ATAS Wall Panel Specifications

28 Pages·2011·6.45 MB·English

Big enough to cover the world,
small enough to serve your needs
The headquarters of ATAS International, Inc. is located in Allentown, consistent with continued growth, enhanced customer and
PA. In this modern manufacturing facility, ATAS produces quality employee satisfaction, and harnessing growth responsibility.
metal roofing, wall, energy-efficient building envelope technology
and ceiling systems. Accessories include soffit and facade panels, ATAS also functions sustainably to keep costs down for customers,
valleys, ridge caps, gable and eave trim and rainware. ATAS’ to promote energy efficiency and because it is the right thing
production team consistently manufactures precise products, meeting to do. Upgrades to equipment and lighting, stringent recycling
customer specifications and designs. other manufacturing facilities in programs, reusing skids and other materials, and reducing the use
mesa, AZ, and maryville, TN, enable ATAS to serve customers worldwide. of non-biodegradable objects are a few steps we have taken to
embrace a sustainable lifestyle.
ATAS has experienced drafting and technical personnel to assist
you with the design, development and implementation of your Seminars
project. Prompt order processing with the Rapid Response system • Knowledge is Key to Success
saves both time and expense for our valued customers. we are • Understanding Metal Roofing
able to provide our customers with the industry-leading service • Transpired Solar Collectors
that has been synonymous with ATAS for years. • Energy Efficient Building Envelope Technology
• Test methods related to metal roofing- the test and the reality!
To offer information on a 24-hour basis, ATAS has developed
several programs for your convenience. Product information is Training seminars are available for metal roofing installers
available at www.atas.com or by e-mailing [email protected]. A to expand their experience and knowledge with metal roof
specification program is also available at www.atas.com. Simply installation for residential and commercial applications. AIA/CES
answer a few questions about the project, and allow the program seminars for Architects are available throughout the country. For
to create customized three-part specs for you in seconds! more detailed information, visit www.atas.com or call 610.395.8445
our belief in quality craftsmanship and prompt service has allowed Cost Evaluation
us to expand. In growing, we hope to provide our current and In evaluating the cost of any roof system, the installation,
future customers with unequaled product quality, courtesy and maintenance and repair cost over the life of the roof must be
fast order processing. call us, and let us prove ourselves. considered. Independent studies have shown, in most cases, a
metal roof system is the most economical when all these factors
ATAS operations have been certified to the ISo 9001:2008 with are taken into account. This applies to both new construction and
design International Quality System Standard in all locations. This reroofing.
certification assists ATAS with maintaining industry leadership
utilizing a customer focus and quality improvements that are Visit www.atas.com for the latest product updates!
2 www.ATAS.com
MonarchTM Batten Seam
monarch is a “batten” style panel with an integral batten and seam. Dutch Seam is a continuous standing seam panel with an integral
The Batten Seam and the lock are an integral part of the panel. A seam. with the lock and seam an integral part of the panel, there are
vertical “leg” is formed as an extra water barrier. A clip is hooked no seam caps to install. This prevents “blows-off” or “creeping” of the
over the leg; this allows for the expansion of the system. The panels cap or seam. mechanical field seaming of the panel is not required.
interlock with each other. All clips and fasteners required to install Just snap the panel onto the previously installed panel, fasten the clip
the panel are concealed with the batten of the consecutive panel. and the panel is in place. The Dutch Seam is a structural panel and
Continuous panel lengths eliminate cross seams. Easy one-piece can be fastened directly to purlins or solid substrate. The minimum
installation lowers on-site labor cost. No extra caps or strips to install. slope of the roof is 2:12. A flat roof can be converted to the correct
Also, no special equipment is required to zip or seam the panels slope with the simple addition of a lightweight truss system.
together.
