Advanced research on intelligent systems and mechanical engineering : selected, peer reviewed papers from the 2012 2nd International Conference on Intelligent Materials and Mechanical Engineering (MEE2012), December 22-23, 2012, Yichang, China

398 Pages·2013·22.732 MB·English

by  David Jin, Helen Zhang, X J Zhao

Advanced Research on
Intelligent Systems and
Mechanical Engineering
Edited by
Helen Zhang
David Jin
X.J. Zhao
Advanced Research on
Intelligent Systems and
Mechanical Engineering
Selected, peer reviewed papers from the
2012 2nd International Conference on
Intelligent Materials and Mechanical Engineering
(MEE2012),
December 22-23, 2012, Yichang, China
Edited by
Helen Zhang, David Jin and X.J. Zhao
Copyright  2013 Trans Tech Publications Ltd, Switzerland

All rights reserved. No part of the contents of this publication may be reproduced or
transmitted in any form or by any means without the written permission of the
publisher.

Trans Tech Publications Ltd
Kreuzstrasse 10
CH-8635 Durnten-Zurich
Switzerland
http://www.ttp.net

Volume 644 of
Advanced Materials Research
ISSN print 1022-6680
ISSN cd 1022-6680
ISSN web 1662-8985

Full text available online at http://www.scientific.net

Distributed worldwide by and in the Americas by
Trans Tech Publications Ltd Trans Tech Publications Inc.
Kreuzstrasse 10 PO Box 699, May Street
CH-8635 Durnten-Zurich Enfield, NH 03748
Switzerland USA
Phone: [phone]
Fax: [phone] Fax: [phone]
e-mail: [email protected] e-mail: [email protected]
Preface

MEE2012 is a comprehensive conference,and it is an integrated conference concentrating its focus
upon Intelligent Systems and Mechanical Engineering . In the proceeding, you can learn much more
knowledge about Intelligent Systems and Mechanical Engineering of researchers all around the
world. The main role of the proceeding is to be used as an exchange pillar for researchers who are
working in the mentioned field. In order to meet high standard of Advanced Material Research,the
organization committee has made their efforts to do the following things. Firstly, poor quality paper
has been refused after reviewing course by anonymous referee experts. Secondly, periodically
review meetings have been held around the reviewers about five times for exchanging reviewing
suggestions. Finally, the conference organization had several preliminary sessions before the
conference. Through efforts of different people and departments, the conference will be successful
and fruitful.

MEE2012 is co-sponsored by ISER Association, Beijing Gireida Education Research Center and
VIP-Information Conference Center,China. The goal of the conference is to provide researchers
from Intelligent Systems and Mechanical Engineering fields with a free exchanging forum to share
the new ideas, new innovation and solutions with each other. In addition, the conference organizer
will invite some famous keynote speaker to deliver their speech in the conference. All participants
will have chance to discuss with the speakers face to face, which is very helpful for participants.

During the organization course, we have got help from different people, different departments,
different institutions. Here, we would like to show our first sincere thanks to Mr. Thomas
Wohlbier,Anne and Trans Tech Publications for their kind and enthusiastic help and support for our
conference. Secondly, the authors should be thanked too for their enthusiastic writing attitudes
toward their papers. Thirdly, all members of program chairs, reviewers and program committees
should also be appreciated for their hard work.

In a word, it is the different team efforts that they make our conference be successful on December
22-23,2012,Yichang. We hope that all of participants can give us good suggestions to improve our
working efficiency and service in the future. And we also hope to get your supporting all the way.
Next year, In 2013, we look forward to seeing all of you at MEE2013.

