Table Of Content

Computer methods in applied mechanics and engineering ELSEVIER Comput. Methods Appl. Mech. Engrg. 117 (1994) 441-442 Author index of Volume 117 Abousleiman, Y. and A.H.-D. Cheng, Boundary element solution for steady and unsteady Stokes flow l- 13 Argyris, J. and L. Tenek, High-temperature bending, buckling, and postbuckling of laminated composite plates using the natural mode method 105-142 Balakrishna, C., L.J. Gray and J.H. Kane, Efficient analytical integration of symmetric Galerkin boundary integrals over curved elements; elasticity formulation 157-179 Beaudoin, A.J., P.R. Dawson, K.K. Mathur, U.F. Kocks and D.A. Korzekwa, Application of polycrystal plasticity to sheet forming 49- 70 Belytschko, T., see Tabbara, M. 211-223 Blacker, T., see Tabbara, M. 211-223 Bwemba, R., see Pasquetti, R. 71- 90 Cheng, A.H.-D., see Abousleiman, Y. l- 13 Crivelli, L., see Farhat, C. 195-210 Dawson, P.R., see Beaudoin, A.J. 49-— 70 Du, H., see Lin, R.M. 381-390 Dutto, L.C., W.G. Habashi and M. Fortin, Parallelizable block diagonal preconditioners for the compressible Navier-Stokes equations 1S— 47 Farhat, C., L. Crivelli and F.X. Roux, Extending substructure based iterative solvers to multiple load and repeated analyses 195-210 Farhat, C., see Franca, L.P. 225-230 Fortin, M., see Dutto, L.C. 1S— 47 Franca, L.P. and C. Farhat, On the limitations of bubble functions 225-230 Gray, L.J., see Balakrishna, C. 157-179 Guerreiro, J.N.C. and A.F.D. Loula, Finite element analysis of transient creep problems 309-329 Habashi, W.G., see Dutto, L.C. 1S— 47 Hansbo, P., Aspects of conservation in finite element flow computations 423-437 Kane, J.H., see Balakrishna, C. 157-179 Kirsch, U., Efficient sensitivity analysis for structural optimization 143-156 Kocks, U.F., see Beaudoin, A.J. 49- 70 Korzekwa, D.A., see Beaudoin, A.J. 49- 70 Leu, L.-J., see Yang, Y.-B. 233-247 Lim, M.K., see Lin, R.M. 381-390 442 Author index of Volume 117 Lin, R.M., M.K. Lim and H. Du, Large deflection analysis of plates under thermal loading 381-390 Loula, A.F.D., see Guerreiro, J.N.C. 309-329 Mathur, K.K., see Beaudoin, A.J. 49-— 70 Miyata, H. and N. Ogawa, Three-dimensional vortical flow past bodies of revolution with conical afterbodies 269-288 Ogawa, N., see Miyata, H. 269-288 Okabe, M., Explicit interpolation formulas for the Bell triangle 411-421 Panagiotopoulos, P.D., see Stavroulakis, G.E. 289-307 Pasquetti, R. and R. Bwemba, A spectral algorithm for the Stokes problem in vorticity—vector potential formulation and cylindrical geometry 71-— 90 Plaxton, S. and J.E. Taylor, Applications of a generalized complementary energy principle for the equilibrium analysis of softening structures 91-103 Roux, F.X., see Farhat, C. 195-210 Semper, B., Semi-discrete and fully discrete Galerkin methods for the vibrating Timoshenko beam 353-360 Soldatos, K.P., see Ye, J.Q. 331-351 Stavroulakis, G.E. and P.D. Panagiotopoulos, A new class of multilevel decomposition algorithms for non-monotone problems based on the quasidifferentiability concept 289-307 Su, J., see Tabarrok, B. 391-410 Swan, C.C., Techniques for stress- and strain-controlled homogenization of inelastic periodic composites 249-267 Sze, K.Y., An explicit hybrid-stabilized 9-node Lagrangian shell element 361-379 Tabarrok, B. and J. Su, Semi-implicit Taylor—Galerkin finite element methods for incompressible viscous flows 391-410 Tabbara, M., T. Blacker and T. Belytschko, Finite element derivative recovery by moving least square interpolants 211-223 Taylor, J.E., see Plaxton, S. 91-103 Tenek, L., see Argyris, J. 105-142 Thaker, A.A., see Wood III, H.G. 181-194 Wood III, H.G. and A.A. Thaker, Computation of cross coupling stiffness in a whirling pump Yang, Y.-B. and L.-J. Leu, Non-linear stiffnesses in analysis of planar frames Ye, J.Q. and K.P. Soldatos, Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels Computer methods mechanics and engineering ELSEVIER Comput. Methods Appl. Mech. Engrg. 117 (1994) 443-446 Subject index of Volume 117 Boundary element methods Boundary element solution for steady and unsteady Stokes flow, Y. Abousleiman and A.H.