SKU: MRD110, MRD150, MRD194
SKU: MRB120, MRB160 Gauge: .032, .040 Aluminum
Gauge: .032, .040, .050* Aluminum 24, 22* ga. metallic coated Steel
24, 22*, ga. metallic coated Steel, 24* ga. 55% Al-Zn alloy coated Steel with
24* ga. 55% Al/Zn alloy coated Steel with acrylic coating
acrylic coating 16*, 20* oz. copper
Panel width: 12”, 16” .027 Zinc* (MRD110 Only)
(Stiffening ribs standard, specify without) Panel width: 11”, 15”, 19 1/4”
Panel Length: cut to customer specifications with a (Stiffening ribs standard, specify without)
minimum of 4’-0”, maximum to transportation Panel Length: cut to customer specifications with a
limitations and/or product and project design minimum of 2’-0”, maximum to transportation
considerations limitations and/or product and project design
Batten Height: 2” considerations
Texture: Embossed, Smooth Seam Height: 1 1/2”
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF Texture: Embossed, Smooth
colors: choice of 30 standard colors Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Anodized: Clear, Dark Bronze colors: choice of 30 standard colors
Accessories: A complete line of trims available in matching Anodized: Clear, Dark Bronze
colors, gauge and finish or as specified. Accessories: A complete line of trims available in matching
minimum Slope: 2:12 colors, gauge and finish or as specified.
*Subject to minimum quantities and lead time minimum Slope: 2:12
Inquire for availability *Subject to minimum quantities and lead time
Inquire for availability
12”, 16”
11”, 15”, 19 ¼”
2” Stiffening Ribs 1 ½” Stiffening Ribs
www.ATAS.com 3
TM
2 3/8” Field-Lok Panel 2” Field-Lok Panel
The Field-Lok, FLS Series, Standing Seam panel features a Triple-Lok The FLR series is a mechanical field seamed panel system. The double
design that has been proven to outperform all roof systems in testing for
locked structural panel can meet severe load requirements. For
wind uplift resistance. The Field-Lok incorporates a “hooked in” standing
aesthetic reasons or personal preference, the panel can be seamed
seam with a double folded design to resist seam failure between
supports, inhibit sidelap unfurling or unzipping, and add structural with a single fold displaying a broader seam. The single fold meets
integrity to the roof system. Installed with “floating” clips, Field-Lok the needs for a structural panel, while providing the practically of a
accommodates for expansion and contraction of the roof system. weathertight roof. The panel system is installed with a sliding clip.
The adjacent panel conceals the fasteners and clips. A power- driven
mechanical seamer is used to interlock the panels at the site. Field-Lok
has the flat pan/vertical rib profile preferred by architects for superior
performance with traditional appearance. Because of its strength, SKU: FLR154, FLR195, FLR999
watertightness, and aesthetics, Field-Lok meets the new stringent Gauge: .032 Aluminum,
building codes and specifications and is suitable for a wide range of 24, 22* ga. metallic coated Steel,
climatic conditions. The extra high locked standing seam adds structural
24* ga. 55% Al-Zn alloy coated Steel with
integrity to the roof system.
acrylic coating
Panel Width: 15 ¼”, 19 1/2”, Custom
SKU: FLS137, FLS180
(Plank ribs standard, specify without)
Gauge: .032, .040 Aluminum,
Panel Length: cut to customer specifications with a
24, 22* ga. metallic coated Steel,
24* ga. 55% Al-Zn alloy coated Steel with acrylic minimum of 4’-0”, maximum to transportation
coating limitations and/or product and project design
Panel width: 13 ¾”, 18” considerations
(Stiffening ribs standard, specify without) Seam Height: 2”
Panel Length: cut to customer specifications with a minimum of Texture: Smooth
4’-0”, maximum to transportation limitations and/ Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
or product and project design considerations colors: choice of 30 standard colors
Seam Height: 2 3/8”
Anodized: clear
Texture: Smooth
Accessories: A complete line of trims available in matching
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
colors, gauge and finish or as specified
colors: choice of 30 standard colors
Minimum Slope: 1/2:12
Accessories: A complete line of trims available in matching
optional sealant is available
colors, gauge and finish or as specified.
