatus near water.
6. Clean only with dry cloth.
HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF
7. Do not block any ventilation openings. Install in accordance with the
THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE
DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE manufacturer’s instructions.
INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES: 8. Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
• CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS
polarized plug has two blades with one wider than the other. A grounding type
NEEDED.
• CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP. plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlets.
10. Protect the power cord from being waked on or pinched particularly at plugs,
convenience receptacles, and the pint where they exit from the apparatus.
2
Important Safety Information Important Safety Information Important Safety Information EN
WARNING Digital Television Transition Notice: This device contains a digital
television tuner, so it should receive digital over the air TV programming, 11. Only use attachments/accessories specified by the manufacturer.
- TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR with a suitable antenna, after the end of full-power analog TV broadcast- 12. Use only with the cart, stand, tripod,
OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
- TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. ing in the United States on February 17, 2009. After February 17, 2009, a bracket, or table specified by the
television receiver with only an analog broadcast tuner will require a manufacturer, or sold with the apparatus.
converter box to receive full power over-the-air broadcasts with an When a cart is used, use caution when
antenna because of the Nation’s transition to digital broadcasting. moving the cart/apparatus combination
to avoid injury from tip-over.
Analog-only TVs should continue to work as before to receive low power,
13. Unplug this apparatus during lightning storms or when unused for long
Class A or translator television stations and with cable and satellite TV
periods of time.
services, gaming consoles, VCRs, DVD players, and similar products.
The lightning flash with arrowhead WARNING : TO REDUCE THE RISK The exclamation point within an When a converter box is used with an older television receiver, a signal 14. Refer all servicing to qualified service personnel. Servicing is required when
symbol, within an equilateral OF ELECTRIC SHOCK, DO NOT equilateral triangle is intended the apparatus has been damaged in any way, such as power supply cord or
triangle, is intended to alert the user REMOVE COVER (OR BACK). NO to alert the user to the presence splitter might be necessary to continue to receive low-power analog
to the presence of uninsulated USER SERVICEABLE/PARTS of important operating and plug is damaged, liquid has been spilled or objects have fallen into the
"dangerous voltage" within the INSIDE REFER SERVICING TO maintenance (servicing) broadcasts via an antenna. Information about the DTV transition is avail- apparatus, the apparatus has been exposed to rain or moisture, does not
product's enclosure that may be of QUALIFIED SERVICE PERSON- instructions in the literature able from www.DTV.gov or 1-888-CALL-FCC, and from
sufficient magnitude to constitute a NEL. accompanying the appliance. operate normally, or has been dropped.
risk of electric shock to persons. www.dtv2009.gov or 1-888-DTV-2009 for information about subsidized
15. Apparatus shall not be exposed to dripping or splashing and no objects filled
coupons for digital-to-analog converter boxes.
with liquids, such as vases, shall be placed on the apparatus.
16. The main electrical plug is designed to be easily connected or disconnected
CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLI-
ANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. 1. Read these instructions. from the power outlet for safe operation.
2. Keep these instructions.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL
DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE 3. Heed all warnings.
PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES
4. Follow all instructions.
USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. 5. Do not use this apparatus near water.
6. Clean only with dry cloth.
HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF
7. Do not block any ventilation openings. Install in accordance with the
THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR TELEVISION RECEPTION, WHICH CAN BE
DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS ENCOURAGED TO TRY TO CORRECT THE manufacturer’s instructions.
INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES: 8. Do not install near any heat sources such as radiators, heat registers, stoves
or other apparatus (including amplifiers) that produce heat.
• REORIENT OR RELOCATE THE RECEIVING ANTENNA.
• INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
• CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER IS
polarized plug has two blades with one wider than the other. A grounding type
NEEDED.
• CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP. plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlets.
10. Protect the power cord from being waked on or pinched particularly at plugs,
convenience receptacles, and the pint where they exit from the apparatus.
3
3.4 Introduction EN
Thank You for purchasing the DT250 digital TV converter box. It has
been designed to bring you many years of viewing enjoyment from digital
TV broadcasts when connected to a television that does not incorporate a
digital tuner. Enjoy crystal clear quality that is free of ghosting and snowy
interference.