November, 2012

MEE2012 committee
Committee

Honor Chairs
Prof. Chen Bin, Beijing Normal University,China
Prof. Hu Chen, Peking University,China
Chunhua Tan, Beijing Normal University,China
Helen Zhang, University of Munich,China
Program Committee Chairs
Xiong Huang, International Science& Education Researcher Association,China
LiDing, International Science& Education Researcher Association,China
Zhihua Xu, International Science& Education Researcher Association,China
Organizing Chair
ZongMing Tu, Beijing Gireida Education Co.Ltd,China
Jijun Wang, Beijing Spon Technology Research Institution,China
Quanxiang, Beijing Prophet Science and Education Research Center,China
Publication Chair
Zhihua Xu, International Science& Education Researcher Association,China
Sally Wang, Beijing Normal University,China
Committee
Sally Wang, Beijing normal university,China
LiLi, Dongguan University of Technology,China
BingXiao, Anhui university,China
Z. L. Wang, Wuhan university,China
Moon Seho,Hoseo University,Korea
Kongel Arearak,Suranaree University of Technology,Thailand
Zhihua Xu, International Science& Education Researcher Association,China
Xiangrong Jiang, Wuhan University of Technology,China
LiHu, Linguistic and Linguidtic Education Association,China
Moon Hyan,Sungkyunkwan University, Korea
Guangwen, South China University of Technology,China
Jack.H. Li, George Mason University, USA
Marry. Y. Feng, University of Technology Sydney, Australia
Li Hu, Wuhan University of Science and Technology, China,
ZhongYan, Wuhan University of Science and Technology, China
Haiquan Huang, Hubei University of Technology,China
Xiao Bing, WUhan University, China
Brown Wu, Sun Yat-Sen University, China
Co-sponsored by
International Science& Education Researcher Association, China
Beijing Gireida Education Research Center
VIP-Information Conference Center,China
Table of Contents
Preface and Committee
Chapter 1: Research and Engineering in the Field of Control and
Intelligent Systems
Design of Intelligent Living Room Environment’s Control System with Intelligent Materials
J. Yu, Y.W. Zhai and X.H. Li 3
Research and Application of Intelligent Consultation and Diagnosis Platform with
Intelligent Materials for Rice Pests and Diseases
H.W. Yang, L.Y. Zhang and F. Zhang 8
The Intelligent Home Gated Security and Defense System Design with Intelligent Materials
Based on GSM Module TC35
Z.H. Xin, Q.X. Song, L.Y. Hu, X.W. Li and S.Q. Xu 12
Traffic Sign Recognition Method in Intelligent Transport System Based on the Low-Rank
Approximation
M.X. Xiao and H.L. Zhang 16
Development of New Intelligent High Potential Therapeutic Apparatus with Intelligent
Materials
L. Tong, T.D. Gao and Z.Q. He 20
Semantic Representation of Space Device and Material for Remote Sensing Satellite
H. Jiang, H. Sun and R.H.J. Massawe 25
The Research on End-Point Forecast and End-Point Control of Argon Oxygen Refining
Ferroalloy with Material Properties
H.D. Ke and H. Wang 29
Research on Geothermal Energy Using RS Land Surface Material with Temperature
Inversion Technology
J.F. Li and J.P. Chen 33
Study of Adaptive Control System of Magneto-Rheological Fluid Dampers with Mechanical
Properties Subject to Impact Loading
L.J. Zhang, X.L. Sun and J. Wang 37
Research on Performance Influence of the Coin Recognition Device by Coil Parameters
