ADVANCES IN ENGINEERING MATERIALS AND APPLIED MECHANICS MMMMSSEE22001155__BBooookk..iinnddbb ii 99//1144//22001155 77::0066::3333 AAMM PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS SCIENCE AND ENGINEERING APPLICATIONS (MMSE 2015), WUHAN, HUBEI, CHINA, 27–28 JUNE 2015 Advances in Engineering Materials and Applied Mechanics Editors Guangde Zhang & Quanjie Gao Wuhan University of Science and Technology, Wuhan, China Qiang Xu School of Computing and Engineering, Huddersfield University, UK MMMMSSEE22001155__BBooookk..iinnddbb iiiiii 99//1144//22001155 77::0066::3344 AAMM CRC Press/Balkema is an imprint of the Taylor & Francis Group, an informa business © 2016 Taylor & Francis Group, London, UK Typeset by V Publishing Solutions Pvt Ltd., Chennai, India Printed and bound in China by CTPS DIGIPRINTS All rights reserved. No part of this publication or the information contained herein may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, by photocopying, recording or otherwise, without written prior permission from the publisher. Although all care is taken to ensure integrity and the quality of this publication and the information herein, no responsibility is assumed by the publishers nor the author for any damage to the property or persons as a result of operation or use of this publication and/or the information contained herein. Published by: CRC Press/Balkema P.O. Box 11320, 2301 EH Leiden, The Netherlands e-mail: [email protected] www.crcpress.com – www.taylorandfrancis.com ISBN: 978-1-138-02834-0 (Hbk) ISBN: 978-1-315-68084-2 (eBook PDF) MMMMSSEE22001155__BBooookk..iinnddbb iivv 99//1144//22001155 77::0066::3344 AAMM Advances in Engineering Materials and Applied Mechanics – Zhang, Gao & Xu (Eds) © 2016 Taylor & Francis Group, London, ISBN 978-1-138-02834-0 Table of contents Preface xiii Sponsors xv Conference committees xvii Advanced engineering materials Research on precipitation of Ti-containing compound in ER50-G wire production 3 T. Chen, H. Li, K. Wu, Q. Tong, N.B. Lv & M. Yi Optimization of experimental parameters to the formation of ZrO phase 2 via hydrothermal method 11 H.Z. Yang, L.Z. Han, L.A. Zhao, Z.Z. Zhi & Y. Ji Advanced manufacturing and automation technology Conventional missile structural configuration design based on secondary development of UG 19 J. Li & X. Li Research on data structure and data management of MBD for shipbuilding 25 M.Y. Li, W. Xu, W.J. Zhang & W.W. Wang Pressure sensor testing system based on PCI data acquisition card 33 C.L. Tan, H.L. Liu & Y.B. Wang Research on fault online diagnosing method of motor based on fuzzy mathematics 41 Y. Wang Mo coating on AISI 4340 steel deposited by supersonic plasma spraying and HVAS 47 Z.X. Yang, G.M. Liu & Y. Wang Research of the coating textiles’ coating Gram weight measurement system based on infrared 53 A.H. Zhang, W.P. Du, S.Y. Ma & P. Liao Microstructure and properties of TiC-Ni(Mo) cermet composite coating prepared by Self-propagating High-temperature Synthesis 57 X.Y. Zhang, J. Tan, W. Ren & M.L. Dong Aerospace science and technology Measurement of the main performance of Model ZDB-1320 cryopump 65 R.P. Shao, W. Sun, Y.S. Zhao, L.C. Sun & Y. Wang Evaluation of influence factors on the portable ultrasonic leak detection method for the space station on orbit 71 W. Sun, R.X. Yan, L.C. Sun, Y. Wang & W.D. Li v MMMMSSEE22001155__BBooookk..iinnddbb vv 99//1144//22001155 77::0066::3344 AAMM Leak testing of Chinese Space Laboratory hatch in a thermal vacuum environment 79 L. Wang, E.J. Liu & L.C. Sun Coaxial compound