analog-digital conversion

1138 Pages·2013·35.58 MB·English

ANALOG-DIGITAL CONVERSION

Walt Kester

Editor

a
Acknowledgments:

Thanks are due the many technical staff members of Analog Devices in Engineering,
Marketing, and Applications who provided invaluable inputs during this project.
Particular credit is give to the individual authors whose names appear at the beginning of
their material.

Special thanks go to Brad Brannon, Wes Freeman, Walt Jung, Bob Marwin, Hank
Zumbahlen, and Scott Wayne who reviewed the material for accuracy.

Dan Sheingold graciously provided material from his classic 1986, Analog-Digital
Conversion Handbook.

A thank you also goes to ADI management, for encouragement and support of the project.

Judith Douville compiled the index and also offered many helpful manuscript comments.

Walt Kester, March 2004
ADI Central Applications Department
Direct questions to [email protected], with a subject line of "Analog-Digital Conversion"

Copyright © 2004 By Analog Devices, Inc.
Printed in the United States of America

ISBN 0-916550-27-3

All rights reserved. This book, or parts thereof, must not be reproduced in any form without permission of
the copyright owner. Information furnished by Analog Devices, Inc. is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices, Inc. for its use.

Analog Devices, Inc. makes no representation that the interconnections of its circuits as described herein
will not infringe on existing or future patent rights, nor do the descriptions contained herein imply the
granting of licenses to make, use, sell equipment constructed in accordance therewith. Specifications are
subject to change without notice.
ANALOG-DIGITAL CONVERSION

1. Data Converter History
2. Fundamentals of Sampled Data Systems
3. Data Converter Architectures
4. Data Converter Process Technology
5. Testing Data Converters
6. Interfacing to Data Converters
7. Data Converter Support Circuits
8. Data Converter Applications
9. Hardware Design Techniques
I. Index

DATA CONVERTER HISTORY

ANALOG-DIGITAL CONVERSION

(cid:139) 1. Data Converter History
1.1 Early History
1.2 Data Converters of the 1950s and 1960s
1.3 Data Converters of the 1970s
1.4 Data Converters of the 1980s
1.5 Data Converters of the 1990s
1.6 Data Converters of the 2000s
2. Fundamentals of Sampled Data Systems
3. Data Converter Architectures
4. Data Converter Process Technology
5. Testing Data Converters
6. Interfacing to Data Converters
7. Data Converter Support Circuits
8. Data Converter Applications
9. Hardware Design Techniques
I. Index
ANALOG-DIGITAL CONVERSION
DATA CONVERTER HISTORY
1.1 EARLY HISTORY

CHAPTER 1
DATA CONVERTER HISTORY
Walt Kester

Chapter Preface

This chapter was inspired by Walt Jung's treatment of op amp history in the first chapter
of his book, Op Amp Applications (Reference 1). His writing on the subject contains
references to hundreds of interesting articles, patents, etc., which taken as a whole, paints
a fascinating picture of the development of the operational amplifier—from Harold
Black's early feedback amplifier sketch to modern high performance IC op amps.

We have attempted to do the same for the history of data converters. In considering the
scope of this effort—and the somewhat chaotic and fragmented development of data
converters—we were faced with a difficult challenge in organizing the material. Rather
than putting all the historical material in this single chapter, we have chosen to disperse
some of it throughout the book. For instance, most of the historical material related to
data converter architectures is included in Chapter 3 (Data Converter Architectures)
along with the individual converter architectural descriptions. Likewise, Chapter 4 (Data
Converter Process Technology) includes most of the key events related to data converter
process technology. Chapter 5 (Testing Data Converters) touches on some of the key
historical developments relating to data converter testing.

In an effort to make each chapter of this book stand on its own as much as possible, some
of the historical material is repeated in several places—therefore, the reader should
realize that this repetition is intentional and not the result of careless editing.

SECTION 1.1: EARLY HISTORY

It is difficult to determine exactly when the first data converter was made or what form it
took. The earliest recorded binary DAC known to the authors of this book is not
electronic at all, but hydraulic. Turkey, under the Ottoman Empire, had problems with its
public water supply, and sophisticated systems were built to meter water. One of these is
shown in Figure 1.1 and dates to the 18th Century. An example of an actual dam using
this metering system was the Mahmud II dam built in the early 19th century near Istambul
and described in Reference 2.

The metering system used reservoirs (labeled header tank in the diagrams) maintained at
a constant depth (corresponding to the reference potential) by means of a spillway over
which water just trickled (the criterion was sufficient flow to float a straw). This is
illustrated in Figure 1.1A. The water output from the header tank is controlled by gated
binary-weighted nozzles submerged 96 mm below the surface of the water. The output of
the nozzles feeds an output trough as shown in Figure 1.1B. The nozzle sizes
corresponded to flows of binary multiples and sub-multiples of the basic unit of
1 lüle (= 36 l/min or 52 m3/day). An eight-lüle nozzle was known as a "sekizli lüle," a
1.1
ANALOG-DIGITAL CONVERSION
four lüle nozzle a "dörtlü lüle," a ¼ lüle nozzle a "kamuş," an eighth lüle a "masura," and
a thirty-second lüle a "çuvaldiz." Details of the metering system using the binary
weighted nozzles are shown in Figure 1.1C. This is functionally an 8-bit DAC with
manual (rather than digital, no doubt) input and a wet output, and it may be the oldest
DAC in the world. There are probably other examples of early data converters, but we
will now turn our attention to those based on more familiar electronic techniques.

