Design, Development, and Applications of Structural Ceramics, Composites, and Nanomaterials : Ceramic Transactions, Volume 244

208 Pages·2014·10.763 MB·English

by  Singh, Dileep, Mathur, Sanjay, Zhu, Dongming, Lin, Hua-Tay, Kriven, Waltraud M

Design, Development, and
Applications of Structural
Ceramics, Composites,
and Nanomaterials

Design, Development, and
Applications of Structural
Ceramics, Composites,
and Nanomaterials
Ceramic Transactions, Volume 244
A Collection of Papers Presented at the
10th Pacific Rim Conference on
Ceramic and Glass Technology
June 2-6, 2013
Coronado, California
Edited by
Dileep Singh
Dongming Zhu
Waltraud M. Kriven
Sanjay Mathur
Volume Editor
Hua-Tay Lin
The
American S
Ceramic M
Society
WILEY
Copyright © 2014 by The American Ceramic Society. All rights reserved.
Published by John Wiley & Sons, Inc., Hoboken, New Jersey.
Published simultaneously in Canada.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form
or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as
permitted under Section 107 or 108 of the 1976 United States Copyright Act, without either the prior
written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to
the Copyright Clearance Center, Inc., 222 Rosewood Drive, Danvers, MA 01923, [phone], fax
[phone], or on the web at www.copyright.com. Requests to the Publisher for permission should
be addressed to the Permissions Department, John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ
07030, [phone], fax [phone], or online at http://www.wiley.com/go/permission.
Limit of Liability/Disclaimer of Warranty: While the publisher and author have used their best efforts in
preparing this book, they make no representations or warranties with respect to the accuracy or
completeness of the contents of this book and specifically disclaim any implied warranties of
merchantability or fitness for a particular purpose. No warranty may be created or extended by sales
representatives or written sales materials. The advice and strategies contained herein may not be
suitable for your situation. You should consult with a professional where appropriate. Neither the
publisher nor author shall be liable for any loss of profit or any other commercial damages, including
but not limited to special, incidental, consequential, or other damages.
For general information on our other products and services or for technical support, please contact our
Customer Care Department within the United States at [phone], outside the United States at
[phone] or fax [phone].
Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may
not be available in electronic formats. For more information about Wiley products, visit our web site at
www.wiley.com.
Library of Congress Cataloging-in-Publication Data is available.
ISBN: 978-1-118-77094-8
ISSN: 1042-1122
Printed in the United States of America.
1098765432 1
Contents
Preface ix
ENGINEERING CERAMICS AND CERAMIC MATRIX
COMPOSITES: DESIGN, DEVELOPMENT, AND APPLICATIONS
Design and Testing of a C/C-SiC Nozzle Extension Manufactured 3
Via Filament Winding Technique and Liquid Silicon Infiltration
Fabian Breeds, Raouf Jemmali, Heinz Voggenreiter, and Dietmar Koch
Preparation of Zirconium Phosphate Bonded Silicon Nitride Porous 15
Ceramics Reinforced by In-Situ Reacted Silicon Nitride Nanowires
Fei Chen, Feiyu Li, Kaiyu Wang, Qiang Shen, and Lianmeng Zhang
Residual Strains in Structural Stone: A Degradation Mechanism 25
Victoria Shushakova, Edwin R. Fuller, Jr., Florian Heidelbach, and
Siegfried Siegesmund
Joining of SiC/SiC Ceramic Matrix Composites Using REABOND 39
Technology
Michael C. Halbig, Mrityunjay Singh, and Craig E. Smith
Fracture Criterion of Short Carbon Fiber-Dispersed SiC Matrix 53
Composite under Mixed Mode Loading Condition
Ryo Inoue, Hideki Kakisawa, and Yutaka Kagawa
Ceramic Matrix Composites Manufactured by Multistep Densification 61
of Si-O-C Fiber Preform
L. Maille, M. A. Dourges, S. Le Ber, and R. Pailler
Effects of Particle Size and Crystalline Phases Developed after 71
Thermal Shock Cycles on the Physical Properties and Mechanical
Resistance of Cordierite-Mullite Concrete Mixes
Ana Ma Paniagua Mercado, Arturo Mendez Sanchez, Elvia Diaz Valdes, and
Concepcion Mejia Garcia
v
ADVANCED CERAMIC COATINGS: PROCESSING, PROPERTIES,
AND APPLICATIONS
Development of New Observation System used for Deformation 81
Measurement of Ceramic Matrix Composites at High Temperature
Y. L. Dong, H. Kakisawa, and Y. Kagawa
Anti-Reflective Surface Structures in Spinel Ceramic Windows 89
Catalin M. Florea, Lynda E. Busse, Shyam Bayya, Brandon Shaw,
Ishwar D. Aggarwal, and Jas S. Sanghera
Ta-O-N Thin Films Deposited by Low Vacuum Reactive Sputtering 101
Takashi Hashizume, Atsushi Saiki, and Kiyoshi Terayama
Control of Mass-Transfer through Grain Boundaries in a Protective 107
Alumina Layer by Dopant Configuration in Advanced EBCs
Satoshi Kitaoka, Tsuneaki Matsudaira, Masashi Wada, Makoto Tanaka,
Takafumi Ogawa, and Yutaka Kagawa
Fabrication of K Ta 0 Films by Hydrothermal Method and their 119
2 2 6
Optical Property
Atsushi Saiki and Takashi Hashizume
Finite Element Modeling of Compressor Blade Leading Edge Curl, 127
Erosion and Deformation
George M. Slota and Douglas E. Wolfe
GEOPOLYMERS-LOW ENERGY, ENVIRONMENTALLY
FRIENDLY, INORGANIC POLYMERIC CERAMICS
Development of Thai Fly Ash Blended with Rice Husk Ash 145
Geopolymers
Duangrudee Chaysuwan, Chayanee Tippayasam, Pimpawee Keawpapasson,
Parjaree Thavorniti, Thammarat Panyathanmaporn, Sirithan Jiemsirilers, and
Cristina Leonelli
Characterization of Cotton Fabric Reinforced Geopolymer 155
Composites Modified with Portland Cement
T. Alomayri, F. U. A. Shaikh, and I. M. Low
MULTIFUNCTIONAL METAL OXIDE NANOSTRUCTURES
AND HETEROARCHITECTURES FOR ENERGY AND
DEVICE APPLICATIONS
Synthesis of ·γ-ΜηΟΟΗ and ß-Mn0 Nanowires and their 171
2
Electrochemical Capacitive Behavior
Indra B. Singh and Su Moon Park
vi · Design, Development, and Applications of Structural Ceramics, Composites, and Nanomaterials
ADVANCED CHARACTERIZATION AND MODELING OF
CERAMIC INTERFACES
The Effect of Interface and Micro-Crack on Physical Property and 181
Performance of Ceramic Materials
Justin Gao
Author Index 195
Design, Development, and Applications of Structural Ceramics, Composites, and Nanomaterials · vii