helicopter transition balancing analysis 85 M.L.W. Wu & M. Chen Based on the orthogonal experiment optimization of UAV wing bionic airfoil design 91 J. Zhang, B.S. Chen & X. Hua Applied mechanics Comparison of simulation on aerial conductor vibration damper power characteristics tested by two methods 101 L.Q. An, B. Yang & W.Q. Jiang Heat propagation properties of short laser heating based on time fractional single phase lagging model 107 Z. Han & G.Y. Xu The study of stress-strain reconstruction method based on EMD 113 D.L. Han Energy method for wheelset hunting instability mechanism study 121 L. Wu, M.R. Chi & J.S. Qin Insertion loss calculation and parameter sensitivity analysis for noise barrier with T-shape top structure 125 Y.S. Liu & Y. Wang A study of normal stiffness model of joint interfaces based on fractal theory 133 W.W. Liu, J.J. Yang, N. Xi, L.L. Li & J.F. Shen Research on the design method of combat resilience based on conflict matrix 139 S.S. Ma, S.Y. Yang & Y.X. Xu Performance analysis of a lattice material shock isolator 147 H.B. Mao, M.J. Wang & Y.Z. Huang Study the effect of long-period waves on mooring large vessel 153 W.J. Shen, F. Gao, Q. Chen & C.L. Mao Sensor placement method for structural response reconstruction 159 Z. Wan, Y.Z. Huang, T. Wang & H.B. Mao Optimized implicit DRP scheme using exponential objective function 165 J.L. Wang, Q.B. Huang, H.B. Mao & T.L. Yang Numerical simulation of flow field of a novel helical static mixer for polymer flooding 171 W.P. Song, Y.Q. Li, L.Q. Li, H.Q. Zhang & B. Guo Research and experiment analysis on the bending stress of the collet connector 177 D.M. Wang, C.P. Yang, X. He, J. Liu, F.H. Yun, T. Liu, R.H. Wang & L.Q. Wang In-plane vibration analysis of moderately thick rectangular plates 185 J.F. Wang, S.W. Wang, W. Mu & P. Gao Isogeometric Analysis for nonlocal elasticity problems 191 T. Wang, X. Wang, Y. Hu & Z. Wan Filtering and de-noising of the rolling bearing vibration signal with EMD 197 X.C. Wang & Y. Xuan vi MMMMSSEE22001155__BBooookk..iinnddbb vvii 99//1144//22001155 77::0066::3344 AAMM Effects of rotor–rotor interactions in a counter-rotating fan 203 H.M. Zhang, X.Q. Huang & X. Zhang Research on parameters influencing flutter characteristics of transonic fan blade 209 X. Zhang, X.Q. Huang, H.M. Zhang & Y.C. Chen A study on the self-excited vibration of driving system during locomotive slippage 217 L. Zhiyuan & D. Huanyun Heat transfer analysis with transverse effect of a curved corrugated-core sandwich panel 223 W.C. Qi & S.M. Tian The simulation technique of spacecraft taking off on lunar based on cable-driven parallel mechanism 229 W.M. Yi & W. Feng Automation Application of computer image processing technology in fuse safety detector 237 D.B. Zhang, W.Q. Huang, Z.W. Li & X.Y. Li Design of the detection and maintenance equipment for X-type fire control system 245 D.B. Zhang, X.Y. Li, Z.W. Li & C.A. Qiao The gas leak locating detection based on the improved ultrasonic transducer array group 251 Y. Pei Design of population statistics system based on real-time color video images 257 Q.Y. Zhang, X.P. Meng, H.Z. Xu & K.X. Chen Automation, control, system modeling and simulation Path planning with PSO for autonomous vehicle 263 L. Cai & J.P. Jia Research on high-efficiency rotating screen printing control system of ceramic tile 267 L.G. Cao, H.P. Pan, L. Zhang & H. Feng The design of material sorting system based on S7-200 273 H.X. Wu Research on high precision linear motor control system based on adaptive fuzzy-PID control 279 