Minimum Slope: 1/2:12 *Subject to minimum quantities and lead time
optional sealant is available Inquire for availability
*Subject to minimum quantities and lead time
Inquire for availability
13 ¾”, 18"
Optional
Seam Sealant
2 3⁄8” Stiffing Ribs
13 ¾”, 18" 15 ¼", 19 ½"
Optional
Seam Sealant
2 3⁄8” Optional Striations (Specify) 2" Optional Plank Ribs
Seam Sealant
4 www.ATAS.com
TM
1 ½” Field-Lok Panel 1” Field-Lok Panel
Installed with a sliding clip, the 1 1/2” Field-Lok panel is a non-structural 1” Field-Lok Panel with 1” high seam FLL is a non-structural double-
double locked roof panel. The FLm series is mechanically seamed in locked roof panel. FLL has passed industry performance tests in
the field and provides the traditional appearance of standing seam. accordance with UL 580 class 90. It can be curved (FLX) for special
Plank ribs are standard. The FLm series may also be curved, but plank accents, or over entrances and walkways. The panel system is installed
ribs are not available when the panels are curved. contact ATAS for with either a sliding or fixed clip.
radius limitations.
SKU: FLL135, FLL175, FLL217, FLL999
SKU: FLM125, FLM165, FLM207, FLM999 Gauge: .032 Aluminum,
Gauge: .032 Aluminum, 24 ga metallic coated Steel
24 ga. metallic coated Steel, 24* ga. 55% Al-Zn alloy coated Steel with
24* ga. 55% Al/Zn alloy coated Steel acrylic coating
with acrylic coating Panel Width: 13 1/2”, 17 1/2”, 21 3/4” , Custom
Panel Width: 12 1/2”, 16 1/2”, 20 3/4” , Custom (Plank ribs standard, specify without)
(Plank ribs standard, specify without) Panel Length: cut to customer specifications with a
Panel Length: cut to customer specifications with a minimum of 4’-0”, maximum to transportation
minimum 4’-0”, maximum to transportation limitations and/or product and project design
limitations and/or product and project design considerations
considerations Seam Height: 1”
Seam Height: 1 1/2” Texture: Smooth
Texture: Smooth Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF colors: choice of 30 standard colors
colors: choice of 30 standard colors Accessories: A complete line of trims available in matching
Accessories: A complete line of trims available in matching colors, gauge and finish or as specified.
colors, gauge and finish or as specified. minimum Slope: 2:12 depending on climate conditions
minimum Slope: 2:12 depending on climate conditions optional sealant is available
optional sealant is available *Subject to minimum quantities and lead time
*Subject to minimum quantities and lead time Inquire for availability
Inquire for availability
Both 1 1/2” and 1” Field-Lok Panels can be curved. Contact ATAS for radius
limitations. For aesthetic reasons or personal preference, the panel can
be seamed with a single fold displaying a broader seam. Plank Ribs not
available when curved, see Curved Standing Seam in this catalog for more
information.
12 ½”, 16 ½”, 20 ¾”
13 ½”, 17 ½”, 21 ¾”
1 ½” Plank Ribs 1” Plank Ribs
www.ATAS.com 5
Curved Standing
Seam ®
curved Standing Seam, is a convex panel with concealed clip and Advanta, a simulated dimensional shingle, is easily installed from eave
fastener system. mechanically field locked seam gives increased to ridge with concealed fasteners. The shingle has prepunched direct
weathertightness. This system is available in 1 1/2” and 1” seam heights. fastening points, with a four-way interlock for weathertightness. It is
contact ATAS for radius limitations. lightweight, allowing installation over an existing roof without the
need for tear-off and disposal*. Typical applications for Advanta are
SKU: FLX roofs on either commercial or residential buildings; also suitable for
Gauge: .032 Aluminum, walls and mansards.