Special Note:
Digital TV broadcasts require an adequate signal strength from your
antenna to provide the best possible viewing experience. Should a
TV broadcast be disrupted by choppy reception or picture stutter,
readjust your antenna or consider a high quality rooftop antenna for
best results.
*Antennaweb.org provides personalized information for choosing
antenna type and orientation for your particular location.
What’s In The Box?
The DT250 digital TV converter
box includes the following:
-Remote Control
-2 AAA Batteries
-AV Cables
- RF Cable
- Owner’s Manual
Specifications
Unit Dimensions: 9” x 6.1” x 1.6”
Net Weight: 2 lbs.
Aspect Ratio: 16:9 / 4:3
Tuner Type/ Range: ATSC/ RF CH 2-69
Resolution: Down converts to 480i
Video Outputs: Composite (1); S Video (1), RF Out with Audio
Video Inputs: RF (1); Smart Antenna (optional)
Audio Outputs: L/R Audio
Energy Standards: <1 Watt While in Sleep Mode
44
Troubleshooting Guide Table of Contents EN
G
etting Started
Check for a possible solution to a symptom before contacting a customer
service representative. We recommend visiting our website at:
Important Safety Information ................................................1-3
www.apexdigitalinc.com for additional updates.
Introduction / What’s In The Box? / Specifications ............4
* Antennaweb.org provides personalized information for choosing antenna
Table of Contents ..................................................................... 5
type and orientation for your particular.
I
nitial Setup Before Use
Symptom Possible Solutions
• Use the automatic scanning function to add the Remote Control Battery Installation....................................6
Cannot receive certain channels
channels not included in memory. Remote Control Functions..................................................7
through the antenna.
• Signal from the TV station may be weak.
Front / Rear Panel Overview.................................................8
• Reposition antenna
Connection to TV.............................................................9,10
• Check connected audio cables are completely inserted. Analog Pass-Through Quick Setup.................................... 1 0
No sound • Correct audio source from your amplifier. Connection to Stereo..........................................................11
• Mute function may be enabled, press Mute on remote. Quick Start Guide................................................................12
• Check connected video and audio cables are completely V
iewing TV Broadcasts
Video noise or choppy picture inserted
• Reposition antenna
Remote Control Overview
• Use the automatic scanning method to add the channels To Mute Sound / Number Buttons / CCD / Menu / Exit........................13
TV blocked at certain channels not included into the memory. Remote Control Overview
• Check parental control settings. Arrow Buttons / Channel / Volume / Recall / Display / Guide ...............14

Remote Control Overview
• Digital TV channel signal may be weak, try another Favorite Channels / Signal / Add & Delete Favorite Channels / MTS...15
No picture channel Zoom Functions ...............................................................16
• Re-connect the antenna or cable wiring. Main Menu
• Make sure the video devices are turned on. Auto Program / Auto Scan of Digital Channels / Manual Channel
• Make sure Auto Scan Channels is completed. Set / Set Password Code.......................................................................17
Main Menu
• The “Text” option is enabled and no text is available. Parental Controls / Closed Caption / Language / Sleep Timer............18
Black box on screen
• Turn off CCD on the remote control. Main Menu
Smart Antenna/ Time Zone/ TV Aspect Ratio/ Reset Default Settings.......19
• Batteries in the remote control may need replacing. Display Menus
No power
• Remove then re-attach AC plug to wall outlet after 30 s. Guide/ Signal/ Volume ...........................................................................20
G
eneral Information
Troubleshooting Guide.....................................................21
Index....................................................................................22
Limited Warranty................................................................23
Legal Notice........................................................................24
20 5 5
Remote Control Battery Installation EN Display Menus
Guide
Remote Control Battery Installation
1 Press to display a guide of program information (if available).
1 Remove the battery compartment cover.
2 Press to display future programming information (if available).
2 Load two fresh “AAA” batteries into the battery compartment.

Make sure the batteries are inserted properly, matching polarity
THETUBE Music Vide. . . THETUBE Music Vide. . . THETUBE Music Vide. . .
by referring to the symbols “+ -” marked in the battery compartment. 12:00PM - 12:30PM 12:00PM - 1:00PM 1:00PM - 1:30PM
3 Close the battery compartment cover.
Music Videos 24/7 (TV-G)
• When replacing batteries, replace both of them. Do not mix new and
used batteries together as battery life will be shortened.