Based on Mechanical Properties
G. Lei, X. Yin and X.F. Liu 42
The Development of Automatic Electronic Granulation Counter Based on Mechanical
Properties
X.M. Sui, X.W. Sui and L. Liu 47
Study on the Online Detecting Technology for Partial Discharge of Power Equipment with
Mechanical Properties
G.J. Chen, M. Xu, T.T. Liu, J. Ni, D. Xie and Y.P. Zhang 51
Study on Sensor with Mechanical Properties in Nuclear Power Plant with Application of BP
Neural Network to Fault Tolerant Control
J.Y. Li, H. Xia and S.Y. Cheng 56
Research on the Remote Monitoring System of Photovoltaic Power Station Based on CAN
Bus and GPRS with Mechanical Properties
K.F. Li and W.P. Luo 60
Research on Electronic Expansion Valve Opening Mechanical Properties of Multi-Link
Inverter Air-Con Based on Neural Network
L.H. Guo and W.Q. Hu 64
Application of Fuzzy Neural Network to Fault Diagnosis of Sensor with Mechanical
Properties in Nuclear Power Plant
J.Y. Li and H. Xia 68
Intelligent Control of Valve-Controlled Electro-Hydraulic System in Erecting Device Based
on Mechanical Mechanics
B. Deng, W.B. Su, B.S. Song, Q.Y. Guo and C.R. Liu 72
b Advanced Research on Intelligent Systems and Mechanical Engineering
Study on Autopilot Dynamics with Robust Guidance Law and Terminal Constraint in
Mechanical Engineering
Z.P. Li, J. Zhou and J.G. Guo 77
The Design of Variable Frequency Constant Pressure of Gas Conveying Control System in
Mechanical Engineering
Y. Chen, Y. Gao and Q.Q. Li 81
Simulation of Hydraulic Servo System Based on Dynamic Monitoring in Mechanical
Engineering
J.D. Dong and L.C. Gu 85
Finite Element Analysis and Design of Cylinder Shell Resonant Density Meter Based on
Mechanical Vibration and Fluid-Solid Interaction
X.M. Sui, X.W. Sui and D.L. Ren 89
Four Synchronous Transfer Mode of USB in Mechanical Engineering
X.P. Liu and D.M. Zhao 93
The Design of Cutting Tools Database in Mechanical Engineering
X.P. Liu and D.M. Zhao 97
The Development of Air Suspension Controller in Mechanical Engineering Based on DSP
Z.W. Zhang, C. Chen, R.B. Jiao and R.R. Hu 101
Fault Pattern Recognition for Partial Discharge of Electrical Power Equipment Based on
Properties of Electrical Materials
G.J. Chen, M. Xu, T.T. Liu, J. Ni, D. Xie and Y.P. Zhang 105
Research on Extracting Vehicle Fault Symptoms Based on Rough Sets Theory in
Mechanical Engineering
C.S. Wang 110
Feedback Linearization Control for PMSG Wind Power Generation System with
Application of Wind Turbine in Mechanical Engineering
N. Li and W. Wang 115
The Design of INS under ITS Mechanical Properties for Vehicles in Mechanical
Engineering
M.Q. Chen, K.J. Xu and Y. Qian 119
Stability Control and Simulation of Wheel-Legged Mobile Robot in Mechanical Engineering
L.Y. Sun, J.H. Zhang and X.J. Zhang 123
Control Simulation for Two-Wheeled Self-Balancing Robot Linear Move Based on Active
Disturbance Rejection Controller
D.P. Ye, J.M. Yu and Y.Z. Zhou 129
Chapter 2: Materials Science and Processing
The Application of Step-by-step Stretching Method in Solving Tensile Parts Scratch Defects
in Material Application Engineering
Z.Y. Yang and Y.J. Sheng 137
Microwave Synthesis and Characterizations of Ni Zn Fe O Ferrite Powder
0.5 0.5 2 4
Y.D. Peng, Q.L. Xia, L.Y. Li, R. Bao, J.M. Ran and J.H. Yi 141
Influence of Microstructures on Wettability on Stainless Steel