24, 22* ga. metallic coated Steel,
24* ga. 55% Al-Zn alloy coated Steel with *Subject to local codes
acrylic coating
Panel Width: 1” high: 13 1/2”, 17 1/2”, 21 3/4” SKU: HAS300
1 1/2” high: 12 1/2”, 16 1/2”, 20 3/4” Gauge: 29 ga. metallic coated Steel
Panel Length: cut to customer specifications with a 16* oz. copper
minimum of 2’-0”, maximum to transportation Panel Size: 12” by 36” exposed
limitations and/or product and project design Texture: Embossed
considerations Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Seam Height: 1” or 1 1/2” colors: 10 standard colors: mission Red, Forest Green,
curve: convex Char Brown, Sierra Tan, Slate Grey, Rocky Grey,
minimum Radius: 28’-0” (Steel) Redwood, Bone White, Coppertone, Brite Red
16’-0” (Aluminum) 6 designer colors ADVANTA®AMERICANA
Texture: Smooth SERIES: Carolina Pine Green, Cape Cod
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF Grey, Grand Canyon Red, Kodiak Island Brown,
colors: choice of 30 standard colors Mojave Desert Tan and Smokey Mountain Grey
Accessories: A complete line of trims available in matching Accessories: A complete line of trims available in matching
colors, gauge and finish or as specified. colors, gauge and finish or as specified.
minimum Slope: 2:12 depending on climate conditions Fasteners: concealed fasteners
optional Sealant is available for all panels. minimum Slope: 3:12
*Subject to minimum quantities and lead time *Subject to minimum quantities and lead time
Inquire for availability Inquire for availability
36”
1” @ 13 ½”, 17 ½”, 21 ¾” widths
1 ½” @ 12 ½”, 16 ½”, 20 ¾” widths 12"
1”, 1 ½”
6 www.ATAS.com
PC™ SNAP-ON SYSTEM
The Pc systems consist of two parts, the flat panel and a separate CURVED PC™ SYSTEM
seam or batten. The seam is snapped over the clips concealing the
fastening system. with the batten style, the system is installed with a
Curved PC System (PCX, PCV) is a standing seam panel consisting of
spacer clip and is snapped in place. The Pc systems are not structural
a snap-on-seam with concealed clip and fastener system. The panel
panels and must be applied to a solid substrate. Pc panels can be
comes in 11 ¼”, 12 5/8”, 14 5/8” (copper only) and 15 ¼” standard widths.
used for tapered and curved installations.
custom widths are available. The panel system can be curved in
concave or convex styles.
PC Pan SKU: PCP110, PCP120, PCP150, PCP999
PC Seam SKU: PCS114
Curved PC SKU: PCX, PCV
PC Batten SKU: PCB001, PCB002
Gauge: .032 or .040 Aluminum,
PC Copper SKU: PCP147
24 ga. metallic coated Steel
Gauge: .032 and .040 Aluminum,
16 oz. copper
24 ga. metallic coated Steel,
Pan Width: 11 ¼”, 12 5/8”, 14 5/8” *, 15 ¼”
16 oz. copper (PcP147 only)
*copper and Anodized only
Pan Width: 11 ¼”, 12 5/8”, 14 5/8”*, 15 ¼” , Custom
Panel Length: cut to customer specifications with a minimum
*copper and Anodized only
of 3’-0”, maximum to transportation limits and/
Pan Length: cut to customer specifications with a
or product and project design considerations
minimum of 2’-0”, maximum to transportation
Seam Height: 1” (Batten not available)
limits and/or product and project design
curve: convex or concave
considerations
minimum Radius: 2’-9” (PcX)
Seam Height: Standing Seam 1”,
4’-0” (PCV)
Batten Seam 1” x 1 1/2”
Texture: Embossed, Smooth
And 2” x 1 1/2”
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Available: Straight, Tapered, convex or concave
colors: choice of 30 standard colors
Texture: Embossed, Smooth
Anodized: Clear, Dark Bronze
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Accessories: A complete line of trims available in matching
colors: choice of 30 standard colors
colors, gauge and finish or as specified.
