BR5000-ADA Waist High ADA Gate - Controlled Access, Inc.

32 Pages·2012·10.08 MB·English

by  Brian Sherba

Controlled Access Inc. – BR5000-ADA Service and Installation Manual
BR5000-ADA Waist High ADA Gate
Service & Installation Manual
Note: Successful turnstile installation depends on reading this manual.
Important Note: Please keep this service manual after installation. If an installation is done by a
construction company or outside installer, please pass this book along to the end user. This
book is required for maintenance, troubleshooting, and repairs.
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: [phone] | Fax: [phone] / Phone: [phone] | Fax: [phone]
Web: http://www.controlledaccess.com | E-mail: [email protected]
Important Electrical Information
Installation of the control head mechanism into the turnstile requires a grounding-type
outlet receptacle installed inside of the frame or cabinet through the provided conduit
access points.
To reduce the risk of electric shock, this equipment has a grounding type plug that has a
third (grounding) pin. This plug will only fit into a grounding type outlet. If the plug does
not fit into the outlet, contact a qualified electrician to install the proper outlet. Do not
change this plug in any way.
Additionally, the MS2-H50 power supply from this appliance must be grounded to the
frame of the turnstile. Utilize the green colored grounding screw threaded into the
grounding tab located near the power supply along with the provided grounding wire from
the power supply to ensure the equipment is proper grounded.
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: [phone] | Fax: [phone] / Phone: [phone] | Fax: [phone]
Web: http://www.controlledaccess.com | E-mail: [email protected]
The Brute Series Waist-High
™ BR5000-ADA
ADA Swing Gate • Interior and Exterior Application
The Brute™ Series units operate
reliably with high traffic volumes
where cost is an important
consideration. Heavy 7-gauge
carbon steel cabinets can be
interfaced with optional LCD
counters, card readers, push
button and wireless remotes. This
product is the ADA compliant sister
unit to our BR5500 tripod turnstiles.
BR5000-ADA
Available in: Standard colors are
black, gray and almond,
but custom colors are
available and can be
Black Gray Almond quoted upon request.
We’re the #1 Choice of Top Architects,
Security Pros and Engineers
For two decades, Controlled Access has been the globally trusted name in
pedestrian control equipment. Made in Ohio and shipped worldwide, we are
the first choice of leading architects, facility managers, security consultants
and engineers. Whether your project requires high security full-height
turnstiles, waist-high units, or matching ADA accessible gates, Controlled Access
is the secure choice. And, we’re experienced in access control systems, from
card readers to biometric scanning, to give you the power to control access.
Built in the USA
C ONTROLLED ACCESS, INC. The Leader in Pedestrian Access Control
1636 West 130th Street | Brunswick, Ohio 44212 | Ph: 330.273.6185 | Fax: [phone] | Toll-Free Ph: 800.942.0829 | Toll-Free Fax: [phone]
E-mail: [email protected] | www.controlledaccess.com
0214
The Brute Series Waist-High
™ BR5000-ADA
ADA Swing Gate • Interior and Exterior Application
Applications:
This versatile line of turnstiles is made for years of reliable service (and offers many
options) where cost is an important consideration.
Product Features: Operation:
Materials and Finishes: 6500 Series Control Head, featuring:
• Lid: Our signature 304 stainless steel / • Auto-indexing (self-centering) with adjustable
No. 4 satin finish hydraulic shock suppression
• Cabinet: Your choice of designer powder coat • Hardened tool steel locking bars, cam and
colors to match any décor. Black is standard. roller assemblies
Design & Construction: • Permanently lubricated bearings
• Designed for secure and reliable operation • Your choice of manual or electronic control
with aesthetics in mind on both directions
• Cabinet upper and lower shells are constructed • Nearly universal integration to any number
with rigid (7 gauge) carbon steel of access control systems
• Cover is constructed with (14 gauge) 304 • Your choice on each electronic direction
stainless steel, No. 4 satin finish of locking or unlocking on power failure
• Arm assembly constructed with 1 5/16” Options:
(33mm) diameter, (12 gauge) stainless steel
• Bidirectional key overrides
Dimensions are approximate.