J.F. Xiao, F.H. Zhu & Q.M. Xiao Dispose of communication signals Adaptive recognition algorithm for digital modulation communication signal 289 C.Y. Wang, W.L. Yu & M.Y. Hou Electronic design engineering Design of digital multi-channel temperature acquisition system 297 L. Wan vii MMMMSSEE22001155__FFMM..iinndddd vviiii 99//1155//22001155 33::4499::1199 PPMM Machinery A new method for topology optimization of tip/tilt mirror 303 C.L. Wang & H.W. Wang Realization method of NURBS path generation for 5-axis CNC controller 309 L.J. Chen, H.Y. Li & H.J. Zhang The strength analysis of non-power bogie frame for the passenger high-speed train 315 H. Wu & C.S. Yue Design of control system for smart window 321 J. Lei Study of squeeze film damping characteristics in damper of linear rolling guide 325 L.L. Li, J.J. Yang & W.W. Liu Pre-tension analysis of the tractor anchor wire in anchorage construction 331 Z.L. Liu, P.P. Ma & H. Zhou Serial port expansion technologies based on the VK series chip 337 Y.X. Lu & Z.Y. Cai Cutting tool wear monitoring by Empirical Mode Decomposition method based on wavelet packet analysis 343 M.H. Shao, W. Li, S.C. Li, S.Y. Wang & L. Wei Reliability analysis of component in series system using masked data 349 X.L. Shi Failure calculating and risk assessment method of crane parts 355 Z.Y. Xie, F.Z. Qu, D.G. Pan, Q.L. Yang & X. Zhao Research on rubber damper dynamic model 363 J. Yang, M.R. Chi, M.H. Zhu, J. Zeng & P.B. Wu Bed–chair integration—new developing trend of helpage assistive robot 371 L.Z. You, S.D. Zhang & L.D. Zhu Research on decelerator based on Planetary Roller Screw 377 D.Y. Yu, D.X. Sun & X.W. Tong Combustion simulation of opposite axial piston engine with unsymmetrical cam 383 L. Zhang, C.Y. Pan, R. Zhen, J.Y. Tan & S.X. Li Simulation analysis of basic motion performance of a tracked efficient steering platform 389 Y.N. Zhang, J. Zhang, T. Huang & H.B. Yang Design and implementation of the tensioning device in the underwater diamond wire saw machine 395 H. Zhang Design of underwater cover opening mechanism for autonomous underwater vehicle 401 H. Zhang Analysis on cooling air of engine compartment inlet section 407 H.K. Cai, Y.L. Zhang, Y. Xiang, W.Z. Yang & D.X. Deng The study of characteristics in flat-tube radiator based on multiple rows 413 H.K. Cai, Y.L. Zhang, T.F. He, C. Li & Y.X. Zhang viii MMMMSSEE22001155__FFMM..iinndddd vviiiiii 99//1155//22001155 66::5500::2200 AAMM Research on the acquisition of steering performance parameters of armored vehicle based on experiments 421 H.Y. Wang, B. Chen, S.L. Li, Q. Rui, Q.L. Wang & J. Guo Research and development of on-line visual inspection and traceability system for robot glue spreading quality of car engine hood 427 R.F. Li, Y.Y. Wang, K. Wang & G.L. Sun Research on the control method of hydro-viscous speed control system based on system identification 433 L.G. Ma, C.L. Xiang, T.G. Zou & J.W. Zhang Calculation method and testing verification of ground traction of tracked vehicle 443 S.L. Li, H.Y. Wang, B. Chen, Q. Rui & J. Guo Condition assessment of hydraulic pump based on fuzzy comprehensive evaluation 449 C. Wu, Y.F. Peng, X.Y. Mao, H.Y. Ding, J.H. Hu & Y. Liu Application of fault tree analysis diagnosis on the gearbox of certain type of self-propelled artillery 457 J.M. Yang, Z. Zhang, R.B. Zhou & C.F. Liu Design of automobile active suspension controller based on genetic algorithm 461 D. Zhao & Z.Q. Tang Machinery design Design of a novel dual-band metamaterial absorber 469 C.S. Tian, K. Zhou & Y.L. Guan Coiled