T. Fu, Y. Tang, L. Guo, Z.P. Wan and W.J. Luo 145
Elastic-Plastic Contact Analysis of a Deformable Sphere and a Rigid Flat with Friction
Effect
L. Wang and Y. Xiang 151
Interaction Parameter of BaO-Bi O -B O -SiO Glasses
2 3 2 3 2
M. Zhang, X. Han, D.W. Yu and X.Y. Zhao 157
Effect of Film Thickness and Annealing Time on Residual Stress of High-k Al O Film on
2 3
Si-(100) Substrate
W. Tang, J.J. Yang and C.M. Li 161
Study on the Optimization of Absorption Baffle with Coating Material
W.Y. Guo, L.G. Chen and Y. Cao 165
Study on the Experimental of the Electrical Discharge Machining Titanium Alloy on Gas
Dielectric
S.G. Zhao, X.M. Yao and R. Li 171
Helen Zhang, David Jin and X.J. Zhao c
Deformation Characteristics and Load-Bearing Capacity of NO.21 Coal Seam’s Mudstone
Floor in Western Henan
J.P. Wei, F. Chen and Z.H. Ding 175
Measurement of Material Surface Reflectivity Distribution Based on 3D Image LADAR
T.G. Zhao and M. Yu 179
Study on Kinetics and Biocompatibility Evaluation of Multiple Polymer Layer with
Biochemical Material Properties in Drug-Eluting Stent
S. Pavlinich, X.W. Liu, H. Zhao, Z. Li and L. Li 183
Numerical Analysis of Bi-Adhesive Boded Single Lap Composite Joint with Mechanics
Analysis
M. You, P. Wang, H.Z. Yu, M. Li and Y.L. Zhao 189
Numerical Analysis of Impact Velocity on the Responses of Adhesively Bonded Steel Butt
Joint with Material Properties
M. You, K. Liu, H.Z. Yu, L. Wu and M. Li 193
Effect of Notch Depth on the Butt-Joint under Izod Impact Test with Material Properties
and Mechanics Analysis
X.L. Zheng, M. Li, M. You, W.J. Liu and K. Liu 197
Chapter 3: General Mechanical Engineering
Fuel Leaking Analysis of Fuel Tank by Projectiles Impact with Mechanical Properties of
Projectiles
H.L. Cai, B.F. Song, Y. Pei and S. Shi 203
Free Vibration Analysis of Composite Wings Using Differential Quadrature Method with
Mechanical Properties
Y.P. Xiao, Y.R. Yang and Y. Qian 207
The Research of Using Step Function to Simulate the Step-Movement of Forklift Machine in
Mechanical Engineering Based on ADAMS
Q.F. Cui, X.R. Li and J.Z. Wang 212
Numerical Analysis and Optimal Design Investigation on Air Duct of Tent Air-Conditioner
Z.M. Wan, Z.Y. Zheng, J.H. Wan, J. Liu, C.Q. Huang and L. Wang 216
Study on Component Library for Storing Mechanical Devices with Mechanical Properties
H. Sun, S.B. Cai, J. Weng and R.H.J. Massawe 221
Common Failure Analysis of Diesel Engine Fuel Supply System Based on Mechanical
Properties
H.X. Shi, G.Q. Wang, Y. Liu and X.J. Zhou 225
A New Design of Pipe Robot with Mechanical Properties in Mechanical Engineering
S.C. Nian, H.X. Sun, Y.H. Zhang and W. Chen 230
Research on Movement Stability of Robotic Arm Driven by Antagonistic Pneumatic
Artificial Muscle with Mechanical Properties
J.X. Zhu, Y. Wang and H.T. Tong 235
Research on the Vibration Characteristics of a Ship Engine-Base System
D.D. You, L.P. Sun, S.M. Ai and Y.Y. Liu 239
Effect of the Metal Block on the Stress Distributed in the Adhesively Bonded Single Lap
Steel Joint
M. You, L.H. Song, J.C. Zhang and M. Li 243
Application and Development on Electric Power Facilities with Vibration Isolator to
Control and Minimize the Mechanical Vibration
Z.C. Lu 247
Study on Local Strain Field Intensity Approach for Prediction Fatigue Life of Crankshaft
Based on Mechanical Mechanics