Anodized: Clear, Dark Bronze
minimum Slope: 3:12
Accessories: A complete line of trims available in matching
Inquire for availability
colors, gauge and finish or as specified.
minimum Slope: 3:12
Inquire for availability
2
0
0
B
C
1 P 2”
CB00 Ba1tt” en Batten 114 Standing cstuarnvdeidn 1g” sheiagmh
P PCS seam concave &
1”
convex
1 ¼” 1 ¼”
Batten Seam Styles Standing Seam Styles
www.ATAS.com 7
Rumba Shake
™ TM
and
TM
Rumba Shake, a Bermuda style roof panel, is easily installed from eave Permashake panels simulate the look of wood grained shingles,
to ridge with concealed fasteners and clips. It is lightweight, allowing without the maintenance problems associated with such a roof.
installation over an existing roof without the need for tear-off and metal shake panels have the advantage of fire resistance and will
disposal*. Typical applications for the Rumba Shake are roofs on not crack, split, warp, or rot. Panels are installed from eave to ridge
either commercial or residential buildings with a minimum slope of with concealed fasteners. Panels should be staggered for a natural
4:12; also suitable for walls, and mansards. appearance. The interlocking modules are fastened with an anchor
clip and lock system. Typical applications for Permashake are
*Subject to local codes decorative accents for mansards, with a recommended minimum
slope of 12:12 or greater. Typical applications for Permashake II are
SKU: HBS090 commercial or residential buildings with a minimum slope of 4:12.
Gauge: .032, .040* Aluminum,
24, 22* ga. metallic coated Steel, SKU: HPS106 (Permashake), HPS300 (Permashake II)
16* oz. copper; Gauge: .032 Aluminum (HPS106 only)
24*, 22* 55% Al-Zn alloy coated Steel with 29 ga. Metallic Coated Steel (HPS300 only)
acrylic coating Panel Size: 60” by 10” (Permashake)
Panel Size: 9” by 11’-6” or 19’-6” 36” by 12” (Permashake II)
Texture: Smooth Texture: wood Grain
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
colors: choice of 30 standard colors Colors: HPS106: 30 standard colors
Anodized: Clear, Dark Bronze HPS300: 6 standard colors: Forest Green,
Accessories: A complete line of trims available in matching Redwood, Sierra Tan, Slate Grey, Smokey
colors, gauge and finish or as specified. mountain Grey and carolina Pine Green.
Fasteners: concealed fasteners and clips Accessories: A complete line of trims available in matching
minimum Slope: 4:12 colors, gauge and finish or as specified.
*Subject to minimum quantities and lead time Fasteners: concealed fasteners and clips
Inquire for availability Minimum Slope: HPS106: 12:12 or greater for decorative accents
HPS300: 4:12
Inquire for Availability
36"
1
2"
1"
Permashake II (HPS300)
60”
9 ¾”
9”
10”
Optional Sealant 1”
1”
Permashake (HPS106)
8 www.ATAS.com
®
Standing Seam Shingles are elegant in their style, and feature a four- castleTop is a diamond-shaped flat metal tile for a unique roof
way interlock to insure weathertightness. These panels are installed appearance. Easy install from eave to ridge with concealed fasteners.
with concealed fasteners from eave to ridge, over solid substrate. An expanded polystyrene backer board gives strength to allow for
Transverse seams are staggered to provide a historic standing seam light foot traffic during installation. In some cases, the shingles may
appearance. The metal roof allows for snow and ice to slide off be applied directly over the existing roof, eliminating the need for
easily, thus preventing damage from freeze and thaw cycles. Typical tear-off and disposal*. Different colors may be combined to create
applications for the Standing Seam Shingle are mansards, entryways, interesting patterns. castleTop may be used for commercial or
commercial and residential roofs with a minimum recommended residential roof applications with a recommended minimum slope of
slope of 4:12. 3:12; also suitable for walls, and mansards.