-D. Cheng 1- 13 Efficient analytical integration of symmetric Galerkin boundary integrals over curved elements; elasticity formulation, C. Balakrishna, L.J. Gray and J.H. Kane 157-179 Dynamics Semi-discrete and fully discrete Galerkin methods for the vibrating Timoshenko beam, B. Semper 353-360 Elasticity Efficient analytical integration of symmetric Galerkin boundary integrals over curved elements; elasticity formulation, C. Balakrishna, L.J. Gray and J.H. Kane 157-179 Techniques for stress- and strain-controlled homogenization of inelastic periodic composites, C.C. Swan 249-267 A new class of multilevel decomposition algorithms for non-monotone problems based on the quasidifferentiability concept, G.E. Stavroulakis and P.D. Panagiotopoulos 289-307 Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels, J.Q. Ye and K.P. Soldatos 331-351 Semi-discrete and fully discrete Galerkin methods for the vibrating Timoshenko beam, B. Semper 353-360 Finite difference methods Three-dimensional vortical flow past bodies of revolution with conical afterbodies, H. Miyata and N. Ogawa 269-288 Aspects of conservation in finite element flow computations, P. Hansbo 423-437 Finite element and matrix methods High-temperature bending, buckling, and postbuckling of laminated composite plates using the natural mode method, J. Argyris and L. Tenek 105-142 Efficient sensitivity analysis for structural optimization, U. Kirsch 143-156 Computation of cross coupling stiffness in a whirling pump, H.G. Wood III and A.A. Thaker 181-194 Finite element derivative recovery by moving least square interpolants, M. Tabbara, T. Blacker and T. Belytschko 211-223 On the limitations of bubble functions, L.P. Franca and C. Farhat 225-230 Non-linear stiffnesses in analysis of planar frames, Y.-B. Yang and L.-J. Leu 233-247 Finite element analysis of transient creep problems, J.N.C. Guerreiro and A.F.D. Loula 309-329 Semi-discrete and fully discrete Galerkin methods for the vibrating Timoshenko beam, B. Semper 353-360 An explicit hybrid-stabilized 9-node Lagrangian shell element, K.Y. Sze 361-379 444 Subject index of Volume 117 411-421 Explicit interpolation formulas for the Bell triangle, M. Okabe 423-437 Aspects of conservation in finite element flow computations, P. Hansbo Parallelizable block diagonal preconditioners for the compressible Navier—Stokes equations, L.C. Dutto, W.G. Habashi and M. Fortin 15— 47 Application of polycrystal plasticity to sheet forming, A.J. Beaudoin, P.R. Dawson, K.K. Mathur, U.F. Kocks and D.A. Korzekwa 49- 70 Fluid mechanics Boundary element solution for steady and unsteady Stokes flow, Y. Abousleiman and A.H.-D. Cheng l- 13 Parallelizable block diagonal preconditioners for the compressible Navier—Stokes equations, L.C. Dutto, W.G. Habashi and M. Fortin 15— 47 A spectral algorithm for the Stokes problem in vorticity—vector potential formulation and cylindrical geometry, R. Pasquetti and R. Bwemba 71- 90 Computation of cross coupling stiffness in a whirling pump, H.G. Wood III and A.A. Thaker 181-194 On the limitations of bubble functions, L.P. Franca and C. Farhat 225-230 Three-dimensional vortical flow past bodies of revolution with conical afterbodies, H. Miyata and N. Ogawa 269-288 423-437 Aspects of conservation in finite element flow computations, P. Hansbo Incompressible and near incompressible media A spectral algorithm for the Stokes problem in vorticity—vector potential formulation and cylindrical geometry, R. Pasquetti and R. Bwemba 71- 90 Semi-implicit Taylor—Galerkin finite element methods for incompressible viscous flows, B. Tabarrok and J. Su 391-410 Matrix calculus High-temperature bending, buckling, and postbuckling of laminate’ -omposite plates using the natural mode method, J. Argyris and L. Tenek 105-142 Modern computer architecture Parallelizable block diagonal preconditioners for the compressible Navier-Stokes equations, L.C. Dutto, W.G. Habashi and M. Fortin Nonlinear mechanics Application of polycrystal plasticity to sheet forming, A.J. Beaudoin, P.R. Dawson, K.K. Mathur, U.F. Kocks and D.A. Korzekwa 49- 70 Applications of a generalized complementary energy principle for the equilibrium analysis of softening structures, S. Plaxton and J.E. Taylor 91-103 High-temperature bending, buckling, and postbuckling of laminated composite plates using the natural mode method, J. Argyris and L. Tenek 105-142 Non-linear stiffnesses in analysis of planar frames, Y.-B. Yang and L.