Digital Factory Apparel - Epson Edition (NA) - Support

292 Pages·2013·14.14 MB·English

Oct 2013
Installing DTG RIP Pro C6
DTG RIP Pro C6 is provided with a USB security dongle to prevent unauthorized use or
pirating of the software. This device plugs into a standard USB port of the computer, and it is
transparent to other applications. Only DTG RIP Pro C6 is aware of the device.
Connect your orange
dongle BEFORE
installing your DTG
RIP Pro C6
software!
Policy On Lost Or Stolen Dongles
The USB dongle provided with DTG RIP Pro C6 is your proof of purchase. If the
dongle is lost or stolen, then that is equivalent to losing the entire software package,
and a new package of DTG RIP Pro C6 must be purchased.
In the event of a damaged dongle that must be replaced, there is a nominal fee for
EXCHANGING a new dongle for the older dongle, where the older dongle must be
reclaimed by CADlink.
This fee is waived where product is still under warranty.
Regardless, it is recommended that you ensure that your dongle is covered under
your business insurance policy.
Temporary License Files
License files are included with your USB dongle, which are used to confirm the
features within your CADlink products.
If a replacement dongle is being shipped to you, then you will typically be issued
“temporary” license files that will enable you to continue using your CADlink
products.
Temporary license files will cease working after a set criteria, though the expectation
is that your replacement dongle will arrive prior to expiry.
2
Installing DTG RIP Pro C6
Please note that the replacement dongle will be provided with new “permanent”
license files that will replace the temporary license files.
Storing Your License Files
In the event of lost license files, there is a nominal administrative fee for issuing
replacement license files.
The fee is waived if the Free Support period is still active. Otherwise, replacement license
file issues are treated like Tech Support requests.
When CADlink sends you new license files, it is important that you create backups
of the license files, so they can be easily located when re-installing your CADlink
products on new equipment.
In the case of the orange USB flash drive dongle, your license files can be stored on
the dongle itself. When re-installing your CADlink products, license files upon the
dongle will be automatically used.
3
DTG RIP Pro C6 - Epson Edition
Step 1 - Program Installation
The following steps are an overview of installing DTG RIP Pro C6 and further information is
provided within each stage of the install wizard.
1. For an orange-type dongle (i.e., a USB flash drive), connect the dongle NOW.
2. Insert the DTG RIP Pro C6 - Epson Edition CD into your CD-ROM drive. The
install wizard should “auto start”.
If the install wizard fails to auto start, then start the installation process manually:
From the Start menu, choose Run to open the Run dialog.
Click Browse and locate the setup.exe file that is on the CD in the CD-ROM
drive.
Click Open to choose the setup.exe file, and click OK to close the Run
dialog.
3. Proceed with each stage of the install wizard. Instructions are provided at each stage.
4. Proceed to Step 2 - Printer Installation
4
Installing DTG RIP Pro C6
Step 2 - Printer Installation
Now that DTG RIP Pro C6 has been installed, you are ready to install the printer support files.
1. If your DTG RIP Pro C6 package includes a Printers DVD, then insert the DVD
into your DVD-ROM drive.
If a Printers DVD was not included, then make certain that your Internet connection is
active, such that printer support files can be downloaded from CADlink.
2. From the Windows Start menu, choose All Programs >> DTG RIP Pro C6
3. The First Time Setup dialog will prompt for your default layout settings.
4. The Create Queue Wizard will launch (Introduction page), which will be used to install
support files for your printer.
At this time, it is recommended that you install the support files for your primary
production equipment. Later, it will be possible to install support files for additional
machines.
5. From the Introduction page, click Next.
6. From the Printer Defaults page, click the Install Printer button, and follow the steps for
choosing the printer model and installing its printer support files.
To obtain the latest updates for the printer driver, choose to obtain the printer package
from the online server.
5
DTG RIP Pro C6 - Epson Edition
7. After the printer support files have been installed, the wizard will close.
8. DTG RIP Pro C6 is now ready for processing your designs.
9. Go Queue menu >> Manage Queues.
10. Confirm that the Port setting is correct for your printer. If you change the port and are
prompted to change the ports for all your queues, then it is acceptable to click Yes.
11. Click Close to finish editing the Queue Manager dialog.
12. When performing initial tests to confirm output quality, it is recommended that a white T-
shirt queue be chosen.
Note: The Black T-shirt queues have been configured to apply the KnockMeBlackOut feature
automatically. As such, there is no need to manually remove black from an image before
printing to black garment material.
6
Installing DTG RIP Pro C6
13. Proceed to the next section, Sending Jobs to DTG RIP Pro C6
7
Sending Jobs to DTG RIP Pro C6
Once you have installed DTG RIP Pro C6 each of the following workflows is designed to help
you confirm that print and/or cut jobs are being received and processed by DTG RIP Pro C6
correctly. Choose the workflow that best represents the method by which you will use DTG
RIP Pro C6.
Sending Jobs on Same Computer
For these workflows, your design application and DTG RIP Pro C6 have been installed to the same
computer.
Sending Jobs from SignLab
Sending Jobs from PhotoShop
Sending Jobs from Illustrator
Sending Jobs from CorelDraw
Sending Jobs from Other Design Applications
Sending Jobs from Separate Computers
For these workflows, your design application and DTG RIP Pro C6 have been installed on
separate computers.
Importing Designs Directly into DTG RIP Pro C6
Sending Jobs Using a Hot Folder
8
Sending Jobs to DTG RIP Pro C6
Sending Jobs from SignLab®
For the latest versions of SignLab, there is support for printing directly to DTG RIP Pro
C6:
File menu >> Print and Cut - Print to DTG RIP Pro C6 without generating
an underbase. This is suitable for printing to white garment material.
File menu >> Print with Underbase - Automatically generate underbase
information for printing to either black or color garment material.
For older SignLab versions, use the following procedure to add the queue as a print destination
within the Windows Control Panel. Printing from SignLab will use the common Windows File
menu >> Print command.
Note: Using the Windows Control Panel does not permit alpha (transparency) channel data,
which prevents you from defining a white underbase for printing to black or color garment
material. As such, the File >> Print command should only be used when printing to white
garment material (which does not require a white underbase).
In DTG RIP Pro C6
1. From the toolbar, click the Stop Queue button.
2. Choose Queue menu >> Manage Queues.
3. In the Control Panel column, click the Install button, such that the queue is available as
a print destination for other Windows applications.
4. Click the Close button.
In SignLab
5. Prepare the print design on the SignLab workspace.
6. Save the design file, such that the design is not “untitled.”
7. Choose File menu >> Print to open the Print dialog.
8. From the Printer tab, choose the queue that had been designated in step (3).
9. Click OK to accept the Print dialog settings, and the job will be received in Digital
Factory Apparel.
In DTG RIP Pro C6
10. If your queue is set to hold received jobs, then select the job and choose to print from the
Jobs menu.
9
DTG RIP Pro C6 - Epson Edition
10