*Subject to local codes
SKU: HSS164 (36”), HSS165 (60”)
Gauge: .032 Aluminum, 16 oz. copper SKU: HCT160
Panel Size: 16” by 36” or 60” Gauge: .032 Aluminum, .028 Zinc, 16 oz. copper
Texture: Smooth Panel Size: 15 ¾” by 15 ¾”; actual exposure is
Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF 13 1/2” by 13 1/2”
colors: choice of 30 standard colors Texture: Embossed (Aluminum only),
Accessories: A complete line of trims available in matching Smooth (copper and Zinc only)
colors, gauge and finish or as specified. Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Fasteners: concealed fasteners & clips colors: choice of 30 standard colors (Aluminum only)
minimum Slope: 4:12 Anodized: Clear, Dark Bronze
Inquire for availability Accessories: A complete line of trims available in matching
colors, gauge and finish or as specified.
Fasteners: concealed Fasteners
minimum Slope: 3:12
Inquire for availability
15
¾”
36” or 60” Lengths
16”
Nom.
www.ATAS.com 9
®
Granutile is simulated modular low tile panel with a unique ScanRoof, a scalloped tile with a Northern European flair, is an easy-
3-dimensional granular surface. The panel is installed ridge to eave, to-install metal roof panel. The panels are structural, practical and
and is easily stocked and handled. The panel is coated with crushed economically efficient for any project. ScanRoof is the ideal roofing
stone chips with an acrylic over-glaze. Granutile can be used for re- system to stand up against mother Nature’s storms, typhoons,
roofing or for new construction over a batten system. It is lightweight, hurricanes, damaging winds and driving rains. The panel is installed
allowing installation over an existing roof without the need of tear-off horizontally, from eave to ridge, on a solid deck. ScanRoof has a 2”
and disposal*. The airspace between roof deck and panel will increase high integral Z purlin allowing for air flow between the panel and
the insulation value, consequently lowering utility bills. Typical substrate. It is lightweight, allowing installation over an existing
applications for Granutile are commercial and residential roofing with roof without the need for tear-off and disposal*. Typical applications
a recommended minimum slope of 3:12, also suitable for mansards. for ScanRoof are commercial and residential roofing with a
recommended minimum slope of 3:12; also suitable for mansards.
*Subject to local codes
*Subject to local codes
SKU: HGT144
Actual Size: 46” x 16” with a 7 tile design repeat. SKU: SCP163
Exposure: 43.75” x 14.5”; 4.4 sq. ft./panel Gauge: 24 ga. metallic coated Steel
Gauge: Base metal is 26 ga. 55% Al-Zn alloy coated Panel Width: 21” (16 1/2” exposed)
Steel with AZ50 metallic coating Panel Length: 13’-10” (13’-2” exposed)
Granules: colored ground stone sealed with a clear polymer. Texture: Smooth
colors: mahogany, charcoal, Granite, Forest Green, Finish: KYNAR 500® PVDF or HYLAR 5000® PVDF
Midnight Blue, Mission Red, Terra Cotta, colors: 26 standard colors
Timberwood, weathered wood, Slate Premium finishes are not available
Accessories: A complete line of trims available in matching Accessories: A complete line of trims available in matching
colors, gauge and finish or as specified. colors, gauge and finish or as specified.
minimum Slope: 3:12 minimum Slope: 3:12
Inquire for availability Inquire for availability
13'-10" OVERALL
13'-2" COVERAGE
46” 7 7⁄8”
L
L
A
R
E
V E
16” 21" O 16 ½” VERAG
O
C
10 www.ATAS.com