tubing small turbo drill cascade design optimization and numerical simulation of the flow field 475 Q. Zhang, Z. Chen, X.H. Dong, F. Zhang & K.J. Luo Optimal design on dual-front-axle steering mechanism of a heavy vehicle based on simulated integration technology of iSIGHT and ADAMS software 481 H.N. Zhou, Y. Feng & Q. Hu Material science and advanced materials Research and analysis of giga-fatigue life of FV520B 491 Y.L. Zhang, J.L. Wang, Q.C. Sun & H. Zhang Synthesis of CaCO particles on stearic acid template 495 3 M. Cai, H.Y. Zeng, M.R. Jiao, Q.T. Cheng, S.P. Zhu & J.X. Jiang Study on the manufacturing technology of optical materials 501 Y. Chen Nucleation, crystallization and growth of CaCO grains on lauric acid template 3 during micropore dispersion carbonation 507 Q.T. Cheng, X.P. Gan, Z.L. Yan, M. Cai, H.Y. Zeng & J.X. Jiang Preparation of onion-based composite and study on its antimicrobial activity 511 X.N. Cheng, R.Y. Song, Y.F. Qian & J. Wei Acoustic absorption of MRF under different external field 517 Y.Z. Huang, S.D. Luo, H.B. Mao & T.L. Yang ix MMMMSSEE22001155__BBooookk..iinnddbb iixx 99//1144//22001155 77::0066::3344 AAMM Quantitative analysis of aflatoxins content in sweet corn at early stages using an improved electronic nose 523 K.J. Huang, J. Song & C. Zhu Mold filling and defects of Ti-6Al-4V alloy during centrifugal casting 531 L.M. Jia, R.L. Liu, J.X. Li, S.H. Wei & Y.Z. Li Design of HBc-based nanoparticles for efficient delivery of MEF2D siRNA and induction of apoptosis of hepatoma cells 537 J. Kong & X.P. Liu The X-ray powder diffraction data and crystal structure of AlCuDy ternary 2 3 compound 543 D.G. Li, L.Q. Liang, S.H. Liu, M. Qin, B. He, C.S. Qin, C.B. Li, Y.Z. Huang & L.M. Zeng Molecular Dynamics simulation of Ni thin film growth on Cu (001) substrate 547 Y.J. Li, Y.J. Mo, J.N. Huang & S.J. Jiang Application of dendrimer modified montmorillonite in EPDM composites 555 R.M. Li, C. Pan, J.M. Wu & J.C. Wang Mechanisms and microstructure evolution in pure iron by PM under tensile load 559 L. Li & Z.M. Shi Simulation research on constant pressure system of synchronous generator based on two-dimensional cloud model PID 565 Z.Z. Li & C.J. Shi Numerical simulation and experimental verification of long-rod projectile penetration into A95 ceramic composite armor 571 R.Y. Li & Y.X. Sun Experimental investigation and penetration analysis of ceramic composite armors subjected to ballistic impact 577 W.L. Liu, Z.F. Chen, G.F. Liu, X.H. Chen, X.W. Cheng & Y.W. Wang Phase behavior of new biodegradable polycarbonate containing diosgenyl units 583 Z.T. Liu, Y.N. Wang, Y.J. Liu & J.S. Hu Reaction mechanisms in formation of silicon carbide using SiO and CH gases 4 on various solid surfaces 587 X. Ma & K. Tang A simple method for the synthesis of Mo2N hollow nanospheres with high surface area 593 Y. Tang & W. Luo The effect of delamination on damage behavior of composite laminates subjected to three-point bending 599 J. Tang, S.L. Xing, J.Y. Xiao, Z.H. Wu, S.W. Wen & S. Ju The dielectric properties of electron irradiated P(VDF-TrFE-CFE) thin film 609 L. Tian, L. Li, J. Sun, X.H. Zhang & Y.P. Li Influences of bottom heater arrangements on temperature and stress fields during initial cooling of Kyropoulos sapphire growth 615 S. Wang, M.Y. Wang, Z. Zhang & H.S. Fang The surface ring coarse grain structure and control measures of ultra-low carbon steel hot-rolled wire 623 K. Wang, J.M. Zhang, L.F. Wang & N.B. Lv x MMMMSSEE22001155__BBooookk..iinnddbb xx 99//1144//22001155 77::0066::3344 AAMM