-J. Leu 233-247 A new class of multilevel decomposition algorithms for non-monotone problems based on the quasidifferentiability concept, G.E. Stavroulakis and P.D. Panagiotopoulos 289-307 Finite element analysis of transient creep problems, J.N.C. Guerreiro and A.F.D. Loula 309-329 Numerical solution procedures Parallelizable block diagonal preconditioners for the compressible Navier-Stokes equations, L.C. Dutto, W.G. Habashi and M. Fortin 1S— 47 A spectral algorithm for the Stokes problem in vorticity—-vector potential formulation and cylindrical geometry, R. Pasquetti and R. Bwemba 71-— 90 Subject index of Volume 117 Efficient analytical integration of symmetric Galerkin boundary integrals over curved elements; elasticity formulation, C. Balakrishna, L.J. Gray and J.H. Kane 157-179 Computation of cross coupling stiffness in a whirling pump, H.G. Wood III and A.A. Thaker 181-194 Extending substructure based iterative solvers to multiple load and repeated analyses, C. Farhat, L. Crivelli and F.X. Roux 195-210 Finite element derivative recovery by moving least square interpolants, M. Tabbara, T. Blacker and T. Belytschko 211-223 On the limitations of bubble functions, L.P. Franca and C. Farhat 225-230 A new class of multilevel decomposition algorithms for non-monotone problems based on the quasidifferentiability concept, G.E. Stavroulakis and P.D. Panagiotopoulos 289-307 Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels, J.Q. Ye and K.P. Soldatos 331-351 Semi-discrete and fully discrete Galerkin methods for the vibrating Timoshenko beam, B. Semper 353-360 Optimization and design of structures Efficient sensitivity analysis for structural optimization, U. Kirsch 143-156 Plasticity Application of polycrystal plasticity to sheet forming, A.J. Beaudoin, P.R. Dawson, K.K. Mathur, U.F. Kocks and D.A. Korzekwa 49- 70 Applications of a generalized complementary energy principle for the equilibrium analysis of softening structures, S. Plaxton and J.E. Taylor 91-103 Techniques for stress- and strain-controlled homogenization of inelastic periodic composites, C.C. Swan 249-267 Shells and plates High-temperature bending, buckling, and postbuckling of laminated composite plates using the natural mode method, J. Argyris and L. Tenek 105-142 Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels, J.Q. Ye and K.P. Soldatos 331-351 An explicit hybrid-stabilized 9-node Lagrangian shell element, K.Y. Sze 361-379 Explicit interpolation formulas for the Bell triangle, M. Okabe 411-421 Solution of differential equations Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels, J.Q. Ye and K.P. Soldatos 331-351 Large deflection analysis of plates under thermal loading, R.M. Lin, M.K. Lim and H. Du 381-390 Solutions of ordinary and partial differential equations Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels, J.Q. Ye and K.P. Soldatos 331-351 Stability in structural mechanics High-temperature bending, buckling, and postbuckling of laminated composite plates using the natural mode method, J. Argyris and L. Tenek 105-142 Structural mechanics Extending substructure based iterative solvers to multiple load and repeated analyses, C. Farhat, L. Crivelli and F.X. Roux 195-210 446 Subject index of Volume 117 Finite element derivative recovery by moving least square interpolants, M. Tabbara, T. Blacker and T. Belytschko Techniques for stress- and strain-controlled homogenization of inelastic periodic composites, C.C. Swan Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels, J.Q. Ye and K.P. Soldatos Semi-discrete and fully discrete Galerkin methods for the vibrating Timoshenko beam, B. Semper An explicit hybrid-stabilized 9-node Lagrangian shell element, K.Y. Sze Subsonic flow Semi-implicit Taylor—Galerkin finite element methods for incompressible viscous flows, B. Tabarrok and J. Su 391-410 Systems of linear and nonlinear simultaneous equations High-temperature bending, buckling, and postbuckling of laminated composite plates using the natural mode method, J. Argyris and L. Tenek 105-142 Extending substructure based iterative solvers to multiple load and repeated analyses, C. Farhat, L. Crivelli and F.X. Roux 195-210 Thermal effects and thermodynamics High-temperature bending, buckling, and postbuckling of laminated composite plates using the natural mode method, J. Argyris and L. Tenek 105-142 Transport phenomena Aspects of conservation in finite element flow computations, P. Hansbo 423-437 Viscoelastic and viscoplastic media Finite element analysis of transient creep problems, J.N.C. Guerreiro and A.F.D. Loula 309-329 Viscous flow A spectral algorithm for the Stokes problem in vorticity—-vector potential formulation and cylindrical geometry, R. Pasquetti and R. Bwemba 71- 90 Three-dimensional vortical flow past bodies of revolution with conical afterbodies, H. Miyata and N. Ogawa 269-288 Workhardening structures Applications of a generalized complementary energy principle for the equilibrium analysis of softening structures, $. Plaxton and J.E. Taylor 91-103