Signal
Weak Good Excellent
Signal Level 57
1 Press SIGNAL to view a linear signal meter that indicates the
Remote Control Operation Range strength of the digital transmission originating from the broadcaster.
Point the remote control unit no more than
20 feet from the remote sensor and within
30º from the front of the unit. Volume
• The operating distance may vary depending on
the brightness in the room.
Remote Sensor Volume 100
Note: 30º
• Do not point bright lights towards the remote control
1 Press Volume + to increase volume.
signal sensor.
• Do not place objects between the remote control 2 Press Volume - to decrease volume.
unit and the remote signal sensor.
• Do not use the remote control unit while operating
It is recommended to adjust volume to the maximum level (100) for best
other units at the same time.
audio results.
6 6 19
Main Menu Remote Control Functions EN
Smart Antenna (Optional)
Main Menu Press MENU on the remote control to
AMuatnou Parl oCghraanmn el Set display the Main menu. 1 MUTE 10 1 P(PoGw. 1e3r) button
Password
Parental Controls 1 Using arrow buttons, highlight 2 Number buttons
Closed Captions 1 2 3
Language English “Smart Antenna” to display the Smart (PG. 13)
Sleep Timer 4 Hours 3 Menu button
Smart Antenna Antenna menu, then press OK.
Time Zone Pacific 2 4 5 6 (PG. 13)
TV Aspect Ratio 4:3
Reset Default Settings Smart Antenna Menu 4 /OK/Vol/Ch
To Move OK To Select EXIT To Exit Change antenna position 1
Automatic Re-adjust position 7 8 9 (PGS. 14, 17-20)
Note: A Smart antenna must be connected Save new position 5 Recall button
(CEA-909 Mode A) to display the
Smart Antenna Menu. To Move OK To Select EXIT To Exit 0 - CCD 11 (PG. 14)
6 Favorite Channel (up)
Time Zone
MENU CH + EXIT (PG. 15)
Press MENU on the remote control to 3 12 7 Signal Strength
Main Menu
Auto Program display the Main menu. (PGS. 15, 20)
MPaasnsuwaol rCdh annel Set 4 VOL - VOL + 8 Favorite Channel (down)
PCalorseendta Cl Capotniotrnosls 1 Using arrow buttons, highlight OK (PG. 15)
Language English 9 Add/Delete Favorites CH
SSlmeeaprt TAimnteern na 4 Hours “Time Zone”. Press arrow button RECALL DISPLAY (PG. 15)
Time Zone Pacific to select your local time zone. See page 5 13 10 Mute bu tton
TRVes Aest pDeecfta Rulat tSioe ttings 4:3 12. (PG. 13)
To Move OK To Select EXIT To Exit 2 Press Exit 6 GCUHID -E 14 11 Closed Caption button
TV Aspect Ratio FAV + ZOOM 15 (PGS. 13, 18)
7 SIGNAL 12 Exit button
MAuation PMreongur am Press MENU on the remote control to 8 FAV - FAV MTS 16 (PG. 13)
Manual Channel Set display the Main menu. 13 Display button
Password 9
Parental Controls 1 Using arrow buttons, highlight “TV (PG. 14)
Closed Captions
Language English Aspect Ratio”. Use arrow button to 14 Guide button
SSlmeeaprt TAimnteern na 4 Hours select the TV display shape connected (PGS. 14, 20)
TTRiVems Aees tZ pDoeencfeta Rulat tSioe ttings P4:a3c ific tSoe teh ipsa ugneit 1(2A.u to, 4:3 or 16:9). ® 15 Z(PoGo. m16 1)b3u tton
To Move OK To Select EXIT To Exit
2 Press Exit 16 MTS button
(PG. 15)
Reset Default Settings
Main Menu Press MENU on the remote control to
Auto Program
Manual Channel Set display the Main menu.