• Hub 4 1/2” (114mm) o.d. also made from
• Daylight visible indicator lights
stainless Electrical Specifications:
• 8 digit key resettable LCD counter with
• Minimal exposed hardware Input Voltage: 100-240 VAC
seven year lithium battery
Input Current: 1.3 - .55 A
Measurements: • Variable arm lengths (up to 40”) Frequency: 50/60 Hz
• Height: 37” (939.8mm) • Signage brackets
Storage Temperature: -4 to 158˚F
• Width: 20.125” (511.1mm) • Straight arm (instead of U-arm) Operating Temperature: 32 to 122˚F
• Depth: 10.375 (263.5mm) • Additional options available on request Operating Voltage: 24VDC
• Base: 4.375 (111.1mm) Warranty: Operating Current: 1.2 A (typical)
Units are warranted against defects in materials Standards and Codes:
and workmanship for a period of one year from Austenitic stainless steel:
date of delivery. See warranty information ASTM A240, A249, A276
for specific details. Hot rolled steel:
AISI C-1020, AISI C-1018
Hot dipped galvanizing:
ASTM A-143, ASTM A-153-80
Have an older style Brute cabinet
Stainless steel fasteners:
that you need to match?
ASTM A-320
Just ask!
American Welding Society (AWS)
Standard D 1.1
The 6500 series control head is
certified to conform to UL Standard
325 & UL Subject 2593
Controlled Access, Inc. is
a registered ISO 9001:2008
company
C ONTROLLED ACCESS, INC. The Leader in Pedestrian Access Control
1636 West 130th Street | Brunswick, Ohio 44212 | Ph: 330.273.6185 | Fax: [phone] | Toll-Free Ph: 800.942.0829 | Toll-Free Fax: [phone]
E-mail: [email protected] | www.controlledaccess.com
0214
Controlled Access Inc. – BR5000-ADA Service and Installation Manual
Pre-Installation Planning
Although the BR5000-ADA is simple to install, there are a few things to be familiar with in order to
simplify the process.
The cabinet has conduit access built into the floor plate and bottom side of the head plate. Additionally,
although the cabinet itself can be used as a template for concrete anchors, the diagram below indicates
the location of the anchor holes and conduit access.
If your BR5000-ADA is set up for electronic control, a grounded outlet receptacle will need
to be installed inside of the cabinet.
Access control integration is built into the controls. To activate and unlock a direction, you must provide
a normally open dry momentary contact of 1 second or less. If the output timer from your access control
system is too long, the unit may allow more than one person through the unit.
If you have purchased a digital counter for your BR5000-ADA, there are multiple ways it can be wired,
depending on the operation of the rest of the controls. Manual turnstiles utilize a limit switch and top
cam to initiate a count; where as electronic turnstiles utilize the 6789 control board to count upon
activation.
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: [phone] | Fax: [phone] / Phone: [phone] | Fax: [phone]
Web: http://www.controlledaccess.com | E-mail: [email protected]
Controlled Access Inc. – BR5000-ADA Service and Installation Manual
Concrete Anchor Installation
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: [phone] | Fax: [phone] / Phone: [phone] | Fax: [phone]
Web: http://www.controlledaccess.com | E-mail: [email protected]
Controlled Access Inc. – BR5000-ADA Service and Installation Manual
BR5000-ADA Installation
1. Floor should be level within 1/16”. If not, you must shim underneath the cabinet. Installing
turnstile to uneven surface can cause operational issues.
2. Place template or cabinet in its installation location and use a center punch to mark the 4
anchor holes.
3. Drill 1/2” holes into concrete 4” deep and remove all concrete dust from the holes.
4. Place the turnstile back in its correct position and install concrete anchors as indicated on page
6.
5. Wire turnstile or handicapped gate with 1 10 volt minimum 2 amp GFI circuit to terminals
provided. These must be grounded. Most card readers provide normally open contacts which
are activated upon acceptance of card presented. These contacts are to be wired to terminals.
See electrical drawings supplied.
6. Bolt the arm assembly to the arm adaptor with the provided 5/16 carriage bolts.
7. Please give owner all maintenance and parts manuals supplied with this equipment.
Security Begins With Controlled Access
1636 W. 130th Street, Brunswick, OH 44212
Toll Free Phone: [phone] | Fax: [phone] / Phone: [phone] | Fax: [phone]
Web: http://www.controlledaccess.com | E-mail: [email protected]

9