Building Automation - Apice

44 Pages·2009·8.02 MB·English

INDEX
6 Outline of LonWorks® Technology
7 Section 1- Access Control on LonWorks® Technology
8 APICE products for LonWorks® Access Control
13 Section 2- Building Automation
14 APICE products for LonWorks® Access Control
20 SPEGA products for Building Automation
19 Products for measurement
30 PLC in LonWorks® technology
31 Section 3- LonWorks® Network Infrastructure and Configuration Software
32 LOYTEC products for network infrastructure
36 Configuration Software and LonWorks® network maintenance
37 Section 4- Application Examples
38 Access Control on LonWorks® technology
39 Building Automation for offices
40 Hotel System
41 References

IOL222 Door controller based on LonWorks technology. Can manage two identifiers
even when different (i.e. readers, keyboards, etc.) and, thanks to two ON/OFF
inputs, it is possible to verify door status (open or closed) and connect a manual
button for output request. The two relay outputs are normally used to manage
the electric lock (or access automatism) and to activate a local alarm device. The
node communicates with the LonWorks network via a FTT-10 78 Kbps transceiver.
Identification data is forwarded to an APICE LonServer APICE device which contains
a database of authorised cards. One LonServer device is required for each 8 doors
to be controlled.
070-101 IOL222 Door controller. Manages 1 door with Clock/Data reader.

Main technical features - IOL222
Power supply 12 VDC +/- 10%
Consumption 60 mA @ 12 V, max.140 mA (with active LED and relays)
Inputs 2 ON/OFF inputs
Outputs 2 relay outputs (with NO contact protected with VDR 47 V); 2
LED outputs with common reference
Reader Inputs 2 Clock/Data inputs, magstripe format
Reader Power Supply 5 VDC
Tamper device Container opening. Connection to readers. External input
Transceiver LonWorks FTT-10 78 Kbps
Processor Neuron Chip 3120E2
Clock Frequency 10 MHz
Service PIN and LED service
Oper. Temperature 0 - 50°C
Container type Plastic container
Installation Wall or panel
Dimensions 140 x 125 x 30 mm (HxWxD)
IOL332 Two door controller based on LonWorks technology. A high performance
device which can manage 1 or 2 doors with both Wiegand and Clock/Data
identification devices. Two relays control locks (or automatisms) on each door and
a third relay can manage a local alarm device. Two clean contact inputs can collect
door status or other signals. The IOL332 controller works together with an external
access control manager, such as an APICE LonServer device, or with a local list of
100 enabled cards. This local list can also be used as a security list in the event of
failure or disconnection from the external database manager. One LonServer device
is required for each 8 doors to be controlled. The controller must be installed in a
protected location.
IOL332 Door controller. Manages 2 doors with Clock/Data and Wiegand read-
070-110
ers. Power supply 12 VDC. FTT-10 network.
IOL332 Door controller. Manages 2 doors with Clock/Data and Wiegand read-
070-110E
ers. Power supply 15..36 VDC or 12..24 VAC. FTT-10 network
8
Main technical features - IOL332
Power supply 12 VDC +/- 20% or 12-24 VAC/15-36 VDC
Consumption At rest 35 mA @ 12 V, 150 mA with activated LEDs and relays
Inputs 2 ON/OFF inputs; 1 Tamper input
Outputs 3 relay outputs 1A 47 V max; 4 OC NPN outputs with optional resistance
Reader Inputs 2 ISO Clock/Data or Wiegand format inputs
Reader Power Supply Selectable 5 VDC or 12 VDC, protected against short circuits
Tamper device Container opening. Connection to readers. External input
Transceiver LonWorks FTT-10 78 Kbps
Processor Neuron Chip 3150
Clock Frequency 10 MHz
Service PIN and LED service
Oper. Temperature 0 - 50°C
Container type Plastic container
Installation Wall or panel
Dimensions 140 x 125 x 30 mm (HxWxD)
LONSERVER Powerful, reliable control unit for access management, operating
with LonWorks technology. Each LonServer has an autonomous memory for
26,000 enabled users over 8 managed doors, including all access levels, permitted
timetables, expirations, etc. In less than 80 ms this unit can receive, elaborate
and restore transit authorisation on a card. The recorded history contains the last
4,000 registered events at all times. Interfaces with AxWin management software
but can also manage, without the help of a special PC, all typical functions of an
Access Control system, first verifying all access rights and then recording event
results or any alarm or abnormality. Can also be used as a Time Attendance
terminal in the version with a display, keyboard and reader. Power supply 9-36
VDC.FTT-10 network.
LONSERVER Access control manager for 8 doors. Without keyboard, display or
070-160
reader.
LONSERVER-TD Access control manager for 8 doors and identification device with
070-162
keyboard and display, without reader.
LONSERVER-TDLM Access control manager for 8 doors and identification device
070-164
with keyboard, display and magnetic card reader.
LONSERVER-TDLP Access control manager for 8 doors and identification device with
070-165
keyboard, display and EM transponder reader.
LONSERVER-TDLHID Access control manager for 8 doors and identification device
070-168
with keyboard, display and PROX HID transponder reader.
9
Main technical features - LONSERVER
Power supply 9-36 VDC
Consumption 70 mA @ 12 V
Transceiver LonWorks FTT-10 78 Kbps
Processor Neuron Chip 3150
Host Processor 32 bit microcontroller
Clock Frequency 10 MHz
Oper. Temperature 0 - 50°C
Installation Wall or panel
Dimensions 150 x 90 x 45 mm (HxWxD)
APB MANAGER Antipassback Manager is a powerful “host-node” based
on LonWorks technology which manages Antipassback between multiple
LonServers. Allows management of antipassback policy without the use of a
supervisor, freeing the PC system from normal operation. It is necessary for
systems with complex Antipassback management which require information
exchanges between multiple LonServer nodes. The APB MANAGER in fact
receives transit information from any LonServer, processes Antipassback policy
and sends it to all others to enable/disable the appropriate readers. The model
managing 5 LonServers coordinates Antipassback between 40 doors while the
model which manages up to 10 LonServers controls up to 80 doors. Multiple
APB MANAGERS can be installed on the same system.
APB MANAGER with 5 LonServer management and 256 user types.
070-170
Power supply 9-36 VDC. FTT-10 network.
APB MANAGER with 10 LonServer management and 64 user types.
070-175
Power supply 9-36 VDC. FTT-10 network.
Main technical features - APB MANAGER
Power supply 9-36 VDC
Consumption 70 mA @ 12 V
Transceiver LonWorks FTT-10 78 Kbps
Processor Neuron Chip 3150
Host Processor 32 bit microcontroller
Clock Frequency 10 MHz
Oper. Temperature 0 - 50°C
Installation Wall or panel
Dimensions 150 x 90 x 45mm (HxWxD)
10