Password
Parental Controls
Closed Captions 1 Using arrow buttons, highlight
Language English
Sleep Timer 4 Hours “Reset Default Settings”. Press OK
Smart Antenna
Time Zone Pacific to reset all settings back to original
TV Aspect Ratio 4:3
Reset Default Settnigs factory status.
To Move OK To Select EXIT To Exit
18 7 7
Front & Rear Panel Overview EN
DT250 (front view)
1 2
1 Power ON / Standby
(Green light - On)
(Red light - Standy)
2 Remote control sensor
DT250 (rear view)
ANTENNA IN TV OUT VIDEO
Analog Pass-CTHhr 3o/u4g &h CH 3 CH 4 S-VIDEO L AUDIO R ANSTMEANRNTA
1 2 3 4 5 6 7
1 Antenna IN (RF Input) 5 S-Video Output
2 TV out (RF Output) 6 Audio (L/R) Output
Channel 3/4 (Analog Pass-through)
3 Channel 3/4 Switch 7 Smart Antenna Connector
(Optional)
4 Composite Video Output
88
Main Menu Connection to TV EN
Press MENU on the remote control to display the Main Menu.
It is strongly recommended to set up your personal preferences in
accordance with the menu options. It is presumed your television
antenna is installed. A rooftop antenna is strongly recommended. Composite (using supplied AV cables)
A uto Program
Main Menu The Main Menu display is for accessing ANTENNA IN TV OUT VIDEO
Auto Program
Manual Channel Set and setting up preferences for the DT250.
PPaasresnwtoarl dC ontrols Analog Pass-CTHhr 3o/u4g &h CH 3 CH 4 S-VIDEO LAUDIOR ANSTMEANRNTA
Closed Captions When Auto Program is highlighted, press yellow
Language English Connect the supplied video (yellow) and
Sleep Timer 4 Hours OK to begin the auto scan program search. white red audio (red & white) cables.
Smart Antenna
TTiVm Aes Zpoencet Ratio P4:a3c ific Note: Auto Program search for digital channels To TV Video Input To view, cycle through your television inputs
Reset DeTfoa uMlot vSee tOtiKn gTso Select EXIT To Exit in your local area may take several minutes (DVTid2e5o0 1is, 2co, nentce)c ttoe ds etole.ct the source that the
to complete.
To TV Audio R, L Input
Auto Scan Digital Channels
The unit will scan and search for all digital
Auto Program Menu
Auto Scan Scanning channels that can be received.
Progress (%) 25
Note: TV reception is dependent on local
terrain, distance from the local area
S Video (using supplied audio cables)
antenna tower and strength of your antenna.
Manual Channel Set (Add / Delete Channels)
ANTENNA IN TV OUT VIDEO
Manual Channel Set Menu
To add or delete digital channels that were
Ch 2-1 KCBS-DT Viewable found during auto scan. Analog Pass-CTHhr 3o/u4g &h CH 3 CH 4 S-VIDEO LAUDIOR ANSTMEANRNTA
Ch 4-1 NBC-4LA Viewable Fav
Ch 4-2 WX-PLUS Not Viewable 1 Using arrow buttons, highlight For better quality, connect with an optional
Ch 4-4 RawNews Viewable “Manual Channel Set”. A menu of available To S-Video Input on TV white red S-Video cable (if your TV has this input).
Ch 5-1 KTLA-DT Viewable Do not connect the yellow video cable when
Ch 5-5 TheTube Viewable Fav channels will display. installing the S-Video cable.
Ch 7-1 KABC-DT Viewable
CCChhh 779---231 KKKCAAABBLCC---DSWTDN VVViiieeewwwaaabbbllleee Fav 2 Porr ensost v i e w taob slee.l ePcrte ass c OhaKn ntoe lc toon bfirem v itehwe a ble To TV Audio R, L Input T(DVoTi d2vei5eo0w 1,is ,c 2cyo,c lneent cteh)c rttooeu dsg ethole .ycot uthr ete sleovuirscioen t hinapt uthtse
change.
To Move OK To Select EXIT To Exit
Note: You can add or delete channels from your Favorite’s
Set Password Code List from this menu. Highlight a channel, then press FAV.
Enter Old Password For access to Parental Controls, enter your
4 digit password. Factory default code:
0000
16 99