K. Bao, Q.F. Wang, S.L. Liu and Z.L. Wei 251
Research on Expansion Technique of Lateral Supporting Structure in Explosive
Neutralization System Based on Mechanical Mechanics
Y. Hu and H. Zhang 256
Theoretical Analysis and Experimental Research on Cluster Bomb Warhead Built Pressure
Device Based on Mechanical Mechanics
H. Zhang 260
d Advanced Research on Intelligent Systems and Mechanical Engineering
Kinematic Analysis and Simulation of a Novel Continuum Robot for Search and Rescue
G.Z. Meng, L.Y. Sun, M.L. Zhang, X.C. Meng and H.M. Wang 265
Virtual Prototype Design of Spherical Material Vibration Grader Machine Based on
ADAMS
X.R. Li and K.D. Wang 271
Numerical Simulation of Unsteady Aerodynamic Loads over an Aerofoil in Transonic Flow
Y. Qian, J.L. Yang, X.J. Xiang and M.Q. Chen 275
Analysis and Study for Plate Heat Exchanger Based on FLUENT Soft
Z.P. Guo, P.F. Zhou, L.L. Bai, J.Z. Yang, Y.G. Meng and Y.G. Du 279
The Design of Plate Heat Exchanger Prototype Test Bench Based on Similarity Theory
P.F. Zhou, Z.P. Guo, L.L. Bai, J.Z. Yang, Y.G. Meng and J.M. Hao 284
Study on Matching Electromagnet Retarder for City Bus with Force Analysis Based on
Brake Directional Stability
W.H. Wang and J. Li 288
Noise Control on Chiller with Ammonia Based on Vibration-Acoustics Analysis in
Mechanical Engineering
H. Liu, C.Z. Chen and H. Zhou 294
Study on Calculations of Geometric Dimensions and Modification Coefficients of Planetary
Gear Reducer of Less Tooth Difference with Biasing Crankshaft Based on Matlab
Q. Xu, Q.S. Xu and D.Y. Xu 298
Diagnosis Research on Main Bearing Wear of Gasoline Engines in Mechanical Engineering
C.S. Wang 304
Research on Analysis of Lubrication Oil in Fault Diagnosis of Vehicle Engine in Mechanical
Engineering
J. Gu and J.J. Zhou 308
Wind Turbine Gearbox Fault Detection Based on Multifractal Analysis
C.Z. Chen, P.P. Pan, Q. Meng and Y.L. Gu 312
The Co-Simulation Study on Electronic Unit Pump Diesel in Mechanical Engineering
C.X. Ji, Y.R. Jiang, E.Z. Song, M.L. Yin and J. Sun 317
Wheeled Robot Design and Research with Novel Hybrid Variable Structure Leg in
Mechanical Engineering
D.Y. Zhu, M.L. Zhang and T.H. Gao 321
The Research on the Dynamics of High-Speed Friction and Wear Test System in
Mechanical Engineering
J.G. Sun, T.J. Li, X.S. Zhang and M.Y. Chen 326
Study on Periodic Time Series of Rotating Machines Using Multifractal Theory Based on
Mechanical Mechanics
C.Z. Chen, Q. Meng, Q. Gu, Y. Gou and X.G. Zhao 333
Fault Diagnosis of the Wind Turbine Main Bearing through Multifractal Theory
Q. Gu, C.Z. Chen, X.J. Kong, X.M. Sun, B. Zhou and Y.L. Gu 337
The Comparative Analysis of Calculating the Equivalent Conicity Methods in Vehicles of
Mechanical Engineering
F.T. Lin, Y.M. Wang and X.Q. Dong 341
Wind Turbine Generator Fault Detection by Wavelet-Based Multifractal Analysis
C.Z. Chen, Y. Zhang, Q. Gu and Y.L. Gu 346
Chapter 4: Related Topics
The Application of the Steel Materials in Large-Span Cantilever Composite Structure
N. Geng 353
Three Dimensional Finite Element Analysis of Reinforced Concrete Rectangular-Sectioned
Aqueduct
D.Y. Ji 358
Finite Element Simulation Analysis for Gravity Wall Rockfill Dam of Gaozhai Reservoir
with Engineering Mechanics
K.D. Liu 362
Application Analysis of Vibrating Wheel-Soil Model Based on ABAQUS
Y.W. Cao, L. Xiang, L.Y. Ma and Z.J. Li 366