NOZZLES WATER
96mm INPUT
WATER HEADER FROM
SPILLWAY LEVEL TANK DAM
96mm
HEADER
OUTPUT
TANK
TROUGH
NOZZLES
(A) HEADER SYSTEM: Note-The spillway
(B) SECTIONAL VIEW OF METERING SYSTEM
and the nozzles need different outlets
(C) TOP VIEW OF
METERING SYSTEM
DETAILS SHOWING
8 BINARY
BINARY WEIGHTED HEADER WATER
WEIGHTED
NOZZLES TANK INPUT
NOZZLES
Adapted from: FROM
Kâzim Çeçen, "Sinan'sWater Supply DAM
System in Istambul," IstambulTechnical University / OUTPUT
IstambulWater and Sewage Administration, TROUGH
IstambulTurkey, 1992-1993, pp. 165-167.
SPILLWAY

Figure 1.1: Early 18th Century Binary Weighted
Water Metering System

Probably the single largest driving force behind the development of electronic data
converters over the years has been the field of communications. The telegraph led to the
invention of the telephone, and the subsequent formation of the Bell System. The
proliferation of the telegraph and telephone, and the rapid demand for more capacity, led
to the need for multiplexing more than one channel onto a single pair of copper
conductors. While time division multiplexing (TDM) achieved some measure of
popularity, frequency division multiplexing (FDM) using various carrier-based systems
was by far the most successful and widely used. It was pulse code modulation (PCM),
however, that put data converters on the map, and understanding its evolution is where
we begin.

The material in the following sections has been extracted from a number of sources, but
K. W. Cattermole's classic 1969 book, Principles of Pulse Code Modulation (Reference
3), is by far the most outstanding source of historical material for both PCM and data
converters. In addition to the historical material, the book has excellent tutorials on
sampling theory, data converter architectures, and many other topics relating to the
subject. An extensive bibliography cites the important publications and patents behind the
major developments. In addition to Cattermole's book, the reader is also referred to an
1.2
DATA CONVERTER HISTORY
1.1 EARLY HISTORY
excellent series of books published by the Bell System under the title of A History of
Engineering and Science in the Bell System (References 4 through 8). These Bell System
books are also excellent sources for background material on the entire field of
communications.

The Early Years: Telegraph to Telephone

According to Cattermole (Reference 3), the earliest proposals for the electric telegraph
date from about 1753, but most actual development occurred from about 1825-1875.
Various ideas for binary and ternary numbers, codes of length varying inversely with
probability of occurrence (Schilling, 1825), reflected-binary (Elisha Gray, 1878—now
referred to as the Gray code), and chain codes (Baudot, 1882) were explored. With the
expansion of telegraphy came the need for more capacity, and multiplexing more than
one signal on a single pair of conductors. Figure 1.2 shows a typical telegraph key and
some highlights of telegraph history.

(cid:139) Telegraph proposals: Started 1753
(cid:139) Major telegraph development: 1825 - 1875
(cid:139) Various binary codes developed
(cid:139) Experiments in multiplexing for increased channel
capacity
(cid:139) Telephone invented: 1875 by A. G. Bell while
working on a telegraph multiplexing project
(cid:139) Evolution:
(cid:122) Telegraph: Digital
(cid:122) Telephone: Analog
(cid:122) Frequency division multiplexing (FDM): Analog
(cid:122) Pulse code modulation (PCM): Back to Digital

Figure 1.2: The Telegraph

The invention of the telephone in 1875 by Alexander Graham Bell (see References 9 and
10) was probably the most significant event in the entire history of communications. It is
interesting to note, however, that Bell was actually experimenting with a telegraph
multiplexing system (Bell called it the harmonic telegraph) when he recognized the
possibility of transmitting the voice itself as an analog signal.

Figure 1.3 shows a diagram from Bell's original patent which puts forth his basic
proposal for the telephone. Sound vibrations applied to the transmitter A cause the
membrane a to vibrate. The vibration of a causes a vibration in the armature c which
induces a current in the wire e via the electromagnet b. The current in e produces a
corresponding fluctuation in the magnetic field of electromagnet f, thereby vibrating the
receiver membrane i.
1.3
ANALOG-DIGITAL CONVERSION

Extracted from U.S. Patent 174,465,
Filed February 14, 1876, Issued March 7, 1876

Figure 1.3: The Telephone

The proliferation of the telephone generated a huge need to increase channel capacity by
multiplexing. It is interesting to note that studies of multiplexing with respect to
telegraphy led to the beginnings of information theory. Time division multiplexing
(TDM) for telegraph was conceived as early as 1853 by a little known American
inventor, M. B. Farmer; and J. M. E. Baudot put it into practice in 1875 using rotating
mechanical commutators as multiplexers.

In a 1903 patent (Reference 11), Willard M. Miner describes experiments using this type
of electromechanical rotating commutator to multiplex several analog telephone
conversations onto a single pair of wires as shown in Figure 1.4. Quoting from his patent,
he determined that each channel must be sampled at

"… a frequency or rapidity approximating the frequency or average frequency of the
finer or more complex vibrations which are characteristic of the voice or of articulate
speech, …, as high as 4320 closures per second, at which rate I find that the voice with
all its original timbre and individuality may be successfully reproduced in the receiving
instrument. … I have also succeeded in getting what might be considered as commercial
results by using rates of closure that, comparatively speaking, are as low as 3500
closures per second, this being practically the rate of the highest note which
characterizes vowel sounds."

At higher sampling rates, Miner found no perceptible improvement in speech quality,
probably because of other artifacts and errors in his rather crude system.

1.4